depends on HID
config HID_A4TECH
- tristate "A4 tech mice" if EXPERT
+ tristate "A4 tech mice"
depends on HID
default !EXPERT
---help---
game controllers.
config HID_APPLE
- tristate "Apple {i,Power,Mac}Books" if EXPERT
+ tristate "Apple {i,Power,Mac}Books"
depends on HID
default !EXPERT
---help---
Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes.
config HID_BELKIN
- tristate "Belkin Flip KVM and Wireless keyboard" if EXPERT
+ tristate "Belkin Flip KVM and Wireless keyboard"
depends on HID
default !EXPERT
---help---
- BETOP 2185 PC & BFM MODE
config HID_CHERRY
- tristate "Cherry Cymotion keyboard" if EXPERT
+ tristate "Cherry Cymotion keyboard"
depends on HID
default !EXPERT
---help---
Support for Cherry Cymotion keyboard.
config HID_CHICONY
- tristate "Chicony Tactical pad" if EXPERT
+ tristate "Chicony Tactical pad"
depends on HID
default !EXPERT
---help---
customizable USB descriptor fields are exposed as sysfs attributes.
config HID_CYPRESS
- tristate "Cypress mouse and barcode readers" if EXPERT
+ tristate "Cypress mouse and barcode readers"
depends on HID
default !EXPERT
---help---
different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
config HID_EZKEY
- tristate "Ezkey BTC 8193 keyboard" if EXPERT
+ tristate "Ezkey BTC 8193 keyboard"
depends on HID
default !EXPERT
---help---
Currently the following devices are know to be supported:
- MSI GT683R
-config HID_HUION
- tristate "Huion tablets"
- depends on USB_HID
- ---help---
- Support for Huion 580 tablet.
-
config HID_KEYTOUCH
tristate "Keytouch HID devices"
depends on HID
config HID_UCLOGIC
tristate "UC-Logic"
- depends on HID
+ depends on USB_HID
---help---
- Support for UC-Logic tablets.
+ Support for UC-Logic and Huion tablets.
config HID_WALTOP
tristate "Waltop"
Support for Twinhan IR remote control.
config HID_KENSINGTON
- tristate "Kensington Slimblade Trackball" if EXPERT
+ tristate "Kensington Slimblade Trackball"
depends on HID
default !EXPERT
---help---
- ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys)
config HID_LOGITECH
- tristate "Logitech devices" if EXPERT
+ tristate "Logitech devices"
depends on HID
default !EXPERT
---help---
Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad.
config HID_MICROSOFT
- tristate "Microsoft non-fully HID-compliant devices" if EXPERT
+ tristate "Microsoft non-fully HID-compliant devices"
depends on HID
default !EXPERT
---help---
Support for Microsoft devices that are not fully compliant with HID standard.
config HID_MONTEREY
- tristate "Monterey Genius KB29E keyboard" if EXPERT
+ tristate "Monterey Genius KB29E keyboard"
depends on HID
default !EXPERT
---help---
config HID_PLANTRONICS
tristate "Plantronics USB HID Driver"
- default !EXPERT
depends on HID
---help---
Provides HID support for Plantronics telephony devices.
for events and handle data streams. Each sensor driver can format
data and present to user mode using input or IIO interface.
+ config HID_SENSOR_CUSTOM_SENSOR
+ tristate "HID Sensors hub custom sensor support"
+ depends on HID_SENSOR_HUB
+ default n
+ ---help---
+ HID Sensor hub specification allows definition of some custom and
+ generic sensors. Unlike other HID sensors, they can't be exported
+ via Linux IIO because of custom fields. This is up to the manufacturer
+ to decide how to interpret these special sensor ids and process in
+ the user space. Currently some manufacturers are using these ids for
+ sensor calibration and debugging other sensors. Manufacturers
+ should't use these special custom sensor ids to export any of the
+ standard sensors.
+ Select this config option for custom/generic sensor support.
+
endmenu
endif # HID
obj-$(CONFIG_HID_HOLTEK) += hid-holtek-kbd.o
obj-$(CONFIG_HID_HOLTEK) += hid-holtek-mouse.o
obj-$(CONFIG_HID_HOLTEK) += hid-holtekff.o
-obj-$(CONFIG_HID_HUION) += hid-huion.o
obj-$(CONFIG_HID_HYPERV_MOUSE) += hid-hyperv.o
obj-$(CONFIG_HID_ICADE) += hid-icade.o
obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o
obj-$(CONFIG_HID_WALTOP) += hid-waltop.o
obj-$(CONFIG_HID_WIIMOTE) += hid-wiimote.o
obj-$(CONFIG_HID_SENSOR_HUB) += hid-sensor-hub.o
+ obj-$(CONFIG_HID_SENSOR_CUSTOM_SENSOR) += hid-sensor-custom.o
obj-$(CONFIG_USB_HID) += usbhid/
obj-$(CONFIG_USB_MOUSE) += usbhid/
#define HID_SENSOR_HUB_ENUM_QUIRK 0x01
- /**
- * struct sensor_hub_pending - Synchronous read pending information
- * @status: Pending status true/false.
- * @ready: Completion synchronization data.
- * @usage_id: Usage id for physical device, E.g. Gyro usage id.
- * @attr_usage_id: Usage Id of a field, E.g. X-AXIS for a gyro.
- * @raw_size: Response size for a read request.
- * @raw_data: Place holder for received response.
- */
- struct sensor_hub_pending {
- bool status;
- struct completion ready;
- u32 usage_id;
- u32 attr_usage_id;
- int raw_size;
- u8 *raw_data;
- };
-
/**
* struct sensor_hub_data - Hold a instance data for a HID hub device
* @hsdev: Stored hid instance for current hub device.
* @mutex: Mutex to serialize synchronous request.
* @lock: Spin lock to protect pending request structure.
- * @pending: Holds information of pending sync read request.
* @dyn_callback_list: Holds callback function
* @dyn_callback_lock: spin lock to protect callback list
* @hid_sensor_hub_client_devs: Stores all MFD cells for a hub instance.
struct sensor_hub_data {
struct mutex mutex;
spinlock_t lock;
- struct sensor_hub_pending pending;
struct list_head dyn_callback_list;
spinlock_t dyn_callback_lock;
struct mfd_cell *hid_sensor_hub_client_devs;
for (i = 0; i < hdev->maxcollection; ++i) {
struct hid_collection *collection = &hdev->collection[i];
- if (collection->type == HID_COLLECTION_PHYSICAL)
+ if (collection->type == HID_COLLECTION_PHYSICAL ||
+ collection->type == HID_COLLECTION_APPLICATION)
++count;
}
{
struct hid_sensor_hub_callbacks_list *callback;
struct sensor_hub_data *pdata = hid_get_drvdata(hdev);
+ unsigned long flags;
- spin_lock(&pdata->dyn_callback_lock);
+ spin_lock_irqsave(&pdata->dyn_callback_lock, flags);
list_for_each_entry(callback, &pdata->dyn_callback_list, list)
- if (callback->usage_id == usage_id &&
+ if ((callback->usage_id == usage_id ||
+ callback->usage_id == HID_USAGE_SENSOR_COLLECTION) &&
(collection_index >=
callback->hsdev->start_collection_index) &&
(collection_index <
callback->hsdev->end_collection_index)) {
*priv = callback->priv;
*hsdev = callback->hsdev;
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock,
+ flags);
return callback->usage_callback;
}
- spin_unlock(&pdata->dyn_callback_lock);
+ spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return NULL;
}
callback->usage_callback = usage_callback;
callback->usage_id = usage_id;
callback->priv = NULL;
- list_add_tail(&callback->list, &pdata->dyn_callback_list);
+ /*
+ * If there is a handler registered for the collection type, then
+ * it will handle all reports for sensors in this collection. If
+ * there is also an individual sensor handler registration, then
+ * we want to make sure that the reports are directed to collection
+ * handler, as this may be a fusion sensor. So add collection handlers
+ * to the beginning of the list, so that they are matched first.
+ */
+ if (usage_id == HID_USAGE_SENSOR_COLLECTION)
+ list_add(&callback->list, &pdata->dyn_callback_list);
+ else
+ list_add_tail(&callback->list, &pdata->dyn_callback_list);
spin_unlock_irqrestore(&pdata->dyn_callback_lock, flags);
return 0;
EXPORT_SYMBOL_GPL(sensor_hub_remove_callback);
int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
- u32 field_index, s32 value)
+ u32 field_index, int buffer_size, void *buffer)
{
struct hid_report *report;
struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev);
+ __s32 *buf32 = buffer;
+ int i = 0;
+ int remaining_bytes;
+ __s32 value;
int ret = 0;
mutex_lock(&data->mutex);
ret = -EINVAL;
goto done_proc;
}
- hid_set_field(report->field[field_index], 0, value);
+
+ remaining_bytes = do_div(buffer_size, sizeof(__s32));
+ if (buffer_size) {
+ for (i = 0; i < buffer_size; ++i) {
+ hid_set_field(report->field[field_index], i,
+ (__force __s32)cpu_to_le32(*buf32));
+ ++buf32;
+ }
+ }
+ if (remaining_bytes) {
+ value = 0;
+ memcpy(&value, (u8 *)buf32, remaining_bytes);
+ hid_set_field(report->field[field_index], i,
+ (__force __s32)cpu_to_le32(value));
+ }
hid_hw_request(hsdev->hdev, report, HID_REQ_SET_REPORT);
hid_hw_wait(hsdev->hdev);
EXPORT_SYMBOL_GPL(sensor_hub_set_feature);
int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
- u32 field_index, s32 *value)
+ u32 field_index, int buffer_size, void *buffer)
{
struct hid_report *report;
struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev);
+ int report_size;
int ret = 0;
mutex_lock(&data->mutex);
}
hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT);
hid_hw_wait(hsdev->hdev);
- *value = report->field[field_index]->value[0];
+
+ /* calculate number of bytes required to read this field */
+ report_size = DIV_ROUND_UP(report->field[field_index]->report_size,
+ 8) *
+ report->field[field_index]->report_count;
+ if (!report_size) {
+ ret = -EINVAL;
+ goto done_proc;
+ }
+ ret = min(report_size, buffer_size);
+ memcpy(buffer, report->field[field_index]->value, ret);
done_proc:
mutex_unlock(&data->mutex);
int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,
u32 usage_id,
- u32 attr_usage_id, u32 report_id)
+ u32 attr_usage_id, u32 report_id,
+ enum sensor_hub_read_flags flag)
{
struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev);
unsigned long flags;
struct hid_report *report;
int ret_val = 0;
- mutex_lock(&data->mutex);
- memset(&data->pending, 0, sizeof(data->pending));
- init_completion(&data->pending.ready);
- data->pending.usage_id = usage_id;
- data->pending.attr_usage_id = attr_usage_id;
- data->pending.raw_size = 0;
-
- spin_lock_irqsave(&data->lock, flags);
- data->pending.status = true;
- spin_unlock_irqrestore(&data->lock, flags);
- report = sensor_hub_report(report_id, hsdev->hdev, HID_INPUT_REPORT);
+ report = sensor_hub_report(report_id, hsdev->hdev,
+ HID_INPUT_REPORT);
if (!report)
- goto err_free;
-
- hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT);
- wait_for_completion_interruptible_timeout(&data->pending.ready, HZ*5);
- switch (data->pending.raw_size) {
- case 1:
- ret_val = *(u8 *)data->pending.raw_data;
- break;
- case 2:
- ret_val = *(u16 *)data->pending.raw_data;
- break;
- case 4:
- ret_val = *(u32 *)data->pending.raw_data;
- break;
- default:
- ret_val = 0;
+ return -EINVAL;
+
+ mutex_lock(&hsdev->mutex);
+ if (flag == SENSOR_HUB_SYNC) {
+ memset(&hsdev->pending, 0, sizeof(hsdev->pending));
+ init_completion(&hsdev->pending.ready);
+ hsdev->pending.usage_id = usage_id;
+ hsdev->pending.attr_usage_id = attr_usage_id;
+ hsdev->pending.raw_size = 0;
+
+ spin_lock_irqsave(&data->lock, flags);
+ hsdev->pending.status = true;
+ spin_unlock_irqrestore(&data->lock, flags);
}
- kfree(data->pending.raw_data);
-
- err_free:
- data->pending.status = false;
+ mutex_lock(&data->mutex);
+ hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT);
mutex_unlock(&data->mutex);
+ if (flag == SENSOR_HUB_SYNC) {
+ wait_for_completion_interruptible_timeout(
+ &hsdev->pending.ready, HZ*5);
+ switch (hsdev->pending.raw_size) {
+ case 1:
+ ret_val = *(u8 *)hsdev->pending.raw_data;
+ break;
+ case 2:
+ ret_val = *(u16 *)hsdev->pending.raw_data;
+ break;
+ case 4:
+ ret_val = *(u32 *)hsdev->pending.raw_data;
+ break;
+ default:
+ ret_val = 0;
+ }
+ kfree(hsdev->pending.raw_data);
+ hsdev->pending.status = false;
+ }
+ mutex_unlock(&hsdev->mutex);
return ret_val;
}
report->field[i]->report_count)/8);
sz = (report->field[i]->report_size *
report->field[i]->report_count)/8;
- if (pdata->pending.status && pdata->pending.attr_usage_id ==
- report->field[i]->usage->hid) {
- hid_dbg(hdev, "data was pending ...\n");
- pdata->pending.raw_data = kmemdup(ptr, sz, GFP_ATOMIC);
- if (pdata->pending.raw_data)
- pdata->pending.raw_size = sz;
- else
- pdata->pending.raw_size = 0;
- complete(&pdata->pending.ready);
- }
collection = &hdev->collection[
report->field[i]->usage->collection_index];
hid_dbg(hdev, "collection->usage %x\n",
report->field[i]->physical,
report->field[i]->usage[0].collection_index,
&hsdev, &priv);
-
- if (callback && callback->capture_sample) {
+ if (!callback) {
+ ptr += sz;
+ continue;
+ }
+ if (hsdev->pending.status && (hsdev->pending.attr_usage_id ==
+ report->field[i]->usage->hid ||
+ hsdev->pending.attr_usage_id ==
+ report->field[i]->logical)) {
+ hid_dbg(hdev, "data was pending ...\n");
+ hsdev->pending.raw_data = kmemdup(ptr, sz, GFP_ATOMIC);
+ if (hsdev->pending.raw_data)
+ hsdev->pending.raw_size = sz;
+ else
+ hsdev->pending.raw_size = 0;
+ complete(&hsdev->pending.ready);
+ }
+ if (callback->capture_sample) {
if (report->field[i]->logical)
callback->capture_sample(hsdev,
report->field[i]->logical, sz, ptr,
int dev_cnt;
struct hid_sensor_hub_device *hsdev;
struct hid_sensor_hub_device *last_hsdev = NULL;
+ struct hid_sensor_hub_device *collection_hsdev = NULL;
sd = devm_kzalloc(&hdev->dev, sizeof(*sd), GFP_KERNEL);
if (!sd) {
for (i = 0; i < hdev->maxcollection; ++i) {
struct hid_collection *collection = &hdev->collection[i];
- if (collection->type == HID_COLLECTION_PHYSICAL) {
+ if (collection->type == HID_COLLECTION_PHYSICAL ||
+ collection->type == HID_COLLECTION_APPLICATION) {
hsdev = devm_kzalloc(&hdev->dev, sizeof(*hsdev),
GFP_KERNEL);
hsdev->hdev = hdev;
hsdev->vendor_id = hdev->vendor;
hsdev->product_id = hdev->product;
+ hsdev->usage = collection->usage;
+ mutex_init(&hsdev->mutex);
hsdev->start_collection_index = i;
if (last_hsdev)
last_hsdev->end_collection_index = i;
hid_dbg(hdev, "Adding %s:%d\n", name,
hsdev->start_collection_index);
sd->hid_sensor_client_cnt++;
+ if (collection_hsdev)
+ collection_hsdev->end_collection_index = i;
+ if (collection->type == HID_COLLECTION_APPLICATION &&
+ collection->usage == HID_USAGE_SENSOR_COLLECTION)
+ collection_hsdev = hsdev;
}
}
if (last_hsdev)
last_hsdev->end_collection_index = i;
+ if (collection_hsdev)
+ collection_hsdev->end_collection_index = i;
ret = mfd_add_hotplug_devices(&hdev->dev,
sd->hid_sensor_hub_client_devs,
{
struct sensor_hub_data *data = hid_get_drvdata(hdev);
unsigned long flags;
+ int i;
hid_dbg(hdev, " hardware removed\n");
hid_hw_close(hdev);
hid_hw_stop(hdev);
spin_lock_irqsave(&data->lock, flags);
- if (data->pending.status)
- complete(&data->pending.ready);
+ for (i = 0; i < data->hid_sensor_client_cnt; ++i) {
+ struct hid_sensor_hub_device *hsdev =
+ data->hid_sensor_hub_client_devs[i].platform_data;
+ if (hsdev->pending.status)
+ complete(&hsdev->pending.ready);
+ }
spin_unlock_irqrestore(&data->lock, flags);
mfd_remove_devices(&hdev->dev);
hid_set_drvdata(hdev, NULL);
int report_id = -1;
u32 address;
int ret_type;
- s32 poll_value;
*val = 0;
*val2 = 0;
switch (mask) {
case 0:
- poll_value = hid_sensor_read_poll_value(
- &accel_state->common_attributes);
- if (poll_value < 0)
- return -EINVAL;
-
hid_sensor_power_state(&accel_state->common_attributes, true);
- msleep_interruptible(poll_value * 2);
report_id = accel_state->accel[chan->scan_index].report_id;
address = accel_3d_addresses[chan->scan_index];
if (report_id >= 0)
*val = sensor_hub_input_attr_get_raw_value(
accel_state->common_attributes.hsdev,
HID_USAGE_SENSOR_ACCEL_3D, address,
- report_id);
+ report_id,
+ SENSOR_HUB_SYNC);
else {
*val = 0;
hid_sensor_power_state(&accel_state->common_attributes,
.id_table = hid_accel_3d_ids,
.driver = {
.name = KBUILD_MODNAME,
+ .pm = &hid_sensor_pm_ops,
},
.probe = hid_accel_3d_probe,
.remove = hid_accel_3d_remove,
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
+#include <linux/delay.h>
#include <linux/hid-sensor-hub.h>
#include <linux/iio/iio.h>
#include <linux/iio/trigger.h>
#include <linux/iio/sysfs.h>
#include "hid-sensor-trigger.h"
-int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
+static int _hid_sensor_power_state(struct hid_sensor_common *st, bool state)
{
int state_val;
int report_val;
+ s32 poll_value = 0;
if (state) {
if (sensor_hub_device_open(st->hsdev))
st->report_state.report_id,
st->report_state.index,
HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM);
+
+ poll_value = hid_sensor_read_poll_value(st);
} else {
if (!atomic_dec_and_test(&st->data_ready))
return 0;
if (state_val >= 0) {
state_val += st->power_state.logical_minimum;
sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
- st->power_state.index,
- (s32)state_val);
+ st->power_state.index, sizeof(state_val),
+ &state_val);
}
if (report_val >= 0) {
report_val += st->report_state.logical_minimum;
sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
- st->report_state.index,
- (s32)report_val);
+ st->report_state.index,
+ sizeof(report_val),
+ &report_val);
}
sensor_hub_get_feature(st->hsdev, st->power_state.report_id,
- st->power_state.index,
- &state_val);
+ st->power_state.index,
+ sizeof(state_val), &state_val);
+ if (state && poll_value)
+ msleep_interruptible(poll_value * 2);
+
return 0;
}
EXPORT_SYMBOL(hid_sensor_power_state);
+int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
+{
+#ifdef CONFIG_PM
+ int ret;
+
+ if (state)
+ ret = pm_runtime_get_sync(&st->pdev->dev);
+ else {
+ pm_runtime_mark_last_busy(&st->pdev->dev);
+ ret = pm_runtime_put_autosuspend(&st->pdev->dev);
+ }
+ if (ret < 0) {
+ if (state)
+ pm_runtime_put_noidle(&st->pdev->dev);
+ return ret;
+ }
+
+ return 0;
+#else
+ return _hid_sensor_power_state(st, state);
+#endif
+}
+
static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
bool state)
{
attrb->trigger = trig;
indio_dev->trig = iio_trigger_get(trig);
- return ret;
+ ret = pm_runtime_set_active(&indio_dev->dev);
+ if (ret)
+ goto error_unreg_trigger;
+ iio_device_set_drvdata(indio_dev, attrb);
+ pm_suspend_ignore_children(&attrb->pdev->dev, true);
+ pm_runtime_enable(&attrb->pdev->dev);
+ /* Default to 3 seconds, but can be changed from sysfs */
+ pm_runtime_set_autosuspend_delay(&attrb->pdev->dev,
+ 3000);
+ pm_runtime_use_autosuspend(&attrb->pdev->dev);
+
+ return ret;
+error_unreg_trigger:
+ iio_trigger_unregister(trig);
error_free_trig:
iio_trigger_free(trig);
error_ret:
}
EXPORT_SYMBOL(hid_sensor_setup_trigger);
+#ifdef CONFIG_PM
+static int hid_sensor_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
+
+ return _hid_sensor_power_state(attrb, false);
+}
+
+static int hid_sensor_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
+
+ return _hid_sensor_power_state(attrb, true);
+}
+
+#endif
+
+const struct dev_pm_ops hid_sensor_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(hid_sensor_suspend, hid_sensor_resume)
+ SET_RUNTIME_PM_OPS(hid_sensor_suspend,
+ hid_sensor_resume, NULL)
+};
+EXPORT_SYMBOL(hid_sensor_pm_ops);
+
MODULE_DESCRIPTION("HID Sensor trigger processing");
MODULE_LICENSE("GPL");
int report_id = -1;
u32 address;
int ret_type;
- s32 poll_value;
*val = 0;
*val2 = 0;
switch (mask) {
case 0:
- poll_value = hid_sensor_read_poll_value(
- &gyro_state->common_attributes);
- if (poll_value < 0)
- return -EINVAL;
-
hid_sensor_power_state(&gyro_state->common_attributes, true);
- msleep_interruptible(poll_value * 2);
report_id = gyro_state->gyro[chan->scan_index].report_id;
address = gyro_3d_addresses[chan->scan_index];
if (report_id >= 0)
*val = sensor_hub_input_attr_get_raw_value(
gyro_state->common_attributes.hsdev,
HID_USAGE_SENSOR_GYRO_3D, address,
- report_id);
+ report_id,
+ SENSOR_HUB_SYNC);
else {
*val = 0;
hid_sensor_power_state(&gyro_state->common_attributes,
.id_table = hid_gyro_3d_ids,
.driver = {
.name = KBUILD_MODNAME,
+ .pm = &hid_sensor_pm_ops,
},
.probe = hid_gyro_3d_probe,
.remove = hid_gyro_3d_remove,
int report_id = -1;
u32 address;
int ret_type;
- s32 poll_value;
*val = 0;
*val2 = 0;
break;
}
if (report_id >= 0) {
- poll_value = hid_sensor_read_poll_value(
- &als_state->common_attributes);
- if (poll_value < 0)
- return -EINVAL;
-
hid_sensor_power_state(&als_state->common_attributes,
true);
- msleep_interruptible(poll_value * 2);
-
*val = sensor_hub_input_attr_get_raw_value(
als_state->common_attributes.hsdev,
HID_USAGE_SENSOR_ALS, address,
- report_id);
+ report_id,
+ SENSOR_HUB_SYNC);
hid_sensor_power_state(&als_state->common_attributes,
false);
} else {
.id_table = hid_als_ids,
.driver = {
.name = KBUILD_MODNAME,
+ .pm = &hid_sensor_pm_ops,
},
.probe = hid_als_probe,
.remove = hid_als_remove,
int report_id = -1;
u32 address;
int ret_type;
- s32 poll_value;
*val = 0;
*val2 = 0;
break;
}
if (report_id >= 0) {
- poll_value = hid_sensor_read_poll_value(
- &prox_state->common_attributes);
- if (poll_value < 0)
- return -EINVAL;
-
hid_sensor_power_state(&prox_state->common_attributes,
true);
-
- msleep_interruptible(poll_value * 2);
-
*val = sensor_hub_input_attr_get_raw_value(
prox_state->common_attributes.hsdev,
HID_USAGE_SENSOR_PROX, address,
- report_id);
+ report_id,
+ SENSOR_HUB_SYNC);
hid_sensor_power_state(&prox_state->common_attributes,
false);
} else {
.id_table = hid_prox_ids,
.driver = {
.name = KBUILD_MODNAME,
+ .pm = &hid_sensor_pm_ops,
},
.probe = hid_prox_probe,
.remove = hid_prox_remove,
int report_id = -1;
u32 address;
int ret_type;
- s32 poll_value;
*val = 0;
*val2 = 0;
switch (mask) {
case 0:
- poll_value = hid_sensor_read_poll_value(
- &magn_state->common_attributes);
- if (poll_value < 0)
- return -EINVAL;
-
hid_sensor_power_state(&magn_state->common_attributes, true);
- msleep_interruptible(poll_value * 2);
-
report_id =
magn_state->magn[chan->address].report_id;
address = magn_3d_addresses[chan->address];
*val = sensor_hub_input_attr_get_raw_value(
magn_state->common_attributes.hsdev,
HID_USAGE_SENSOR_COMPASS_3D, address,
- report_id);
+ report_id,
+ SENSOR_HUB_SYNC);
else {
*val = 0;
hid_sensor_power_state(&magn_state->common_attributes,
.id_table = hid_magn_3d_ids,
.driver = {
.name = KBUILD_MODNAME,
+ .pm = &hid_sensor_pm_ops,
},
.probe = hid_magn_3d_probe,
.remove = hid_magn_3d_remove,
int report_id = -1;
u32 address;
int ret_type;
- s32 poll_value;
*val = 0;
*val2 = 0;
switch (mask) {
case IIO_CHAN_INFO_RAW:
- poll_value = hid_sensor_read_poll_value(
- &incl_state->common_attributes);
- if (poll_value < 0)
- return -EINVAL;
-
hid_sensor_power_state(&incl_state->common_attributes, true);
- msleep_interruptible(poll_value * 2);
-
report_id =
incl_state->incl[chan->scan_index].report_id;
address = incl_3d_addresses[chan->scan_index];
*val = sensor_hub_input_attr_get_raw_value(
incl_state->common_attributes.hsdev,
HID_USAGE_SENSOR_INCLINOMETER_3D, address,
- report_id);
+ report_id,
+ SENSOR_HUB_SYNC);
else {
hid_sensor_power_state(&incl_state->common_attributes,
false);
.id_table = hid_incl_3d_ids,
.driver = {
.name = KBUILD_MODNAME,
+ .pm = &hid_sensor_pm_ops,
},
.probe = hid_incl_3d_probe,
.remove = hid_incl_3d_remove,
int report_id = -1;
u32 address;
int ret_type;
- s32 poll_value;
*val = 0;
*val2 = 0;
break;
}
if (report_id >= 0) {
- poll_value = hid_sensor_read_poll_value(
- &press_state->common_attributes);
- if (poll_value < 0)
- return -EINVAL;
hid_sensor_power_state(&press_state->common_attributes,
true);
-
- msleep_interruptible(poll_value * 2);
-
*val = sensor_hub_input_attr_get_raw_value(
press_state->common_attributes.hsdev,
HID_USAGE_SENSOR_PRESSURE, address,
- report_id);
+ report_id,
+ SENSOR_HUB_SYNC);
hid_sensor_power_state(&press_state->common_attributes,
false);
} else {
.id_table = hid_press_ids,
.driver = {
.name = KBUILD_MODNAME,
+ .pm = &hid_sensor_pm_ops,
},
.probe = hid_press_probe,
.remove = hid_press_remove,
* @units: Measurment unit for this attribute.
* @unit_expo: Exponent used in the data.
* @size: Size in bytes for data size.
+ * @logical_minimum: Logical minimum value for this attribute.
+ * @logical_maximum: Logical maximum value for this attribute.
*/
struct hid_sensor_hub_attribute_info {
u32 usage_id;
s32 logical_maximum;
};
+ /**
+ * struct sensor_hub_pending - Synchronous read pending information
+ * @status: Pending status true/false.
+ * @ready: Completion synchronization data.
+ * @usage_id: Usage id for physical device, E.g. Gyro usage id.
+ * @attr_usage_id: Usage Id of a field, E.g. X-AXIS for a gyro.
+ * @raw_size: Response size for a read request.
+ * @raw_data: Place holder for received response.
+ */
+ struct sensor_hub_pending {
+ bool status;
+ struct completion ready;
+ u32 usage_id;
+ u32 attr_usage_id;
+ int raw_size;
+ u8 *raw_data;
+ };
+
/**
* struct hid_sensor_hub_device - Stores the hub instance data
* @hdev: Stores the hid instance.
* @vendor_id: Vendor id of hub device.
* @product_id: Product id of hub device.
+ * @usage: Usage id for this hub device instance.
* @start_collection_index: Starting index for a phy type collection
* @end_collection_index: Last index for a phy type collection
+ * @mutex: synchronizing mutex.
+ * @pending: Holds information of pending sync read request.
*/
struct hid_sensor_hub_device {
struct hid_device *hdev;
u32 vendor_id;
u32 product_id;
+ u32 usage;
int start_collection_index;
int end_collection_index;
+ struct mutex mutex;
+ struct sensor_hub_pending pending;
};
/**
struct hid_sensor_hub_attribute_info *info);
/**
-* sensor_hub_input_attr_get_raw_value() - Attribute read request
+* sensor_hub_input_attr_get_raw_value() - Synchronous read request
+* @hsdev: Hub device instance.
* @usage_id: Attribute usage id of parent physical device as per spec
* @attr_usage_id: Attribute usage id as per spec
* @report_id: Report id to look for
+ * @flag: Synchronous or asynchronous read
*
- * Issues a synchronous read request for an input attribute. Returns
- * data upto 32 bits. Since client can get events, so this call should
- * not be used for data paths, this will impact performance.
+ * Issues a synchronous or asynchronous read request for an input attribute.
+ * Returns data upto 32 bits.
*/
+ enum sensor_hub_read_flags {
+ SENSOR_HUB_SYNC,
+ SENSOR_HUB_ASYNC,
+ };
+
int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,
- u32 usage_id,
- u32 attr_usage_id, u32 report_id);
+ u32 usage_id,
+ u32 attr_usage_id, u32 report_id,
+ enum sensor_hub_read_flags flag
+ );
+
/**
* sensor_hub_set_feature() - Feature set request
+* @hsdev: Hub device instance.
* @report_id: Report id to look for
* @field_index: Field index inside a report
- * @value: Value to set
+ * @buffer_size: size of the buffer
+ * @buffer: buffer to use in the feature set
*
* Used to set a field in feature report. For example this can set polling
* interval, sensitivity, activate/deactivate state.
*/
int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
- u32 field_index, s32 value);
+ u32 field_index, int buffer_size, void *buffer);
/**
* sensor_hub_get_feature() - Feature get request
+* @hsdev: Hub device instance.
* @report_id: Report id to look for
* @field_index: Field index inside a report
- * @value: Place holder for return value
+ * @buffer_size: size of the buffer
+ * @buffer: buffer to copy output
*
* Used to get a field in feature report. For example this can get polling
- * interval, sensitivity, activate/deactivate state.
+ * interval, sensitivity, activate/deactivate state. On success it returns
+ * number of bytes copied to buffer. On failure, it returns value < 0.
*/
int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
- u32 field_index, s32 *value);
+ u32 field_index, int buffer_size, void *buffer);
/* hid-sensor-attributes */
projects / linux.git / commitdiff