MEI device performs link reset during system suspend sequence.
The link reset cannot be performed while device is in
runtime suspend state. The resume sequence is bypassed with
suspend direct complete optimization,so the optimization should be
disabled for mei devices.
Fixes:
[ 192.940537] Restarting tasks ...
[ 192.940610] PGI is not set
[ 192.940619] ------------[ cut here ]------------ [ 192.940623]
WARNING: CPU: 0
me.c:653 mei_me_pg_exit_sync+0x351/0x360 [ 192.940624] Modules
linked
in:
[ 192.940627] CPU: 0 PID: 1661 Comm: kworker/0:3 Not tainted
4.13.0-rc2+
#2 [ 192.940628] Hardware name: Dell Inc. XPS 13 9343/0TM99H, BIOS
A11
12/08/2016 [ 192.940630] Workqueue: pm pm_runtime_work <snip> [
192.940642] Call Trace:
[ 192.940646] ? pci_pme_active+0x1de/0x1f0 [ 192.940649] ?
pci_restore_standard_config+0x50/0x50
[ 192.940651] ? kfree+0x172/0x190
[ 192.940653] ? kfree+0x172/0x190
[ 192.940655] ? pci_restore_standard_config+0x50/0x50
[ 192.940663] mei_me_pm_runtime_resume+0x3f/0xc0
[ 192.940665] pci_pm_runtime_resume+0x7a/0xa0 [ 192.940667]
__rpm_callback+0xb9/0x1e0 [ 192.940668] ?
preempt_count_add+0x6d/0xc0 [ 192.940670] rpm_callback+0x24/0x90 [
192.940672] ? pci_restore_standard_config+0x50/0x50
[ 192.940674] rpm_resume+0x4e8/0x800 [ 192.940676]
pm_runtime_work+0x55/0xb0 [ 192.940678]
process_one_work+0x184/0x3e0 [ 192.940680]
worker_thread+0x4d/0x3a0 [ 192.940681] ?
preempt_count_sub+0x9b/0x100 [ 192.940683]
kthread+0x122/0x140 [ 192.940684] ? process_one_work+0x3e0/0x3e0 [
192.940685] ? __kthread_create_on_node+0x1a0/0x1a0
[ 192.940688] ret_from_fork+0x27/0x40 [ 192.940690] Code: 96 3a
9e ff 48 8b 7d 98 e8 cd 21 58 00 83 bb bc 01 00 00
04 0f 85 40 fe ff ff e9 41 fe ff ff 48 c7 c7 5f 04 99 96 e8 93 6b 9f
ff <0f> ff e9 5d fd ff ff e8 33 fe 99 ff 0f 1f 00 0f 1f 44 00 00 55
[ 192.940719] ---[ end trace
a86955597774ead8 ]--- [ 192.942540] done.
Suggested-by: Rafael J. Wysocki <[email protected]>
Reported-by: Dominik Brodowski <[email protected]>
Cc: Rafael J. Wysocki <[email protected]>
Cc: Dominik Brodowski <[email protected]>
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
pci_set_drvdata(pdev, dev);
+ /*
+ * MEI requires to resume from runtime suspend mode
+ * in order to perform link reset flow upon system suspend.
+ */
+ pdev->dev_flags |= PCI_DEV_FLAGS_NEEDS_RESUME;
+
/*
* For not wake-able HW runtime pm framework
* can't be used on pci device level.
pci_set_drvdata(pdev, dev);
+ /*
+ * MEI requires to resume from runtime suspend mode
+ * in order to perform link reset flow upon system suspend.
+ */
+ pdev->dev_flags |= PCI_DEV_FLAGS_NEEDS_RESUME;
+
/*
* For not wake-able HW runtime pm framework
* can't be used on pci device level.