]> Git Repo - linux.git/blob - drivers/iio/light/st_uvis25_core.c
drm/nouveau/kms: Don't change EDID when it hasn't actually changed
[linux.git] / drivers / iio / light / st_uvis25_core.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * STMicroelectronics uvis25 sensor driver
4  *
5  * Copyright 2017 STMicroelectronics Inc.
6  *
7  * Lorenzo Bianconi <[email protected]>
8  */
9
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/device.h>
13 #include <linux/iio/sysfs.h>
14 #include <linux/delay.h>
15 #include <linux/pm.h>
16 #include <linux/interrupt.h>
17 #include <linux/irqreturn.h>
18 #include <linux/iio/trigger.h>
19 #include <linux/iio/trigger_consumer.h>
20 #include <linux/iio/triggered_buffer.h>
21 #include <linux/iio/buffer.h>
22 #include <linux/regmap.h>
23
24 #include "st_uvis25.h"
25
26 #define ST_UVIS25_REG_WHOAMI_ADDR       0x0f
27 #define ST_UVIS25_REG_WHOAMI_VAL        0xca
28 #define ST_UVIS25_REG_CTRL1_ADDR        0x20
29 #define ST_UVIS25_REG_ODR_MASK          BIT(0)
30 #define ST_UVIS25_REG_BDU_MASK          BIT(1)
31 #define ST_UVIS25_REG_CTRL2_ADDR        0x21
32 #define ST_UVIS25_REG_BOOT_MASK         BIT(7)
33 #define ST_UVIS25_REG_CTRL3_ADDR        0x22
34 #define ST_UVIS25_REG_HL_MASK           BIT(7)
35 #define ST_UVIS25_REG_STATUS_ADDR       0x27
36 #define ST_UVIS25_REG_UV_DA_MASK        BIT(0)
37 #define ST_UVIS25_REG_OUT_ADDR          0x28
38
39 static const struct iio_chan_spec st_uvis25_channels[] = {
40         {
41                 .type = IIO_UVINDEX,
42                 .address = ST_UVIS25_REG_OUT_ADDR,
43                 .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
44                 .scan_index = 0,
45                 .scan_type = {
46                         .sign = 'u',
47                         .realbits = 8,
48                         .storagebits = 8,
49                 },
50         },
51         IIO_CHAN_SOFT_TIMESTAMP(1),
52 };
53
54 static int st_uvis25_check_whoami(struct st_uvis25_hw *hw)
55 {
56         int err, data;
57
58         err = regmap_read(hw->regmap, ST_UVIS25_REG_WHOAMI_ADDR, &data);
59         if (err < 0) {
60                 dev_err(regmap_get_device(hw->regmap),
61                         "failed to read whoami register\n");
62                 return err;
63         }
64
65         if (data != ST_UVIS25_REG_WHOAMI_VAL) {
66                 dev_err(regmap_get_device(hw->regmap),
67                         "wrong whoami {%02x vs %02x}\n",
68                         data, ST_UVIS25_REG_WHOAMI_VAL);
69                 return -ENODEV;
70         }
71
72         return 0;
73 }
74
75 static int st_uvis25_set_enable(struct st_uvis25_hw *hw, bool enable)
76 {
77         int err;
78
79         err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR,
80                                  ST_UVIS25_REG_ODR_MASK, enable);
81         if (err < 0)
82                 return err;
83
84         hw->enabled = enable;
85
86         return 0;
87 }
88
89 static int st_uvis25_read_oneshot(struct st_uvis25_hw *hw, u8 addr, int *val)
90 {
91         int err;
92
93         err = st_uvis25_set_enable(hw, true);
94         if (err < 0)
95                 return err;
96
97         msleep(1500);
98
99         /*
100          * in order to avoid possible race conditions with interrupt
101          * generation, disable the sensor first and then poll output
102          * register. That sequence guarantees the interrupt will be reset
103          * when irq line is unmasked
104          */
105         err = st_uvis25_set_enable(hw, false);
106         if (err < 0)
107                 return err;
108
109         err = regmap_read(hw->regmap, addr, val);
110
111         return err < 0 ? err : IIO_VAL_INT;
112 }
113
114 static int st_uvis25_read_raw(struct iio_dev *iio_dev,
115                               struct iio_chan_spec const *ch,
116                               int *val, int *val2, long mask)
117 {
118         int ret;
119
120         ret = iio_device_claim_direct_mode(iio_dev);
121         if (ret)
122                 return ret;
123
124         switch (mask) {
125         case IIO_CHAN_INFO_PROCESSED: {
126                 struct st_uvis25_hw *hw = iio_priv(iio_dev);
127
128                 /*
129                  * mask irq line during oneshot read since the sensor
130                  * does not export the capability to disable data-ready line
131                  * in the register map and it is enabled by default.
132                  * If the line is unmasked during read_raw() it will be set
133                  * active and never reset since the trigger is disabled
134                  */
135                 if (hw->irq > 0)
136                         disable_irq(hw->irq);
137                 ret = st_uvis25_read_oneshot(hw, ch->address, val);
138                 if (hw->irq > 0)
139                         enable_irq(hw->irq);
140                 break;
141         }
142         default:
143                 ret = -EINVAL;
144                 break;
145         }
146
147         iio_device_release_direct_mode(iio_dev);
148
149         return ret;
150 }
151
152 static irqreturn_t st_uvis25_trigger_handler_thread(int irq, void *private)
153 {
154         struct st_uvis25_hw *hw = private;
155         int err, status;
156
157         err = regmap_read(hw->regmap, ST_UVIS25_REG_STATUS_ADDR, &status);
158         if (err < 0)
159                 return IRQ_HANDLED;
160
161         if (!(status & ST_UVIS25_REG_UV_DA_MASK))
162                 return IRQ_NONE;
163
164         iio_trigger_poll_chained(hw->trig);
165
166         return IRQ_HANDLED;
167 }
168
169 static int st_uvis25_allocate_trigger(struct iio_dev *iio_dev)
170 {
171         struct st_uvis25_hw *hw = iio_priv(iio_dev);
172         struct device *dev = regmap_get_device(hw->regmap);
173         bool irq_active_low = false;
174         unsigned long irq_type;
175         int err;
176
177         irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
178
179         switch (irq_type) {
180         case IRQF_TRIGGER_HIGH:
181         case IRQF_TRIGGER_RISING:
182                 break;
183         case IRQF_TRIGGER_LOW:
184         case IRQF_TRIGGER_FALLING:
185                 irq_active_low = true;
186                 break;
187         default:
188                 dev_info(dev, "mode %lx unsupported\n", irq_type);
189                 return -EINVAL;
190         }
191
192         err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL3_ADDR,
193                                  ST_UVIS25_REG_HL_MASK, irq_active_low);
194         if (err < 0)
195                 return err;
196
197         err = devm_request_threaded_irq(dev, hw->irq, NULL,
198                                         st_uvis25_trigger_handler_thread,
199                                         irq_type | IRQF_ONESHOT,
200                                         iio_dev->name, hw);
201         if (err) {
202                 dev_err(dev, "failed to request trigger irq %d\n",
203                         hw->irq);
204                 return err;
205         }
206
207         hw->trig = devm_iio_trigger_alloc(dev, "%s-trigger",
208                                           iio_dev->name);
209         if (!hw->trig)
210                 return -ENOMEM;
211
212         iio_trigger_set_drvdata(hw->trig, iio_dev);
213         hw->trig->dev.parent = dev;
214
215         return devm_iio_trigger_register(dev, hw->trig);
216 }
217
218 static int st_uvis25_buffer_preenable(struct iio_dev *iio_dev)
219 {
220         return st_uvis25_set_enable(iio_priv(iio_dev), true);
221 }
222
223 static int st_uvis25_buffer_postdisable(struct iio_dev *iio_dev)
224 {
225         return st_uvis25_set_enable(iio_priv(iio_dev), false);
226 }
227
228 static const struct iio_buffer_setup_ops st_uvis25_buffer_ops = {
229         .preenable = st_uvis25_buffer_preenable,
230         .postdisable = st_uvis25_buffer_postdisable,
231 };
232
233 static irqreturn_t st_uvis25_buffer_handler_thread(int irq, void *p)
234 {
235         u8 buffer[ALIGN(sizeof(u8), sizeof(s64)) + sizeof(s64)];
236         struct iio_poll_func *pf = p;
237         struct iio_dev *iio_dev = pf->indio_dev;
238         struct st_uvis25_hw *hw = iio_priv(iio_dev);
239         int err;
240
241         err = regmap_read(hw->regmap, ST_UVIS25_REG_OUT_ADDR, (int *)buffer);
242         if (err < 0)
243                 goto out;
244
245         iio_push_to_buffers_with_timestamp(iio_dev, buffer,
246                                            iio_get_time_ns(iio_dev));
247
248 out:
249         iio_trigger_notify_done(hw->trig);
250
251         return IRQ_HANDLED;
252 }
253
254 static int st_uvis25_allocate_buffer(struct iio_dev *iio_dev)
255 {
256         struct st_uvis25_hw *hw = iio_priv(iio_dev);
257
258         return devm_iio_triggered_buffer_setup(regmap_get_device(hw->regmap),
259                                                iio_dev, NULL,
260                                                st_uvis25_buffer_handler_thread,
261                                                &st_uvis25_buffer_ops);
262 }
263
264 static const struct iio_info st_uvis25_info = {
265         .read_raw = st_uvis25_read_raw,
266 };
267
268 static int st_uvis25_init_sensor(struct st_uvis25_hw *hw)
269 {
270         int err;
271
272         err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL2_ADDR,
273                                  ST_UVIS25_REG_BOOT_MASK, 1);
274         if (err < 0)
275                 return err;
276
277         msleep(2000);
278
279         return regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR,
280                                   ST_UVIS25_REG_BDU_MASK, 1);
281 }
282
283 int st_uvis25_probe(struct device *dev, int irq, struct regmap *regmap)
284 {
285         struct st_uvis25_hw *hw;
286         struct iio_dev *iio_dev;
287         int err;
288
289         iio_dev = devm_iio_device_alloc(dev, sizeof(*hw));
290         if (!iio_dev)
291                 return -ENOMEM;
292
293         dev_set_drvdata(dev, (void *)iio_dev);
294
295         hw = iio_priv(iio_dev);
296         hw->irq = irq;
297         hw->regmap = regmap;
298
299         err = st_uvis25_check_whoami(hw);
300         if (err < 0)
301                 return err;
302
303         iio_dev->modes = INDIO_DIRECT_MODE;
304         iio_dev->channels = st_uvis25_channels;
305         iio_dev->num_channels = ARRAY_SIZE(st_uvis25_channels);
306         iio_dev->name = ST_UVIS25_DEV_NAME;
307         iio_dev->info = &st_uvis25_info;
308
309         err = st_uvis25_init_sensor(hw);
310         if (err < 0)
311                 return err;
312
313         if (hw->irq > 0) {
314                 err = st_uvis25_allocate_buffer(iio_dev);
315                 if (err < 0)
316                         return err;
317
318                 err = st_uvis25_allocate_trigger(iio_dev);
319                 if (err)
320                         return err;
321         }
322
323         return devm_iio_device_register(dev, iio_dev);
324 }
325 EXPORT_SYMBOL(st_uvis25_probe);
326
327 static int __maybe_unused st_uvis25_suspend(struct device *dev)
328 {
329         struct iio_dev *iio_dev = dev_get_drvdata(dev);
330         struct st_uvis25_hw *hw = iio_priv(iio_dev);
331
332         return regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR,
333                                   ST_UVIS25_REG_ODR_MASK, 0);
334 }
335
336 static int __maybe_unused st_uvis25_resume(struct device *dev)
337 {
338         struct iio_dev *iio_dev = dev_get_drvdata(dev);
339         struct st_uvis25_hw *hw = iio_priv(iio_dev);
340
341         if (hw->enabled)
342                 return regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR,
343                                           ST_UVIS25_REG_ODR_MASK, 1);
344
345         return 0;
346 }
347
348 const struct dev_pm_ops st_uvis25_pm_ops = {
349         SET_SYSTEM_SLEEP_PM_OPS(st_uvis25_suspend, st_uvis25_resume)
350 };
351 EXPORT_SYMBOL(st_uvis25_pm_ops);
352
353 MODULE_AUTHOR("Lorenzo Bianconi <[email protected]>");
354 MODULE_DESCRIPTION("STMicroelectronics uvis25 sensor driver");
355 MODULE_LICENSE("GPL v2");
This page took 0.051412 seconds and 4 git commands to generate.