1 // SPDX-License-Identifier: GPL-2.0+
3 * storage_common.c -- Common definitions for mass storage functionality
5 * Copyright (C) 2003-2008 Alan Stern
6 * Copyeight (C) 2009 Samsung Electronics
11 * This file requires the following identifiers used in USB strings to
12 * be defined (each of type pointer to char):
13 * - fsg_string_interface -- name of the interface
17 * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers
18 * sets the number of pipeline buffers (length of the fsg_buffhd array).
19 * The valid range of num_buffers is: num >= 2 && num <= 4.
22 #include <linux/module.h>
23 #include <linux/blkdev.h>
24 #include <linux/file.h>
26 #include <linux/usb/composite.h>
28 #include "storage_common.h"
30 /* There is only one interface. */
32 struct usb_interface_descriptor fsg_intf_desc = {
33 .bLength = sizeof fsg_intf_desc,
34 .bDescriptorType = USB_DT_INTERFACE,
36 .bNumEndpoints = 2, /* Adjusted during fsg_bind() */
37 .bInterfaceClass = USB_CLASS_MASS_STORAGE,
38 .bInterfaceSubClass = USB_SC_SCSI, /* Adjusted during fsg_bind() */
39 .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */
40 .iInterface = FSG_STRING_INTERFACE,
42 EXPORT_SYMBOL_GPL(fsg_intf_desc);
45 * Three full-speed endpoint descriptors: bulk-in, bulk-out, and
49 struct usb_endpoint_descriptor fsg_fs_bulk_in_desc = {
50 .bLength = USB_DT_ENDPOINT_SIZE,
51 .bDescriptorType = USB_DT_ENDPOINT,
53 .bEndpointAddress = USB_DIR_IN,
54 .bmAttributes = USB_ENDPOINT_XFER_BULK,
55 /* wMaxPacketSize set by autoconfiguration */
57 EXPORT_SYMBOL_GPL(fsg_fs_bulk_in_desc);
59 struct usb_endpoint_descriptor fsg_fs_bulk_out_desc = {
60 .bLength = USB_DT_ENDPOINT_SIZE,
61 .bDescriptorType = USB_DT_ENDPOINT,
63 .bEndpointAddress = USB_DIR_OUT,
64 .bmAttributes = USB_ENDPOINT_XFER_BULK,
65 /* wMaxPacketSize set by autoconfiguration */
67 EXPORT_SYMBOL_GPL(fsg_fs_bulk_out_desc);
69 struct usb_descriptor_header *fsg_fs_function[] = {
70 (struct usb_descriptor_header *) &fsg_intf_desc,
71 (struct usb_descriptor_header *) &fsg_fs_bulk_in_desc,
72 (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc,
75 EXPORT_SYMBOL_GPL(fsg_fs_function);
79 * USB 2.0 devices need to expose both high speed and full speed
80 * descriptors, unless they only run at full speed.
82 * That means alternate endpoint descriptors (bigger packets).
84 struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = {
85 .bLength = USB_DT_ENDPOINT_SIZE,
86 .bDescriptorType = USB_DT_ENDPOINT,
88 /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
89 .bmAttributes = USB_ENDPOINT_XFER_BULK,
90 .wMaxPacketSize = cpu_to_le16(512),
92 EXPORT_SYMBOL_GPL(fsg_hs_bulk_in_desc);
94 struct usb_endpoint_descriptor fsg_hs_bulk_out_desc = {
95 .bLength = USB_DT_ENDPOINT_SIZE,
96 .bDescriptorType = USB_DT_ENDPOINT,
98 /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
99 .bmAttributes = USB_ENDPOINT_XFER_BULK,
100 .wMaxPacketSize = cpu_to_le16(512),
101 .bInterval = 1, /* NAK every 1 uframe */
103 EXPORT_SYMBOL_GPL(fsg_hs_bulk_out_desc);
106 struct usb_descriptor_header *fsg_hs_function[] = {
107 (struct usb_descriptor_header *) &fsg_intf_desc,
108 (struct usb_descriptor_header *) &fsg_hs_bulk_in_desc,
109 (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc,
112 EXPORT_SYMBOL_GPL(fsg_hs_function);
114 struct usb_endpoint_descriptor fsg_ss_bulk_in_desc = {
115 .bLength = USB_DT_ENDPOINT_SIZE,
116 .bDescriptorType = USB_DT_ENDPOINT,
118 /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
119 .bmAttributes = USB_ENDPOINT_XFER_BULK,
120 .wMaxPacketSize = cpu_to_le16(1024),
122 EXPORT_SYMBOL_GPL(fsg_ss_bulk_in_desc);
124 struct usb_ss_ep_comp_descriptor fsg_ss_bulk_in_comp_desc = {
125 .bLength = sizeof(fsg_ss_bulk_in_comp_desc),
126 .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
128 /*.bMaxBurst = DYNAMIC, */
130 EXPORT_SYMBOL_GPL(fsg_ss_bulk_in_comp_desc);
132 struct usb_endpoint_descriptor fsg_ss_bulk_out_desc = {
133 .bLength = USB_DT_ENDPOINT_SIZE,
134 .bDescriptorType = USB_DT_ENDPOINT,
136 /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
137 .bmAttributes = USB_ENDPOINT_XFER_BULK,
138 .wMaxPacketSize = cpu_to_le16(1024),
140 EXPORT_SYMBOL_GPL(fsg_ss_bulk_out_desc);
142 struct usb_ss_ep_comp_descriptor fsg_ss_bulk_out_comp_desc = {
143 .bLength = sizeof(fsg_ss_bulk_in_comp_desc),
144 .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
146 /*.bMaxBurst = DYNAMIC, */
148 EXPORT_SYMBOL_GPL(fsg_ss_bulk_out_comp_desc);
150 struct usb_descriptor_header *fsg_ss_function[] = {
151 (struct usb_descriptor_header *) &fsg_intf_desc,
152 (struct usb_descriptor_header *) &fsg_ss_bulk_in_desc,
153 (struct usb_descriptor_header *) &fsg_ss_bulk_in_comp_desc,
154 (struct usb_descriptor_header *) &fsg_ss_bulk_out_desc,
155 (struct usb_descriptor_header *) &fsg_ss_bulk_out_comp_desc,
158 EXPORT_SYMBOL_GPL(fsg_ss_function);
161 /*-------------------------------------------------------------------------*/
164 * If the next two routines are called while the gadget is registered,
165 * the caller must own fsg->filesem for writing.
168 void fsg_lun_close(struct fsg_lun *curlun)
171 LDBG(curlun, "close backing file\n");
176 EXPORT_SYMBOL_GPL(fsg_lun_close);
178 int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
181 struct file *filp = NULL;
183 struct inode *inode = NULL;
187 unsigned int blkbits;
188 unsigned int blksize;
190 /* R/W if we can, R/O if we must */
191 ro = curlun->initially_ro;
193 filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0);
194 if (PTR_ERR(filp) == -EROFS || PTR_ERR(filp) == -EACCES)
198 filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0);
200 LINFO(curlun, "unable to open backing file: %s\n", filename);
201 return PTR_ERR(filp);
204 if (!(filp->f_mode & FMODE_WRITE))
207 inode = file_inode(filp);
208 if ((!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode))) {
209 LINFO(curlun, "invalid file type: %s\n", filename);
214 * If we can't read the file, it's no good.
215 * If we can't write the file, use it read-only.
217 if (!(filp->f_mode & FMODE_CAN_READ)) {
218 LINFO(curlun, "file not readable: %s\n", filename);
221 if (!(filp->f_mode & FMODE_CAN_WRITE))
224 size = i_size_read(inode->i_mapping->host);
226 LINFO(curlun, "unable to find file size: %s\n", filename);
234 } else if (inode->i_bdev) {
235 blksize = bdev_logical_block_size(inode->i_bdev);
236 blkbits = blksize_bits(blksize);
242 num_sectors = size >> blkbits; /* File size in logic-block-size blocks */
245 min_sectors = 300; /* Smallest track is 300 frames */
246 if (num_sectors >= 256*60*75) {
247 num_sectors = 256*60*75 - 1;
248 LINFO(curlun, "file too big: %s\n", filename);
249 LINFO(curlun, "using only first %d blocks\n",
253 if (num_sectors < min_sectors) {
254 LINFO(curlun, "file too small: %s\n", filename);
259 if (fsg_lun_is_open(curlun))
260 fsg_lun_close(curlun);
262 curlun->blksize = blksize;
263 curlun->blkbits = blkbits;
266 curlun->file_length = size;
267 curlun->num_sectors = num_sectors;
268 LDBG(curlun, "open backing file: %s\n", filename);
275 EXPORT_SYMBOL_GPL(fsg_lun_open);
278 /*-------------------------------------------------------------------------*/
281 * Sync the file data, don't bother with the metadata.
282 * This code was copied from fs/buffer.c:sys_fdatasync().
284 int fsg_lun_fsync_sub(struct fsg_lun *curlun)
286 struct file *filp = curlun->filp;
288 if (curlun->ro || !filp)
290 return vfs_fsync(filp, 1);
292 EXPORT_SYMBOL_GPL(fsg_lun_fsync_sub);
294 void store_cdrom_address(u8 *dest, int msf, u32 addr)
297 /* Convert to Minutes-Seconds-Frames */
298 addr >>= 2; /* Convert to 2048-byte frames */
299 addr += 2*75; /* Lead-in occupies 2 seconds */
300 dest[3] = addr % 75; /* Frames */
302 dest[2] = addr % 60; /* Seconds */
304 dest[1] = addr; /* Minutes */
305 dest[0] = 0; /* Reserved */
307 /* Absolute sector */
308 put_unaligned_be32(addr, dest);
311 EXPORT_SYMBOL_GPL(store_cdrom_address);
313 /*-------------------------------------------------------------------------*/
316 ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf)
318 return sprintf(buf, "%d\n", fsg_lun_is_open(curlun)
320 : curlun->initially_ro);
322 EXPORT_SYMBOL_GPL(fsg_show_ro);
324 ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf)
326 return sprintf(buf, "%u\n", curlun->nofua);
328 EXPORT_SYMBOL_GPL(fsg_show_nofua);
330 ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
337 if (fsg_lun_is_open(curlun)) { /* Get the complete pathname */
338 p = file_path(curlun->filp, buf, PAGE_SIZE - 1);
344 buf[rc] = '\n'; /* Add a newline */
347 } else { /* No file, return 0 bytes */
354 EXPORT_SYMBOL_GPL(fsg_show_file);
356 ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf)
358 return sprintf(buf, "%u\n", curlun->cdrom);
360 EXPORT_SYMBOL_GPL(fsg_show_cdrom);
362 ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf)
364 return sprintf(buf, "%u\n", curlun->removable);
366 EXPORT_SYMBOL_GPL(fsg_show_removable);
368 ssize_t fsg_show_inquiry_string(struct fsg_lun *curlun, char *buf)
370 return sprintf(buf, "%s\n", curlun->inquiry_string);
372 EXPORT_SYMBOL_GPL(fsg_show_inquiry_string);
375 * The caller must hold fsg->filesem for reading when calling this function.
377 static ssize_t _fsg_store_ro(struct fsg_lun *curlun, bool ro)
379 if (fsg_lun_is_open(curlun)) {
380 LDBG(curlun, "read-only status change prevented\n");
385 curlun->initially_ro = ro;
386 LDBG(curlun, "read-only status set to %d\n", curlun->ro);
391 ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem,
392 const char *buf, size_t count)
397 rc = strtobool(buf, &ro);
402 * Allow the write-enable status to change only while the
403 * backing file is closed.
406 rc = _fsg_store_ro(curlun, ro);
413 EXPORT_SYMBOL_GPL(fsg_store_ro);
415 ssize_t fsg_store_nofua(struct fsg_lun *curlun, const char *buf, size_t count)
420 ret = strtobool(buf, &nofua);
424 /* Sync data when switching from async mode to sync */
425 if (!nofua && curlun->nofua)
426 fsg_lun_fsync_sub(curlun);
428 curlun->nofua = nofua;
432 EXPORT_SYMBOL_GPL(fsg_store_nofua);
434 ssize_t fsg_store_file(struct fsg_lun *curlun, struct rw_semaphore *filesem,
435 const char *buf, size_t count)
439 if (curlun->prevent_medium_removal && fsg_lun_is_open(curlun)) {
440 LDBG(curlun, "eject attempt prevented\n");
441 return -EBUSY; /* "Door is locked" */
444 /* Remove a trailing newline */
445 if (count > 0 && buf[count-1] == '\n')
446 ((char *) buf)[count-1] = 0; /* Ugh! */
448 /* Load new medium */
450 if (count > 0 && buf[0]) {
451 /* fsg_lun_open() will close existing file if any. */
452 rc = fsg_lun_open(curlun, buf);
454 curlun->unit_attention_data =
455 SS_NOT_READY_TO_READY_TRANSITION;
456 } else if (fsg_lun_is_open(curlun)) {
457 fsg_lun_close(curlun);
458 curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
461 return (rc < 0 ? rc : count);
463 EXPORT_SYMBOL_GPL(fsg_store_file);
465 ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem,
466 const char *buf, size_t count)
471 ret = strtobool(buf, &cdrom);
476 ret = cdrom ? _fsg_store_ro(curlun, true) : 0;
479 curlun->cdrom = cdrom;
486 EXPORT_SYMBOL_GPL(fsg_store_cdrom);
488 ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf,
494 ret = strtobool(buf, &removable);
498 curlun->removable = removable;
502 EXPORT_SYMBOL_GPL(fsg_store_removable);
504 ssize_t fsg_store_inquiry_string(struct fsg_lun *curlun, const char *buf,
507 const size_t len = min(count, sizeof(curlun->inquiry_string));
509 if (len == 0 || buf[0] == '\n') {
510 curlun->inquiry_string[0] = 0;
512 snprintf(curlun->inquiry_string,
513 sizeof(curlun->inquiry_string), "%-28s", buf);
514 if (curlun->inquiry_string[len-1] == '\n')
515 curlun->inquiry_string[len-1] = ' ';
520 EXPORT_SYMBOL_GPL(fsg_store_inquiry_string);
522 MODULE_LICENSE("GPL");