drivers/nfc/pn544/i2c.c

   1 /*
   2  * I2C Link Layer for PN544 HCI based Driver
   3  *
   4  * Copyright (C) 2012  Intel Corporation. All rights reserved.
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms and conditions of the GNU General Public License,
   8  * version 2, as published by the Free Software Foundation.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, see <http://www.gnu.org/licenses/>.
  17  */
  18
  19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  20
  21 #include <linux/crc-ccitt.h>
  22 #include <linux/module.h>
  23 #include <linux/i2c.h>
  24 #include <linux/gpio.h>
  25 #include <linux/of_gpio.h>
  26 #include <linux/of_irq.h>
  27 #include <linux/acpi.h>
  28 #include <linux/miscdevice.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/delay.h>
  31 #include <linux/nfc.h>
  32 #include <linux/firmware.h>
  33 #include <linux/gpio/consumer.h>
  34 #include <linux/platform_data/pn544.h>
  35 #include <asm/unaligned.h>
  36
  37 #include <net/nfc/hci.h>
  38 #include <net/nfc/llc.h>
  39 #include <net/nfc/nfc.h>
  40
  41 #include "pn544.h"
  42
  43 #define PN544_I2C_FRAME_HEADROOM 1
  44 #define PN544_I2C_FRAME_TAILROOM 2
  45
  46 /* GPIO names */
  47 #define PN544_GPIO_NAME_IRQ "pn544_irq"
  48 #define PN544_GPIO_NAME_FW  "pn544_fw"
  49 #define PN544_GPIO_NAME_EN  "pn544_en"
  50
  51 /* framing in HCI mode */
  52 #define PN544_HCI_I2C_LLC_LEN           1
  53 #define PN544_HCI_I2C_LLC_CRC           2
  54 #define PN544_HCI_I2C_LLC_LEN_CRC       (PN544_HCI_I2C_LLC_LEN + \
  55                                          PN544_HCI_I2C_LLC_CRC)
  56 #define PN544_HCI_I2C_LLC_MIN_SIZE      (1 + PN544_HCI_I2C_LLC_LEN_CRC)
  57 #define PN544_HCI_I2C_LLC_MAX_PAYLOAD   29
  58 #define PN544_HCI_I2C_LLC_MAX_SIZE      (PN544_HCI_I2C_LLC_LEN_CRC + 1 + \
  59                                          PN544_HCI_I2C_LLC_MAX_PAYLOAD)
  60
  61 static struct i2c_device_id pn544_hci_i2c_id_table[] = {
  62         {"pn544", 0},
  63         {}
  64 };
  65
  66 MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table);
  67
  68 static const struct acpi_device_id pn544_hci_i2c_acpi_match[] = {
  69         {"NXP5440", 0},
  70         {}
  71 };
  72
  73 MODULE_DEVICE_TABLE(acpi, pn544_hci_i2c_acpi_match);
  74
  75 #define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c"
  76
  77 /*
  78  * Exposed through the 4 most significant bytes
  79  * from the HCI SW_VERSION first byte, a.k.a.
  80  * SW RomLib.
  81  */
  82 #define PN544_HW_VARIANT_C2 0xa
  83 #define PN544_HW_VARIANT_C3 0xb
  84
  85 #define PN544_FW_CMD_RESET 0x01
  86 #define PN544_FW_CMD_WRITE 0x08
  87 #define PN544_FW_CMD_CHECK 0x06
  88 #define PN544_FW_CMD_SECURE_WRITE 0x0C
  89 #define PN544_FW_CMD_SECURE_CHUNK_WRITE 0x0D
  90
  91 struct pn544_i2c_fw_frame_write {
  92         u8 cmd;
  93         u16 be_length;
  94         u8 be_dest_addr[3];
  95         u16 be_datalen;
  96         u8 data[];
  97 } __packed;
  98
  99 struct pn544_i2c_fw_frame_check {
 100         u8 cmd;
 101         u16 be_length;
 102         u8 be_start_addr[3];
 103         u16 be_datalen;
 104         u16 be_crc;
 105 } __packed;
 106
 107 struct pn544_i2c_fw_frame_response {
 108         u8 status;
 109         u16 be_length;
 110 } __packed;
 111
 112 struct pn544_i2c_fw_blob {
 113         u32 be_size;
 114         u32 be_destaddr;
 115         u8 data[];
 116 };
 117
 118 struct pn544_i2c_fw_secure_frame {
 119         u8 cmd;
 120         u16 be_datalen;
 121         u8 data[];
 122 } __packed;
 123
 124 struct pn544_i2c_fw_secure_blob {
 125         u64 header;
 126         u8 data[];
 127 };
 128
 129 #define PN544_FW_CMD_RESULT_TIMEOUT 0x01
 130 #define PN544_FW_CMD_RESULT_BAD_CRC 0x02
 131 #define PN544_FW_CMD_RESULT_ACCESS_DENIED 0x08
 132 #define PN544_FW_CMD_RESULT_PROTOCOL_ERROR 0x0B
 133 #define PN544_FW_CMD_RESULT_INVALID_PARAMETER 0x11
 134 #define PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND 0x13
 135 #define PN544_FW_CMD_RESULT_INVALID_LENGTH 0x18
 136 #define PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR 0x19
 137 #define PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR 0x1D
 138 #define PN544_FW_CMD_RESULT_MEMORY_ERROR 0x20
 139 #define PN544_FW_CMD_RESULT_CHUNK_OK 0x21
 140 #define PN544_FW_CMD_RESULT_WRITE_FAILED 0x74
 141 #define PN544_FW_CMD_RESULT_COMMAND_REJECTED 0xE0
 142 #define PN544_FW_CMD_RESULT_CHUNK_ERROR 0xE6
 143
 144 #define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
 145
 146 #define PN544_FW_WRITE_BUFFER_MAX_LEN 0x9f7
 147 #define PN544_FW_I2C_MAX_PAYLOAD PN544_HCI_I2C_LLC_MAX_SIZE
 148 #define PN544_FW_I2C_WRITE_FRAME_HEADER_LEN 8
 149 #define PN544_FW_I2C_WRITE_DATA_MAX_LEN MIN((PN544_FW_I2C_MAX_PAYLOAD -\
 150                                          PN544_FW_I2C_WRITE_FRAME_HEADER_LEN),\
 151                                          PN544_FW_WRITE_BUFFER_MAX_LEN)
 152 #define PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN 3
 153 #define PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN (PN544_FW_I2C_MAX_PAYLOAD -\
 154                         PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN)
 155 #define PN544_FW_SECURE_FRAME_HEADER_LEN 3
 156 #define PN544_FW_SECURE_BLOB_HEADER_LEN 8
 157
 158 #define FW_WORK_STATE_IDLE 1
 159 #define FW_WORK_STATE_START 2
 160 #define FW_WORK_STATE_WAIT_WRITE_ANSWER 3
 161 #define FW_WORK_STATE_WAIT_CHECK_ANSWER 4
 162 #define FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER 5
 163
 164 struct pn544_i2c_phy {
 165         struct i2c_client *i2c_dev;
 166         struct nfc_hci_dev *hdev;
 167
 168         unsigned int gpio_en;
 169         unsigned int gpio_irq;
 170         unsigned int gpio_fw;
 171         unsigned int en_polarity;
 172
 173         u8 hw_variant;
 174
 175         struct work_struct fw_work;
 176         int fw_work_state;
 177         char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
 178         const struct firmware *fw;
 179         u32 fw_blob_dest_addr;
 180         size_t fw_blob_size;
 181         const u8 *fw_blob_data;
 182         size_t fw_written;
 183         size_t fw_size;
 184
 185         int fw_cmd_result;
 186
 187         int powered;
 188         int run_mode;
 189
 190         int hard_fault;         /*
 191                                  * < 0 if hardware error occured (e.g. i2c err)
 192                                  * and prevents normal operation.
 193                                  */
 194 };
 195
 196 #define I2C_DUMP_SKB(info, skb)                                 \
 197 do {                                                            \
 198         pr_debug("%s:\n", info);                                \
 199         print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \
 200                        16, 1, (skb)->data, (skb)->len, 0);      \
 201 } while (0)
 202
 203 static void pn544_hci_i2c_platform_init(struct pn544_i2c_phy *phy)
 204 {
 205         int polarity, retry, ret;
 206         char rset_cmd[] = { 0x05, 0xF9, 0x04, 0x00, 0xC3, 0xE5 };
 207         int count = sizeof(rset_cmd);
 208
 209         nfc_info(&phy->i2c_dev->dev, "Detecting nfc_en polarity\n");
 210
 211         /* Disable fw download */
 212         gpio_set_value_cansleep(phy->gpio_fw, 0);
 213
 214         for (polarity = 0; polarity < 2; polarity++) {
 215                 phy->en_polarity = polarity;
 216                 retry = 3;
 217                 while (retry--) {
 218                         /* power off */
 219                         gpio_set_value_cansleep(phy->gpio_en,
 220                                                 !phy->en_polarity);
 221                         usleep_range(10000, 15000);
 222
 223                         /* power on */
 224                         gpio_set_value_cansleep(phy->gpio_en, phy->en_polarity);
 225                         usleep_range(10000, 15000);
 226
 227                         /* send reset */
 228                         dev_dbg(&phy->i2c_dev->dev, "Sending reset cmd\n");
 229                         ret = i2c_master_send(phy->i2c_dev, rset_cmd, count);
 230                         if (ret == count) {
 231                                 nfc_info(&phy->i2c_dev->dev,
 232                                          "nfc_en polarity : active %s\n",
 233                                          (polarity == 0 ? "low" : "high"));
 234                                 goto out;
 235                         }
 236                 }
 237         }
 238
 239         nfc_err(&phy->i2c_dev->dev,
 240                 "Could not detect nfc_en polarity, fallback to active high\n");
 241
 242 out:
 243         gpio_set_value_cansleep(phy->gpio_en, !phy->en_polarity);
 244 }
 245
 246 static void pn544_hci_i2c_enable_mode(struct pn544_i2c_phy *phy, int run_mode)
 247 {
 248         gpio_set_value_cansleep(phy->gpio_fw,
 249                                 run_mode == PN544_FW_MODE ? 1 : 0);
 250         gpio_set_value_cansleep(phy->gpio_en, phy->en_polarity);
 251         usleep_range(10000, 15000);
 252
 253         phy->run_mode = run_mode;
 254 }
 255
 256 static int pn544_hci_i2c_enable(void *phy_id)
 257 {
 258         struct pn544_i2c_phy *phy = phy_id;
 259
 260         pr_info("%s\n", __func__);
 261
 262         pn544_hci_i2c_enable_mode(phy, PN544_HCI_MODE);
 263
 264         phy->powered = 1;
 265
 266         return 0;
 267 }
 268
 269 static void pn544_hci_i2c_disable(void *phy_id)
 270 {
 271         struct pn544_i2c_phy *phy = phy_id;
 272
 273         gpio_set_value_cansleep(phy->gpio_fw, 0);
 274         gpio_set_value_cansleep(phy->gpio_en, !phy->en_polarity);
 275         usleep_range(10000, 15000);
 276
 277         gpio_set_value_cansleep(phy->gpio_en, phy->en_polarity);
 278         usleep_range(10000, 15000);
 279
 280         gpio_set_value_cansleep(phy->gpio_en, !phy->en_polarity);
 281         usleep_range(10000, 15000);
 282
 283         phy->powered = 0;
 284 }
 285
 286 static void pn544_hci_i2c_add_len_crc(struct sk_buff *skb)
 287 {
 288         u16 crc;
 289         int len;
 290
 291         len = skb->len + 2;
 292         *skb_push(skb, 1) = len;
 293
 294         crc = crc_ccitt(0xffff, skb->data, skb->len);
 295         crc = ~crc;
 296         *skb_put(skb, 1) = crc & 0xff;
 297         *skb_put(skb, 1) = crc >> 8;
 298 }
 299
 300 static void pn544_hci_i2c_remove_len_crc(struct sk_buff *skb)
 301 {
 302         skb_pull(skb, PN544_I2C_FRAME_HEADROOM);
 303         skb_trim(skb, PN544_I2C_FRAME_TAILROOM);
 304 }
 305
 306 /*
 307  * Writing a frame must not return the number of written bytes.
 308  * It must return either zero for success, or <0 for error.
 309  * In addition, it must not alter the skb
 310  */
 311 static int pn544_hci_i2c_write(void *phy_id, struct sk_buff *skb)
 312 {
 313         int r;
 314         struct pn544_i2c_phy *phy = phy_id;
 315         struct i2c_client *client = phy->i2c_dev;
 316
 317         if (phy->hard_fault != 0)
 318                 return phy->hard_fault;
 319
 320         usleep_range(3000, 6000);
 321
 322         pn544_hci_i2c_add_len_crc(skb);
 323
 324         I2C_DUMP_SKB("i2c frame written", skb);
 325
 326         r = i2c_master_send(client, skb->data, skb->len);
 327
 328         if (r == -EREMOTEIO) {  /* Retry, chip was in standby */
 329                 usleep_range(6000, 10000);
 330                 r = i2c_master_send(client, skb->data, skb->len);
 331         }
 332
 333         if (r >= 0) {
 334                 if (r != skb->len)
 335                         r = -EREMOTEIO;
 336                 else
 337                         r = 0;
 338         }
 339
 340         pn544_hci_i2c_remove_len_crc(skb);
 341
 342         return r;
 343 }
 344
 345 static int check_crc(u8 *buf, int buflen)
 346 {
 347         int len;
 348         u16 crc;
 349
 350         len = buf[0] + 1;
 351         crc = crc_ccitt(0xffff, buf, len - 2);
 352         crc = ~crc;
 353
 354         if (buf[len - 2] != (crc & 0xff) || buf[len - 1] != (crc >> 8)) {
 355                 pr_err("CRC error 0x%x != 0x%x 0x%x\n",
 356                        crc, buf[len - 1], buf[len - 2]);
 357                 pr_info("%s: BAD CRC\n", __func__);
 358                 print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE,
 359                                16, 2, buf, buflen, false);
 360                 return -EPERM;
 361         }
 362         return 0;
 363 }
 364
 365 /*
 366  * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees
 367  * that i2c bus will be flushed and that next read will start on a new frame.
 368  * returned skb contains only LLC header and payload.
 369  * returns:
 370  * -EREMOTEIO : i2c read error (fatal)
 371  * -EBADMSG : frame was incorrect and discarded
 372  * -ENOMEM : cannot allocate skb, frame dropped
 373  */
 374 static int pn544_hci_i2c_read(struct pn544_i2c_phy *phy, struct sk_buff **skb)
 375 {
 376         int r;
 377         u8 len;
 378         u8 tmp[PN544_HCI_I2C_LLC_MAX_SIZE - 1];
 379         struct i2c_client *client = phy->i2c_dev;
 380
 381         r = i2c_master_recv(client, &len, 1);
 382         if (r != 1) {
 383                 nfc_err(&client->dev, "cannot read len byte\n");
 384                 return -EREMOTEIO;
 385         }
 386
 387         if ((len < (PN544_HCI_I2C_LLC_MIN_SIZE - 1)) ||
 388             (len > (PN544_HCI_I2C_LLC_MAX_SIZE - 1))) {
 389                 nfc_err(&client->dev, "invalid len byte\n");
 390                 r = -EBADMSG;
 391                 goto flush;
 392         }
 393
 394         *skb = alloc_skb(1 + len, GFP_KERNEL);
 395         if (*skb == NULL) {
 396                 r = -ENOMEM;
 397                 goto flush;
 398         }
 399
 400         *skb_put(*skb, 1) = len;
 401
 402         r = i2c_master_recv(client, skb_put(*skb, len), len);
 403         if (r != len) {
 404                 kfree_skb(*skb);
 405                 return -EREMOTEIO;
 406         }
 407
 408         I2C_DUMP_SKB("i2c frame read", *skb);
 409
 410         r = check_crc((*skb)->data, (*skb)->len);
 411         if (r != 0) {
 412                 kfree_skb(*skb);
 413                 r = -EBADMSG;
 414                 goto flush;
 415         }
 416
 417         skb_pull(*skb, 1);
 418         skb_trim(*skb, (*skb)->len - 2);
 419
 420         usleep_range(3000, 6000);
 421
 422         return 0;
 423
 424 flush:
 425         if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
 426                 r = -EREMOTEIO;
 427
 428         usleep_range(3000, 6000);
 429
 430         return r;
 431 }
 432
 433 static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy)
 434 {
 435         int r;
 436         struct pn544_i2c_fw_frame_response response;
 437         struct i2c_client *client = phy->i2c_dev;
 438
 439         r = i2c_master_recv(client, (char *) &response, sizeof(response));
 440         if (r != sizeof(response)) {
 441                 nfc_err(&client->dev, "cannot read fw status\n");
 442                 return -EIO;
 443         }
 444
 445         usleep_range(3000, 6000);
 446
 447         switch (response.status) {
 448         case 0:
 449                 return 0;
 450         case PN544_FW_CMD_RESULT_CHUNK_OK:
 451                 return response.status;
 452         case PN544_FW_CMD_RESULT_TIMEOUT:
 453                 return -ETIMEDOUT;
 454         case PN544_FW_CMD_RESULT_BAD_CRC:
 455                 return -ENODATA;
 456         case PN544_FW_CMD_RESULT_ACCESS_DENIED:
 457                 return -EACCES;
 458         case PN544_FW_CMD_RESULT_PROTOCOL_ERROR:
 459                 return -EPROTO;
 460         case PN544_FW_CMD_RESULT_INVALID_PARAMETER:
 461                 return -EINVAL;
 462         case PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND:
 463                 return -ENOTSUPP;
 464         case PN544_FW_CMD_RESULT_INVALID_LENGTH:
 465                 return -EBADMSG;
 466         case PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR:
 467                 return -ENOKEY;
 468         case PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR:
 469                 return -EINVAL;
 470         case PN544_FW_CMD_RESULT_MEMORY_ERROR:
 471                 return -ENOMEM;
 472         case PN544_FW_CMD_RESULT_COMMAND_REJECTED:
 473                 return -EACCES;
 474         case PN544_FW_CMD_RESULT_WRITE_FAILED:
 475         case PN544_FW_CMD_RESULT_CHUNK_ERROR:
 476                 return -EIO;
 477         default:
 478                 return -EIO;
 479         }
 480 }
 481
 482 /*
 483  * Reads an shdlc frame from the chip. This is not as straightforward as it
 484  * seems. There are cases where we could loose the frame start synchronization.
 485  * The frame format is len-data-crc, and corruption can occur anywhere while
 486  * transiting on i2c bus, such that we could read an invalid len.
 487  * In order to recover synchronization with the next frame, we must be sure
 488  * to read the real amount of data without using the len byte. We do this by
 489  * assuming the following:
 490  * - the chip will always present only one single complete frame on the bus
 491  *   before triggering the interrupt
 492  * - the chip will not present a new frame until we have completely read
 493  *   the previous one (or until we have handled the interrupt).
 494  * The tricky case is when we read a corrupted len that is less than the real
 495  * len. We must detect this here in order to determine that we need to flush
 496  * the bus. This is the reason why we check the crc here.
 497  */
 498 static irqreturn_t pn544_hci_i2c_irq_thread_fn(int irq, void *phy_id)
 499 {
 500         struct pn544_i2c_phy *phy = phy_id;
 501         struct i2c_client *client;
 502         struct sk_buff *skb = NULL;
 503         int r;
 504
 505         if (!phy || irq != phy->i2c_dev->irq) {
 506                 WARN_ON_ONCE(1);
 507                 return IRQ_NONE;
 508         }
 509
 510         client = phy->i2c_dev;
 511         dev_dbg(&client->dev, "IRQ\n");
 512
 513         if (phy->hard_fault != 0)
 514                 return IRQ_HANDLED;
 515
 516         if (phy->run_mode == PN544_FW_MODE) {
 517                 phy->fw_cmd_result = pn544_hci_i2c_fw_read_status(phy);
 518                 schedule_work(&phy->fw_work);
 519         } else {
 520                 r = pn544_hci_i2c_read(phy, &skb);
 521                 if (r == -EREMOTEIO) {
 522                         phy->hard_fault = r;
 523
 524                         nfc_hci_recv_frame(phy->hdev, NULL);
 525
 526                         return IRQ_HANDLED;
 527                 } else if ((r == -ENOMEM) || (r == -EBADMSG)) {
 528                         return IRQ_HANDLED;
 529                 }
 530
 531                 nfc_hci_recv_frame(phy->hdev, skb);
 532         }
 533         return IRQ_HANDLED;
 534 }
 535
 536 static struct nfc_phy_ops i2c_phy_ops = {
 537         .write = pn544_hci_i2c_write,
 538         .enable = pn544_hci_i2c_enable,
 539         .disable = pn544_hci_i2c_disable,
 540 };
 541
 542 static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name,
 543                                         u8 hw_variant)
 544 {
 545         struct pn544_i2c_phy *phy = phy_id;
 546
 547         pr_info("Starting Firmware Download (%s)\n", firmware_name);
 548
 549         strcpy(phy->firmware_name, firmware_name);
 550
 551         phy->hw_variant = hw_variant;
 552         phy->fw_work_state = FW_WORK_STATE_START;
 553
 554         schedule_work(&phy->fw_work);
 555
 556         return 0;
 557 }
 558
 559 static void pn544_hci_i2c_fw_work_complete(struct pn544_i2c_phy *phy,
 560                                            int result)
 561 {
 562         pr_info("Firmware Download Complete, result=%d\n", result);
 563
 564         pn544_hci_i2c_disable(phy);
 565
 566         phy->fw_work_state = FW_WORK_STATE_IDLE;
 567
 568         if (phy->fw) {
 569                 release_firmware(phy->fw);
 570                 phy->fw = NULL;
 571         }
 572
 573         nfc_fw_download_done(phy->hdev->ndev, phy->firmware_name, (u32) -result);
 574 }
 575
 576 static int pn544_hci_i2c_fw_write_cmd(struct i2c_client *client, u32 dest_addr,
 577                                       const u8 *data, u16 datalen)
 578 {
 579         u8 frame[PN544_FW_I2C_MAX_PAYLOAD];
 580         struct pn544_i2c_fw_frame_write *framep;
 581         u16 params_len;
 582         int framelen;
 583         int r;
 584
 585         if (datalen > PN544_FW_I2C_WRITE_DATA_MAX_LEN)
 586                 datalen = PN544_FW_I2C_WRITE_DATA_MAX_LEN;
 587
 588         framep = (struct pn544_i2c_fw_frame_write *) frame;
 589
 590         params_len = sizeof(framep->be_dest_addr) +
 591                      sizeof(framep->be_datalen) + datalen;
 592         framelen = params_len + sizeof(framep->cmd) +
 593                              sizeof(framep->be_length);
 594
 595         framep->cmd = PN544_FW_CMD_WRITE;
 596
 597         put_unaligned_be16(params_len, &framep->be_length);
 598
 599         framep->be_dest_addr[0] = (dest_addr & 0xff0000) >> 16;
 600         framep->be_dest_addr[1] = (dest_addr & 0xff00) >> 8;
 601         framep->be_dest_addr[2] = dest_addr & 0xff;
 602
 603         put_unaligned_be16(datalen, &framep->be_datalen);
 604
 605         memcpy(framep->data, data, datalen);
 606
 607         r = i2c_master_send(client, frame, framelen);
 608
 609         if (r == framelen)
 610                 return datalen;
 611         else if (r < 0)
 612                 return r;
 613         else
 614                 return -EIO;
 615 }
 616
 617 static int pn544_hci_i2c_fw_check_cmd(struct i2c_client *client, u32 start_addr,
 618                                       const u8 *data, u16 datalen)
 619 {
 620         struct pn544_i2c_fw_frame_check frame;
 621         int r;
 622         u16 crc;
 623
 624         /* calculate local crc for the data we want to check */
 625         crc = crc_ccitt(0xffff, data, datalen);
 626
 627         frame.cmd = PN544_FW_CMD_CHECK;
 628
 629         put_unaligned_be16(sizeof(frame.be_start_addr) +
 630                            sizeof(frame.be_datalen) + sizeof(frame.be_crc),
 631                            &frame.be_length);
 632
 633         /* tell the chip the memory region to which our crc applies */
 634         frame.be_start_addr[0] = (start_addr & 0xff0000) >> 16;
 635         frame.be_start_addr[1] = (start_addr & 0xff00) >> 8;
 636         frame.be_start_addr[2] = start_addr & 0xff;
 637
 638         put_unaligned_be16(datalen, &frame.be_datalen);
 639
 640         /*
 641          * and give our local crc. Chip will calculate its own crc for the
 642          * region and compare with ours.
 643          */
 644         put_unaligned_be16(crc, &frame.be_crc);
 645
 646         r = i2c_master_send(client, (const char *) &frame, sizeof(frame));
 647
 648         if (r == sizeof(frame))
 649                 return 0;
 650         else if (r < 0)
 651                 return r;
 652         else
 653                 return -EIO;
 654 }
 655
 656 static int pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy *phy)
 657 {
 658         int r;
 659
 660         r = pn544_hci_i2c_fw_write_cmd(phy->i2c_dev,
 661                                        phy->fw_blob_dest_addr + phy->fw_written,
 662                                        phy->fw_blob_data + phy->fw_written,
 663                                        phy->fw_blob_size - phy->fw_written);
 664         if (r < 0)
 665                 return r;
 666
 667         phy->fw_written += r;
 668         phy->fw_work_state = FW_WORK_STATE_WAIT_WRITE_ANSWER;
 669
 670         return 0;
 671 }
 672
 673 static int pn544_hci_i2c_fw_secure_write_frame_cmd(struct pn544_i2c_phy *phy,
 674                                         const u8 *data, u16 datalen)
 675 {
 676         u8 buf[PN544_FW_I2C_MAX_PAYLOAD];
 677         struct pn544_i2c_fw_secure_frame *chunk;
 678         int chunklen;
 679         int r;
 680
 681         if (datalen > PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN)
 682                 datalen = PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN;
 683
 684         chunk = (struct pn544_i2c_fw_secure_frame *) buf;
 685
 686         chunk->cmd = PN544_FW_CMD_SECURE_CHUNK_WRITE;
 687
 688         put_unaligned_be16(datalen, &chunk->be_datalen);
 689
 690         memcpy(chunk->data, data, datalen);
 691
 692         chunklen = sizeof(chunk->cmd) + sizeof(chunk->be_datalen) + datalen;
 693
 694         r = i2c_master_send(phy->i2c_dev, buf, chunklen);
 695
 696         if (r == chunklen)
 697                 return datalen;
 698         else if (r < 0)
 699                 return r;
 700         else
 701                 return -EIO;
 702
 703 }
 704
 705 static int pn544_hci_i2c_fw_secure_write_frame(struct pn544_i2c_phy *phy)
 706 {
 707         struct pn544_i2c_fw_secure_frame *framep;
 708         int r;
 709
 710         framep = (struct pn544_i2c_fw_secure_frame *) phy->fw_blob_data;
 711         if (phy->fw_written == 0)
 712                 phy->fw_blob_size = get_unaligned_be16(&framep->be_datalen)
 713                                 + PN544_FW_SECURE_FRAME_HEADER_LEN;
 714
 715         /* Only secure write command can be chunked*/
 716         if (phy->fw_blob_size > PN544_FW_I2C_MAX_PAYLOAD &&
 717                         framep->cmd != PN544_FW_CMD_SECURE_WRITE)
 718                 return -EINVAL;
 719
 720         /* The firmware also have other commands, we just send them directly */
 721         if (phy->fw_blob_size < PN544_FW_I2C_MAX_PAYLOAD) {
 722                 r = i2c_master_send(phy->i2c_dev,
 723                         (const char *) phy->fw_blob_data, phy->fw_blob_size);
 724
 725                 if (r == phy->fw_blob_size)
 726                         goto exit;
 727                 else if (r < 0)
 728                         return r;
 729                 else
 730                         return -EIO;
 731         }
 732
 733         r = pn544_hci_i2c_fw_secure_write_frame_cmd(phy,
 734                                        phy->fw_blob_data + phy->fw_written,
 735                                        phy->fw_blob_size - phy->fw_written);
 736         if (r < 0)
 737                 return r;
 738
 739 exit:
 740         phy->fw_written += r;
 741         phy->fw_work_state = FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER;
 742
 743         /* SW reset command will not trig any response from PN544 */
 744         if (framep->cmd == PN544_FW_CMD_RESET) {
 745                 pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE);
 746                 phy->fw_cmd_result = 0;
 747                 schedule_work(&phy->fw_work);
 748         }
 749
 750         return 0;
 751 }
 752
 753 static void pn544_hci_i2c_fw_work(struct work_struct *work)
 754 {
 755         struct pn544_i2c_phy *phy = container_of(work, struct pn544_i2c_phy,
 756                                                 fw_work);
 757         int r;
 758         struct pn544_i2c_fw_blob *blob;
 759         struct pn544_i2c_fw_secure_blob *secure_blob;
 760
 761         switch (phy->fw_work_state) {
 762         case FW_WORK_STATE_START:
 763                 pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE);
 764
 765                 r = request_firmware(&phy->fw, phy->firmware_name,
 766                                      &phy->i2c_dev->dev);
 767                 if (r < 0)
 768                         goto exit_state_start;
 769
 770                 phy->fw_written = 0;
 771
 772                 switch (phy->hw_variant) {
 773                 case PN544_HW_VARIANT_C2:
 774                         blob = (struct pn544_i2c_fw_blob *) phy->fw->data;
 775                         phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
 776                         phy->fw_blob_dest_addr = get_unaligned_be32(
 777                                                         &blob->be_destaddr);
 778                         phy->fw_blob_data = blob->data;
 779
 780                         r = pn544_hci_i2c_fw_write_chunk(phy);
 781                         break;
 782                 case PN544_HW_VARIANT_C3:
 783                         secure_blob = (struct pn544_i2c_fw_secure_blob *)
 784                                                                 phy->fw->data;
 785                         phy->fw_blob_data = secure_blob->data;
 786                         phy->fw_size = phy->fw->size;
 787                         r = pn544_hci_i2c_fw_secure_write_frame(phy);
 788                         break;
 789                 default:
 790                         r = -ENOTSUPP;
 791                         break;
 792                 }
 793
 794 exit_state_start:
 795                 if (r < 0)
 796                         pn544_hci_i2c_fw_work_complete(phy, r);
 797                 break;
 798
 799         case FW_WORK_STATE_WAIT_WRITE_ANSWER:
 800                 r = phy->fw_cmd_result;
 801                 if (r < 0)
 802                         goto exit_state_wait_write_answer;
 803
 804                 if (phy->fw_written == phy->fw_blob_size) {
 805                         r = pn544_hci_i2c_fw_check_cmd(phy->i2c_dev,
 806                                                        phy->fw_blob_dest_addr,
 807                                                        phy->fw_blob_data,
 808                                                        phy->fw_blob_size);
 809                         if (r < 0)
 810                                 goto exit_state_wait_write_answer;
 811                         phy->fw_work_state = FW_WORK_STATE_WAIT_CHECK_ANSWER;
 812                         break;
 813                 }
 814
 815                 r = pn544_hci_i2c_fw_write_chunk(phy);
 816
 817 exit_state_wait_write_answer:
 818                 if (r < 0)
 819                         pn544_hci_i2c_fw_work_complete(phy, r);
 820                 break;
 821
 822         case FW_WORK_STATE_WAIT_CHECK_ANSWER:
 823                 r = phy->fw_cmd_result;
 824                 if (r < 0)
 825                         goto exit_state_wait_check_answer;
 826
 827                 blob = (struct pn544_i2c_fw_blob *) (phy->fw_blob_data +
 828                        phy->fw_blob_size);
 829                 phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
 830                 if (phy->fw_blob_size != 0) {
 831                         phy->fw_blob_dest_addr =
 832                                         get_unaligned_be32(&blob->be_destaddr);
 833                         phy->fw_blob_data = blob->data;
 834
 835                         phy->fw_written = 0;
 836                         r = pn544_hci_i2c_fw_write_chunk(phy);
 837                 }
 838
 839 exit_state_wait_check_answer:
 840                 if (r < 0 || phy->fw_blob_size == 0)
 841                         pn544_hci_i2c_fw_work_complete(phy, r);
 842                 break;
 843
 844         case FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER:
 845                 r = phy->fw_cmd_result;
 846                 if (r < 0)
 847                         goto exit_state_wait_secure_write_answer;
 848
 849                 if (r == PN544_FW_CMD_RESULT_CHUNK_OK) {
 850                         r = pn544_hci_i2c_fw_secure_write_frame(phy);
 851                         goto exit_state_wait_secure_write_answer;
 852                 }
 853
 854                 if (phy->fw_written == phy->fw_blob_size) {
 855                         secure_blob = (struct pn544_i2c_fw_secure_blob *)
 856                                 (phy->fw_blob_data + phy->fw_blob_size);
 857                         phy->fw_size -= phy->fw_blob_size +
 858                                 PN544_FW_SECURE_BLOB_HEADER_LEN;
 859                         if (phy->fw_size >= PN544_FW_SECURE_BLOB_HEADER_LEN
 860                                         + PN544_FW_SECURE_FRAME_HEADER_LEN) {
 861                                 phy->fw_blob_data = secure_blob->data;
 862
 863                                 phy->fw_written = 0;
 864                                 r = pn544_hci_i2c_fw_secure_write_frame(phy);
 865                         }
 866                 }
 867
 868 exit_state_wait_secure_write_answer:
 869                 if (r < 0 || phy->fw_size == 0)
 870                         pn544_hci_i2c_fw_work_complete(phy, r);
 871                 break;
 872
 873         default:
 874                 break;
 875         }
 876 }
 877
 878 static int pn544_hci_i2c_acpi_request_resources(struct i2c_client *client)
 879 {
 880         struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
 881         const struct acpi_device_id *id;
 882         struct gpio_desc *gpiod_en, *gpiod_irq, *gpiod_fw;
 883         struct device *dev;
 884         int ret;
 885
 886         if (!client)
 887                 return -EINVAL;
 888
 889         dev = &client->dev;
 890
 891         /* Match the struct device against a given list of ACPI IDs */
 892         id = acpi_match_device(dev->driver->acpi_match_table, dev);
 893
 894         if (!id)
 895                 return -ENODEV;
 896
 897         /* Get EN GPIO from ACPI */
 898         gpiod_en = devm_gpiod_get_index(dev, PN544_GPIO_NAME_EN, 1);
 899         if (IS_ERR(gpiod_en)) {
 900                 nfc_err(dev,
 901                         "Unable to get EN GPIO\n");
 902                 return -ENODEV;
 903         }
 904
 905         phy->gpio_en  = desc_to_gpio(gpiod_en);
 906
 907         /* Configuration EN GPIO */
 908         ret = gpiod_direction_output(gpiod_en, 0);
 909         if (ret) {
 910                 nfc_err(dev, "Fail EN pin direction\n");
 911                 return ret;
 912         }
 913
 914         /* Get FW GPIO from ACPI */
 915         gpiod_fw = devm_gpiod_get_index(dev, PN544_GPIO_NAME_FW, 2);
 916         if (IS_ERR(gpiod_fw)) {
 917                 nfc_err(dev,
 918                         "Unable to get FW GPIO\n");
 919                 return -ENODEV;
 920         }
 921
 922         phy->gpio_fw  = desc_to_gpio(gpiod_fw);
 923
 924         /* Configuration FW GPIO */
 925         ret = gpiod_direction_output(gpiod_fw, 0);
 926         if (ret) {
 927                 nfc_err(dev, "Fail FW pin direction\n");
 928                 return ret;
 929         }
 930
 931         /* Get IRQ GPIO */
 932         gpiod_irq = devm_gpiod_get_index(dev, PN544_GPIO_NAME_IRQ, 0);
 933         if (IS_ERR(gpiod_irq)) {
 934                 nfc_err(dev,
 935                         "Unable to get IRQ GPIO\n");
 936                 return -ENODEV;
 937         }
 938
 939         phy->gpio_irq = desc_to_gpio(gpiod_irq);
 940
 941         /* Configure IRQ GPIO */
 942         ret = gpiod_direction_input(gpiod_irq);
 943         if (ret) {
 944                 nfc_err(dev, "Fail IRQ pin direction\n");
 945                 return ret;
 946         }
 947
 948         /* Map the pin to an IRQ */
 949         ret = gpiod_to_irq(gpiod_irq);
 950         if (ret < 0) {
 951                 nfc_err(dev, "Fail pin IRQ mapping\n");
 952                 return ret;
 953         }
 954
 955         nfc_info(dev, "GPIO resource, no:%d irq:%d\n",
 956                         desc_to_gpio(gpiod_irq), ret);
 957         client->irq = ret;
 958
 959         return 0;
 960 }
 961
 962 #ifdef CONFIG_OF
 963
 964 static int pn544_hci_i2c_of_request_resources(struct i2c_client *client)
 965 {
 966         struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
 967         struct device_node *pp;
 968         int ret;
 969
 970         pp = client->dev.of_node;
 971         if (!pp) {
 972                 ret = -ENODEV;
 973                 goto err_dt;
 974         }
 975
 976         /* Obtention of EN GPIO from device tree */
 977         ret = of_get_named_gpio(pp, "enable-gpios", 0);
 978         if (ret < 0) {
 979                 if (ret != -EPROBE_DEFER)
 980                         nfc_err(&client->dev,
 981                                 "Failed to get EN gpio, error: %d\n", ret);
 982                 goto err_dt;
 983         }
 984         phy->gpio_en = ret;
 985
 986         /* Configuration of EN GPIO */
 987         ret = gpio_request(phy->gpio_en, PN544_GPIO_NAME_EN);
 988         if (ret) {
 989                 nfc_err(&client->dev, "Fail EN pin\n");
 990                 goto err_dt;
 991         }
 992         ret = gpio_direction_output(phy->gpio_en, 0);
 993         if (ret) {
 994                 nfc_err(&client->dev, "Fail EN pin direction\n");
 995                 goto err_gpio_en;
 996         }
 997
 998         /* Obtention of FW GPIO from device tree */
 999         ret = of_get_named_gpio(pp, "firmware-gpios", 0);
1000         if (ret < 0) {
1001                 if (ret != -EPROBE_DEFER)
1002                         nfc_err(&client->dev,
1003                                 "Failed to get FW gpio, error: %d\n", ret);
1004                 goto err_gpio_en;
1005         }
1006         phy->gpio_fw = ret;
1007
1008         /* Configuration of FW GPIO */
1009         ret = gpio_request(phy->gpio_fw, PN544_GPIO_NAME_FW);
1010         if (ret) {
1011                 nfc_err(&client->dev, "Fail FW pin\n");
1012                 goto err_gpio_en;
1013         }
1014         ret = gpio_direction_output(phy->gpio_fw, 0);
1015         if (ret) {
1016                 nfc_err(&client->dev, "Fail FW pin direction\n");
1017                 goto err_gpio_fw;
1018         }
1019
1020         /* IRQ */
1021         ret = irq_of_parse_and_map(pp, 0);
1022         if (ret < 0) {
1023                 nfc_err(&client->dev,
1024                         "Unable to get irq, error: %d\n", ret);
1025                 goto err_gpio_fw;
1026         }
1027         client->irq = ret;
1028
1029         return 0;
1030
1031 err_gpio_fw:
1032         gpio_free(phy->gpio_fw);
1033 err_gpio_en:
1034         gpio_free(phy->gpio_en);
1035 err_dt:
1036         return ret;
1037 }
1038
1039 #else
1040
1041 static int pn544_hci_i2c_of_request_resources(struct i2c_client *client)
1042 {
1043         return -ENODEV;
1044 }
1045
1046 #endif
1047
1048 static int pn544_hci_i2c_probe(struct i2c_client *client,
1049                                const struct i2c_device_id *id)
1050 {
1051         struct pn544_i2c_phy *phy;
1052         struct pn544_nfc_platform_data *pdata;
1053         int r = 0;
1054
1055         dev_dbg(&client->dev, "%s\n", __func__);
1056         dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
1057
1058         if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
1059                 nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
1060                 return -ENODEV;
1061         }
1062
1063         phy = devm_kzalloc(&client->dev, sizeof(struct pn544_i2c_phy),
1064                            GFP_KERNEL);
1065         if (!phy) {
1066                 nfc_err(&client->dev,
1067                         "Cannot allocate memory for pn544 i2c phy.\n");
1068                 return -ENOMEM;
1069         }
1070
1071         INIT_WORK(&phy->fw_work, pn544_hci_i2c_fw_work);
1072         phy->fw_work_state = FW_WORK_STATE_IDLE;
1073
1074         phy->i2c_dev = client;
1075         i2c_set_clientdata(client, phy);
1076
1077         pdata = client->dev.platform_data;
1078
1079         /* No platform data, using device tree. */
1080         if (!pdata && client->dev.of_node) {
1081                 r = pn544_hci_i2c_of_request_resources(client);
1082                 if (r) {
1083                         nfc_err(&client->dev, "No DT data\n");
1084                         return r;
1085                 }
1086         /* Using platform data. */
1087         } else if (pdata) {
1088
1089                 if (pdata->request_resources == NULL) {
1090                         nfc_err(&client->dev, "request_resources() missing\n");
1091                         return -EINVAL;
1092                 }
1093
1094                 r = pdata->request_resources(client);
1095                 if (r) {
1096                         nfc_err(&client->dev,
1097                                 "Cannot get platform resources\n");
1098                         return r;
1099                 }
1100
1101                 phy->gpio_en = pdata->get_gpio(NFC_GPIO_ENABLE);
1102                 phy->gpio_fw = pdata->get_gpio(NFC_GPIO_FW_RESET);
1103                 phy->gpio_irq = pdata->get_gpio(NFC_GPIO_IRQ);
1104         /* Using ACPI */
1105         } else if (ACPI_HANDLE(&client->dev)) {
1106                 r = pn544_hci_i2c_acpi_request_resources(client);
1107                 if (r) {
1108                         nfc_err(&client->dev,
1109                                 "Cannot get ACPI data\n");
1110                         return r;
1111                 }
1112         } else {
1113                 nfc_err(&client->dev, "No platform data\n");
1114                 return -EINVAL;
1115         }
1116
1117         pn544_hci_i2c_platform_init(phy);
1118
1119         r = request_threaded_irq(client->irq, NULL, pn544_hci_i2c_irq_thread_fn,
1120                                  IRQF_TRIGGER_RISING | IRQF_ONESHOT,
1121                                  PN544_HCI_I2C_DRIVER_NAME, phy);
1122         if (r < 0) {
1123                 nfc_err(&client->dev, "Unable to register IRQ handler\n");
1124                 goto err_rti;
1125         }
1126
1127         r = pn544_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
1128                             PN544_I2C_FRAME_HEADROOM, PN544_I2C_FRAME_TAILROOM,
1129                             PN544_HCI_I2C_LLC_MAX_PAYLOAD,
1130                             pn544_hci_i2c_fw_download, &phy->hdev);
1131         if (r < 0)
1132                 goto err_hci;
1133
1134         return 0;
1135
1136 err_hci:
1137         free_irq(client->irq, phy);
1138
1139 err_rti:
1140         if (!pdata) {
1141                 gpio_free(phy->gpio_en);
1142                 gpio_free(phy->gpio_fw);
1143         } else if (pdata->free_resources) {
1144                 pdata->free_resources();
1145         }
1146
1147         return r;
1148 }
1149
1150 static int pn544_hci_i2c_remove(struct i2c_client *client)
1151 {
1152         struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
1153         struct pn544_nfc_platform_data *pdata = client->dev.platform_data;
1154
1155         dev_dbg(&client->dev, "%s\n", __func__);
1156
1157         cancel_work_sync(&phy->fw_work);
1158         if (phy->fw_work_state != FW_WORK_STATE_IDLE)
1159                 pn544_hci_i2c_fw_work_complete(phy, -ENODEV);
1160
1161         pn544_hci_remove(phy->hdev);
1162
1163         if (phy->powered)
1164                 pn544_hci_i2c_disable(phy);
1165
1166         free_irq(client->irq, phy);
1167
1168         /* No platform data, GPIOs have been requested by this driver */
1169         if (!pdata) {
1170                 gpio_free(phy->gpio_en);
1171                 gpio_free(phy->gpio_fw);
1172         /* Using platform data */
1173         } else if (pdata->free_resources) {
1174                 pdata->free_resources();
1175         }
1176
1177         return 0;
1178 }
1179
1180 static const struct of_device_id of_pn544_i2c_match[] = {
1181         { .compatible = "nxp,pn544-i2c", },
1182         {},
1183 };
1184 MODULE_DEVICE_TABLE(of, of_pn544_i2c_match);
1185
1186 static struct i2c_driver pn544_hci_i2c_driver = {
1187         .driver = {
1188                    .name = PN544_HCI_I2C_DRIVER_NAME,
1189                    .owner  = THIS_MODULE,
1190                    .of_match_table = of_match_ptr(of_pn544_i2c_match),
1191                    .acpi_match_table = ACPI_PTR(pn544_hci_i2c_acpi_match),
1192                   },
1193         .probe = pn544_hci_i2c_probe,
1194         .id_table = pn544_hci_i2c_id_table,
1195         .remove = pn544_hci_i2c_remove,
1196 };
1197
1198 module_i2c_driver(pn544_hci_i2c_driver);
1199
1200 MODULE_LICENSE("GPL");
1201 MODULE_DESCRIPTION(DRIVER_DESC);