drm/irq: Implement a generic vblank_wait function

[linux.git] / drivers / gpu / drm / drm_irq.c

/*
 * drm_irq.c IRQ and vblank support
 *
 * \author Rickard E. (Rik) Faith <[email protected]>
 * \author Gareth Hughes <[email protected]>
 */

/*
 * Created: Fri Mar 19 14:30:16 1999 by [email protected]
 *
 * Copyright 1999, 2000 Precision Insight, Inc., Cedar Park, Texas.
 * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California.
 * All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 */

#include <drm/drmP.h>
#include "drm_trace.h"

#include <linux/interrupt.h>    /* For task queue support */
#include <linux/slab.h>

#include <linux/vgaarb.h>
#include <linux/export.h>

/* Access macro for slots in vblank timestamp ringbuffer. */
#define vblanktimestamp(dev, crtc, count) \
        ((dev)->vblank[crtc].time[(count) % DRM_VBLANKTIME_RBSIZE])

/* Retry timestamp calculation up to 3 times to satisfy
 * drm_timestamp_precision before giving up.
 */
#define DRM_TIMESTAMP_MAXRETRIES 3

/* Threshold in nanoseconds for detection of redundant
 * vblank irq in drm_handle_vblank(). 1 msec should be ok.
 */
#define DRM_REDUNDANT_VBLIRQ_THRESH_NS 1000000

/*
 * Clear vblank timestamp buffer for a crtc.
 */
static void clear_vblank_timestamps(struct drm_device *dev, int crtc)
{
        memset(dev->vblank[crtc].time, 0, sizeof(dev->vblank[crtc].time));
}

/*
 * Disable vblank irq's on crtc, make sure that last vblank count
 * of hardware and corresponding consistent software vblank counter
 * are preserved, even if there are any spurious vblank irq's after
 * disable.
 */
static void vblank_disable_and_save(struct drm_device *dev, int crtc)
{
        unsigned long irqflags;
        u32 vblcount;
        s64 diff_ns;
        int vblrc;
        struct timeval tvblank;
        int count = DRM_TIMESTAMP_MAXRETRIES;

        /* Prevent vblank irq processing while disabling vblank irqs,
         * so no updates of timestamps or count can happen after we've
         * disabled. Needed to prevent races in case of delayed irq's.
         */
        spin_lock_irqsave(&dev->vblank_time_lock, irqflags);

        dev->driver->disable_vblank(dev, crtc);
        dev->vblank[crtc].enabled = false;

        /* No further vblank irq's will be processed after
         * this point. Get current hardware vblank count and
         * vblank timestamp, repeat until they are consistent.
         *
         * FIXME: There is still a race condition here and in
         * drm_update_vblank_count() which can cause off-by-one
         * reinitialization of software vblank counter. If gpu
         * vblank counter doesn't increment exactly at the leading
         * edge of a vblank interval, then we can lose 1 count if
         * we happen to execute between start of vblank and the
         * delayed gpu counter increment.
         */
        do {
                dev->vblank[crtc].last = dev->driver->get_vblank_counter(dev, crtc);
                vblrc = drm_get_last_vbltimestamp(dev, crtc, &tvblank, 0);
        } while (dev->vblank[crtc].last != dev->driver->get_vblank_counter(dev, crtc) && (--count) && vblrc);

        if (!count)
                vblrc = 0;

        /* Compute time difference to stored timestamp of last vblank
         * as updated by last invocation of drm_handle_vblank() in vblank irq.
         */
        vblcount = atomic_read(&dev->vblank[crtc].count);
        diff_ns = timeval_to_ns(&tvblank) -
                  timeval_to_ns(&vblanktimestamp(dev, crtc, vblcount));

        /* If there is at least 1 msec difference between the last stored
         * timestamp and tvblank, then we are currently executing our
         * disable inside a new vblank interval, the tvblank timestamp
         * corresponds to this new vblank interval and the irq handler
         * for this vblank didn't run yet and won't run due to our disable.
         * Therefore we need to do the job of drm_handle_vblank() and
         * increment the vblank counter by one to account for this vblank.
         *
         * Skip this step if there isn't any high precision timestamp
         * available. In that case we can't account for this and just
         * hope for the best.
         */
        if ((vblrc > 0) && (abs64(diff_ns) > 1000000)) {
                atomic_inc(&dev->vblank[crtc].count);
                smp_mb__after_atomic();
        }

        /* Invalidate all timestamps while vblank irq's are off. */
        clear_vblank_timestamps(dev, crtc);

        spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
}

static void vblank_disable_fn(unsigned long arg)
{
        struct drm_vblank_crtc *vblank = (void *)arg;
        struct drm_device *dev = vblank->dev;
        unsigned long irqflags;
        int crtc = vblank->crtc;

        if (!dev->vblank_disable_allowed)
                return;

        spin_lock_irqsave(&dev->vbl_lock, irqflags);
        if (atomic_read(&vblank->refcount) == 0 && vblank->enabled) {
                DRM_DEBUG("disabling vblank on crtc %d\n", crtc);
                vblank_disable_and_save(dev, crtc);
        }
        spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}

/**
 * drm_vblank_cleanup - cleanup vblank support
 * @dev: DRM device
 *
 * This function cleans up any resources allocated in drm_vblank_init.
 */
void drm_vblank_cleanup(struct drm_device *dev)
{
        int crtc;

        /* Bail if the driver didn't call drm_vblank_init() */
        if (dev->num_crtcs == 0)
                return;

        for (crtc = 0; crtc < dev->num_crtcs; crtc++) {
                del_timer_sync(&dev->vblank[crtc].disable_timer);
                vblank_disable_fn((unsigned long)&dev->vblank[crtc]);
        }

        kfree(dev->vblank);

        dev->num_crtcs = 0;
}
EXPORT_SYMBOL(drm_vblank_cleanup);

/**
 * drm_vblank_init - initialize vblank support
 * @dev: drm_device
 * @num_crtcs: number of crtcs supported by @dev
 *
 * This function initializes vblank support for @num_crtcs display pipelines.
 *
 * Returns:
 * Zero on success or a negative error code on failure.
 */
int drm_vblank_init(struct drm_device *dev, int num_crtcs)
{
        int i, ret = -ENOMEM;

        spin_lock_init(&dev->vbl_lock);
        spin_lock_init(&dev->vblank_time_lock);

        dev->num_crtcs = num_crtcs;

        dev->vblank = kcalloc(num_crtcs, sizeof(*dev->vblank), GFP_KERNEL);
        if (!dev->vblank)
                goto err;

        for (i = 0; i < num_crtcs; i++) {
                dev->vblank[i].dev = dev;
                dev->vblank[i].crtc = i;
                init_waitqueue_head(&dev->vblank[i].queue);
                setup_timer(&dev->vblank[i].disable_timer, vblank_disable_fn,
                            (unsigned long)&dev->vblank[i]);
        }

        DRM_INFO("Supports vblank timestamp caching Rev 2 (21.10.2013).\n");

        /* Driver specific high-precision vblank timestamping supported? */
        if (dev->driver->get_vblank_timestamp)
                DRM_INFO("Driver supports precise vblank timestamp query.\n");
        else
                DRM_INFO("No driver support for vblank timestamp query.\n");

        dev->vblank_disable_allowed = false;

        return 0;

err:
        drm_vblank_cleanup(dev);
        return ret;
}
EXPORT_SYMBOL(drm_vblank_init);

static void drm_irq_vgaarb_nokms(void *cookie, bool state)
{
        struct drm_device *dev = cookie;

        if (dev->driver->vgaarb_irq) {
                dev->driver->vgaarb_irq(dev, state);
                return;
        }

        if (!dev->irq_enabled)
                return;

        if (state) {
                if (dev->driver->irq_uninstall)
                        dev->driver->irq_uninstall(dev);
        } else {
                if (dev->driver->irq_preinstall)
                        dev->driver->irq_preinstall(dev);
                if (dev->driver->irq_postinstall)
                        dev->driver->irq_postinstall(dev);
        }
}

/**
 * drm_irq_install - install IRQ handler
 * @dev: DRM device
 * @irq: IRQ number to install the handler for
 *
 * Initializes the IRQ related data. Installs the handler, calling the driver
 * irq_preinstall() and irq_postinstall() functions before and after the
 * installation.
 *
 * This is the simplified helper interface provided for drivers with no special
 * needs. Drivers which need to install interrupt handlers for multiple
 * interrupts must instead set drm_device->irq_enabled to signal the DRM core
 * that vblank interrupts are available.
 *
 * Returns:
 * Zero on success or a negative error code on failure.
 */
int drm_irq_install(struct drm_device *dev, int irq)
{
        int ret;
        unsigned long sh_flags = 0;

        if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
                return -EINVAL;

        if (irq == 0)
                return -EINVAL;

        /* Driver must have been initialized */
        if (!dev->dev_private)
                return -EINVAL;

        if (dev->irq_enabled)
                return -EBUSY;
        dev->irq_enabled = true;

        DRM_DEBUG("irq=%d\n", irq);

        /* Before installing handler */
        if (dev->driver->irq_preinstall)
                dev->driver->irq_preinstall(dev);

        /* Install handler */
        if (drm_core_check_feature(dev, DRIVER_IRQ_SHARED))
                sh_flags = IRQF_SHARED;

        ret = request_irq(irq, dev->driver->irq_handler,
                          sh_flags, dev->driver->name, dev);

        if (ret < 0) {
                dev->irq_enabled = false;
                return ret;
        }

        if (!drm_core_check_feature(dev, DRIVER_MODESET))
                vga_client_register(dev->pdev, (void *)dev, drm_irq_vgaarb_nokms, NULL);

        /* After installing handler */
        if (dev->driver->irq_postinstall)
                ret = dev->driver->irq_postinstall(dev);

        if (ret < 0) {
                dev->irq_enabled = false;
                if (!drm_core_check_feature(dev, DRIVER_MODESET))
                        vga_client_register(dev->pdev, NULL, NULL, NULL);
                free_irq(irq, dev);
        } else {
                dev->irq = irq;
        }

        return ret;
}
EXPORT_SYMBOL(drm_irq_install);

/**
 * drm_irq_uninstall - uninstall the IRQ handler
 * @dev: DRM device
 *
 * Calls the driver's irq_uninstall() function and unregisters the IRQ handler.
 * This should only be called by drivers which used drm_irq_install() to set up
 * their interrupt handler. Other drivers must only reset
 * drm_device->irq_enabled to false.
 *
 * Note that for kernel modesetting drivers it is a bug if this function fails.
 * The sanity checks are only to catch buggy user modesetting drivers which call
 * the same function through an ioctl.
 *
 * Returns:
 * Zero on success or a negative error code on failure.
 */
int drm_irq_uninstall(struct drm_device *dev)
{
        unsigned long irqflags;
        bool irq_enabled;
        int i;

        if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
                return -EINVAL;

        irq_enabled = dev->irq_enabled;
        dev->irq_enabled = false;

        /*
         * Wake up any waiters so they don't hang.
         */
        if (dev->num_crtcs) {
                spin_lock_irqsave(&dev->vbl_lock, irqflags);
                for (i = 0; i < dev->num_crtcs; i++) {
                        wake_up(&dev->vblank[i].queue);
                        dev->vblank[i].enabled = false;
                        dev->vblank[i].last =
                                dev->driver->get_vblank_counter(dev, i);
                }
                spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
        }

        if (!irq_enabled)
                return -EINVAL;

        DRM_DEBUG("irq=%d\n", dev->irq);

        if (!drm_core_check_feature(dev, DRIVER_MODESET))
                vga_client_register(dev->pdev, NULL, NULL, NULL);

        if (dev->driver->irq_uninstall)
                dev->driver->irq_uninstall(dev);

        free_irq(dev->irq, dev);

        return 0;
}
EXPORT_SYMBOL(drm_irq_uninstall);

/*
 * IRQ control ioctl.
 *
 * \param inode device inode.
 * \param file_priv DRM file private.
 * \param cmd command.
 * \param arg user argument, pointing to a drm_control structure.
 * \return zero on success or a negative number on failure.
 *
 * Calls irq_install() or irq_uninstall() according to \p arg.
 */
int drm_control(struct drm_device *dev, void *data,
                struct drm_file *file_priv)
{
        struct drm_control *ctl = data;
        int ret = 0, irq;

        /* if we haven't irq we fallback for compatibility reasons -
         * this used to be a separate function in drm_dma.h
         */

        if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
                return 0;
        if (drm_core_check_feature(dev, DRIVER_MODESET))
                return 0;
        /* UMS was only ever support on pci devices. */
        if (WARN_ON(!dev->pdev))
                return -EINVAL;

        switch (ctl->func) {
        case DRM_INST_HANDLER:
                irq = dev->pdev->irq;

                if (dev->if_version < DRM_IF_VERSION(1, 2) &&
                    ctl->irq != irq)
                        return -EINVAL;
                mutex_lock(&dev->struct_mutex);
                ret = drm_irq_install(dev, irq);
                mutex_unlock(&dev->struct_mutex);

                return ret;
        case DRM_UNINST_HANDLER:
                mutex_lock(&dev->struct_mutex);
                ret = drm_irq_uninstall(dev);
                mutex_unlock(&dev->struct_mutex);

                return ret;
        default:
                return -EINVAL;
        }
}

/**
 * drm_calc_timestamping_constants - calculate vblank timestamp constants
 * @crtc: drm_crtc whose timestamp constants should be updated.
 * @mode: display mode containing the scanout timings
 *
 * Calculate and store various constants which are later
 * needed by vblank and swap-completion timestamping, e.g,
 * by drm_calc_vbltimestamp_from_scanoutpos(). They are
 * derived from CRTC's true scanout timing, so they take
 * things like panel scaling or other adjustments into account.
 */
void drm_calc_timestamping_constants(struct drm_crtc *crtc,
                                     const struct drm_display_mode *mode)
{
        int linedur_ns = 0, pixeldur_ns = 0, framedur_ns = 0;
        int dotclock = mode->crtc_clock;

        /* Valid dotclock? */
        if (dotclock > 0) {
                int frame_size = mode->crtc_htotal * mode->crtc_vtotal;

                /*
                 * Convert scanline length in pixels and video
                 * dot clock to line duration, frame duration
                 * and pixel duration in nanoseconds:
                 */
                pixeldur_ns = 1000000 / dotclock;
                linedur_ns  = div_u64((u64) mode->crtc_htotal * 1000000, dotclock);
                framedur_ns = div_u64((u64) frame_size * 1000000, dotclock);

                /*
                 * Fields of interlaced scanout modes are only half a frame duration.
                 */
                if (mode->flags & DRM_MODE_FLAG_INTERLACE)
                        framedur_ns /= 2;
        } else
                DRM_ERROR("crtc %d: Can't calculate constants, dotclock = 0!\n",
                          crtc->base.id);

        crtc->pixeldur_ns = pixeldur_ns;
        crtc->linedur_ns  = linedur_ns;
        crtc->framedur_ns = framedur_ns;

        DRM_DEBUG("crtc %d: hwmode: htotal %d, vtotal %d, vdisplay %d\n",
                  crtc->base.id, mode->crtc_htotal,
                  mode->crtc_vtotal, mode->crtc_vdisplay);
        DRM_DEBUG("crtc %d: clock %d kHz framedur %d linedur %d, pixeldur %d\n",
                  crtc->base.id, dotclock, framedur_ns,
                  linedur_ns, pixeldur_ns);
}
EXPORT_SYMBOL(drm_calc_timestamping_constants);

/**
 * drm_calc_vbltimestamp_from_scanoutpos - precise vblank timestamp helper
 * @dev: DRM device
 * @crtc: Which CRTC's vblank timestamp to retrieve
 * @max_error: Desired maximum allowable error in timestamps (nanosecs)
 *             On return contains true maximum error of timestamp
 * @vblank_time: Pointer to struct timeval which should receive the timestamp
 * @flags: Flags to pass to driver:
 *         0 = Default,
 *         DRM_CALLED_FROM_VBLIRQ = If function is called from vbl IRQ handler
 * @refcrtc: CRTC which defines scanout timing
 * @mode: mode which defines the scanout timings
 *
 * Implements calculation of exact vblank timestamps from given drm_display_mode
 * timings and current video scanout position of a CRTC. This can be called from
 * within get_vblank_timestamp() implementation of a kms driver to implement the
 * actual timestamping.
 *
 * Should return timestamps conforming to the OML_sync_control OpenML
 * extension specification. The timestamp corresponds to the end of
 * the vblank interval, aka start of scanout of topmost-leftmost display
 * pixel in the following video frame.
 *
 * Requires support for optional dev->driver->get_scanout_position()
 * in kms driver, plus a bit of setup code to provide a drm_display_mode
 * that corresponds to the true scanout timing.
 *
 * The current implementation only handles standard video modes. It
 * returns as no operation if a doublescan or interlaced video mode is
 * active. Higher level code is expected to handle this.
 *
 * Returns:
 * Negative value on error, failure or if not supported in current
 * video mode:
 *
 * -EINVAL   - Invalid CRTC.
 * -EAGAIN   - Temporary unavailable, e.g., called before initial modeset.
 * -ENOTSUPP - Function not supported in current display mode.
 * -EIO      - Failed, e.g., due to failed scanout position query.
 *
 * Returns or'ed positive status flags on success:
 *
 * DRM_VBLANKTIME_SCANOUTPOS_METHOD - Signal this method used for timestamping.
 * DRM_VBLANKTIME_INVBL - Timestamp taken while scanout was in vblank interval.
 *
 */
int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, int crtc,
                                          int *max_error,
                                          struct timeval *vblank_time,
                                          unsigned flags,
                                          const struct drm_crtc *refcrtc,
                                          const struct drm_display_mode *mode)
{
        ktime_t stime, etime, mono_time_offset;
        struct timeval tv_etime;
        int vbl_status;
        int vpos, hpos, i;
        int framedur_ns, linedur_ns, pixeldur_ns, delta_ns, duration_ns;
        bool invbl;

        if (crtc < 0 || crtc >= dev->num_crtcs) {
                DRM_ERROR("Invalid crtc %d\n", crtc);
                return -EINVAL;
        }

        /* Scanout position query not supported? Should not happen. */
        if (!dev->driver->get_scanout_position) {
                DRM_ERROR("Called from driver w/o get_scanout_position()!?\n");
                return -EIO;
        }

        /* Durations of frames, lines, pixels in nanoseconds. */
        framedur_ns = refcrtc->framedur_ns;
        linedur_ns  = refcrtc->linedur_ns;
        pixeldur_ns = refcrtc->pixeldur_ns;

        /* If mode timing undefined, just return as no-op:
         * Happens during initial modesetting of a crtc.
         */
        if (framedur_ns == 0) {
                DRM_DEBUG("crtc %d: Noop due to uninitialized mode.\n", crtc);
                return -EAGAIN;
        }

        /* Get current scanout position with system timestamp.
         * Repeat query up to DRM_TIMESTAMP_MAXRETRIES times
         * if single query takes longer than max_error nanoseconds.
         *
         * This guarantees a tight bound on maximum error if
         * code gets preempted or delayed for some reason.
         */
        for (i = 0; i < DRM_TIMESTAMP_MAXRETRIES; i++) {
                /*
                 * Get vertical and horizontal scanout position vpos, hpos,
                 * and bounding timestamps stime, etime, pre/post query.
                 */
                vbl_status = dev->driver->get_scanout_position(dev, crtc, flags, &vpos,
                                                               &hpos, &stime, &etime);

                /*
                 * Get correction for CLOCK_MONOTONIC -> CLOCK_REALTIME if
                 * CLOCK_REALTIME is requested.
                 */
                if (!drm_timestamp_monotonic)
                        mono_time_offset = ktime_get_monotonic_offset();

                /* Return as no-op if scanout query unsupported or failed. */
                if (!(vbl_status & DRM_SCANOUTPOS_VALID)) {
                        DRM_DEBUG("crtc %d : scanoutpos query failed [%d].\n",
                                  crtc, vbl_status);
                        return -EIO;
                }

                /* Compute uncertainty in timestamp of scanout position query. */
                duration_ns = ktime_to_ns(etime) - ktime_to_ns(stime);

                /* Accept result with <  max_error nsecs timing uncertainty. */
                if (duration_ns <= *max_error)
                        break;
        }

        /* Noisy system timing? */
        if (i == DRM_TIMESTAMP_MAXRETRIES) {
                DRM_DEBUG("crtc %d: Noisy timestamp %d us > %d us [%d reps].\n",
                          crtc, duration_ns/1000, *max_error/1000, i);
        }

        /* Return upper bound of timestamp precision error. */
        *max_error = duration_ns;

        /* Check if in vblank area:
         * vpos is >=0 in video scanout area, but negative
         * within vblank area, counting down the number of lines until
         * start of scanout.
         */
        invbl = vbl_status & DRM_SCANOUTPOS_INVBL;

        /* Convert scanout position into elapsed time at raw_time query
         * since start of scanout at first display scanline. delta_ns
         * can be negative if start of scanout hasn't happened yet.
         */
        delta_ns = vpos * linedur_ns + hpos * pixeldur_ns;

        if (!drm_timestamp_monotonic)
                etime = ktime_sub(etime, mono_time_offset);

        /* save this only for debugging purposes */
        tv_etime = ktime_to_timeval(etime);
        /* Subtract time delta from raw timestamp to get final
         * vblank_time timestamp for end of vblank.
         */
        if (delta_ns < 0)
                etime = ktime_add_ns(etime, -delta_ns);
        else
                etime = ktime_sub_ns(etime, delta_ns);
        *vblank_time = ktime_to_timeval(etime);

        DRM_DEBUG("crtc %d : v %d p(%d,%d)@ %ld.%ld -> %ld.%ld [e %d us, %d rep]\n",
                  crtc, (int)vbl_status, hpos, vpos,
                  (long)tv_etime.tv_sec, (long)tv_etime.tv_usec,
                  (long)vblank_time->tv_sec, (long)vblank_time->tv_usec,
                  duration_ns/1000, i);

        vbl_status = DRM_VBLANKTIME_SCANOUTPOS_METHOD;
        if (invbl)
                vbl_status |= DRM_VBLANKTIME_INVBL;

        return vbl_status;
}
EXPORT_SYMBOL(drm_calc_vbltimestamp_from_scanoutpos);

static struct timeval get_drm_timestamp(void)
{
        ktime_t now;

        now = ktime_get();
        if (!drm_timestamp_monotonic)
                now = ktime_sub(now, ktime_get_monotonic_offset());

        return ktime_to_timeval(now);
}

/**
 * drm_get_last_vbltimestamp - retrieve raw timestamp for the most recent
 *                             vblank interval
 * @dev: DRM device
 * @crtc: which CRTC's vblank timestamp to retrieve
 * @tvblank: Pointer to target struct timeval which should receive the timestamp
 * @flags: Flags to pass to driver:
 *         0 = Default,
 *         DRM_CALLED_FROM_VBLIRQ = If function is called from vbl IRQ handler
 *
 * Fetches the system timestamp corresponding to the time of the most recent
 * vblank interval on specified CRTC. May call into kms-driver to
 * compute the timestamp with a high-precision GPU specific method.
 *
 * Returns zero if timestamp originates from uncorrected do_gettimeofday()
 * call, i.e., it isn't very precisely locked to the true vblank.
 *
 * Returns:
 * Non-zero if timestamp is considered to be very precise, zero otherwise.
 */
u32 drm_get_last_vbltimestamp(struct drm_device *dev, int crtc,
                              struct timeval *tvblank, unsigned flags)
{
        int ret;

        /* Define requested maximum error on timestamps (nanoseconds). */
        int max_error = (int) drm_timestamp_precision * 1000;

        /* Query driver if possible and precision timestamping enabled. */
        if (dev->driver->get_vblank_timestamp && (max_error > 0)) {
                ret = dev->driver->get_vblank_timestamp(dev, crtc, &max_error,
                                                        tvblank, flags);
                if (ret > 0)
                        return (u32) ret;
        }

        /* GPU high precision timestamp query unsupported or failed.
         * Return current monotonic/gettimeofday timestamp as best estimate.
         */
        *tvblank = get_drm_timestamp();

        return 0;
}
EXPORT_SYMBOL(drm_get_last_vbltimestamp);

/**
 * drm_vblank_count - retrieve "cooked" vblank counter value
 * @dev: DRM device
 * @crtc: which counter to retrieve
 *
 * Fetches the "cooked" vblank count value that represents the number of
 * vblank events since the system was booted, including lost events due to
 * modesetting activity.
 *
 * Returns:
 * The software vblank counter.
 */
u32 drm_vblank_count(struct drm_device *dev, int crtc)
{
        if (WARN_ON(crtc >= dev->num_crtcs))
                return 0;
        return atomic_read(&dev->vblank[crtc].count);
}
EXPORT_SYMBOL(drm_vblank_count);

/**
 * drm_vblank_count_and_time - retrieve "cooked" vblank counter value
 * and the system timestamp corresponding to that vblank counter value.
 *
 * @dev: DRM device
 * @crtc: which counter to retrieve
 * @vblanktime: Pointer to struct timeval to receive the vblank timestamp.
 *
 * Fetches the "cooked" vblank count value that represents the number of
 * vblank events since the system was booted, including lost events due to
 * modesetting activity. Returns corresponding system timestamp of the time
 * of the vblank interval that corresponds to the current vblank counter value.
 */
u32 drm_vblank_count_and_time(struct drm_device *dev, int crtc,
                              struct timeval *vblanktime)
{
        u32 cur_vblank;

        if (WARN_ON(crtc >= dev->num_crtcs))
                return 0;

        /* Read timestamp from slot of _vblank_time ringbuffer
         * that corresponds to current vblank count. Retry if
         * count has incremented during readout. This works like
         * a seqlock.
         */
        do {
                cur_vblank = atomic_read(&dev->vblank[crtc].count);
                *vblanktime = vblanktimestamp(dev, crtc, cur_vblank);
                smp_rmb();
        } while (cur_vblank != atomic_read(&dev->vblank[crtc].count));

        return cur_vblank;
}
EXPORT_SYMBOL(drm_vblank_count_and_time);

static void send_vblank_event(struct drm_device *dev,
                struct drm_pending_vblank_event *e,
                unsigned long seq, struct timeval *now)
{
        WARN_ON_SMP(!spin_is_locked(&dev->event_lock));
        e->event.sequence = seq;
        e->event.tv_sec = now->tv_sec;
        e->event.tv_usec = now->tv_usec;

        list_add_tail(&e->base.link,
                      &e->base.file_priv->event_list);
        wake_up_interruptible(&e->base.file_priv->event_wait);
        trace_drm_vblank_event_delivered(e->base.pid, e->pipe,
                                         e->event.sequence);
}

/**
 * drm_send_vblank_event - helper to send vblank event after pageflip
 * @dev: DRM device
 * @crtc: CRTC in question
 * @e: the event to send
 *
 * Updates sequence # and timestamp on event, and sends it to userspace.
 * Caller must hold event lock.
 */
void drm_send_vblank_event(struct drm_device *dev, int crtc,
                struct drm_pending_vblank_event *e)
{
        struct timeval now;
        unsigned int seq;
        if (crtc >= 0) {
                seq = drm_vblank_count_and_time(dev, crtc, &now);
        } else {
                seq = 0;

                now = get_drm_timestamp();
        }
        e->pipe = crtc;
        send_vblank_event(dev, e, seq, &now);
}
EXPORT_SYMBOL(drm_send_vblank_event);

/**
 * drm_update_vblank_count - update the master vblank counter
 * @dev: DRM device
 * @crtc: counter to update
 *
 * Call back into the driver to update the appropriate vblank counter
 * (specified by @crtc).  Deal with wraparound, if it occurred, and
 * update the last read value so we can deal with wraparound on the next
 * call if necessary.
 *
 * Only necessary when going from off->on, to account for frames we
 * didn't get an interrupt for.
 *
 * Note: caller must hold dev->vbl_lock since this reads & writes
 * device vblank fields.
 */
static void drm_update_vblank_count(struct drm_device *dev, int crtc)
{
        u32 cur_vblank, diff, tslot, rc;
        struct timeval t_vblank;

        /*
         * Interrupts were disabled prior to this call, so deal with counter
         * wrap if needed.
         * NOTE!  It's possible we lost a full dev->max_vblank_count events
         * here if the register is small or we had vblank interrupts off for
         * a long time.
         *
         * We repeat the hardware vblank counter & timestamp query until
         * we get consistent results. This to prevent races between gpu
         * updating its hardware counter while we are retrieving the
         * corresponding vblank timestamp.
         */
        do {
                cur_vblank = dev->driver->get_vblank_counter(dev, crtc);
                rc = drm_get_last_vbltimestamp(dev, crtc, &t_vblank, 0);
        } while (cur_vblank != dev->driver->get_vblank_counter(dev, crtc));

        /* Deal with counter wrap */
        diff = cur_vblank - dev->vblank[crtc].last;
        if (cur_vblank < dev->vblank[crtc].last) {
                diff += dev->max_vblank_count;

                DRM_DEBUG("last_vblank[%d]=0x%x, cur_vblank=0x%x => diff=0x%x\n",
                          crtc, dev->vblank[crtc].last, cur_vblank, diff);
        }

        DRM_DEBUG("enabling vblank interrupts on crtc %d, missed %d\n",
                  crtc, diff);

        /* Reinitialize corresponding vblank timestamp if high-precision query
         * available. Skip this step if query unsupported or failed. Will
         * reinitialize delayed at next vblank interrupt in that case.
         */
        if (rc) {
                tslot = atomic_read(&dev->vblank[crtc].count) + diff;
                vblanktimestamp(dev, crtc, tslot) = t_vblank;
        }

        smp_mb__before_atomic();
        atomic_add(diff, &dev->vblank[crtc].count);
        smp_mb__after_atomic();
}

/**
 * drm_vblank_enable - enable the vblank interrupt on a CRTC
 * @dev: DRM device
 * @crtc: CRTC in question
 */
static int drm_vblank_enable(struct drm_device *dev, int crtc)
{
        int ret = 0;

        assert_spin_locked(&dev->vbl_lock);

        spin_lock(&dev->vblank_time_lock);

        if (!dev->vblank[crtc].enabled) {
                /*
                 * Enable vblank irqs under vblank_time_lock protection.
                 * All vblank count & timestamp updates are held off
                 * until we are done reinitializing master counter and
                 * timestamps. Filtercode in drm_handle_vblank() will
                 * prevent double-accounting of same vblank interval.
                 */
                ret = dev->driver->enable_vblank(dev, crtc);
                DRM_DEBUG("enabling vblank on crtc %d, ret: %d\n", crtc, ret);
                if (ret)
                        atomic_dec(&dev->vblank[crtc].refcount);
                else {
                        dev->vblank[crtc].enabled = true;
                        drm_update_vblank_count(dev, crtc);
                }
        }

        spin_unlock(&dev->vblank_time_lock);

        return ret;
}

/**
 * drm_vblank_get - get a reference count on vblank events
 * @dev: DRM device
 * @crtc: which CRTC to own
 *
 * Acquire a reference count on vblank events to avoid having them disabled
 * while in use.
 *
 * This is the legacy version of drm_crtc_vblank_get().
 *
 * Returns:
 * Zero on success, nonzero on failure.
 */
int drm_vblank_get(struct drm_device *dev, int crtc)
{
        unsigned long irqflags;
        int ret = 0;

        if (WARN_ON(crtc >= dev->num_crtcs))
                return -EINVAL;

        spin_lock_irqsave(&dev->vbl_lock, irqflags);
        /* Going from 0->1 means we have to enable interrupts again */
        if (atomic_add_return(1, &dev->vblank[crtc].refcount) == 1) {
                ret = drm_vblank_enable(dev, crtc);
        } else {
                if (!dev->vblank[crtc].enabled) {
                        atomic_dec(&dev->vblank[crtc].refcount);
                        ret = -EINVAL;
                }
        }
        spin_unlock_irqrestore(&dev->vbl_lock, irqflags);

        return ret;
}
EXPORT_SYMBOL(drm_vblank_get);

/**
 * drm_crtc_vblank_get - get a reference count on vblank events
 * @crtc: which CRTC to own
 *
 * Acquire a reference count on vblank events to avoid having them disabled
 * while in use.
 *
 * This is the native kms version of drm_vblank_off().
 *
 * Returns:
 * Zero on success, nonzero on failure.
 */
int drm_crtc_vblank_get(struct drm_crtc *crtc)
{
        return drm_vblank_get(crtc->dev, drm_crtc_index(crtc));
}
EXPORT_SYMBOL(drm_crtc_vblank_get);

/**
 * drm_vblank_put - give up ownership of vblank events
 * @dev: DRM device
 * @crtc: which counter to give up
 *
 * Release ownership of a given vblank counter, turning off interrupts
 * if possible. Disable interrupts after drm_vblank_offdelay milliseconds.
 *
 * This is the legacy version of drm_crtc_vblank_put().
 */
void drm_vblank_put(struct drm_device *dev, int crtc)
{
        BUG_ON(atomic_read(&dev->vblank[crtc].refcount) == 0);

        if (WARN_ON(crtc >= dev->num_crtcs))
                return;

        /* Last user schedules interrupt disable */
        if (atomic_dec_and_test(&dev->vblank[crtc].refcount) &&
            (drm_vblank_offdelay > 0))
                mod_timer(&dev->vblank[crtc].disable_timer,
                          jiffies + ((drm_vblank_offdelay * HZ)/1000));
}
EXPORT_SYMBOL(drm_vblank_put);

/**
 * drm_crtc_vblank_put - give up ownership of vblank events
 * @crtc: which counter to give up
 *
 * Release ownership of a given vblank counter, turning off interrupts
 * if possible. Disable interrupts after drm_vblank_offdelay milliseconds.
 *
 * This is the native kms version of drm_vblank_put().
 */
void drm_crtc_vblank_put(struct drm_crtc *crtc)
{
        drm_vblank_put(crtc->dev, drm_crtc_index(crtc));
}
EXPORT_SYMBOL(drm_crtc_vblank_put);

/**
 * drm_wait_one_vblank - wait for one vblank
 * @dev: DRM device
 * @crtc: crtc index
 *
 * This waits for one vblank to pass on @crtc, using the irq driver interfaces.
 * It is a failure to call this when the vblank irq for @crtc is disabled, e.g.
 * due to lack of driver support or because the crtc is off.
 */
void drm_wait_one_vblank(struct drm_device *dev, int crtc)
{
        int ret;
        u32 last;

        ret = drm_vblank_get(dev, crtc);
        if (WARN_ON(ret))
                return;

        last = drm_vblank_count(dev, crtc);

        ret = wait_event_timeout(dev->vblank[crtc].queue,
                                 last != drm_vblank_count(dev, crtc),
                                 msecs_to_jiffies(100));

        WARN_ON(ret == 0);

        drm_vblank_put(dev, crtc);
}
EXPORT_SYMBOL(drm_wait_one_vblank);

/**
 * drm_crtc_wait_one_vblank - wait for one vblank
 * @crtc: DRM crtc
 *
 * This waits for one vblank to pass on @crtc, using the irq driver interfaces.
 * It is a failure to call this when the vblank irq for @crtc is disabled, e.g.
 * due to lack of driver support or because the crtc is off.
 */
void drm_crtc_wait_one_vblank(struct drm_crtc *crtc)
{
        drm_wait_one_vblank(crtc->dev, drm_crtc_index(crtc));
}
EXPORT_SYMBOL(drm_crtc_wait_one_vblank);

/**
 * drm_vblank_off - disable vblank events on a CRTC
 * @dev: DRM device
 * @crtc: CRTC in question
 *
 * Drivers can use this function to shut down the vblank interrupt handling when
 * disabling a crtc. This function ensures that the latest vblank frame count is
 * stored so that drm_vblank_on() can restore it again.
 *
 * Drivers must use this function when the hardware vblank counter can get
 * reset, e.g. when suspending.
 *
 * This is the legacy version of drm_crtc_vblank_off().
 */
void drm_vblank_off(struct drm_device *dev, int crtc)
{
        struct drm_pending_vblank_event *e, *t;
        struct timeval now;
        unsigned long irqflags;
        unsigned int seq;

        if (WARN_ON(crtc >= dev->num_crtcs))
                return;

        spin_lock_irqsave(&dev->vbl_lock, irqflags);
        vblank_disable_and_save(dev, crtc);
        wake_up(&dev->vblank[crtc].queue);

        /* Send any queued vblank events, lest the natives grow disquiet */
        seq = drm_vblank_count_and_time(dev, crtc, &now);

        spin_lock(&dev->event_lock);
        list_for_each_entry_safe(e, t, &dev->vblank_event_list, base.link) {
                if (e->pipe != crtc)
                        continue;
                DRM_DEBUG("Sending premature vblank event on disable: \
                          wanted %d, current %d\n",
                          e->event.sequence, seq);
                list_del(&e->base.link);
                drm_vblank_put(dev, e->pipe);
                send_vblank_event(dev, e, seq, &now);
        }
        spin_unlock(&dev->event_lock);

        spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
EXPORT_SYMBOL(drm_vblank_off);

/**
 * drm_crtc_vblank_off - disable vblank events on a CRTC
 * @crtc: CRTC in question
 *
 * Drivers can use this function to shut down the vblank interrupt handling when
 * disabling a crtc. This function ensures that the latest vblank frame count is
 * stored so that drm_vblank_on can restore it again.
 *
 * Drivers must use this function when the hardware vblank counter can get
 * reset, e.g. when suspending.
 *
 * This is the native kms version of drm_vblank_off().
 */
void drm_crtc_vblank_off(struct drm_crtc *crtc)
{
        drm_vblank_off(crtc->dev, drm_crtc_index(crtc));
}
EXPORT_SYMBOL(drm_crtc_vblank_off);

/**
 * drm_vblank_on - enable vblank events on a CRTC
 * @dev: DRM device
 * @crtc: CRTC in question
 *
 * This functions restores the vblank interrupt state captured with
 * drm_vblank_off() again. Note that calls to drm_vblank_on() and
 * drm_vblank_off() can be unbalanced and so can also be unconditionaly called
 * in driver load code to reflect the current hardware state of the crtc.
 *
 * This is the legacy version of drm_crtc_vblank_on().
 */
void drm_vblank_on(struct drm_device *dev, int crtc)
{
        unsigned long irqflags;

        if (WARN_ON(crtc >= dev->num_crtcs))
                return;

        spin_lock_irqsave(&dev->vbl_lock, irqflags);
        /* re-enable interrupts if there's are users left */
        if (atomic_read(&dev->vblank[crtc].refcount) != 0)
                WARN_ON(drm_vblank_enable(dev, crtc));
        spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
EXPORT_SYMBOL(drm_vblank_on);

/**
 * drm_crtc_vblank_on - enable vblank events on a CRTC
 * @crtc: CRTC in question
 *
 * This functions restores the vblank interrupt state captured with
 * drm_vblank_off() again. Note that calls to drm_vblank_on() and
 * drm_vblank_off() can be unbalanced and so can also be unconditionaly called
 * in driver load code to reflect the current hardware state of the crtc.
 *
 * This is the native kms version of drm_vblank_on().
 */
void drm_crtc_vblank_on(struct drm_crtc *crtc)
{
        drm_vblank_on(crtc->dev, drm_crtc_index(crtc));
}
EXPORT_SYMBOL(drm_crtc_vblank_on);

/**
 * drm_vblank_pre_modeset - account for vblanks across mode sets
 * @dev: DRM device
 * @crtc: CRTC in question
 *
 * Account for vblank events across mode setting events, which will likely
 * reset the hardware frame counter.
 *
 * This is done by grabbing a temporary vblank reference to ensure that the
 * vblank interrupt keeps running across the modeset sequence. With this the
 * software-side vblank frame counting will ensure that there are no jumps or
 * discontinuities.
 *
 * Unfortunately this approach is racy and also doesn't work when the vblank
 * interrupt stops running, e.g. across system suspend resume. It is therefore
 * highly recommended that drivers use the newer drm_vblank_off() and
 * drm_vblank_on() instead. drm_vblank_pre_modeset() only works correctly when
 * using "cooked" software vblank frame counters and not relying on any hardware
 * counters.
 *
 * Drivers must call drm_vblank_post_modeset() when re-enabling the same crtc
 * again.
 */
void drm_vblank_pre_modeset(struct drm_device *dev, int crtc)
{
        /* vblank is not initialized (IRQ not installed ?), or has been freed */
        if (!dev->num_crtcs)
                return;

        if (WARN_ON(crtc >= dev->num_crtcs))
                return;

        /*
         * To avoid all the problems that might happen if interrupts
         * were enabled/disabled around or between these calls, we just
         * have the kernel take a reference on the CRTC (just once though
         * to avoid corrupting the count if multiple, mismatch calls occur),
         * so that interrupts remain enabled in the interim.
         */
        if (!dev->vblank[crtc].inmodeset) {
                dev->vblank[crtc].inmodeset = 0x1;
                if (drm_vblank_get(dev, crtc) == 0)
                        dev->vblank[crtc].inmodeset |= 0x2;
        }
}
EXPORT_SYMBOL(drm_vblank_pre_modeset);

/**
 * drm_vblank_post_modeset - undo drm_vblank_pre_modeset changes
 * @dev: DRM device
 * @crtc: CRTC in question
 *
 * This function again drops the temporary vblank reference acquired in
 * drm_vblank_pre_modeset.
 */
void drm_vblank_post_modeset(struct drm_device *dev, int crtc)
{
        unsigned long irqflags;

        /* vblank is not initialized (IRQ not installed ?), or has been freed */
        if (!dev->num_crtcs)
                return;

        if (dev->vblank[crtc].inmodeset) {
                spin_lock_irqsave(&dev->vbl_lock, irqflags);
                dev->vblank_disable_allowed = true;
                spin_unlock_irqrestore(&dev->vbl_lock, irqflags);

                if (dev->vblank[crtc].inmodeset & 0x2)
                        drm_vblank_put(dev, crtc);

                dev->vblank[crtc].inmodeset = 0;
        }
}
EXPORT_SYMBOL(drm_vblank_post_modeset);

/*
 * drm_modeset_ctl - handle vblank event counter changes across mode switch
 * @DRM_IOCTL_ARGS: standard ioctl arguments
 *
 * Applications should call the %_DRM_PRE_MODESET and %_DRM_POST_MODESET
 * ioctls around modesetting so that any lost vblank events are accounted for.
 *
 * Generally the counter will reset across mode sets.  If interrupts are
 * enabled around this call, we don't have to do anything since the counter
 * will have already been incremented.
 */
int drm_modeset_ctl(struct drm_device *dev, void *data,
                    struct drm_file *file_priv)
{
        struct drm_modeset_ctl *modeset = data;
        unsigned int crtc;

        /* If drm_vblank_init() hasn't been called yet, just no-op */
        if (!dev->num_crtcs)
                return 0;

        /* KMS drivers handle this internally */
        if (drm_core_check_feature(dev, DRIVER_MODESET))
                return 0;

        crtc = modeset->crtc;
        if (crtc >= dev->num_crtcs)
                return -EINVAL;

        switch (modeset->cmd) {
        case _DRM_PRE_MODESET:
                drm_vblank_pre_modeset(dev, crtc);
                break;
        case _DRM_POST_MODESET:
                drm_vblank_post_modeset(dev, crtc);
                break;
        default:
                return -EINVAL;
        }

        return 0;
}

static int drm_queue_vblank_event(struct drm_device *dev, int pipe,
                                  union drm_wait_vblank *vblwait,
                                  struct drm_file *file_priv)
{
        struct drm_pending_vblank_event *e;
        struct timeval now;
        unsigned long flags;
        unsigned int seq;
        int ret;

        e = kzalloc(sizeof *e, GFP_KERNEL);
        if (e == NULL) {
                ret = -ENOMEM;
                goto err_put;
        }

        e->pipe = pipe;
        e->base.pid = current->pid;
        e->event.base.type = DRM_EVENT_VBLANK;
        e->event.base.length = sizeof e->event;
        e->event.user_data = vblwait->request.signal;
        e->base.event = &e->event.base;
        e->base.file_priv = file_priv;
        e->base.destroy = (void (*) (struct drm_pending_event *)) kfree;

        spin_lock_irqsave(&dev->event_lock, flags);

        if (file_priv->event_space < sizeof e->event) {
                ret = -EBUSY;
                goto err_unlock;
        }

        file_priv->event_space -= sizeof e->event;
        seq = drm_vblank_count_and_time(dev, pipe, &now);

        if ((vblwait->request.type & _DRM_VBLANK_NEXTONMISS) &&
            (seq - vblwait->request.sequence) <= (1 << 23)) {
                vblwait->request.sequence = seq + 1;
                vblwait->reply.sequence = vblwait->request.sequence;
        }

        DRM_DEBUG("event on vblank count %d, current %d, crtc %d\n",
                  vblwait->request.sequence, seq, pipe);

        trace_drm_vblank_event_queued(current->pid, pipe,
                                      vblwait->request.sequence);

        e->event.sequence = vblwait->request.sequence;
        if ((seq - vblwait->request.sequence) <= (1 << 23)) {
                drm_vblank_put(dev, pipe);
                send_vblank_event(dev, e, seq, &now);
                vblwait->reply.sequence = seq;
        } else {
                /* drm_handle_vblank_events will call drm_vblank_put */
                list_add_tail(&e->base.link, &dev->vblank_event_list);
                vblwait->reply.sequence = vblwait->request.sequence;
        }

        spin_unlock_irqrestore(&dev->event_lock, flags);

        return 0;

err_unlock:
        spin_unlock_irqrestore(&dev->event_lock, flags);
        kfree(e);
err_put:
        drm_vblank_put(dev, pipe);
        return ret;
}

/*
 * Wait for VBLANK.
 *
 * \param inode device inode.
 * \param file_priv DRM file private.
 * \param cmd command.
 * \param data user argument, pointing to a drm_wait_vblank structure.
 * \return zero on success or a negative number on failure.
 *
 * This function enables the vblank interrupt on the pipe requested, then
 * sleeps waiting for the requested sequence number to occur, and drops
 * the vblank interrupt refcount afterwards. (vblank IRQ disable follows that
 * after a timeout with no further vblank waits scheduled).
 */
int drm_wait_vblank(struct drm_device *dev, void *data,
                    struct drm_file *file_priv)
{
        union drm_wait_vblank *vblwait = data;
        int ret;
        unsigned int flags, seq, crtc, high_crtc;

        if (!dev->irq_enabled)
                return -EINVAL;

        if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
                return -EINVAL;

        if (vblwait->request.type &
            ~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK |
              _DRM_VBLANK_HIGH_CRTC_MASK)) {
                DRM_ERROR("Unsupported type value 0x%x, supported mask 0x%x\n",
                          vblwait->request.type,
                          (_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK |
                           _DRM_VBLANK_HIGH_CRTC_MASK));
                return -EINVAL;
        }

        flags = vblwait->request.type & _DRM_VBLANK_FLAGS_MASK;
        high_crtc = (vblwait->request.type & _DRM_VBLANK_HIGH_CRTC_MASK);
        if (high_crtc)
                crtc = high_crtc >> _DRM_VBLANK_HIGH_CRTC_SHIFT;
        else
                crtc = flags & _DRM_VBLANK_SECONDARY ? 1 : 0;
        if (crtc >= dev->num_crtcs)
                return -EINVAL;

        ret = drm_vblank_get(dev, crtc);
        if (ret) {
                DRM_DEBUG("failed to acquire vblank counter, %d\n", ret);
                return ret;
        }
        seq = drm_vblank_count(dev, crtc);

        switch (vblwait->request.type & _DRM_VBLANK_TYPES_MASK) {
        case _DRM_VBLANK_RELATIVE:
                vblwait->request.sequence += seq;
                vblwait->request.type &= ~_DRM_VBLANK_RELATIVE;
        case _DRM_VBLANK_ABSOLUTE:
                break;
        default:
                ret = -EINVAL;
                goto done;
        }

        if (flags & _DRM_VBLANK_EVENT) {
                /* must hold on to the vblank ref until the event fires
                 * drm_vblank_put will be called asynchronously
                 */
                return drm_queue_vblank_event(dev, crtc, vblwait, file_priv);
        }

        if ((flags & _DRM_VBLANK_NEXTONMISS) &&
            (seq - vblwait->request.sequence) <= (1<<23)) {
                vblwait->request.sequence = seq + 1;
        }

        DRM_DEBUG("waiting on vblank count %d, crtc %d\n",
                  vblwait->request.sequence, crtc);
        dev->vblank[crtc].last_wait = vblwait->request.sequence;
        DRM_WAIT_ON(ret, dev->vblank[crtc].queue, 3 * HZ,
                    (((drm_vblank_count(dev, crtc) -
                       vblwait->request.sequence) <= (1 << 23)) ||
                     !dev->vblank[crtc].enabled ||
                     !dev->irq_enabled));

        if (ret != -EINTR) {
                struct timeval now;

                vblwait->reply.sequence = drm_vblank_count_and_time(dev, crtc, &now);
                vblwait->reply.tval_sec = now.tv_sec;
                vblwait->reply.tval_usec = now.tv_usec;

                DRM_DEBUG("returning %d to client\n",
                          vblwait->reply.sequence);
        } else {
                DRM_DEBUG("vblank wait interrupted by signal\n");
        }

done:
        drm_vblank_put(dev, crtc);
        return ret;
}

static void drm_handle_vblank_events(struct drm_device *dev, int crtc)
{
        struct drm_pending_vblank_event *e, *t;
        struct timeval now;
        unsigned long flags;
        unsigned int seq;

        seq = drm_vblank_count_and_time(dev, crtc, &now);

        spin_lock_irqsave(&dev->event_lock, flags);

        list_for_each_entry_safe(e, t, &dev->vblank_event_list, base.link) {
                if (e->pipe != crtc)
                        continue;
                if ((seq - e->event.sequence) > (1<<23))
                        continue;

                DRM_DEBUG("vblank event on %d, current %d\n",
                          e->event.sequence, seq);

                list_del(&e->base.link);
                drm_vblank_put(dev, e->pipe);
                send_vblank_event(dev, e, seq, &now);
        }

        spin_unlock_irqrestore(&dev->event_lock, flags);

        trace_drm_vblank_event(crtc, seq);
}

/**
 * drm_handle_vblank - handle a vblank event
 * @dev: DRM device
 * @crtc: where this event occurred
 *
 * Drivers should call this routine in their vblank interrupt handlers to
 * update the vblank counter and send any signals that may be pending.
 */
bool drm_handle_vblank(struct drm_device *dev, int crtc)
{
        u32 vblcount;
        s64 diff_ns;
        struct timeval tvblank;
        unsigned long irqflags;

        if (!dev->num_crtcs)
                return false;

        if (WARN_ON(crtc >= dev->num_crtcs))
                return false;

        /* Need timestamp lock to prevent concurrent execution with
         * vblank enable/disable, as this would cause inconsistent
         * or corrupted timestamps and vblank counts.
         */
        spin_lock_irqsave(&dev->vblank_time_lock, irqflags);

        /* Vblank irq handling disabled. Nothing to do. */
        if (!dev->vblank[crtc].enabled) {
                spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
                return false;
        }

        /* Fetch corresponding timestamp for this vblank interval from
         * driver and store it in proper slot of timestamp ringbuffer.
         */

        /* Get current timestamp and count. */
        vblcount = atomic_read(&dev->vblank[crtc].count);
        drm_get_last_vbltimestamp(dev, crtc, &tvblank, DRM_CALLED_FROM_VBLIRQ);

        /* Compute time difference to timestamp of last vblank */
        diff_ns = timeval_to_ns(&tvblank) -
                  timeval_to_ns(&vblanktimestamp(dev, crtc, vblcount));

        /* Update vblank timestamp and count if at least
         * DRM_REDUNDANT_VBLIRQ_THRESH_NS nanoseconds
         * difference between last stored timestamp and current
         * timestamp. A smaller difference means basically
         * identical timestamps. Happens if this vblank has
         * been already processed and this is a redundant call,
         * e.g., due to spurious vblank interrupts. We need to
         * ignore those for accounting.
         */
        if (abs64(diff_ns) > DRM_REDUNDANT_VBLIRQ_THRESH_NS) {
                /* Store new timestamp in ringbuffer. */
                vblanktimestamp(dev, crtc, vblcount + 1) = tvblank;

                /* Increment cooked vblank count. This also atomically commits
                 * the timestamp computed above.
                 */
                smp_mb__before_atomic();
                atomic_inc(&dev->vblank[crtc].count);
                smp_mb__after_atomic();
        } else {
                DRM_DEBUG("crtc %d: Redundant vblirq ignored. diff_ns = %d\n",
                          crtc, (int) diff_ns);
        }

        wake_up(&dev->vblank[crtc].queue);
        drm_handle_vblank_events(dev, crtc);

        spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags);
        return true;
}
EXPORT_SYMBOL(drm_handle_vblank);