drivers/net/usb/asix_devices.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * ASIX AX8817X based USB 2.0 Ethernet Devices
   4  * Copyright (C) 2003-2006 David Hollis <[email protected]>
   5  * Copyright (C) 2005 Phil Chang <[email protected]>
   6  * Copyright (C) 2006 James Painter <[email protected]>
   7  * Copyright (c) 2002-2003 TiVo Inc.
   8  */
   9
  10 #include "asix.h"
  11
  12 #define PHY_MODE_MARVELL        0x0000
  13 #define MII_MARVELL_LED_CTRL    0x0018
  14 #define MII_MARVELL_STATUS      0x001b
  15 #define MII_MARVELL_CTRL        0x0014
  16
  17 #define MARVELL_LED_MANUAL      0x0019
  18
  19 #define MARVELL_STATUS_HWCFG    0x0004
  20
  21 #define MARVELL_CTRL_TXDELAY    0x0002
  22 #define MARVELL_CTRL_RXDELAY    0x0080
  23
  24 #define PHY_MODE_RTL8211CL      0x000C
  25
  26 #define AX88772A_PHY14H         0x14
  27 #define AX88772A_PHY14H_DEFAULT 0x442C
  28
  29 #define AX88772A_PHY15H         0x15
  30 #define AX88772A_PHY15H_DEFAULT 0x03C8
  31
  32 #define AX88772A_PHY16H         0x16
  33 #define AX88772A_PHY16H_DEFAULT 0x4044
  34
  35 struct ax88172_int_data {
  36         __le16 res1;
  37         u8 link;
  38         __le16 res2;
  39         u8 status;
  40         __le16 res3;
  41 } __packed;
  42
  43 static void asix_status(struct usbnet *dev, struct urb *urb)
  44 {
  45         struct ax88172_int_data *event;
  46         int link;
  47
  48         if (urb->actual_length < 8)
  49                 return;
  50
  51         event = urb->transfer_buffer;
  52         link = event->link & 0x01;
  53         if (netif_carrier_ok(dev->net) != link) {
  54                 usbnet_link_change(dev, link, 1);
  55                 netdev_dbg(dev->net, "Link Status is: %d\n", link);
  56         }
  57 }
  58
  59 static void asix_set_netdev_dev_addr(struct usbnet *dev, u8 *addr)
  60 {
  61         if (is_valid_ether_addr(addr)) {
  62                 eth_hw_addr_set(dev->net, addr);
  63         } else {
  64                 netdev_info(dev->net, "invalid hw address, using random\n");
  65                 eth_hw_addr_random(dev->net);
  66         }
  67 }
  68
  69 /* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
  70 static u32 asix_get_phyid(struct usbnet *dev)
  71 {
  72         int phy_reg;
  73         u32 phy_id;
  74         int i;
  75
  76         /* Poll for the rare case the FW or phy isn't ready yet.  */
  77         for (i = 0; i < 100; i++) {
  78                 phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
  79                 if (phy_reg < 0)
  80                         return 0;
  81                 if (phy_reg != 0 && phy_reg != 0xFFFF)
  82                         break;
  83                 mdelay(1);
  84         }
  85
  86         if (phy_reg <= 0 || phy_reg == 0xFFFF)
  87                 return 0;
  88
  89         phy_id = (phy_reg & 0xffff) << 16;
  90
  91         phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
  92         if (phy_reg < 0)
  93                 return 0;
  94
  95         phy_id |= (phy_reg & 0xffff);
  96
  97         return phy_id;
  98 }
  99
 100 static u32 asix_get_link(struct net_device *net)
 101 {
 102         struct usbnet *dev = netdev_priv(net);
 103
 104         return mii_link_ok(&dev->mii);
 105 }
 106
 107 static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
 108 {
 109         struct usbnet *dev = netdev_priv(net);
 110
 111         return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
 112 }
 113
 114 /* We need to override some ethtool_ops so we require our
 115    own structure so we don't interfere with other usbnet
 116    devices that may be connected at the same time. */
 117 static const struct ethtool_ops ax88172_ethtool_ops = {
 118         .get_drvinfo            = asix_get_drvinfo,
 119         .get_link               = asix_get_link,
 120         .get_msglevel           = usbnet_get_msglevel,
 121         .set_msglevel           = usbnet_set_msglevel,
 122         .get_wol                = asix_get_wol,
 123         .set_wol                = asix_set_wol,
 124         .get_eeprom_len         = asix_get_eeprom_len,
 125         .get_eeprom             = asix_get_eeprom,
 126         .set_eeprom             = asix_set_eeprom,
 127         .nway_reset             = usbnet_nway_reset,
 128         .get_link_ksettings     = usbnet_get_link_ksettings_mii,
 129         .set_link_ksettings     = usbnet_set_link_ksettings_mii,
 130 };
 131
 132 static void ax88172_set_multicast(struct net_device *net)
 133 {
 134         struct usbnet *dev = netdev_priv(net);
 135         struct asix_data *data = (struct asix_data *)&dev->data;
 136         u8 rx_ctl = 0x8c;
 137
 138         if (net->flags & IFF_PROMISC) {
 139                 rx_ctl |= 0x01;
 140         } else if (net->flags & IFF_ALLMULTI ||
 141                    netdev_mc_count(net) > AX_MAX_MCAST) {
 142                 rx_ctl |= 0x02;
 143         } else if (netdev_mc_empty(net)) {
 144                 /* just broadcast and directed */
 145         } else {
 146                 /* We use the 20 byte dev->data
 147                  * for our 8 byte filter buffer
 148                  * to avoid allocating memory that
 149                  * is tricky to free later */
 150                 struct netdev_hw_addr *ha;
 151                 u32 crc_bits;
 152
 153                 memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
 154
 155                 /* Build the multicast hash filter. */
 156                 netdev_for_each_mc_addr(ha, net) {
 157                         crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
 158                         data->multi_filter[crc_bits >> 3] |=
 159                             1 << (crc_bits & 7);
 160                 }
 161
 162                 asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
 163                                    AX_MCAST_FILTER_SIZE, data->multi_filter);
 164
 165                 rx_ctl |= 0x10;
 166         }
 167
 168         asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
 169 }
 170
 171 static int ax88172_link_reset(struct usbnet *dev)
 172 {
 173         u8 mode;
 174         struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
 175
 176         mii_check_media(&dev->mii, 1, 1);
 177         mii_ethtool_gset(&dev->mii, &ecmd);
 178         mode = AX88172_MEDIUM_DEFAULT;
 179
 180         if (ecmd.duplex != DUPLEX_FULL)
 181                 mode |= ~AX88172_MEDIUM_FD;
 182
 183         netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
 184                    ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
 185
 186         asix_write_medium_mode(dev, mode, 0);
 187
 188         return 0;
 189 }
 190
 191 static const struct net_device_ops ax88172_netdev_ops = {
 192         .ndo_open               = usbnet_open,
 193         .ndo_stop               = usbnet_stop,
 194         .ndo_start_xmit         = usbnet_start_xmit,
 195         .ndo_tx_timeout         = usbnet_tx_timeout,
 196         .ndo_change_mtu         = usbnet_change_mtu,
 197         .ndo_get_stats64        = dev_get_tstats64,
 198         .ndo_set_mac_address    = eth_mac_addr,
 199         .ndo_validate_addr      = eth_validate_addr,
 200         .ndo_eth_ioctl          = asix_ioctl,
 201         .ndo_set_rx_mode        = ax88172_set_multicast,
 202 };
 203
 204 static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
 205 {
 206         unsigned int timeout = 5000;
 207
 208         asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits);
 209
 210         /* give phy_id a chance to process reset */
 211         udelay(500);
 212
 213         /* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */
 214         while (timeout--) {
 215                 if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR)
 216                                                         & BMCR_RESET)
 217                         udelay(100);
 218                 else
 219                         return;
 220         }
 221
 222         netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n",
 223                    dev->mii.phy_id);
 224 }
 225
 226 static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 227 {
 228         int ret = 0;
 229         u8 buf[ETH_ALEN] = {0};
 230         int i;
 231         unsigned long gpio_bits = dev->driver_info->data;
 232
 233         usbnet_get_endpoints(dev,intf);
 234
 235         /* Toggle the GPIOs in a manufacturer/model specific way */
 236         for (i = 2; i >= 0; i--) {
 237                 ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
 238                                 (gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL, 0);
 239                 if (ret < 0)
 240                         goto out;
 241                 msleep(5);
 242         }
 243
 244         ret = asix_write_rx_ctl(dev, 0x80, 0);
 245         if (ret < 0)
 246                 goto out;
 247
 248         /* Get the MAC address */
 249         ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
 250                             0, 0, ETH_ALEN, buf, 0);
 251         if (ret < 0) {
 252                 netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
 253                            ret);
 254                 goto out;
 255         }
 256
 257         asix_set_netdev_dev_addr(dev, buf);
 258
 259         /* Initialize MII structure */
 260         dev->mii.dev = dev->net;
 261         dev->mii.mdio_read = asix_mdio_read;
 262         dev->mii.mdio_write = asix_mdio_write;
 263         dev->mii.phy_id_mask = 0x3f;
 264         dev->mii.reg_num_mask = 0x1f;
 265
 266         dev->mii.phy_id = asix_read_phy_addr(dev, true);
 267         if (dev->mii.phy_id < 0)
 268                 return dev->mii.phy_id;
 269
 270         dev->net->netdev_ops = &ax88172_netdev_ops;
 271         dev->net->ethtool_ops = &ax88172_ethtool_ops;
 272         dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 273         dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 274
 275         asix_phy_reset(dev, BMCR_RESET);
 276         asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 277                 ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 278         mii_nway_restart(&dev->mii);
 279
 280         return 0;
 281
 282 out:
 283         return ret;
 284 }
 285
 286 static void ax88772_ethtool_get_strings(struct net_device *netdev, u32 sset,
 287                                         u8 *data)
 288 {
 289         switch (sset) {
 290         case ETH_SS_TEST:
 291                 net_selftest_get_strings(data);
 292                 break;
 293         }
 294 }
 295
 296 static int ax88772_ethtool_get_sset_count(struct net_device *ndev, int sset)
 297 {
 298         switch (sset) {
 299         case ETH_SS_TEST:
 300                 return net_selftest_get_count();
 301         default:
 302                 return -EOPNOTSUPP;
 303         }
 304 }
 305
 306 static const struct ethtool_ops ax88772_ethtool_ops = {
 307         .get_drvinfo            = asix_get_drvinfo,
 308         .get_link               = usbnet_get_link,
 309         .get_msglevel           = usbnet_get_msglevel,
 310         .set_msglevel           = usbnet_set_msglevel,
 311         .get_wol                = asix_get_wol,
 312         .set_wol                = asix_set_wol,
 313         .get_eeprom_len         = asix_get_eeprom_len,
 314         .get_eeprom             = asix_get_eeprom,
 315         .set_eeprom             = asix_set_eeprom,
 316         .nway_reset             = phy_ethtool_nway_reset,
 317         .get_link_ksettings     = phy_ethtool_get_link_ksettings,
 318         .set_link_ksettings     = phy_ethtool_set_link_ksettings,
 319         .self_test              = net_selftest,
 320         .get_strings            = ax88772_ethtool_get_strings,
 321         .get_sset_count         = ax88772_ethtool_get_sset_count,
 322 };
 323
 324 static int ax88772_reset(struct usbnet *dev)
 325 {
 326         struct asix_data *data = (struct asix_data *)&dev->data;
 327         struct asix_common_private *priv = dev->driver_priv;
 328         int ret;
 329
 330         /* Rewrite MAC address */
 331         ether_addr_copy(data->mac_addr, dev->net->dev_addr);
 332         ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
 333                              ETH_ALEN, data->mac_addr, 0);
 334         if (ret < 0)
 335                 goto out;
 336
 337         /* Set RX_CTL to default values with 2k buffer, and enable cactus */
 338         ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
 339         if (ret < 0)
 340                 goto out;
 341
 342         ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, 0);
 343         if (ret < 0)
 344                 goto out;
 345
 346         phy_start(priv->phydev);
 347
 348         return 0;
 349
 350 out:
 351         return ret;
 352 }
 353
 354 static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
 355 {
 356         struct asix_data *data = (struct asix_data *)&dev->data;
 357         struct asix_common_private *priv = dev->driver_priv;
 358         u16 rx_ctl;
 359         int ret;
 360
 361         ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
 362                               AX_GPIO_GPO2EN, 5, in_pm);
 363         if (ret < 0)
 364                 goto out;
 365
 366         ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, priv->embd_phy,
 367                              0, 0, NULL, in_pm);
 368         if (ret < 0) {
 369                 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
 370                 goto out;
 371         }
 372
 373         if (priv->embd_phy) {
 374                 ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
 375                 if (ret < 0)
 376                         goto out;
 377
 378                 usleep_range(10000, 11000);
 379
 380                 ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
 381                 if (ret < 0)
 382                         goto out;
 383
 384                 msleep(60);
 385
 386                 ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL,
 387                                     in_pm);
 388                 if (ret < 0)
 389                         goto out;
 390         } else {
 391                 ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL,
 392                                     in_pm);
 393                 if (ret < 0)
 394                         goto out;
 395         }
 396
 397         msleep(150);
 398
 399         if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
 400                                            MII_PHYSID1))){
 401                 ret = -EIO;
 402                 goto out;
 403         }
 404
 405         ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 406         if (ret < 0)
 407                 goto out;
 408
 409         ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
 410         if (ret < 0)
 411                 goto out;
 412
 413         ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 414                              AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
 415                              AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
 416         if (ret < 0) {
 417                 netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
 418                 goto out;
 419         }
 420
 421         /* Rewrite MAC address */
 422         ether_addr_copy(data->mac_addr, dev->net->dev_addr);
 423         ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
 424                              ETH_ALEN, data->mac_addr, in_pm);
 425         if (ret < 0)
 426                 goto out;
 427
 428         /* Set RX_CTL to default values with 2k buffer, and enable cactus */
 429         ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 430         if (ret < 0)
 431                 goto out;
 432
 433         rx_ctl = asix_read_rx_ctl(dev, in_pm);
 434         netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
 435                    rx_ctl);
 436
 437         rx_ctl = asix_read_medium_status(dev, in_pm);
 438         netdev_dbg(dev->net,
 439                    "Medium Status is 0x%04x after all initializations\n",
 440                    rx_ctl);
 441
 442         return 0;
 443
 444 out:
 445         return ret;
 446 }
 447
 448 static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 449 {
 450         struct asix_data *data = (struct asix_data *)&dev->data;
 451         struct asix_common_private *priv = dev->driver_priv;
 452         u16 rx_ctl, phy14h, phy15h, phy16h;
 453         int ret;
 454
 455         ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
 456         if (ret < 0)
 457                 goto out;
 458
 459         ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, priv->embd_phy |
 460                              AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
 461         if (ret < 0) {
 462                 netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
 463                 goto out;
 464         }
 465         usleep_range(10000, 11000);
 466
 467         ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_IPRL, in_pm);
 468         if (ret < 0)
 469                 goto out;
 470
 471         usleep_range(10000, 11000);
 472
 473         ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
 474         if (ret < 0)
 475                 goto out;
 476
 477         msleep(160);
 478
 479         ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
 480         if (ret < 0)
 481                 goto out;
 482
 483         ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
 484         if (ret < 0)
 485                 goto out;
 486
 487         msleep(200);
 488
 489         if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
 490                                            MII_PHYSID1))) {
 491                 ret = -1;
 492                 goto out;
 493         }
 494
 495         if (priv->chipcode == AX_AX88772B_CHIPCODE) {
 496                 ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001,
 497                                      0, NULL, in_pm);
 498                 if (ret < 0) {
 499                         netdev_dbg(dev->net, "Write BQ setting failed: %d\n",
 500                                    ret);
 501                         goto out;
 502                 }
 503         } else if (priv->chipcode == AX_AX88772A_CHIPCODE) {
 504                 /* Check if the PHY registers have default settings */
 505                 phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
 506                                              AX88772A_PHY14H);
 507                 phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
 508                                              AX88772A_PHY15H);
 509                 phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
 510                                              AX88772A_PHY16H);
 511
 512                 netdev_dbg(dev->net,
 513                            "772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
 514                            phy14h, phy15h, phy16h);
 515
 516                 /* Restore PHY registers default setting if not */
 517                 if (phy14h != AX88772A_PHY14H_DEFAULT)
 518                         asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
 519                                              AX88772A_PHY14H,
 520                                              AX88772A_PHY14H_DEFAULT);
 521                 if (phy15h != AX88772A_PHY15H_DEFAULT)
 522                         asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
 523                                              AX88772A_PHY15H,
 524                                              AX88772A_PHY15H_DEFAULT);
 525                 if (phy16h != AX88772A_PHY16H_DEFAULT)
 526                         asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
 527                                              AX88772A_PHY16H,
 528                                              AX88772A_PHY16H_DEFAULT);
 529         }
 530
 531         ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 532                                 AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
 533                                 AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
 534         if (ret < 0) {
 535                 netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
 536                 goto out;
 537         }
 538
 539         /* Rewrite MAC address */
 540         memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 541         ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
 542                                                         data->mac_addr, in_pm);
 543         if (ret < 0)
 544                 goto out;
 545
 546         /* Set RX_CTL to default values with 2k buffer, and enable cactus */
 547         ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 548         if (ret < 0)
 549                 goto out;
 550
 551         ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
 552         if (ret < 0)
 553                 return ret;
 554
 555         /* Set RX_CTL to default values with 2k buffer, and enable cactus */
 556         ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
 557         if (ret < 0)
 558                 goto out;
 559
 560         rx_ctl = asix_read_rx_ctl(dev, in_pm);
 561         netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
 562                    rx_ctl);
 563
 564         rx_ctl = asix_read_medium_status(dev, in_pm);
 565         netdev_dbg(dev->net,
 566                    "Medium Status is 0x%04x after all initializations\n",
 567                    rx_ctl);
 568
 569         return 0;
 570
 571 out:
 572         return ret;
 573 }
 574
 575 static const struct net_device_ops ax88772_netdev_ops = {
 576         .ndo_open               = usbnet_open,
 577         .ndo_stop               = usbnet_stop,
 578         .ndo_start_xmit         = usbnet_start_xmit,
 579         .ndo_tx_timeout         = usbnet_tx_timeout,
 580         .ndo_change_mtu         = usbnet_change_mtu,
 581         .ndo_get_stats64        = dev_get_tstats64,
 582         .ndo_set_mac_address    = asix_set_mac_address,
 583         .ndo_validate_addr      = eth_validate_addr,
 584         .ndo_eth_ioctl          = phy_do_ioctl_running,
 585         .ndo_set_rx_mode        = asix_set_multicast,
 586 };
 587
 588 static void ax88772_suspend(struct usbnet *dev)
 589 {
 590         struct asix_common_private *priv = dev->driver_priv;
 591         u16 medium;
 592
 593         if (netif_running(dev->net))
 594                 phy_stop(priv->phydev);
 595
 596         /* Stop MAC operation */
 597         medium = asix_read_medium_status(dev, 1);
 598         medium &= ~AX_MEDIUM_RE;
 599         asix_write_medium_mode(dev, medium, 1);
 600
 601         netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
 602                    asix_read_medium_status(dev, 1));
 603 }
 604
 605 static int asix_suspend(struct usb_interface *intf, pm_message_t message)
 606 {
 607         struct usbnet *dev = usb_get_intfdata(intf);
 608         struct asix_common_private *priv = dev->driver_priv;
 609
 610         if (priv && priv->suspend)
 611                 priv->suspend(dev);
 612
 613         return usbnet_suspend(intf, message);
 614 }
 615
 616 static void ax88772_resume(struct usbnet *dev)
 617 {
 618         struct asix_common_private *priv = dev->driver_priv;
 619         int i;
 620
 621         for (i = 0; i < 3; i++)
 622                 if (!priv->reset(dev, 1))
 623                         break;
 624
 625         if (netif_running(dev->net))
 626                 phy_start(priv->phydev);
 627 }
 628
 629 static int asix_resume(struct usb_interface *intf)
 630 {
 631         struct usbnet *dev = usb_get_intfdata(intf);
 632         struct asix_common_private *priv = dev->driver_priv;
 633
 634         if (priv && priv->resume)
 635                 priv->resume(dev);
 636
 637         return usbnet_resume(intf);
 638 }
 639
 640 static int ax88772_init_mdio(struct usbnet *dev)
 641 {
 642         struct asix_common_private *priv = dev->driver_priv;
 643
 644         priv->mdio = devm_mdiobus_alloc(&dev->udev->dev);
 645         if (!priv->mdio)
 646                 return -ENOMEM;
 647
 648         priv->mdio->priv = dev;
 649         priv->mdio->read = &asix_mdio_bus_read;
 650         priv->mdio->write = &asix_mdio_bus_write;
 651         priv->mdio->name = "Asix MDIO Bus";
 652         /* mii bus name is usb-<usb bus number>-<usb device number> */
 653         snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
 654                  dev->udev->bus->busnum, dev->udev->devnum);
 655
 656         return devm_mdiobus_register(&dev->udev->dev, priv->mdio);
 657 }
 658
 659 static int ax88772_init_phy(struct usbnet *dev)
 660 {
 661         struct asix_common_private *priv = dev->driver_priv;
 662         int ret;
 663
 664         priv->phydev = mdiobus_get_phy(priv->mdio, priv->phy_addr);
 665         if (!priv->phydev) {
 666                 netdev_err(dev->net, "Could not find PHY\n");
 667                 return -ENODEV;
 668         }
 669
 670         ret = phy_connect_direct(dev->net, priv->phydev, &asix_adjust_link,
 671                                  PHY_INTERFACE_MODE_INTERNAL);
 672         if (ret) {
 673                 netdev_err(dev->net, "Could not connect PHY\n");
 674                 return ret;
 675         }
 676
 677         phy_suspend(priv->phydev);
 678         priv->phydev->mac_managed_pm = 1;
 679
 680         phy_attached_info(priv->phydev);
 681
 682         if (priv->embd_phy)
 683                 return 0;
 684
 685         /* In case main PHY is not the embedded PHY and MAC is RMII clock
 686          * provider, we need to suspend embedded PHY by keeping PLL enabled
 687          * (AX_SWRESET_IPPD == 0).
 688          */
 689         priv->phydev_int = mdiobus_get_phy(priv->mdio, AX_EMBD_PHY_ADDR);
 690         if (!priv->phydev_int) {
 691                 netdev_err(dev->net, "Could not find internal PHY\n");
 692                 return -ENODEV;
 693         }
 694
 695         priv->phydev_int->mac_managed_pm = 1;
 696         phy_suspend(priv->phydev_int);
 697
 698         return 0;
 699 }
 700
 701 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 702 {
 703         struct asix_common_private *priv;
 704         u8 buf[ETH_ALEN] = {0};
 705         int ret, i;
 706
 707         priv = devm_kzalloc(&dev->udev->dev, sizeof(*priv), GFP_KERNEL);
 708         if (!priv)
 709                 return -ENOMEM;
 710
 711         dev->driver_priv = priv;
 712
 713         usbnet_get_endpoints(dev, intf);
 714
 715         /* Maybe the boot loader passed the MAC address via device tree */
 716         if (!eth_platform_get_mac_address(&dev->udev->dev, buf)) {
 717                 netif_dbg(dev, ifup, dev->net,
 718                           "MAC address read from device tree");
 719         } else {
 720                 /* Try getting the MAC address from EEPROM */
 721                 if (dev->driver_info->data & FLAG_EEPROM_MAC) {
 722                         for (i = 0; i < (ETH_ALEN >> 1); i++) {
 723                                 ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM,
 724                                                     0x04 + i, 0, 2, buf + i * 2,
 725                                                     0);
 726                                 if (ret < 0)
 727                                         break;
 728                         }
 729                 } else {
 730                         ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
 731                                             0, 0, ETH_ALEN, buf, 0);
 732                 }
 733
 734                 if (ret < 0) {
 735                         netdev_dbg(dev->net, "Failed to read MAC address: %d\n",
 736                                    ret);
 737                         return ret;
 738                 }
 739         }
 740
 741         asix_set_netdev_dev_addr(dev, buf);
 742
 743         dev->net->netdev_ops = &ax88772_netdev_ops;
 744         dev->net->ethtool_ops = &ax88772_ethtool_ops;
 745         dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
 746         dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
 747
 748         ret = asix_read_phy_addr(dev, true);
 749         if (ret < 0)
 750                 return ret;
 751
 752         priv->phy_addr = ret;
 753         priv->embd_phy = ((priv->phy_addr & 0x1f) == AX_EMBD_PHY_ADDR);
 754
 755         ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1,
 756                             &priv->chipcode, 0);
 757         if (ret < 0) {
 758                 netdev_dbg(dev->net, "Failed to read STATMNGSTS_REG: %d\n", ret);
 759                 return ret;
 760         }
 761
 762         priv->chipcode &= AX_CHIPCODE_MASK;
 763
 764         priv->resume = ax88772_resume;
 765         priv->suspend = ax88772_suspend;
 766         if (priv->chipcode == AX_AX88772_CHIPCODE)
 767                 priv->reset = ax88772_hw_reset;
 768         else
 769                 priv->reset = ax88772a_hw_reset;
 770
 771         ret = priv->reset(dev, 0);
 772         if (ret < 0) {
 773                 netdev_dbg(dev->net, "Failed to reset AX88772: %d\n", ret);
 774                 return ret;
 775         }
 776
 777         /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
 778         if (dev->driver_info->flags & FLAG_FRAMING_AX) {
 779                 /* hard_mtu  is still the default - the device does not support
 780                    jumbo eth frames */
 781                 dev->rx_urb_size = 2048;
 782         }
 783
 784         priv->presvd_phy_bmcr = 0;
 785         priv->presvd_phy_advertise = 0;
 786
 787         ret = ax88772_init_mdio(dev);
 788         if (ret)
 789                 return ret;
 790
 791         return ax88772_init_phy(dev);
 792 }
 793
 794 static int ax88772_stop(struct usbnet *dev)
 795 {
 796         struct asix_common_private *priv = dev->driver_priv;
 797
 798         /* On unplugged USB, we will get MDIO communication errors and the
 799          * PHY will be set in to PHY_HALTED state.
 800          */
 801         if (priv->phydev->state != PHY_HALTED)
 802                 phy_stop(priv->phydev);
 803
 804         return 0;
 805 }
 806
 807 static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
 808 {
 809         struct asix_common_private *priv = dev->driver_priv;
 810
 811         phy_disconnect(priv->phydev);
 812         asix_rx_fixup_common_free(dev->driver_priv);
 813 }
 814
 815 static void ax88178_unbind(struct usbnet *dev, struct usb_interface *intf)
 816 {
 817         asix_rx_fixup_common_free(dev->driver_priv);
 818         kfree(dev->driver_priv);
 819 }
 820
 821 static const struct ethtool_ops ax88178_ethtool_ops = {
 822         .get_drvinfo            = asix_get_drvinfo,
 823         .get_link               = asix_get_link,
 824         .get_msglevel           = usbnet_get_msglevel,
 825         .set_msglevel           = usbnet_set_msglevel,
 826         .get_wol                = asix_get_wol,
 827         .set_wol                = asix_set_wol,
 828         .get_eeprom_len         = asix_get_eeprom_len,
 829         .get_eeprom             = asix_get_eeprom,
 830         .set_eeprom             = asix_set_eeprom,
 831         .nway_reset             = usbnet_nway_reset,
 832         .get_link_ksettings     = usbnet_get_link_ksettings_mii,
 833         .set_link_ksettings     = usbnet_set_link_ksettings_mii,
 834 };
 835
 836 static int marvell_phy_init(struct usbnet *dev)
 837 {
 838         struct asix_data *data = (struct asix_data *)&dev->data;
 839         u16 reg;
 840
 841         netdev_dbg(dev->net, "marvell_phy_init()\n");
 842
 843         reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
 844         netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg);
 845
 846         asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
 847                         MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
 848
 849         if (data->ledmode) {
 850                 reg = asix_mdio_read(dev->net, dev->mii.phy_id,
 851                         MII_MARVELL_LED_CTRL);
 852                 netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg);
 853
 854                 reg &= 0xf8ff;
 855                 reg |= (1 + 0x0100);
 856                 asix_mdio_write(dev->net, dev->mii.phy_id,
 857                         MII_MARVELL_LED_CTRL, reg);
 858
 859                 reg = asix_mdio_read(dev->net, dev->mii.phy_id,
 860                         MII_MARVELL_LED_CTRL);
 861                 netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg);
 862         }
 863
 864         return 0;
 865 }
 866
 867 static int rtl8211cl_phy_init(struct usbnet *dev)
 868 {
 869         struct asix_data *data = (struct asix_data *)&dev->data;
 870
 871         netdev_dbg(dev->net, "rtl8211cl_phy_init()\n");
 872
 873         asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005);
 874         asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0);
 875         asix_mdio_write (dev->net, dev->mii.phy_id, 0x01,
 876                 asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080);
 877         asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
 878
 879         if (data->ledmode == 12) {
 880                 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002);
 881                 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb);
 882                 asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
 883         }
 884
 885         return 0;
 886 }
 887
 888 static int marvell_led_status(struct usbnet *dev, u16 speed)
 889 {
 890         u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
 891
 892         netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg);
 893
 894         /* Clear out the center LED bits - 0x03F0 */
 895         reg &= 0xfc0f;
 896
 897         switch (speed) {
 898                 case SPEED_1000:
 899                         reg |= 0x03e0;
 900                         break;
 901                 case SPEED_100:
 902                         reg |= 0x03b0;
 903                         break;
 904                 default:
 905                         reg |= 0x02f0;
 906         }
 907
 908         netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg);
 909         asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
 910
 911         return 0;
 912 }
 913
 914 static int ax88178_reset(struct usbnet *dev)
 915 {
 916         struct asix_data *data = (struct asix_data *)&dev->data;
 917         int ret;
 918         __le16 eeprom;
 919         u8 status;
 920         int gpio0 = 0;
 921         u32 phyid;
 922
 923         ret = asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
 924         if (ret < 0) {
 925                 netdev_dbg(dev->net, "Failed to read GPIOS: %d\n", ret);
 926                 return ret;
 927         }
 928
 929         netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
 930
 931         asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
 932         ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
 933         if (ret < 0) {
 934                 netdev_dbg(dev->net, "Failed to read EEPROM: %d\n", ret);
 935                 return ret;
 936         }
 937
 938         asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
 939
 940         netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
 941
 942         if (eeprom == cpu_to_le16(0xffff)) {
 943                 data->phymode = PHY_MODE_MARVELL;
 944                 data->ledmode = 0;
 945                 gpio0 = 1;
 946         } else {
 947                 data->phymode = le16_to_cpu(eeprom) & 0x7F;
 948                 data->ledmode = le16_to_cpu(eeprom) >> 8;
 949                 gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
 950         }
 951         netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
 952
 953         /* Power up external GigaPHY through AX88178 GPIO pin */
 954         asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 |
 955                         AX_GPIO_GPO1EN, 40, 0);
 956         if ((le16_to_cpu(eeprom) >> 8) != 1) {
 957                 asix_write_gpio(dev, 0x003c, 30, 0);
 958                 asix_write_gpio(dev, 0x001c, 300, 0);
 959                 asix_write_gpio(dev, 0x003c, 30, 0);
 960         } else {
 961                 netdev_dbg(dev->net, "gpio phymode == 1 path\n");
 962                 asix_write_gpio(dev, AX_GPIO_GPO1EN, 30, 0);
 963                 asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30, 0);
 964         }
 965
 966         /* Read PHYID register *AFTER* powering up PHY */
 967         phyid = asix_get_phyid(dev);
 968         netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
 969
 970         /* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
 971         asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL, 0);
 972
 973         asix_sw_reset(dev, 0, 0);
 974         msleep(150);
 975
 976         asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
 977         msleep(150);
 978
 979         asix_write_rx_ctl(dev, 0, 0);
 980
 981         if (data->phymode == PHY_MODE_MARVELL) {
 982                 marvell_phy_init(dev);
 983                 msleep(60);
 984         } else if (data->phymode == PHY_MODE_RTL8211CL)
 985                 rtl8211cl_phy_init(dev);
 986
 987         asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE);
 988         asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 989                         ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 990         asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
 991                         ADVERTISE_1000FULL);
 992
 993         asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
 994         mii_nway_restart(&dev->mii);
 995
 996         /* Rewrite MAC address */
 997         memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
 998         ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
 999                                                         data->mac_addr, 0);
1000         if (ret < 0)
1001                 return ret;
1002
1003         ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
1004         if (ret < 0)
1005                 return ret;
1006
1007         return 0;
1008 }
1009
1010 static int ax88178_link_reset(struct usbnet *dev)
1011 {
1012         u16 mode;
1013         struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
1014         struct asix_data *data = (struct asix_data *)&dev->data;
1015         u32 speed;
1016
1017         netdev_dbg(dev->net, "ax88178_link_reset()\n");
1018
1019         mii_check_media(&dev->mii, 1, 1);
1020         mii_ethtool_gset(&dev->mii, &ecmd);
1021         mode = AX88178_MEDIUM_DEFAULT;
1022         speed = ethtool_cmd_speed(&ecmd);
1023
1024         if (speed == SPEED_1000)
1025                 mode |= AX_MEDIUM_GM;
1026         else if (speed == SPEED_100)
1027                 mode |= AX_MEDIUM_PS;
1028         else
1029                 mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
1030
1031         mode |= AX_MEDIUM_ENCK;
1032
1033         if (ecmd.duplex == DUPLEX_FULL)
1034                 mode |= AX_MEDIUM_FD;
1035         else
1036                 mode &= ~AX_MEDIUM_FD;
1037
1038         netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
1039                    speed, ecmd.duplex, mode);
1040
1041         asix_write_medium_mode(dev, mode, 0);
1042
1043         if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
1044                 marvell_led_status(dev, speed);
1045
1046         return 0;
1047 }
1048
1049 static void ax88178_set_mfb(struct usbnet *dev)
1050 {
1051         u16 mfb = AX_RX_CTL_MFB_16384;
1052         u16 rxctl;
1053         u16 medium;
1054         int old_rx_urb_size = dev->rx_urb_size;
1055
1056         if (dev->hard_mtu < 2048) {
1057                 dev->rx_urb_size = 2048;
1058                 mfb = AX_RX_CTL_MFB_2048;
1059         } else if (dev->hard_mtu < 4096) {
1060                 dev->rx_urb_size = 4096;
1061                 mfb = AX_RX_CTL_MFB_4096;
1062         } else if (dev->hard_mtu < 8192) {
1063                 dev->rx_urb_size = 8192;
1064                 mfb = AX_RX_CTL_MFB_8192;
1065         } else if (dev->hard_mtu < 16384) {
1066                 dev->rx_urb_size = 16384;
1067                 mfb = AX_RX_CTL_MFB_16384;
1068         }
1069
1070         rxctl = asix_read_rx_ctl(dev, 0);
1071         asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb, 0);
1072
1073         medium = asix_read_medium_status(dev, 0);
1074         if (dev->net->mtu > 1500)
1075                 medium |= AX_MEDIUM_JFE;
1076         else
1077                 medium &= ~AX_MEDIUM_JFE;
1078         asix_write_medium_mode(dev, medium, 0);
1079
1080         if (dev->rx_urb_size > old_rx_urb_size)
1081                 usbnet_unlink_rx_urbs(dev);
1082 }
1083
1084 static int ax88178_change_mtu(struct net_device *net, int new_mtu)
1085 {
1086         struct usbnet *dev = netdev_priv(net);
1087         int ll_mtu = new_mtu + net->hard_header_len + 4;
1088
1089         netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
1090
1091         if ((ll_mtu % dev->maxpacket) == 0)
1092                 return -EDOM;
1093
1094         net->mtu = new_mtu;
1095         dev->hard_mtu = net->mtu + net->hard_header_len;
1096         ax88178_set_mfb(dev);
1097
1098         /* max qlen depend on hard_mtu and rx_urb_size */
1099         usbnet_update_max_qlen(dev);
1100
1101         return 0;
1102 }
1103
1104 static const struct net_device_ops ax88178_netdev_ops = {
1105         .ndo_open               = usbnet_open,
1106         .ndo_stop               = usbnet_stop,
1107         .ndo_start_xmit         = usbnet_start_xmit,
1108         .ndo_tx_timeout         = usbnet_tx_timeout,
1109         .ndo_get_stats64        = dev_get_tstats64,
1110         .ndo_set_mac_address    = asix_set_mac_address,
1111         .ndo_validate_addr      = eth_validate_addr,
1112         .ndo_set_rx_mode        = asix_set_multicast,
1113         .ndo_eth_ioctl          = asix_ioctl,
1114         .ndo_change_mtu         = ax88178_change_mtu,
1115 };
1116
1117 static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
1118 {
1119         int ret;
1120         u8 buf[ETH_ALEN] = {0};
1121
1122         usbnet_get_endpoints(dev,intf);
1123
1124         /* Get the MAC address */
1125         ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
1126         if (ret < 0) {
1127                 netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
1128                 return ret;
1129         }
1130
1131         asix_set_netdev_dev_addr(dev, buf);
1132
1133         /* Initialize MII structure */
1134         dev->mii.dev = dev->net;
1135         dev->mii.mdio_read = asix_mdio_read;
1136         dev->mii.mdio_write = asix_mdio_write;
1137         dev->mii.phy_id_mask = 0x1f;
1138         dev->mii.reg_num_mask = 0xff;
1139         dev->mii.supports_gmii = 1;
1140
1141         dev->mii.phy_id = asix_read_phy_addr(dev, true);
1142         if (dev->mii.phy_id < 0)
1143                 return dev->mii.phy_id;
1144
1145         dev->net->netdev_ops = &ax88178_netdev_ops;
1146         dev->net->ethtool_ops = &ax88178_ethtool_ops;
1147         dev->net->max_mtu = 16384 - (dev->net->hard_header_len + 4);
1148
1149         /* Blink LEDS so users know driver saw dongle */
1150         asix_sw_reset(dev, 0, 0);
1151         msleep(150);
1152
1153         asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
1154         msleep(150);
1155
1156         /* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
1157         if (dev->driver_info->flags & FLAG_FRAMING_AX) {
1158                 /* hard_mtu  is still the default - the device does not support
1159                    jumbo eth frames */
1160                 dev->rx_urb_size = 2048;
1161         }
1162
1163         dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL);
1164         if (!dev->driver_priv)
1165                         return -ENOMEM;
1166
1167         return 0;
1168 }
1169
1170 static const struct driver_info ax8817x_info = {
1171         .description = "ASIX AX8817x USB 2.0 Ethernet",
1172         .bind = ax88172_bind,
1173         .status = asix_status,
1174         .link_reset = ax88172_link_reset,
1175         .reset = ax88172_link_reset,
1176         .flags =  FLAG_ETHER | FLAG_LINK_INTR,
1177         .data = 0x00130103,
1178 };
1179
1180 static const struct driver_info dlink_dub_e100_info = {
1181         .description = "DLink DUB-E100 USB Ethernet",
1182         .bind = ax88172_bind,
1183         .status = asix_status,
1184         .link_reset = ax88172_link_reset,
1185         .reset = ax88172_link_reset,
1186         .flags =  FLAG_ETHER | FLAG_LINK_INTR,
1187         .data = 0x009f9d9f,
1188 };
1189
1190 static const struct driver_info netgear_fa120_info = {
1191         .description = "Netgear FA-120 USB Ethernet",
1192         .bind = ax88172_bind,
1193         .status = asix_status,
1194         .link_reset = ax88172_link_reset,
1195         .reset = ax88172_link_reset,
1196         .flags =  FLAG_ETHER | FLAG_LINK_INTR,
1197         .data = 0x00130103,
1198 };
1199
1200 static const struct driver_info hawking_uf200_info = {
1201         .description = "Hawking UF200 USB Ethernet",
1202         .bind = ax88172_bind,
1203         .status = asix_status,
1204         .link_reset = ax88172_link_reset,
1205         .reset = ax88172_link_reset,
1206         .flags =  FLAG_ETHER | FLAG_LINK_INTR,
1207         .data = 0x001f1d1f,
1208 };
1209
1210 static const struct driver_info ax88772_info = {
1211         .description = "ASIX AX88772 USB 2.0 Ethernet",
1212         .bind = ax88772_bind,
1213         .unbind = ax88772_unbind,
1214         .status = asix_status,
1215         .reset = ax88772_reset,
1216         .stop = ax88772_stop,
1217         .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
1218         .rx_fixup = asix_rx_fixup_common,
1219         .tx_fixup = asix_tx_fixup,
1220 };
1221
1222 static const struct driver_info ax88772b_info = {
1223         .description = "ASIX AX88772B USB 2.0 Ethernet",
1224         .bind = ax88772_bind,
1225         .unbind = ax88772_unbind,
1226         .status = asix_status,
1227         .reset = ax88772_reset,
1228         .stop = ax88772_stop,
1229         .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1230                  FLAG_MULTI_PACKET,
1231         .rx_fixup = asix_rx_fixup_common,
1232         .tx_fixup = asix_tx_fixup,
1233         .data = FLAG_EEPROM_MAC,
1234 };
1235
1236 static const struct driver_info ax88178_info = {
1237         .description = "ASIX AX88178 USB 2.0 Ethernet",
1238         .bind = ax88178_bind,
1239         .unbind = ax88178_unbind,
1240         .status = asix_status,
1241         .link_reset = ax88178_link_reset,
1242         .reset = ax88178_reset,
1243         .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1244                  FLAG_MULTI_PACKET,
1245         .rx_fixup = asix_rx_fixup_common,
1246         .tx_fixup = asix_tx_fixup,
1247 };
1248
1249 /*
1250  * USBLINK 20F9 "USB 2.0 LAN" USB ethernet adapter, typically found in
1251  * no-name packaging.
1252  * USB device strings are:
1253  *   1: Manufacturer: USBLINK
1254  *   2: Product: HG20F9 USB2.0
1255  *   3: Serial: 000003
1256  * Appears to be compatible with Asix 88772B.
1257  */
1258 static const struct driver_info hg20f9_info = {
1259         .description = "HG20F9 USB 2.0 Ethernet",
1260         .bind = ax88772_bind,
1261         .unbind = ax88772_unbind,
1262         .status = asix_status,
1263         .reset = ax88772_reset,
1264         .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
1265                  FLAG_MULTI_PACKET,
1266         .rx_fixup = asix_rx_fixup_common,
1267         .tx_fixup = asix_tx_fixup,
1268         .data = FLAG_EEPROM_MAC,
1269 };
1270
1271 static const struct usb_device_id       products [] = {
1272 {
1273         // Linksys USB200M
1274         USB_DEVICE (0x077b, 0x2226),
1275         .driver_info =  (unsigned long) &ax8817x_info,
1276 }, {
1277         // Netgear FA120
1278         USB_DEVICE (0x0846, 0x1040),
1279         .driver_info =  (unsigned long) &netgear_fa120_info,
1280 }, {
1281         // DLink DUB-E100
1282         USB_DEVICE (0x2001, 0x1a00),
1283         .driver_info =  (unsigned long) &dlink_dub_e100_info,
1284 }, {
1285         // Intellinet, ST Lab USB Ethernet
1286         USB_DEVICE (0x0b95, 0x1720),
1287         .driver_info =  (unsigned long) &ax8817x_info,
1288 }, {
1289         // Hawking UF200, TrendNet TU2-ET100
1290         USB_DEVICE (0x07b8, 0x420a),
1291         .driver_info =  (unsigned long) &hawking_uf200_info,
1292 }, {
1293         // Billionton Systems, USB2AR
1294         USB_DEVICE (0x08dd, 0x90ff),
1295         .driver_info =  (unsigned long) &ax8817x_info,
1296 }, {
1297         // Billionton Systems, GUSB2AM-1G-B
1298         USB_DEVICE(0x08dd, 0x0114),
1299         .driver_info =  (unsigned long) &ax88178_info,
1300 }, {
1301         // ATEN UC210T
1302         USB_DEVICE (0x0557, 0x2009),
1303         .driver_info =  (unsigned long) &ax8817x_info,
1304 }, {
1305         // Buffalo LUA-U2-KTX
1306         USB_DEVICE (0x0411, 0x003d),
1307         .driver_info =  (unsigned long) &ax8817x_info,
1308 }, {
1309         // Buffalo LUA-U2-GT 10/100/1000
1310         USB_DEVICE (0x0411, 0x006e),
1311         .driver_info =  (unsigned long) &ax88178_info,
1312 }, {
1313         // Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
1314         USB_DEVICE (0x6189, 0x182d),
1315         .driver_info =  (unsigned long) &ax8817x_info,
1316 }, {
1317         // Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter"
1318         USB_DEVICE (0x0df6, 0x0056),
1319         .driver_info =  (unsigned long) &ax88178_info,
1320 }, {
1321         // Sitecom LN-028 "USB 2.0 10/100/1000 Ethernet adapter"
1322         USB_DEVICE (0x0df6, 0x061c),
1323         .driver_info =  (unsigned long) &ax88178_info,
1324 }, {
1325         // corega FEther USB2-TX
1326         USB_DEVICE (0x07aa, 0x0017),
1327         .driver_info =  (unsigned long) &ax8817x_info,
1328 }, {
1329         // Surecom EP-1427X-2
1330         USB_DEVICE (0x1189, 0x0893),
1331         .driver_info = (unsigned long) &ax8817x_info,
1332 }, {
1333         // goodway corp usb gwusb2e
1334         USB_DEVICE (0x1631, 0x6200),
1335         .driver_info = (unsigned long) &ax8817x_info,
1336 }, {
1337         // JVC MP-PRX1 Port Replicator
1338         USB_DEVICE (0x04f1, 0x3008),
1339         .driver_info = (unsigned long) &ax8817x_info,
1340 }, {
1341         // Lenovo U2L100P 10/100
1342         USB_DEVICE (0x17ef, 0x7203),
1343         .driver_info = (unsigned long)&ax88772b_info,
1344 }, {
1345         // ASIX AX88772B 10/100
1346         USB_DEVICE (0x0b95, 0x772b),
1347         .driver_info = (unsigned long) &ax88772b_info,
1348 }, {
1349         // ASIX AX88772 10/100
1350         USB_DEVICE (0x0b95, 0x7720),
1351         .driver_info = (unsigned long) &ax88772_info,
1352 }, {
1353         // ASIX AX88178 10/100/1000
1354         USB_DEVICE (0x0b95, 0x1780),
1355         .driver_info = (unsigned long) &ax88178_info,
1356 }, {
1357         // Logitec LAN-GTJ/U2A
1358         USB_DEVICE (0x0789, 0x0160),
1359         .driver_info = (unsigned long) &ax88178_info,
1360 }, {
1361         // Linksys USB200M Rev 2
1362         USB_DEVICE (0x13b1, 0x0018),
1363         .driver_info = (unsigned long) &ax88772_info,
1364 }, {
1365         // 0Q0 cable ethernet
1366         USB_DEVICE (0x1557, 0x7720),
1367         .driver_info = (unsigned long) &ax88772_info,
1368 }, {
1369         // DLink DUB-E100 H/W Ver B1
1370         USB_DEVICE (0x07d1, 0x3c05),
1371         .driver_info = (unsigned long) &ax88772_info,
1372 }, {
1373         // DLink DUB-E100 H/W Ver B1 Alternate
1374         USB_DEVICE (0x2001, 0x3c05),
1375         .driver_info = (unsigned long) &ax88772_info,
1376 }, {
1377        // DLink DUB-E100 H/W Ver C1
1378        USB_DEVICE (0x2001, 0x1a02),
1379        .driver_info = (unsigned long) &ax88772_info,
1380 }, {
1381         // Linksys USB1000
1382         USB_DEVICE (0x1737, 0x0039),
1383         .driver_info = (unsigned long) &ax88178_info,
1384 }, {
1385         // IO-DATA ETG-US2
1386         USB_DEVICE (0x04bb, 0x0930),
1387         .driver_info = (unsigned long) &ax88178_info,
1388 }, {
1389         // Belkin F5D5055
1390         USB_DEVICE(0x050d, 0x5055),
1391         .driver_info = (unsigned long) &ax88178_info,
1392 }, {
1393         // Apple USB Ethernet Adapter
1394         USB_DEVICE(0x05ac, 0x1402),
1395         .driver_info = (unsigned long) &ax88772_info,
1396 }, {
1397         // Cables-to-Go USB Ethernet Adapter
1398         USB_DEVICE(0x0b95, 0x772a),
1399         .driver_info = (unsigned long) &ax88772_info,
1400 }, {
1401         // ABOCOM for pci
1402         USB_DEVICE(0x14ea, 0xab11),
1403         .driver_info = (unsigned long) &ax88178_info,
1404 }, {
1405         // ASIX 88772a
1406         USB_DEVICE(0x0db0, 0xa877),
1407         .driver_info = (unsigned long) &ax88772_info,
1408 }, {
1409         // Asus USB Ethernet Adapter
1410         USB_DEVICE (0x0b95, 0x7e2b),
1411         .driver_info = (unsigned long)&ax88772b_info,
1412 }, {
1413         /* ASIX 88172a demo board */
1414         USB_DEVICE(0x0b95, 0x172a),
1415         .driver_info = (unsigned long) &ax88172a_info,
1416 }, {
1417         /*
1418          * USBLINK HG20F9 "USB 2.0 LAN"
1419          * Appears to have gazumped Linksys's manufacturer ID but
1420          * doesn't (yet) conflict with any known Linksys product.
1421          */
1422         USB_DEVICE(0x066b, 0x20f9),
1423         .driver_info = (unsigned long) &hg20f9_info,
1424 },
1425         { },            // END
1426 };
1427 MODULE_DEVICE_TABLE(usb, products);
1428
1429 static struct usb_driver asix_driver = {
1430         .name =         DRIVER_NAME,
1431         .id_table =     products,
1432         .probe =        usbnet_probe,
1433         .suspend =      asix_suspend,
1434         .resume =       asix_resume,
1435         .reset_resume = asix_resume,
1436         .disconnect =   usbnet_disconnect,
1437         .supports_autosuspend = 1,
1438         .disable_hub_initiated_lpm = 1,
1439 };
1440
1441 module_usb_driver(asix_driver);
1442
1443 MODULE_AUTHOR("David Hollis");
1444 MODULE_VERSION(DRIVER_VERSION);
1445 MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
1446 MODULE_LICENSE("GPL");
1447