scsi: aacraid: Fix performance issue on logical drives

Fix performance issue where the queue depth for SmartIOC logical volumes is
set to 1, and allow the usual logical volume code to be executed

Fixes: a052865fe287 (aacraid: Set correct Queue Depth for HBA1000 RAW disks)
Cc: [email protected]
Signed-off-by: Sagar Biradar <[email protected]>
Reviewed-by: Dave Carroll <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 22ecacffeca6a1316f6c94c73232075d77ccff34..598d6efae53eac102a269f8eb18c0b00cfc146c0 100644 (file)
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -413,13 +413,16 @@ static int aac_slave_configure(struct scsi_device *sdev)
        if (chn < AAC_MAX_BUSES && tid < AAC_MAX_TARGETS && aac->sa_firmware) {
                devtype = aac->hba_map[chn][tid].devtype;
 
-               if (devtype == AAC_DEVTYPE_NATIVE_RAW)
+               if (devtype == AAC_DEVTYPE_NATIVE_RAW) {
                        depth = aac->hba_map[chn][tid].qd_limit;
-               else if (devtype == AAC_DEVTYPE_ARC_RAW)
+                       set_timeout = 1;
+                       goto common_config;
+               }
+               if (devtype == AAC_DEVTYPE_ARC_RAW) {
                        set_qd_dev_type = true;
-
-               set_timeout = 1;
-               goto common_config;
+                       set_timeout = 1;
+                       goto common_config;
+               }
        }
 
        if (aac->jbod && (sdev->type == TYPE_DISK))