regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage setting

The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the
voltage for the buck regulators 1, 2 and 3. This has no effect as the
PRESET_EN bit is set by default and therefore the preset values are used
instead, which are set to 850 mV.

To fix this we clear the PRESET_EN bit at time of initialization.

Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Cc: <[email protected]>
Signed-off-by: Frieder Schrempf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 89b806be399f1f0d8a52aa67940a05a1821cd98d..2f7ee212cb8c9d2b3b70e8900bff8c3bf461be04 100644 (file)
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -797,6 +797,14 @@ static int pca9450_i2c_probe(struct i2c_client *i2c,
                return ret;
        }
 
+       /* Clear PRESET_EN bit in BUCK123_DVS to use DVS registers */
+       ret = regmap_clear_bits(pca9450->regmap, PCA9450_REG_BUCK123_DVS,
+                               BUCK123_PRESET_EN);
+       if (ret) {
+               dev_err(&i2c->dev, "Failed to clear PRESET_EN bit: %d\n", ret);
+               return ret;
+       }
+
        /* Set reset behavior on assertion of WDOG_B signal */
        ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
                                WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12);

diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
index ccdb5320a2406a400a3c111c4a3cd5557c6b5fce..71902f41c91999d21cc037e9c9d1731a71844f0f 100644 (file)
--- a/include/linux/regulator/pca9450.h
+++ b/include/linux/regulator/pca9450.h
@@ -147,6 +147,9 @@ enum {
 #define BUCK6_FPWM                     0x04
 #define BUCK6_ENMODE_MASK              0x03
 
+/* PCA9450_REG_BUCK123_PRESET_EN bit */
+#define BUCK123_PRESET_EN              0x80
+
 /* PCA9450_BUCK1OUT_DVS0 bits */
 #define BUCK1OUT_DVS0_MASK             0x7F
 #define BUCK1OUT_DVS0_DEFAULT          0x14