drivers/tty/serial/pch_uart.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
   4  */
   5 #include <linux/kernel.h>
   6 #include <linux/serial.h>
   7 #include <linux/serial_reg.h>
   8 #include <linux/slab.h>
   9 #include <linux/module.h>
  10 #include <linux/pci.h>
  11 #include <linux/console.h>
  12 #include <linux/serial_core.h>
  13 #include <linux/tty.h>
  14 #include <linux/tty_flip.h>
  15 #include <linux/interrupt.h>
  16 #include <linux/io.h>
  17 #include <linux/dmi.h>
  18 #include <linux/nmi.h>
  19 #include <linux/delay.h>
  20 #include <linux/of.h>
  21
  22 #include <linux/debugfs.h>
  23 #include <linux/dmaengine.h>
  24 #include <linux/pch_dma.h>
  25
  26 enum {
  27         PCH_UART_HANDLED_RX_INT_SHIFT,
  28         PCH_UART_HANDLED_TX_INT_SHIFT,
  29         PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
  30         PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
  31         PCH_UART_HANDLED_MS_INT_SHIFT,
  32         PCH_UART_HANDLED_LS_INT_SHIFT,
  33 };
  34
  35 #define PCH_UART_DRIVER_DEVICE "ttyPCH"
  36
  37 /* Set the max number of UART port
  38  * Intel EG20T PCH: 4 port
  39  * LAPIS Semiconductor ML7213 IOH: 3 port
  40  * LAPIS Semiconductor ML7223 IOH: 2 port
  41 */
  42 #define PCH_UART_NR     4
  43
  44 #define PCH_UART_HANDLED_RX_INT (1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
  45 #define PCH_UART_HANDLED_TX_INT (1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
  46 #define PCH_UART_HANDLED_RX_ERR_INT     (1<<((\
  47                                         PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1))
  48 #define PCH_UART_HANDLED_RX_TRG_INT     (1<<((\
  49                                         PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
  50 #define PCH_UART_HANDLED_MS_INT (1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
  51
  52 #define PCH_UART_HANDLED_LS_INT (1<<((PCH_UART_HANDLED_LS_INT_SHIFT)<<1))
  53
  54 #define PCH_UART_RBR            0x00
  55 #define PCH_UART_THR            0x00
  56
  57 #define PCH_UART_IER_MASK       (PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\
  58                                 PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI)
  59 #define PCH_UART_IER_ERBFI      0x00000001
  60 #define PCH_UART_IER_ETBEI      0x00000002
  61 #define PCH_UART_IER_ELSI       0x00000004
  62 #define PCH_UART_IER_EDSSI      0x00000008
  63
  64 #define PCH_UART_IIR_IP                 0x00000001
  65 #define PCH_UART_IIR_IID                0x00000006
  66 #define PCH_UART_IIR_MSI                0x00000000
  67 #define PCH_UART_IIR_TRI                0x00000002
  68 #define PCH_UART_IIR_RRI                0x00000004
  69 #define PCH_UART_IIR_REI                0x00000006
  70 #define PCH_UART_IIR_TOI                0x00000008
  71 #define PCH_UART_IIR_FIFO256            0x00000020
  72 #define PCH_UART_IIR_FIFO64             PCH_UART_IIR_FIFO256
  73 #define PCH_UART_IIR_FE                 0x000000C0
  74
  75 #define PCH_UART_FCR_FIFOE              0x00000001
  76 #define PCH_UART_FCR_RFR                0x00000002
  77 #define PCH_UART_FCR_TFR                0x00000004
  78 #define PCH_UART_FCR_DMS                0x00000008
  79 #define PCH_UART_FCR_FIFO256            0x00000020
  80 #define PCH_UART_FCR_RFTL               0x000000C0
  81
  82 #define PCH_UART_FCR_RFTL1              0x00000000
  83 #define PCH_UART_FCR_RFTL64             0x00000040
  84 #define PCH_UART_FCR_RFTL128            0x00000080
  85 #define PCH_UART_FCR_RFTL224            0x000000C0
  86 #define PCH_UART_FCR_RFTL16             PCH_UART_FCR_RFTL64
  87 #define PCH_UART_FCR_RFTL32             PCH_UART_FCR_RFTL128
  88 #define PCH_UART_FCR_RFTL56             PCH_UART_FCR_RFTL224
  89 #define PCH_UART_FCR_RFTL4              PCH_UART_FCR_RFTL64
  90 #define PCH_UART_FCR_RFTL8              PCH_UART_FCR_RFTL128
  91 #define PCH_UART_FCR_RFTL14             PCH_UART_FCR_RFTL224
  92 #define PCH_UART_FCR_RFTL_SHIFT         6
  93
  94 #define PCH_UART_LCR_WLS        0x00000003
  95 #define PCH_UART_LCR_STB        0x00000004
  96 #define PCH_UART_LCR_PEN        0x00000008
  97 #define PCH_UART_LCR_EPS        0x00000010
  98 #define PCH_UART_LCR_SP         0x00000020
  99 #define PCH_UART_LCR_SB         0x00000040
 100 #define PCH_UART_LCR_DLAB       0x00000080
 101 #define PCH_UART_LCR_NP         0x00000000
 102 #define PCH_UART_LCR_OP         PCH_UART_LCR_PEN
 103 #define PCH_UART_LCR_EP         (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS)
 104 #define PCH_UART_LCR_1P         (PCH_UART_LCR_PEN | PCH_UART_LCR_SP)
 105 #define PCH_UART_LCR_0P         (PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\
 106                                 PCH_UART_LCR_SP)
 107
 108 #define PCH_UART_LCR_5BIT       0x00000000
 109 #define PCH_UART_LCR_6BIT       0x00000001
 110 #define PCH_UART_LCR_7BIT       0x00000002
 111 #define PCH_UART_LCR_8BIT       0x00000003
 112
 113 #define PCH_UART_MCR_DTR        0x00000001
 114 #define PCH_UART_MCR_RTS        0x00000002
 115 #define PCH_UART_MCR_OUT        0x0000000C
 116 #define PCH_UART_MCR_LOOP       0x00000010
 117 #define PCH_UART_MCR_AFE        0x00000020
 118
 119 #define PCH_UART_LSR_DR         0x00000001
 120 #define PCH_UART_LSR_ERR        (1<<7)
 121
 122 #define PCH_UART_MSR_DCTS       0x00000001
 123 #define PCH_UART_MSR_DDSR       0x00000002
 124 #define PCH_UART_MSR_TERI       0x00000004
 125 #define PCH_UART_MSR_DDCD       0x00000008
 126 #define PCH_UART_MSR_CTS        0x00000010
 127 #define PCH_UART_MSR_DSR        0x00000020
 128 #define PCH_UART_MSR_RI         0x00000040
 129 #define PCH_UART_MSR_DCD        0x00000080
 130 #define PCH_UART_MSR_DELTA      (PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\
 131                                 PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD)
 132
 133 #define PCH_UART_DLL            0x00
 134 #define PCH_UART_DLM            0x01
 135
 136 #define PCH_UART_BRCSR          0x0E
 137
 138 #define PCH_UART_IID_RLS        (PCH_UART_IIR_REI)
 139 #define PCH_UART_IID_RDR        (PCH_UART_IIR_RRI)
 140 #define PCH_UART_IID_RDR_TO     (PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
 141 #define PCH_UART_IID_THRE       (PCH_UART_IIR_TRI)
 142 #define PCH_UART_IID_MS         (PCH_UART_IIR_MSI)
 143
 144 #define PCH_UART_HAL_PARITY_NONE        (PCH_UART_LCR_NP)
 145 #define PCH_UART_HAL_PARITY_ODD         (PCH_UART_LCR_OP)
 146 #define PCH_UART_HAL_PARITY_EVEN        (PCH_UART_LCR_EP)
 147 #define PCH_UART_HAL_PARITY_FIX1        (PCH_UART_LCR_1P)
 148 #define PCH_UART_HAL_PARITY_FIX0        (PCH_UART_LCR_0P)
 149 #define PCH_UART_HAL_5BIT               (PCH_UART_LCR_5BIT)
 150 #define PCH_UART_HAL_6BIT               (PCH_UART_LCR_6BIT)
 151 #define PCH_UART_HAL_7BIT               (PCH_UART_LCR_7BIT)
 152 #define PCH_UART_HAL_8BIT               (PCH_UART_LCR_8BIT)
 153 #define PCH_UART_HAL_STB1               0
 154 #define PCH_UART_HAL_STB2               (PCH_UART_LCR_STB)
 155
 156 #define PCH_UART_HAL_CLR_TX_FIFO        (PCH_UART_FCR_TFR)
 157 #define PCH_UART_HAL_CLR_RX_FIFO        (PCH_UART_FCR_RFR)
 158 #define PCH_UART_HAL_CLR_ALL_FIFO       (PCH_UART_HAL_CLR_TX_FIFO | \
 159                                         PCH_UART_HAL_CLR_RX_FIFO)
 160
 161 #define PCH_UART_HAL_DMA_MODE0          0
 162 #define PCH_UART_HAL_FIFO_DIS           0
 163 #define PCH_UART_HAL_FIFO16             (PCH_UART_FCR_FIFOE)
 164 #define PCH_UART_HAL_FIFO256            (PCH_UART_FCR_FIFOE | \
 165                                         PCH_UART_FCR_FIFO256)
 166 #define PCH_UART_HAL_FIFO64             (PCH_UART_HAL_FIFO256)
 167 #define PCH_UART_HAL_TRIGGER1           (PCH_UART_FCR_RFTL1)
 168 #define PCH_UART_HAL_TRIGGER64          (PCH_UART_FCR_RFTL64)
 169 #define PCH_UART_HAL_TRIGGER128         (PCH_UART_FCR_RFTL128)
 170 #define PCH_UART_HAL_TRIGGER224         (PCH_UART_FCR_RFTL224)
 171 #define PCH_UART_HAL_TRIGGER16          (PCH_UART_FCR_RFTL16)
 172 #define PCH_UART_HAL_TRIGGER32          (PCH_UART_FCR_RFTL32)
 173 #define PCH_UART_HAL_TRIGGER56          (PCH_UART_FCR_RFTL56)
 174 #define PCH_UART_HAL_TRIGGER4           (PCH_UART_FCR_RFTL4)
 175 #define PCH_UART_HAL_TRIGGER8           (PCH_UART_FCR_RFTL8)
 176 #define PCH_UART_HAL_TRIGGER14          (PCH_UART_FCR_RFTL14)
 177 #define PCH_UART_HAL_TRIGGER_L          (PCH_UART_FCR_RFTL64)
 178 #define PCH_UART_HAL_TRIGGER_M          (PCH_UART_FCR_RFTL128)
 179 #define PCH_UART_HAL_TRIGGER_H          (PCH_UART_FCR_RFTL224)
 180
 181 #define PCH_UART_HAL_RX_INT             (PCH_UART_IER_ERBFI)
 182 #define PCH_UART_HAL_TX_INT             (PCH_UART_IER_ETBEI)
 183 #define PCH_UART_HAL_RX_ERR_INT         (PCH_UART_IER_ELSI)
 184 #define PCH_UART_HAL_MS_INT             (PCH_UART_IER_EDSSI)
 185 #define PCH_UART_HAL_ALL_INT            (PCH_UART_IER_MASK)
 186
 187 #define PCH_UART_HAL_DTR                (PCH_UART_MCR_DTR)
 188 #define PCH_UART_HAL_RTS                (PCH_UART_MCR_RTS)
 189 #define PCH_UART_HAL_OUT                (PCH_UART_MCR_OUT)
 190 #define PCH_UART_HAL_LOOP               (PCH_UART_MCR_LOOP)
 191 #define PCH_UART_HAL_AFE                (PCH_UART_MCR_AFE)
 192
 193 #define DEFAULT_UARTCLK   1843200 /*   1.8432 MHz */
 194 #define CMITC_UARTCLK   192000000 /* 192.0000 MHz */
 195 #define FRI2_64_UARTCLK  64000000 /*  64.0000 MHz */
 196 #define FRI2_48_UARTCLK  48000000 /*  48.0000 MHz */
 197 #define NTC1_UARTCLK     64000000 /*  64.0000 MHz */
 198 #define MINNOW_UARTCLK   50000000 /*  50.0000 MHz */
 199
 200 struct pch_uart_buffer {
 201         unsigned char *buf;
 202         int size;
 203 };
 204
 205 struct eg20t_port {
 206         struct uart_port port;
 207         int port_type;
 208         void __iomem *membase;
 209         resource_size_t mapbase;
 210         unsigned int iobase;
 211         struct pci_dev *pdev;
 212         int fifo_size;
 213         unsigned int uartclk;
 214         int start_tx;
 215         int start_rx;
 216         int tx_empty;
 217         int trigger;
 218         int trigger_level;
 219         struct pch_uart_buffer rxbuf;
 220         unsigned int dmsr;
 221         unsigned int fcr;
 222         unsigned int mcr;
 223         unsigned int use_dma;
 224         struct dma_async_tx_descriptor  *desc_tx;
 225         struct dma_async_tx_descriptor  *desc_rx;
 226         struct pch_dma_slave            param_tx;
 227         struct pch_dma_slave            param_rx;
 228         struct dma_chan                 *chan_tx;
 229         struct dma_chan                 *chan_rx;
 230         struct scatterlist              *sg_tx_p;
 231         int                             nent;
 232         int                             orig_nent;
 233         struct scatterlist              sg_rx;
 234         int                             tx_dma_use;
 235         void                            *rx_buf_virt;
 236         dma_addr_t                      rx_buf_dma;
 237
 238 #define IRQ_NAME_SIZE 17
 239         char                            irq_name[IRQ_NAME_SIZE];
 240 };
 241
 242 /**
 243  * struct pch_uart_driver_data - private data structure for UART-DMA
 244  * @port_type:                  The type of UART port
 245  * @line_no:                    UART port line number (0, 1, 2...)
 246  */
 247 struct pch_uart_driver_data {
 248         int port_type;
 249         int line_no;
 250 };
 251
 252 enum pch_uart_num_t {
 253         pch_et20t_uart0 = 0,
 254         pch_et20t_uart1,
 255         pch_et20t_uart2,
 256         pch_et20t_uart3,
 257         pch_ml7213_uart0,
 258         pch_ml7213_uart1,
 259         pch_ml7213_uart2,
 260         pch_ml7223_uart0,
 261         pch_ml7223_uart1,
 262         pch_ml7831_uart0,
 263         pch_ml7831_uart1,
 264 };
 265
 266 static struct pch_uart_driver_data drv_dat[] = {
 267         [pch_et20t_uart0] = {PORT_PCH_8LINE, 0},
 268         [pch_et20t_uart1] = {PORT_PCH_2LINE, 1},
 269         [pch_et20t_uart2] = {PORT_PCH_2LINE, 2},
 270         [pch_et20t_uart3] = {PORT_PCH_2LINE, 3},
 271         [pch_ml7213_uart0] = {PORT_PCH_8LINE, 0},
 272         [pch_ml7213_uart1] = {PORT_PCH_2LINE, 1},
 273         [pch_ml7213_uart2] = {PORT_PCH_2LINE, 2},
 274         [pch_ml7223_uart0] = {PORT_PCH_8LINE, 0},
 275         [pch_ml7223_uart1] = {PORT_PCH_2LINE, 1},
 276         [pch_ml7831_uart0] = {PORT_PCH_8LINE, 0},
 277         [pch_ml7831_uart1] = {PORT_PCH_2LINE, 1},
 278 };
 279
 280 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
 281 static struct eg20t_port *pch_uart_ports[PCH_UART_NR];
 282 #endif
 283 static unsigned int default_baud = 9600;
 284 static unsigned int user_uartclk = 0;
 285 static const int trigger_level_256[4] = { 1, 64, 128, 224 };
 286 static const int trigger_level_64[4] = { 1, 16, 32, 56 };
 287 static const int trigger_level_16[4] = { 1, 4, 8, 14 };
 288 static const int trigger_level_1[4] = { 1, 1, 1, 1 };
 289
 290 #define PCH_REGS_BUFSIZE        1024
 291
 292
 293 static ssize_t port_show_regs(struct file *file, char __user *user_buf,
 294                                 size_t count, loff_t *ppos)
 295 {
 296         struct eg20t_port *priv = file->private_data;
 297         char *buf;
 298         u32 len = 0;
 299         ssize_t ret;
 300         unsigned char lcr;
 301
 302         buf = kzalloc(PCH_REGS_BUFSIZE, GFP_KERNEL);
 303         if (!buf)
 304                 return 0;
 305
 306         len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
 307                         "PCH EG20T port[%d] regs:\n", priv->port.line);
 308
 309         len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
 310                         "=================================\n");
 311         len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
 312                         "IER: \t0x%02x\n", ioread8(priv->membase + UART_IER));
 313         len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
 314                         "IIR: \t0x%02x\n", ioread8(priv->membase + UART_IIR));
 315         len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
 316                         "LCR: \t0x%02x\n", ioread8(priv->membase + UART_LCR));
 317         len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
 318                         "MCR: \t0x%02x\n", ioread8(priv->membase + UART_MCR));
 319         len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
 320                         "LSR: \t0x%02x\n", ioread8(priv->membase + UART_LSR));
 321         len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
 322                         "MSR: \t0x%02x\n", ioread8(priv->membase + UART_MSR));
 323         len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
 324                         "BRCSR: \t0x%02x\n",
 325                         ioread8(priv->membase + PCH_UART_BRCSR));
 326
 327         lcr = ioread8(priv->membase + UART_LCR);
 328         iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
 329         len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
 330                         "DLL: \t0x%02x\n", ioread8(priv->membase + UART_DLL));
 331         len += scnprintf(buf + len, PCH_REGS_BUFSIZE - len,
 332                         "DLM: \t0x%02x\n", ioread8(priv->membase + UART_DLM));
 333         iowrite8(lcr, priv->membase + UART_LCR);
 334
 335         if (len > PCH_REGS_BUFSIZE)
 336                 len = PCH_REGS_BUFSIZE;
 337
 338         ret =  simple_read_from_buffer(user_buf, count, ppos, buf, len);
 339         kfree(buf);
 340         return ret;
 341 }
 342
 343 static const struct file_operations port_regs_ops = {
 344         .owner          = THIS_MODULE,
 345         .open           = simple_open,
 346         .read           = port_show_regs,
 347         .llseek         = default_llseek,
 348 };
 349
 350 static const struct dmi_system_id pch_uart_dmi_table[] = {
 351         {
 352                 .ident = "CM-iTC",
 353                 {
 354                         DMI_MATCH(DMI_BOARD_NAME, "CM-iTC"),
 355                 },
 356                 (void *)CMITC_UARTCLK,
 357         },
 358         {
 359                 .ident = "FRI2",
 360                 {
 361                         DMI_MATCH(DMI_BIOS_VERSION, "FRI2"),
 362                 },
 363                 (void *)FRI2_64_UARTCLK,
 364         },
 365         {
 366                 .ident = "Fish River Island II",
 367                 {
 368                         DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"),
 369                 },
 370                 (void *)FRI2_48_UARTCLK,
 371         },
 372         {
 373                 .ident = "COMe-mTT",
 374                 {
 375                         DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"),
 376                 },
 377                 (void *)NTC1_UARTCLK,
 378         },
 379         {
 380                 .ident = "nanoETXexpress-TT",
 381                 {
 382                         DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"),
 383                 },
 384                 (void *)NTC1_UARTCLK,
 385         },
 386         {
 387                 .ident = "MinnowBoard",
 388                 {
 389                         DMI_MATCH(DMI_BOARD_NAME, "MinnowBoard"),
 390                 },
 391                 (void *)MINNOW_UARTCLK,
 392         },
 393         { }
 394 };
 395
 396 /* Return UART clock, checking for board specific clocks. */
 397 static unsigned int pch_uart_get_uartclk(void)
 398 {
 399         const struct dmi_system_id *d;
 400
 401         if (user_uartclk)
 402                 return user_uartclk;
 403
 404         d = dmi_first_match(pch_uart_dmi_table);
 405         if (d)
 406                 return (unsigned long)d->driver_data;
 407
 408         return DEFAULT_UARTCLK;
 409 }
 410
 411 static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv,
 412                                           unsigned int flag)
 413 {
 414         u8 ier = ioread8(priv->membase + UART_IER);
 415         ier |= flag & PCH_UART_IER_MASK;
 416         iowrite8(ier, priv->membase + UART_IER);
 417 }
 418
 419 static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv,
 420                                            unsigned int flag)
 421 {
 422         u8 ier = ioread8(priv->membase + UART_IER);
 423         ier &= ~(flag & PCH_UART_IER_MASK);
 424         iowrite8(ier, priv->membase + UART_IER);
 425 }
 426
 427 static int pch_uart_hal_set_line(struct eg20t_port *priv, unsigned int baud,
 428                                  unsigned int parity, unsigned int bits,
 429                                  unsigned int stb)
 430 {
 431         unsigned int dll, dlm, lcr;
 432         int div;
 433
 434         div = DIV_ROUND_CLOSEST(priv->uartclk / 16, baud);
 435         if (div < 0 || USHRT_MAX <= div) {
 436                 dev_err(priv->port.dev, "Invalid Baud(div=0x%x)\n", div);
 437                 return -EINVAL;
 438         }
 439
 440         dll = (unsigned int)div & 0x00FFU;
 441         dlm = ((unsigned int)div >> 8) & 0x00FFU;
 442
 443         if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
 444                 dev_err(priv->port.dev, "Invalid parity(0x%x)\n", parity);
 445                 return -EINVAL;
 446         }
 447
 448         if (bits & ~PCH_UART_LCR_WLS) {
 449                 dev_err(priv->port.dev, "Invalid bits(0x%x)\n", bits);
 450                 return -EINVAL;
 451         }
 452
 453         if (stb & ~PCH_UART_LCR_STB) {
 454                 dev_err(priv->port.dev, "Invalid STB(0x%x)\n", stb);
 455                 return -EINVAL;
 456         }
 457
 458         lcr = parity;
 459         lcr |= bits;
 460         lcr |= stb;
 461
 462         dev_dbg(priv->port.dev, "%s:baud = %u, div = %04x, lcr = %02x (%lu)\n",
 463                  __func__, baud, div, lcr, jiffies);
 464         iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
 465         iowrite8(dll, priv->membase + PCH_UART_DLL);
 466         iowrite8(dlm, priv->membase + PCH_UART_DLM);
 467         iowrite8(lcr, priv->membase + UART_LCR);
 468
 469         return 0;
 470 }
 471
 472 static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
 473                                     unsigned int flag)
 474 {
 475         if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
 476                 dev_err(priv->port.dev, "%s:Invalid flag(0x%x)\n",
 477                         __func__, flag);
 478                 return -EINVAL;
 479         }
 480
 481         iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR);
 482         iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag,
 483                  priv->membase + UART_FCR);
 484         iowrite8(priv->fcr, priv->membase + UART_FCR);
 485
 486         return 0;
 487 }
 488
 489 static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
 490                                  unsigned int dmamode,
 491                                  unsigned int fifo_size, unsigned int trigger)
 492 {
 493         u8 fcr;
 494
 495         if (dmamode & ~PCH_UART_FCR_DMS) {
 496                 dev_err(priv->port.dev, "%s:Invalid DMA Mode(0x%x)\n",
 497                         __func__, dmamode);
 498                 return -EINVAL;
 499         }
 500
 501         if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
 502                 dev_err(priv->port.dev, "%s:Invalid FIFO SIZE(0x%x)\n",
 503                         __func__, fifo_size);
 504                 return -EINVAL;
 505         }
 506
 507         if (trigger & ~PCH_UART_FCR_RFTL) {
 508                 dev_err(priv->port.dev, "%s:Invalid TRIGGER(0x%x)\n",
 509                         __func__, trigger);
 510                 return -EINVAL;
 511         }
 512
 513         switch (priv->fifo_size) {
 514         case 256:
 515                 priv->trigger_level =
 516                     trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT];
 517                 break;
 518         case 64:
 519                 priv->trigger_level =
 520                     trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT];
 521                 break;
 522         case 16:
 523                 priv->trigger_level =
 524                     trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT];
 525                 break;
 526         default:
 527                 priv->trigger_level =
 528                     trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT];
 529                 break;
 530         }
 531         fcr =
 532             dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR;
 533         iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR);
 534         iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR,
 535                  priv->membase + UART_FCR);
 536         iowrite8(fcr, priv->membase + UART_FCR);
 537         priv->fcr = fcr;
 538
 539         return 0;
 540 }
 541
 542 static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
 543 {
 544         unsigned int msr = ioread8(priv->membase + UART_MSR);
 545         priv->dmsr = msr & PCH_UART_MSR_DELTA;
 546         return (u8)msr;
 547 }
 548
 549 static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
 550                              int rx_size)
 551 {
 552         int i;
 553         u8 rbr, lsr;
 554         struct uart_port *port = &priv->port;
 555
 556         lsr = ioread8(priv->membase + UART_LSR);
 557         for (i = 0, lsr = ioread8(priv->membase + UART_LSR);
 558              i < rx_size && lsr & (UART_LSR_DR | UART_LSR_BI);
 559              lsr = ioread8(priv->membase + UART_LSR)) {
 560                 rbr = ioread8(priv->membase + PCH_UART_RBR);
 561
 562                 if (lsr & UART_LSR_BI) {
 563                         port->icount.brk++;
 564                         if (uart_handle_break(port))
 565                                 continue;
 566                 }
 567                 if (uart_prepare_sysrq_char(port, rbr))
 568                         continue;
 569
 570                 buf[i++] = rbr;
 571         }
 572         return i;
 573 }
 574
 575 static unsigned char pch_uart_hal_get_iid(struct eg20t_port *priv)
 576 {
 577         return ioread8(priv->membase + UART_IIR) &\
 578                       (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP);
 579 }
 580
 581 static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
 582 {
 583         return ioread8(priv->membase + UART_LSR);
 584 }
 585
 586 static void pch_uart_hal_set_break(struct eg20t_port *priv, int on)
 587 {
 588         unsigned int lcr;
 589
 590         lcr = ioread8(priv->membase + UART_LCR);
 591         if (on)
 592                 lcr |= PCH_UART_LCR_SB;
 593         else
 594                 lcr &= ~PCH_UART_LCR_SB;
 595
 596         iowrite8(lcr, priv->membase + UART_LCR);
 597 }
 598
 599 static void push_rx(struct eg20t_port *priv, const unsigned char *buf,
 600                     int size)
 601 {
 602         struct uart_port *port = &priv->port;
 603         struct tty_port *tport = &port->state->port;
 604
 605         tty_insert_flip_string(tport, buf, size);
 606         tty_flip_buffer_push(tport);
 607 }
 608
 609 static int dma_push_rx(struct eg20t_port *priv, int size)
 610 {
 611         int room;
 612         struct uart_port *port = &priv->port;
 613         struct tty_port *tport = &port->state->port;
 614
 615         room = tty_buffer_request_room(tport, size);
 616
 617         if (room < size)
 618                 dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
 619                          size - room);
 620         if (!room)
 621                 return 0;
 622
 623         tty_insert_flip_string(tport, sg_virt(&priv->sg_rx), size);
 624
 625         port->icount.rx += room;
 626
 627         return room;
 628 }
 629
 630 static void pch_free_dma(struct uart_port *port)
 631 {
 632         struct eg20t_port *priv;
 633         priv = container_of(port, struct eg20t_port, port);
 634
 635         if (priv->chan_tx) {
 636                 dma_release_channel(priv->chan_tx);
 637                 priv->chan_tx = NULL;
 638         }
 639         if (priv->chan_rx) {
 640                 dma_release_channel(priv->chan_rx);
 641                 priv->chan_rx = NULL;
 642         }
 643
 644         if (priv->rx_buf_dma) {
 645                 dma_free_coherent(port->dev, port->fifosize, priv->rx_buf_virt,
 646                                   priv->rx_buf_dma);
 647                 priv->rx_buf_virt = NULL;
 648                 priv->rx_buf_dma = 0;
 649         }
 650
 651         return;
 652 }
 653
 654 static bool filter(struct dma_chan *chan, void *slave)
 655 {
 656         struct pch_dma_slave *param = slave;
 657
 658         if ((chan->chan_id == param->chan_id) && (param->dma_dev ==
 659                                                   chan->device->dev)) {
 660                 chan->private = param;
 661                 return true;
 662         } else {
 663                 return false;
 664         }
 665 }
 666
 667 static void pch_request_dma(struct uart_port *port)
 668 {
 669         dma_cap_mask_t mask;
 670         struct dma_chan *chan;
 671         struct pci_dev *dma_dev;
 672         struct pch_dma_slave *param;
 673         struct eg20t_port *priv =
 674                                 container_of(port, struct eg20t_port, port);
 675         dma_cap_zero(mask);
 676         dma_cap_set(DMA_SLAVE, mask);
 677
 678         /* Get DMA's dev information */
 679         dma_dev = pci_get_slot(priv->pdev->bus,
 680                         PCI_DEVFN(PCI_SLOT(priv->pdev->devfn), 0));
 681
 682         /* Set Tx DMA */
 683         param = &priv->param_tx;
 684         param->dma_dev = &dma_dev->dev;
 685         param->chan_id = priv->port.line * 2; /* Tx = 0, 2, 4, ... */
 686
 687         param->tx_reg = port->mapbase + UART_TX;
 688         chan = dma_request_channel(mask, filter, param);
 689         if (!chan) {
 690                 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Tx)\n",
 691                         __func__);
 692                 pci_dev_put(dma_dev);
 693                 return;
 694         }
 695         priv->chan_tx = chan;
 696
 697         /* Set Rx DMA */
 698         param = &priv->param_rx;
 699         param->dma_dev = &dma_dev->dev;
 700         param->chan_id = priv->port.line * 2 + 1; /* Rx = Tx + 1 */
 701
 702         param->rx_reg = port->mapbase + UART_RX;
 703         chan = dma_request_channel(mask, filter, param);
 704         if (!chan) {
 705                 dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
 706                         __func__);
 707                 dma_release_channel(priv->chan_tx);
 708                 priv->chan_tx = NULL;
 709                 pci_dev_put(dma_dev);
 710                 return;
 711         }
 712
 713         /* Get Consistent memory for DMA */
 714         priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize,
 715                                     &priv->rx_buf_dma, GFP_KERNEL);
 716         priv->chan_rx = chan;
 717
 718         pci_dev_put(dma_dev);
 719 }
 720
 721 static void pch_dma_rx_complete(void *arg)
 722 {
 723         struct eg20t_port *priv = arg;
 724         struct uart_port *port = &priv->port;
 725         int count;
 726
 727         dma_sync_sg_for_cpu(port->dev, &priv->sg_rx, 1, DMA_FROM_DEVICE);
 728         count = dma_push_rx(priv, priv->trigger_level);
 729         if (count)
 730                 tty_flip_buffer_push(&port->state->port);
 731         async_tx_ack(priv->desc_rx);
 732         pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
 733                                             PCH_UART_HAL_RX_ERR_INT);
 734 }
 735
 736 static void pch_dma_tx_complete(void *arg)
 737 {
 738         struct eg20t_port *priv = arg;
 739         struct uart_port *port = &priv->port;
 740         struct scatterlist *sg = priv->sg_tx_p;
 741         int i;
 742
 743         for (i = 0; i < priv->nent; i++, sg++)
 744                 uart_xmit_advance(port, sg_dma_len(sg));
 745
 746         async_tx_ack(priv->desc_tx);
 747         dma_unmap_sg(port->dev, priv->sg_tx_p, priv->orig_nent, DMA_TO_DEVICE);
 748         priv->tx_dma_use = 0;
 749         priv->nent = 0;
 750         priv->orig_nent = 0;
 751         kfree(priv->sg_tx_p);
 752         pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
 753 }
 754
 755 static int handle_rx_to(struct eg20t_port *priv)
 756 {
 757         struct pch_uart_buffer *buf;
 758         int rx_size;
 759
 760         if (!priv->start_rx) {
 761                 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
 762                                                      PCH_UART_HAL_RX_ERR_INT);
 763                 return 0;
 764         }
 765         buf = &priv->rxbuf;
 766         do {
 767                 rx_size = pch_uart_hal_read(priv, buf->buf, buf->size);
 768                 push_rx(priv, buf->buf, rx_size);
 769         } while (rx_size == buf->size);
 770
 771         return PCH_UART_HANDLED_RX_INT;
 772 }
 773
 774 static int dma_handle_rx(struct eg20t_port *priv)
 775 {
 776         struct uart_port *port = &priv->port;
 777         struct dma_async_tx_descriptor *desc;
 778         struct scatterlist *sg;
 779
 780         priv = container_of(port, struct eg20t_port, port);
 781         sg = &priv->sg_rx;
 782
 783         sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
 784
 785         sg_dma_len(sg) = priv->trigger_level;
 786
 787         sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
 788                      sg_dma_len(sg), offset_in_page(priv->rx_buf_virt));
 789
 790         sg_dma_address(sg) = priv->rx_buf_dma;
 791
 792         desc = dmaengine_prep_slave_sg(priv->chan_rx,
 793                         sg, 1, DMA_DEV_TO_MEM,
 794                         DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 795
 796         if (!desc)
 797                 return 0;
 798
 799         priv->desc_rx = desc;
 800         desc->callback = pch_dma_rx_complete;
 801         desc->callback_param = priv;
 802         desc->tx_submit(desc);
 803         dma_async_issue_pending(priv->chan_rx);
 804
 805         return PCH_UART_HANDLED_RX_INT;
 806 }
 807
 808 static unsigned int handle_tx(struct eg20t_port *priv)
 809 {
 810         struct uart_port *port = &priv->port;
 811         unsigned char ch;
 812         int fifo_size;
 813         int tx_empty;
 814
 815         if (!priv->start_tx) {
 816                 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
 817                         __func__, jiffies);
 818                 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 819                 priv->tx_empty = 1;
 820                 return 0;
 821         }
 822
 823         fifo_size = max(priv->fifo_size, 1);
 824         tx_empty = 1;
 825         if (port->x_char) {
 826                 iowrite8(port->x_char, priv->membase + PCH_UART_THR);
 827                 port->icount.tx++;
 828                 port->x_char = 0;
 829                 tx_empty = 0;
 830                 fifo_size--;
 831         }
 832
 833         while (!uart_tx_stopped(port) && fifo_size &&
 834                         uart_fifo_get(port, &ch)) {
 835                 iowrite8(ch, priv->membase + PCH_UART_THR);
 836                 fifo_size--;
 837                 tx_empty = 0;
 838         }
 839
 840         priv->tx_empty = tx_empty;
 841
 842         if (tx_empty) {
 843                 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 844                 uart_write_wakeup(port);
 845         }
 846
 847         return PCH_UART_HANDLED_TX_INT;
 848 }
 849
 850 static unsigned int dma_handle_tx(struct eg20t_port *priv)
 851 {
 852         struct uart_port *port = &priv->port;
 853         struct tty_port *tport = &port->state->port;
 854         struct scatterlist *sg;
 855         int nent;
 856         int fifo_size;
 857         struct dma_async_tx_descriptor *desc;
 858         unsigned int bytes, tail;
 859         int num;
 860         int i;
 861         int size;
 862         int rem;
 863
 864         if (!priv->start_tx) {
 865                 dev_info(priv->port.dev, "%s:Tx isn't started. (%lu)\n",
 866                         __func__, jiffies);
 867                 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 868                 priv->tx_empty = 1;
 869                 return 0;
 870         }
 871
 872         if (priv->tx_dma_use) {
 873                 dev_dbg(priv->port.dev, "%s:Tx is not completed. (%lu)\n",
 874                         __func__, jiffies);
 875                 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 876                 priv->tx_empty = 1;
 877                 return 0;
 878         }
 879
 880         fifo_size = max(priv->fifo_size, 1);
 881
 882         if (port->x_char) {
 883                 iowrite8(port->x_char, priv->membase + PCH_UART_THR);
 884                 port->icount.tx++;
 885                 port->x_char = 0;
 886                 fifo_size--;
 887         }
 888
 889         bytes = kfifo_out_linear(&tport->xmit_fifo, &tail, UART_XMIT_SIZE);
 890         if (!bytes) {
 891                 dev_dbg(priv->port.dev, "%s 0 bytes return\n", __func__);
 892                 pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
 893                 uart_write_wakeup(port);
 894                 return 0;
 895         }
 896
 897         if (bytes > fifo_size) {
 898                 num = bytes / fifo_size + 1;
 899                 size = fifo_size;
 900                 rem = bytes % fifo_size;
 901         } else {
 902                 num = 1;
 903                 size = bytes;
 904                 rem = bytes;
 905         }
 906
 907         dev_dbg(priv->port.dev, "%s num=%d size=%d rem=%d\n",
 908                 __func__, num, size, rem);
 909
 910         priv->tx_dma_use = 1;
 911
 912         priv->sg_tx_p = kmalloc_array(num, sizeof(struct scatterlist), GFP_ATOMIC);
 913         if (!priv->sg_tx_p) {
 914                 dev_err(priv->port.dev, "%s:kzalloc Failed\n", __func__);
 915                 return 0;
 916         }
 917
 918         sg_init_table(priv->sg_tx_p, num); /* Initialize SG table */
 919         sg = priv->sg_tx_p;
 920
 921         for (i = 0; i < num; i++, sg++) {
 922                 if (i == (num - 1))
 923                         sg_set_page(sg, virt_to_page(tport->xmit_buf),
 924                                     rem, fifo_size * i);
 925                 else
 926                         sg_set_page(sg, virt_to_page(tport->xmit_buf),
 927                                     size, fifo_size * i);
 928         }
 929
 930         sg = priv->sg_tx_p;
 931         nent = dma_map_sg(port->dev, sg, num, DMA_TO_DEVICE);
 932         if (!nent) {
 933                 dev_err(priv->port.dev, "%s:dma_map_sg Failed\n", __func__);
 934                 return 0;
 935         }
 936         priv->orig_nent = num;
 937         priv->nent = nent;
 938
 939         for (i = 0; i < nent; i++, sg++) {
 940                 sg->offset = tail + fifo_size * i;
 941                 sg_dma_address(sg) = (sg_dma_address(sg) &
 942                                     ~(UART_XMIT_SIZE - 1)) + sg->offset;
 943                 if (i == (nent - 1))
 944                         sg_dma_len(sg) = rem;
 945                 else
 946                         sg_dma_len(sg) = size;
 947         }
 948
 949         desc = dmaengine_prep_slave_sg(priv->chan_tx,
 950                                         priv->sg_tx_p, nent, DMA_MEM_TO_DEV,
 951                                         DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 952         if (!desc) {
 953                 dev_err(priv->port.dev, "%s:dmaengine_prep_slave_sg Failed\n",
 954                         __func__);
 955                 return 0;
 956         }
 957         dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
 958         priv->desc_tx = desc;
 959         desc->callback = pch_dma_tx_complete;
 960         desc->callback_param = priv;
 961
 962         desc->tx_submit(desc);
 963
 964         dma_async_issue_pending(priv->chan_tx);
 965
 966         return PCH_UART_HANDLED_TX_INT;
 967 }
 968
 969 static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr)
 970 {
 971         struct uart_port *port = &priv->port;
 972         struct tty_struct *tty = tty_port_tty_get(&port->state->port);
 973         char   *error_msg[5] = {};
 974         int    i = 0;
 975
 976         if (lsr & PCH_UART_LSR_ERR)
 977                 error_msg[i++] = "Error data in FIFO\n";
 978
 979         if (lsr & UART_LSR_FE) {
 980                 port->icount.frame++;
 981                 error_msg[i++] = "  Framing Error\n";
 982         }
 983
 984         if (lsr & UART_LSR_PE) {
 985                 port->icount.parity++;
 986                 error_msg[i++] = "  Parity Error\n";
 987         }
 988
 989         if (lsr & UART_LSR_OE) {
 990                 port->icount.overrun++;
 991                 error_msg[i++] = "  Overrun Error\n";
 992         }
 993
 994         if (tty == NULL) {
 995                 for (i = 0; error_msg[i] != NULL; i++)
 996                         dev_err(&priv->pdev->dev, error_msg[i]);
 997         } else {
 998                 tty_kref_put(tty);
 999         }
1000 }
1001
1002 static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
1003 {
1004         struct eg20t_port *priv = dev_id;
1005         unsigned int handled;
1006         u8 lsr;
1007         int ret = 0;
1008         unsigned char iid;
1009         int next = 1;
1010         u8 msr;
1011
1012         uart_port_lock(&priv->port);
1013         handled = 0;
1014         while (next) {
1015                 iid = pch_uart_hal_get_iid(priv);
1016                 if (iid & PCH_UART_IIR_IP) /* No Interrupt */
1017                         break;
1018                 switch (iid) {
1019                 case PCH_UART_IID_RLS:  /* Receiver Line Status */
1020                         lsr = pch_uart_hal_get_line_status(priv);
1021                         if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE |
1022                                                 UART_LSR_PE | UART_LSR_OE)) {
1023                                 pch_uart_err_ir(priv, lsr);
1024                                 ret = PCH_UART_HANDLED_RX_ERR_INT;
1025                         } else {
1026                                 ret = PCH_UART_HANDLED_LS_INT;
1027                         }
1028                         break;
1029                 case PCH_UART_IID_RDR:  /* Received Data Ready */
1030                         if (priv->use_dma) {
1031                                 pch_uart_hal_disable_interrupt(priv,
1032                                                 PCH_UART_HAL_RX_INT |
1033                                                 PCH_UART_HAL_RX_ERR_INT);
1034                                 ret = dma_handle_rx(priv);
1035                                 if (!ret)
1036                                         pch_uart_hal_enable_interrupt(priv,
1037                                                 PCH_UART_HAL_RX_INT |
1038                                                 PCH_UART_HAL_RX_ERR_INT);
1039                         } else {
1040                                 ret = handle_rx_to(priv);
1041                         }
1042                         break;
1043                 case PCH_UART_IID_RDR_TO:       /* Received Data Ready
1044                                                    (FIFO Timeout) */
1045                         ret = handle_rx_to(priv);
1046                         break;
1047                 case PCH_UART_IID_THRE: /* Transmitter Holding Register
1048                                                    Empty */
1049                         if (priv->use_dma)
1050                                 ret = dma_handle_tx(priv);
1051                         else
1052                                 ret = handle_tx(priv);
1053                         break;
1054                 case PCH_UART_IID_MS:   /* Modem Status */
1055                         msr = pch_uart_hal_get_modem(priv);
1056                         next = 0; /* MS ir prioirty is the lowest. So, MS ir
1057                                      means final interrupt */
1058                         if ((msr & UART_MSR_ANY_DELTA) == 0)
1059                                 break;
1060                         ret |= PCH_UART_HANDLED_MS_INT;
1061                         break;
1062                 default:        /* Never junp to this label */
1063                         dev_err(priv->port.dev, "%s:iid=%02x (%lu)\n", __func__,
1064                                 iid, jiffies);
1065                         ret = -1;
1066                         next = 0;
1067                         break;
1068                 }
1069                 handled |= (unsigned int)ret;
1070         }
1071
1072         uart_unlock_and_check_sysrq(&priv->port);
1073         return IRQ_RETVAL(handled);
1074 }
1075
1076 /* This function tests whether the transmitter fifo and shifter for the port
1077                                                 described by 'port' is empty. */
1078 static unsigned int pch_uart_tx_empty(struct uart_port *port)
1079 {
1080         struct eg20t_port *priv;
1081
1082         priv = container_of(port, struct eg20t_port, port);
1083         if (priv->tx_empty)
1084                 return TIOCSER_TEMT;
1085         else
1086                 return 0;
1087 }
1088
1089 /* Returns the current state of modem control inputs. */
1090 static unsigned int pch_uart_get_mctrl(struct uart_port *port)
1091 {
1092         struct eg20t_port *priv;
1093         u8 modem;
1094         unsigned int ret = 0;
1095
1096         priv = container_of(port, struct eg20t_port, port);
1097         modem = pch_uart_hal_get_modem(priv);
1098
1099         if (modem & UART_MSR_DCD)
1100                 ret |= TIOCM_CAR;
1101
1102         if (modem & UART_MSR_RI)
1103                 ret |= TIOCM_RNG;
1104
1105         if (modem & UART_MSR_DSR)
1106                 ret |= TIOCM_DSR;
1107
1108         if (modem & UART_MSR_CTS)
1109                 ret |= TIOCM_CTS;
1110
1111         return ret;
1112 }
1113
1114 static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
1115 {
1116         u32 mcr = 0;
1117         struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
1118
1119         if (mctrl & TIOCM_DTR)
1120                 mcr |= UART_MCR_DTR;
1121         if (mctrl & TIOCM_RTS)
1122                 mcr |= UART_MCR_RTS;
1123         if (mctrl & TIOCM_LOOP)
1124                 mcr |= UART_MCR_LOOP;
1125
1126         if (priv->mcr & UART_MCR_AFE)
1127                 mcr |= UART_MCR_AFE;
1128
1129         if (mctrl)
1130                 iowrite8(mcr, priv->membase + UART_MCR);
1131 }
1132
1133 static void pch_uart_stop_tx(struct uart_port *port)
1134 {
1135         struct eg20t_port *priv;
1136         priv = container_of(port, struct eg20t_port, port);
1137         priv->start_tx = 0;
1138         priv->tx_dma_use = 0;
1139 }
1140
1141 static void pch_uart_start_tx(struct uart_port *port)
1142 {
1143         struct eg20t_port *priv;
1144
1145         priv = container_of(port, struct eg20t_port, port);
1146
1147         if (priv->use_dma) {
1148                 if (priv->tx_dma_use) {
1149                         dev_dbg(priv->port.dev, "%s : Tx DMA is NOT empty.\n",
1150                                 __func__);
1151                         return;
1152                 }
1153         }
1154
1155         priv->start_tx = 1;
1156         pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
1157 }
1158
1159 static void pch_uart_stop_rx(struct uart_port *port)
1160 {
1161         struct eg20t_port *priv;
1162         priv = container_of(port, struct eg20t_port, port);
1163         priv->start_rx = 0;
1164         pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
1165                                              PCH_UART_HAL_RX_ERR_INT);
1166 }
1167
1168 /* Enable the modem status interrupts. */
1169 static void pch_uart_enable_ms(struct uart_port *port)
1170 {
1171         struct eg20t_port *priv;
1172         priv = container_of(port, struct eg20t_port, port);
1173         pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT);
1174 }
1175
1176 /* Control the transmission of a break signal. */
1177 static void pch_uart_break_ctl(struct uart_port *port, int ctl)
1178 {
1179         struct eg20t_port *priv;
1180         unsigned long flags;
1181
1182         priv = container_of(port, struct eg20t_port, port);
1183         uart_port_lock_irqsave(&priv->port, &flags);
1184         pch_uart_hal_set_break(priv, ctl);
1185         uart_port_unlock_irqrestore(&priv->port, flags);
1186 }
1187
1188 /* Grab any interrupt resources and initialise any low level driver state. */
1189 static int pch_uart_startup(struct uart_port *port)
1190 {
1191         struct eg20t_port *priv;
1192         int ret;
1193         int fifo_size;
1194         int trigger_level;
1195
1196         priv = container_of(port, struct eg20t_port, port);
1197         priv->tx_empty = 1;
1198
1199         if (port->uartclk)
1200                 priv->uartclk = port->uartclk;
1201         else
1202                 port->uartclk = priv->uartclk;
1203
1204         pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1205         ret = pch_uart_hal_set_line(priv, default_baud,
1206                               PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
1207                               PCH_UART_HAL_STB1);
1208         if (ret)
1209                 return ret;
1210
1211         switch (priv->fifo_size) {
1212         case 256:
1213                 fifo_size = PCH_UART_HAL_FIFO256;
1214                 break;
1215         case 64:
1216                 fifo_size = PCH_UART_HAL_FIFO64;
1217                 break;
1218         case 16:
1219                 fifo_size = PCH_UART_HAL_FIFO16;
1220                 break;
1221         case 1:
1222         default:
1223                 fifo_size = PCH_UART_HAL_FIFO_DIS;
1224                 break;
1225         }
1226
1227         switch (priv->trigger) {
1228         case PCH_UART_HAL_TRIGGER1:
1229                 trigger_level = 1;
1230                 break;
1231         case PCH_UART_HAL_TRIGGER_L:
1232                 trigger_level = priv->fifo_size / 4;
1233                 break;
1234         case PCH_UART_HAL_TRIGGER_M:
1235                 trigger_level = priv->fifo_size / 2;
1236                 break;
1237         case PCH_UART_HAL_TRIGGER_H:
1238         default:
1239                 trigger_level = priv->fifo_size - (priv->fifo_size / 8);
1240                 break;
1241         }
1242
1243         priv->trigger_level = trigger_level;
1244         ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1245                                     fifo_size, priv->trigger);
1246         if (ret < 0)
1247                 return ret;
1248
1249         ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
1250                         priv->irq_name, priv);
1251         if (ret < 0)
1252                 return ret;
1253
1254         if (priv->use_dma)
1255                 pch_request_dma(port);
1256
1257         priv->start_rx = 1;
1258         pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
1259                                             PCH_UART_HAL_RX_ERR_INT);
1260         uart_update_timeout(port, CS8, default_baud);
1261
1262         return 0;
1263 }
1264
1265 static void pch_uart_shutdown(struct uart_port *port)
1266 {
1267         struct eg20t_port *priv;
1268         int ret;
1269
1270         priv = container_of(port, struct eg20t_port, port);
1271         pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1272         pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO);
1273         ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
1274                               PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
1275         if (ret)
1276                 dev_err(priv->port.dev,
1277                         "pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
1278
1279         pch_free_dma(port);
1280
1281         free_irq(priv->port.irq, priv);
1282 }
1283
1284 /* Change the port parameters, including word length, parity, stop
1285  *bits.  Update read_status_mask and ignore_status_mask to indicate
1286  *the types of events we are interested in receiving.  */
1287 static void pch_uart_set_termios(struct uart_port *port,
1288                                  struct ktermios *termios,
1289                                  const struct ktermios *old)
1290 {
1291         int rtn;
1292         unsigned int baud, parity, bits, stb;
1293         struct eg20t_port *priv;
1294         unsigned long flags;
1295
1296         priv = container_of(port, struct eg20t_port, port);
1297         switch (termios->c_cflag & CSIZE) {
1298         case CS5:
1299                 bits = PCH_UART_HAL_5BIT;
1300                 break;
1301         case CS6:
1302                 bits = PCH_UART_HAL_6BIT;
1303                 break;
1304         case CS7:
1305                 bits = PCH_UART_HAL_7BIT;
1306                 break;
1307         default:                /* CS8 */
1308                 bits = PCH_UART_HAL_8BIT;
1309                 break;
1310         }
1311         if (termios->c_cflag & CSTOPB)
1312                 stb = PCH_UART_HAL_STB2;
1313         else
1314                 stb = PCH_UART_HAL_STB1;
1315
1316         if (termios->c_cflag & PARENB) {
1317                 if (termios->c_cflag & PARODD)
1318                         parity = PCH_UART_HAL_PARITY_ODD;
1319                 else
1320                         parity = PCH_UART_HAL_PARITY_EVEN;
1321
1322         } else
1323                 parity = PCH_UART_HAL_PARITY_NONE;
1324
1325         /* Only UART0 has auto hardware flow function */
1326         if ((termios->c_cflag & CRTSCTS) && (priv->fifo_size == 256))
1327                 priv->mcr |= UART_MCR_AFE;
1328         else
1329                 priv->mcr &= ~UART_MCR_AFE;
1330
1331         termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
1332
1333         baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
1334
1335         uart_port_lock_irqsave(port, &flags);
1336
1337         uart_update_timeout(port, termios->c_cflag, baud);
1338         rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
1339         if (rtn)
1340                 goto out;
1341
1342         pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
1343         /* Don't rewrite B0 */
1344         if (tty_termios_baud_rate(termios))
1345                 tty_termios_encode_baud_rate(termios, baud, baud);
1346
1347 out:
1348         uart_port_unlock_irqrestore(port, flags);
1349 }
1350
1351 static const char *pch_uart_type(struct uart_port *port)
1352 {
1353         return KBUILD_MODNAME;
1354 }
1355
1356 static void pch_uart_release_port(struct uart_port *port)
1357 {
1358         struct eg20t_port *priv;
1359
1360         priv = container_of(port, struct eg20t_port, port);
1361         pci_iounmap(priv->pdev, priv->membase);
1362         pci_release_regions(priv->pdev);
1363 }
1364
1365 static int pch_uart_request_port(struct uart_port *port)
1366 {
1367         struct eg20t_port *priv;
1368         int ret;
1369         void __iomem *membase;
1370
1371         priv = container_of(port, struct eg20t_port, port);
1372         ret = pci_request_regions(priv->pdev, KBUILD_MODNAME);
1373         if (ret < 0)
1374                 return -EBUSY;
1375
1376         membase = pci_iomap(priv->pdev, 1, 0);
1377         if (!membase) {
1378                 pci_release_regions(priv->pdev);
1379                 return -EBUSY;
1380         }
1381         priv->membase = port->membase = membase;
1382
1383         return 0;
1384 }
1385
1386 static void pch_uart_config_port(struct uart_port *port, int type)
1387 {
1388         struct eg20t_port *priv;
1389
1390         priv = container_of(port, struct eg20t_port, port);
1391         if (type & UART_CONFIG_TYPE) {
1392                 port->type = priv->port_type;
1393                 pch_uart_request_port(port);
1394         }
1395 }
1396
1397 static int pch_uart_verify_port(struct uart_port *port,
1398                                 struct serial_struct *serinfo)
1399 {
1400         struct eg20t_port *priv;
1401
1402         priv = container_of(port, struct eg20t_port, port);
1403         if (serinfo->flags & UPF_LOW_LATENCY) {
1404                 dev_info(priv->port.dev,
1405                         "PCH UART : Use PIO Mode (without DMA)\n");
1406                 priv->use_dma = 0;
1407                 serinfo->flags &= ~UPF_LOW_LATENCY;
1408         } else {
1409 #ifndef CONFIG_PCH_DMA
1410                 dev_err(priv->port.dev, "%s : PCH DMA is not Loaded.\n",
1411                         __func__);
1412                 return -EOPNOTSUPP;
1413 #endif
1414                 if (!priv->use_dma) {
1415                         pch_request_dma(port);
1416                         if (priv->chan_rx)
1417                                 priv->use_dma = 1;
1418                 }
1419                 dev_info(priv->port.dev, "PCH UART: %s\n",
1420                                 priv->use_dma ?
1421                                 "Use DMA Mode" : "No DMA");
1422         }
1423
1424         return 0;
1425 }
1426
1427 #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_PCH_UART_CONSOLE)
1428 /*
1429  *      Wait for transmitter & holding register to empty
1430  */
1431 static void wait_for_xmitr(struct eg20t_port *up, int bits)
1432 {
1433         unsigned int status, tmout = 10000;
1434
1435         /* Wait up to 10ms for the character(s) to be sent. */
1436         for (;;) {
1437                 status = ioread8(up->membase + UART_LSR);
1438
1439                 if ((status & bits) == bits)
1440                         break;
1441                 if (--tmout == 0)
1442                         break;
1443                 udelay(1);
1444         }
1445
1446         /* Wait up to 1s for flow control if necessary */
1447         if (up->port.flags & UPF_CONS_FLOW) {
1448                 unsigned int tmout;
1449                 for (tmout = 1000000; tmout; tmout--) {
1450                         unsigned int msr = ioread8(up->membase + UART_MSR);
1451                         if (msr & UART_MSR_CTS)
1452                                 break;
1453                         udelay(1);
1454                         touch_nmi_watchdog();
1455                 }
1456         }
1457 }
1458 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_PCH_UART_CONSOLE */
1459
1460 #ifdef CONFIG_CONSOLE_POLL
1461 /*
1462  * Console polling routines for communicate via uart while
1463  * in an interrupt or debug context.
1464  */
1465 static int pch_uart_get_poll_char(struct uart_port *port)
1466 {
1467         struct eg20t_port *priv =
1468                 container_of(port, struct eg20t_port, port);
1469         u8 lsr = ioread8(priv->membase + UART_LSR);
1470
1471         if (!(lsr & UART_LSR_DR))
1472                 return NO_POLL_CHAR;
1473
1474         return ioread8(priv->membase + PCH_UART_RBR);
1475 }
1476
1477
1478 static void pch_uart_put_poll_char(struct uart_port *port,
1479                          unsigned char c)
1480 {
1481         unsigned int ier;
1482         struct eg20t_port *priv =
1483                 container_of(port, struct eg20t_port, port);
1484
1485         /*
1486          * First save the IER then disable the interrupts
1487          */
1488         ier = ioread8(priv->membase + UART_IER);
1489         pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1490
1491         wait_for_xmitr(priv, UART_LSR_THRE);
1492         /*
1493          * Send the character out.
1494          */
1495         iowrite8(c, priv->membase + PCH_UART_THR);
1496
1497         /*
1498          * Finally, wait for transmitter to become empty
1499          * and restore the IER
1500          */
1501         wait_for_xmitr(priv, UART_LSR_BOTH_EMPTY);
1502         iowrite8(ier, priv->membase + UART_IER);
1503 }
1504 #endif /* CONFIG_CONSOLE_POLL */
1505
1506 static const struct uart_ops pch_uart_ops = {
1507         .tx_empty = pch_uart_tx_empty,
1508         .set_mctrl = pch_uart_set_mctrl,
1509         .get_mctrl = pch_uart_get_mctrl,
1510         .stop_tx = pch_uart_stop_tx,
1511         .start_tx = pch_uart_start_tx,
1512         .stop_rx = pch_uart_stop_rx,
1513         .enable_ms = pch_uart_enable_ms,
1514         .break_ctl = pch_uart_break_ctl,
1515         .startup = pch_uart_startup,
1516         .shutdown = pch_uart_shutdown,
1517         .set_termios = pch_uart_set_termios,
1518 /*      .pm             = pch_uart_pm,          Not supported yet */
1519         .type = pch_uart_type,
1520         .release_port = pch_uart_release_port,
1521         .request_port = pch_uart_request_port,
1522         .config_port = pch_uart_config_port,
1523         .verify_port = pch_uart_verify_port,
1524 #ifdef CONFIG_CONSOLE_POLL
1525         .poll_get_char = pch_uart_get_poll_char,
1526         .poll_put_char = pch_uart_put_poll_char,
1527 #endif
1528 };
1529
1530 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1531
1532 static void pch_console_putchar(struct uart_port *port, unsigned char ch)
1533 {
1534         struct eg20t_port *priv =
1535                 container_of(port, struct eg20t_port, port);
1536
1537         wait_for_xmitr(priv, UART_LSR_THRE);
1538         iowrite8(ch, priv->membase + PCH_UART_THR);
1539 }
1540
1541 /*
1542  *      Print a string to the serial port trying not to disturb
1543  *      any possible real use of the port...
1544  *
1545  *      The console_lock must be held when we get here.
1546  */
1547 static void
1548 pch_console_write(struct console *co, const char *s, unsigned int count)
1549 {
1550         struct eg20t_port *priv;
1551         unsigned long flags;
1552         int locked = 1;
1553         u8 ier;
1554
1555         priv = pch_uart_ports[co->index];
1556
1557         touch_nmi_watchdog();
1558
1559         if (oops_in_progress)
1560                 locked = uart_port_trylock_irqsave(&priv->port, &flags);
1561         else
1562                 uart_port_lock_irqsave(&priv->port, &flags);
1563
1564         /*
1565          *      First save the IER then disable the interrupts
1566          */
1567         ier = ioread8(priv->membase + UART_IER);
1568
1569         pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
1570
1571         uart_console_write(&priv->port, s, count, pch_console_putchar);
1572
1573         /*
1574          *      Finally, wait for transmitter to become empty
1575          *      and restore the IER
1576          */
1577         wait_for_xmitr(priv, UART_LSR_BOTH_EMPTY);
1578         iowrite8(ier, priv->membase + UART_IER);
1579
1580         if (locked)
1581                 uart_port_unlock_irqrestore(&priv->port, flags);
1582 }
1583
1584 static int __init pch_console_setup(struct console *co, char *options)
1585 {
1586         struct uart_port *port;
1587         int baud = default_baud;
1588         int bits = 8;
1589         int parity = 'n';
1590         int flow = 'n';
1591
1592         /*
1593          * Check whether an invalid uart number has been specified, and
1594          * if so, search for the first available port that does have
1595          * console support.
1596          */
1597         if (co->index >= PCH_UART_NR)
1598                 co->index = 0;
1599         port = &pch_uart_ports[co->index]->port;
1600
1601         if (!port || (!port->iobase && !port->membase))
1602                 return -ENODEV;
1603
1604         port->uartclk = pch_uart_get_uartclk();
1605
1606         if (options)
1607                 uart_parse_options(options, &baud, &parity, &bits, &flow);
1608
1609         return uart_set_options(port, co, baud, parity, bits, flow);
1610 }
1611
1612 static struct uart_driver pch_uart_driver;
1613
1614 static struct console pch_console = {
1615         .name           = PCH_UART_DRIVER_DEVICE,
1616         .write          = pch_console_write,
1617         .device         = uart_console_device,
1618         .setup          = pch_console_setup,
1619         .flags          = CON_PRINTBUFFER | CON_ANYTIME,
1620         .index          = -1,
1621         .data           = &pch_uart_driver,
1622 };
1623
1624 #define PCH_CONSOLE     (&pch_console)
1625 #else
1626 #define PCH_CONSOLE     NULL
1627 #endif  /* CONFIG_SERIAL_PCH_UART_CONSOLE */
1628
1629 static struct uart_driver pch_uart_driver = {
1630         .owner = THIS_MODULE,
1631         .driver_name = KBUILD_MODNAME,
1632         .dev_name = PCH_UART_DRIVER_DEVICE,
1633         .major = 0,
1634         .minor = 0,
1635         .nr = PCH_UART_NR,
1636         .cons = PCH_CONSOLE,
1637 };
1638
1639 static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
1640                                              const struct pci_device_id *id)
1641 {
1642         struct eg20t_port *priv;
1643         int ret;
1644         unsigned int iobase;
1645         unsigned int mapbase;
1646         unsigned char *rxbuf;
1647         int fifosize;
1648         int port_type;
1649         struct pch_uart_driver_data *board;
1650         char name[32];
1651
1652         board = &drv_dat[id->driver_data];
1653         port_type = board->port_type;
1654
1655         priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
1656         if (priv == NULL)
1657                 goto init_port_alloc_err;
1658
1659         rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
1660         if (!rxbuf)
1661                 goto init_port_free_txbuf;
1662
1663         switch (port_type) {
1664         case PORT_PCH_8LINE:
1665                 fifosize = 256; /* EG20T/ML7213: UART0 */
1666                 break;
1667         case PORT_PCH_2LINE:
1668                 fifosize = 64; /* EG20T:UART1~3  ML7213: UART1~2*/
1669                 break;
1670         default:
1671                 dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
1672                 goto init_port_hal_free;
1673         }
1674
1675         pci_enable_msi(pdev);
1676         pci_set_master(pdev);
1677
1678         iobase = pci_resource_start(pdev, 0);
1679         mapbase = pci_resource_start(pdev, 1);
1680         priv->mapbase = mapbase;
1681         priv->iobase = iobase;
1682         priv->pdev = pdev;
1683         priv->tx_empty = 1;
1684         priv->rxbuf.buf = rxbuf;
1685         priv->rxbuf.size = PAGE_SIZE;
1686
1687         priv->fifo_size = fifosize;
1688         priv->uartclk = pch_uart_get_uartclk();
1689         priv->port_type = port_type;
1690         priv->port.dev = &pdev->dev;
1691         priv->port.iobase = iobase;
1692         priv->port.membase = NULL;
1693         priv->port.mapbase = mapbase;
1694         priv->port.irq = pdev->irq;
1695         priv->port.iotype = UPIO_PORT;
1696         priv->port.ops = &pch_uart_ops;
1697         priv->port.flags = UPF_BOOT_AUTOCONF;
1698         priv->port.fifosize = fifosize;
1699         priv->port.line = board->line_no;
1700         priv->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PCH_UART_CONSOLE);
1701         priv->trigger = PCH_UART_HAL_TRIGGER_M;
1702
1703         snprintf(priv->irq_name, IRQ_NAME_SIZE,
1704                  KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d",
1705                  priv->port.line);
1706
1707         pci_set_drvdata(pdev, priv);
1708         priv->trigger_level = 1;
1709         priv->fcr = 0;
1710
1711         if (pdev->dev.of_node)
1712                 of_property_read_u32(pdev->dev.of_node, "clock-frequency"
1713                                          , &user_uartclk);
1714
1715 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1716         pch_uart_ports[board->line_no] = priv;
1717 #endif
1718         ret = uart_add_one_port(&pch_uart_driver, &priv->port);
1719         if (ret < 0)
1720                 goto init_port_hal_free;
1721
1722         snprintf(name, sizeof(name), "uart%d_regs", priv->port.line);
1723         debugfs_create_file(name, S_IFREG | S_IRUGO, NULL, priv,
1724                             &port_regs_ops);
1725
1726         return priv;
1727
1728 init_port_hal_free:
1729 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1730         pch_uart_ports[board->line_no] = NULL;
1731 #endif
1732         free_page((unsigned long)rxbuf);
1733 init_port_free_txbuf:
1734         kfree(priv);
1735 init_port_alloc_err:
1736
1737         return NULL;
1738 }
1739
1740 static void pch_uart_exit_port(struct eg20t_port *priv)
1741 {
1742         char name[32];
1743
1744         snprintf(name, sizeof(name), "uart%d_regs", priv->port.line);
1745         debugfs_lookup_and_remove(name, NULL);
1746         uart_remove_one_port(&pch_uart_driver, &priv->port);
1747         free_page((unsigned long)priv->rxbuf.buf);
1748 }
1749
1750 static void pch_uart_pci_remove(struct pci_dev *pdev)
1751 {
1752         struct eg20t_port *priv = pci_get_drvdata(pdev);
1753
1754         pci_disable_msi(pdev);
1755
1756 #ifdef CONFIG_SERIAL_PCH_UART_CONSOLE
1757         pch_uart_ports[priv->port.line] = NULL;
1758 #endif
1759         pch_uart_exit_port(priv);
1760         pci_disable_device(pdev);
1761         kfree(priv);
1762         return;
1763 }
1764
1765 static int __maybe_unused pch_uart_pci_suspend(struct device *dev)
1766 {
1767         struct eg20t_port *priv = dev_get_drvdata(dev);
1768
1769         uart_suspend_port(&pch_uart_driver, &priv->port);
1770
1771         return 0;
1772 }
1773
1774 static int __maybe_unused pch_uart_pci_resume(struct device *dev)
1775 {
1776         struct eg20t_port *priv = dev_get_drvdata(dev);
1777
1778         uart_resume_port(&pch_uart_driver, &priv->port);
1779
1780         return 0;
1781 }
1782
1783 static const struct pci_device_id pch_uart_pci_id[] = {
1784         {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
1785          .driver_data = pch_et20t_uart0},
1786         {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
1787          .driver_data = pch_et20t_uart1},
1788         {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
1789          .driver_data = pch_et20t_uart2},
1790         {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
1791          .driver_data = pch_et20t_uart3},
1792         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8027),
1793          .driver_data = pch_ml7213_uart0},
1794         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8028),
1795          .driver_data = pch_ml7213_uart1},
1796         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8029),
1797          .driver_data = pch_ml7213_uart2},
1798         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800C),
1799          .driver_data = pch_ml7223_uart0},
1800         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
1801          .driver_data = pch_ml7223_uart1},
1802         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
1803          .driver_data = pch_ml7831_uart0},
1804         {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
1805          .driver_data = pch_ml7831_uart1},
1806         {0,},
1807 };
1808
1809 static int pch_uart_pci_probe(struct pci_dev *pdev,
1810                                         const struct pci_device_id *id)
1811 {
1812         int ret;
1813         struct eg20t_port *priv;
1814
1815         ret = pci_enable_device(pdev);
1816         if (ret < 0)
1817                 goto probe_error;
1818
1819         priv = pch_uart_init_port(pdev, id);
1820         if (!priv) {
1821                 ret = -EBUSY;
1822                 goto probe_disable_device;
1823         }
1824         pci_set_drvdata(pdev, priv);
1825
1826         return ret;
1827
1828 probe_disable_device:
1829         pci_disable_msi(pdev);
1830         pci_disable_device(pdev);
1831 probe_error:
1832         return ret;
1833 }
1834
1835 static SIMPLE_DEV_PM_OPS(pch_uart_pci_pm_ops,
1836                          pch_uart_pci_suspend,
1837                          pch_uart_pci_resume);
1838
1839 static struct pci_driver pch_uart_pci_driver = {
1840         .name = "pch_uart",
1841         .id_table = pch_uart_pci_id,
1842         .probe = pch_uart_pci_probe,
1843         .remove = pch_uart_pci_remove,
1844         .driver.pm = &pch_uart_pci_pm_ops,
1845 };
1846
1847 static int __init pch_uart_module_init(void)
1848 {
1849         int ret;
1850
1851         /* register as UART driver */
1852         ret = uart_register_driver(&pch_uart_driver);
1853         if (ret < 0)
1854                 return ret;
1855
1856         /* register as PCI driver */
1857         ret = pci_register_driver(&pch_uart_pci_driver);
1858         if (ret < 0)
1859                 uart_unregister_driver(&pch_uart_driver);
1860
1861         return ret;
1862 }
1863 module_init(pch_uart_module_init);
1864
1865 static void __exit pch_uart_module_exit(void)
1866 {
1867         pci_unregister_driver(&pch_uart_pci_driver);
1868         uart_unregister_driver(&pch_uart_driver);
1869 }
1870 module_exit(pch_uart_module_exit);
1871
1872 MODULE_LICENSE("GPL v2");
1873 MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
1874 MODULE_DEVICE_TABLE(pci, pch_uart_pci_id);
1875
1876 module_param(default_baud, uint, S_IRUGO);
1877 MODULE_PARM_DESC(default_baud,
1878                  "Default BAUD for initial driver state and console (default 9600)");
1879 module_param(user_uartclk, uint, S_IRUGO);
1880 MODULE_PARM_DESC(user_uartclk,
1881                  "Override UART default or board specific UART clock");