spi/panel: dt-bindings: drop CPHA and CPOL from common properties

The spi-cpha and spi-cpol properties are device specific and should be
accepted only if device really needs them.  Drop them from common
spi-peripheral-props.yaml schema, mention in few panel drivers which use
them and include instead in the SPI controller bindings.  The controller
bindings will provide CPHA/CPOL type validation and one place for
description.  Each device schema must list the properties if they are
applicable.

Suggested-by: Jonathan Cameron <[email protected]>
Suggested-by: Rob Herring <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
index 5e4e0e552c2f893af73df20590560123573cd24e..628c4b8981114fbc4372d484a6bf32e9820a561a 100644 (file)
--- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
+++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
@@ -21,6 +21,9 @@ properties:
   enable-gpios: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - enable-gpios

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
index d525165d6d6314a15b2b5a08c564ecd95224a1eb..c0fabeb3862886c2c0ee362500a7d44cc8cdc2e2 100644 (file)
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
@@ -42,6 +42,9 @@ properties:
   panel-height-mm:
     description: physical panel height [mm]
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - reg

diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
index 9e1d707c2ace18da7d26ae834740e56703405f49..d984b59daa4ad12f08403d2e7587b785d22878d4 100644 (file)
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
@@ -23,6 +23,9 @@ properties:
   backlight: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - reg

diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
index f902a9d741414baf52a1cfdaec0b46475242451a..e8c8ee8d7c8830ca920bd2069c3d40c5e4399c19 100644 (file)
--- a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
@@ -28,6 +28,9 @@ properties:
   backlight: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - port

diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 678cee68b52a2734262afdd9c507871da3b484a7..655713fba7e252354eb6c1b67f9018b916d439c6 100644 (file)
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -95,6 +95,17 @@ patternProperties:
     type: object
     $ref: spi-peripheral-props.yaml
 
+    properties:
+      spi-cpha:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The device requires shifted clock phase (CPHA) mode.
+
+      spi-cpol:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          The device requires inverse clock polarity (CPOL) mode.
+
     required:
       - compatible
       - reg

diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index 9d63a58b46a088c79877320be6db580db642254c..ce048e782e80422d2a5474b2c94262ac55e6abc1 100644 (file)
--- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -34,16 +34,6 @@ properties:
     description:
       The device requires 3-wire mode.
 
-  spi-cpha:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description:
-      The device requires shifted clock phase (CPHA) mode.
-
-  spi-cpol:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description:
-      The device requires inverse clock polarity (CPOL) mode.
-
   spi-cs-high:
     $ref: /schemas/types.yaml#/definitions/flag
     description: