drivers/scsi/mpt3sas/mpt3sas_ctl.c

   1 /*
   2  * Management Module Support for MPT (Message Passing Technology) based
   3  * controllers
   4  *
   5  * This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.c
   6  * Copyright (C) 2012-2014  LSI Corporation
   7  * Copyright (C) 2013-2014 Avago Technologies
   8  *  (mailto: [email protected])
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License
  12  * as published by the Free Software Foundation; either version 2
  13  * of the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * NO WARRANTY
  21  * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  22  * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  23  * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  24  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  25  * solely responsible for determining the appropriateness of using and
  26  * distributing the Program and assumes all risks associated with its
  27  * exercise of rights under this Agreement, including but not limited to
  28  * the risks and costs of program errors, damage to or loss of data,
  29  * programs or equipment, and unavailability or interruption of operations.
  30
  31  * DISCLAIMER OF LIABILITY
  32  * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  33  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  34  * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  35  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  36  * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  37  * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  38  * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  39
  40  * You should have received a copy of the GNU General Public License
  41  * along with this program; if not, write to the Free Software
  42  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
  43  * USA.
  44  */
  45
  46 #include <linux/kernel.h>
  47 #include <linux/module.h>
  48 #include <linux/errno.h>
  49 #include <linux/init.h>
  50 #include <linux/slab.h>
  51 #include <linux/types.h>
  52 #include <linux/pci.h>
  53 #include <linux/delay.h>
  54 #include <linux/compat.h>
  55 #include <linux/poll.h>
  56
  57 #include <linux/io.h>
  58 #include <linux/uaccess.h>
  59
  60 #include "mpt3sas_base.h"
  61 #include "mpt3sas_ctl.h"
  62
  63
  64 static struct fasync_struct *async_queue;
  65 static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
  66
  67
  68 /**
  69  * enum block_state - blocking state
  70  * @NON_BLOCKING: non blocking
  71  * @BLOCKING: blocking
  72  *
  73  * These states are for ioctls that need to wait for a response
  74  * from firmware, so they probably require sleep.
  75  */
  76 enum block_state {
  77         NON_BLOCKING,
  78         BLOCKING,
  79 };
  80
  81 /**
  82  * _ctl_display_some_debug - debug routine
  83  * @ioc: per adapter object
  84  * @smid: system request message index
  85  * @calling_function_name: string pass from calling function
  86  * @mpi_reply: reply message frame
  87  * Context: none.
  88  *
  89  * Function for displaying debug info helpful when debugging issues
  90  * in this module.
  91  */
  92 static void
  93 _ctl_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
  94         char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
  95 {
  96         Mpi2ConfigRequest_t *mpi_request;
  97         char *desc = NULL;
  98
  99         if (!(ioc->logging_level & MPT_DEBUG_IOCTL))
 100                 return;
 101
 102         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
 103         switch (mpi_request->Function) {
 104         case MPI2_FUNCTION_SCSI_IO_REQUEST:
 105         {
 106                 Mpi2SCSIIORequest_t *scsi_request =
 107                     (Mpi2SCSIIORequest_t *)mpi_request;
 108
 109                 snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
 110                     "scsi_io, cmd(0x%02x), cdb_len(%d)",
 111                     scsi_request->CDB.CDB32[0],
 112                     le16_to_cpu(scsi_request->IoFlags) & 0xF);
 113                 desc = ioc->tmp_string;
 114                 break;
 115         }
 116         case MPI2_FUNCTION_SCSI_TASK_MGMT:
 117                 desc = "task_mgmt";
 118                 break;
 119         case MPI2_FUNCTION_IOC_INIT:
 120                 desc = "ioc_init";
 121                 break;
 122         case MPI2_FUNCTION_IOC_FACTS:
 123                 desc = "ioc_facts";
 124                 break;
 125         case MPI2_FUNCTION_CONFIG:
 126         {
 127                 Mpi2ConfigRequest_t *config_request =
 128                     (Mpi2ConfigRequest_t *)mpi_request;
 129
 130                 snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
 131                     "config, type(0x%02x), ext_type(0x%02x), number(%d)",
 132                     (config_request->Header.PageType &
 133                      MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType,
 134                     config_request->Header.PageNumber);
 135                 desc = ioc->tmp_string;
 136                 break;
 137         }
 138         case MPI2_FUNCTION_PORT_FACTS:
 139                 desc = "port_facts";
 140                 break;
 141         case MPI2_FUNCTION_PORT_ENABLE:
 142                 desc = "port_enable";
 143                 break;
 144         case MPI2_FUNCTION_EVENT_NOTIFICATION:
 145                 desc = "event_notification";
 146                 break;
 147         case MPI2_FUNCTION_FW_DOWNLOAD:
 148                 desc = "fw_download";
 149                 break;
 150         case MPI2_FUNCTION_FW_UPLOAD:
 151                 desc = "fw_upload";
 152                 break;
 153         case MPI2_FUNCTION_RAID_ACTION:
 154                 desc = "raid_action";
 155                 break;
 156         case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
 157         {
 158                 Mpi2SCSIIORequest_t *scsi_request =
 159                     (Mpi2SCSIIORequest_t *)mpi_request;
 160
 161                 snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
 162                     "raid_pass, cmd(0x%02x), cdb_len(%d)",
 163                     scsi_request->CDB.CDB32[0],
 164                     le16_to_cpu(scsi_request->IoFlags) & 0xF);
 165                 desc = ioc->tmp_string;
 166                 break;
 167         }
 168         case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
 169                 desc = "sas_iounit_cntl";
 170                 break;
 171         case MPI2_FUNCTION_SATA_PASSTHROUGH:
 172                 desc = "sata_pass";
 173                 break;
 174         case MPI2_FUNCTION_DIAG_BUFFER_POST:
 175                 desc = "diag_buffer_post";
 176                 break;
 177         case MPI2_FUNCTION_DIAG_RELEASE:
 178                 desc = "diag_release";
 179                 break;
 180         case MPI2_FUNCTION_SMP_PASSTHROUGH:
 181                 desc = "smp_passthrough";
 182                 break;
 183         case MPI2_FUNCTION_TOOLBOX:
 184                 desc = "toolbox";
 185                 break;
 186         case MPI2_FUNCTION_NVME_ENCAPSULATED:
 187                 desc = "nvme_encapsulated";
 188                 break;
 189         }
 190
 191         if (!desc)
 192                 return;
 193
 194         ioc_info(ioc, "%s: %s, smid(%d)\n", calling_function_name, desc, smid);
 195
 196         if (!mpi_reply)
 197                 return;
 198
 199         if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
 200                 ioc_info(ioc, "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
 201                          le16_to_cpu(mpi_reply->IOCStatus),
 202                          le32_to_cpu(mpi_reply->IOCLogInfo));
 203
 204         if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
 205             mpi_request->Function ==
 206             MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
 207                 Mpi2SCSIIOReply_t *scsi_reply =
 208                     (Mpi2SCSIIOReply_t *)mpi_reply;
 209                 struct _sas_device *sas_device = NULL;
 210                 struct _pcie_device *pcie_device = NULL;
 211
 212                 sas_device = mpt3sas_get_sdev_by_handle(ioc,
 213                     le16_to_cpu(scsi_reply->DevHandle));
 214                 if (sas_device) {
 215                         ioc_warn(ioc, "\tsas_address(0x%016llx), phy(%d)\n",
 216                                  (u64)sas_device->sas_address,
 217                                  sas_device->phy);
 218                         ioc_warn(ioc, "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
 219                                  (u64)sas_device->enclosure_logical_id,
 220                                  sas_device->slot);
 221                         sas_device_put(sas_device);
 222                 }
 223                 if (!sas_device) {
 224                         pcie_device = mpt3sas_get_pdev_by_handle(ioc,
 225                                 le16_to_cpu(scsi_reply->DevHandle));
 226                         if (pcie_device) {
 227                                 ioc_warn(ioc, "\tWWID(0x%016llx), port(%d)\n",
 228                                          (unsigned long long)pcie_device->wwid,
 229                                          pcie_device->port_num);
 230                                 if (pcie_device->enclosure_handle != 0)
 231                                         ioc_warn(ioc, "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
 232                                                  (u64)pcie_device->enclosure_logical_id,
 233                                                  pcie_device->slot);
 234                                 pcie_device_put(pcie_device);
 235                         }
 236                 }
 237                 if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
 238                         ioc_info(ioc, "\tscsi_state(0x%02x), scsi_status(0x%02x)\n",
 239                                  scsi_reply->SCSIState,
 240                                  scsi_reply->SCSIStatus);
 241         }
 242 }
 243
 244 /**
 245  * mpt3sas_ctl_done - ctl module completion routine
 246  * @ioc: per adapter object
 247  * @smid: system request message index
 248  * @msix_index: MSIX table index supplied by the OS
 249  * @reply: reply message frame(lower 32bit addr)
 250  * Context: none.
 251  *
 252  * The callback handler when using ioc->ctl_cb_idx.
 253  *
 254  * Return: 1 meaning mf should be freed from _base_interrupt
 255  *         0 means the mf is freed from this function.
 256  */
 257 u8
 258 mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 259         u32 reply)
 260 {
 261         MPI2DefaultReply_t *mpi_reply;
 262         Mpi2SCSIIOReply_t *scsiio_reply;
 263         Mpi26NVMeEncapsulatedErrorReply_t *nvme_error_reply;
 264         const void *sense_data;
 265         u32 sz;
 266
 267         if (ioc->ctl_cmds.status == MPT3_CMD_NOT_USED)
 268                 return 1;
 269         if (ioc->ctl_cmds.smid != smid)
 270                 return 1;
 271         ioc->ctl_cmds.status |= MPT3_CMD_COMPLETE;
 272         mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
 273         if (mpi_reply) {
 274                 memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
 275                 ioc->ctl_cmds.status |= MPT3_CMD_REPLY_VALID;
 276                 /* get sense data */
 277                 if (mpi_reply->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
 278                     mpi_reply->Function ==
 279                     MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
 280                         scsiio_reply = (Mpi2SCSIIOReply_t *)mpi_reply;
 281                         if (scsiio_reply->SCSIState &
 282                             MPI2_SCSI_STATE_AUTOSENSE_VALID) {
 283                                 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
 284                                     le32_to_cpu(scsiio_reply->SenseCount));
 285                                 sense_data = mpt3sas_base_get_sense_buffer(ioc,
 286                                     smid);
 287                                 memcpy(ioc->ctl_cmds.sense, sense_data, sz);
 288                         }
 289                 }
 290                 /*
 291                  * Get Error Response data for NVMe device. The ctl_cmds.sense
 292                  * buffer is used to store the Error Response data.
 293                  */
 294                 if (mpi_reply->Function == MPI2_FUNCTION_NVME_ENCAPSULATED) {
 295                         nvme_error_reply =
 296                             (Mpi26NVMeEncapsulatedErrorReply_t *)mpi_reply;
 297                         sz = min_t(u32, NVME_ERROR_RESPONSE_SIZE,
 298                             le16_to_cpu(nvme_error_reply->ErrorResponseCount));
 299                         sense_data = mpt3sas_base_get_sense_buffer(ioc, smid);
 300                         memcpy(ioc->ctl_cmds.sense, sense_data, sz);
 301                 }
 302         }
 303
 304         _ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
 305         ioc->ctl_cmds.status &= ~MPT3_CMD_PENDING;
 306         complete(&ioc->ctl_cmds.done);
 307         return 1;
 308 }
 309
 310 /**
 311  * _ctl_check_event_type - determines when an event needs logging
 312  * @ioc: per adapter object
 313  * @event: firmware event
 314  *
 315  * The bitmask in ioc->event_type[] indicates which events should be
 316  * be saved in the driver event_log.  This bitmask is set by application.
 317  *
 318  * Return: 1 when event should be captured, or zero means no match.
 319  */
 320 static int
 321 _ctl_check_event_type(struct MPT3SAS_ADAPTER *ioc, u16 event)
 322 {
 323         u16 i;
 324         u32 desired_event;
 325
 326         if (event >= 128 || !event || !ioc->event_log)
 327                 return 0;
 328
 329         desired_event = (1 << (event % 32));
 330         if (!desired_event)
 331                 desired_event = 1;
 332         i = event / 32;
 333         return desired_event & ioc->event_type[i];
 334 }
 335
 336 /**
 337  * mpt3sas_ctl_add_to_event_log - add event
 338  * @ioc: per adapter object
 339  * @mpi_reply: reply message frame
 340  */
 341 void
 342 mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc,
 343         Mpi2EventNotificationReply_t *mpi_reply)
 344 {
 345         struct MPT3_IOCTL_EVENTS *event_log;
 346         u16 event;
 347         int i;
 348         u32 sz, event_data_sz;
 349         u8 send_aen = 0;
 350
 351         if (!ioc->event_log)
 352                 return;
 353
 354         event = le16_to_cpu(mpi_reply->Event);
 355
 356         if (_ctl_check_event_type(ioc, event)) {
 357
 358                 /* insert entry into circular event_log */
 359                 i = ioc->event_context % MPT3SAS_CTL_EVENT_LOG_SIZE;
 360                 event_log = ioc->event_log;
 361                 event_log[i].event = event;
 362                 event_log[i].context = ioc->event_context++;
 363
 364                 event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4;
 365                 sz = min_t(u32, event_data_sz, MPT3_EVENT_DATA_SIZE);
 366                 memset(event_log[i].data, 0, MPT3_EVENT_DATA_SIZE);
 367                 memcpy(event_log[i].data, mpi_reply->EventData, sz);
 368                 send_aen = 1;
 369         }
 370
 371         /* This aen_event_read_flag flag is set until the
 372          * application has read the event log.
 373          * For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify.
 374          */
 375         if (event == MPI2_EVENT_LOG_ENTRY_ADDED ||
 376             (send_aen && !ioc->aen_event_read_flag)) {
 377                 ioc->aen_event_read_flag = 1;
 378                 wake_up_interruptible(&ctl_poll_wait);
 379                 if (async_queue)
 380                         kill_fasync(&async_queue, SIGIO, POLL_IN);
 381         }
 382 }
 383
 384 /**
 385  * mpt3sas_ctl_event_callback - firmware event handler (called at ISR time)
 386  * @ioc: per adapter object
 387  * @msix_index: MSIX table index supplied by the OS
 388  * @reply: reply message frame(lower 32bit addr)
 389  * Context: interrupt.
 390  *
 391  * This function merely adds a new work task into ioc->firmware_event_thread.
 392  * The tasks are worked from _firmware_event_work in user context.
 393  *
 394  * Return: 1 meaning mf should be freed from _base_interrupt
 395  *         0 means the mf is freed from this function.
 396  */
 397 u8
 398 mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
 399         u32 reply)
 400 {
 401         Mpi2EventNotificationReply_t *mpi_reply;
 402
 403         mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
 404         if (mpi_reply)
 405                 mpt3sas_ctl_add_to_event_log(ioc, mpi_reply);
 406         return 1;
 407 }
 408
 409 /**
 410  * _ctl_verify_adapter - validates ioc_number passed from application
 411  * @ioc_number: ?
 412  * @iocpp: The ioc pointer is returned in this.
 413  * @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
 414  * MPI25_VERSION | MPI26_VERSION for mpt3ctl ioctl device.
 415  *
 416  * Return: (-1) means error, else ioc_number.
 417  */
 418 static int
 419 _ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp,
 420                                                         int mpi_version)
 421 {
 422         struct MPT3SAS_ADAPTER *ioc;
 423         int version = 0;
 424         /* global ioc lock to protect controller on list operations */
 425         spin_lock(&gioc_lock);
 426         list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
 427                 if (ioc->id != ioc_number)
 428                         continue;
 429                 /* Check whether this ioctl command is from right
 430                  * ioctl device or not, if not continue the search.
 431                  */
 432                 version = ioc->hba_mpi_version_belonged;
 433                 /* MPI25_VERSION and MPI26_VERSION uses same ioctl
 434                  * device.
 435                  */
 436                 if (mpi_version == (MPI25_VERSION | MPI26_VERSION)) {
 437                         if ((version == MPI25_VERSION) ||
 438                                 (version == MPI26_VERSION))
 439                                 goto out;
 440                         else
 441                                 continue;
 442                 } else {
 443                         if (version != mpi_version)
 444                                 continue;
 445                 }
 446 out:
 447                 spin_unlock(&gioc_lock);
 448                 *iocpp = ioc;
 449                 return ioc_number;
 450         }
 451         spin_unlock(&gioc_lock);
 452         *iocpp = NULL;
 453         return -1;
 454 }
 455
 456 /**
 457  * mpt3sas_ctl_reset_handler - reset callback handler (for ctl)
 458  * @ioc: per adapter object
 459  *
 460  * The handler for doing any required cleanup or initialization.
 461  */
 462 void mpt3sas_ctl_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc)
 463 {
 464         int i;
 465         u8 issue_reset;
 466
 467         dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_PRE_RESET\n", __func__));
 468         for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
 469                 if (!(ioc->diag_buffer_status[i] &
 470                       MPT3_DIAG_BUFFER_IS_REGISTERED))
 471                         continue;
 472                 if ((ioc->diag_buffer_status[i] &
 473                      MPT3_DIAG_BUFFER_IS_RELEASED))
 474                         continue;
 475
 476                 /*
 477                  * add a log message to indicate the release
 478                  */
 479                 ioc_info(ioc,
 480                     "%s: Releasing the trace buffer due to adapter reset.",
 481                     __func__);
 482                 mpt3sas_send_diag_release(ioc, i, &issue_reset);
 483         }
 484 }
 485
 486 /**
 487  * mpt3sas_ctl_reset_handler - clears outstanding ioctl cmd.
 488  * @ioc: per adapter object
 489  *
 490  * The handler for doing any required cleanup or initialization.
 491  */
 492 void mpt3sas_ctl_clear_outstanding_ioctls(struct MPT3SAS_ADAPTER *ioc)
 493 {
 494         dtmprintk(ioc,
 495             ioc_info(ioc, "%s: clear outstanding ioctl cmd\n", __func__));
 496         if (ioc->ctl_cmds.status & MPT3_CMD_PENDING) {
 497                 ioc->ctl_cmds.status |= MPT3_CMD_RESET;
 498                 mpt3sas_base_free_smid(ioc, ioc->ctl_cmds.smid);
 499                 complete(&ioc->ctl_cmds.done);
 500         }
 501 }
 502
 503 /**
 504  * mpt3sas_ctl_reset_handler - reset callback handler (for ctl)
 505  * @ioc: per adapter object
 506  *
 507  * The handler for doing any required cleanup or initialization.
 508  */
 509 void mpt3sas_ctl_reset_done_handler(struct MPT3SAS_ADAPTER *ioc)
 510 {
 511         int i;
 512
 513         dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__));
 514
 515         for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
 516                 if (!(ioc->diag_buffer_status[i] &
 517                       MPT3_DIAG_BUFFER_IS_REGISTERED))
 518                         continue;
 519                 if ((ioc->diag_buffer_status[i] &
 520                      MPT3_DIAG_BUFFER_IS_RELEASED))
 521                         continue;
 522                 ioc->diag_buffer_status[i] |=
 523                         MPT3_DIAG_BUFFER_IS_DIAG_RESET;
 524         }
 525 }
 526
 527 /**
 528  * _ctl_fasync -
 529  * @fd: ?
 530  * @filep: ?
 531  * @mode: ?
 532  *
 533  * Called when application request fasyn callback handler.
 534  */
 535 static int
 536 _ctl_fasync(int fd, struct file *filep, int mode)
 537 {
 538         return fasync_helper(fd, filep, mode, &async_queue);
 539 }
 540
 541 /**
 542  * _ctl_poll -
 543  * @filep: ?
 544  * @wait: ?
 545  *
 546  */
 547 static __poll_t
 548 _ctl_poll(struct file *filep, poll_table *wait)
 549 {
 550         struct MPT3SAS_ADAPTER *ioc;
 551
 552         poll_wait(filep, &ctl_poll_wait, wait);
 553
 554         /* global ioc lock to protect controller on list operations */
 555         spin_lock(&gioc_lock);
 556         list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
 557                 if (ioc->aen_event_read_flag) {
 558                         spin_unlock(&gioc_lock);
 559                         return EPOLLIN | EPOLLRDNORM;
 560                 }
 561         }
 562         spin_unlock(&gioc_lock);
 563         return 0;
 564 }
 565
 566 /**
 567  * _ctl_set_task_mid - assign an active smid to tm request
 568  * @ioc: per adapter object
 569  * @karg: (struct mpt3_ioctl_command)
 570  * @tm_request: pointer to mf from user space
 571  *
 572  * Return: 0 when an smid if found, else fail.
 573  * during failure, the reply frame is filled.
 574  */
 575 static int
 576 _ctl_set_task_mid(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command *karg,
 577         Mpi2SCSITaskManagementRequest_t *tm_request)
 578 {
 579         u8 found = 0;
 580         u16 smid;
 581         u16 handle;
 582         struct scsi_cmnd *scmd;
 583         struct MPT3SAS_DEVICE *priv_data;
 584         Mpi2SCSITaskManagementReply_t *tm_reply;
 585         u32 sz;
 586         u32 lun;
 587         char *desc = NULL;
 588
 589         if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
 590                 desc = "abort_task";
 591         else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
 592                 desc = "query_task";
 593         else
 594                 return 0;
 595
 596         lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
 597
 598         handle = le16_to_cpu(tm_request->DevHandle);
 599         for (smid = ioc->scsiio_depth; smid && !found; smid--) {
 600                 struct scsiio_tracker *st;
 601
 602                 scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
 603                 if (!scmd)
 604                         continue;
 605                 if (lun != scmd->device->lun)
 606                         continue;
 607                 priv_data = scmd->device->hostdata;
 608                 if (priv_data->sas_target == NULL)
 609                         continue;
 610                 if (priv_data->sas_target->handle != handle)
 611                         continue;
 612                 st = scsi_cmd_priv(scmd);
 613
 614                 /*
 615                  * If the given TaskMID from the user space is zero, then the
 616                  * first outstanding smid will be picked up.  Otherwise,
 617                  * targeted smid will be the one.
 618                  */
 619                 if (!tm_request->TaskMID || tm_request->TaskMID == st->smid) {
 620                         tm_request->TaskMID = cpu_to_le16(st->smid);
 621                         found = 1;
 622                 }
 623         }
 624
 625         if (!found) {
 626                 dctlprintk(ioc,
 627                            ioc_info(ioc, "%s: handle(0x%04x), lun(%d), no active mid!!\n",
 628                                     desc, le16_to_cpu(tm_request->DevHandle),
 629                                     lun));
 630                 tm_reply = ioc->ctl_cmds.reply;
 631                 tm_reply->DevHandle = tm_request->DevHandle;
 632                 tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
 633                 tm_reply->TaskType = tm_request->TaskType;
 634                 tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
 635                 tm_reply->VP_ID = tm_request->VP_ID;
 636                 tm_reply->VF_ID = tm_request->VF_ID;
 637                 sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz);
 638                 if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply,
 639                     sz))
 640                         pr_err("failure at %s:%d/%s()!\n", __FILE__,
 641                             __LINE__, __func__);
 642                 return 1;
 643         }
 644
 645         dctlprintk(ioc,
 646                    ioc_info(ioc, "%s: handle(0x%04x), lun(%d), task_mid(%d)\n",
 647                             desc, le16_to_cpu(tm_request->DevHandle), lun,
 648                             le16_to_cpu(tm_request->TaskMID)));
 649         return 0;
 650 }
 651
 652 /**
 653  * _ctl_do_mpt_command - main handler for MPT3COMMAND opcode
 654  * @ioc: per adapter object
 655  * @karg: (struct mpt3_ioctl_command)
 656  * @mf: pointer to mf in user space
 657  */
 658 static long
 659 _ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
 660         void __user *mf)
 661 {
 662         MPI2RequestHeader_t *mpi_request = NULL, *request;
 663         MPI2DefaultReply_t *mpi_reply;
 664         Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request = NULL;
 665         struct _pcie_device *pcie_device = NULL;
 666         u16 smid;
 667         u8 timeout;
 668         u8 issue_reset;
 669         u32 sz, sz_arg;
 670         void *psge;
 671         void *data_out = NULL;
 672         dma_addr_t data_out_dma = 0;
 673         size_t data_out_sz = 0;
 674         void *data_in = NULL;
 675         dma_addr_t data_in_dma = 0;
 676         size_t data_in_sz = 0;
 677         long ret;
 678         u16 device_handle = MPT3SAS_INVALID_DEVICE_HANDLE;
 679
 680         issue_reset = 0;
 681
 682         if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
 683                 ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
 684                 ret = -EAGAIN;
 685                 goto out;
 686         }
 687
 688         ret = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT);
 689         if (ret)
 690                 goto out;
 691
 692         mpi_request = kzalloc(ioc->request_sz, GFP_KERNEL);
 693         if (!mpi_request) {
 694                 ioc_err(ioc, "%s: failed obtaining a memory for mpi_request\n",
 695                         __func__);
 696                 ret = -ENOMEM;
 697                 goto out;
 698         }
 699
 700         /* Check for overflow and wraparound */
 701         if (karg.data_sge_offset * 4 > ioc->request_sz ||
 702             karg.data_sge_offset > (UINT_MAX / 4)) {
 703                 ret = -EINVAL;
 704                 goto out;
 705         }
 706
 707         /* copy in request message frame from user */
 708         if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) {
 709                 pr_err("failure at %s:%d/%s()!\n", __FILE__, __LINE__,
 710                     __func__);
 711                 ret = -EFAULT;
 712                 goto out;
 713         }
 714
 715         if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
 716                 smid = mpt3sas_base_get_smid_hpr(ioc, ioc->ctl_cb_idx);
 717                 if (!smid) {
 718                         ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
 719                         ret = -EAGAIN;
 720                         goto out;
 721                 }
 722         } else {
 723                 /* Use first reserved smid for passthrough ioctls */
 724                 smid = ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT + 1;
 725         }
 726
 727         ret = 0;
 728         ioc->ctl_cmds.status = MPT3_CMD_PENDING;
 729         memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
 730         request = mpt3sas_base_get_msg_frame(ioc, smid);
 731         memset(request, 0, ioc->request_sz);
 732         memcpy(request, mpi_request, karg.data_sge_offset*4);
 733         ioc->ctl_cmds.smid = smid;
 734         data_out_sz = karg.data_out_size;
 735         data_in_sz = karg.data_in_size;
 736
 737         if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
 738             mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
 739             mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT ||
 740             mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH ||
 741             mpi_request->Function == MPI2_FUNCTION_NVME_ENCAPSULATED) {
 742
 743                 device_handle = le16_to_cpu(mpi_request->FunctionDependent1);
 744                 if (!device_handle || (device_handle >
 745                     ioc->facts.MaxDevHandle)) {
 746                         ret = -EINVAL;
 747                         mpt3sas_base_free_smid(ioc, smid);
 748                         goto out;
 749                 }
 750         }
 751
 752         /* obtain dma-able memory for data transfer */
 753         if (data_out_sz) /* WRITE */ {
 754                 data_out = dma_alloc_coherent(&ioc->pdev->dev, data_out_sz,
 755                                 &data_out_dma, GFP_KERNEL);
 756                 if (!data_out) {
 757                         pr_err("failure at %s:%d/%s()!\n", __FILE__,
 758                             __LINE__, __func__);
 759                         ret = -ENOMEM;
 760                         mpt3sas_base_free_smid(ioc, smid);
 761                         goto out;
 762                 }
 763                 if (copy_from_user(data_out, karg.data_out_buf_ptr,
 764                         data_out_sz)) {
 765                         pr_err("failure at %s:%d/%s()!\n", __FILE__,
 766                             __LINE__, __func__);
 767                         ret =  -EFAULT;
 768                         mpt3sas_base_free_smid(ioc, smid);
 769                         goto out;
 770                 }
 771         }
 772
 773         if (data_in_sz) /* READ */ {
 774                 data_in = dma_alloc_coherent(&ioc->pdev->dev, data_in_sz,
 775                                 &data_in_dma, GFP_KERNEL);
 776                 if (!data_in) {
 777                         pr_err("failure at %s:%d/%s()!\n", __FILE__,
 778                             __LINE__, __func__);
 779                         ret = -ENOMEM;
 780                         mpt3sas_base_free_smid(ioc, smid);
 781                         goto out;
 782                 }
 783         }
 784
 785         psge = (void *)request + (karg.data_sge_offset*4);
 786
 787         /* send command to firmware */
 788         _ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
 789
 790         init_completion(&ioc->ctl_cmds.done);
 791         switch (mpi_request->Function) {
 792         case MPI2_FUNCTION_NVME_ENCAPSULATED:
 793         {
 794                 nvme_encap_request = (Mpi26NVMeEncapsulatedRequest_t *)request;
 795                 if (!ioc->pcie_sg_lookup) {
 796                         dtmprintk(ioc, ioc_info(ioc,
 797                             "HBA doesn't support NVMe. Rejecting NVMe Encapsulated request.\n"
 798                             ));
 799
 800                         if (ioc->logging_level & MPT_DEBUG_TM)
 801                                 _debug_dump_mf(nvme_encap_request,
 802                                     ioc->request_sz/4);
 803                         mpt3sas_base_free_smid(ioc, smid);
 804                         ret = -EINVAL;
 805                         goto out;
 806                 }
 807                 /*
 808                  * Get the Physical Address of the sense buffer.
 809                  * Use Error Response buffer address field to hold the sense
 810                  * buffer address.
 811                  * Clear the internal sense buffer, which will potentially hold
 812                  * the Completion Queue Entry on return, or 0 if no Entry.
 813                  * Build the PRPs and set direction bits.
 814                  * Send the request.
 815                  */
 816                 nvme_encap_request->ErrorResponseBaseAddress =
 817                     cpu_to_le64(ioc->sense_dma & 0xFFFFFFFF00000000UL);
 818                 nvme_encap_request->ErrorResponseBaseAddress |=
 819                    cpu_to_le64(le32_to_cpu(
 820                    mpt3sas_base_get_sense_buffer_dma(ioc, smid)));
 821                 nvme_encap_request->ErrorResponseAllocationLength =
 822                                         cpu_to_le16(NVME_ERROR_RESPONSE_SIZE);
 823                 memset(ioc->ctl_cmds.sense, 0, NVME_ERROR_RESPONSE_SIZE);
 824                 ioc->build_nvme_prp(ioc, smid, nvme_encap_request,
 825                     data_out_dma, data_out_sz, data_in_dma, data_in_sz);
 826                 if (test_bit(device_handle, ioc->device_remove_in_progress)) {
 827                         dtmprintk(ioc,
 828                                   ioc_info(ioc, "handle(0x%04x): ioctl failed due to device removal in progress\n",
 829                                            device_handle));
 830                         mpt3sas_base_free_smid(ioc, smid);
 831                         ret = -EINVAL;
 832                         goto out;
 833                 }
 834                 mpt3sas_base_put_smid_nvme_encap(ioc, smid);
 835                 break;
 836         }
 837         case MPI2_FUNCTION_SCSI_IO_REQUEST:
 838         case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
 839         {
 840                 Mpi2SCSIIORequest_t *scsiio_request =
 841                     (Mpi2SCSIIORequest_t *)request;
 842                 scsiio_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
 843                 scsiio_request->SenseBufferLowAddress =
 844                     mpt3sas_base_get_sense_buffer_dma(ioc, smid);
 845                 memset(ioc->ctl_cmds.sense, 0, SCSI_SENSE_BUFFERSIZE);
 846                 if (test_bit(device_handle, ioc->device_remove_in_progress)) {
 847                         dtmprintk(ioc,
 848                                   ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
 849                                            device_handle));
 850                         mpt3sas_base_free_smid(ioc, smid);
 851                         ret = -EINVAL;
 852                         goto out;
 853                 }
 854                 ioc->build_sg(ioc, psge, data_out_dma, data_out_sz,
 855                     data_in_dma, data_in_sz);
 856                 if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)
 857                         ioc->put_smid_scsi_io(ioc, smid, device_handle);
 858                 else
 859                         ioc->put_smid_default(ioc, smid);
 860                 break;
 861         }
 862         case MPI2_FUNCTION_SCSI_TASK_MGMT:
 863         {
 864                 Mpi2SCSITaskManagementRequest_t *tm_request =
 865                     (Mpi2SCSITaskManagementRequest_t *)request;
 866
 867                 dtmprintk(ioc,
 868                           ioc_info(ioc, "TASK_MGMT: handle(0x%04x), task_type(0x%02x)\n",
 869                                    le16_to_cpu(tm_request->DevHandle),
 870                                    tm_request->TaskType));
 871                 ioc->got_task_abort_from_ioctl = 1;
 872                 if (tm_request->TaskType ==
 873                     MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
 874                     tm_request->TaskType ==
 875                     MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
 876                         if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
 877                                 mpt3sas_base_free_smid(ioc, smid);
 878                                 ioc->got_task_abort_from_ioctl = 0;
 879                                 goto out;
 880                         }
 881                 }
 882                 ioc->got_task_abort_from_ioctl = 0;
 883
 884                 if (test_bit(device_handle, ioc->device_remove_in_progress)) {
 885                         dtmprintk(ioc,
 886                                   ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
 887                                            device_handle));
 888                         mpt3sas_base_free_smid(ioc, smid);
 889                         ret = -EINVAL;
 890                         goto out;
 891                 }
 892                 mpt3sas_scsih_set_tm_flag(ioc, le16_to_cpu(
 893                     tm_request->DevHandle));
 894                 ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
 895                     data_in_dma, data_in_sz);
 896                 ioc->put_smid_hi_priority(ioc, smid, 0);
 897                 break;
 898         }
 899         case MPI2_FUNCTION_SMP_PASSTHROUGH:
 900         {
 901                 Mpi2SmpPassthroughRequest_t *smp_request =
 902                     (Mpi2SmpPassthroughRequest_t *)mpi_request;
 903                 u8 *data;
 904
 905                 /* ioc determines which port to use */
 906                 smp_request->PhysicalPort = 0xFF;
 907                 if (smp_request->PassthroughFlags &
 908                     MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE)
 909                         data = (u8 *)&smp_request->SGL;
 910                 else {
 911                         if (unlikely(data_out == NULL)) {
 912                                 pr_err("failure at %s:%d/%s()!\n",
 913                                     __FILE__, __LINE__, __func__);
 914                                 mpt3sas_base_free_smid(ioc, smid);
 915                                 ret = -EINVAL;
 916                                 goto out;
 917                         }
 918                         data = data_out;
 919                 }
 920
 921                 if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) {
 922                         ioc->ioc_link_reset_in_progress = 1;
 923                         ioc->ignore_loginfos = 1;
 924                 }
 925                 ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
 926                     data_in_sz);
 927                 ioc->put_smid_default(ioc, smid);
 928                 break;
 929         }
 930         case MPI2_FUNCTION_SATA_PASSTHROUGH:
 931         {
 932                 if (test_bit(device_handle, ioc->device_remove_in_progress)) {
 933                         dtmprintk(ioc,
 934                                   ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
 935                                            device_handle));
 936                         mpt3sas_base_free_smid(ioc, smid);
 937                         ret = -EINVAL;
 938                         goto out;
 939                 }
 940                 ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
 941                     data_in_sz);
 942                 ioc->put_smid_default(ioc, smid);
 943                 break;
 944         }
 945         case MPI2_FUNCTION_FW_DOWNLOAD:
 946         case MPI2_FUNCTION_FW_UPLOAD:
 947         {
 948                 ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
 949                     data_in_sz);
 950                 ioc->put_smid_default(ioc, smid);
 951                 break;
 952         }
 953         case MPI2_FUNCTION_TOOLBOX:
 954         {
 955                 Mpi2ToolboxCleanRequest_t *toolbox_request =
 956                         (Mpi2ToolboxCleanRequest_t *)mpi_request;
 957
 958                 if ((toolbox_request->Tool == MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL)
 959                     || (toolbox_request->Tool ==
 960                     MPI26_TOOLBOX_BACKEND_PCIE_LANE_MARGIN))
 961                         ioc->build_sg(ioc, psge, data_out_dma, data_out_sz,
 962                                 data_in_dma, data_in_sz);
 963                 else if (toolbox_request->Tool ==
 964                                 MPI2_TOOLBOX_MEMORY_MOVE_TOOL) {
 965                         Mpi2ToolboxMemMoveRequest_t *mem_move_request =
 966                                         (Mpi2ToolboxMemMoveRequest_t *)request;
 967                         Mpi2SGESimple64_t tmp, *src = NULL, *dst = NULL;
 968
 969                         ioc->build_sg_mpi(ioc, psge, data_out_dma,
 970                                         data_out_sz, data_in_dma, data_in_sz);
 971                         if (data_out_sz && !data_in_sz) {
 972                                 dst =
 973                                     (Mpi2SGESimple64_t *)&mem_move_request->SGL;
 974                                 src = (void *)dst + ioc->sge_size;
 975
 976                                 memcpy(&tmp, src, ioc->sge_size);
 977                                 memcpy(src, dst, ioc->sge_size);
 978                                 memcpy(dst, &tmp, ioc->sge_size);
 979                         }
 980                         if (ioc->logging_level & MPT_DEBUG_TM) {
 981                                 ioc_info(ioc,
 982                                   "Mpi2ToolboxMemMoveRequest_t request msg\n");
 983                                 _debug_dump_mf(mem_move_request,
 984                                                         ioc->request_sz/4);
 985                         }
 986                 } else
 987                         ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
 988                             data_in_dma, data_in_sz);
 989                 ioc->put_smid_default(ioc, smid);
 990                 break;
 991         }
 992         case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
 993         {
 994                 Mpi2SasIoUnitControlRequest_t *sasiounit_request =
 995                     (Mpi2SasIoUnitControlRequest_t *)mpi_request;
 996
 997                 if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET
 998                     || sasiounit_request->Operation ==
 999                     MPI2_SAS_OP_PHY_LINK_RESET) {
1000                         ioc->ioc_link_reset_in_progress = 1;
1001                         ioc->ignore_loginfos = 1;
1002                 }
1003                 /* drop to default case for posting the request */
1004         }
1005                 /* fall through */
1006         default:
1007                 ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
1008                     data_in_dma, data_in_sz);
1009                 ioc->put_smid_default(ioc, smid);
1010                 break;
1011         }
1012
1013         if (karg.timeout < MPT3_IOCTL_DEFAULT_TIMEOUT)
1014                 timeout = MPT3_IOCTL_DEFAULT_TIMEOUT;
1015         else
1016                 timeout = karg.timeout;
1017         wait_for_completion_timeout(&ioc->ctl_cmds.done, timeout*HZ);
1018         if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
1019                 Mpi2SCSITaskManagementRequest_t *tm_request =
1020                     (Mpi2SCSITaskManagementRequest_t *)mpi_request;
1021                 mpt3sas_scsih_clear_tm_flag(ioc, le16_to_cpu(
1022                     tm_request->DevHandle));
1023                 mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
1024         } else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH ||
1025             mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) &&
1026                 ioc->ioc_link_reset_in_progress) {
1027                 ioc->ioc_link_reset_in_progress = 0;
1028                 ioc->ignore_loginfos = 0;
1029         }
1030         if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
1031                 mpt3sas_check_cmd_timeout(ioc,
1032                     ioc->ctl_cmds.status, mpi_request,
1033                     karg.data_sge_offset, issue_reset);
1034                 goto issue_host_reset;
1035         }
1036
1037         mpi_reply = ioc->ctl_cmds.reply;
1038
1039         if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
1040             (ioc->logging_level & MPT_DEBUG_TM)) {
1041                 Mpi2SCSITaskManagementReply_t *tm_reply =
1042                     (Mpi2SCSITaskManagementReply_t *)mpi_reply;
1043
1044                 ioc_info(ioc, "TASK_MGMT: IOCStatus(0x%04x), IOCLogInfo(0x%08x), TerminationCount(0x%08x)\n",
1045                          le16_to_cpu(tm_reply->IOCStatus),
1046                          le32_to_cpu(tm_reply->IOCLogInfo),
1047                          le32_to_cpu(tm_reply->TerminationCount));
1048         }
1049
1050         /* copy out xdata to user */
1051         if (data_in_sz) {
1052                 if (copy_to_user(karg.data_in_buf_ptr, data_in,
1053                     data_in_sz)) {
1054                         pr_err("failure at %s:%d/%s()!\n", __FILE__,
1055                             __LINE__, __func__);
1056                         ret = -ENODATA;
1057                         goto out;
1058                 }
1059         }
1060
1061         /* copy out reply message frame to user */
1062         if (karg.max_reply_bytes) {
1063                 sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz);
1064                 if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply,
1065                     sz)) {
1066                         pr_err("failure at %s:%d/%s()!\n", __FILE__,
1067                             __LINE__, __func__);
1068                         ret = -ENODATA;
1069                         goto out;
1070                 }
1071         }
1072
1073         /* copy out sense/NVMe Error Response to user */
1074         if (karg.max_sense_bytes && (mpi_request->Function ==
1075             MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function ==
1076             MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || mpi_request->Function ==
1077             MPI2_FUNCTION_NVME_ENCAPSULATED)) {
1078                 if (karg.sense_data_ptr == NULL) {
1079                         ioc_info(ioc, "Response buffer provided by application is NULL; Response data will not be returned\n");
1080                         goto out;
1081                 }
1082                 sz_arg = (mpi_request->Function ==
1083                 MPI2_FUNCTION_NVME_ENCAPSULATED) ? NVME_ERROR_RESPONSE_SIZE :
1084                                                         SCSI_SENSE_BUFFERSIZE;
1085                 sz = min_t(u32, karg.max_sense_bytes, sz_arg);
1086                 if (copy_to_user(karg.sense_data_ptr, ioc->ctl_cmds.sense,
1087                     sz)) {
1088                         pr_err("failure at %s:%d/%s()!\n", __FILE__,
1089                                 __LINE__, __func__);
1090                         ret = -ENODATA;
1091                         goto out;
1092                 }
1093         }
1094
1095  issue_host_reset:
1096         if (issue_reset) {
1097                 ret = -ENODATA;
1098                 if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
1099                     mpi_request->Function ==
1100                     MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
1101                     mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH)) {
1102                         ioc_info(ioc, "issue target reset: handle = (0x%04x)\n",
1103                                  le16_to_cpu(mpi_request->FunctionDependent1));
1104                         mpt3sas_halt_firmware(ioc);
1105                         pcie_device = mpt3sas_get_pdev_by_handle(ioc,
1106                                 le16_to_cpu(mpi_request->FunctionDependent1));
1107                         if (pcie_device && (!ioc->tm_custom_handling) &&
1108                             (!(mpt3sas_scsih_is_pcie_scsi_device(
1109                             pcie_device->device_info))))
1110                                 mpt3sas_scsih_issue_locked_tm(ioc,
1111                                   le16_to_cpu(mpi_request->FunctionDependent1),
1112                                   0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
1113                                   0, pcie_device->reset_timeout,
1114                         MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE);
1115                         else
1116                                 mpt3sas_scsih_issue_locked_tm(ioc,
1117                                   le16_to_cpu(mpi_request->FunctionDependent1),
1118                                   0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
1119                                   0, 30, MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET);
1120                 } else
1121                         mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
1122         }
1123
1124  out:
1125         if (pcie_device)
1126                 pcie_device_put(pcie_device);
1127
1128         /* free memory associated with sg buffers */
1129         if (data_in)
1130                 dma_free_coherent(&ioc->pdev->dev, data_in_sz, data_in,
1131                     data_in_dma);
1132
1133         if (data_out)
1134                 dma_free_coherent(&ioc->pdev->dev, data_out_sz, data_out,
1135                     data_out_dma);
1136
1137         kfree(mpi_request);
1138         ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
1139         return ret;
1140 }
1141
1142 /**
1143  * _ctl_getiocinfo - main handler for MPT3IOCINFO opcode
1144  * @ioc: per adapter object
1145  * @arg: user space buffer containing ioctl content
1146  */
1147 static long
1148 _ctl_getiocinfo(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1149 {
1150         struct mpt3_ioctl_iocinfo karg;
1151
1152         dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
1153                                  __func__));
1154
1155         memset(&karg, 0 , sizeof(karg));
1156         if (ioc->pfacts)
1157                 karg.port_number = ioc->pfacts[0].PortNumber;
1158         karg.hw_rev = ioc->pdev->revision;
1159         karg.pci_id = ioc->pdev->device;
1160         karg.subsystem_device = ioc->pdev->subsystem_device;
1161         karg.subsystem_vendor = ioc->pdev->subsystem_vendor;
1162         karg.pci_information.u.bits.bus = ioc->pdev->bus->number;
1163         karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn);
1164         karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
1165         karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
1166         karg.firmware_version = ioc->facts.FWVersion.Word;
1167         strcpy(karg.driver_version, ioc->driver_name);
1168         strcat(karg.driver_version, "-");
1169         switch  (ioc->hba_mpi_version_belonged) {
1170         case MPI2_VERSION:
1171                 if (ioc->is_warpdrive)
1172                         karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200;
1173                 else
1174                         karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
1175                 strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
1176                 break;
1177         case MPI25_VERSION:
1178         case MPI26_VERSION:
1179                 if (ioc->is_gen35_ioc)
1180                         karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS35;
1181                 else
1182                         karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS3;
1183                 strcat(karg.driver_version, MPT3SAS_DRIVER_VERSION);
1184                 break;
1185         }
1186         karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
1187
1188         if (copy_to_user(arg, &karg, sizeof(karg))) {
1189                 pr_err("failure at %s:%d/%s()!\n",
1190                     __FILE__, __LINE__, __func__);
1191                 return -EFAULT;
1192         }
1193         return 0;
1194 }
1195
1196 /**
1197  * _ctl_eventquery - main handler for MPT3EVENTQUERY opcode
1198  * @ioc: per adapter object
1199  * @arg: user space buffer containing ioctl content
1200  */
1201 static long
1202 _ctl_eventquery(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1203 {
1204         struct mpt3_ioctl_eventquery karg;
1205
1206         if (copy_from_user(&karg, arg, sizeof(karg))) {
1207                 pr_err("failure at %s:%d/%s()!\n",
1208                     __FILE__, __LINE__, __func__);
1209                 return -EFAULT;
1210         }
1211
1212         dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
1213                                  __func__));
1214
1215         karg.event_entries = MPT3SAS_CTL_EVENT_LOG_SIZE;
1216         memcpy(karg.event_types, ioc->event_type,
1217             MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
1218
1219         if (copy_to_user(arg, &karg, sizeof(karg))) {
1220                 pr_err("failure at %s:%d/%s()!\n",
1221                     __FILE__, __LINE__, __func__);
1222                 return -EFAULT;
1223         }
1224         return 0;
1225 }
1226
1227 /**
1228  * _ctl_eventenable - main handler for MPT3EVENTENABLE opcode
1229  * @ioc: per adapter object
1230  * @arg: user space buffer containing ioctl content
1231  */
1232 static long
1233 _ctl_eventenable(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1234 {
1235         struct mpt3_ioctl_eventenable karg;
1236
1237         if (copy_from_user(&karg, arg, sizeof(karg))) {
1238                 pr_err("failure at %s:%d/%s()!\n",
1239                     __FILE__, __LINE__, __func__);
1240                 return -EFAULT;
1241         }
1242
1243         dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
1244                                  __func__));
1245
1246         memcpy(ioc->event_type, karg.event_types,
1247             MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
1248         mpt3sas_base_validate_event_type(ioc, ioc->event_type);
1249
1250         if (ioc->event_log)
1251                 return 0;
1252         /* initialize event_log */
1253         ioc->event_context = 0;
1254         ioc->aen_event_read_flag = 0;
1255         ioc->event_log = kcalloc(MPT3SAS_CTL_EVENT_LOG_SIZE,
1256             sizeof(struct MPT3_IOCTL_EVENTS), GFP_KERNEL);
1257         if (!ioc->event_log) {
1258                 pr_err("failure at %s:%d/%s()!\n",
1259                     __FILE__, __LINE__, __func__);
1260                 return -ENOMEM;
1261         }
1262         return 0;
1263 }
1264
1265 /**
1266  * _ctl_eventreport - main handler for MPT3EVENTREPORT opcode
1267  * @ioc: per adapter object
1268  * @arg: user space buffer containing ioctl content
1269  */
1270 static long
1271 _ctl_eventreport(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1272 {
1273         struct mpt3_ioctl_eventreport karg;
1274         u32 number_bytes, max_events, max;
1275         struct mpt3_ioctl_eventreport __user *uarg = arg;
1276
1277         if (copy_from_user(&karg, arg, sizeof(karg))) {
1278                 pr_err("failure at %s:%d/%s()!\n",
1279                     __FILE__, __LINE__, __func__);
1280                 return -EFAULT;
1281         }
1282
1283         dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
1284                                  __func__));
1285
1286         number_bytes = karg.hdr.max_data_size -
1287             sizeof(struct mpt3_ioctl_header);
1288         max_events = number_bytes/sizeof(struct MPT3_IOCTL_EVENTS);
1289         max = min_t(u32, MPT3SAS_CTL_EVENT_LOG_SIZE, max_events);
1290
1291         /* If fewer than 1 event is requested, there must have
1292          * been some type of error.
1293          */
1294         if (!max || !ioc->event_log)
1295                 return -ENODATA;
1296
1297         number_bytes = max * sizeof(struct MPT3_IOCTL_EVENTS);
1298         if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) {
1299                 pr_err("failure at %s:%d/%s()!\n",
1300                     __FILE__, __LINE__, __func__);
1301                 return -EFAULT;
1302         }
1303
1304         /* reset flag so SIGIO can restart */
1305         ioc->aen_event_read_flag = 0;
1306         return 0;
1307 }
1308
1309 /**
1310  * _ctl_do_reset - main handler for MPT3HARDRESET opcode
1311  * @ioc: per adapter object
1312  * @arg: user space buffer containing ioctl content
1313  */
1314 static long
1315 _ctl_do_reset(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1316 {
1317         struct mpt3_ioctl_diag_reset karg;
1318         int retval;
1319
1320         if (copy_from_user(&karg, arg, sizeof(karg))) {
1321                 pr_err("failure at %s:%d/%s()!\n",
1322                     __FILE__, __LINE__, __func__);
1323                 return -EFAULT;
1324         }
1325
1326         if (ioc->shost_recovery || ioc->pci_error_recovery ||
1327             ioc->is_driver_loading)
1328                 return -EAGAIN;
1329
1330         dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
1331                                  __func__));
1332
1333         retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
1334         ioc_info(ioc,
1335             "Ioctl: host reset: %s\n", ((!retval) ? "SUCCESS" : "FAILED"));
1336         return 0;
1337 }
1338
1339 /**
1340  * _ctl_btdh_search_sas_device - searching for sas device
1341  * @ioc: per adapter object
1342  * @btdh: btdh ioctl payload
1343  */
1344 static int
1345 _ctl_btdh_search_sas_device(struct MPT3SAS_ADAPTER *ioc,
1346         struct mpt3_ioctl_btdh_mapping *btdh)
1347 {
1348         struct _sas_device *sas_device;
1349         unsigned long flags;
1350         int rc = 0;
1351
1352         if (list_empty(&ioc->sas_device_list))
1353                 return rc;
1354
1355         spin_lock_irqsave(&ioc->sas_device_lock, flags);
1356         list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
1357                 if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
1358                     btdh->handle == sas_device->handle) {
1359                         btdh->bus = sas_device->channel;
1360                         btdh->id = sas_device->id;
1361                         rc = 1;
1362                         goto out;
1363                 } else if (btdh->bus == sas_device->channel && btdh->id ==
1364                     sas_device->id && btdh->handle == 0xFFFF) {
1365                         btdh->handle = sas_device->handle;
1366                         rc = 1;
1367                         goto out;
1368                 }
1369         }
1370  out:
1371         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1372         return rc;
1373 }
1374
1375 /**
1376  * _ctl_btdh_search_pcie_device - searching for pcie device
1377  * @ioc: per adapter object
1378  * @btdh: btdh ioctl payload
1379  */
1380 static int
1381 _ctl_btdh_search_pcie_device(struct MPT3SAS_ADAPTER *ioc,
1382         struct mpt3_ioctl_btdh_mapping *btdh)
1383 {
1384         struct _pcie_device *pcie_device;
1385         unsigned long flags;
1386         int rc = 0;
1387
1388         if (list_empty(&ioc->pcie_device_list))
1389                 return rc;
1390
1391         spin_lock_irqsave(&ioc->pcie_device_lock, flags);
1392         list_for_each_entry(pcie_device, &ioc->pcie_device_list, list) {
1393                 if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
1394                            btdh->handle == pcie_device->handle) {
1395                         btdh->bus = pcie_device->channel;
1396                         btdh->id = pcie_device->id;
1397                         rc = 1;
1398                         goto out;
1399                 } else if (btdh->bus == pcie_device->channel && btdh->id ==
1400                            pcie_device->id && btdh->handle == 0xFFFF) {
1401                         btdh->handle = pcie_device->handle;
1402                         rc = 1;
1403                         goto out;
1404                 }
1405         }
1406  out:
1407         spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
1408         return rc;
1409 }
1410
1411 /**
1412  * _ctl_btdh_search_raid_device - searching for raid device
1413  * @ioc: per adapter object
1414  * @btdh: btdh ioctl payload
1415  */
1416 static int
1417 _ctl_btdh_search_raid_device(struct MPT3SAS_ADAPTER *ioc,
1418         struct mpt3_ioctl_btdh_mapping *btdh)
1419 {
1420         struct _raid_device *raid_device;
1421         unsigned long flags;
1422         int rc = 0;
1423
1424         if (list_empty(&ioc->raid_device_list))
1425                 return rc;
1426
1427         spin_lock_irqsave(&ioc->raid_device_lock, flags);
1428         list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
1429                 if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
1430                     btdh->handle == raid_device->handle) {
1431                         btdh->bus = raid_device->channel;
1432                         btdh->id = raid_device->id;
1433                         rc = 1;
1434                         goto out;
1435                 } else if (btdh->bus == raid_device->channel && btdh->id ==
1436                     raid_device->id && btdh->handle == 0xFFFF) {
1437                         btdh->handle = raid_device->handle;
1438                         rc = 1;
1439                         goto out;
1440                 }
1441         }
1442  out:
1443         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1444         return rc;
1445 }
1446
1447 /**
1448  * _ctl_btdh_mapping - main handler for MPT3BTDHMAPPING opcode
1449  * @ioc: per adapter object
1450  * @arg: user space buffer containing ioctl content
1451  */
1452 static long
1453 _ctl_btdh_mapping(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1454 {
1455         struct mpt3_ioctl_btdh_mapping karg;
1456         int rc;
1457
1458         if (copy_from_user(&karg, arg, sizeof(karg))) {
1459                 pr_err("failure at %s:%d/%s()!\n",
1460                     __FILE__, __LINE__, __func__);
1461                 return -EFAULT;
1462         }
1463
1464         dctlprintk(ioc, ioc_info(ioc, "%s\n",
1465                                  __func__));
1466
1467         rc = _ctl_btdh_search_sas_device(ioc, &karg);
1468         if (!rc)
1469                 rc = _ctl_btdh_search_pcie_device(ioc, &karg);
1470         if (!rc)
1471                 _ctl_btdh_search_raid_device(ioc, &karg);
1472
1473         if (copy_to_user(arg, &karg, sizeof(karg))) {
1474                 pr_err("failure at %s:%d/%s()!\n",
1475                     __FILE__, __LINE__, __func__);
1476                 return -EFAULT;
1477         }
1478         return 0;
1479 }
1480
1481 /**
1482  * _ctl_diag_capability - return diag buffer capability
1483  * @ioc: per adapter object
1484  * @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
1485  *
1486  * returns 1 when diag buffer support is enabled in firmware
1487  */
1488 static u8
1489 _ctl_diag_capability(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type)
1490 {
1491         u8 rc = 0;
1492
1493         switch (buffer_type) {
1494         case MPI2_DIAG_BUF_TYPE_TRACE:
1495                 if (ioc->facts.IOCCapabilities &
1496                     MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER)
1497                         rc = 1;
1498                 break;
1499         case MPI2_DIAG_BUF_TYPE_SNAPSHOT:
1500                 if (ioc->facts.IOCCapabilities &
1501                     MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER)
1502                         rc = 1;
1503                 break;
1504         case MPI2_DIAG_BUF_TYPE_EXTENDED:
1505                 if (ioc->facts.IOCCapabilities &
1506                     MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER)
1507                         rc = 1;
1508         }
1509
1510         return rc;
1511 }
1512
1513 /**
1514  * _ctl_diag_get_bufftype - return diag buffer type
1515  *              either TRACE, SNAPSHOT, or EXTENDED
1516  * @ioc: per adapter object
1517  * @unique_id: specifies the unique_id for the buffer
1518  *
1519  * returns MPT3_DIAG_UID_NOT_FOUND if the id not found
1520  */
1521 static u8
1522 _ctl_diag_get_bufftype(struct MPT3SAS_ADAPTER *ioc, u32 unique_id)
1523 {
1524         u8  index;
1525
1526         for (index = 0; index < MPI2_DIAG_BUF_TYPE_COUNT; index++) {
1527                 if (ioc->unique_id[index] == unique_id)
1528                         return index;
1529         }
1530
1531         return MPT3_DIAG_UID_NOT_FOUND;
1532 }
1533
1534 /**
1535  * _ctl_diag_register_2 - wrapper for registering diag buffer support
1536  * @ioc: per adapter object
1537  * @diag_register: the diag_register struct passed in from user space
1538  *
1539  */
1540 static long
1541 _ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
1542         struct mpt3_diag_register *diag_register)
1543 {
1544         int rc, i;
1545         void *request_data = NULL;
1546         dma_addr_t request_data_dma;
1547         u32 request_data_sz = 0;
1548         Mpi2DiagBufferPostRequest_t *mpi_request;
1549         Mpi2DiagBufferPostReply_t *mpi_reply;
1550         u8 buffer_type;
1551         u16 smid;
1552         u16 ioc_status;
1553         u32 ioc_state;
1554         u8 issue_reset = 0;
1555
1556         dctlprintk(ioc, ioc_info(ioc, "%s\n",
1557                                  __func__));
1558
1559         ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
1560         if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
1561                 ioc_err(ioc, "%s: failed due to ioc not operational\n",
1562                         __func__);
1563                 rc = -EAGAIN;
1564                 goto out;
1565         }
1566
1567         if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
1568                 ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
1569                 rc = -EAGAIN;
1570                 goto out;
1571         }
1572
1573         buffer_type = diag_register->buffer_type;
1574         if (!_ctl_diag_capability(ioc, buffer_type)) {
1575                 ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
1576                         __func__, buffer_type);
1577                 return -EPERM;
1578         }
1579
1580         if (diag_register->unique_id == 0) {
1581                 ioc_err(ioc,
1582                     "%s: Invalid UID(0x%08x), buffer_type(0x%02x)\n", __func__,
1583                     diag_register->unique_id, buffer_type);
1584                 return -EINVAL;
1585         }
1586
1587         if ((ioc->diag_buffer_status[buffer_type] &
1588             MPT3_DIAG_BUFFER_IS_APP_OWNED) &&
1589             !(ioc->diag_buffer_status[buffer_type] &
1590             MPT3_DIAG_BUFFER_IS_RELEASED)) {
1591                 ioc_err(ioc,
1592                     "%s: buffer_type(0x%02x) is already registered by application with UID(0x%08x)\n",
1593                     __func__, buffer_type, ioc->unique_id[buffer_type]);
1594                 return -EINVAL;
1595         }
1596
1597         if (ioc->diag_buffer_status[buffer_type] &
1598             MPT3_DIAG_BUFFER_IS_REGISTERED) {
1599                 /*
1600                  * If driver posts buffer initially, then an application wants
1601                  * to Register that buffer (own it) without Releasing first,
1602                  * the application Register command MUST have the same buffer
1603                  * type and size in the Register command (obtained from the
1604                  * Query command). Otherwise that Register command will be
1605                  * failed. If the application has released the buffer but wants
1606                  * to re-register it, it should be allowed as long as the
1607                  * Unique-Id/Size match.
1608                  */
1609
1610                 if (ioc->unique_id[buffer_type] == MPT3DIAGBUFFUNIQUEID &&
1611                     ioc->diag_buffer_sz[buffer_type] ==
1612                     diag_register->requested_buffer_size) {
1613
1614                         if (!(ioc->diag_buffer_status[buffer_type] &
1615                              MPT3_DIAG_BUFFER_IS_RELEASED)) {
1616                                 dctlprintk(ioc, ioc_info(ioc,
1617                                     "%s: diag_buffer (%d) ownership changed. old-ID(0x%08x), new-ID(0x%08x)\n",
1618                                     __func__, buffer_type,
1619                                     ioc->unique_id[buffer_type],
1620                                     diag_register->unique_id));
1621
1622                                 /*
1623                                  * Application wants to own the buffer with
1624                                  * the same size.
1625                                  */
1626                                 ioc->unique_id[buffer_type] =
1627                                     diag_register->unique_id;
1628                                 rc = 0; /* success */
1629                                 goto out;
1630                         }
1631                 } else if (ioc->unique_id[buffer_type] !=
1632                     MPT3DIAGBUFFUNIQUEID) {
1633                         if (ioc->unique_id[buffer_type] !=
1634                             diag_register->unique_id ||
1635                             ioc->diag_buffer_sz[buffer_type] !=
1636                             diag_register->requested_buffer_size ||
1637                             !(ioc->diag_buffer_status[buffer_type] &
1638                             MPT3_DIAG_BUFFER_IS_RELEASED)) {
1639                                 ioc_err(ioc,
1640                                     "%s: already has a registered buffer for buffer_type(0x%02x)\n",
1641                                     __func__, buffer_type);
1642                                 return -EINVAL;
1643                         }
1644                 } else {
1645                         ioc_err(ioc, "%s: already has a registered buffer for buffer_type(0x%02x)\n",
1646                             __func__, buffer_type);
1647                         return -EINVAL;
1648                 }
1649         } else if (ioc->diag_buffer_status[buffer_type] &
1650             MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED) {
1651
1652                 if (ioc->unique_id[buffer_type] != MPT3DIAGBUFFUNIQUEID ||
1653                     ioc->diag_buffer_sz[buffer_type] !=
1654                     diag_register->requested_buffer_size) {
1655
1656                         ioc_err(ioc,
1657                             "%s: already a buffer is allocated for buffer_type(0x%02x) of size %d bytes, so please try registering again with same size\n",
1658                              __func__, buffer_type,
1659                             ioc->diag_buffer_sz[buffer_type]);
1660                         return -EINVAL;
1661                 }
1662         }
1663
1664         if (diag_register->requested_buffer_size % 4)  {
1665                 ioc_err(ioc, "%s: the requested_buffer_size is not 4 byte aligned\n",
1666                         __func__);
1667                 return -EINVAL;
1668         }
1669
1670         smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
1671         if (!smid) {
1672                 ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
1673                 rc = -EAGAIN;
1674                 goto out;
1675         }
1676
1677         rc = 0;
1678         ioc->ctl_cmds.status = MPT3_CMD_PENDING;
1679         memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
1680         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
1681         ioc->ctl_cmds.smid = smid;
1682
1683         request_data = ioc->diag_buffer[buffer_type];
1684         request_data_sz = diag_register->requested_buffer_size;
1685         ioc->unique_id[buffer_type] = diag_register->unique_id;
1686         ioc->diag_buffer_status[buffer_type] &=
1687             MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
1688         memcpy(ioc->product_specific[buffer_type],
1689             diag_register->product_specific, MPT3_PRODUCT_SPECIFIC_DWORDS);
1690         ioc->diagnostic_flags[buffer_type] = diag_register->diagnostic_flags;
1691
1692         if (request_data) {
1693                 request_data_dma = ioc->diag_buffer_dma[buffer_type];
1694                 if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) {
1695                         dma_free_coherent(&ioc->pdev->dev,
1696                                         ioc->diag_buffer_sz[buffer_type],
1697                                         request_data, request_data_dma);
1698                         request_data = NULL;
1699                 }
1700         }
1701
1702         if (request_data == NULL) {
1703                 ioc->diag_buffer_sz[buffer_type] = 0;
1704                 ioc->diag_buffer_dma[buffer_type] = 0;
1705                 request_data = dma_alloc_coherent(&ioc->pdev->dev,
1706                                 request_data_sz, &request_data_dma, GFP_KERNEL);
1707                 if (request_data == NULL) {
1708                         ioc_err(ioc, "%s: failed allocating memory for diag buffers, requested size(%d)\n",
1709                                 __func__, request_data_sz);
1710                         mpt3sas_base_free_smid(ioc, smid);
1711                         rc = -ENOMEM;
1712                         goto out;
1713                 }
1714                 ioc->diag_buffer[buffer_type] = request_data;
1715                 ioc->diag_buffer_sz[buffer_type] = request_data_sz;
1716                 ioc->diag_buffer_dma[buffer_type] = request_data_dma;
1717         }
1718
1719         mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
1720         mpi_request->BufferType = diag_register->buffer_type;
1721         mpi_request->Flags = cpu_to_le32(diag_register->diagnostic_flags);
1722         mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
1723         mpi_request->BufferLength = cpu_to_le32(request_data_sz);
1724         mpi_request->VF_ID = 0; /* TODO */
1725         mpi_request->VP_ID = 0;
1726
1727         dctlprintk(ioc,
1728                    ioc_info(ioc, "%s: diag_buffer(0x%p), dma(0x%llx), sz(%d)\n",
1729                             __func__, request_data,
1730                             (unsigned long long)request_data_dma,
1731                             le32_to_cpu(mpi_request->BufferLength)));
1732
1733         for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
1734                 mpi_request->ProductSpecific[i] =
1735                         cpu_to_le32(ioc->product_specific[buffer_type][i]);
1736
1737         init_completion(&ioc->ctl_cmds.done);
1738         ioc->put_smid_default(ioc, smid);
1739         wait_for_completion_timeout(&ioc->ctl_cmds.done,
1740             MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
1741
1742         if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
1743                 mpt3sas_check_cmd_timeout(ioc,
1744                     ioc->ctl_cmds.status, mpi_request,
1745                     sizeof(Mpi2DiagBufferPostRequest_t)/4, issue_reset);
1746                 goto issue_host_reset;
1747         }
1748
1749         /* process the completed Reply Message Frame */
1750         if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
1751                 ioc_err(ioc, "%s: no reply message\n", __func__);
1752                 rc = -EFAULT;
1753                 goto out;
1754         }
1755
1756         mpi_reply = ioc->ctl_cmds.reply;
1757         ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
1758
1759         if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
1760                 ioc->diag_buffer_status[buffer_type] |=
1761                         MPT3_DIAG_BUFFER_IS_REGISTERED;
1762                 dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
1763         } else {
1764                 ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
1765                          __func__,
1766                          ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
1767                 rc = -EFAULT;
1768         }
1769
1770  issue_host_reset:
1771         if (issue_reset)
1772                 mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
1773
1774  out:
1775
1776         if (rc && request_data) {
1777                 dma_free_coherent(&ioc->pdev->dev, request_data_sz,
1778                     request_data, request_data_dma);
1779                 ioc->diag_buffer_status[buffer_type] &=
1780                     ~MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
1781         }
1782
1783         ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
1784         return rc;
1785 }
1786
1787 /**
1788  * mpt3sas_enable_diag_buffer - enabling diag_buffers support driver load time
1789  * @ioc: per adapter object
1790  * @bits_to_register: bitwise field where trace is bit 0, and snapshot is bit 1
1791  *
1792  * This is called when command line option diag_buffer_enable is enabled
1793  * at driver load time.
1794  */
1795 void
1796 mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc, u8 bits_to_register)
1797 {
1798         struct mpt3_diag_register diag_register;
1799         u32 ret_val;
1800         u32 trace_buff_size = ioc->manu_pg11.HostTraceBufferMaxSizeKB<<10;
1801         u32 min_trace_buff_size = 0;
1802         u32 decr_trace_buff_size = 0;
1803
1804         memset(&diag_register, 0, sizeof(struct mpt3_diag_register));
1805
1806         if (bits_to_register & 1) {
1807                 ioc_info(ioc, "registering trace buffer support\n");
1808                 ioc->diag_trigger_master.MasterData =
1809                     (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
1810                 diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
1811                 diag_register.unique_id =
1812                     (ioc->hba_mpi_version_belonged == MPI2_VERSION) ?
1813                     (MPT2DIAGBUFFUNIQUEID):(MPT3DIAGBUFFUNIQUEID);
1814
1815                 if (trace_buff_size != 0) {
1816                         diag_register.requested_buffer_size = trace_buff_size;
1817                         min_trace_buff_size =
1818                             ioc->manu_pg11.HostTraceBufferMinSizeKB<<10;
1819                         decr_trace_buff_size =
1820                             ioc->manu_pg11.HostTraceBufferDecrementSizeKB<<10;
1821
1822                         if (min_trace_buff_size > trace_buff_size) {
1823                                 /* The buff size is not set correctly */
1824                                 ioc_err(ioc,
1825                                     "Min Trace Buff size (%d KB) greater than Max Trace Buff size (%d KB)\n",
1826                                      min_trace_buff_size>>10,
1827                                      trace_buff_size>>10);
1828                                 ioc_err(ioc,
1829                                     "Using zero Min Trace Buff Size\n");
1830                                 min_trace_buff_size = 0;
1831                         }
1832
1833                         if (decr_trace_buff_size == 0) {
1834                                 /*
1835                                  * retry the min size if decrement
1836                                  * is not available.
1837                                  */
1838                                 decr_trace_buff_size =
1839                                     trace_buff_size - min_trace_buff_size;
1840                         }
1841                 } else {
1842                         /* register for 2MB buffers  */
1843                         diag_register.requested_buffer_size = 2 * (1024 * 1024);
1844                 }
1845
1846                 do {
1847                         ret_val = _ctl_diag_register_2(ioc,  &diag_register);
1848
1849                         if (ret_val == -ENOMEM && min_trace_buff_size &&
1850                             (trace_buff_size - decr_trace_buff_size) >=
1851                             min_trace_buff_size) {
1852                                 /* adjust the buffer size */
1853                                 trace_buff_size -= decr_trace_buff_size;
1854                                 diag_register.requested_buffer_size =
1855                                     trace_buff_size;
1856                         } else
1857                                 break;
1858                 } while (true);
1859
1860                 if (ret_val == -ENOMEM)
1861                         ioc_err(ioc,
1862                             "Cannot allocate trace buffer memory. Last memory tried = %d KB\n",
1863                             diag_register.requested_buffer_size>>10);
1864                 else if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE]
1865                     & MPT3_DIAG_BUFFER_IS_REGISTERED) {
1866                         ioc_err(ioc, "Trace buffer memory %d KB allocated\n",
1867                             diag_register.requested_buffer_size>>10);
1868                         if (ioc->hba_mpi_version_belonged != MPI2_VERSION)
1869                                 ioc->diag_buffer_status[
1870                                     MPI2_DIAG_BUF_TYPE_TRACE] |=
1871                                     MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
1872                 }
1873         }
1874
1875         if (bits_to_register & 2) {
1876                 ioc_info(ioc, "registering snapshot buffer support\n");
1877                 diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_SNAPSHOT;
1878                 /* register for 2MB buffers  */
1879                 diag_register.requested_buffer_size = 2 * (1024 * 1024);
1880                 diag_register.unique_id = 0x7075901;
1881                 _ctl_diag_register_2(ioc,  &diag_register);
1882         }
1883
1884         if (bits_to_register & 4) {
1885                 ioc_info(ioc, "registering extended buffer support\n");
1886                 diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_EXTENDED;
1887                 /* register for 2MB buffers  */
1888                 diag_register.requested_buffer_size = 2 * (1024 * 1024);
1889                 diag_register.unique_id = 0x7075901;
1890                 _ctl_diag_register_2(ioc,  &diag_register);
1891         }
1892 }
1893
1894 /**
1895  * _ctl_diag_register - application register with driver
1896  * @ioc: per adapter object
1897  * @arg: user space buffer containing ioctl content
1898  *
1899  * This will allow the driver to setup any required buffers that will be
1900  * needed by firmware to communicate with the driver.
1901  */
1902 static long
1903 _ctl_diag_register(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1904 {
1905         struct mpt3_diag_register karg;
1906         long rc;
1907
1908         if (copy_from_user(&karg, arg, sizeof(karg))) {
1909                 pr_err("failure at %s:%d/%s()!\n",
1910                     __FILE__, __LINE__, __func__);
1911                 return -EFAULT;
1912         }
1913
1914         rc = _ctl_diag_register_2(ioc, &karg);
1915
1916         if (!rc && (ioc->diag_buffer_status[karg.buffer_type] &
1917             MPT3_DIAG_BUFFER_IS_REGISTERED))
1918                 ioc->diag_buffer_status[karg.buffer_type] |=
1919                     MPT3_DIAG_BUFFER_IS_APP_OWNED;
1920
1921         return rc;
1922 }
1923
1924 /**
1925  * _ctl_diag_unregister - application unregister with driver
1926  * @ioc: per adapter object
1927  * @arg: user space buffer containing ioctl content
1928  *
1929  * This will allow the driver to cleanup any memory allocated for diag
1930  * messages and to free up any resources.
1931  */
1932 static long
1933 _ctl_diag_unregister(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
1934 {
1935         struct mpt3_diag_unregister karg;
1936         void *request_data;
1937         dma_addr_t request_data_dma;
1938         u32 request_data_sz;
1939         u8 buffer_type;
1940
1941         if (copy_from_user(&karg, arg, sizeof(karg))) {
1942                 pr_err("failure at %s:%d/%s()!\n",
1943                     __FILE__, __LINE__, __func__);
1944                 return -EFAULT;
1945         }
1946
1947         dctlprintk(ioc, ioc_info(ioc, "%s\n",
1948                                  __func__));
1949
1950         buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id);
1951         if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) {
1952                 ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n",
1953                     __func__, karg.unique_id);
1954                 return -EINVAL;
1955         }
1956
1957         if (!_ctl_diag_capability(ioc, buffer_type)) {
1958                 ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
1959                         __func__, buffer_type);
1960                 return -EPERM;
1961         }
1962
1963         if ((ioc->diag_buffer_status[buffer_type] &
1964             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
1965                 ioc_err(ioc, "%s: buffer_type(0x%02x) is not registered\n",
1966                         __func__, buffer_type);
1967                 return -EINVAL;
1968         }
1969         if ((ioc->diag_buffer_status[buffer_type] &
1970             MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
1971                 ioc_err(ioc, "%s: buffer_type(0x%02x) has not been released\n",
1972                         __func__, buffer_type);
1973                 return -EINVAL;
1974         }
1975
1976         if (karg.unique_id != ioc->unique_id[buffer_type]) {
1977                 ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
1978                         __func__, karg.unique_id);
1979                 return -EINVAL;
1980         }
1981
1982         request_data = ioc->diag_buffer[buffer_type];
1983         if (!request_data) {
1984                 ioc_err(ioc, "%s: doesn't have memory allocated for buffer_type(0x%02x)\n",
1985                         __func__, buffer_type);
1986                 return -ENOMEM;
1987         }
1988
1989         if (ioc->diag_buffer_status[buffer_type] &
1990             MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED) {
1991                 ioc->unique_id[buffer_type] = MPT3DIAGBUFFUNIQUEID;
1992                 ioc->diag_buffer_status[buffer_type] &=
1993                     ~MPT3_DIAG_BUFFER_IS_APP_OWNED;
1994                 ioc->diag_buffer_status[buffer_type] &=
1995                     ~MPT3_DIAG_BUFFER_IS_REGISTERED;
1996         } else {
1997                 request_data_sz = ioc->diag_buffer_sz[buffer_type];
1998                 request_data_dma = ioc->diag_buffer_dma[buffer_type];
1999                 dma_free_coherent(&ioc->pdev->dev, request_data_sz,
2000                                 request_data, request_data_dma);
2001                 ioc->diag_buffer[buffer_type] = NULL;
2002                 ioc->diag_buffer_status[buffer_type] = 0;
2003         }
2004         return 0;
2005 }
2006
2007 /**
2008  * _ctl_diag_query - query relevant info associated with diag buffers
2009  * @ioc: per adapter object
2010  * @arg: user space buffer containing ioctl content
2011  *
2012  * The application will send only buffer_type and unique_id.  Driver will
2013  * inspect unique_id first, if valid, fill in all the info.  If unique_id is
2014  * 0x00, the driver will return info specified by Buffer Type.
2015  */
2016 static long
2017 _ctl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
2018 {
2019         struct mpt3_diag_query karg;
2020         void *request_data;
2021         int i;
2022         u8 buffer_type;
2023
2024         if (copy_from_user(&karg, arg, sizeof(karg))) {
2025                 pr_err("failure at %s:%d/%s()!\n",
2026                     __FILE__, __LINE__, __func__);
2027                 return -EFAULT;
2028         }
2029
2030         dctlprintk(ioc, ioc_info(ioc, "%s\n",
2031                                  __func__));
2032
2033         karg.application_flags = 0;
2034         buffer_type = karg.buffer_type;
2035
2036         if (!_ctl_diag_capability(ioc, buffer_type)) {
2037                 ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
2038                         __func__, buffer_type);
2039                 return -EPERM;
2040         }
2041
2042         if (!(ioc->diag_buffer_status[buffer_type] &
2043             MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED)) {
2044                 if ((ioc->diag_buffer_status[buffer_type] &
2045                     MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
2046                         ioc_err(ioc, "%s: buffer_type(0x%02x) is not registered\n",
2047                                 __func__, buffer_type);
2048                         return -EINVAL;
2049                 }
2050         }
2051
2052         if (karg.unique_id) {
2053                 if (karg.unique_id != ioc->unique_id[buffer_type]) {
2054                         ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
2055                                 __func__, karg.unique_id);
2056                         return -EINVAL;
2057                 }
2058         }
2059
2060         request_data = ioc->diag_buffer[buffer_type];
2061         if (!request_data) {
2062                 ioc_err(ioc, "%s: doesn't have buffer for buffer_type(0x%02x)\n",
2063                         __func__, buffer_type);
2064                 return -ENOMEM;
2065         }
2066
2067         if ((ioc->diag_buffer_status[buffer_type] &
2068             MPT3_DIAG_BUFFER_IS_REGISTERED))
2069                 karg.application_flags |= MPT3_APP_FLAGS_BUFFER_VALID;
2070
2071         if (!(ioc->diag_buffer_status[buffer_type] &
2072              MPT3_DIAG_BUFFER_IS_RELEASED))
2073                 karg.application_flags |= MPT3_APP_FLAGS_FW_BUFFER_ACCESS;
2074
2075         if (!(ioc->diag_buffer_status[buffer_type] &
2076             MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED))
2077                 karg.application_flags |= MPT3_APP_FLAGS_DYNAMIC_BUFFER_ALLOC;
2078
2079         if ((ioc->diag_buffer_status[buffer_type] &
2080             MPT3_DIAG_BUFFER_IS_APP_OWNED))
2081                 karg.application_flags |= MPT3_APP_FLAGS_APP_OWNED;
2082
2083         for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
2084                 karg.product_specific[i] =
2085                     ioc->product_specific[buffer_type][i];
2086
2087         karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type];
2088         karg.driver_added_buffer_size = 0;
2089         karg.unique_id = ioc->unique_id[buffer_type];
2090         karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type];
2091
2092         if (copy_to_user(arg, &karg, sizeof(struct mpt3_diag_query))) {
2093                 ioc_err(ioc, "%s: unable to write mpt3_diag_query data @ %p\n",
2094                         __func__, arg);
2095                 return -EFAULT;
2096         }
2097         return 0;
2098 }
2099
2100 /**
2101  * mpt3sas_send_diag_release - Diag Release Message
2102  * @ioc: per adapter object
2103  * @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
2104  * @issue_reset: specifies whether host reset is required.
2105  *
2106  */
2107 int
2108 mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
2109         u8 *issue_reset)
2110 {
2111         Mpi2DiagReleaseRequest_t *mpi_request;
2112         Mpi2DiagReleaseReply_t *mpi_reply;
2113         u16 smid;
2114         u16 ioc_status;
2115         u32 ioc_state;
2116         int rc;
2117         u8 reset_needed = 0;
2118
2119         dctlprintk(ioc, ioc_info(ioc, "%s\n",
2120                                  __func__));
2121
2122         rc = 0;
2123         *issue_reset = 0;
2124
2125
2126         ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
2127         if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
2128                 if (ioc->diag_buffer_status[buffer_type] &
2129                     MPT3_DIAG_BUFFER_IS_REGISTERED)
2130                         ioc->diag_buffer_status[buffer_type] |=
2131                             MPT3_DIAG_BUFFER_IS_RELEASED;
2132                 dctlprintk(ioc,
2133                            ioc_info(ioc, "%s: skipping due to FAULT state\n",
2134                                     __func__));
2135                 rc = -EAGAIN;
2136                 goto out;
2137         }
2138
2139         if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
2140                 ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
2141                 rc = -EAGAIN;
2142                 goto out;
2143         }
2144
2145         smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
2146         if (!smid) {
2147                 ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
2148                 rc = -EAGAIN;
2149                 goto out;
2150         }
2151
2152         ioc->ctl_cmds.status = MPT3_CMD_PENDING;
2153         memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
2154         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
2155         ioc->ctl_cmds.smid = smid;
2156
2157         mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE;
2158         mpi_request->BufferType = buffer_type;
2159         mpi_request->VF_ID = 0; /* TODO */
2160         mpi_request->VP_ID = 0;
2161
2162         init_completion(&ioc->ctl_cmds.done);
2163         ioc->put_smid_default(ioc, smid);
2164         wait_for_completion_timeout(&ioc->ctl_cmds.done,
2165             MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
2166
2167         if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
2168                 mpt3sas_check_cmd_timeout(ioc,
2169                     ioc->ctl_cmds.status, mpi_request,
2170                     sizeof(Mpi2DiagReleaseRequest_t)/4, reset_needed);
2171                  *issue_reset = reset_needed;
2172                 rc = -EFAULT;
2173                 goto out;
2174         }
2175
2176         /* process the completed Reply Message Frame */
2177         if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
2178                 ioc_err(ioc, "%s: no reply message\n", __func__);
2179                 rc = -EFAULT;
2180                 goto out;
2181         }
2182
2183         mpi_reply = ioc->ctl_cmds.reply;
2184         ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
2185
2186         if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
2187                 ioc->diag_buffer_status[buffer_type] |=
2188                     MPT3_DIAG_BUFFER_IS_RELEASED;
2189                 dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
2190         } else {
2191                 ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
2192                          __func__,
2193                          ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
2194                 rc = -EFAULT;
2195         }
2196
2197  out:
2198         ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
2199         return rc;
2200 }
2201
2202 /**
2203  * _ctl_diag_release - request to send Diag Release Message to firmware
2204  * @ioc: ?
2205  * @arg: user space buffer containing ioctl content
2206  *
2207  * This allows ownership of the specified buffer to returned to the driver,
2208  * allowing an application to read the buffer without fear that firmware is
2209  * overwriting information in the buffer.
2210  */
2211 static long
2212 _ctl_diag_release(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
2213 {
2214         struct mpt3_diag_release karg;
2215         void *request_data;
2216         int rc;
2217         u8 buffer_type;
2218         u8 issue_reset = 0;
2219
2220         if (copy_from_user(&karg, arg, sizeof(karg))) {
2221                 pr_err("failure at %s:%d/%s()!\n",
2222                     __FILE__, __LINE__, __func__);
2223                 return -EFAULT;
2224         }
2225
2226         dctlprintk(ioc, ioc_info(ioc, "%s\n",
2227                                  __func__));
2228
2229         buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id);
2230         if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) {
2231                 ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n",
2232                     __func__, karg.unique_id);
2233                 return -EINVAL;
2234         }
2235
2236         if (!_ctl_diag_capability(ioc, buffer_type)) {
2237                 ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
2238                         __func__, buffer_type);
2239                 return -EPERM;
2240         }
2241
2242         if ((ioc->diag_buffer_status[buffer_type] &
2243             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
2244                 ioc_err(ioc, "%s: buffer_type(0x%02x) is not registered\n",
2245                         __func__, buffer_type);
2246                 return -EINVAL;
2247         }
2248
2249         if (karg.unique_id != ioc->unique_id[buffer_type]) {
2250                 ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
2251                         __func__, karg.unique_id);
2252                 return -EINVAL;
2253         }
2254
2255         if (ioc->diag_buffer_status[buffer_type] &
2256             MPT3_DIAG_BUFFER_IS_RELEASED) {
2257                 ioc_err(ioc, "%s: buffer_type(0x%02x) is already released\n",
2258                         __func__, buffer_type);
2259                 return -EINVAL;
2260         }
2261
2262         request_data = ioc->diag_buffer[buffer_type];
2263
2264         if (!request_data) {
2265                 ioc_err(ioc, "%s: doesn't have memory allocated for buffer_type(0x%02x)\n",
2266                         __func__, buffer_type);
2267                 return -ENOMEM;
2268         }
2269
2270         /* buffers were released by due to host reset */
2271         if ((ioc->diag_buffer_status[buffer_type] &
2272             MPT3_DIAG_BUFFER_IS_DIAG_RESET)) {
2273                 ioc->diag_buffer_status[buffer_type] |=
2274                     MPT3_DIAG_BUFFER_IS_RELEASED;
2275                 ioc->diag_buffer_status[buffer_type] &=
2276                     ~MPT3_DIAG_BUFFER_IS_DIAG_RESET;
2277                 ioc_err(ioc, "%s: buffer_type(0x%02x) was released due to host reset\n",
2278                         __func__, buffer_type);
2279                 return 0;
2280         }
2281
2282         rc = mpt3sas_send_diag_release(ioc, buffer_type, &issue_reset);
2283
2284         if (issue_reset)
2285                 mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
2286
2287         return rc;
2288 }
2289
2290 /**
2291  * _ctl_diag_read_buffer - request for copy of the diag buffer
2292  * @ioc: per adapter object
2293  * @arg: user space buffer containing ioctl content
2294  */
2295 static long
2296 _ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
2297 {
2298         struct mpt3_diag_read_buffer karg;
2299         struct mpt3_diag_read_buffer __user *uarg = arg;
2300         void *request_data, *diag_data;
2301         Mpi2DiagBufferPostRequest_t *mpi_request;
2302         Mpi2DiagBufferPostReply_t *mpi_reply;
2303         int rc, i;
2304         u8 buffer_type;
2305         unsigned long request_size, copy_size;
2306         u16 smid;
2307         u16 ioc_status;
2308         u8 issue_reset = 0;
2309
2310         if (copy_from_user(&karg, arg, sizeof(karg))) {
2311                 pr_err("failure at %s:%d/%s()!\n",
2312                     __FILE__, __LINE__, __func__);
2313                 return -EFAULT;
2314         }
2315
2316         dctlprintk(ioc, ioc_info(ioc, "%s\n",
2317                                  __func__));
2318
2319         buffer_type = _ctl_diag_get_bufftype(ioc, karg.unique_id);
2320         if (buffer_type == MPT3_DIAG_UID_NOT_FOUND) {
2321                 ioc_err(ioc, "%s: buffer with unique_id(0x%08x) not found\n",
2322                     __func__, karg.unique_id);
2323                 return -EINVAL;
2324         }
2325
2326         if (!_ctl_diag_capability(ioc, buffer_type)) {
2327                 ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
2328                         __func__, buffer_type);
2329                 return -EPERM;
2330         }
2331
2332         if (karg.unique_id != ioc->unique_id[buffer_type]) {
2333                 ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
2334                         __func__, karg.unique_id);
2335                 return -EINVAL;
2336         }
2337
2338         request_data = ioc->diag_buffer[buffer_type];
2339         if (!request_data) {
2340                 ioc_err(ioc, "%s: doesn't have buffer for buffer_type(0x%02x)\n",
2341                         __func__, buffer_type);
2342                 return -ENOMEM;
2343         }
2344
2345         request_size = ioc->diag_buffer_sz[buffer_type];
2346
2347         if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) {
2348                 ioc_err(ioc, "%s: either the starting_offset or bytes_to_read are not 4 byte aligned\n",
2349                         __func__);
2350                 return -EINVAL;
2351         }
2352
2353         if (karg.starting_offset > request_size)
2354                 return -EINVAL;
2355
2356         diag_data = (void *)(request_data + karg.starting_offset);
2357         dctlprintk(ioc,
2358                    ioc_info(ioc, "%s: diag_buffer(%p), offset(%d), sz(%d)\n",
2359                             __func__, diag_data, karg.starting_offset,
2360                             karg.bytes_to_read));
2361
2362         /* Truncate data on requests that are too large */
2363         if ((diag_data + karg.bytes_to_read < diag_data) ||
2364             (diag_data + karg.bytes_to_read > request_data + request_size))
2365                 copy_size = request_size - karg.starting_offset;
2366         else
2367                 copy_size = karg.bytes_to_read;
2368
2369         if (copy_to_user((void __user *)uarg->diagnostic_data,
2370             diag_data, copy_size)) {
2371                 ioc_err(ioc, "%s: Unable to write mpt_diag_read_buffer_t data @ %p\n",
2372                         __func__, diag_data);
2373                 return -EFAULT;
2374         }
2375
2376         if ((karg.flags & MPT3_FLAGS_REREGISTER) == 0)
2377                 return 0;
2378
2379         dctlprintk(ioc,
2380                    ioc_info(ioc, "%s: Reregister buffer_type(0x%02x)\n",
2381                             __func__, buffer_type));
2382         if ((ioc->diag_buffer_status[buffer_type] &
2383             MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
2384                 dctlprintk(ioc,
2385                            ioc_info(ioc, "%s: buffer_type(0x%02x) is still registered\n",
2386                                     __func__, buffer_type));
2387                 return 0;
2388         }
2389         /* Get a free request frame and save the message context.
2390         */
2391
2392         if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
2393                 ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
2394                 rc = -EAGAIN;
2395                 goto out;
2396         }
2397
2398         smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
2399         if (!smid) {
2400                 ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
2401                 rc = -EAGAIN;
2402                 goto out;
2403         }
2404
2405         rc = 0;
2406         ioc->ctl_cmds.status = MPT3_CMD_PENDING;
2407         memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
2408         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
2409         ioc->ctl_cmds.smid = smid;
2410
2411         mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
2412         mpi_request->BufferType = buffer_type;
2413         mpi_request->BufferLength =
2414             cpu_to_le32(ioc->diag_buffer_sz[buffer_type]);
2415         mpi_request->BufferAddress =
2416             cpu_to_le64(ioc->diag_buffer_dma[buffer_type]);
2417         for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
2418                 mpi_request->ProductSpecific[i] =
2419                         cpu_to_le32(ioc->product_specific[buffer_type][i]);
2420         mpi_request->VF_ID = 0; /* TODO */
2421         mpi_request->VP_ID = 0;
2422
2423         init_completion(&ioc->ctl_cmds.done);
2424         ioc->put_smid_default(ioc, smid);
2425         wait_for_completion_timeout(&ioc->ctl_cmds.done,
2426             MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
2427
2428         if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
2429                 mpt3sas_check_cmd_timeout(ioc,
2430                     ioc->ctl_cmds.status, mpi_request,
2431                     sizeof(Mpi2DiagBufferPostRequest_t)/4, issue_reset);
2432                 goto issue_host_reset;
2433         }
2434
2435         /* process the completed Reply Message Frame */
2436         if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
2437                 ioc_err(ioc, "%s: no reply message\n", __func__);
2438                 rc = -EFAULT;
2439                 goto out;
2440         }
2441
2442         mpi_reply = ioc->ctl_cmds.reply;
2443         ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
2444
2445         if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
2446                 ioc->diag_buffer_status[buffer_type] |=
2447                     MPT3_DIAG_BUFFER_IS_REGISTERED;
2448                 ioc->diag_buffer_status[buffer_type] &=
2449                     ~MPT3_DIAG_BUFFER_IS_RELEASED;
2450                 dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
2451         } else {
2452                 ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
2453                          __func__, ioc_status,
2454                          le32_to_cpu(mpi_reply->IOCLogInfo));
2455                 rc = -EFAULT;
2456         }
2457
2458  issue_host_reset:
2459         if (issue_reset)
2460                 mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
2461
2462  out:
2463
2464         ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
2465         return rc;
2466 }
2467
2468
2469
2470 #ifdef CONFIG_COMPAT
2471 /**
2472  * _ctl_compat_mpt_command - convert 32bit pointers to 64bit.
2473  * @ioc: per adapter object
2474  * @cmd: ioctl opcode
2475  * @arg: (struct mpt3_ioctl_command32)
2476  *
2477  * MPT3COMMAND32 - Handle 32bit applications running on 64bit os.
2478  */
2479 static long
2480 _ctl_compat_mpt_command(struct MPT3SAS_ADAPTER *ioc, unsigned cmd,
2481         void __user *arg)
2482 {
2483         struct mpt3_ioctl_command32 karg32;
2484         struct mpt3_ioctl_command32 __user *uarg;
2485         struct mpt3_ioctl_command karg;
2486
2487         if (_IOC_SIZE(cmd) != sizeof(struct mpt3_ioctl_command32))
2488                 return -EINVAL;
2489
2490         uarg = (struct mpt3_ioctl_command32 __user *) arg;
2491
2492         if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) {
2493                 pr_err("failure at %s:%d/%s()!\n",
2494                     __FILE__, __LINE__, __func__);
2495                 return -EFAULT;
2496         }
2497
2498         memset(&karg, 0, sizeof(struct mpt3_ioctl_command));
2499         karg.hdr.ioc_number = karg32.hdr.ioc_number;
2500         karg.hdr.port_number = karg32.hdr.port_number;
2501         karg.hdr.max_data_size = karg32.hdr.max_data_size;
2502         karg.timeout = karg32.timeout;
2503         karg.max_reply_bytes = karg32.max_reply_bytes;
2504         karg.data_in_size = karg32.data_in_size;
2505         karg.data_out_size = karg32.data_out_size;
2506         karg.max_sense_bytes = karg32.max_sense_bytes;
2507         karg.data_sge_offset = karg32.data_sge_offset;
2508         karg.reply_frame_buf_ptr = compat_ptr(karg32.reply_frame_buf_ptr);
2509         karg.data_in_buf_ptr = compat_ptr(karg32.data_in_buf_ptr);
2510         karg.data_out_buf_ptr = compat_ptr(karg32.data_out_buf_ptr);
2511         karg.sense_data_ptr = compat_ptr(karg32.sense_data_ptr);
2512         return _ctl_do_mpt_command(ioc, karg, &uarg->mf);
2513 }
2514 #endif
2515
2516 /**
2517  * _ctl_ioctl_main - main ioctl entry point
2518  * @file:  (struct file)
2519  * @cmd:  ioctl opcode
2520  * @arg:  user space data buffer
2521  * @compat:  handles 32 bit applications in 64bit os
2522  * @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
2523  * MPI25_VERSION | MPI26_VERSION for mpt3ctl ioctl device.
2524  */
2525 static long
2526 _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
2527         u8 compat, u16 mpi_version)
2528 {
2529         struct MPT3SAS_ADAPTER *ioc;
2530         struct mpt3_ioctl_header ioctl_header;
2531         enum block_state state;
2532         long ret = -EINVAL;
2533
2534         /* get IOCTL header */
2535         if (copy_from_user(&ioctl_header, (char __user *)arg,
2536             sizeof(struct mpt3_ioctl_header))) {
2537                 pr_err("failure at %s:%d/%s()!\n",
2538                     __FILE__, __LINE__, __func__);
2539                 return -EFAULT;
2540         }
2541
2542         if (_ctl_verify_adapter(ioctl_header.ioc_number,
2543                                 &ioc, mpi_version) == -1 || !ioc)
2544                 return -ENODEV;
2545
2546         /* pci_access_mutex lock acquired by ioctl path */
2547         mutex_lock(&ioc->pci_access_mutex);
2548
2549         if (ioc->shost_recovery || ioc->pci_error_recovery ||
2550             ioc->is_driver_loading || ioc->remove_host) {
2551                 ret = -EAGAIN;
2552                 goto out_unlock_pciaccess;
2553         }
2554
2555         state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
2556         if (state == NON_BLOCKING) {
2557                 if (!mutex_trylock(&ioc->ctl_cmds.mutex)) {
2558                         ret = -EAGAIN;
2559                         goto out_unlock_pciaccess;
2560                 }
2561         } else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) {
2562                 ret = -ERESTARTSYS;
2563                 goto out_unlock_pciaccess;
2564         }
2565
2566
2567         switch (cmd) {
2568         case MPT3IOCINFO:
2569                 if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_iocinfo))
2570                         ret = _ctl_getiocinfo(ioc, arg);
2571                 break;
2572 #ifdef CONFIG_COMPAT
2573         case MPT3COMMAND32:
2574 #endif
2575         case MPT3COMMAND:
2576         {
2577                 struct mpt3_ioctl_command __user *uarg;
2578                 struct mpt3_ioctl_command karg;
2579
2580 #ifdef CONFIG_COMPAT
2581                 if (compat) {
2582                         ret = _ctl_compat_mpt_command(ioc, cmd, arg);
2583                         break;
2584                 }
2585 #endif
2586                 if (copy_from_user(&karg, arg, sizeof(karg))) {
2587                         pr_err("failure at %s:%d/%s()!\n",
2588                             __FILE__, __LINE__, __func__);
2589                         ret = -EFAULT;
2590                         break;
2591                 }
2592
2593                 if (karg.hdr.ioc_number != ioctl_header.ioc_number) {
2594                         ret = -EINVAL;
2595                         break;
2596                 }
2597                 if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_command)) {
2598                         uarg = arg;
2599                         ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf);
2600                 }
2601                 break;
2602         }
2603         case MPT3EVENTQUERY:
2604                 if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_eventquery))
2605                         ret = _ctl_eventquery(ioc, arg);
2606                 break;
2607         case MPT3EVENTENABLE:
2608                 if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_eventenable))
2609                         ret = _ctl_eventenable(ioc, arg);
2610                 break;
2611         case MPT3EVENTREPORT:
2612                 ret = _ctl_eventreport(ioc, arg);
2613                 break;
2614         case MPT3HARDRESET:
2615                 if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_diag_reset))
2616                         ret = _ctl_do_reset(ioc, arg);
2617                 break;
2618         case MPT3BTDHMAPPING:
2619                 if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_btdh_mapping))
2620                         ret = _ctl_btdh_mapping(ioc, arg);
2621                 break;
2622         case MPT3DIAGREGISTER:
2623                 if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_register))
2624                         ret = _ctl_diag_register(ioc, arg);
2625                 break;
2626         case MPT3DIAGUNREGISTER:
2627                 if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_unregister))
2628                         ret = _ctl_diag_unregister(ioc, arg);
2629                 break;
2630         case MPT3DIAGQUERY:
2631                 if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_query))
2632                         ret = _ctl_diag_query(ioc, arg);
2633                 break;
2634         case MPT3DIAGRELEASE:
2635                 if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_release))
2636                         ret = _ctl_diag_release(ioc, arg);
2637                 break;
2638         case MPT3DIAGREADBUFFER:
2639                 if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_read_buffer))
2640                         ret = _ctl_diag_read_buffer(ioc, arg);
2641                 break;
2642         default:
2643                 dctlprintk(ioc,
2644                            ioc_info(ioc, "unsupported ioctl opcode(0x%08x)\n",
2645                                     cmd));
2646                 break;
2647         }
2648
2649         mutex_unlock(&ioc->ctl_cmds.mutex);
2650 out_unlock_pciaccess:
2651         mutex_unlock(&ioc->pci_access_mutex);
2652         return ret;
2653 }
2654
2655 /**
2656  * _ctl_ioctl - mpt3ctl main ioctl entry point (unlocked)
2657  * @file: (struct file)
2658  * @cmd: ioctl opcode
2659  * @arg: ?
2660  */
2661 static long
2662 _ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
2663 {
2664         long ret;
2665
2666         /* pass MPI25_VERSION | MPI26_VERSION value,
2667          * to indicate that this ioctl cmd
2668          * came from mpt3ctl ioctl device.
2669          */
2670         ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0,
2671                 MPI25_VERSION | MPI26_VERSION);
2672         return ret;
2673 }
2674
2675 /**
2676  * _ctl_mpt2_ioctl - mpt2ctl main ioctl entry point (unlocked)
2677  * @file: (struct file)
2678  * @cmd: ioctl opcode
2679  * @arg: ?
2680  */
2681 static long
2682 _ctl_mpt2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
2683 {
2684         long ret;
2685
2686         /* pass MPI2_VERSION value, to indicate that this ioctl cmd
2687          * came from mpt2ctl ioctl device.
2688          */
2689         ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0, MPI2_VERSION);
2690         return ret;
2691 }
2692 #ifdef CONFIG_COMPAT
2693 /**
2694  *_ ctl_ioctl_compat - main ioctl entry point (compat)
2695  * @file: ?
2696  * @cmd: ?
2697  * @arg: ?
2698  *
2699  * This routine handles 32 bit applications in 64bit os.
2700  */
2701 static long
2702 _ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
2703 {
2704         long ret;
2705
2706         ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1,
2707                 MPI25_VERSION | MPI26_VERSION);
2708         return ret;
2709 }
2710
2711 /**
2712  *_ ctl_mpt2_ioctl_compat - main ioctl entry point (compat)
2713  * @file: ?
2714  * @cmd: ?
2715  * @arg: ?
2716  *
2717  * This routine handles 32 bit applications in 64bit os.
2718  */
2719 static long
2720 _ctl_mpt2_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
2721 {
2722         long ret;
2723
2724         ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1, MPI2_VERSION);
2725         return ret;
2726 }
2727 #endif
2728
2729 /* scsi host attributes */
2730 /**
2731  * version_fw_show - firmware version
2732  * @cdev: pointer to embedded class device
2733  * @attr: ?
2734  * @buf: the buffer returned
2735  *
2736  * A sysfs 'read-only' shost attribute.
2737  */
2738 static ssize_t
2739 version_fw_show(struct device *cdev, struct device_attribute *attr,
2740         char *buf)
2741 {
2742         struct Scsi_Host *shost = class_to_shost(cdev);
2743         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2744
2745         return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
2746             (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
2747             (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
2748             (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
2749             ioc->facts.FWVersion.Word & 0x000000FF);
2750 }
2751 static DEVICE_ATTR_RO(version_fw);
2752
2753 /**
2754  * version_bios_show - bios version
2755  * @cdev: pointer to embedded class device
2756  * @attr: ?
2757  * @buf: the buffer returned
2758  *
2759  * A sysfs 'read-only' shost attribute.
2760  */
2761 static ssize_t
2762 version_bios_show(struct device *cdev, struct device_attribute *attr,
2763         char *buf)
2764 {
2765         struct Scsi_Host *shost = class_to_shost(cdev);
2766         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2767
2768         u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
2769
2770         return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
2771             (version & 0xFF000000) >> 24,
2772             (version & 0x00FF0000) >> 16,
2773             (version & 0x0000FF00) >> 8,
2774             version & 0x000000FF);
2775 }
2776 static DEVICE_ATTR_RO(version_bios);
2777
2778 /**
2779  * version_mpi_show - MPI (message passing interface) version
2780  * @cdev: pointer to embedded class device
2781  * @attr: ?
2782  * @buf: the buffer returned
2783  *
2784  * A sysfs 'read-only' shost attribute.
2785  */
2786 static ssize_t
2787 version_mpi_show(struct device *cdev, struct device_attribute *attr,
2788         char *buf)
2789 {
2790         struct Scsi_Host *shost = class_to_shost(cdev);
2791         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2792
2793         return snprintf(buf, PAGE_SIZE, "%03x.%02x\n",
2794             ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8);
2795 }
2796 static DEVICE_ATTR_RO(version_mpi);
2797
2798 /**
2799  * version_product_show - product name
2800  * @cdev: pointer to embedded class device
2801  * @attr: ?
2802  * @buf: the buffer returned
2803  *
2804  * A sysfs 'read-only' shost attribute.
2805  */
2806 static ssize_t
2807 version_product_show(struct device *cdev, struct device_attribute *attr,
2808         char *buf)
2809 {
2810         struct Scsi_Host *shost = class_to_shost(cdev);
2811         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2812
2813         return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName);
2814 }
2815 static DEVICE_ATTR_RO(version_product);
2816
2817 /**
2818  * version_nvdata_persistent_show - ndvata persistent version
2819  * @cdev: pointer to embedded class device
2820  * @attr: ?
2821  * @buf: the buffer returned
2822  *
2823  * A sysfs 'read-only' shost attribute.
2824  */
2825 static ssize_t
2826 version_nvdata_persistent_show(struct device *cdev,
2827         struct device_attribute *attr, char *buf)
2828 {
2829         struct Scsi_Host *shost = class_to_shost(cdev);
2830         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2831
2832         return snprintf(buf, PAGE_SIZE, "%08xh\n",
2833             le32_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word));
2834 }
2835 static DEVICE_ATTR_RO(version_nvdata_persistent);
2836
2837 /**
2838  * version_nvdata_default_show - nvdata default version
2839  * @cdev: pointer to embedded class device
2840  * @attr: ?
2841  * @buf: the buffer returned
2842  *
2843  * A sysfs 'read-only' shost attribute.
2844  */
2845 static ssize_t
2846 version_nvdata_default_show(struct device *cdev, struct device_attribute
2847         *attr, char *buf)
2848 {
2849         struct Scsi_Host *shost = class_to_shost(cdev);
2850         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2851
2852         return snprintf(buf, PAGE_SIZE, "%08xh\n",
2853             le32_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word));
2854 }
2855 static DEVICE_ATTR_RO(version_nvdata_default);
2856
2857 /**
2858  * board_name_show - board name
2859  * @cdev: pointer to embedded class device
2860  * @attr: ?
2861  * @buf: the buffer returned
2862  *
2863  * A sysfs 'read-only' shost attribute.
2864  */
2865 static ssize_t
2866 board_name_show(struct device *cdev, struct device_attribute *attr,
2867         char *buf)
2868 {
2869         struct Scsi_Host *shost = class_to_shost(cdev);
2870         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2871
2872         return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName);
2873 }
2874 static DEVICE_ATTR_RO(board_name);
2875
2876 /**
2877  * board_assembly_show - board assembly name
2878  * @cdev: pointer to embedded class device
2879  * @attr: ?
2880  * @buf: the buffer returned
2881  *
2882  * A sysfs 'read-only' shost attribute.
2883  */
2884 static ssize_t
2885 board_assembly_show(struct device *cdev, struct device_attribute *attr,
2886         char *buf)
2887 {
2888         struct Scsi_Host *shost = class_to_shost(cdev);
2889         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2890
2891         return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly);
2892 }
2893 static DEVICE_ATTR_RO(board_assembly);
2894
2895 /**
2896  * board_tracer_show - board tracer number
2897  * @cdev: pointer to embedded class device
2898  * @attr: ?
2899  * @buf: the buffer returned
2900  *
2901  * A sysfs 'read-only' shost attribute.
2902  */
2903 static ssize_t
2904 board_tracer_show(struct device *cdev, struct device_attribute *attr,
2905         char *buf)
2906 {
2907         struct Scsi_Host *shost = class_to_shost(cdev);
2908         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2909
2910         return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber);
2911 }
2912 static DEVICE_ATTR_RO(board_tracer);
2913
2914 /**
2915  * io_delay_show - io missing delay
2916  * @cdev: pointer to embedded class device
2917  * @attr: ?
2918  * @buf: the buffer returned
2919  *
2920  * This is for firmware implemention for deboucing device
2921  * removal events.
2922  *
2923  * A sysfs 'read-only' shost attribute.
2924  */
2925 static ssize_t
2926 io_delay_show(struct device *cdev, struct device_attribute *attr,
2927         char *buf)
2928 {
2929         struct Scsi_Host *shost = class_to_shost(cdev);
2930         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2931
2932         return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
2933 }
2934 static DEVICE_ATTR_RO(io_delay);
2935
2936 /**
2937  * device_delay_show - device missing delay
2938  * @cdev: pointer to embedded class device
2939  * @attr: ?
2940  * @buf: the buffer returned
2941  *
2942  * This is for firmware implemention for deboucing device
2943  * removal events.
2944  *
2945  * A sysfs 'read-only' shost attribute.
2946  */
2947 static ssize_t
2948 device_delay_show(struct device *cdev, struct device_attribute *attr,
2949         char *buf)
2950 {
2951         struct Scsi_Host *shost = class_to_shost(cdev);
2952         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2953
2954         return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
2955 }
2956 static DEVICE_ATTR_RO(device_delay);
2957
2958 /**
2959  * fw_queue_depth_show - global credits
2960  * @cdev: pointer to embedded class device
2961  * @attr: ?
2962  * @buf: the buffer returned
2963  *
2964  * This is firmware queue depth limit
2965  *
2966  * A sysfs 'read-only' shost attribute.
2967  */
2968 static ssize_t
2969 fw_queue_depth_show(struct device *cdev, struct device_attribute *attr,
2970         char *buf)
2971 {
2972         struct Scsi_Host *shost = class_to_shost(cdev);
2973         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2974
2975         return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit);
2976 }
2977 static DEVICE_ATTR_RO(fw_queue_depth);
2978
2979 /**
2980  * sas_address_show - sas address
2981  * @cdev: pointer to embedded class device
2982  * @attr: ?
2983  * @buf: the buffer returned
2984  *
2985  * This is the controller sas address
2986  *
2987  * A sysfs 'read-only' shost attribute.
2988  */
2989 static ssize_t
2990 host_sas_address_show(struct device *cdev, struct device_attribute *attr,
2991         char *buf)
2992
2993 {
2994         struct Scsi_Host *shost = class_to_shost(cdev);
2995         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
2996
2997         return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
2998             (unsigned long long)ioc->sas_hba.sas_address);
2999 }
3000 static DEVICE_ATTR_RO(host_sas_address);
3001
3002 /**
3003  * logging_level_show - logging level
3004  * @cdev: pointer to embedded class device
3005  * @attr: ?
3006  * @buf: the buffer returned
3007  *
3008  * A sysfs 'read/write' shost attribute.
3009  */
3010 static ssize_t
3011 logging_level_show(struct device *cdev, struct device_attribute *attr,
3012         char *buf)
3013 {
3014         struct Scsi_Host *shost = class_to_shost(cdev);
3015         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3016
3017         return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level);
3018 }
3019 static ssize_t
3020 logging_level_store(struct device *cdev, struct device_attribute *attr,
3021         const char *buf, size_t count)
3022 {
3023         struct Scsi_Host *shost = class_to_shost(cdev);
3024         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3025         int val = 0;
3026
3027         if (sscanf(buf, "%x", &val) != 1)
3028                 return -EINVAL;
3029
3030         ioc->logging_level = val;
3031         ioc_info(ioc, "logging_level=%08xh\n",
3032                  ioc->logging_level);
3033         return strlen(buf);
3034 }
3035 static DEVICE_ATTR_RW(logging_level);
3036
3037 /**
3038  * fwfault_debug_show - show/store fwfault_debug
3039  * @cdev: pointer to embedded class device
3040  * @attr: ?
3041  * @buf: the buffer returned
3042  *
3043  * mpt3sas_fwfault_debug is command line option
3044  * A sysfs 'read/write' shost attribute.
3045  */
3046 static ssize_t
3047 fwfault_debug_show(struct device *cdev, struct device_attribute *attr,
3048         char *buf)
3049 {
3050         struct Scsi_Host *shost = class_to_shost(cdev);
3051         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3052
3053         return snprintf(buf, PAGE_SIZE, "%d\n", ioc->fwfault_debug);
3054 }
3055 static ssize_t
3056 fwfault_debug_store(struct device *cdev, struct device_attribute *attr,
3057         const char *buf, size_t count)
3058 {
3059         struct Scsi_Host *shost = class_to_shost(cdev);
3060         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3061         int val = 0;
3062
3063         if (sscanf(buf, "%d", &val) != 1)
3064                 return -EINVAL;
3065
3066         ioc->fwfault_debug = val;
3067         ioc_info(ioc, "fwfault_debug=%d\n",
3068                  ioc->fwfault_debug);
3069         return strlen(buf);
3070 }
3071 static DEVICE_ATTR_RW(fwfault_debug);
3072
3073 /**
3074  * ioc_reset_count_show - ioc reset count
3075  * @cdev: pointer to embedded class device
3076  * @attr: ?
3077  * @buf: the buffer returned
3078  *
3079  * This is firmware queue depth limit
3080  *
3081  * A sysfs 'read-only' shost attribute.
3082  */
3083 static ssize_t
3084 ioc_reset_count_show(struct device *cdev, struct device_attribute *attr,
3085         char *buf)
3086 {
3087         struct Scsi_Host *shost = class_to_shost(cdev);
3088         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3089
3090         return snprintf(buf, PAGE_SIZE, "%d\n", ioc->ioc_reset_count);
3091 }
3092 static DEVICE_ATTR_RO(ioc_reset_count);
3093
3094 /**
3095  * reply_queue_count_show - number of reply queues
3096  * @cdev: pointer to embedded class device
3097  * @attr: ?
3098  * @buf: the buffer returned
3099  *
3100  * This is number of reply queues
3101  *
3102  * A sysfs 'read-only' shost attribute.
3103  */
3104 static ssize_t
3105 reply_queue_count_show(struct device *cdev,
3106         struct device_attribute *attr, char *buf)
3107 {
3108         u8 reply_queue_count;
3109         struct Scsi_Host *shost = class_to_shost(cdev);
3110         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3111
3112         if ((ioc->facts.IOCCapabilities &
3113             MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable)
3114                 reply_queue_count = ioc->reply_queue_count;
3115         else
3116                 reply_queue_count = 1;
3117
3118         return snprintf(buf, PAGE_SIZE, "%d\n", reply_queue_count);
3119 }
3120 static DEVICE_ATTR_RO(reply_queue_count);
3121
3122 /**
3123  * BRM_status_show - Backup Rail Monitor Status
3124  * @cdev: pointer to embedded class device
3125  * @attr: ?
3126  * @buf: the buffer returned
3127  *
3128  * This is number of reply queues
3129  *
3130  * A sysfs 'read-only' shost attribute.
3131  */
3132 static ssize_t
3133 BRM_status_show(struct device *cdev, struct device_attribute *attr,
3134         char *buf)
3135 {
3136         struct Scsi_Host *shost = class_to_shost(cdev);
3137         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3138         Mpi2IOUnitPage3_t *io_unit_pg3 = NULL;
3139         Mpi2ConfigReply_t mpi_reply;
3140         u16 backup_rail_monitor_status = 0;
3141         u16 ioc_status;
3142         int sz;
3143         ssize_t rc = 0;
3144
3145         if (!ioc->is_warpdrive) {
3146                 ioc_err(ioc, "%s: BRM attribute is only for warpdrive\n",
3147                         __func__);
3148                 return 0;
3149         }
3150         /* pci_access_mutex lock acquired by sysfs show path */
3151         mutex_lock(&ioc->pci_access_mutex);
3152         if (ioc->pci_error_recovery || ioc->remove_host)
3153                 goto out;
3154
3155         /* allocate upto GPIOVal 36 entries */
3156         sz = offsetof(Mpi2IOUnitPage3_t, GPIOVal) + (sizeof(u16) * 36);
3157         io_unit_pg3 = kzalloc(sz, GFP_KERNEL);
3158         if (!io_unit_pg3) {
3159                 rc = -ENOMEM;
3160                 ioc_err(ioc, "%s: failed allocating memory for iounit_pg3: (%d) bytes\n",
3161                         __func__, sz);
3162                 goto out;
3163         }
3164
3165         if (mpt3sas_config_get_iounit_pg3(ioc, &mpi_reply, io_unit_pg3, sz) !=
3166             0) {
3167                 ioc_err(ioc, "%s: failed reading iounit_pg3\n",
3168                         __func__);
3169                 rc = -EINVAL;
3170                 goto out;
3171         }
3172
3173         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
3174         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
3175                 ioc_err(ioc, "%s: iounit_pg3 failed with ioc_status(0x%04x)\n",
3176                         __func__, ioc_status);
3177                 rc = -EINVAL;
3178                 goto out;
3179         }
3180
3181         if (io_unit_pg3->GPIOCount < 25) {
3182                 ioc_err(ioc, "%s: iounit_pg3->GPIOCount less than 25 entries, detected (%d) entries\n",
3183                         __func__, io_unit_pg3->GPIOCount);
3184                 rc = -EINVAL;
3185                 goto out;
3186         }
3187
3188         /* BRM status is in bit zero of GPIOVal[24] */
3189         backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
3190         rc = snprintf(buf, PAGE_SIZE, "%d\n", (backup_rail_monitor_status & 1));
3191
3192  out:
3193         kfree(io_unit_pg3);
3194         mutex_unlock(&ioc->pci_access_mutex);
3195         return rc;
3196 }
3197 static DEVICE_ATTR_RO(BRM_status);
3198
3199 struct DIAG_BUFFER_START {
3200         __le32  Size;
3201         __le32  DiagVersion;
3202         u8      BufferType;
3203         u8      Reserved[3];
3204         __le32  Reserved1;
3205         __le32  Reserved2;
3206         __le32  Reserved3;
3207 };
3208
3209 /**
3210  * host_trace_buffer_size_show - host buffer size (trace only)
3211  * @cdev: pointer to embedded class device
3212  * @attr: ?
3213  * @buf: the buffer returned
3214  *
3215  * A sysfs 'read-only' shost attribute.
3216  */
3217 static ssize_t
3218 host_trace_buffer_size_show(struct device *cdev,
3219         struct device_attribute *attr, char *buf)
3220 {
3221         struct Scsi_Host *shost = class_to_shost(cdev);
3222         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3223         u32 size = 0;
3224         struct DIAG_BUFFER_START *request_data;
3225
3226         if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
3227                 ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
3228                         __func__);
3229                 return 0;
3230         }
3231
3232         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3233             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
3234                 ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
3235                         __func__);
3236                 return 0;
3237         }
3238
3239         request_data = (struct DIAG_BUFFER_START *)
3240             ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE];
3241         if ((le32_to_cpu(request_data->DiagVersion) == 0x00000000 ||
3242             le32_to_cpu(request_data->DiagVersion) == 0x01000000 ||
3243             le32_to_cpu(request_data->DiagVersion) == 0x01010000) &&
3244             le32_to_cpu(request_data->Reserved3) == 0x4742444c)
3245                 size = le32_to_cpu(request_data->Size);
3246
3247         ioc->ring_buffer_sz = size;
3248         return snprintf(buf, PAGE_SIZE, "%d\n", size);
3249 }
3250 static DEVICE_ATTR_RO(host_trace_buffer_size);
3251
3252 /**
3253  * host_trace_buffer_show - firmware ring buffer (trace only)
3254  * @cdev: pointer to embedded class device
3255  * @attr: ?
3256  * @buf: the buffer returned
3257  *
3258  * A sysfs 'read/write' shost attribute.
3259  *
3260  * You will only be able to read 4k bytes of ring buffer at a time.
3261  * In order to read beyond 4k bytes, you will have to write out the
3262  * offset to the same attribute, it will move the pointer.
3263  */
3264 static ssize_t
3265 host_trace_buffer_show(struct device *cdev, struct device_attribute *attr,
3266         char *buf)
3267 {
3268         struct Scsi_Host *shost = class_to_shost(cdev);
3269         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3270         void *request_data;
3271         u32 size;
3272
3273         if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
3274                 ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
3275                         __func__);
3276                 return 0;
3277         }
3278
3279         if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3280             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
3281                 ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
3282                         __func__);
3283                 return 0;
3284         }
3285
3286         if (ioc->ring_buffer_offset > ioc->ring_buffer_sz)
3287                 return 0;
3288
3289         size = ioc->ring_buffer_sz - ioc->ring_buffer_offset;
3290         size = (size >= PAGE_SIZE) ? (PAGE_SIZE - 1) : size;
3291         request_data = ioc->diag_buffer[0] + ioc->ring_buffer_offset;
3292         memcpy(buf, request_data, size);
3293         return size;
3294 }
3295
3296 static ssize_t
3297 host_trace_buffer_store(struct device *cdev, struct device_attribute *attr,
3298         const char *buf, size_t count)
3299 {
3300         struct Scsi_Host *shost = class_to_shost(cdev);
3301         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3302         int val = 0;
3303
3304         if (sscanf(buf, "%d", &val) != 1)
3305                 return -EINVAL;
3306
3307         ioc->ring_buffer_offset = val;
3308         return strlen(buf);
3309 }
3310 static DEVICE_ATTR_RW(host_trace_buffer);
3311
3312
3313 /*****************************************/
3314
3315 /**
3316  * host_trace_buffer_enable_show - firmware ring buffer (trace only)
3317  * @cdev: pointer to embedded class device
3318  * @attr: ?
3319  * @buf: the buffer returned
3320  *
3321  * A sysfs 'read/write' shost attribute.
3322  *
3323  * This is a mechnism to post/release host_trace_buffers
3324  */
3325 static ssize_t
3326 host_trace_buffer_enable_show(struct device *cdev,
3327         struct device_attribute *attr, char *buf)
3328 {
3329         struct Scsi_Host *shost = class_to_shost(cdev);
3330         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3331
3332         if ((!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) ||
3333            ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3334             MPT3_DIAG_BUFFER_IS_REGISTERED) == 0))
3335                 return snprintf(buf, PAGE_SIZE, "off\n");
3336         else if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3337             MPT3_DIAG_BUFFER_IS_RELEASED))
3338                 return snprintf(buf, PAGE_SIZE, "release\n");
3339         else
3340                 return snprintf(buf, PAGE_SIZE, "post\n");
3341 }
3342
3343 static ssize_t
3344 host_trace_buffer_enable_store(struct device *cdev,
3345         struct device_attribute *attr, const char *buf, size_t count)
3346 {
3347         struct Scsi_Host *shost = class_to_shost(cdev);
3348         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3349         char str[10] = "";
3350         struct mpt3_diag_register diag_register;
3351         u8 issue_reset = 0;
3352
3353         /* don't allow post/release occurr while recovery is active */
3354         if (ioc->shost_recovery || ioc->remove_host ||
3355             ioc->pci_error_recovery || ioc->is_driver_loading)
3356                 return -EBUSY;
3357
3358         if (sscanf(buf, "%9s", str) != 1)
3359                 return -EINVAL;
3360
3361         if (!strcmp(str, "post")) {
3362                 /* exit out if host buffers are already posted */
3363                 if ((ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) &&
3364                     (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3365                     MPT3_DIAG_BUFFER_IS_REGISTERED) &&
3366                     ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3367                     MPT3_DIAG_BUFFER_IS_RELEASED) == 0))
3368                         goto out;
3369                 memset(&diag_register, 0, sizeof(struct mpt3_diag_register));
3370                 ioc_info(ioc, "posting host trace buffers\n");
3371                 diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
3372
3373                 if (ioc->manu_pg11.HostTraceBufferMaxSizeKB != 0 &&
3374                     ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE] != 0) {
3375                         /* post the same buffer allocated previously */
3376                         diag_register.requested_buffer_size =
3377                             ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE];
3378                 } else {
3379                         /*
3380                          * Free the diag buffer memory which was previously
3381                          * allocated by an application.
3382                          */
3383                         if ((ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE] != 0)
3384                             &&
3385                             (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3386                             MPT3_DIAG_BUFFER_IS_APP_OWNED)) {
3387                                 pci_free_consistent(ioc->pdev,
3388                                     ioc->diag_buffer_sz[
3389                                     MPI2_DIAG_BUF_TYPE_TRACE],
3390                                     ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE],
3391                                     ioc->diag_buffer_dma[
3392                                     MPI2_DIAG_BUF_TYPE_TRACE]);
3393                                 ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE] =
3394                                     NULL;
3395                         }
3396
3397                         diag_register.requested_buffer_size = (1024 * 1024);
3398                 }
3399
3400                 diag_register.unique_id =
3401                     (ioc->hba_mpi_version_belonged == MPI2_VERSION) ?
3402                     (MPT2DIAGBUFFUNIQUEID):(MPT3DIAGBUFFUNIQUEID);
3403                 ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] = 0;
3404                 _ctl_diag_register_2(ioc,  &diag_register);
3405                 if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3406                     MPT3_DIAG_BUFFER_IS_REGISTERED) {
3407                         ioc_info(ioc,
3408                             "Trace buffer %d KB allocated through sysfs\n",
3409                             diag_register.requested_buffer_size>>10);
3410                         if (ioc->hba_mpi_version_belonged != MPI2_VERSION)
3411                                 ioc->diag_buffer_status[
3412                                     MPI2_DIAG_BUF_TYPE_TRACE] |=
3413                                     MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED;
3414                 }
3415         } else if (!strcmp(str, "release")) {
3416                 /* exit out if host buffers are already released */
3417                 if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE])
3418                         goto out;
3419                 if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3420                     MPT3_DIAG_BUFFER_IS_REGISTERED) == 0)
3421                         goto out;
3422                 if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
3423                     MPT3_DIAG_BUFFER_IS_RELEASED))
3424                         goto out;
3425                 ioc_info(ioc, "releasing host trace buffer\n");
3426                 mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE,
3427                     &issue_reset);
3428         }
3429
3430  out:
3431         return strlen(buf);
3432 }
3433 static DEVICE_ATTR_RW(host_trace_buffer_enable);
3434
3435 /*********** diagnostic trigger suppport *********************************/
3436
3437 /**
3438  * diag_trigger_master_show - show the diag_trigger_master attribute
3439  * @cdev: pointer to embedded class device
3440  * @attr: ?
3441  * @buf: the buffer returned
3442  *
3443  * A sysfs 'read/write' shost attribute.
3444  */
3445 static ssize_t
3446 diag_trigger_master_show(struct device *cdev,
3447         struct device_attribute *attr, char *buf)
3448
3449 {
3450         struct Scsi_Host *shost = class_to_shost(cdev);
3451         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3452         unsigned long flags;
3453         ssize_t rc;
3454
3455         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3456         rc = sizeof(struct SL_WH_MASTER_TRIGGER_T);
3457         memcpy(buf, &ioc->diag_trigger_master, rc);
3458         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3459         return rc;
3460 }
3461
3462 /**
3463  * diag_trigger_master_store - store the diag_trigger_master attribute
3464  * @cdev: pointer to embedded class device
3465  * @attr: ?
3466  * @buf: the buffer returned
3467  * @count: ?
3468  *
3469  * A sysfs 'read/write' shost attribute.
3470  */
3471 static ssize_t
3472 diag_trigger_master_store(struct device *cdev,
3473         struct device_attribute *attr, const char *buf, size_t count)
3474
3475 {
3476         struct Scsi_Host *shost = class_to_shost(cdev);
3477         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3478         unsigned long flags;
3479         ssize_t rc;
3480
3481         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3482         rc = min(sizeof(struct SL_WH_MASTER_TRIGGER_T), count);
3483         memset(&ioc->diag_trigger_master, 0,
3484             sizeof(struct SL_WH_MASTER_TRIGGER_T));
3485         memcpy(&ioc->diag_trigger_master, buf, rc);
3486         ioc->diag_trigger_master.MasterData |=
3487             (MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
3488         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3489         return rc;
3490 }
3491 static DEVICE_ATTR_RW(diag_trigger_master);
3492
3493
3494 /**
3495  * diag_trigger_event_show - show the diag_trigger_event attribute
3496  * @cdev: pointer to embedded class device
3497  * @attr: ?
3498  * @buf: the buffer returned
3499  *
3500  * A sysfs 'read/write' shost attribute.
3501  */
3502 static ssize_t
3503 diag_trigger_event_show(struct device *cdev,
3504         struct device_attribute *attr, char *buf)
3505 {
3506         struct Scsi_Host *shost = class_to_shost(cdev);
3507         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3508         unsigned long flags;
3509         ssize_t rc;
3510
3511         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3512         rc = sizeof(struct SL_WH_EVENT_TRIGGERS_T);
3513         memcpy(buf, &ioc->diag_trigger_event, rc);
3514         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3515         return rc;
3516 }
3517
3518 /**
3519  * diag_trigger_event_store - store the diag_trigger_event attribute
3520  * @cdev: pointer to embedded class device
3521  * @attr: ?
3522  * @buf: the buffer returned
3523  * @count: ?
3524  *
3525  * A sysfs 'read/write' shost attribute.
3526  */
3527 static ssize_t
3528 diag_trigger_event_store(struct device *cdev,
3529         struct device_attribute *attr, const char *buf, size_t count)
3530
3531 {
3532         struct Scsi_Host *shost = class_to_shost(cdev);
3533         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3534         unsigned long flags;
3535         ssize_t sz;
3536
3537         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3538         sz = min(sizeof(struct SL_WH_EVENT_TRIGGERS_T), count);
3539         memset(&ioc->diag_trigger_event, 0,
3540             sizeof(struct SL_WH_EVENT_TRIGGERS_T));
3541         memcpy(&ioc->diag_trigger_event, buf, sz);
3542         if (ioc->diag_trigger_event.ValidEntries > NUM_VALID_ENTRIES)
3543                 ioc->diag_trigger_event.ValidEntries = NUM_VALID_ENTRIES;
3544         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3545         return sz;
3546 }
3547 static DEVICE_ATTR_RW(diag_trigger_event);
3548
3549
3550 /**
3551  * diag_trigger_scsi_show - show the diag_trigger_scsi attribute
3552  * @cdev: pointer to embedded class device
3553  * @attr: ?
3554  * @buf: the buffer returned
3555  *
3556  * A sysfs 'read/write' shost attribute.
3557  */
3558 static ssize_t
3559 diag_trigger_scsi_show(struct device *cdev,
3560         struct device_attribute *attr, char *buf)
3561 {
3562         struct Scsi_Host *shost = class_to_shost(cdev);
3563         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3564         unsigned long flags;
3565         ssize_t rc;
3566
3567         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3568         rc = sizeof(struct SL_WH_SCSI_TRIGGERS_T);
3569         memcpy(buf, &ioc->diag_trigger_scsi, rc);
3570         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3571         return rc;
3572 }
3573
3574 /**
3575  * diag_trigger_scsi_store - store the diag_trigger_scsi attribute
3576  * @cdev: pointer to embedded class device
3577  * @attr: ?
3578  * @buf: the buffer returned
3579  * @count: ?
3580  *
3581  * A sysfs 'read/write' shost attribute.
3582  */
3583 static ssize_t
3584 diag_trigger_scsi_store(struct device *cdev,
3585         struct device_attribute *attr, const char *buf, size_t count)
3586 {
3587         struct Scsi_Host *shost = class_to_shost(cdev);
3588         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3589         unsigned long flags;
3590         ssize_t sz;
3591
3592         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3593         sz = min(sizeof(ioc->diag_trigger_scsi), count);
3594         memset(&ioc->diag_trigger_scsi, 0, sizeof(ioc->diag_trigger_scsi));
3595         memcpy(&ioc->diag_trigger_scsi, buf, sz);
3596         if (ioc->diag_trigger_scsi.ValidEntries > NUM_VALID_ENTRIES)
3597                 ioc->diag_trigger_scsi.ValidEntries = NUM_VALID_ENTRIES;
3598         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3599         return sz;
3600 }
3601 static DEVICE_ATTR_RW(diag_trigger_scsi);
3602
3603
3604 /**
3605  * diag_trigger_scsi_show - show the diag_trigger_mpi attribute
3606  * @cdev: pointer to embedded class device
3607  * @attr: ?
3608  * @buf: the buffer returned
3609  *
3610  * A sysfs 'read/write' shost attribute.
3611  */
3612 static ssize_t
3613 diag_trigger_mpi_show(struct device *cdev,
3614         struct device_attribute *attr, char *buf)
3615 {
3616         struct Scsi_Host *shost = class_to_shost(cdev);
3617         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3618         unsigned long flags;
3619         ssize_t rc;
3620
3621         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3622         rc = sizeof(struct SL_WH_MPI_TRIGGERS_T);
3623         memcpy(buf, &ioc->diag_trigger_mpi, rc);
3624         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3625         return rc;
3626 }
3627
3628 /**
3629  * diag_trigger_mpi_store - store the diag_trigger_mpi attribute
3630  * @cdev: pointer to embedded class device
3631  * @attr: ?
3632  * @buf: the buffer returned
3633  * @count: ?
3634  *
3635  * A sysfs 'read/write' shost attribute.
3636  */
3637 static ssize_t
3638 diag_trigger_mpi_store(struct device *cdev,
3639         struct device_attribute *attr, const char *buf, size_t count)
3640 {
3641         struct Scsi_Host *shost = class_to_shost(cdev);
3642         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3643         unsigned long flags;
3644         ssize_t sz;
3645
3646         spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
3647         sz = min(sizeof(struct SL_WH_MPI_TRIGGERS_T), count);
3648         memset(&ioc->diag_trigger_mpi, 0,
3649             sizeof(ioc->diag_trigger_mpi));
3650         memcpy(&ioc->diag_trigger_mpi, buf, sz);
3651         if (ioc->diag_trigger_mpi.ValidEntries > NUM_VALID_ENTRIES)
3652                 ioc->diag_trigger_mpi.ValidEntries = NUM_VALID_ENTRIES;
3653         spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
3654         return sz;
3655 }
3656
3657 static DEVICE_ATTR_RW(diag_trigger_mpi);
3658
3659 /*********** diagnostic trigger suppport *** END ****************************/
3660
3661 /*****************************************/
3662
3663 /**
3664  * drv_support_bitmap_show - driver supported feature bitmap
3665  * @cdev: pointer to embedded class device
3666  * @attr: unused
3667  * @buf: the buffer returned
3668  *
3669  * A sysfs 'read-only' shost attribute.
3670  */
3671 static ssize_t
3672 drv_support_bitmap_show(struct device *cdev,
3673         struct device_attribute *attr, char *buf)
3674 {
3675         struct Scsi_Host *shost = class_to_shost(cdev);
3676         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3677
3678         return snprintf(buf, PAGE_SIZE, "0x%08x\n", ioc->drv_support_bitmap);
3679 }
3680 static DEVICE_ATTR_RO(drv_support_bitmap);
3681
3682 /**
3683  * enable_sdev_max_qd_show - display whether sdev max qd is enabled/disabled
3684  * @cdev: pointer to embedded class device
3685  * @attr: unused
3686  * @buf: the buffer returned
3687  *
3688  * A sysfs read/write shost attribute. This attribute is used to set the
3689  * targets queue depth to HBA IO queue depth if this attribute is enabled.
3690  */
3691 static ssize_t
3692 enable_sdev_max_qd_show(struct device *cdev,
3693         struct device_attribute *attr, char *buf)
3694 {
3695         struct Scsi_Host *shost = class_to_shost(cdev);
3696         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3697
3698         return snprintf(buf, PAGE_SIZE, "%d\n", ioc->enable_sdev_max_qd);
3699 }
3700
3701 /**
3702  * enable_sdev_max_qd_store - Enable/disable sdev max qd
3703  * @cdev: pointer to embedded class device
3704  * @attr: unused
3705  * @buf: the buffer returned
3706  * @count: unused
3707  *
3708  * A sysfs read/write shost attribute. This attribute is used to set the
3709  * targets queue depth to HBA IO queue depth if this attribute is enabled.
3710  * If this attribute is disabled then targets will have corresponding default
3711  * queue depth.
3712  */
3713 static ssize_t
3714 enable_sdev_max_qd_store(struct device *cdev,
3715         struct device_attribute *attr, const char *buf, size_t count)
3716 {
3717         struct Scsi_Host *shost = class_to_shost(cdev);
3718         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
3719         struct MPT3SAS_DEVICE *sas_device_priv_data;
3720         struct MPT3SAS_TARGET *sas_target_priv_data;
3721         int val = 0;
3722         struct scsi_device *sdev;
3723         struct _raid_device *raid_device;
3724         int qdepth;
3725
3726         if (kstrtoint(buf, 0, &val) != 0)
3727                 return -EINVAL;
3728
3729         switch (val) {
3730         case 0:
3731                 ioc->enable_sdev_max_qd = 0;
3732                 shost_for_each_device(sdev, ioc->shost) {
3733                         sas_device_priv_data = sdev->hostdata;
3734                         if (!sas_device_priv_data)
3735                                 continue;
3736                         sas_target_priv_data = sas_device_priv_data->sas_target;
3737                         if (!sas_target_priv_data)
3738                                 continue;
3739
3740                         if (sas_target_priv_data->flags &
3741                             MPT_TARGET_FLAGS_VOLUME) {
3742                                 raid_device =
3743                                     mpt3sas_raid_device_find_by_handle(ioc,
3744                                     sas_target_priv_data->handle);
3745
3746                                 switch (raid_device->volume_type) {
3747                                 case MPI2_RAID_VOL_TYPE_RAID0:
3748                                         if (raid_device->device_info &
3749                                             MPI2_SAS_DEVICE_INFO_SSP_TARGET)
3750                                                 qdepth =
3751                                                     MPT3SAS_SAS_QUEUE_DEPTH;
3752                                         else
3753                                                 qdepth =
3754                                                     MPT3SAS_SATA_QUEUE_DEPTH;
3755                                         break;
3756                                 case MPI2_RAID_VOL_TYPE_RAID1E:
3757                                 case MPI2_RAID_VOL_TYPE_RAID1:
3758                                 case MPI2_RAID_VOL_TYPE_RAID10:
3759                                 case MPI2_RAID_VOL_TYPE_UNKNOWN:
3760                                 default:
3761                                         qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
3762                                 }
3763                         } else if (sas_target_priv_data->flags &
3764                             MPT_TARGET_FLAGS_PCIE_DEVICE)
3765                                 qdepth = MPT3SAS_NVME_QUEUE_DEPTH;
3766                         else
3767                                 qdepth = MPT3SAS_SAS_QUEUE_DEPTH;
3768
3769                         mpt3sas_scsih_change_queue_depth(sdev, qdepth);
3770                 }
3771                 break;
3772         case 1:
3773                 ioc->enable_sdev_max_qd = 1;
3774                 shost_for_each_device(sdev, ioc->shost)
3775                         mpt3sas_scsih_change_queue_depth(sdev,
3776                             shost->can_queue);
3777                 break;
3778         default:
3779                 return -EINVAL;
3780         }
3781
3782         return strlen(buf);
3783 }
3784 static DEVICE_ATTR_RW(enable_sdev_max_qd);
3785
3786 struct device_attribute *mpt3sas_host_attrs[] = {
3787         &dev_attr_version_fw,
3788         &dev_attr_version_bios,
3789         &dev_attr_version_mpi,
3790         &dev_attr_version_product,
3791         &dev_attr_version_nvdata_persistent,
3792         &dev_attr_version_nvdata_default,
3793         &dev_attr_board_name,
3794         &dev_attr_board_assembly,
3795         &dev_attr_board_tracer,
3796         &dev_attr_io_delay,
3797         &dev_attr_device_delay,
3798         &dev_attr_logging_level,
3799         &dev_attr_fwfault_debug,
3800         &dev_attr_fw_queue_depth,
3801         &dev_attr_host_sas_address,
3802         &dev_attr_ioc_reset_count,
3803         &dev_attr_host_trace_buffer_size,
3804         &dev_attr_host_trace_buffer,
3805         &dev_attr_host_trace_buffer_enable,
3806         &dev_attr_reply_queue_count,
3807         &dev_attr_diag_trigger_master,
3808         &dev_attr_diag_trigger_event,
3809         &dev_attr_diag_trigger_scsi,
3810         &dev_attr_diag_trigger_mpi,
3811         &dev_attr_drv_support_bitmap,
3812         &dev_attr_BRM_status,
3813         &dev_attr_enable_sdev_max_qd,
3814         NULL,
3815 };
3816
3817 /* device attributes */
3818
3819 /**
3820  * sas_address_show - sas address
3821  * @dev: pointer to embedded class device
3822  * @attr: ?
3823  * @buf: the buffer returned
3824  *
3825  * This is the sas address for the target
3826  *
3827  * A sysfs 'read-only' shost attribute.
3828  */
3829 static ssize_t
3830 sas_address_show(struct device *dev, struct device_attribute *attr,
3831         char *buf)
3832 {
3833         struct scsi_device *sdev = to_scsi_device(dev);
3834         struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
3835
3836         return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
3837             (unsigned long long)sas_device_priv_data->sas_target->sas_address);
3838 }
3839 static DEVICE_ATTR_RO(sas_address);
3840
3841 /**
3842  * sas_device_handle_show - device handle
3843  * @dev: pointer to embedded class device
3844  * @attr: ?
3845  * @buf: the buffer returned
3846  *
3847  * This is the firmware assigned device handle
3848  *
3849  * A sysfs 'read-only' shost attribute.
3850  */
3851 static ssize_t
3852 sas_device_handle_show(struct device *dev, struct device_attribute *attr,
3853         char *buf)
3854 {
3855         struct scsi_device *sdev = to_scsi_device(dev);
3856         struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
3857
3858         return snprintf(buf, PAGE_SIZE, "0x%04x\n",
3859             sas_device_priv_data->sas_target->handle);
3860 }
3861 static DEVICE_ATTR_RO(sas_device_handle);
3862
3863 /**
3864  * sas_ncq_io_prio_show - send prioritized io commands to device
3865  * @dev: pointer to embedded device
3866  * @attr: ?
3867  * @buf: the buffer returned
3868  *
3869  * A sysfs 'read/write' sdev attribute, only works with SATA
3870  */
3871 static ssize_t
3872 sas_ncq_prio_enable_show(struct device *dev,
3873                                  struct device_attribute *attr, char *buf)
3874 {
3875         struct scsi_device *sdev = to_scsi_device(dev);
3876         struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
3877
3878         return snprintf(buf, PAGE_SIZE, "%d\n",
3879                         sas_device_priv_data->ncq_prio_enable);
3880 }
3881
3882 static ssize_t
3883 sas_ncq_prio_enable_store(struct device *dev,
3884                                   struct device_attribute *attr,
3885                                   const char *buf, size_t count)
3886 {
3887         struct scsi_device *sdev = to_scsi_device(dev);
3888         struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
3889         bool ncq_prio_enable = 0;
3890
3891         if (kstrtobool(buf, &ncq_prio_enable))
3892                 return -EINVAL;
3893
3894         if (!scsih_ncq_prio_supp(sdev))
3895                 return -EINVAL;
3896
3897         sas_device_priv_data->ncq_prio_enable = ncq_prio_enable;
3898         return strlen(buf);
3899 }
3900 static DEVICE_ATTR_RW(sas_ncq_prio_enable);
3901
3902 struct device_attribute *mpt3sas_dev_attrs[] = {
3903         &dev_attr_sas_address,
3904         &dev_attr_sas_device_handle,
3905         &dev_attr_sas_ncq_prio_enable,
3906         NULL,
3907 };
3908
3909 /* file operations table for mpt3ctl device */
3910 static const struct file_operations ctl_fops = {
3911         .owner = THIS_MODULE,
3912         .unlocked_ioctl = _ctl_ioctl,
3913         .poll = _ctl_poll,
3914         .fasync = _ctl_fasync,
3915 #ifdef CONFIG_COMPAT
3916         .compat_ioctl = _ctl_ioctl_compat,
3917 #endif
3918 };
3919
3920 /* file operations table for mpt2ctl device */
3921 static const struct file_operations ctl_gen2_fops = {
3922         .owner = THIS_MODULE,
3923         .unlocked_ioctl = _ctl_mpt2_ioctl,
3924         .poll = _ctl_poll,
3925         .fasync = _ctl_fasync,
3926 #ifdef CONFIG_COMPAT
3927         .compat_ioctl = _ctl_mpt2_ioctl_compat,
3928 #endif
3929 };
3930
3931 static struct miscdevice ctl_dev = {
3932         .minor  = MPT3SAS_MINOR,
3933         .name   = MPT3SAS_DEV_NAME,
3934         .fops   = &ctl_fops,
3935 };
3936
3937 static struct miscdevice gen2_ctl_dev = {
3938         .minor  = MPT2SAS_MINOR,
3939         .name   = MPT2SAS_DEV_NAME,
3940         .fops   = &ctl_gen2_fops,
3941 };
3942
3943 /**
3944  * mpt3sas_ctl_init - main entry point for ctl.
3945  * @hbas_to_enumerate: ?
3946  */
3947 void
3948 mpt3sas_ctl_init(ushort hbas_to_enumerate)
3949 {
3950         async_queue = NULL;
3951
3952         /* Don't register mpt3ctl ioctl device if
3953          * hbas_to_enumarate is one.
3954          */
3955         if (hbas_to_enumerate != 1)
3956                 if (misc_register(&ctl_dev) < 0)
3957                         pr_err("%s can't register misc device [minor=%d]\n",
3958                             MPT3SAS_DRIVER_NAME, MPT3SAS_MINOR);
3959
3960         /* Don't register mpt3ctl ioctl device if
3961          * hbas_to_enumarate is two.
3962          */
3963         if (hbas_to_enumerate != 2)
3964                 if (misc_register(&gen2_ctl_dev) < 0)
3965                         pr_err("%s can't register misc device [minor=%d]\n",
3966                             MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
3967
3968         init_waitqueue_head(&ctl_poll_wait);
3969 }
3970
3971 /**
3972  * mpt3sas_ctl_exit - exit point for ctl
3973  * @hbas_to_enumerate: ?
3974  */
3975 void
3976 mpt3sas_ctl_exit(ushort hbas_to_enumerate)
3977 {
3978         struct MPT3SAS_ADAPTER *ioc;
3979         int i;
3980
3981         list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
3982
3983                 /* free memory associated to diag buffers */
3984                 for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
3985                         if (!ioc->diag_buffer[i])
3986                                 continue;
3987                         dma_free_coherent(&ioc->pdev->dev,
3988                                           ioc->diag_buffer_sz[i],
3989                                           ioc->diag_buffer[i],
3990                                           ioc->diag_buffer_dma[i]);
3991                         ioc->diag_buffer[i] = NULL;
3992                         ioc->diag_buffer_status[i] = 0;
3993                 }
3994
3995                 kfree(ioc->event_log);
3996         }
3997         if (hbas_to_enumerate != 1)
3998                 misc_deregister(&ctl_dev);
3999         if (hbas_to_enumerate != 2)
4000                 misc_deregister(&gen2_ctl_dev);
4001 }