#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/clk-provider.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include "at91_aic.h"
#include "generic.h"
-
- static const struct of_device_id irq_of_match[] __initconst = {
- { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
- { /*sentinel*/ }
- };
-
- static void __init at91rm9200_dt_init_irq(void)
- {
- of_irq_init(irq_of_match);
- }
-
+static void __init at91rm9200_dt_timer_init(void)
+{
+#if defined(CONFIG_COMMON_CLK)
+ of_clk_init(NULL);
+#endif
+ at91rm9200_timer_init();
+}
+
static const char *at91rm9200_dt_board_compat[] __initdata = {
"atmel,at91rm9200",
NULL
};
DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
- .init_time = at91rm9200_timer_init,
+ .init_time = at91rm9200_dt_timer_init,
.map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
.init_early = at91rm9200_dt_initialize,
- .init_irq = at91rm9200_dt_init_irq,
.dt_compat = at91rm9200_dt_board_compat,
MACHINE_END
oh->_clk = clk_get(NULL, oh->main_clk);
if (IS_ERR(oh->_clk)) {
- pr_warning("omap_hwmod: %s: cannot clk_get main_clk %s\n",
- oh->name, oh->main_clk);
+ pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n",
+ oh->name, oh->main_clk);
return -EINVAL;
}
/*
c = clk_get(NULL, os->clk);
if (IS_ERR(c)) {
- pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
- oh->name, os->clk);
+ pr_warn("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
+ oh->name, os->clk);
ret = -EINVAL;
continue;
}
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
c = clk_get(NULL, oc->clk);
if (IS_ERR(c)) {
- pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
- oh->name, oc->clk);
+ pr_warn("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
+ oh->name, oc->clk);
ret = -EINVAL;
continue;
}
oh->clkdm = clkdm_lookup(oh->clkdm_name);
if (!oh->clkdm) {
- pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n",
+ pr_warn("omap_hwmod: %s: could not associate to clkdm %s\n",
oh->name, oh->clkdm_name);
return 0;
}
if (!ret)
oh->_state = _HWMOD_STATE_CLKS_INITED;
else
- pr_warning("omap_hwmod: %s: cannot _init_clocks\n", oh->name);
+ pr_warn("omap_hwmod: %s: cannot _init_clocks\n", oh->name);
return ret;
}
_disable_clocks(oh);
if (ret == -EBUSY)
- pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
+ pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);
if (!ret) {
/*
c = _wait_softreset_complete(oh);
if (c == MAX_MODULE_SOFTRESET_WAIT) {
- pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
- oh->name, MAX_MODULE_SOFTRESET_WAIT);
+ pr_warn("omap_hwmod: %s: softreset failed (waited %d usec)\n",
+ oh->name, MAX_MODULE_SOFTRESET_WAIT);
ret = -ETIMEDOUT;
goto dis_opt_clks;
} else {
spin_lock_irqsave(&io_chain_lock, flags);
- if (cpu_is_omap34xx() && omap3_has_io_chain_ctrl())
+ if (cpu_is_omap34xx())
omap3xxx_prm_reconfigure_io_chain();
else if (cpu_is_omap44xx())
omap44xx_prm_reconfigure_io_chain();
if (oh->rst_lines_cnt == 0) {
r = _enable(oh);
if (r) {
- pr_warning("omap_hwmod: %s: cannot be enabled for reset (%d)\n",
- oh->name, oh->_state);
+ pr_warn("omap_hwmod: %s: cannot be enabled for reset (%d)\n",
+ oh->name, oh->_state);
return -EINVAL;
}
}
/* set IBE to 1 */
rx51_secure_update_aux_cr(BIT(6), 0);
} else {
- pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n");
- pr_warning("Thumb binaries may crash randomly without this workaround\n");
+ pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n");
+ pr_warn("Thumb binaries may crash randomly without this workaround\n");
}
pr_info("RX-51: Registring OMAP3 HWRNG device\n");
}
}
-void __init pdata_quirks_init(struct of_device_id *omap_dt_match_table)
+void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
{
omap_sdrc_init(NULL, NULL);
pdata_quirks_check(auxdata_quirks);