drivers/usb/serial/usb-serial.c

   1 /*
   2  * USB Serial Converter driver
   3  *
   4  * Copyright (C) 1999 - 2005 Greg Kroah-Hartman ([email protected])
   5  * Copyright (C) 2000 Peter Berger ([email protected])
   6  * Copyright (C) 2000 Al Borchers ([email protected])
   7  *
   8  *      This program is free software; you can redistribute it and/or
   9  *      modify it under the terms of the GNU General Public License version
  10  *      2 as published by the Free Software Foundation.
  11  *
  12  * This driver was originally based on the ACM driver by Armin Fuerst (which was
  13  * based on a driver by Brad Keryan)
  14  *
  15  * See Documentation/usb/usb-serial.txt for more information on using this
  16  * driver
  17  *
  18  */
  19
  20 #include <linux/kernel.h>
  21 #include <linux/errno.h>
  22 #include <linux/init.h>
  23 #include <linux/slab.h>
  24 #include <linux/smp_lock.h>
  25 #include <linux/tty.h>
  26 #include <linux/tty_driver.h>
  27 #include <linux/tty_flip.h>
  28 #include <linux/module.h>
  29 #include <linux/moduleparam.h>
  30 #include <linux/seq_file.h>
  31 #include <linux/spinlock.h>
  32 #include <linux/mutex.h>
  33 #include <linux/list.h>
  34 #include <linux/uaccess.h>
  35 #include <linux/serial.h>
  36 #include <linux/usb.h>
  37 #include <linux/usb/serial.h>
  38 #include <linux/kfifo.h>
  39 #include "pl2303.h"
  40
  41 /*
  42  * Version Information
  43  */
  44 #define DRIVER_AUTHOR "Greg Kroah-Hartman, [email protected], http://www.kroah.com/linux/"
  45 #define DRIVER_DESC "USB Serial Driver core"
  46
  47 /* Driver structure we register with the USB core */
  48 static struct usb_driver usb_serial_driver = {
  49         .name =         "usbserial",
  50         .probe =        usb_serial_probe,
  51         .disconnect =   usb_serial_disconnect,
  52         .suspend =      usb_serial_suspend,
  53         .resume =       usb_serial_resume,
  54         .no_dynamic_id =        1,
  55 };
  56
  57 /* There is no MODULE_DEVICE_TABLE for usbserial.c.  Instead
  58    the MODULE_DEVICE_TABLE declarations in each serial driver
  59    cause the "hotplug" program to pull in whatever module is necessary
  60    via modprobe, and modprobe will load usbserial because the serial
  61    drivers depend on it.
  62 */
  63
  64 static int debug;
  65 /* initially all NULL */
  66 static struct usb_serial *serial_table[SERIAL_TTY_MINORS];
  67 static DEFINE_MUTEX(table_lock);
  68 static LIST_HEAD(usb_serial_driver_list);
  69
  70 /*
  71  * Look up the serial structure.  If it is found and it hasn't been
  72  * disconnected, return with its disc_mutex held and its refcount
  73  * incremented.  Otherwise return NULL.
  74  */
  75 struct usb_serial *usb_serial_get_by_index(unsigned index)
  76 {
  77         struct usb_serial *serial;
  78
  79         mutex_lock(&table_lock);
  80         serial = serial_table[index];
  81
  82         if (serial) {
  83                 mutex_lock(&serial->disc_mutex);
  84                 if (serial->disconnected) {
  85                         mutex_unlock(&serial->disc_mutex);
  86                         serial = NULL;
  87                 } else {
  88                         kref_get(&serial->kref);
  89                 }
  90         }
  91         mutex_unlock(&table_lock);
  92         return serial;
  93 }
  94
  95 static struct usb_serial *get_free_serial(struct usb_serial *serial,
  96                                         int num_ports, unsigned int *minor)
  97 {
  98         unsigned int i, j;
  99         int good_spot;
 100
 101         dbg("%s %d", __func__, num_ports);
 102
 103         *minor = 0;
 104         mutex_lock(&table_lock);
 105         for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
 106                 if (serial_table[i])
 107                         continue;
 108
 109                 good_spot = 1;
 110                 for (j = 1; j <= num_ports-1; ++j)
 111                         if ((i+j >= SERIAL_TTY_MINORS) || (serial_table[i+j])) {
 112                                 good_spot = 0;
 113                                 i += j;
 114                                 break;
 115                         }
 116                 if (good_spot == 0)
 117                         continue;
 118
 119                 *minor = i;
 120                 j = 0;
 121                 dbg("%s - minor base = %d", __func__, *minor);
 122                 for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) {
 123                         serial_table[i] = serial;
 124                         serial->port[j++]->number = i;
 125                 }
 126                 mutex_unlock(&table_lock);
 127                 return serial;
 128         }
 129         mutex_unlock(&table_lock);
 130         return NULL;
 131 }
 132
 133 static void return_serial(struct usb_serial *serial)
 134 {
 135         int i;
 136
 137         dbg("%s", __func__);
 138
 139         mutex_lock(&table_lock);
 140         for (i = 0; i < serial->num_ports; ++i)
 141                 serial_table[serial->minor + i] = NULL;
 142         mutex_unlock(&table_lock);
 143 }
 144
 145 static void destroy_serial(struct kref *kref)
 146 {
 147         struct usb_serial *serial;
 148         struct usb_serial_port *port;
 149         int i;
 150
 151         serial = to_usb_serial(kref);
 152
 153         dbg("%s - %s", __func__, serial->type->description);
 154
 155         /* return the minor range that this device had */
 156         if (serial->minor != SERIAL_TTY_NO_MINOR)
 157                 return_serial(serial);
 158
 159         if (serial->attached)
 160                 serial->type->release(serial);
 161
 162         /* Now that nothing is using the ports, they can be freed */
 163         for (i = 0; i < serial->num_port_pointers; ++i) {
 164                 port = serial->port[i];
 165                 if (port) {
 166                         port->serial = NULL;
 167                         put_device(&port->dev);
 168                 }
 169         }
 170
 171         usb_put_dev(serial->dev);
 172         kfree(serial);
 173 }
 174
 175 void usb_serial_put(struct usb_serial *serial)
 176 {
 177         kref_put(&serial->kref, destroy_serial);
 178 }
 179
 180 /*****************************************************************************
 181  * Driver tty interface functions
 182  *****************************************************************************/
 183
 184 /**
 185  * serial_install - install tty
 186  * @driver: the driver (USB in our case)
 187  * @tty: the tty being created
 188  *
 189  * Create the termios objects for this tty.  We use the default
 190  * USB serial settings but permit them to be overridden by
 191  * serial->type->init_termios.
 192  *
 193  * This is the first place a new tty gets used.  Hence this is where we
 194  * acquire references to the usb_serial structure and the driver module,
 195  * where we store a pointer to the port, and where we do an autoresume.
 196  * All these actions are reversed in serial_cleanup().
 197  */
 198 static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 199 {
 200         int idx = tty->index;
 201         struct usb_serial *serial;
 202         struct usb_serial_port *port;
 203         int retval = -ENODEV;
 204
 205         dbg("%s", __func__);
 206
 207         serial = usb_serial_get_by_index(idx);
 208         if (!serial)
 209                 return retval;
 210
 211         port = serial->port[idx - serial->minor];
 212         if (!port)
 213                 goto error_no_port;
 214         if (!try_module_get(serial->type->driver.owner))
 215                 goto error_module_get;
 216
 217         /* perform the standard setup */
 218         retval = tty_init_termios(tty);
 219         if (retval)
 220                 goto error_init_termios;
 221
 222         retval = usb_autopm_get_interface(serial->interface);
 223         if (retval)
 224                 goto error_get_interface;
 225
 226         mutex_unlock(&serial->disc_mutex);
 227
 228         /* allow the driver to update the settings */
 229         if (serial->type->init_termios)
 230                 serial->type->init_termios(tty);
 231
 232         tty->driver_data = port;
 233
 234         /* Final install (we use the default method) */
 235         tty_driver_kref_get(driver);
 236         tty->count++;
 237         driver->ttys[idx] = tty;
 238         return retval;
 239
 240  error_get_interface:
 241  error_init_termios:
 242         module_put(serial->type->driver.owner);
 243  error_module_get:
 244  error_no_port:
 245         usb_serial_put(serial);
 246         mutex_unlock(&serial->disc_mutex);
 247         return retval;
 248 }
 249
 250 static int serial_activate(struct tty_port *tport, struct tty_struct *tty)
 251 {
 252         struct usb_serial_port *port =
 253                 container_of(tport, struct usb_serial_port, port);
 254         struct usb_serial *serial = port->serial;
 255         int retval;
 256
 257         mutex_lock(&serial->disc_mutex);
 258         if (serial->disconnected)
 259                 retval = -ENODEV;
 260         else
 261                 retval = port->serial->type->open(tty, port);
 262         mutex_unlock(&serial->disc_mutex);
 263         return retval;
 264 }
 265
 266 static int serial_open(struct tty_struct *tty, struct file *filp)
 267 {
 268         struct usb_serial_port *port = tty->driver_data;
 269
 270         dbg("%s - port %d", __func__, port->number);
 271         return tty_port_open(&port->port, tty, filp);
 272 }
 273
 274 /**
 275  * serial_down - shut down hardware
 276  * @tport: tty port to shut down
 277  *
 278  * Shut down a USB serial port unless it is the console.  We never
 279  * shut down the console hardware as it will always be in use. Serialized
 280  * against activate by the tport mutex and kept to matching open/close pairs
 281  * of calls by the ASYNCB_INITIALIZED flag.
 282  */
 283 static void serial_down(struct tty_port *tport)
 284 {
 285         struct usb_serial_port *port =
 286                 container_of(tport, struct usb_serial_port, port);
 287         struct usb_serial_driver *drv = port->serial->type;
 288         /*
 289          * The console is magical.  Do not hang up the console hardware
 290          * or there will be tears.
 291          */
 292         if (port->port.console)
 293                 return;
 294         if (drv->close)
 295                 drv->close(port);
 296 }
 297
 298 static void serial_hangup(struct tty_struct *tty)
 299 {
 300         struct usb_serial_port *port = tty->driver_data;
 301         dbg("%s - port %d", __func__, port->number);
 302         tty_port_hangup(&port->port);
 303 }
 304
 305 static void serial_close(struct tty_struct *tty, struct file *filp)
 306 {
 307         struct usb_serial_port *port = tty->driver_data;
 308         dbg("%s - port %d", __func__, port->number);
 309         tty_port_close(&port->port, tty, filp);
 310 }
 311
 312 /**
 313  * serial_cleanup - free resources post close/hangup
 314  * @port: port to free up
 315  *
 316  * Do the resource freeing and refcount dropping for the port.
 317  * Avoid freeing the console.
 318  *
 319  * Called asynchronously after the last tty kref is dropped,
 320  * and the tty layer has already done the tty_shutdown(tty);
 321  */
 322 static void serial_cleanup(struct tty_struct *tty)
 323 {
 324         struct usb_serial_port *port = tty->driver_data;
 325         struct usb_serial *serial;
 326         struct module *owner;
 327
 328         /* The console is magical.  Do not hang up the console hardware
 329          * or there will be tears.
 330          */
 331         if (port->port.console)
 332                 return;
 333
 334         dbg("%s - port %d", __func__, port->number);
 335
 336         tty->driver_data = NULL;
 337
 338         serial = port->serial;
 339         owner = serial->type->driver.owner;
 340
 341         mutex_lock(&serial->disc_mutex);
 342         if (!serial->disconnected)
 343                 usb_autopm_put_interface(serial->interface);
 344         mutex_unlock(&serial->disc_mutex);
 345
 346         usb_serial_put(serial);
 347         module_put(owner);
 348 }
 349
 350 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
 351                                                                 int count)
 352 {
 353         struct usb_serial_port *port = tty->driver_data;
 354         int retval = -ENODEV;
 355
 356         if (port->serial->dev->state == USB_STATE_NOTATTACHED)
 357                 goto exit;
 358
 359         dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 360
 361         /* pass on to the driver specific version of this function */
 362         retval = port->serial->type->write(tty, port, buf, count);
 363
 364 exit:
 365         return retval;
 366 }
 367
 368 static int serial_write_room(struct tty_struct *tty)
 369 {
 370         struct usb_serial_port *port = tty->driver_data;
 371         dbg("%s - port %d", __func__, port->number);
 372         /* pass on to the driver specific version of this function */
 373         return port->serial->type->write_room(tty);
 374 }
 375
 376 static int serial_chars_in_buffer(struct tty_struct *tty)
 377 {
 378         struct usb_serial_port *port = tty->driver_data;
 379         dbg("%s - port %d", __func__, port->number);
 380
 381         /* if the device was unplugged then any remaining characters
 382            fell out of the connector ;) */
 383         if (port->serial->disconnected)
 384                 return 0;
 385         /* pass on to the driver specific version of this function */
 386         return port->serial->type->chars_in_buffer(tty);
 387 }
 388
 389 static void serial_throttle(struct tty_struct *tty)
 390 {
 391         struct usb_serial_port *port = tty->driver_data;
 392         dbg("%s - port %d", __func__, port->number);
 393
 394         /* pass on to the driver specific version of this function */
 395         if (port->serial->type->throttle)
 396                 port->serial->type->throttle(tty);
 397 }
 398
 399 static void serial_unthrottle(struct tty_struct *tty)
 400 {
 401         struct usb_serial_port *port = tty->driver_data;
 402         dbg("%s - port %d", __func__, port->number);
 403
 404         /* pass on to the driver specific version of this function */
 405         if (port->serial->type->unthrottle)
 406                 port->serial->type->unthrottle(tty);
 407 }
 408
 409 static int serial_ioctl(struct tty_struct *tty, struct file *file,
 410                                         unsigned int cmd, unsigned long arg)
 411 {
 412         struct usb_serial_port *port = tty->driver_data;
 413         int retval = -ENODEV;
 414
 415         dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 416
 417         /* pass on to the driver specific version of this function
 418            if it is available */
 419         if (port->serial->type->ioctl) {
 420                 retval = port->serial->type->ioctl(tty, file, cmd, arg);
 421         } else
 422                 retval = -ENOIOCTLCMD;
 423         return retval;
 424 }
 425
 426 static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 427 {
 428         struct usb_serial_port *port = tty->driver_data;
 429         dbg("%s - port %d", __func__, port->number);
 430
 431         /* pass on to the driver specific version of this function
 432            if it is available */
 433         if (port->serial->type->set_termios)
 434                 port->serial->type->set_termios(tty, port, old);
 435         else
 436                 tty_termios_copy_hw(tty->termios, old);
 437 }
 438
 439 static int serial_break(struct tty_struct *tty, int break_state)
 440 {
 441         struct usb_serial_port *port = tty->driver_data;
 442
 443         dbg("%s - port %d", __func__, port->number);
 444
 445         /* pass on to the driver specific version of this function
 446            if it is available */
 447         if (port->serial->type->break_ctl)
 448                 port->serial->type->break_ctl(tty, break_state);
 449         return 0;
 450 }
 451
 452 static int serial_proc_show(struct seq_file *m, void *v)
 453 {
 454         struct usb_serial *serial;
 455         int i;
 456         char tmp[40];
 457
 458         dbg("%s", __func__);
 459         seq_puts(m, "usbserinfo:1.0 driver:2.0\n");
 460         for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
 461                 serial = usb_serial_get_by_index(i);
 462                 if (serial == NULL)
 463                         continue;
 464
 465                 seq_printf(m, "%d:", i);
 466                 if (serial->type->driver.owner)
 467                         seq_printf(m, " module:%s",
 468                                 module_name(serial->type->driver.owner));
 469                 seq_printf(m, " name:\"%s\"",
 470                                 serial->type->description);
 471                 seq_printf(m, " vendor:%04x product:%04x",
 472                         le16_to_cpu(serial->dev->descriptor.idVendor),
 473                         le16_to_cpu(serial->dev->descriptor.idProduct));
 474                 seq_printf(m, " num_ports:%d", serial->num_ports);
 475                 seq_printf(m, " port:%d", i - serial->minor + 1);
 476                 usb_make_path(serial->dev, tmp, sizeof(tmp));
 477                 seq_printf(m, " path:%s", tmp);
 478
 479                 seq_putc(m, '\n');
 480                 usb_serial_put(serial);
 481                 mutex_unlock(&serial->disc_mutex);
 482         }
 483         return 0;
 484 }
 485
 486 static int serial_proc_open(struct inode *inode, struct file *file)
 487 {
 488         return single_open(file, serial_proc_show, NULL);
 489 }
 490
 491 static const struct file_operations serial_proc_fops = {
 492         .owner          = THIS_MODULE,
 493         .open           = serial_proc_open,
 494         .read           = seq_read,
 495         .llseek         = seq_lseek,
 496         .release        = single_release,
 497 };
 498
 499 static int serial_tiocmget(struct tty_struct *tty, struct file *file)
 500 {
 501         struct usb_serial_port *port = tty->driver_data;
 502
 503         dbg("%s - port %d", __func__, port->number);
 504
 505         if (port->serial->type->tiocmget)
 506                 return port->serial->type->tiocmget(tty, file);
 507         return -EINVAL;
 508 }
 509
 510 static int serial_tiocmset(struct tty_struct *tty, struct file *file,
 511                             unsigned int set, unsigned int clear)
 512 {
 513         struct usb_serial_port *port = tty->driver_data;
 514
 515         dbg("%s - port %d", __func__, port->number);
 516
 517         if (port->serial->type->tiocmset)
 518                 return port->serial->type->tiocmset(tty, file, set, clear);
 519         return -EINVAL;
 520 }
 521
 522 /*
 523  * We would be calling tty_wakeup here, but unfortunately some line
 524  * disciplines have an annoying habit of calling tty->write from
 525  * the write wakeup callback (e.g. n_hdlc.c).
 526  */
 527 void usb_serial_port_softint(struct usb_serial_port *port)
 528 {
 529         schedule_work(&port->work);
 530 }
 531 EXPORT_SYMBOL_GPL(usb_serial_port_softint);
 532
 533 static void usb_serial_port_work(struct work_struct *work)
 534 {
 535         struct usb_serial_port *port =
 536                 container_of(work, struct usb_serial_port, work);
 537         struct tty_struct *tty;
 538
 539         dbg("%s - port %d", __func__, port->number);
 540
 541         tty = tty_port_tty_get(&port->port);
 542         if (!tty)
 543                 return;
 544
 545         tty_wakeup(tty);
 546         tty_kref_put(tty);
 547 }
 548
 549 static void kill_traffic(struct usb_serial_port *port)
 550 {
 551         int i;
 552
 553         usb_kill_urb(port->read_urb);
 554         usb_kill_urb(port->write_urb);
 555         for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i)
 556                 usb_kill_urb(port->write_urbs[i]);
 557         /*
 558          * This is tricky.
 559          * Some drivers submit the read_urb in the
 560          * handler for the write_urb or vice versa
 561          * this order determines the order in which
 562          * usb_kill_urb() must be used to reliably
 563          * kill the URBs. As it is unknown here,
 564          * both orders must be used in turn.
 565          * The call below is not redundant.
 566          */
 567         usb_kill_urb(port->read_urb);
 568         usb_kill_urb(port->interrupt_in_urb);
 569         usb_kill_urb(port->interrupt_out_urb);
 570 }
 571
 572 static void port_release(struct device *dev)
 573 {
 574         struct usb_serial_port *port = to_usb_serial_port(dev);
 575         int i;
 576
 577         dbg ("%s - %s", __func__, dev_name(dev));
 578
 579         /*
 580          * Stop all the traffic before cancelling the work, so that
 581          * nobody will restart it by calling usb_serial_port_softint.
 582          */
 583         kill_traffic(port);
 584         cancel_work_sync(&port->work);
 585
 586         usb_free_urb(port->read_urb);
 587         usb_free_urb(port->write_urb);
 588         usb_free_urb(port->interrupt_in_urb);
 589         usb_free_urb(port->interrupt_out_urb);
 590         for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
 591                 usb_free_urb(port->write_urbs[i]);
 592                 kfree(port->bulk_out_buffers[i]);
 593         }
 594         kfifo_free(&port->write_fifo);
 595         kfree(port->bulk_in_buffer);
 596         kfree(port->bulk_out_buffer);
 597         kfree(port->interrupt_in_buffer);
 598         kfree(port->interrupt_out_buffer);
 599         kfree(port);
 600 }
 601
 602 static struct usb_serial *create_serial(struct usb_device *dev,
 603                                         struct usb_interface *interface,
 604                                         struct usb_serial_driver *driver)
 605 {
 606         struct usb_serial *serial;
 607
 608         serial = kzalloc(sizeof(*serial), GFP_KERNEL);
 609         if (!serial) {
 610                 dev_err(&dev->dev, "%s - out of memory\n", __func__);
 611                 return NULL;
 612         }
 613         serial->dev = usb_get_dev(dev);
 614         serial->type = driver;
 615         serial->interface = interface;
 616         kref_init(&serial->kref);
 617         mutex_init(&serial->disc_mutex);
 618         serial->minor = SERIAL_TTY_NO_MINOR;
 619
 620         return serial;
 621 }
 622
 623 static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf,
 624                                             struct usb_serial_driver *drv)
 625 {
 626         struct usb_dynid *dynid;
 627
 628         spin_lock(&drv->dynids.lock);
 629         list_for_each_entry(dynid, &drv->dynids.list, node) {
 630                 if (usb_match_one_id(intf, &dynid->id)) {
 631                         spin_unlock(&drv->dynids.lock);
 632                         return &dynid->id;
 633                 }
 634         }
 635         spin_unlock(&drv->dynids.lock);
 636         return NULL;
 637 }
 638
 639 static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
 640                                                 struct usb_interface *intf)
 641 {
 642         const struct usb_device_id *id;
 643
 644         id = usb_match_id(intf, drv->id_table);
 645         if (id) {
 646                 dbg("static descriptor matches");
 647                 goto exit;
 648         }
 649         id = match_dynamic_id(intf, drv);
 650         if (id)
 651                 dbg("dynamic descriptor matches");
 652 exit:
 653         return id;
 654 }
 655
 656 /* Caller must hold table_lock */
 657 static struct usb_serial_driver *search_serial_device(
 658                                         struct usb_interface *iface)
 659 {
 660         const struct usb_device_id *id;
 661         struct usb_serial_driver *drv;
 662
 663         /* Check if the usb id matches a known device */
 664         list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
 665                 id = get_iface_id(drv, iface);
 666                 if (id)
 667                         return drv;
 668         }
 669
 670         return NULL;
 671 }
 672
 673 static int serial_carrier_raised(struct tty_port *port)
 674 {
 675         struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
 676         struct usb_serial_driver *drv = p->serial->type;
 677         if (drv->carrier_raised)
 678                 return drv->carrier_raised(p);
 679         /* No carrier control - don't block */
 680         return 1;
 681 }
 682
 683 static void serial_dtr_rts(struct tty_port *port, int on)
 684 {
 685         struct usb_serial_port *p = container_of(port, struct usb_serial_port, port);
 686         struct usb_serial_driver *drv = p->serial->type;
 687         if (drv->dtr_rts)
 688                 drv->dtr_rts(p, on);
 689 }
 690
 691 static const struct tty_port_operations serial_port_ops = {
 692         .carrier_raised = serial_carrier_raised,
 693         .dtr_rts = serial_dtr_rts,
 694         .activate = serial_activate,
 695         .shutdown = serial_down,
 696 };
 697
 698 int usb_serial_probe(struct usb_interface *interface,
 699                                const struct usb_device_id *id)
 700 {
 701         struct usb_device *dev = interface_to_usbdev(interface);
 702         struct usb_serial *serial = NULL;
 703         struct usb_serial_port *port;
 704         struct usb_host_interface *iface_desc;
 705         struct usb_endpoint_descriptor *endpoint;
 706         struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS];
 707         struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS];
 708         struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS];
 709         struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS];
 710         struct usb_serial_driver *type = NULL;
 711         int retval;
 712         unsigned int minor;
 713         int buffer_size;
 714         int i;
 715         int num_interrupt_in = 0;
 716         int num_interrupt_out = 0;
 717         int num_bulk_in = 0;
 718         int num_bulk_out = 0;
 719         int num_ports = 0;
 720         int max_endpoints;
 721
 722         mutex_lock(&table_lock);
 723         type = search_serial_device(interface);
 724         if (!type) {
 725                 mutex_unlock(&table_lock);
 726                 dbg("none matched");
 727                 return -ENODEV;
 728         }
 729
 730         if (!try_module_get(type->driver.owner)) {
 731                 mutex_unlock(&table_lock);
 732                 dev_err(&interface->dev, "module get failed, exiting\n");
 733                 return -EIO;
 734         }
 735         mutex_unlock(&table_lock);
 736
 737         serial = create_serial(dev, interface, type);
 738         if (!serial) {
 739                 dev_err(&interface->dev, "%s - out of memory\n", __func__);
 740                 return -ENOMEM;
 741         }
 742
 743         /* if this device type has a probe function, call it */
 744         if (type->probe) {
 745                 const struct usb_device_id *id;
 746
 747                 id = get_iface_id(type, interface);
 748                 retval = type->probe(serial, id);
 749                 module_put(type->driver.owner);
 750
 751                 if (retval) {
 752                         dbg("sub driver rejected device");
 753                         kfree(serial);
 754                         return retval;
 755                 }
 756         }
 757
 758         /* descriptor matches, let's find the endpoints needed */
 759         /* check out the endpoints */
 760         iface_desc = interface->cur_altsetting;
 761         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 762                 endpoint = &iface_desc->endpoint[i].desc;
 763
 764                 if (usb_endpoint_is_bulk_in(endpoint)) {
 765                         /* we found a bulk in endpoint */
 766                         dbg("found bulk in on endpoint %d", i);
 767                         bulk_in_endpoint[num_bulk_in] = endpoint;
 768                         ++num_bulk_in;
 769                 }
 770
 771                 if (usb_endpoint_is_bulk_out(endpoint)) {
 772                         /* we found a bulk out endpoint */
 773                         dbg("found bulk out on endpoint %d", i);
 774                         bulk_out_endpoint[num_bulk_out] = endpoint;
 775                         ++num_bulk_out;
 776                 }
 777
 778                 if (usb_endpoint_is_int_in(endpoint)) {
 779                         /* we found a interrupt in endpoint */
 780                         dbg("found interrupt in on endpoint %d", i);
 781                         interrupt_in_endpoint[num_interrupt_in] = endpoint;
 782                         ++num_interrupt_in;
 783                 }
 784
 785                 if (usb_endpoint_is_int_out(endpoint)) {
 786                         /* we found an interrupt out endpoint */
 787                         dbg("found interrupt out on endpoint %d", i);
 788                         interrupt_out_endpoint[num_interrupt_out] = endpoint;
 789                         ++num_interrupt_out;
 790                 }
 791         }
 792
 793 #if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE)
 794         /* BEGIN HORRIBLE HACK FOR PL2303 */
 795         /* this is needed due to the looney way its endpoints are set up */
 796         if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) &&
 797              (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) ||
 798             ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
 799              (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
 800             ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
 801              (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||
 802             ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
 803              (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
 804                 if (interface != dev->actconfig->interface[0]) {
 805                         /* check out the endpoints of the other interface*/
 806                         iface_desc = dev->actconfig->interface[0]->cur_altsetting;
 807                         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 808                                 endpoint = &iface_desc->endpoint[i].desc;
 809                                 if (usb_endpoint_is_int_in(endpoint)) {
 810                                         /* we found a interrupt in endpoint */
 811                                         dbg("found interrupt in for Prolific device on separate interface");
 812                                         interrupt_in_endpoint[num_interrupt_in] = endpoint;
 813                                         ++num_interrupt_in;
 814                                 }
 815                         }
 816                 }
 817
 818                 /* Now make sure the PL-2303 is configured correctly.
 819                  * If not, give up now and hope this hack will work
 820                  * properly during a later invocation of usb_serial_probe
 821                  */
 822                 if (num_bulk_in == 0 || num_bulk_out == 0) {
 823                         dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
 824                         kfree(serial);
 825                         return -ENODEV;
 826                 }
 827         }
 828         /* END HORRIBLE HACK FOR PL2303 */
 829 #endif
 830
 831 #ifdef CONFIG_USB_SERIAL_GENERIC
 832         if (type == &usb_serial_generic_device) {
 833                 num_ports = num_bulk_out;
 834                 if (num_ports == 0) {
 835                         dev_err(&interface->dev,
 836                             "Generic device with no bulk out, not allowed.\n");
 837                         kfree(serial);
 838                         return -EIO;
 839                 }
 840         }
 841 #endif
 842         if (!num_ports) {
 843                 /* if this device type has a calc_num_ports function, call it */
 844                 if (type->calc_num_ports) {
 845                         if (!try_module_get(type->driver.owner)) {
 846                                 dev_err(&interface->dev,
 847                                         "module get failed, exiting\n");
 848                                 kfree(serial);
 849                                 return -EIO;
 850                         }
 851                         num_ports = type->calc_num_ports(serial);
 852                         module_put(type->driver.owner);
 853                 }
 854                 if (!num_ports)
 855                         num_ports = type->num_ports;
 856         }
 857
 858         serial->num_ports = num_ports;
 859         serial->num_bulk_in = num_bulk_in;
 860         serial->num_bulk_out = num_bulk_out;
 861         serial->num_interrupt_in = num_interrupt_in;
 862         serial->num_interrupt_out = num_interrupt_out;
 863
 864         /* found all that we need */
 865         dev_info(&interface->dev, "%s converter detected\n",
 866                         type->description);
 867
 868         /* create our ports, we need as many as the max endpoints */
 869         /* we don't use num_ports here because some devices have more
 870            endpoint pairs than ports */
 871         max_endpoints = max(num_bulk_in, num_bulk_out);
 872         max_endpoints = max(max_endpoints, num_interrupt_in);
 873         max_endpoints = max(max_endpoints, num_interrupt_out);
 874         max_endpoints = max(max_endpoints, (int)serial->num_ports);
 875         serial->num_port_pointers = max_endpoints;
 876
 877         dbg("%s - setting up %d port structures for this device",
 878                                                 __func__, max_endpoints);
 879         for (i = 0; i < max_endpoints; ++i) {
 880                 port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
 881                 if (!port)
 882                         goto probe_error;
 883                 tty_port_init(&port->port);
 884                 port->port.ops = &serial_port_ops;
 885                 port->serial = serial;
 886                 spin_lock_init(&port->lock);
 887                 /* Keep this for private driver use for the moment but
 888                    should probably go away */
 889                 INIT_WORK(&port->work, usb_serial_port_work);
 890                 serial->port[i] = port;
 891                 port->dev.parent = &interface->dev;
 892                 port->dev.driver = NULL;
 893                 port->dev.bus = &usb_serial_bus_type;
 894                 port->dev.release = &port_release;
 895                 device_initialize(&port->dev);
 896         }
 897
 898         /* set up the endpoint information */
 899         for (i = 0; i < num_bulk_in; ++i) {
 900                 endpoint = bulk_in_endpoint[i];
 901                 port = serial->port[i];
 902                 port->read_urb = usb_alloc_urb(0, GFP_KERNEL);
 903                 if (!port->read_urb) {
 904                         dev_err(&interface->dev, "No free urbs available\n");
 905                         goto probe_error;
 906                 }
 907                 buffer_size = serial->type->bulk_in_size;
 908                 if (!buffer_size)
 909                         buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 910                 port->bulk_in_size = buffer_size;
 911                 port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
 912                 port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
 913                 if (!port->bulk_in_buffer) {
 914                         dev_err(&interface->dev,
 915                                         "Couldn't allocate bulk_in_buffer\n");
 916                         goto probe_error;
 917                 }
 918                 usb_fill_bulk_urb(port->read_urb, dev,
 919                                 usb_rcvbulkpipe(dev,
 920                                                 endpoint->bEndpointAddress),
 921                                 port->bulk_in_buffer, buffer_size,
 922                                 serial->type->read_bulk_callback, port);
 923         }
 924
 925         for (i = 0; i < num_bulk_out; ++i) {
 926                 int j;
 927
 928                 endpoint = bulk_out_endpoint[i];
 929                 port = serial->port[i];
 930                 port->write_urb = usb_alloc_urb(0, GFP_KERNEL);
 931                 if (!port->write_urb) {
 932                         dev_err(&interface->dev, "No free urbs available\n");
 933                         goto probe_error;
 934                 }
 935                 if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
 936                         goto probe_error;
 937                 buffer_size = serial->type->bulk_out_size;
 938                 if (!buffer_size)
 939                         buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 940                 port->bulk_out_size = buffer_size;
 941                 port->bulk_out_endpointAddress = endpoint->bEndpointAddress;
 942                 port->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
 943                 if (!port->bulk_out_buffer) {
 944                         dev_err(&interface->dev,
 945                                         "Couldn't allocate bulk_out_buffer\n");
 946                         goto probe_error;
 947                 }
 948                 usb_fill_bulk_urb(port->write_urb, dev,
 949                                 usb_sndbulkpipe(dev,
 950                                         endpoint->bEndpointAddress),
 951                                 port->bulk_out_buffer, buffer_size,
 952                                 serial->type->write_bulk_callback, port);
 953                 for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
 954                         set_bit(j, &port->write_urbs_free);
 955                         port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
 956                         if (!port->write_urbs[j]) {
 957                                 dev_err(&interface->dev,
 958                                                 "No free urbs available\n");
 959                                 goto probe_error;
 960                         }
 961                         port->bulk_out_buffers[j] = kmalloc(buffer_size,
 962                                                                 GFP_KERNEL);
 963                         if (!port->bulk_out_buffers[j]) {
 964                                 dev_err(&interface->dev,
 965                                         "Couldn't allocate bulk_out_buffer\n");
 966                                 goto probe_error;
 967                         }
 968                         usb_fill_bulk_urb(port->write_urbs[j], dev,
 969                                         usb_sndbulkpipe(dev,
 970                                                 endpoint->bEndpointAddress),
 971                                         port->bulk_out_buffers[j], buffer_size,
 972                                         serial->type->write_bulk_callback,
 973                                         port);
 974                 }
 975         }
 976
 977         if (serial->type->read_int_callback) {
 978                 for (i = 0; i < num_interrupt_in; ++i) {
 979                         endpoint = interrupt_in_endpoint[i];
 980                         port = serial->port[i];
 981                         port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
 982                         if (!port->interrupt_in_urb) {
 983                                 dev_err(&interface->dev,
 984                                                 "No free urbs available\n");
 985                                 goto probe_error;
 986                         }
 987                         buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 988                         port->interrupt_in_endpointAddress =
 989                                                 endpoint->bEndpointAddress;
 990                         port->interrupt_in_buffer = kmalloc(buffer_size,
 991                                                                 GFP_KERNEL);
 992                         if (!port->interrupt_in_buffer) {
 993                                 dev_err(&interface->dev,
 994                                     "Couldn't allocate interrupt_in_buffer\n");
 995                                 goto probe_error;
 996                         }
 997                         usb_fill_int_urb(port->interrupt_in_urb, dev,
 998                                 usb_rcvintpipe(dev,
 999                                                 endpoint->bEndpointAddress),
1000                                 port->interrupt_in_buffer, buffer_size,
1001                                 serial->type->read_int_callback, port,
1002                                 endpoint->bInterval);
1003                 }
1004         } else if (num_interrupt_in) {
1005                 dbg("the device claims to support interrupt in transfers, but read_int_callback is not defined");
1006         }
1007
1008         if (serial->type->write_int_callback) {
1009                 for (i = 0; i < num_interrupt_out; ++i) {
1010                         endpoint = interrupt_out_endpoint[i];
1011                         port = serial->port[i];
1012                         port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
1013                         if (!port->interrupt_out_urb) {
1014                                 dev_err(&interface->dev,
1015                                                 "No free urbs available\n");
1016                                 goto probe_error;
1017                         }
1018                         buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
1019                         port->interrupt_out_size = buffer_size;
1020                         port->interrupt_out_endpointAddress =
1021                                                 endpoint->bEndpointAddress;
1022                         port->interrupt_out_buffer = kmalloc(buffer_size,
1023                                                                 GFP_KERNEL);
1024                         if (!port->interrupt_out_buffer) {
1025                                 dev_err(&interface->dev,
1026                                   "Couldn't allocate interrupt_out_buffer\n");
1027                                 goto probe_error;
1028                         }
1029                         usb_fill_int_urb(port->interrupt_out_urb, dev,
1030                                 usb_sndintpipe(dev,
1031                                                   endpoint->bEndpointAddress),
1032                                 port->interrupt_out_buffer, buffer_size,
1033                                 serial->type->write_int_callback, port,
1034                                 endpoint->bInterval);
1035                 }
1036         } else if (num_interrupt_out) {
1037                 dbg("the device claims to support interrupt out transfers, but write_int_callback is not defined");
1038         }
1039
1040         /* if this device type has an attach function, call it */
1041         if (type->attach) {
1042                 if (!try_module_get(type->driver.owner)) {
1043                         dev_err(&interface->dev,
1044                                         "module get failed, exiting\n");
1045                         goto probe_error;
1046                 }
1047                 retval = type->attach(serial);
1048                 module_put(type->driver.owner);
1049                 if (retval < 0)
1050                         goto probe_error;
1051                 serial->attached = 1;
1052                 if (retval > 0) {
1053                         /* quietly accept this device, but don't bind to a
1054                            serial port as it's about to disappear */
1055                         serial->num_ports = 0;
1056                         goto exit;
1057                 }
1058         } else {
1059                 serial->attached = 1;
1060         }
1061
1062         if (get_free_serial(serial, num_ports, &minor) == NULL) {
1063                 dev_err(&interface->dev, "No more free serial devices\n");
1064                 goto probe_error;
1065         }
1066         serial->minor = minor;
1067
1068         /* register all of the individual ports with the driver core */
1069         for (i = 0; i < num_ports; ++i) {
1070                 port = serial->port[i];
1071                 dev_set_name(&port->dev, "ttyUSB%d", port->number);
1072                 dbg ("%s - registering %s", __func__, dev_name(&port->dev));
1073                 port->dev_state = PORT_REGISTERING;
1074                 device_enable_async_suspend(&port->dev);
1075
1076                 retval = device_add(&port->dev);
1077                 if (retval) {
1078                         dev_err(&port->dev, "Error registering port device, "
1079                                 "continuing\n");
1080                         port->dev_state = PORT_UNREGISTERED;
1081                 } else {
1082                         port->dev_state = PORT_REGISTERED;
1083                 }
1084         }
1085
1086         usb_serial_console_init(debug, minor);
1087
1088 exit:
1089         /* success */
1090         usb_set_intfdata(interface, serial);
1091         return 0;
1092
1093 probe_error:
1094         usb_serial_put(serial);
1095         return -EIO;
1096 }
1097 EXPORT_SYMBOL_GPL(usb_serial_probe);
1098
1099 void usb_serial_disconnect(struct usb_interface *interface)
1100 {
1101         int i;
1102         struct usb_serial *serial = usb_get_intfdata(interface);
1103         struct device *dev = &interface->dev;
1104         struct usb_serial_port *port;
1105
1106         usb_serial_console_disconnect(serial);
1107         dbg("%s", __func__);
1108
1109         mutex_lock(&serial->disc_mutex);
1110         usb_set_intfdata(interface, NULL);
1111         /* must set a flag, to signal subdrivers */
1112         serial->disconnected = 1;
1113         mutex_unlock(&serial->disc_mutex);
1114
1115         for (i = 0; i < serial->num_ports; ++i) {
1116                 port = serial->port[i];
1117                 if (port) {
1118                         struct tty_struct *tty = tty_port_tty_get(&port->port);
1119                         if (tty) {
1120                                 tty_vhangup(tty);
1121                                 tty_kref_put(tty);
1122                         }
1123                         kill_traffic(port);
1124                         cancel_work_sync(&port->work);
1125                         if (port->dev_state == PORT_REGISTERED) {
1126
1127                                 /* Make sure the port is bound so that the
1128                                  * driver's port_remove method is called.
1129                                  */
1130                                 if (!port->dev.driver) {
1131                                         int rc;
1132
1133                                         port->dev.driver =
1134                                                         &serial->type->driver;
1135                                         rc = device_bind_driver(&port->dev);
1136                                 }
1137                                 port->dev_state = PORT_UNREGISTERING;
1138                                 device_del(&port->dev);
1139                                 port->dev_state = PORT_UNREGISTERED;
1140                         }
1141                 }
1142         }
1143         serial->type->disconnect(serial);
1144
1145         /* let the last holder of this object cause it to be cleaned up */
1146         usb_serial_put(serial);
1147         dev_info(dev, "device disconnected\n");
1148 }
1149 EXPORT_SYMBOL_GPL(usb_serial_disconnect);
1150
1151 int usb_serial_suspend(struct usb_interface *intf, pm_message_t message)
1152 {
1153         struct usb_serial *serial = usb_get_intfdata(intf);
1154         struct usb_serial_port *port;
1155         int i, r = 0;
1156
1157         serial->suspending = 1;
1158
1159         if (serial->type->suspend) {
1160                 r = serial->type->suspend(serial, message);
1161                 if (r < 0) {
1162                         serial->suspending = 0;
1163                         goto err_out;
1164                 }
1165         }
1166
1167         for (i = 0; i < serial->num_ports; ++i) {
1168                 port = serial->port[i];
1169                 if (port)
1170                         kill_traffic(port);
1171         }
1172
1173 err_out:
1174         return r;
1175 }
1176 EXPORT_SYMBOL(usb_serial_suspend);
1177
1178 int usb_serial_resume(struct usb_interface *intf)
1179 {
1180         struct usb_serial *serial = usb_get_intfdata(intf);
1181         int rv;
1182
1183         serial->suspending = 0;
1184         if (serial->type->resume)
1185                 rv = serial->type->resume(serial);
1186         else
1187                 rv = usb_serial_generic_resume(serial);
1188
1189         return rv;
1190 }
1191 EXPORT_SYMBOL(usb_serial_resume);
1192
1193 static const struct tty_operations serial_ops = {
1194         .open =                 serial_open,
1195         .close =                serial_close,
1196         .write =                serial_write,
1197         .hangup =               serial_hangup,
1198         .write_room =           serial_write_room,
1199         .ioctl =                serial_ioctl,
1200         .set_termios =          serial_set_termios,
1201         .throttle =             serial_throttle,
1202         .unthrottle =           serial_unthrottle,
1203         .break_ctl =            serial_break,
1204         .chars_in_buffer =      serial_chars_in_buffer,
1205         .tiocmget =             serial_tiocmget,
1206         .tiocmset =             serial_tiocmset,
1207         .cleanup =              serial_cleanup,
1208         .install =              serial_install,
1209         .proc_fops =            &serial_proc_fops,
1210 };
1211
1212
1213 struct tty_driver *usb_serial_tty_driver;
1214
1215 static int __init usb_serial_init(void)
1216 {
1217         int i;
1218         int result;
1219
1220         usb_serial_tty_driver = alloc_tty_driver(SERIAL_TTY_MINORS);
1221         if (!usb_serial_tty_driver)
1222                 return -ENOMEM;
1223
1224         /* Initialize our global data */
1225         for (i = 0; i < SERIAL_TTY_MINORS; ++i)
1226                 serial_table[i] = NULL;
1227
1228         result = bus_register(&usb_serial_bus_type);
1229         if (result) {
1230                 printk(KERN_ERR "usb-serial: %s - registering bus driver "
1231                        "failed\n", __func__);
1232                 goto exit_bus;
1233         }
1234
1235         usb_serial_tty_driver->owner = THIS_MODULE;
1236         usb_serial_tty_driver->driver_name = "usbserial";
1237         usb_serial_tty_driver->name =   "ttyUSB";
1238         usb_serial_tty_driver->major = SERIAL_TTY_MAJOR;
1239         usb_serial_tty_driver->minor_start = 0;
1240         usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
1241         usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL;
1242         usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW |
1243                                                 TTY_DRIVER_DYNAMIC_DEV;
1244         usb_serial_tty_driver->init_termios = tty_std_termios;
1245         usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD
1246                                                         | HUPCL | CLOCAL;
1247         usb_serial_tty_driver->init_termios.c_ispeed = 9600;
1248         usb_serial_tty_driver->init_termios.c_ospeed = 9600;
1249         tty_set_operations(usb_serial_tty_driver, &serial_ops);
1250         result = tty_register_driver(usb_serial_tty_driver);
1251         if (result) {
1252                 printk(KERN_ERR "usb-serial: %s - tty_register_driver failed\n",
1253                        __func__);
1254                 goto exit_reg_driver;
1255         }
1256
1257         /* register the USB driver */
1258         result = usb_register(&usb_serial_driver);
1259         if (result < 0) {
1260                 printk(KERN_ERR "usb-serial: %s - usb_register failed\n",
1261                        __func__);
1262                 goto exit_tty;
1263         }
1264
1265         /* register the generic driver, if we should */
1266         result = usb_serial_generic_register(debug);
1267         if (result < 0) {
1268                 printk(KERN_ERR "usb-serial: %s - registering generic "
1269                        "driver failed\n", __func__);
1270                 goto exit_generic;
1271         }
1272
1273         printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
1274
1275         return result;
1276
1277 exit_generic:
1278         usb_deregister(&usb_serial_driver);
1279
1280 exit_tty:
1281         tty_unregister_driver(usb_serial_tty_driver);
1282
1283 exit_reg_driver:
1284         bus_unregister(&usb_serial_bus_type);
1285
1286 exit_bus:
1287         printk(KERN_ERR "usb-serial: %s - returning with error %d\n",
1288                __func__, result);
1289         put_tty_driver(usb_serial_tty_driver);
1290         return result;
1291 }
1292
1293
1294 static void __exit usb_serial_exit(void)
1295 {
1296         usb_serial_console_exit();
1297
1298         usb_serial_generic_deregister();
1299
1300         usb_deregister(&usb_serial_driver);
1301         tty_unregister_driver(usb_serial_tty_driver);
1302         put_tty_driver(usb_serial_tty_driver);
1303         bus_unregister(&usb_serial_bus_type);
1304 }
1305
1306
1307 module_init(usb_serial_init);
1308 module_exit(usb_serial_exit);
1309
1310 #define set_to_generic_if_null(type, function)                          \
1311         do {                                                            \
1312                 if (!type->function) {                                  \
1313                         type->function = usb_serial_generic_##function; \
1314                         dbg("Had to override the " #function            \
1315                                 " usb serial operation with the generic one.");\
1316                         }                                               \
1317         } while (0)
1318
1319 static void fixup_generic(struct usb_serial_driver *device)
1320 {
1321         set_to_generic_if_null(device, open);
1322         set_to_generic_if_null(device, write);
1323         set_to_generic_if_null(device, close);
1324         set_to_generic_if_null(device, write_room);
1325         set_to_generic_if_null(device, chars_in_buffer);
1326         set_to_generic_if_null(device, read_bulk_callback);
1327         set_to_generic_if_null(device, write_bulk_callback);
1328         set_to_generic_if_null(device, disconnect);
1329         set_to_generic_if_null(device, release);
1330         set_to_generic_if_null(device, process_read_urb);
1331         set_to_generic_if_null(device, prepare_write_buffer);
1332 }
1333
1334 int usb_serial_register(struct usb_serial_driver *driver)
1335 {
1336         /* must be called with BKL held */
1337         int retval;
1338
1339         if (usb_disabled())
1340                 return -ENODEV;
1341
1342         fixup_generic(driver);
1343
1344         if (!driver->description)
1345                 driver->description = driver->driver.name;
1346
1347         /* Add this device to our list of devices */
1348         mutex_lock(&table_lock);
1349         list_add(&driver->driver_list, &usb_serial_driver_list);
1350
1351         retval = usb_serial_bus_register(driver);
1352         if (retval) {
1353                 printk(KERN_ERR "usb-serial: problem %d when registering "
1354                        "driver %s\n", retval, driver->description);
1355                 list_del(&driver->driver_list);
1356         } else
1357                 printk(KERN_INFO "USB Serial support registered for %s\n",
1358                                                 driver->description);
1359
1360         mutex_unlock(&table_lock);
1361         return retval;
1362 }
1363 EXPORT_SYMBOL_GPL(usb_serial_register);
1364
1365
1366 void usb_serial_deregister(struct usb_serial_driver *device)
1367 {
1368         /* must be called with BKL held */
1369         printk(KERN_INFO "USB Serial deregistering driver %s\n",
1370                device->description);
1371         mutex_lock(&table_lock);
1372         list_del(&device->driver_list);
1373         usb_serial_bus_deregister(device);
1374         mutex_unlock(&table_lock);
1375 }
1376 EXPORT_SYMBOL_GPL(usb_serial_deregister);
1377
1378 /* Module information */
1379 MODULE_AUTHOR(DRIVER_AUTHOR);
1380 MODULE_DESCRIPTION(DRIVER_DESC);
1381 MODULE_LICENSE("GPL");
1382
1383 module_param(debug, bool, S_IRUGO | S_IWUSR);
1384 MODULE_PARM_DESC(debug, "Debug enabled or not");