drivers/gpu/drm/gma500/mdfld_dsi_output.c

   1 /*
   2  * Copyright © 2010 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  * jim liu <[email protected]>
  25  * Jackie Li<[email protected]>
  26  */
  27
  28 #include <linux/delay.h>
  29 #include <linux/moduleparam.h>
  30 #include <linux/pm_runtime.h>
  31 #include <linux/gpio/consumer.h>
  32
  33 #include <asm/intel_scu_ipc.h>
  34
  35 #include "mdfld_dsi_dpi.h"
  36 #include "mdfld_dsi_output.h"
  37 #include "mdfld_dsi_pkg_sender.h"
  38 #include "mdfld_output.h"
  39 #include "tc35876x-dsi-lvds.h"
  40
  41 /* get the LABC from command line. */
  42 static int LABC_control = 1;
  43
  44 #ifdef MODULE
  45 module_param(LABC_control, int, 0644);
  46 #else
  47
  48 static int __init parse_LABC_control(char *arg)
  49 {
  50         /* LABC control can be passed in as a cmdline parameter */
  51         /* to enable this feature add LABC=1 to cmdline */
  52         /* to disable this feature add LABC=0 to cmdline */
  53         if (!arg)
  54                 return -EINVAL;
  55
  56         if (!strcasecmp(arg, "0"))
  57                 LABC_control = 0;
  58         else if (!strcasecmp(arg, "1"))
  59                 LABC_control = 1;
  60
  61         return 0;
  62 }
  63 early_param("LABC", parse_LABC_control);
  64 #endif
  65
  66 /**
  67  * Check and see if the generic control or data buffer is empty and ready.
  68  */
  69 void mdfld_dsi_gen_fifo_ready(struct drm_device *dev, u32 gen_fifo_stat_reg,
  70                                                         u32 fifo_stat)
  71 {
  72         u32 GEN_BF_time_out_count;
  73
  74         /* Check MIPI Adatper command registers */
  75         for (GEN_BF_time_out_count = 0;
  76                         GEN_BF_time_out_count < GEN_FB_TIME_OUT;
  77                         GEN_BF_time_out_count++) {
  78                 if ((REG_READ(gen_fifo_stat_reg) & fifo_stat) == fifo_stat)
  79                         break;
  80                 udelay(100);
  81         }
  82
  83         if (GEN_BF_time_out_count == GEN_FB_TIME_OUT)
  84                 DRM_ERROR("mdfld_dsi_gen_fifo_ready, Timeout. gen_fifo_stat_reg = 0x%x.\n",
  85                                         gen_fifo_stat_reg);
  86 }
  87
  88 /**
  89  * Manage the DSI MIPI keyboard and display brightness.
  90  * FIXME: this is exported to OSPM code. should work out an specific
  91  * display interface to OSPM.
  92  */
  93
  94 void mdfld_dsi_brightness_init(struct mdfld_dsi_config *dsi_config, int pipe)
  95 {
  96         struct mdfld_dsi_pkg_sender *sender =
  97                                 mdfld_dsi_get_pkg_sender(dsi_config);
  98         struct drm_device *dev;
  99         struct drm_psb_private *dev_priv;
 100         u32 gen_ctrl_val;
 101
 102         if (!sender) {
 103                 DRM_ERROR("No sender found\n");
 104                 return;
 105         }
 106
 107         dev = sender->dev;
 108         dev_priv = dev->dev_private;
 109
 110         /* Set default display backlight value to 85% (0xd8)*/
 111         mdfld_dsi_send_mcs_short(sender, write_display_brightness, 0xd8, 1,
 112                                 true);
 113
 114         /* Set minimum brightness setting of CABC function to 20% (0x33)*/
 115         mdfld_dsi_send_mcs_short(sender, write_cabc_min_bright, 0x33, 1, true);
 116
 117         /* Enable backlight or/and LABC */
 118         gen_ctrl_val = BRIGHT_CNTL_BLOCK_ON | DISPLAY_DIMMING_ON |
 119                                                                 BACKLIGHT_ON;
 120         if (LABC_control == 1)
 121                 gen_ctrl_val |= DISPLAY_DIMMING_ON | DISPLAY_BRIGHTNESS_AUTO
 122                                                                 | GAMMA_AUTO;
 123
 124         if (LABC_control == 1)
 125                 gen_ctrl_val |= AMBIENT_LIGHT_SENSE_ON;
 126
 127         dev_priv->mipi_ctrl_display = gen_ctrl_val;
 128
 129         mdfld_dsi_send_mcs_short(sender, write_ctrl_display, (u8)gen_ctrl_val,
 130                                 1, true);
 131
 132         mdfld_dsi_send_mcs_short(sender, write_ctrl_cabc, UI_IMAGE, 1, true);
 133 }
 134
 135 void mdfld_dsi_brightness_control(struct drm_device *dev, int pipe, int level)
 136 {
 137         struct mdfld_dsi_pkg_sender *sender;
 138         struct drm_psb_private *dev_priv;
 139         struct mdfld_dsi_config *dsi_config;
 140         u32 gen_ctrl_val = 0;
 141         int p_type = TMD_VID;
 142
 143         if (!dev || (pipe != 0 && pipe != 2)) {
 144                 DRM_ERROR("Invalid parameter\n");
 145                 return;
 146         }
 147
 148         p_type = mdfld_get_panel_type(dev, 0);
 149
 150         dev_priv = dev->dev_private;
 151
 152         if (pipe)
 153                 dsi_config = dev_priv->dsi_configs[1];
 154         else
 155                 dsi_config = dev_priv->dsi_configs[0];
 156
 157         sender = mdfld_dsi_get_pkg_sender(dsi_config);
 158
 159         if (!sender) {
 160                 DRM_ERROR("No sender found\n");
 161                 return;
 162         }
 163
 164         gen_ctrl_val = (level * 0xff / MDFLD_DSI_BRIGHTNESS_MAX_LEVEL) & 0xff;
 165
 166         dev_dbg(sender->dev->dev, "pipe = %d, gen_ctrl_val = %d.\n",
 167                                                         pipe, gen_ctrl_val);
 168
 169         if (p_type == TMD_VID) {
 170                 /* Set display backlight value */
 171                 mdfld_dsi_send_mcs_short(sender, tmd_write_display_brightness,
 172                                         (u8)gen_ctrl_val, 1, true);
 173         } else {
 174                 /* Set display backlight value */
 175                 mdfld_dsi_send_mcs_short(sender, write_display_brightness,
 176                                         (u8)gen_ctrl_val, 1, true);
 177
 178                 /* Enable backlight control */
 179                 if (level == 0)
 180                         gen_ctrl_val = 0;
 181                 else
 182                         gen_ctrl_val = dev_priv->mipi_ctrl_display;
 183
 184                 mdfld_dsi_send_mcs_short(sender, write_ctrl_display,
 185                                         (u8)gen_ctrl_val, 1, true);
 186         }
 187 }
 188
 189 static int mdfld_dsi_get_panel_status(struct mdfld_dsi_config *dsi_config,
 190                                 u8 dcs, u32 *data, bool hs)
 191 {
 192         struct mdfld_dsi_pkg_sender *sender
 193                 = mdfld_dsi_get_pkg_sender(dsi_config);
 194
 195         if (!sender || !data) {
 196                 DRM_ERROR("Invalid parameter\n");
 197                 return -EINVAL;
 198         }
 199
 200         return mdfld_dsi_read_mcs(sender, dcs, data, 1, hs);
 201 }
 202
 203 int mdfld_dsi_get_power_mode(struct mdfld_dsi_config *dsi_config, u32 *mode,
 204                         bool hs)
 205 {
 206         if (!dsi_config || !mode) {
 207                 DRM_ERROR("Invalid parameter\n");
 208                 return -EINVAL;
 209         }
 210
 211         return mdfld_dsi_get_panel_status(dsi_config, 0x0a, mode, hs);
 212 }
 213
 214 /*
 215  * NOTE: this function was used by OSPM.
 216  * TODO: will be removed later, should work out display interfaces for OSPM
 217  */
 218 void mdfld_dsi_controller_init(struct mdfld_dsi_config *dsi_config, int pipe)
 219 {
 220         if (!dsi_config || ((pipe != 0) && (pipe != 2))) {
 221                 DRM_ERROR("Invalid parameters\n");
 222                 return;
 223         }
 224
 225         mdfld_dsi_dpi_controller_init(dsi_config, pipe);
 226 }
 227
 228 static void mdfld_dsi_connector_save(struct drm_connector *connector)
 229 {
 230 }
 231
 232 static void mdfld_dsi_connector_restore(struct drm_connector *connector)
 233 {
 234 }
 235
 236 /* FIXME: start using the force parameter */
 237 static enum drm_connector_status
 238 mdfld_dsi_connector_detect(struct drm_connector *connector, bool force)
 239 {
 240         struct mdfld_dsi_connector *dsi_connector
 241                 = mdfld_dsi_connector(connector);
 242
 243         dsi_connector->status = connector_status_connected;
 244
 245         return dsi_connector->status;
 246 }
 247
 248 static int mdfld_dsi_connector_set_property(struct drm_connector *connector,
 249                                 struct drm_property *property,
 250                                 uint64_t value)
 251 {
 252         struct drm_encoder *encoder = connector->encoder;
 253
 254         if (!strcmp(property->name, "scaling mode") && encoder) {
 255                 struct gma_crtc *gma_crtc = to_gma_crtc(encoder->crtc);
 256                 bool centerechange;
 257                 uint64_t val;
 258
 259                 if (!gma_crtc)
 260                         goto set_prop_error;
 261
 262                 switch (value) {
 263                 case DRM_MODE_SCALE_FULLSCREEN:
 264                         break;
 265                 case DRM_MODE_SCALE_NO_SCALE:
 266                         break;
 267                 case DRM_MODE_SCALE_ASPECT:
 268                         break;
 269                 default:
 270                         goto set_prop_error;
 271                 }
 272
 273                 if (drm_object_property_get_value(&connector->base, property, &val))
 274                         goto set_prop_error;
 275
 276                 if (val == value)
 277                         goto set_prop_done;
 278
 279                 if (drm_object_property_set_value(&connector->base,
 280                                                         property, value))
 281                         goto set_prop_error;
 282
 283                 centerechange = (val == DRM_MODE_SCALE_NO_SCALE) ||
 284                         (value == DRM_MODE_SCALE_NO_SCALE);
 285
 286                 if (gma_crtc->saved_mode.hdisplay != 0 &&
 287                     gma_crtc->saved_mode.vdisplay != 0) {
 288                         if (centerechange) {
 289                                 if (!drm_crtc_helper_set_mode(encoder->crtc,
 290                                                 &gma_crtc->saved_mode,
 291                                                 encoder->crtc->x,
 292                                                 encoder->crtc->y,
 293                                                 encoder->crtc->primary->fb))
 294                                         goto set_prop_error;
 295                         } else {
 296                                 const struct drm_encoder_helper_funcs *funcs =
 297                                                 encoder->helper_private;
 298                                 funcs->mode_set(encoder,
 299                                         &gma_crtc->saved_mode,
 300                                         &gma_crtc->saved_adjusted_mode);
 301                         }
 302                 }
 303         } else if (!strcmp(property->name, "backlight") && encoder) {
 304                 if (drm_object_property_set_value(&connector->base, property,
 305                                                                         value))
 306                         goto set_prop_error;
 307                 else
 308                         gma_backlight_set(encoder->dev, value);
 309         }
 310 set_prop_done:
 311         return 0;
 312 set_prop_error:
 313         return -1;
 314 }
 315
 316 static void mdfld_dsi_connector_destroy(struct drm_connector *connector)
 317 {
 318         struct mdfld_dsi_connector *dsi_connector =
 319                                         mdfld_dsi_connector(connector);
 320         struct mdfld_dsi_pkg_sender *sender;
 321
 322         if (!dsi_connector)
 323                 return;
 324         drm_connector_unregister(connector);
 325         drm_connector_cleanup(connector);
 326         sender = dsi_connector->pkg_sender;
 327         mdfld_dsi_pkg_sender_destroy(sender);
 328         kfree(dsi_connector);
 329 }
 330
 331 static int mdfld_dsi_connector_get_modes(struct drm_connector *connector)
 332 {
 333         struct mdfld_dsi_connector *dsi_connector =
 334                                 mdfld_dsi_connector(connector);
 335         struct mdfld_dsi_config *dsi_config =
 336                                 mdfld_dsi_get_config(dsi_connector);
 337         struct drm_display_mode *fixed_mode = dsi_config->fixed_mode;
 338         struct drm_display_mode *dup_mode = NULL;
 339         struct drm_device *dev = connector->dev;
 340
 341         if (fixed_mode) {
 342                 dev_dbg(dev->dev, "fixed_mode %dx%d\n",
 343                                 fixed_mode->hdisplay, fixed_mode->vdisplay);
 344                 dup_mode = drm_mode_duplicate(dev, fixed_mode);
 345                 drm_mode_probed_add(connector, dup_mode);
 346                 return 1;
 347         }
 348         DRM_ERROR("Didn't get any modes!\n");
 349         return 0;
 350 }
 351
 352 static enum drm_mode_status mdfld_dsi_connector_mode_valid(struct drm_connector *connector,
 353                                                 struct drm_display_mode *mode)
 354 {
 355         struct mdfld_dsi_connector *dsi_connector =
 356                                         mdfld_dsi_connector(connector);
 357         struct mdfld_dsi_config *dsi_config =
 358                                         mdfld_dsi_get_config(dsi_connector);
 359         struct drm_display_mode *fixed_mode = dsi_config->fixed_mode;
 360
 361         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 362                 return MODE_NO_DBLESCAN;
 363
 364         if (mode->flags & DRM_MODE_FLAG_INTERLACE)
 365                 return MODE_NO_INTERLACE;
 366
 367         /**
 368          * FIXME: current DC has no fitting unit, reject any mode setting
 369          * request
 370          * Will figure out a way to do up-scaling(panel fitting) later.
 371          **/
 372         if (fixed_mode) {
 373                 if (mode->hdisplay != fixed_mode->hdisplay)
 374                         return MODE_PANEL;
 375
 376                 if (mode->vdisplay != fixed_mode->vdisplay)
 377                         return MODE_PANEL;
 378         }
 379
 380         return MODE_OK;
 381 }
 382
 383 static struct drm_encoder *mdfld_dsi_connector_best_encoder(
 384                                 struct drm_connector *connector)
 385 {
 386         struct mdfld_dsi_connector *dsi_connector =
 387                                 mdfld_dsi_connector(connector);
 388         struct mdfld_dsi_config *dsi_config =
 389                                 mdfld_dsi_get_config(dsi_connector);
 390         return &dsi_config->encoder->base.base;
 391 }
 392
 393 /*DSI connector funcs*/
 394 static const struct drm_connector_funcs mdfld_dsi_connector_funcs = {
 395         .dpms = drm_helper_connector_dpms,
 396         .detect = mdfld_dsi_connector_detect,
 397         .fill_modes = drm_helper_probe_single_connector_modes,
 398         .set_property = mdfld_dsi_connector_set_property,
 399         .destroy = mdfld_dsi_connector_destroy,
 400 };
 401
 402 /*DSI connector helper funcs*/
 403 static const struct drm_connector_helper_funcs
 404         mdfld_dsi_connector_helper_funcs = {
 405         .get_modes = mdfld_dsi_connector_get_modes,
 406         .mode_valid = mdfld_dsi_connector_mode_valid,
 407         .best_encoder = mdfld_dsi_connector_best_encoder,
 408 };
 409
 410 static int mdfld_dsi_get_default_config(struct drm_device *dev,
 411                                 struct mdfld_dsi_config *config, int pipe)
 412 {
 413         if (!dev || !config) {
 414                 DRM_ERROR("Invalid parameters");
 415                 return -EINVAL;
 416         }
 417
 418         config->bpp = 24;
 419         if (mdfld_get_panel_type(dev, pipe) == TC35876X)
 420                 config->lane_count = 4;
 421         else
 422                 config->lane_count = 2;
 423         config->channel_num = 0;
 424
 425         if (mdfld_get_panel_type(dev, pipe) == TMD_VID)
 426                 config->video_mode = MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_PULSE;
 427         else if (mdfld_get_panel_type(dev, pipe) == TC35876X)
 428                 config->video_mode =
 429                                 MDFLD_DSI_VIDEO_NON_BURST_MODE_SYNC_EVENTS;
 430         else
 431                 config->video_mode = MDFLD_DSI_VIDEO_BURST_MODE;
 432
 433         return 0;
 434 }
 435
 436 int mdfld_dsi_panel_reset(struct drm_device *ddev, int pipe)
 437 {
 438         struct device *dev = ddev->dev;
 439         struct gpio_desc *gpiod;
 440
 441         /*
 442          * Raise the GPIO reset line for the corresponding pipe to HIGH,
 443          * this is probably because it is active low so this takes the
 444          * respective pipe out of reset. (We have no code to put it back
 445          * into reset in this driver.)
 446          */
 447         switch (pipe) {
 448         case 0:
 449                 gpiod = gpiod_get(dev, "dsi-pipe0-reset", GPIOD_OUT_HIGH);
 450                 if (IS_ERR(gpiod))
 451                         return PTR_ERR(gpiod);
 452                 break;
 453         case 2:
 454                 gpiod = gpiod_get(dev, "dsi-pipe2-reset", GPIOD_OUT_HIGH);
 455                 if (IS_ERR(gpiod))
 456                         return PTR_ERR(gpiod);
 457                 break;
 458         default:
 459                 DRM_DEV_ERROR(dev, "Invalid output pipe\n");
 460                 return -EINVAL;
 461         }
 462         gpiod_put(gpiod);
 463
 464         /* Flush posted writes on the device */
 465         gpiod = gpiod_get(dev, "dsi-pipe0-reset", GPIOD_ASIS);
 466         if (IS_ERR(gpiod))
 467                 return PTR_ERR(gpiod);
 468         gpiod_get_value(gpiod);
 469         gpiod_put(gpiod);
 470
 471         return 0;
 472 }
 473
 474 /*
 475  * MIPI output init
 476  * @dev drm device
 477  * @pipe pipe number. 0 or 2
 478  * @config
 479  *
 480  * Do the initialization of a MIPI output, including create DRM mode objects
 481  * initialization of DSI output on @pipe
 482  */
 483 void mdfld_dsi_output_init(struct drm_device *dev,
 484                            int pipe,
 485                            const struct panel_funcs *p_vid_funcs)
 486 {
 487         struct mdfld_dsi_config *dsi_config;
 488         struct mdfld_dsi_connector *dsi_connector;
 489         struct drm_connector *connector;
 490         struct mdfld_dsi_encoder *encoder;
 491         struct drm_psb_private *dev_priv = dev->dev_private;
 492         struct panel_info dsi_panel_info;
 493         u32 width_mm, height_mm;
 494
 495         dev_dbg(dev->dev, "init DSI output on pipe %d\n", pipe);
 496
 497         if (pipe != 0 && pipe != 2) {
 498                 DRM_ERROR("Invalid parameter\n");
 499                 return;
 500         }
 501
 502         /*create a new connector*/
 503         dsi_connector = kzalloc(sizeof(struct mdfld_dsi_connector), GFP_KERNEL);
 504         if (!dsi_connector) {
 505                 DRM_ERROR("No memory");
 506                 return;
 507         }
 508
 509         dsi_connector->pipe =  pipe;
 510
 511         dsi_config = kzalloc(sizeof(struct mdfld_dsi_config),
 512                         GFP_KERNEL);
 513         if (!dsi_config) {
 514                 DRM_ERROR("cannot allocate memory for DSI config\n");
 515                 goto dsi_init_err0;
 516         }
 517         mdfld_dsi_get_default_config(dev, dsi_config, pipe);
 518
 519         dsi_connector->private = dsi_config;
 520
 521         dsi_config->changed = 1;
 522         dsi_config->dev = dev;
 523
 524         dsi_config->fixed_mode = p_vid_funcs->get_config_mode(dev);
 525         if (p_vid_funcs->get_panel_info(dev, pipe, &dsi_panel_info))
 526                         goto dsi_init_err0;
 527
 528         width_mm = dsi_panel_info.width_mm;
 529         height_mm = dsi_panel_info.height_mm;
 530
 531         dsi_config->mode = dsi_config->fixed_mode;
 532         dsi_config->connector = dsi_connector;
 533
 534         if (!dsi_config->fixed_mode) {
 535                 DRM_ERROR("No panel fixed mode was found\n");
 536                 goto dsi_init_err0;
 537         }
 538
 539         if (pipe && dev_priv->dsi_configs[0]) {
 540                 dsi_config->dvr_ic_inited = 0;
 541                 dev_priv->dsi_configs[1] = dsi_config;
 542         } else if (pipe == 0) {
 543                 dsi_config->dvr_ic_inited = 1;
 544                 dev_priv->dsi_configs[0] = dsi_config;
 545         } else {
 546                 DRM_ERROR("Trying to init MIPI1 before MIPI0\n");
 547                 goto dsi_init_err0;
 548         }
 549
 550
 551         connector = &dsi_connector->base.base;
 552         dsi_connector->base.save = mdfld_dsi_connector_save;
 553         dsi_connector->base.restore = mdfld_dsi_connector_restore;
 554
 555         drm_connector_init(dev, connector, &mdfld_dsi_connector_funcs,
 556                                                 DRM_MODE_CONNECTOR_LVDS);
 557         drm_connector_helper_add(connector, &mdfld_dsi_connector_helper_funcs);
 558
 559         connector->display_info.subpixel_order = SubPixelHorizontalRGB;
 560         connector->display_info.width_mm = width_mm;
 561         connector->display_info.height_mm = height_mm;
 562         connector->interlace_allowed = false;
 563         connector->doublescan_allowed = false;
 564
 565         /*attach properties*/
 566         drm_object_attach_property(&connector->base,
 567                                 dev->mode_config.scaling_mode_property,
 568                                 DRM_MODE_SCALE_FULLSCREEN);
 569         drm_object_attach_property(&connector->base,
 570                                 dev_priv->backlight_property,
 571                                 MDFLD_DSI_BRIGHTNESS_MAX_LEVEL);
 572
 573         /*init DSI package sender on this output*/
 574         if (mdfld_dsi_pkg_sender_init(dsi_connector, pipe)) {
 575                 DRM_ERROR("Package Sender initialization failed on pipe %d\n",
 576                                                                         pipe);
 577                 goto dsi_init_err0;
 578         }
 579
 580         encoder = mdfld_dsi_dpi_init(dev, dsi_connector, p_vid_funcs);
 581         if (!encoder) {
 582                 DRM_ERROR("Create DPI encoder failed\n");
 583                 goto dsi_init_err1;
 584         }
 585         encoder->private = dsi_config;
 586         dsi_config->encoder = encoder;
 587         encoder->base.type = (pipe == 0) ? INTEL_OUTPUT_MIPI :
 588                 INTEL_OUTPUT_MIPI2;
 589         drm_connector_register(connector);
 590         return;
 591
 592         /*TODO: add code to destroy outputs on error*/
 593 dsi_init_err1:
 594         /*destroy sender*/
 595         mdfld_dsi_pkg_sender_destroy(dsi_connector->pkg_sender);
 596
 597         drm_connector_cleanup(connector);
 598
 599         kfree(dsi_config->fixed_mode);
 600         kfree(dsi_config);
 601 dsi_init_err0:
 602         kfree(dsi_connector);
 603 }