2 * Linux ARCnet driver - COM20020 PCI support
3 * Contemporary Controls PCI20 and SOHARD SH-ARC PCI
5 * Written 1994-1999 by Avery Pennarun,
6 * based on an ISA version by David Woodhouse.
8 * Derived from skeleton.c by Donald Becker.
10 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
11 * for sponsoring the further development of this driver.
13 * **********************
15 * The original copyright of skeleton.c was as follows:
17 * skeleton.c Written 1993 by Donald Becker.
18 * Copyright 1993 United States Government as represented by the
19 * Director, National Security Agency. This software may only be used
20 * and distributed according to the terms of the GNU General Public License as
21 * modified by SRC, incorporated herein by reference.
23 * **********************
25 * For more details, see drivers/net/arcnet.c
27 * **********************
30 #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
32 #include <linux/module.h>
33 #include <linux/moduleparam.h>
34 #include <linux/kernel.h>
35 #include <linux/types.h>
36 #include <linux/ioport.h>
37 #include <linux/errno.h>
38 #include <linux/netdevice.h>
39 #include <linux/init.h>
40 #include <linux/interrupt.h>
41 #include <linux/pci.h>
42 #include <linux/list.h>
44 #include <linux/leds.h>
46 #include "arcdevice.h"
49 /* Module parameters */
52 static char device[9]; /* use eg. device="arc1" to change name */
53 static int timeout = 3;
58 module_param(node, int, 0);
59 module_param_string(device, device, sizeof(device), 0);
60 module_param(timeout, int, 0);
61 module_param(backplane, int, 0);
62 module_param(clockp, int, 0);
63 module_param(clockm, int, 0);
64 MODULE_LICENSE("GPL");
66 static void led_tx_set(struct led_classdev *led_cdev,
67 enum led_brightness value)
69 struct com20020_dev *card;
70 struct com20020_priv *priv;
71 struct com20020_pci_card_info *ci;
73 card = container_of(led_cdev, struct com20020_dev, tx_led);
75 priv = card->pci_priv;
78 outb(!!value, priv->misc + ci->leds[card->index].green);
81 static void led_recon_set(struct led_classdev *led_cdev,
82 enum led_brightness value)
84 struct com20020_dev *card;
85 struct com20020_priv *priv;
86 struct com20020_pci_card_info *ci;
88 card = container_of(led_cdev, struct com20020_dev, recon_led);
90 priv = card->pci_priv;
93 outb(!!value, priv->misc + ci->leds[card->index].red);
96 static ssize_t backplane_mode_show(struct device *dev,
97 struct device_attribute *attr,
100 struct net_device *net_dev = to_net_dev(dev);
101 struct arcnet_local *lp = netdev_priv(net_dev);
103 return sprintf(buf, "%s\n", lp->backplane ? "true" : "false");
105 static DEVICE_ATTR_RO(backplane_mode);
107 static struct attribute *com20020_state_attrs[] = {
108 &dev_attr_backplane_mode.attr,
112 static const struct attribute_group com20020_state_group = {
114 .attrs = com20020_state_attrs,
117 static void com20020pci_remove(struct pci_dev *pdev);
119 static int com20020pci_probe(struct pci_dev *pdev,
120 const struct pci_device_id *id)
122 struct com20020_pci_card_info *ci;
123 struct com20020_pci_channel_map *mm;
124 struct net_device *dev;
125 struct arcnet_local *lp;
126 struct com20020_priv *priv;
132 if (pci_enable_device(pdev))
135 priv = devm_kzalloc(&pdev->dev, sizeof(struct com20020_priv),
140 ci = (struct com20020_pci_card_info *)id->driver_data;
144 pci_set_drvdata(pdev, priv);
146 INIT_LIST_HEAD(&priv->list_dev);
149 ioaddr = pci_resource_start(pdev, mm->bar) + mm->offset;
150 r = devm_request_region(&pdev->dev, ioaddr, mm->size,
153 pr_err("IO region %xh-%xh already allocated.\n",
154 ioaddr, ioaddr + mm->size - 1);
160 for (i = 0; i < ci->devcount; i++) {
161 struct com20020_pci_channel_map *cm = &ci->chan_map_tbl[i];
162 struct com20020_dev *card;
163 int dev_id_mask = 0xf;
165 dev = alloc_arcdev(device);
172 dev->netdev_ops = &com20020_netdev_ops;
174 lp = netdev_priv(dev);
176 arc_printk(D_NORMAL, dev, "%s Controls\n", ci->name);
177 ioaddr = pci_resource_start(pdev, cm->bar) + cm->offset;
179 r = devm_request_region(&pdev->dev, ioaddr, cm->size,
182 pr_err("IO region %xh-%xh already allocated\n",
183 ioaddr, ioaddr + cm->size - 1);
185 goto err_free_arcdev;
188 /* Dummy access after Reset
189 * ARCNET controller needs
190 * this access to detect bustype
192 arcnet_outb(0x00, ioaddr, COM20020_REG_W_COMMAND);
193 arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT);
195 SET_NETDEV_DEV(dev, &pdev->dev);
196 dev->base_addr = ioaddr;
197 arcnet_set_addr(dev, node);
198 dev->sysfs_groups[0] = &com20020_state_group;
199 dev->irq = pdev->irq;
200 lp->card_name = "PCI COM20020";
201 lp->card_flags = ci->flags;
202 lp->backplane = backplane;
203 lp->clockp = clockp & 7;
204 lp->clockm = clockm & 3;
205 lp->timeout = timeout;
206 lp->hw.owner = THIS_MODULE;
208 lp->backplane = (inb(priv->misc) >> (2 + i)) & 0x1;
210 if (!strncmp(ci->name, "EAE PLX-PCI FB2", 15))
213 /* Get the dev_id from the PLX rotary coder */
214 if (!strncmp(ci->name, "EAE PLX-PCI MA1", 15))
216 dev->dev_id = (inb(priv->misc + ci->rotary) >> 4) & dev_id_mask;
218 snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i);
220 if (arcnet_inb(ioaddr, COM20020_REG_R_STATUS) == 0xFF) {
221 pr_err("IO address %Xh is empty!\n", ioaddr);
223 goto err_free_arcdev;
225 if (com20020_check(dev)) {
227 goto err_free_arcdev;
230 card = devm_kzalloc(&pdev->dev, sizeof(struct com20020_dev),
234 goto err_free_arcdev;
238 card->pci_priv = priv;
239 card->tx_led.brightness_set = led_tx_set;
240 card->tx_led.default_trigger = devm_kasprintf(&pdev->dev,
241 GFP_KERNEL, "arc%d-%d-tx",
243 card->tx_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
244 "pci:green:tx:%d-%d",
247 card->tx_led.dev = &dev->dev;
248 card->recon_led.brightness_set = led_recon_set;
249 card->recon_led.default_trigger = devm_kasprintf(&pdev->dev,
250 GFP_KERNEL, "arc%d-%d-recon",
252 card->recon_led.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
253 "pci:red:recon:%d-%d",
255 card->recon_led.dev = &dev->dev;
258 ret = devm_led_classdev_register(&pdev->dev, &card->tx_led);
260 goto err_free_arcdev;
262 ret = devm_led_classdev_register(&pdev->dev, &card->recon_led);
264 goto err_free_arcdev;
266 dev_set_drvdata(&dev->dev, card);
268 ret = com20020_found(dev, IRQF_SHARED);
270 goto err_free_arcdev;
272 devm_arcnet_led_init(dev, dev->dev_id, i);
274 list_add(&card->list, &priv->list_dev);
282 com20020pci_remove(pdev);
286 static void com20020pci_remove(struct pci_dev *pdev)
288 struct com20020_dev *card, *tmpcard;
289 struct com20020_priv *priv;
291 priv = pci_get_drvdata(pdev);
293 list_for_each_entry_safe(card, tmpcard, &priv->list_dev, list) {
294 struct net_device *dev = card->dev;
296 unregister_netdev(dev);
297 free_irq(dev->irq, dev);
302 static struct com20020_pci_card_info card_info_10mbit = {
312 .flags = ARC_CAN_10MBIT,
315 static struct com20020_pci_card_info card_info_5mbit = {
325 .flags = ARC_IS_5MBIT,
328 static struct com20020_pci_card_info card_info_sohard = {
331 /* SOHARD needs PCI base addr 4 */
339 .flags = ARC_CAN_10MBIT,
342 static struct com20020_pci_card_info card_info_eae_arc1 = {
343 .name = "EAE PLX-PCI ARC1",
364 .flags = ARC_CAN_10MBIT,
367 static struct com20020_pci_card_info card_info_eae_ma1 = {
368 .name = "EAE PLX-PCI MA1",
396 .flags = ARC_CAN_10MBIT,
399 static struct com20020_pci_card_info card_info_eae_fb2 = {
400 .name = "EAE PLX-PCI FB2",
421 .flags = ARC_CAN_10MBIT,
424 static const struct pci_device_id com20020pci_id_table[] = {
427 PCI_ANY_ID, PCI_ANY_ID,
433 PCI_ANY_ID, PCI_ANY_ID,
439 PCI_ANY_ID, PCI_ANY_ID,
445 PCI_ANY_ID, PCI_ANY_ID,
451 PCI_ANY_ID, PCI_ANY_ID,
457 PCI_ANY_ID, PCI_ANY_ID,
463 PCI_ANY_ID, PCI_ANY_ID,
469 PCI_ANY_ID, PCI_ANY_ID,
475 PCI_ANY_ID, PCI_ANY_ID,
477 (kernel_ulong_t)&card_info_5mbit
481 PCI_ANY_ID, PCI_ANY_ID,
483 (kernel_ulong_t)&card_info_5mbit
487 PCI_ANY_ID, PCI_ANY_ID,
489 (kernel_ulong_t)&card_info_5mbit
493 PCI_ANY_ID, PCI_ANY_ID,
495 (kernel_ulong_t)&card_info_5mbit
499 PCI_ANY_ID, PCI_ANY_ID,
501 (kernel_ulong_t)&card_info_5mbit
505 PCI_ANY_ID, PCI_ANY_ID,
507 (kernel_ulong_t)&card_info_5mbit
511 PCI_ANY_ID, PCI_ANY_ID,
513 (kernel_ulong_t)&card_info_10mbit
517 PCI_ANY_ID, PCI_ANY_ID,
519 (kernel_ulong_t)&card_info_10mbit
523 PCI_ANY_ID, PCI_ANY_ID,
525 (kernel_ulong_t)&card_info_10mbit
529 PCI_ANY_ID, PCI_ANY_ID,
531 (kernel_ulong_t)&card_info_10mbit
535 PCI_ANY_ID, PCI_ANY_ID,
537 (kernel_ulong_t)&card_info_10mbit
541 PCI_ANY_ID, PCI_ANY_ID,
543 (kernel_ulong_t)&card_info_10mbit
549 (kernel_ulong_t)&card_info_sohard
555 (kernel_ulong_t)&card_info_sohard
561 (kernel_ulong_t)&card_info_eae_arc1
567 (kernel_ulong_t)&card_info_eae_ma1
573 (kernel_ulong_t)&card_info_eae_fb2
577 PCI_ANY_ID, PCI_ANY_ID,
579 (kernel_ulong_t)&card_info_10mbit
583 PCI_ANY_ID, PCI_ANY_ID,
585 (kernel_ulong_t)&card_info_10mbit
590 MODULE_DEVICE_TABLE(pci, com20020pci_id_table);
592 static struct pci_driver com20020pci_driver = {
594 .id_table = com20020pci_id_table,
595 .probe = com20020pci_probe,
596 .remove = com20020pci_remove,
599 static int __init com20020pci_init(void)
601 if (BUGLVL(D_NORMAL))
602 pr_info("%s\n", "COM20020 PCI support");
603 return pci_register_driver(&com20020pci_driver);
606 static void __exit com20020pci_cleanup(void)
608 pci_unregister_driver(&com20020pci_driver);
611 module_init(com20020pci_init)
612 module_exit(com20020pci_cleanup)