drivers/net/wireless/ti/wlcore/sdio.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * This file is part of wl1271
   4  *
   5  * Copyright (C) 2009-2010 Nokia Corporation
   6  *
   7  * Contact: Luciano Coelho <[email protected]>
   8  */
   9
  10 #include <linux/irq.h>
  11 #include <linux/module.h>
  12 #include <linux/vmalloc.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/mmc/sdio.h>
  15 #include <linux/mmc/sdio_func.h>
  16 #include <linux/mmc/sdio_ids.h>
  17 #include <linux/mmc/card.h>
  18 #include <linux/mmc/host.h>
  19 #include <linux/gpio.h>
  20 #include <linux/pm_runtime.h>
  21 #include <linux/printk.h>
  22 #include <linux/of.h>
  23 #include <linux/of_irq.h>
  24
  25 #include "wlcore.h"
  26 #include "wl12xx_80211.h"
  27 #include "io.h"
  28
  29 static bool dump = false;
  30
  31 struct wl12xx_sdio_glue {
  32         struct device *dev;
  33         struct platform_device *core;
  34 };
  35
  36 static const struct sdio_device_id wl1271_devices[] = {
  37         { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) },
  38         {}
  39 };
  40 MODULE_DEVICE_TABLE(sdio, wl1271_devices);
  41
  42 static void wl1271_sdio_set_block_size(struct device *child,
  43                                        unsigned int blksz)
  44 {
  45         struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
  46         struct sdio_func *func = dev_to_sdio_func(glue->dev);
  47
  48         sdio_claim_host(func);
  49         sdio_set_block_size(func, blksz);
  50         sdio_release_host(func);
  51 }
  52
  53 static int __must_check wl12xx_sdio_raw_read(struct device *child, int addr,
  54                                              void *buf, size_t len, bool fixed)
  55 {
  56         int ret;
  57         struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
  58         struct sdio_func *func = dev_to_sdio_func(glue->dev);
  59
  60         sdio_claim_host(func);
  61
  62         if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) {
  63                 ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret);
  64                 dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n",
  65                         addr, ((u8 *)buf)[0]);
  66         } else {
  67                 if (fixed)
  68                         ret = sdio_readsb(func, buf, addr, len);
  69                 else
  70                         ret = sdio_memcpy_fromio(func, buf, addr, len);
  71
  72                 dev_dbg(child->parent, "sdio read 53 addr 0x%x, %zu bytes\n",
  73                         addr, len);
  74         }
  75
  76         sdio_release_host(func);
  77
  78         if (WARN_ON(ret))
  79                 dev_err(child->parent, "sdio read failed (%d)\n", ret);
  80
  81         if (unlikely(dump)) {
  82                 printk(KERN_DEBUG "wlcore_sdio: READ from 0x%04x\n", addr);
  83                 print_hex_dump(KERN_DEBUG, "wlcore_sdio: READ ",
  84                                DUMP_PREFIX_OFFSET, 16, 1,
  85                                buf, len, false);
  86         }
  87
  88         return ret;
  89 }
  90
  91 static int __must_check wl12xx_sdio_raw_write(struct device *child, int addr,
  92                                               void *buf, size_t len, bool fixed)
  93 {
  94         int ret;
  95         struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
  96         struct sdio_func *func = dev_to_sdio_func(glue->dev);
  97
  98         sdio_claim_host(func);
  99
 100         if (unlikely(dump)) {
 101                 printk(KERN_DEBUG "wlcore_sdio: WRITE to 0x%04x\n", addr);
 102                 print_hex_dump(KERN_DEBUG, "wlcore_sdio: WRITE ",
 103                                 DUMP_PREFIX_OFFSET, 16, 1,
 104                                 buf, len, false);
 105         }
 106
 107         if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) {
 108                 sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret);
 109                 dev_dbg(child->parent, "sdio write 52 addr 0x%x, byte 0x%02x\n",
 110                         addr, ((u8 *)buf)[0]);
 111         } else {
 112                 dev_dbg(child->parent, "sdio write 53 addr 0x%x, %zu bytes\n",
 113                         addr, len);
 114
 115                 if (fixed)
 116                         ret = sdio_writesb(func, addr, buf, len);
 117                 else
 118                         ret = sdio_memcpy_toio(func, addr, buf, len);
 119         }
 120
 121         sdio_release_host(func);
 122
 123         if (WARN_ON(ret))
 124                 dev_err(child->parent, "sdio write failed (%d)\n", ret);
 125
 126         return ret;
 127 }
 128
 129 static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue)
 130 {
 131         int ret;
 132         struct sdio_func *func = dev_to_sdio_func(glue->dev);
 133         struct mmc_card *card = func->card;
 134
 135         ret = pm_runtime_get_sync(&card->dev);
 136         if (ret < 0) {
 137                 pm_runtime_put_noidle(&card->dev);
 138                 dev_err(glue->dev, "%s: failed to get_sync(%d)\n",
 139                         __func__, ret);
 140
 141                 return ret;
 142         }
 143
 144         sdio_claim_host(func);
 145         /*
 146          * To guarantee that the SDIO card is power cycled, as required to make
 147          * the FW programming to succeed, let's do a brute force HW reset.
 148          */
 149         mmc_hw_reset(card->host);
 150
 151         sdio_enable_func(func);
 152         sdio_release_host(func);
 153
 154         return 0;
 155 }
 156
 157 static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue)
 158 {
 159         struct sdio_func *func = dev_to_sdio_func(glue->dev);
 160         struct mmc_card *card = func->card;
 161
 162         sdio_claim_host(func);
 163         sdio_disable_func(func);
 164         sdio_release_host(func);
 165
 166         /* Let runtime PM know the card is powered off */
 167         pm_runtime_put(&card->dev);
 168         return 0;
 169 }
 170
 171 static int wl12xx_sdio_set_power(struct device *child, bool enable)
 172 {
 173         struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
 174
 175         if (enable)
 176                 return wl12xx_sdio_power_on(glue);
 177         else
 178                 return wl12xx_sdio_power_off(glue);
 179 }
 180
 181 static struct wl1271_if_operations sdio_ops = {
 182         .read           = wl12xx_sdio_raw_read,
 183         .write          = wl12xx_sdio_raw_write,
 184         .power          = wl12xx_sdio_set_power,
 185         .set_block_size = wl1271_sdio_set_block_size,
 186 };
 187
 188 #ifdef CONFIG_OF
 189
 190 static const struct wilink_family_data wl127x_data = {
 191         .name = "wl127x",
 192         .nvs_name = "ti-connectivity/wl127x-nvs.bin",
 193 };
 194
 195 static const struct wilink_family_data wl128x_data = {
 196         .name = "wl128x",
 197         .nvs_name = "ti-connectivity/wl128x-nvs.bin",
 198 };
 199
 200 static const struct wilink_family_data wl18xx_data = {
 201         .name = "wl18xx",
 202         .cfg_name = "ti-connectivity/wl18xx-conf.bin",
 203         .nvs_name = "ti-connectivity/wl1271-nvs.bin",
 204 };
 205
 206 static const struct of_device_id wlcore_sdio_of_match_table[] = {
 207         { .compatible = "ti,wl1271", .data = &wl127x_data },
 208         { .compatible = "ti,wl1273", .data = &wl127x_data },
 209         { .compatible = "ti,wl1281", .data = &wl128x_data },
 210         { .compatible = "ti,wl1283", .data = &wl128x_data },
 211         { .compatible = "ti,wl1285", .data = &wl128x_data },
 212         { .compatible = "ti,wl1801", .data = &wl18xx_data },
 213         { .compatible = "ti,wl1805", .data = &wl18xx_data },
 214         { .compatible = "ti,wl1807", .data = &wl18xx_data },
 215         { .compatible = "ti,wl1831", .data = &wl18xx_data },
 216         { .compatible = "ti,wl1835", .data = &wl18xx_data },
 217         { .compatible = "ti,wl1837", .data = &wl18xx_data },
 218         { }
 219 };
 220
 221 static int wlcore_probe_of(struct device *dev, int *irq, int *wakeirq,
 222                            struct wlcore_platdev_data *pdev_data)
 223 {
 224         struct device_node *np = dev->of_node;
 225         const struct of_device_id *of_id;
 226
 227         of_id = of_match_node(wlcore_sdio_of_match_table, np);
 228         if (!of_id)
 229                 return -ENODEV;
 230
 231         pdev_data->family = of_id->data;
 232
 233         *irq = irq_of_parse_and_map(np, 0);
 234         if (!*irq) {
 235                 dev_err(dev, "No irq in platform data\n");
 236                 return -EINVAL;
 237         }
 238
 239         *wakeirq = irq_of_parse_and_map(np, 1);
 240
 241         /* optional clock frequency params */
 242         of_property_read_u32(np, "ref-clock-frequency",
 243                              &pdev_data->ref_clock_freq);
 244         of_property_read_u32(np, "tcxo-clock-frequency",
 245                              &pdev_data->tcxo_clock_freq);
 246
 247         return 0;
 248 }
 249 #else
 250 static int wlcore_probe_of(struct device *dev, int *irq, int *wakeirq,
 251                            struct wlcore_platdev_data *pdev_data)
 252 {
 253         return -ENODATA;
 254 }
 255 #endif
 256
 257 static int wl1271_probe(struct sdio_func *func,
 258                                   const struct sdio_device_id *id)
 259 {
 260         struct wlcore_platdev_data *pdev_data;
 261         struct wl12xx_sdio_glue *glue;
 262         struct resource res[2];
 263         mmc_pm_flag_t mmcflags;
 264         int ret = -ENOMEM;
 265         int irq, wakeirq, num_irqs;
 266         const char *chip_family;
 267
 268         /* We are only able to handle the wlan function */
 269         if (func->num != 0x02)
 270                 return -ENODEV;
 271
 272         pdev_data = devm_kzalloc(&func->dev, sizeof(*pdev_data), GFP_KERNEL);
 273         if (!pdev_data)
 274                 return -ENOMEM;
 275
 276         pdev_data->if_ops = &sdio_ops;
 277
 278         glue = devm_kzalloc(&func->dev, sizeof(*glue), GFP_KERNEL);
 279         if (!glue)
 280                 return -ENOMEM;
 281
 282         glue->dev = &func->dev;
 283
 284         /* Grab access to FN0 for ELP reg. */
 285         func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
 286
 287         /* Use block mode for transferring over one block size of data */
 288         func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
 289
 290         ret = wlcore_probe_of(&func->dev, &irq, &wakeirq, pdev_data);
 291         if (ret)
 292                 goto out;
 293
 294         /* if sdio can keep power while host is suspended, enable wow */
 295         mmcflags = sdio_get_host_pm_caps(func);
 296         dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags);
 297
 298         if (mmcflags & MMC_PM_KEEP_POWER)
 299                 pdev_data->pwr_in_suspend = true;
 300
 301         sdio_set_drvdata(func, glue);
 302
 303         /* Tell PM core that we don't need the card to be powered now */
 304         pm_runtime_put_noidle(&func->dev);
 305
 306         /*
 307          * Due to a hardware bug, we can't differentiate wl18xx from
 308          * wl12xx, because both report the same device ID.  The only
 309          * way to differentiate is by checking the SDIO revision,
 310          * which is 3.00 on the wl18xx chips.
 311          */
 312         if (func->card->cccr.sdio_vsn == SDIO_SDIO_REV_3_00)
 313                 chip_family = "wl18xx";
 314         else
 315                 chip_family = "wl12xx";
 316
 317         glue->core = platform_device_alloc(chip_family, PLATFORM_DEVID_AUTO);
 318         if (!glue->core) {
 319                 dev_err(glue->dev, "can't allocate platform_device");
 320                 ret = -ENOMEM;
 321                 goto out;
 322         }
 323
 324         glue->core->dev.parent = &func->dev;
 325
 326         memset(res, 0x00, sizeof(res));
 327
 328         res[0].start = irq;
 329         res[0].flags = IORESOURCE_IRQ |
 330                        irqd_get_trigger_type(irq_get_irq_data(irq));
 331         res[0].name = "irq";
 332
 333
 334         if (wakeirq > 0) {
 335                 res[1].start = wakeirq;
 336                 res[1].flags = IORESOURCE_IRQ |
 337                                irqd_get_trigger_type(irq_get_irq_data(wakeirq));
 338                 res[1].name = "wakeirq";
 339                 num_irqs = 2;
 340         } else {
 341                 num_irqs = 1;
 342         }
 343         ret = platform_device_add_resources(glue->core, res, num_irqs);
 344         if (ret) {
 345                 dev_err(glue->dev, "can't add resources\n");
 346                 goto out_dev_put;
 347         }
 348
 349         ret = platform_device_add_data(glue->core, pdev_data,
 350                                        sizeof(*pdev_data));
 351         if (ret) {
 352                 dev_err(glue->dev, "can't add platform data\n");
 353                 goto out_dev_put;
 354         }
 355
 356         ret = platform_device_add(glue->core);
 357         if (ret) {
 358                 dev_err(glue->dev, "can't add platform device\n");
 359                 goto out_dev_put;
 360         }
 361         return 0;
 362
 363 out_dev_put:
 364         platform_device_put(glue->core);
 365
 366 out:
 367         return ret;
 368 }
 369
 370 static void wl1271_remove(struct sdio_func *func)
 371 {
 372         struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
 373
 374         /* Undo decrement done above in wl1271_probe */
 375         pm_runtime_get_noresume(&func->dev);
 376
 377         platform_device_unregister(glue->core);
 378 }
 379
 380 #ifdef CONFIG_PM
 381 static int wl1271_suspend(struct device *dev)
 382 {
 383         /* Tell MMC/SDIO core it's OK to power down the card
 384          * (if it isn't already), but not to remove it completely */
 385         struct sdio_func *func = dev_to_sdio_func(dev);
 386         struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
 387         struct wl1271 *wl = platform_get_drvdata(glue->core);
 388         mmc_pm_flag_t sdio_flags;
 389         int ret = 0;
 390
 391         if (!wl) {
 392                 dev_err(dev, "no wilink module was probed\n");
 393                 goto out;
 394         }
 395
 396         dev_dbg(dev, "wl1271 suspend. wow_enabled: %d\n",
 397                 wl->wow_enabled);
 398
 399         /* check whether sdio should keep power */
 400         if (wl->wow_enabled) {
 401                 sdio_flags = sdio_get_host_pm_caps(func);
 402
 403                 if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
 404                         dev_err(dev, "can't keep power while host "
 405                                      "is suspended\n");
 406                         ret = -EINVAL;
 407                         goto out;
 408                 }
 409
 410                 /* keep power while host suspended */
 411                 ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
 412                 if (ret) {
 413                         dev_err(dev, "error while trying to keep power\n");
 414                         goto out;
 415                 }
 416         }
 417 out:
 418         return ret;
 419 }
 420
 421 static int wl1271_resume(struct device *dev)
 422 {
 423         dev_dbg(dev, "wl1271 resume\n");
 424
 425         return 0;
 426 }
 427
 428 static const struct dev_pm_ops wl1271_sdio_pm_ops = {
 429         .suspend        = wl1271_suspend,
 430         .resume         = wl1271_resume,
 431 };
 432 #endif
 433
 434 static struct sdio_driver wl1271_sdio_driver = {
 435         .name           = "wl1271_sdio",
 436         .id_table       = wl1271_devices,
 437         .probe          = wl1271_probe,
 438         .remove         = wl1271_remove,
 439 #ifdef CONFIG_PM
 440         .drv = {
 441                 .pm = &wl1271_sdio_pm_ops,
 442         },
 443 #endif
 444 };
 445
 446 static int __init wl1271_init(void)
 447 {
 448         return sdio_register_driver(&wl1271_sdio_driver);
 449 }
 450
 451 static void __exit wl1271_exit(void)
 452 {
 453         sdio_unregister_driver(&wl1271_sdio_driver);
 454 }
 455
 456 module_init(wl1271_init);
 457 module_exit(wl1271_exit);
 458
 459 module_param(dump, bool, 0600);
 460 MODULE_PARM_DESC(dump, "Enable sdio read/write dumps.");
 461
 462 MODULE_LICENSE("GPL");
 463 MODULE_AUTHOR("Luciano Coelho <[email protected]>");
 464 MODULE_AUTHOR("Juuso Oikarinen <[email protected]>");