]> Git Repo - linux.git/blob - drivers/input/touchscreen/goodix_berlin_i2c.c
x86/kaslr: Expose and use the end of the physical memory address space
[linux.git] / drivers / input / touchscreen / goodix_berlin_i2c.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Goodix Berlin Touchscreen Driver
4  *
5  * Copyright (C) 2020 - 2021 Goodix, Inc.
6  * Copyright (C) 2023 Linaro Ltd.
7  *
8  * Based on goodix_ts_berlin driver.
9  */
10 #include <linux/i2c.h>
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/regmap.h>
14 #include <linux/input.h>
15
16 #include "goodix_berlin.h"
17
18 #define I2C_MAX_TRANSFER_SIZE           256
19
20 static const struct regmap_config goodix_berlin_i2c_regmap_conf = {
21         .reg_bits = 32,
22         .val_bits = 8,
23         .max_raw_read = I2C_MAX_TRANSFER_SIZE,
24         .max_raw_write = I2C_MAX_TRANSFER_SIZE,
25 };
26
27 /* vendor & product left unassigned here, should probably be updated from fw info */
28 static const struct input_id goodix_berlin_i2c_input_id = {
29         .bustype = BUS_I2C,
30 };
31
32 static int goodix_berlin_i2c_probe(struct i2c_client *client)
33 {
34         struct regmap *regmap;
35         int error;
36
37         regmap = devm_regmap_init_i2c(client, &goodix_berlin_i2c_regmap_conf);
38         if (IS_ERR(regmap))
39                 return PTR_ERR(regmap);
40
41         error = goodix_berlin_probe(&client->dev, client->irq,
42                                     &goodix_berlin_i2c_input_id, regmap);
43         if (error)
44                 return error;
45
46         return 0;
47 }
48
49 static const struct i2c_device_id goodix_berlin_i2c_id[] = {
50         { "gt9916" },
51         { }
52 };
53
54 MODULE_DEVICE_TABLE(i2c, goodix_berlin_i2c_id);
55
56 static const struct of_device_id goodix_berlin_i2c_of_match[] = {
57         { .compatible = "goodix,gt9916", },
58         { }
59 };
60 MODULE_DEVICE_TABLE(of, goodix_berlin_i2c_of_match);
61
62 static struct i2c_driver goodix_berlin_i2c_driver = {
63         .driver = {
64                 .name = "goodix-berlin-i2c",
65                 .of_match_table = goodix_berlin_i2c_of_match,
66                 .pm = pm_sleep_ptr(&goodix_berlin_pm_ops),
67         },
68         .probe = goodix_berlin_i2c_probe,
69         .id_table = goodix_berlin_i2c_id,
70 };
71 module_i2c_driver(goodix_berlin_i2c_driver);
72
73 MODULE_LICENSE("GPL");
74 MODULE_DESCRIPTION("Goodix Berlin I2C Touchscreen driver");
75 MODULE_AUTHOR("Neil Armstrong <[email protected]>");
This page took 0.03102 seconds and 4 git commands to generate.