Bluetooth: ath3k: Fix multiple issues reported by checkpatch.pl

This fixes some CHECKs reported by the checkpatch script.

Issues reported in ath3k.c:
-------
ath3k.c
-------
CHECK: Please don't use multiple blank lines
+
+

CHECK: Blank lines aren't necessary after an open brace '{'
+static const struct usb_device_id ath3k_blist_tbl[] = {
+

CHECK: Alignment should match open parenthesis
+static int ath3k_load_firmware(struct usb_device *udev,
+                               const struct firmware *firmware)

CHECK: Alignment should match open parenthesis
+               err = usb_bulk_msg(udev, pipe, send_buf, size,
+                                       &len, 3000);

CHECK: Unnecessary parentheses around 'len != size'
+               if (err || (len != size)) {

CHECK: Alignment should match open parenthesis
+static int ath3k_get_version(struct usb_device *udev,
+                       struct ath3k_version *version)

CHECK: Alignment should match open parenthesis
+static int ath3k_load_fwfile(struct usb_device *udev,
+               const struct firmware *firmware)

CHECK: Alignment should match open parenthesis
+               err = usb_bulk_msg(udev, pipe, send_buf, size,
+                                       &len, 3000);

CHECK: Unnecessary parentheses around 'len != size'
+               if (err || (len != size)) {

CHECK: Blank lines aren't necessary after an open brace '{'
+       switch (fw_version.ref_clock) {
+

CHECK: Alignment should match open parenthesis
+       snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
+               le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");

CHECK: Alignment should match open parenthesis
+static int ath3k_probe(struct usb_interface *intf,
+                       const struct usb_device_id *id)

CHECK: Alignment should match open parenthesis
+                       BT_ERR("Firmware file \"%s\" not found",
+                                                       ATH3K_FIRMWARE);

CHECK: Alignment should match open parenthesis
+               BT_ERR("Firmware file \"%s\" request failed (err=%d)",
+                                               ATH3K_FIRMWARE, ret);

total: 0 errors, 0 warnings, 14 checks, 540 lines checked

Signed-off-by: Uri Arev <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 88262d3a93923a3cc3ea4698d08f2619dbe5d727..ce97b336fbfb8aad7d3d5b6e5ab49feb022762d3 100644 (file)
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -3,7 +3,6 @@
  * Copyright (c) 2008-2009 Atheros Communications Inc.
  */
 
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -128,7 +127,6 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
  * for AR3012
  */
 static const struct usb_device_id ath3k_blist_tbl[] = {
-
        /* Atheros AR3012 with sflash firmware*/
        { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
        { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
@@ -202,7 +200,7 @@ static inline void ath3k_log_failed_loading(int err, int len, int size,
 #define TIMEGAP_USEC_MAX       100
 
 static int ath3k_load_firmware(struct usb_device *udev,
-                               const struct firmware *firmware)
+                              const struct firmware *firmware)
 {
        u8 *send_buf;
        int len = 0;
@@ -237,9 +235,9 @@ static int ath3k_load_firmware(struct usb_device *udev,
                memcpy(send_buf, firmware->data + sent, size);
 
                err = usb_bulk_msg(udev, pipe, send_buf, size,
-                                       &len, 3000);
+                                  &len, 3000);
 
-               if (err || (len != size)) {
+               if (err || len != size) {
                        ath3k_log_failed_loading(err, len, size, count);
                        goto error;
                }
@@ -262,7 +260,7 @@ static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
 }
 
 static int ath3k_get_version(struct usb_device *udev,
-                       struct ath3k_version *version)
+                            struct ath3k_version *version)
 {
        return usb_control_msg_recv(udev, 0, ATH3K_GETVERSION,
                                    USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
@@ -271,7 +269,7 @@ static int ath3k_get_version(struct usb_device *udev,
 }
 
 static int ath3k_load_fwfile(struct usb_device *udev,
-               const struct firmware *firmware)
+                            const struct firmware *firmware)
 {
        u8 *send_buf;
        int len = 0;
@@ -310,8 +308,8 @@ static int ath3k_load_fwfile(struct usb_device *udev,
                memcpy(send_buf, firmware->data + sent, size);
 
                err = usb_bulk_msg(udev, pipe, send_buf, size,
-                                       &len, 3000);
-               if (err || (len != size)) {
+                                  &len, 3000);
+               if (err || len != size) {
                        ath3k_log_failed_loading(err, len, size, count);
                        kfree(send_buf);
                        return err;
@@ -425,7 +423,6 @@ static int ath3k_load_syscfg(struct usb_device *udev)
        }
 
        switch (fw_version.ref_clock) {
-
        case ATH3K_XTAL_FREQ_26M:
                clk_value = 26;
                break;
@@ -441,7 +438,7 @@ static int ath3k_load_syscfg(struct usb_device *udev)
        }
 
        snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
-               le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
+                le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
 
        ret = request_firmware(&firmware, filename, &udev->dev);
        if (ret < 0) {
@@ -456,7 +453,7 @@ static int ath3k_load_syscfg(struct usb_device *udev)
 }
 
 static int ath3k_probe(struct usb_interface *intf,
-                       const struct usb_device_id *id)
+                      const struct usb_device_id *id)
 {
        const struct firmware *firmware;
        struct usb_device *udev = interface_to_usbdev(intf);
@@ -505,10 +502,10 @@ static int ath3k_probe(struct usb_interface *intf,
        if (ret < 0) {
                if (ret == -ENOENT)
                        BT_ERR("Firmware file \"%s\" not found",
-                                                       ATH3K_FIRMWARE);
+                              ATH3K_FIRMWARE);
                else
                        BT_ERR("Firmware file \"%s\" request failed (err=%d)",
-                                                       ATH3K_FIRMWARE, ret);
+                              ATH3K_FIRMWARE, ret);
                return ret;
        }