2 * Renesas Technology Corp. SH7786 Urquell Support.
5 * Copyright (C) 2009, 2010 Paul Mundt
7 * Based on board-sh7785lcr.c
8 * Copyright (C) 2008 Yoshihiro Shimoda
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file "COPYING" in the main directory of this archive
14 #include <linux/init.h>
15 #include <linux/platform_device.h>
17 #include <linux/smc91x.h>
18 #include <linux/mtd/physmap.h>
19 #include <linux/delay.h>
20 #include <linux/gpio.h>
21 #include <linux/irq.h>
22 #include <linux/clk.h>
23 #include <mach/urquell.h>
24 #include <cpu/sh7786.h>
25 #include <asm/heartbeat.h>
26 #include <asm/sizes.h>
30 *----------------------------
31 * SW1 0101 0010 -> Pck 33MHz version
32 * (1101 0010) Pck 66MHz version
33 * SW2 0x1x xxxx -> little endian
35 * SW47 0001 1000 -> CS0 : on-board flash
36 * CS1 : SRAM, registers, LAN, PCMCIA
40 * 0x00000000 - 0x04000000 (CS0) Nor Flash
41 * 0x04000000 - 0x04200000 (CS1) SRAM
42 * 0x05000000 - 0x05800000 (CS1) on board register
43 * 0x05800000 - 0x06000000 (CS1) LAN91C111
44 * 0x06000000 - 0x06400000 (CS1) PCMCIA
45 * 0x08000000 - 0x10000000 (CS2-CS3) DDR3
46 * 0x10000000 - 0x14000000 (CS4) PCIe
47 * 0x14000000 - 0x14800000 (CS5) Core0 LRAM/URAM
48 * 0x14800000 - 0x15000000 (CS5) Core1 LRAM/URAM
49 * 0x18000000 - 0x1C000000 (CS6) ATA/NAND-Flash
50 * 0x1C000000 - (CS7) SH7786 Control register
54 static struct resource heartbeat_resource = {
55 .start = BOARDREG(SLEDR),
56 .end = BOARDREG(SLEDR),
57 .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
60 static struct platform_device heartbeat_device = {
64 .resource = &heartbeat_resource,
68 static struct smc91x_platdata smc91x_info = {
69 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
72 static struct resource smc91x_eth_resources[] = {
77 .flags = IORESOURCE_MEM,
81 .flags = IORESOURCE_IRQ,
85 static struct platform_device smc91x_eth_device = {
87 .num_resources = ARRAY_SIZE(smc91x_eth_resources),
88 .resource = smc91x_eth_resources,
90 .platform_data = &smc91x_info,
95 static struct mtd_partition nor_flash_partitions[] = {
100 .mask_flags = MTD_WRITEABLE, /* Read-only */
104 .offset = MTDPART_OFS_APPEND,
106 .mask_flags = MTD_WRITEABLE, /* Read-only */
110 .offset = MTDPART_OFS_APPEND,
115 .offset = MTDPART_OFS_APPEND,
116 .size = MTDPART_SIZ_FULL,
120 static struct physmap_flash_data nor_flash_data = {
122 .parts = nor_flash_partitions,
123 .nr_parts = ARRAY_SIZE(nor_flash_partitions),
126 static struct resource nor_flash_resources[] = {
128 .start = NOR_FLASH_ADDR,
129 .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
130 .flags = IORESOURCE_MEM,
134 static struct platform_device nor_flash_device = {
135 .name = "physmap-flash",
137 .platform_data = &nor_flash_data,
139 .num_resources = ARRAY_SIZE(nor_flash_resources),
140 .resource = nor_flash_resources,
143 static struct platform_device *urquell_devices[] __initdata = {
149 static int __init urquell_devices_setup(void)
152 gpio_request(GPIO_FN_USB_OVC0, NULL);
153 gpio_request(GPIO_FN_USB_PENC0, NULL);
156 __raw_writew(__raw_readw(UBOARDREG(IRL2MSKR)) & ~0x00000001,
157 UBOARDREG(IRL2MSKR));
159 return platform_add_devices(urquell_devices,
160 ARRAY_SIZE(urquell_devices));
162 device_initcall(urquell_devices_setup);
164 static void urquell_power_off(void)
166 __raw_writew(0xa5a5, UBOARDREG(SRSTR));
169 static void __init urquell_init_irq(void)
171 plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
174 static int urquell_mode_pins(void)
176 return __raw_readw(UBOARDREG(MDSWMR));
179 static int urquell_clk_init(void)
185 * Only handle the EXTAL case, anyone interfacing a crystal
186 * resonator will need to provide their own input clock.
188 if (test_mode_pin(MODE_PIN9))
191 clk = clk_get(NULL, "extal");
192 if (!clk || IS_ERR(clk))
194 ret = clk_set_rate(clk, 33333333);
200 /* Initialize the board */
201 static void __init urquell_setup(char **cmdline_p)
203 printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
205 pm_power_off = urquell_power_off;
211 static struct sh_machine_vector mv_urquell __initmv = {
212 .mv_name = "Urquell",
213 .mv_setup = urquell_setup,
214 .mv_init_irq = urquell_init_irq,
215 .mv_mode_pins = urquell_mode_pins,
216 .mv_clk_init = urquell_clk_init,