drivers/media/dvb-frontends/or51211.c

   1 /*
   2  *    Support for OR51211 (pcHDTV HD-2000) - VSB
   3  *
   4  *    Copyright (C) 2005 Kirk Lapray <[email protected]>
   5  *
   6  *    Based on code from Jack Kelliher ([email protected])
   7  *                           Copyright (C) 2002 & pcHDTV, inc.
   8  *
   9  *    This program is free software; you can redistribute it and/or modify
  10  *    it under the terms of the GNU General Public License as published by
  11  *    the Free Software Foundation; either version 2 of the License, or
  12  *    (at your option) any later version.
  13  *
  14  *    This program is distributed in the hope that it will be useful,
  15  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *    GNU General Public License for more details.
  18  *
  19  *    You should have received a copy of the GNU General Public License
  20  *    along with this program; if not, write to the Free Software
  21  *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  22  *
  23 */
  24
  25 #define pr_fmt(fmt)     KBUILD_MODNAME ": %s: " fmt, __func__
  26
  27 /*
  28  * This driver needs external firmware. Please use the command
  29  * "<kerneldir>/Documentation/dvb/get_dvb_firmware or51211" to
  30  * download/extract it, and then copy it to /usr/lib/hotplug/firmware
  31  * or /lib/firmware (depending on configuration of firmware hotplug).
  32  */
  33 #define OR51211_DEFAULT_FIRMWARE "dvb-fe-or51211.fw"
  34
  35 #include <linux/kernel.h>
  36 #include <linux/module.h>
  37 #include <linux/device.h>
  38 #include <linux/firmware.h>
  39 #include <linux/string.h>
  40 #include <linux/slab.h>
  41 #include <asm/byteorder.h>
  42
  43 #include "dvb_math.h"
  44 #include "dvb_frontend.h"
  45 #include "or51211.h"
  46
  47 static int debug;
  48 #define dprintk(args...) \
  49         do { if (debug) pr_debug(args); } while (0)
  50
  51 static u8 run_buf[] = {0x7f,0x01};
  52 static u8 cmd_buf[] = {0x04,0x01,0x50,0x80,0x06}; // ATSC
  53
  54 struct or51211_state {
  55
  56         struct i2c_adapter* i2c;
  57
  58         /* Configuration settings */
  59         const struct or51211_config* config;
  60
  61         struct dvb_frontend frontend;
  62         struct bt878* bt;
  63
  64         /* Demodulator private data */
  65         u8 initialized:1;
  66         u32 snr; /* Result of last SNR claculation */
  67
  68         /* Tuner private data */
  69         u32 current_frequency;
  70 };
  71
  72 static int i2c_writebytes (struct or51211_state* state, u8 reg, const u8 *buf,
  73                            int len)
  74 {
  75         int err;
  76         struct i2c_msg msg;
  77         msg.addr        = reg;
  78         msg.flags       = 0;
  79         msg.len         = len;
  80         msg.buf         = (u8 *)buf;
  81
  82         if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
  83                 pr_warn("error (addr %02x, err == %i)\n", reg, err);
  84                 return -EREMOTEIO;
  85         }
  86
  87         return 0;
  88 }
  89
  90 static int i2c_readbytes(struct or51211_state *state, u8 reg, u8 *buf, int len)
  91 {
  92         int err;
  93         struct i2c_msg msg;
  94         msg.addr        = reg;
  95         msg.flags       = I2C_M_RD;
  96         msg.len         = len;
  97         msg.buf         = buf;
  98
  99         if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
 100                 pr_warn("error (addr %02x, err == %i)\n", reg, err);
 101                 return -EREMOTEIO;
 102         }
 103
 104         return 0;
 105 }
 106
 107 static int or51211_load_firmware (struct dvb_frontend* fe,
 108                                   const struct firmware *fw)
 109 {
 110         struct or51211_state* state = fe->demodulator_priv;
 111         u8 tudata[585];
 112         int i;
 113
 114         dprintk("Firmware is %zu bytes\n", fw->size);
 115
 116         /* Get eprom data */
 117         tudata[0] = 17;
 118         if (i2c_writebytes(state,0x50,tudata,1)) {
 119                 pr_warn("error eprom addr\n");
 120                 return -1;
 121         }
 122         if (i2c_readbytes(state,0x50,&tudata[145],192)) {
 123                 pr_warn("error eprom\n");
 124                 return -1;
 125         }
 126
 127         /* Create firmware buffer */
 128         for (i = 0; i < 145; i++)
 129                 tudata[i] = fw->data[i];
 130
 131         for (i = 0; i < 248; i++)
 132                 tudata[i+337] = fw->data[145+i];
 133
 134         state->config->reset(fe);
 135
 136         if (i2c_writebytes(state,state->config->demod_address,tudata,585)) {
 137                 pr_warn("error 1\n");
 138                 return -1;
 139         }
 140         msleep(1);
 141
 142         if (i2c_writebytes(state,state->config->demod_address,
 143                            &fw->data[393],8125)) {
 144                 pr_warn("error 2\n");
 145                 return -1;
 146         }
 147         msleep(1);
 148
 149         if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
 150                 pr_warn("error 3\n");
 151                 return -1;
 152         }
 153
 154         /* Wait at least 5 msec */
 155         msleep(10);
 156         if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
 157                 pr_warn("error 4\n");
 158                 return -1;
 159         }
 160         msleep(10);
 161
 162         pr_info("Done.\n");
 163         return 0;
 164 };
 165
 166 static int or51211_setmode(struct dvb_frontend* fe, int mode)
 167 {
 168         struct or51211_state* state = fe->demodulator_priv;
 169         u8 rec_buf[14];
 170
 171         state->config->setmode(fe, mode);
 172
 173         if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
 174                 pr_warn("error 1\n");
 175                 return -1;
 176         }
 177
 178         /* Wait at least 5 msec */
 179         msleep(10);
 180         if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
 181                 pr_warn("error 2\n");
 182                 return -1;
 183         }
 184
 185         msleep(10);
 186
 187         /* Set operation mode in Receiver 1 register;
 188          * type 1:
 189          * data 0x50h  Automatic sets receiver channel conditions
 190          *             Automatic NTSC rejection filter
 191          *             Enable  MPEG serial data output
 192          *             MPEG2tr
 193          *             High tuner phase noise
 194          *             normal +/-150kHz Carrier acquisition range
 195          */
 196         if (i2c_writebytes(state,state->config->demod_address,cmd_buf,3)) {
 197                 pr_warn("error 3\n");
 198                 return -1;
 199         }
 200
 201         rec_buf[0] = 0x04;
 202         rec_buf[1] = 0x00;
 203         rec_buf[2] = 0x03;
 204         rec_buf[3] = 0x00;
 205         msleep(20);
 206         if (i2c_writebytes(state,state->config->demod_address,rec_buf,3)) {
 207                 pr_warn("error 5\n");
 208         }
 209         msleep(3);
 210         if (i2c_readbytes(state,state->config->demod_address,&rec_buf[10],2)) {
 211                 pr_warn("error 6\n");
 212                 return -1;
 213         }
 214         dprintk("rec status %02x %02x\n", rec_buf[10], rec_buf[11]);
 215
 216         return 0;
 217 }
 218
 219 static int or51211_set_parameters(struct dvb_frontend *fe)
 220 {
 221         struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 222         struct or51211_state* state = fe->demodulator_priv;
 223
 224         /* Change only if we are actually changing the channel */
 225         if (state->current_frequency != p->frequency) {
 226                 if (fe->ops.tuner_ops.set_params) {
 227                         fe->ops.tuner_ops.set_params(fe);
 228                         if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
 229                 }
 230
 231                 /* Set to ATSC mode */
 232                 or51211_setmode(fe,0);
 233
 234                 /* Update current frequency */
 235                 state->current_frequency = p->frequency;
 236         }
 237         return 0;
 238 }
 239
 240 static int or51211_read_status(struct dvb_frontend *fe, enum fe_status *status)
 241 {
 242         struct or51211_state* state = fe->demodulator_priv;
 243         unsigned char rec_buf[2];
 244         unsigned char snd_buf[] = {0x04,0x00,0x03,0x00};
 245         *status = 0;
 246
 247         /* Receiver Status */
 248         if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
 249                 pr_warn("write error\n");
 250                 return -1;
 251         }
 252         msleep(3);
 253         if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
 254                 pr_warn("read error\n");
 255                 return -1;
 256         }
 257         dprintk("%x %x\n", rec_buf[0], rec_buf[1]);
 258
 259         if (rec_buf[0] &  0x01) { /* Receiver Lock */
 260                 *status |= FE_HAS_SIGNAL;
 261                 *status |= FE_HAS_CARRIER;
 262                 *status |= FE_HAS_VITERBI;
 263                 *status |= FE_HAS_SYNC;
 264                 *status |= FE_HAS_LOCK;
 265         }
 266         return 0;
 267 }
 268
 269 /* Calculate SNR estimation (scaled by 2^24)
 270
 271    8-VSB SNR equation from Oren datasheets
 272
 273    For 8-VSB:
 274      SNR[dB] = 10 * log10(219037.9454 / MSE^2 )
 275
 276    We re-write the snr equation as:
 277      SNR * 2^24 = 10*(c - 2*intlog10(MSE))
 278    Where for 8-VSB, c = log10(219037.9454) * 2^24 */
 279
 280 static u32 calculate_snr(u32 mse, u32 c)
 281 {
 282         if (mse == 0) /* No signal */
 283                 return 0;
 284
 285         mse = 2*intlog10(mse);
 286         if (mse > c) {
 287                 /* Negative SNR, which is possible, but realisticly the
 288                 demod will lose lock before the signal gets this bad.  The
 289                 API only allows for unsigned values, so just return 0 */
 290                 return 0;
 291         }
 292         return 10*(c - mse);
 293 }
 294
 295 static int or51211_read_snr(struct dvb_frontend* fe, u16* snr)
 296 {
 297         struct or51211_state* state = fe->demodulator_priv;
 298         u8 rec_buf[2];
 299         u8 snd_buf[3];
 300
 301         /* SNR after Equalizer */
 302         snd_buf[0] = 0x04;
 303         snd_buf[1] = 0x00;
 304         snd_buf[2] = 0x04;
 305
 306         if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
 307                 pr_warn("error writing snr reg\n");
 308                 return -1;
 309         }
 310         if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
 311                 pr_warn("read_status read error\n");
 312                 return -1;
 313         }
 314
 315         state->snr = calculate_snr(rec_buf[0], 89599047);
 316         *snr = (state->snr) >> 16;
 317
 318         dprintk("noise = 0x%02x, snr = %d.%02d dB\n", rec_buf[0],
 319                 state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
 320
 321         return 0;
 322 }
 323
 324 static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 325 {
 326         /* Calculate Strength from SNR up to 35dB */
 327         /* Even though the SNR can go higher than 35dB, there is some comfort */
 328         /* factor in having a range of strong signals that can show at 100%   */
 329         struct or51211_state* state = (struct or51211_state*)fe->demodulator_priv;
 330         u16 snr;
 331         int ret;
 332
 333         ret = fe->ops.read_snr(fe, &snr);
 334         if (ret != 0)
 335                 return ret;
 336         /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
 337         /* scale the range 0 - 35*2^24 into 0 - 65535 */
 338         if (state->snr >= 8960 * 0x10000)
 339                 *strength = 0xffff;
 340         else
 341                 *strength = state->snr / 8960;
 342
 343         return 0;
 344 }
 345
 346 static int or51211_read_ber(struct dvb_frontend* fe, u32* ber)
 347 {
 348         *ber = -ENOSYS;
 349         return 0;
 350 }
 351
 352 static int or51211_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 353 {
 354         *ucblocks = -ENOSYS;
 355         return 0;
 356 }
 357
 358 static int or51211_sleep(struct dvb_frontend* fe)
 359 {
 360         return 0;
 361 }
 362
 363 static int or51211_init(struct dvb_frontend* fe)
 364 {
 365         struct or51211_state* state = fe->demodulator_priv;
 366         const struct or51211_config* config = state->config;
 367         const struct firmware* fw;
 368         unsigned char get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00};
 369         unsigned char rec_buf[14];
 370         int ret,i;
 371
 372         if (!state->initialized) {
 373                 /* Request the firmware, this will block until it uploads */
 374                 pr_info("Waiting for firmware upload (%s)...\n",
 375                         OR51211_DEFAULT_FIRMWARE);
 376                 ret = config->request_firmware(fe, &fw,
 377                                                OR51211_DEFAULT_FIRMWARE);
 378                 pr_info("Got Hotplug firmware\n");
 379                 if (ret) {
 380                         pr_warn("No firmware uploaded "
 381                                 "(timeout or file not found?)\n");
 382                         return ret;
 383                 }
 384
 385                 ret = or51211_load_firmware(fe, fw);
 386                 release_firmware(fw);
 387                 if (ret) {
 388                         pr_warn("Writing firmware to device failed!\n");
 389                         return ret;
 390                 }
 391                 pr_info("Firmware upload complete.\n");
 392
 393                 /* Set operation mode in Receiver 1 register;
 394                  * type 1:
 395                  * data 0x50h  Automatic sets receiver channel conditions
 396                  *             Automatic NTSC rejection filter
 397                  *             Enable  MPEG serial data output
 398                  *             MPEG2tr
 399                  *             High tuner phase noise
 400                  *             normal +/-150kHz Carrier acquisition range
 401                  */
 402                 if (i2c_writebytes(state,state->config->demod_address,
 403                                    cmd_buf,3)) {
 404                         pr_warn("Load DVR Error 5\n");
 405                         return -1;
 406                 }
 407
 408                 /* Read back ucode version to besure we loaded correctly */
 409                 /* and are really up and running */
 410                 rec_buf[0] = 0x04;
 411                 rec_buf[1] = 0x00;
 412                 rec_buf[2] = 0x03;
 413                 rec_buf[3] = 0x00;
 414                 msleep(30);
 415                 if (i2c_writebytes(state,state->config->demod_address,
 416                                    rec_buf,3)) {
 417                         pr_warn("Load DVR Error A\n");
 418                         return -1;
 419                 }
 420                 msleep(3);
 421                 if (i2c_readbytes(state,state->config->demod_address,
 422                                   &rec_buf[10],2)) {
 423                         pr_warn("Load DVR Error B\n");
 424                         return -1;
 425                 }
 426
 427                 rec_buf[0] = 0x04;
 428                 rec_buf[1] = 0x00;
 429                 rec_buf[2] = 0x01;
 430                 rec_buf[3] = 0x00;
 431                 msleep(20);
 432                 if (i2c_writebytes(state,state->config->demod_address,
 433                                    rec_buf,3)) {
 434                         pr_warn("Load DVR Error C\n");
 435                         return -1;
 436                 }
 437                 msleep(3);
 438                 if (i2c_readbytes(state,state->config->demod_address,
 439                                   &rec_buf[12],2)) {
 440                         pr_warn("Load DVR Error D\n");
 441                         return -1;
 442                 }
 443
 444                 for (i = 0; i < 8; i++)
 445                         rec_buf[i]=0xed;
 446
 447                 for (i = 0; i < 5; i++) {
 448                         msleep(30);
 449                         get_ver_buf[4] = i+1;
 450                         if (i2c_writebytes(state,state->config->demod_address,
 451                                            get_ver_buf,5)) {
 452                                 pr_warn("Load DVR Error 6 - %d\n", i);
 453                                 return -1;
 454                         }
 455                         msleep(3);
 456
 457                         if (i2c_readbytes(state,state->config->demod_address,
 458                                           &rec_buf[i*2],2)) {
 459                                 pr_warn("Load DVR Error 7 - %d\n", i);
 460                                 return -1;
 461                         }
 462                         /* If we didn't receive the right index, try again */
 463                         if ((int)rec_buf[i*2+1]!=i+1){
 464                           i--;
 465                         }
 466                 }
 467                 dprintk("read_fwbits %10ph\n", rec_buf);
 468
 469                 pr_info("ver TU%02x%02x%02x VSB mode %02x Status %02x\n",
 470                         rec_buf[2], rec_buf[4], rec_buf[6], rec_buf[12],
 471                         rec_buf[10]);
 472
 473                 rec_buf[0] = 0x04;
 474                 rec_buf[1] = 0x00;
 475                 rec_buf[2] = 0x03;
 476                 rec_buf[3] = 0x00;
 477                 msleep(20);
 478                 if (i2c_writebytes(state,state->config->demod_address,
 479                                    rec_buf,3)) {
 480                         pr_warn("Load DVR Error 8\n");
 481                         return -1;
 482                 }
 483                 msleep(20);
 484                 if (i2c_readbytes(state,state->config->demod_address,
 485                                   &rec_buf[8],2)) {
 486                         pr_warn("Load DVR Error 9\n");
 487                         return -1;
 488                 }
 489                 state->initialized = 1;
 490         }
 491
 492         return 0;
 493 }
 494
 495 static int or51211_get_tune_settings(struct dvb_frontend* fe,
 496                                      struct dvb_frontend_tune_settings* fesettings)
 497 {
 498         fesettings->min_delay_ms = 500;
 499         fesettings->step_size = 0;
 500         fesettings->max_drift = 0;
 501         return 0;
 502 }
 503
 504 static void or51211_release(struct dvb_frontend* fe)
 505 {
 506         struct or51211_state* state = fe->demodulator_priv;
 507         state->config->sleep(fe);
 508         kfree(state);
 509 }
 510
 511 static struct dvb_frontend_ops or51211_ops;
 512
 513 struct dvb_frontend* or51211_attach(const struct or51211_config* config,
 514                                     struct i2c_adapter* i2c)
 515 {
 516         struct or51211_state* state = NULL;
 517
 518         /* Allocate memory for the internal state */
 519         state = kzalloc(sizeof(struct or51211_state), GFP_KERNEL);
 520         if (state == NULL)
 521                 return NULL;
 522
 523         /* Setup the state */
 524         state->config = config;
 525         state->i2c = i2c;
 526         state->initialized = 0;
 527         state->current_frequency = 0;
 528
 529         /* Create dvb_frontend */
 530         memcpy(&state->frontend.ops, &or51211_ops, sizeof(struct dvb_frontend_ops));
 531         state->frontend.demodulator_priv = state;
 532         return &state->frontend;
 533 }
 534
 535 static struct dvb_frontend_ops or51211_ops = {
 536         .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
 537         .info = {
 538                 .name               = "Oren OR51211 VSB Frontend",
 539                 .frequency_min      = 44000000,
 540                 .frequency_max      = 958000000,
 541                 .frequency_stepsize = 166666,
 542                 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
 543                         FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
 544                         FE_CAN_8VSB
 545         },
 546
 547         .release = or51211_release,
 548
 549         .init = or51211_init,
 550         .sleep = or51211_sleep,
 551
 552         .set_frontend = or51211_set_parameters,
 553         .get_tune_settings = or51211_get_tune_settings,
 554
 555         .read_status = or51211_read_status,
 556         .read_ber = or51211_read_ber,
 557         .read_signal_strength = or51211_read_signal_strength,
 558         .read_snr = or51211_read_snr,
 559         .read_ucblocks = or51211_read_ucblocks,
 560 };
 561
 562 module_param(debug, int, 0644);
 563 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
 564
 565 MODULE_DESCRIPTION("Oren OR51211 VSB [pcHDTV HD-2000] Demodulator Driver");
 566 MODULE_AUTHOR("Kirk Lapray");
 567 MODULE_LICENSE("GPL");
 568
 569 EXPORT_SYMBOL(or51211_attach);
 570