1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef __LINUX_GPIO_DRIVER_H
3 #define __LINUX_GPIO_DRIVER_H
5 #include <linux/bits.h>
6 #include <linux/cleanup.h>
8 #include <linux/irqchip/chained_irq.h>
9 #include <linux/irqdomain.h>
10 #include <linux/irqhandler.h>
11 #include <linux/lockdep.h>
12 #include <linux/pinctrl/pinconf-generic.h>
13 #include <linux/pinctrl/pinctrl.h>
14 #include <linux/property.h>
15 #include <linux/spinlock_types.h>
16 #include <linux/types.h>
18 #ifdef CONFIG_GENERIC_MSI_IRQ
26 struct of_phandle_args;
34 enum gpio_lookup_flags;
37 union gpio_irq_fwspec {
38 struct irq_fwspec fwspec;
39 #ifdef CONFIG_GENERIC_MSI_IRQ
40 msi_alloc_info_t msiinfo;
44 #define GPIO_LINE_DIRECTION_IN 1
45 #define GPIO_LINE_DIRECTION_OUT 0
48 * struct gpio_irq_chip - GPIO interrupt controller
50 struct gpio_irq_chip {
54 * GPIO IRQ chip implementation, provided by GPIO driver.
56 struct irq_chip *chip;
61 * Interrupt translation domain; responsible for mapping between GPIO
62 * hwirq number and Linux IRQ number.
64 struct irq_domain *domain;
66 #ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
70 * Firmware node corresponding to this gpiochip/irqchip, necessary
71 * for hierarchical irqdomain support.
73 struct fwnode_handle *fwnode;
78 * If non-NULL, will be set as the parent of this GPIO interrupt
79 * controller's IRQ domain to establish a hierarchical interrupt
80 * domain. The presence of this will activate the hierarchical
83 struct irq_domain *parent_domain;
86 * @child_to_parent_hwirq:
88 * This callback translates a child hardware IRQ offset to a parent
89 * hardware IRQ offset on a hierarchical interrupt chip. The child
90 * hardware IRQs correspond to the GPIO index 0..ngpio-1 (see the
91 * ngpio field of struct gpio_chip) and the corresponding parent
92 * hardware IRQ and type (such as IRQ_TYPE_*) shall be returned by
93 * the driver. The driver can calculate this from an offset or using
94 * a lookup table or whatever method is best for this chip. Return
95 * 0 on successful translation in the driver.
97 * If some ranges of hardware IRQs do not have a corresponding parent
98 * HWIRQ, return -EINVAL, but also make sure to fill in @valid_mask and
99 * @need_valid_mask to make these GPIO lines unavailable for
102 int (*child_to_parent_hwirq)(struct gpio_chip *gc,
103 unsigned int child_hwirq,
104 unsigned int child_type,
105 unsigned int *parent_hwirq,
106 unsigned int *parent_type);
109 * @populate_parent_alloc_arg :
111 * This optional callback allocates and populates the specific struct
112 * for the parent's IRQ domain. If this is not specified, then
113 * &gpiochip_populate_parent_fwspec_twocell will be used. A four-cell
114 * variant named &gpiochip_populate_parent_fwspec_fourcell is also
117 int (*populate_parent_alloc_arg)(struct gpio_chip *gc,
118 union gpio_irq_fwspec *fwspec,
119 unsigned int parent_hwirq,
120 unsigned int parent_type);
123 * @child_offset_to_irq:
125 * This optional callback is used to translate the child's GPIO line
126 * offset on the GPIO chip to an IRQ number for the GPIO to_irq()
127 * callback. If this is not specified, then a default callback will be
128 * provided that returns the line offset.
130 unsigned int (*child_offset_to_irq)(struct gpio_chip *gc,
134 * @child_irq_domain_ops:
136 * The IRQ domain operations that will be used for this GPIO IRQ
137 * chip. If no operations are provided, then default callbacks will
138 * be populated to setup the IRQ hierarchy. Some drivers need to
139 * supply their own translate function.
141 struct irq_domain_ops child_irq_domain_ops;
147 * The IRQ handler to use (often a predefined IRQ core function) for
148 * GPIO IRQs, provided by GPIO driver.
150 irq_flow_handler_t handler;
155 * Default IRQ triggering type applied during GPIO driver
156 * initialization, provided by GPIO driver.
158 unsigned int default_type;
163 * Per GPIO IRQ chip lockdep class for IRQ lock.
165 struct lock_class_key *lock_key;
170 * Per GPIO IRQ chip lockdep class for IRQ request.
172 struct lock_class_key *request_key;
177 * The interrupt handler for the GPIO chip's parent interrupts, may be
178 * NULL if the parent interrupts are nested rather than cascaded.
180 irq_flow_handler_t parent_handler;
184 * @parent_handler_data:
186 * If @per_parent_data is false, @parent_handler_data is a
187 * single pointer used as the data associated with every
190 void *parent_handler_data;
193 * @parent_handler_data_array:
195 * If @per_parent_data is true, @parent_handler_data_array is
196 * an array of @num_parents pointers, and is used to associate
197 * different data for each parent. This cannot be NULL if
198 * @per_parent_data is true.
200 void **parent_handler_data_array;
206 * The number of interrupt parents of a GPIO chip.
208 unsigned int num_parents;
213 * A list of interrupt parents of a GPIO chip. This is owned by the
214 * driver, so the core will only reference this list, not modify it.
216 unsigned int *parents;
221 * A list of interrupt parents for each line of a GPIO chip.
228 * True if set the interrupt handling uses nested threads.
235 * True if parent_handler_data_array describes a @num_parents
236 * sized array to be used as parent data.
238 bool per_parent_data;
243 * Flag to track GPIO chip irq member's initialization.
244 * This flag will make sure GPIO chip irq members are not used
245 * before they are initialized.
250 * @domain_is_allocated_externally:
252 * True it the irq_domain was allocated outside of gpiolib, in which
253 * case gpiolib won't free the irq_domain itself.
255 bool domain_is_allocated_externally;
258 * @init_hw: optional routine to initialize hardware before
259 * an IRQ chip will be added. This is quite useful when
260 * a particular driver wants to clear IRQ related registers
261 * in order to avoid undesired events.
263 int (*init_hw)(struct gpio_chip *gc);
266 * @init_valid_mask: optional routine to initialize @valid_mask, to be
267 * used if not all GPIO lines are valid interrupts. Sometimes some
268 * lines just cannot fire interrupts, and this routine, when defined,
269 * is passed a bitmap in "valid_mask" and it will have ngpios
270 * bits from 0..(ngpios-1) set to "1" as in valid. The callback can
271 * then directly set some bits to "0" if they cannot be used for
274 void (*init_valid_mask)(struct gpio_chip *gc,
275 unsigned long *valid_mask,
276 unsigned int ngpios);
281 * If not %NULL, holds bitmask of GPIOs which are valid to be included
282 * in IRQ domain of the chip.
284 unsigned long *valid_mask;
289 * Required for static IRQ allocation. If set, irq_domain_add_simple()
290 * will allocate and map all IRQs during initialization.
297 * Store old irq_chip irq_enable callback
299 void (*irq_enable)(struct irq_data *data);
304 * Store old irq_chip irq_disable callback
306 void (*irq_disable)(struct irq_data *data);
310 * Store old irq_chip irq_unmask callback
312 void (*irq_unmask)(struct irq_data *data);
317 * Store old irq_chip irq_mask callback
319 void (*irq_mask)(struct irq_data *data);
323 * struct gpio_chip - abstract a GPIO controller
324 * @label: a functional name for the GPIO device, such as a part
325 * number or the name of the SoC IP-block implementing it.
326 * @gpiodev: the internal state holder, opaque struct
327 * @parent: optional parent device providing the GPIOs
328 * @fwnode: optional fwnode providing this controller's properties
329 * @owner: helps prevent removal of modules exporting active GPIOs
330 * @request: optional hook for chip-specific activation, such as
331 * enabling module power and clock; may sleep
332 * @free: optional hook for chip-specific deactivation, such as
333 * disabling module power and clock; may sleep
334 * @get_direction: returns direction for signal "offset", 0=out, 1=in,
335 * (same as GPIO_LINE_DIRECTION_OUT / GPIO_LINE_DIRECTION_IN),
336 * or negative error. It is recommended to always implement this
337 * function, even on input-only or output-only gpio chips.
338 * @direction_input: configures signal "offset" as input, or returns error
339 * This can be omitted on input-only or output-only gpio chips.
340 * @direction_output: configures signal "offset" as output, or returns error
341 * This can be omitted on input-only or output-only gpio chips.
342 * @get: returns value for signal "offset", 0=low, 1=high, or negative error
343 * @get_multiple: reads values for multiple signals defined by "mask" and
344 * stores them in "bits", returns 0 on success or negative error
345 * @set: assigns output value for signal "offset"
346 * @set_multiple: assigns output values for multiple signals defined by "mask"
347 * @set_config: optional hook for all kinds of settings. Uses the same
348 * packed config format as generic pinconf.
349 * @to_irq: optional hook supporting non-static gpiod_to_irq() mappings;
350 * implementation may not sleep
351 * @dbg_show: optional routine to show contents in debugfs; default code
352 * will be used when this is omitted, but custom code can show extra
353 * state (such as pullup/pulldown configuration).
354 * @init_valid_mask: optional routine to initialize @valid_mask, to be used if
355 * not all GPIOs are valid.
356 * @add_pin_ranges: optional routine to initialize pin ranges, to be used when
357 * requires special mapping of the pins that provides GPIO functionality.
358 * It is called after adding GPIO chip and before adding IRQ chip.
359 * @en_hw_timestamp: Dependent on GPIO chip, an optional routine to
360 * enable hardware timestamp.
361 * @dis_hw_timestamp: Dependent on GPIO chip, an optional routine to
362 * disable hardware timestamp.
363 * @base: identifies the first GPIO number handled by this chip;
364 * or, if negative during registration, requests dynamic ID allocation.
365 * DEPRECATION: providing anything non-negative and nailing the base
366 * offset of GPIO chips is deprecated. Please pass -1 as base to
367 * let gpiolib select the chip base in all possible cases. We want to
368 * get rid of the static GPIO number space in the long run.
369 * @ngpio: the number of GPIOs handled by this controller; the last GPIO
370 * handled is (base + ngpio - 1).
371 * @offset: when multiple gpio chips belong to the same device this
372 * can be used as offset within the device so friendly names can
373 * be properly assigned.
374 * @names: if set, must be an array of strings to use as alternative
375 * names for the GPIOs in this chip. Any entry in the array
376 * may be NULL if there is no alias for the GPIO, however the
377 * array must be @ngpio entries long. A name can include a single printk
378 * format specifier for an unsigned int. It is substituted by the actual
379 * number of the gpio.
380 * @can_sleep: flag must be set iff get()/set() methods sleep, as they
381 * must while accessing GPIO expander chips over I2C or SPI. This
382 * implies that if the chip supports IRQs, these IRQs need to be threaded
383 * as the chip access may sleep when e.g. reading out the IRQ status
385 * @read_reg: reader function for generic GPIO
386 * @write_reg: writer function for generic GPIO
387 * @be_bits: if the generic GPIO has big endian bit order (bit 31 is representing
388 * line 0, bit 30 is line 1 ... bit 0 is line 31) this is set to true by the
389 * generic GPIO core. It is for internal housekeeping only.
390 * @reg_dat: data (in) register for generic GPIO
391 * @reg_set: output set register (out=high) for generic GPIO
392 * @reg_clr: output clear register (out=low) for generic GPIO
393 * @reg_dir_out: direction out setting register for generic GPIO
394 * @reg_dir_in: direction in setting register for generic GPIO
395 * @bgpio_dir_unreadable: indicates that the direction register(s) cannot
396 * be read and we need to rely on out internal state tracking.
397 * @bgpio_bits: number of register bits used for a generic GPIO i.e.
398 * <register width> * 8
399 * @bgpio_lock: used to lock chip->bgpio_data. Also, this is needed to keep
400 * shadowed and real data registers writes together.
401 * @bgpio_data: shadowed data register for generic GPIO to clear/set bits
403 * @bgpio_dir: shadowed direction register for generic GPIO to clear/set
404 * direction safely. A "1" in this word means the line is set as
407 * A gpio_chip can help platforms abstract various sources of GPIOs so
408 * they can all be accessed through a common programming interface.
409 * Example sources would be SOC controllers, FPGAs, multifunction
410 * chips, dedicated GPIO expanders, and so on.
412 * Each chip controls a number of signals, identified in method calls
413 * by "offset" values in the range 0..(@ngpio - 1). When those signals
414 * are referenced through calls like gpio_get_value(gpio), the offset
415 * is calculated by subtracting @base from the gpio number.
419 struct gpio_device *gpiodev;
420 struct device *parent;
421 struct fwnode_handle *fwnode;
422 struct module *owner;
424 int (*request)(struct gpio_chip *gc,
425 unsigned int offset);
426 void (*free)(struct gpio_chip *gc,
427 unsigned int offset);
428 int (*get_direction)(struct gpio_chip *gc,
429 unsigned int offset);
430 int (*direction_input)(struct gpio_chip *gc,
431 unsigned int offset);
432 int (*direction_output)(struct gpio_chip *gc,
433 unsigned int offset, int value);
434 int (*get)(struct gpio_chip *gc,
435 unsigned int offset);
436 int (*get_multiple)(struct gpio_chip *gc,
438 unsigned long *bits);
439 void (*set)(struct gpio_chip *gc,
440 unsigned int offset, int value);
441 void (*set_multiple)(struct gpio_chip *gc,
443 unsigned long *bits);
444 int (*set_config)(struct gpio_chip *gc,
446 unsigned long config);
447 int (*to_irq)(struct gpio_chip *gc,
448 unsigned int offset);
450 void (*dbg_show)(struct seq_file *s,
451 struct gpio_chip *gc);
453 int (*init_valid_mask)(struct gpio_chip *gc,
454 unsigned long *valid_mask,
455 unsigned int ngpios);
457 int (*add_pin_ranges)(struct gpio_chip *gc);
459 int (*en_hw_timestamp)(struct gpio_chip *gc,
461 unsigned long flags);
462 int (*dis_hw_timestamp)(struct gpio_chip *gc,
464 unsigned long flags);
468 const char *const *names;
471 #if IS_ENABLED(CONFIG_GPIO_GENERIC)
472 unsigned long (*read_reg)(void __iomem *reg);
473 void (*write_reg)(void __iomem *reg, unsigned long data);
475 void __iomem *reg_dat;
476 void __iomem *reg_set;
477 void __iomem *reg_clr;
478 void __iomem *reg_dir_out;
479 void __iomem *reg_dir_in;
480 bool bgpio_dir_unreadable;
482 raw_spinlock_t bgpio_lock;
483 unsigned long bgpio_data;
484 unsigned long bgpio_dir;
485 #endif /* CONFIG_GPIO_GENERIC */
487 #ifdef CONFIG_GPIOLIB_IRQCHIP
489 * With CONFIG_GPIOLIB_IRQCHIP we get an irqchip inside the gpiolib
490 * to handle IRQs for most practical cases.
496 * Integrates interrupt chip functionality with the GPIO chip. Can be
497 * used to handle IRQs for most practical cases.
499 struct gpio_irq_chip irq;
500 #endif /* CONFIG_GPIOLIB_IRQCHIP */
505 * If not %NULL, holds bitmask of GPIOs which are valid to be used
508 unsigned long *valid_mask;
510 #if defined(CONFIG_OF_GPIO)
512 * If CONFIG_OF_GPIO is enabled, then all GPIO controllers described in
513 * the device tree automatically may have an OF translation
519 * Number of cells used to form the GPIO specifier.
521 unsigned int of_gpio_n_cells;
526 * Callback to translate a device tree GPIO specifier into a chip-
527 * relative GPIO number and flags.
529 int (*of_xlate)(struct gpio_chip *gc,
530 const struct of_phandle_args *gpiospec, u32 *flags);
531 #endif /* CONFIG_OF_GPIO */
534 char *gpiochip_dup_line_label(struct gpio_chip *gc, unsigned int offset);
537 struct _gpiochip_for_each_data {
542 DEFINE_CLASS(_gpiochip_for_each_data,
543 struct _gpiochip_for_each_data,
544 if (*_T.label) kfree(*_T.label),
546 struct _gpiochip_for_each_data _data = { label, i };
550 const char **label, int *i)
553 * for_each_requested_gpio_in_range - iterates over requested GPIOs in a given range
554 * @_chip: the chip to query
556 * @_base: first GPIO in the range
557 * @_size: amount of GPIOs to check starting from @base
558 * @_label: label of current GPIO
560 #define for_each_requested_gpio_in_range(_chip, _i, _base, _size, _label) \
561 for (CLASS(_gpiochip_for_each_data, _data)(&_label, &_i); \
563 (*_data.i)++, kfree(*(_data.label)), *_data.label = NULL) \
564 if ((*_data.label = \
565 gpiochip_dup_line_label(_chip, _base + *_data.i)) == NULL) {} \
566 else if (IS_ERR(*_data.label)) {} \
569 /* Iterates over all requested GPIO of the given @chip */
570 #define for_each_requested_gpio(chip, i, label) \
571 for_each_requested_gpio_in_range(chip, i, 0, chip->ngpio, label)
573 /* add/remove chips */
574 int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
575 struct lock_class_key *lock_key,
576 struct lock_class_key *request_key);
579 * gpiochip_add_data() - register a gpio_chip
580 * @gc: the chip to register, with gc->base initialized
581 * @data: driver-private data associated with this chip
583 * Context: potentially before irqs will work
585 * When gpiochip_add_data() is called very early during boot, so that GPIOs
586 * can be freely used, the gc->parent device must be registered before
587 * the gpio framework's arch_initcall(). Otherwise sysfs initialization
588 * for GPIOs will fail rudely.
590 * gpiochip_add_data() must only be called after gpiolib initialization,
591 * i.e. after core_initcall().
593 * If gc->base is negative, this requests dynamic assignment of
594 * a range of valid GPIOs.
597 * A negative errno if the chip can't be registered, such as because the
598 * gc->base is invalid or already associated with a different chip.
599 * Otherwise it returns zero as a success code.
601 #ifdef CONFIG_LOCKDEP
602 #define gpiochip_add_data(gc, data) ({ \
603 static struct lock_class_key lock_key; \
604 static struct lock_class_key request_key; \
605 gpiochip_add_data_with_key(gc, data, &lock_key, \
608 #define devm_gpiochip_add_data(dev, gc, data) ({ \
609 static struct lock_class_key lock_key; \
610 static struct lock_class_key request_key; \
611 devm_gpiochip_add_data_with_key(dev, gc, data, &lock_key, \
615 #define gpiochip_add_data(gc, data) gpiochip_add_data_with_key(gc, data, NULL, NULL)
616 #define devm_gpiochip_add_data(dev, gc, data) \
617 devm_gpiochip_add_data_with_key(dev, gc, data, NULL, NULL)
618 #endif /* CONFIG_LOCKDEP */
620 static inline int gpiochip_add(struct gpio_chip *gc)
622 return gpiochip_add_data(gc, NULL);
624 void gpiochip_remove(struct gpio_chip *gc);
625 int devm_gpiochip_add_data_with_key(struct device *dev, struct gpio_chip *gc,
626 void *data, struct lock_class_key *lock_key,
627 struct lock_class_key *request_key);
629 struct gpio_device *gpio_device_find(void *data,
630 int (*match)(struct gpio_chip *gc, void *data));
631 struct gpio_device *gpio_device_find_by_label(const char *label);
632 struct gpio_device *gpio_device_find_by_fwnode(const struct fwnode_handle *fwnode);
634 struct gpio_device *gpio_device_get(struct gpio_device *gdev);
635 void gpio_device_put(struct gpio_device *gdev);
637 DEFINE_FREE(gpio_device_put, struct gpio_device *,
638 if (!IS_ERR_OR_NULL(_T)) gpio_device_put(_T))
640 struct device *gpio_device_to_device(struct gpio_device *gdev);
642 bool gpiochip_line_is_irq(struct gpio_chip *gc, unsigned int offset);
643 int gpiochip_reqres_irq(struct gpio_chip *gc, unsigned int offset);
644 void gpiochip_relres_irq(struct gpio_chip *gc, unsigned int offset);
645 void gpiochip_disable_irq(struct gpio_chip *gc, unsigned int offset);
646 void gpiochip_enable_irq(struct gpio_chip *gc, unsigned int offset);
648 /* irq_data versions of the above */
649 int gpiochip_irq_reqres(struct irq_data *data);
650 void gpiochip_irq_relres(struct irq_data *data);
652 /* Paste this in your irq_chip structure */
653 #define GPIOCHIP_IRQ_RESOURCE_HELPERS \
654 .irq_request_resources = gpiochip_irq_reqres, \
655 .irq_release_resources = gpiochip_irq_relres
657 static inline void gpio_irq_chip_set_chip(struct gpio_irq_chip *girq,
658 const struct irq_chip *chip)
660 /* Yes, dropping const is ugly, but it isn't like we have a choice */
661 girq->chip = (struct irq_chip *)chip;
664 /* Line status inquiry for drivers */
665 bool gpiochip_line_is_open_drain(struct gpio_chip *gc, unsigned int offset);
666 bool gpiochip_line_is_open_source(struct gpio_chip *gc, unsigned int offset);
668 /* Sleep persistence inquiry for drivers */
669 bool gpiochip_line_is_persistent(struct gpio_chip *gc, unsigned int offset);
670 bool gpiochip_line_is_valid(const struct gpio_chip *gc, unsigned int offset);
672 /* get driver data */
673 void *gpiochip_get_data(struct gpio_chip *gc);
681 #ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
683 int gpiochip_populate_parent_fwspec_twocell(struct gpio_chip *gc,
684 union gpio_irq_fwspec *gfwspec,
685 unsigned int parent_hwirq,
686 unsigned int parent_type);
687 int gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *gc,
688 union gpio_irq_fwspec *gfwspec,
689 unsigned int parent_hwirq,
690 unsigned int parent_type);
692 #endif /* CONFIG_IRQ_DOMAIN_HIERARCHY */
694 int bgpio_init(struct gpio_chip *gc, struct device *dev,
695 unsigned long sz, void __iomem *dat, void __iomem *set,
696 void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
697 unsigned long flags);
699 #define BGPIOF_BIG_ENDIAN BIT(0)
700 #define BGPIOF_UNREADABLE_REG_SET BIT(1) /* reg_set is unreadable */
701 #define BGPIOF_UNREADABLE_REG_DIR BIT(2) /* reg_dir is unreadable */
702 #define BGPIOF_BIG_ENDIAN_BYTE_ORDER BIT(3)
703 #define BGPIOF_READ_OUTPUT_REG_SET BIT(4) /* reg_set stores output value */
704 #define BGPIOF_NO_OUTPUT BIT(5) /* only input */
705 #define BGPIOF_NO_SET_ON_INPUT BIT(6)
707 int gpiochip_irq_map(struct irq_domain *d, unsigned int irq,
708 irq_hw_number_t hwirq);
709 void gpiochip_irq_unmap(struct irq_domain *d, unsigned int irq);
711 int gpiochip_irq_domain_activate(struct irq_domain *domain,
712 struct irq_data *data, bool reserve);
713 void gpiochip_irq_domain_deactivate(struct irq_domain *domain,
714 struct irq_data *data);
716 bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gc,
717 unsigned int offset);
719 #ifdef CONFIG_GPIOLIB_IRQCHIP
720 int gpiochip_irqchip_add_domain(struct gpio_chip *gc,
721 struct irq_domain *domain);
726 static inline int gpiochip_irqchip_add_domain(struct gpio_chip *gc,
727 struct irq_domain *domain)
734 int gpiochip_generic_request(struct gpio_chip *gc, unsigned int offset);
735 void gpiochip_generic_free(struct gpio_chip *gc, unsigned int offset);
736 int gpiochip_generic_config(struct gpio_chip *gc, unsigned int offset,
737 unsigned long config);
740 * struct gpio_pin_range - pin range controlled by a gpio chip
741 * @node: list for maintaining set of pin ranges, used internally
742 * @pctldev: pinctrl device which handles corresponding pins
743 * @range: actual range of pins controlled by a gpio controller
745 struct gpio_pin_range {
746 struct list_head node;
747 struct pinctrl_dev *pctldev;
748 struct pinctrl_gpio_range range;
751 #ifdef CONFIG_PINCTRL
753 int gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
754 unsigned int gpio_offset, unsigned int pin_offset,
756 int gpiochip_add_pingroup_range(struct gpio_chip *gc,
757 struct pinctrl_dev *pctldev,
758 unsigned int gpio_offset, const char *pin_group);
759 void gpiochip_remove_pin_ranges(struct gpio_chip *gc);
761 #else /* ! CONFIG_PINCTRL */
764 gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name,
765 unsigned int gpio_offset, unsigned int pin_offset,
771 gpiochip_add_pingroup_range(struct gpio_chip *gc,
772 struct pinctrl_dev *pctldev,
773 unsigned int gpio_offset, const char *pin_group)
779 gpiochip_remove_pin_ranges(struct gpio_chip *gc)
783 #endif /* CONFIG_PINCTRL */
785 struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *gc,
788 enum gpio_lookup_flags lflags,
789 enum gpiod_flags dflags);
790 void gpiochip_free_own_desc(struct gpio_desc *desc);
792 struct gpio_desc *gpiochip_get_desc(struct gpio_chip *gc, unsigned int hwnum);
794 gpio_device_get_desc(struct gpio_device *gdev, unsigned int hwnum);
796 struct gpio_chip *gpio_device_get_chip(struct gpio_device *gdev);
798 #ifdef CONFIG_GPIOLIB
800 /* lock/unlock as IRQ */
801 int gpiochip_lock_as_irq(struct gpio_chip *gc, unsigned int offset);
802 void gpiochip_unlock_as_irq(struct gpio_chip *gc, unsigned int offset);
804 struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc);
805 struct gpio_device *gpiod_to_gpio_device(struct gpio_desc *desc);
807 /* struct gpio_device getters */
808 int gpio_device_get_base(struct gpio_device *gdev);
809 const char *gpio_device_get_label(struct gpio_device *gdev);
811 #else /* CONFIG_GPIOLIB */
815 static inline struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
817 /* GPIO can never have been requested */
819 return ERR_PTR(-ENODEV);
822 static inline struct gpio_device *gpiod_to_gpio_device(struct gpio_desc *desc)
825 return ERR_PTR(-ENODEV);
828 static inline int gpio_device_get_base(struct gpio_device *gdev)
834 static inline const char *gpio_device_get_label(struct gpio_device *gdev)
840 static inline int gpiochip_lock_as_irq(struct gpio_chip *gc,
847 static inline void gpiochip_unlock_as_irq(struct gpio_chip *gc,
852 #endif /* CONFIG_GPIOLIB */
854 #define for_each_gpiochip_node(dev, child) \
855 device_for_each_child_node(dev, child) \
856 if (!fwnode_property_present(child, "gpio-controller")) {} else
858 static inline unsigned int gpiochip_node_count(struct device *dev)
860 struct fwnode_handle *child;
861 unsigned int count = 0;
863 for_each_gpiochip_node(dev, child)
869 static inline struct fwnode_handle *gpiochip_node_get_first(struct device *dev)
871 struct fwnode_handle *fwnode;
873 for_each_gpiochip_node(dev, fwnode)
879 #endif /* __LINUX_GPIO_DRIVER_H */