]> Git Repo - linux.git/commitdiff
ARM: dts: am57xx-idk-common: add tc358778 bridge
authorTomi Valkeinen <[email protected]>
Fri, 17 Apr 2020 11:30:20 +0000 (14:30 +0300)
committerTony Lindgren <[email protected]>
Tue, 21 Apr 2020 16:46:27 +0000 (09:46 -0700)
AM5 IDK boards have TC358778 DPI-to-DSI bridge. Two different DSI panel
models are used with the AM5 IDKs, and these panels are added with DT
overlays. The AM5 IDKs can also be used without any panel.

Add TC358778 data to the am57xx-idk-common.dtsi, but set the status to
disabled.

Signed-off-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
arch/arm/boot/dts/am57xx-idk-common.dtsi

index aa5e55f981792885292dcc28cdce6f29fd3c22ea..8ec71342f289cf9aa8567010d582dcacafea2d63 100644 (file)
                regulator-boot-on;
        };
 
+       v1_2d: fixedregulator-v1_2d {
+               compatible = "regulator-fixed";
+               regulator-name = "V1_2D";
+               vin-supply = <&vmain>;
+               regulator-min-microvolt = <1200000>;
+               regulator-max-microvolt = <1200000>;
+               regulator-always-on;
+               regulator-boot-on;
+       };
+
        vtt_fixed: fixedregulator-vtt {
                /* TPS51200 */
                compatible = "regulator-fixed";
                        };
                };
        };
+
+       src_clk_x1: src_clk_x1 {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <20000000>;
+       };
 };
 
 &dra7_pmx_core {
                gpio-controller;
                #gpio-cells = <2>;
        };
+
+       dsi_bridge: tc358778@e {
+               compatible = "toshiba,tc358778", "toshiba,tc358768";
+               reg = <0xe>;
+               status = "disabled";
+
+               clocks = <&src_clk_x1>;
+               clock-names = "refclk";
+
+               vddc-supply = <&v1_2d>;
+               vddmipi-supply = <&v1_2d>;
+               vddio-supply = <&v3_3d>;
+
+               dsi_bridge_ports: ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               rgb_in: endpoint {
+                                       remote-endpoint = <&dpi_out>;
+                                       data-lines = <24>;
+                               };
+                       };
+               };
+       };
 };
 
 &mcspi3 {
 
 &dss {
        status = "okay";
+
+       vdda_video-supply = <&ldoln_reg>;
+
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                       reg = <0>;
+
+                       dpi_out: endpoint {
+                               remote-endpoint = <&rgb_in>;
+                               data-lines = <24>;
+                       };
+               };
+       };
 };
This page took 0.06357 seconds and 4 git commands to generate.