spi: uniphier: re-add addressing properties

In commit 7662d1dc17d4 ("spi: uniphier: fix incorrect property items")
addressing properties of #address-cells and #size-cells were removed.
Since it is not necessary to remove them, they are back again.

Signed-off-by: Keiji Hayashibara <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Mark Brown <[email protected]>

diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
index b04e66a52de5dfc4ca66a3efc5339e4986275033..e1201573a29a7dc96a85ae2735bd10ed2d069e45 100644 (file)
--- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@@ -5,6 +5,8 @@ UniPhier SoCs have SCSSI which supports SPI single channel.
 Required properties:
  - compatible: should be "socionext,uniphier-scssi"
  - reg: address and length of the spi master registers
 Required properties:
  - compatible: should be "socionext,uniphier-scssi"
  - reg: address and length of the spi master registers

+ - #address-cells: must be <1>, see spi-bus.txt
+ - #size-cells: must be <0>, see spi-bus.txt

  - interrupts: a single interrupt specifier
  - pinctrl-names: should be "default"
  - pinctrl-0: pin control state for the default mode
  - interrupts: a single interrupt specifier
  - pinctrl-names: should be "default"
  - pinctrl-0: pin control state for the default mode


@@ -16,6 +18,8 @@ Example:
 spi0: spi@54006000 {
        compatible = "socionext,uniphier-scssi";
        reg = <0x54006000 0x100>;
 spi0: spi@54006000 {
        compatible = "socionext,uniphier-scssi";
        reg = <0x54006000 0x100>;

+       #address-cells = <1>;
+       #size-cells = <0>;

        interrupts = <0 39 4>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_spi0>;
        interrupts = <0 39 4>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_spi0>;