The value (two's complement) to be programmed in the channel specific N correction register.
For remote channels only.
$ref: /schemas/types.yaml#/definitions/int32
- items:
- minimum: -128
- maximum: 127
+ minimum: -128
+ maximum: 127
required:
- reg
- [1-5]: order 1 to 5.
For audio purpose it is recommended to use order 3 to 5.
$ref: /schemas/types.yaml#/definitions/uint32
- items:
- minimum: 0
- maximum: 5
+ maximum: 5
"#io-channel-cells":
const: 1
iram:
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle pointing to the SRAM device node
- maxItems: 1
required:
- compatible
mediatek,vpu:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description:
Describes point to vpu.
mediatek,scp:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description:
Describes point to scp.
mediatek,vpu:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description:
Describes point to vpu.
mediatek,scp:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description:
Describes point to scp.
mediatek,scp:
$ref: /schemas/types.yaml#/definitions/phandle
- maxItems: 1
description: |
The node of system control processor (SCP), using
the remoteproc & rpmsg framework.
qcom,smem-state-names:
$ref: /schemas/types.yaml#/definitions/string
description: The names of the state bits used for SMP2P output
- items:
- - const: stop
+ const: stop
glink-edge:
type: object
qcom,remote-pid:
$ref: /schemas/types.yaml#/definitions/uint32
description: ID of the shared memory used by GLINK for communication with WPSS
- maxItems: 1
required:
- interrupts
description: |
Override the default TX fifo size. Unit is words. Ignored if 0.
$ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
default: 64
renesas,rx-fifo-size:
description: |
Override the default RX fifo size. Unit is words. Ignored if 0.
$ref: /schemas/types.yaml#/definitions/uint32
- maxItems: 1
default: 64
required: