drivers/acpi/acpi_lpss.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * ACPI support for Intel Lynxpoint LPSS.
   4  *
   5  * Copyright (C) 2013, Intel Corporation
   6  * Authors: Mika Westerberg <[email protected]>
   7  *          Rafael J. Wysocki <[email protected]>
   8  */
   9
  10 #include <linux/acpi.h>
  11 #include <linux/clkdev.h>
  12 #include <linux/clk-provider.h>
  13 #include <linux/err.h>
  14 #include <linux/io.h>
  15 #include <linux/mutex.h>
  16 #include <linux/pci.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/platform_data/x86/clk-lpss.h>
  19 #include <linux/platform_data/x86/pmc_atom.h>
  20 #include <linux/pm_domain.h>
  21 #include <linux/pm_runtime.h>
  22 #include <linux/pwm.h>
  23 #include <linux/suspend.h>
  24 #include <linux/delay.h>
  25
  26 #include "internal.h"
  27
  28 ACPI_MODULE_NAME("acpi_lpss");
  29
  30 #ifdef CONFIG_X86_INTEL_LPSS
  31
  32 #include <asm/cpu_device_id.h>
  33 #include <asm/intel-family.h>
  34 #include <asm/iosf_mbi.h>
  35
  36 #define LPSS_ADDR(desc) ((unsigned long)&desc)
  37
  38 #define LPSS_CLK_SIZE   0x04
  39 #define LPSS_LTR_SIZE   0x18
  40
  41 /* Offsets relative to LPSS_PRIVATE_OFFSET */
  42 #define LPSS_CLK_DIVIDER_DEF_MASK       (BIT(1) | BIT(16))
  43 #define LPSS_RESETS                     0x04
  44 #define LPSS_RESETS_RESET_FUNC          BIT(0)
  45 #define LPSS_RESETS_RESET_APB           BIT(1)
  46 #define LPSS_GENERAL                    0x08
  47 #define LPSS_GENERAL_LTR_MODE_SW        BIT(2)
  48 #define LPSS_GENERAL_UART_RTS_OVRD      BIT(3)
  49 #define LPSS_SW_LTR                     0x10
  50 #define LPSS_AUTO_LTR                   0x14
  51 #define LPSS_LTR_SNOOP_REQ              BIT(15)
  52 #define LPSS_LTR_SNOOP_MASK             0x0000FFFF
  53 #define LPSS_LTR_SNOOP_LAT_1US          0x800
  54 #define LPSS_LTR_SNOOP_LAT_32US         0xC00
  55 #define LPSS_LTR_SNOOP_LAT_SHIFT        5
  56 #define LPSS_LTR_SNOOP_LAT_CUTOFF       3000
  57 #define LPSS_LTR_MAX_VAL                0x3FF
  58 #define LPSS_TX_INT                     0x20
  59 #define LPSS_TX_INT_MASK                BIT(1)
  60
  61 #define LPSS_PRV_REG_COUNT              9
  62
  63 /* LPSS Flags */
  64 #define LPSS_CLK                        BIT(0)
  65 #define LPSS_CLK_GATE                   BIT(1)
  66 #define LPSS_CLK_DIVIDER                BIT(2)
  67 #define LPSS_LTR                        BIT(3)
  68 #define LPSS_SAVE_CTX                   BIT(4)
  69 #define LPSS_NO_D3_DELAY                BIT(5)
  70
  71 /* Crystal Cove PMIC shares same ACPI ID between different platforms */
  72 #define BYT_CRC_HRV                     2
  73 #define CHT_CRC_HRV                     3
  74
  75 struct lpss_private_data;
  76
  77 struct lpss_device_desc {
  78         unsigned int flags;
  79         const char *clk_con_id;
  80         unsigned int prv_offset;
  81         size_t prv_size_override;
  82         struct property_entry *properties;
  83         void (*setup)(struct lpss_private_data *pdata);
  84         bool resume_from_noirq;
  85 };
  86
  87 static const struct lpss_device_desc lpss_dma_desc = {
  88         .flags = LPSS_CLK,
  89 };
  90
  91 struct lpss_private_data {
  92         struct acpi_device *adev;
  93         void __iomem *mmio_base;
  94         resource_size_t mmio_size;
  95         unsigned int fixed_clk_rate;
  96         struct clk *clk;
  97         const struct lpss_device_desc *dev_desc;
  98         u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
  99 };
 100
 101 /* Devices which need to be in D3 before lpss_iosf_enter_d3_state() proceeds */
 102 static u32 pmc_atom_d3_mask = 0xfe000ffe;
 103
 104 /* LPSS run time quirks */
 105 static unsigned int lpss_quirks;
 106
 107 /*
 108  * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
 109  *
 110  * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
 111  * it can be powered off automatically whenever the last LPSS device goes down.
 112  * In case of no power any access to the DMA controller will hang the system.
 113  * The behaviour is reproduced on some HP laptops based on Intel BayTrail as
 114  * well as on ASuS T100TA transformer.
 115  *
 116  * This quirk overrides power state of entire LPSS island to keep DMA powered
 117  * on whenever we have at least one other device in use.
 118  */
 119 #define LPSS_QUIRK_ALWAYS_POWER_ON      BIT(0)
 120
 121 /* UART Component Parameter Register */
 122 #define LPSS_UART_CPR                   0xF4
 123 #define LPSS_UART_CPR_AFCE              BIT(4)
 124
 125 static void lpss_uart_setup(struct lpss_private_data *pdata)
 126 {
 127         unsigned int offset;
 128         u32 val;
 129
 130         offset = pdata->dev_desc->prv_offset + LPSS_TX_INT;
 131         val = readl(pdata->mmio_base + offset);
 132         writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset);
 133
 134         val = readl(pdata->mmio_base + LPSS_UART_CPR);
 135         if (!(val & LPSS_UART_CPR_AFCE)) {
 136                 offset = pdata->dev_desc->prv_offset + LPSS_GENERAL;
 137                 val = readl(pdata->mmio_base + offset);
 138                 val |= LPSS_GENERAL_UART_RTS_OVRD;
 139                 writel(val, pdata->mmio_base + offset);
 140         }
 141 }
 142
 143 static void lpss_deassert_reset(struct lpss_private_data *pdata)
 144 {
 145         unsigned int offset;
 146         u32 val;
 147
 148         offset = pdata->dev_desc->prv_offset + LPSS_RESETS;
 149         val = readl(pdata->mmio_base + offset);
 150         val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC;
 151         writel(val, pdata->mmio_base + offset);
 152 }
 153
 154 /*
 155  * BYT PWM used for backlight control by the i915 driver on systems without
 156  * the Crystal Cove PMIC.
 157  */
 158 static struct pwm_lookup byt_pwm_lookup[] = {
 159         PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0",
 160                                "pwm_backlight", 0, PWM_POLARITY_NORMAL,
 161                                "pwm-lpss-platform"),
 162 };
 163
 164 static void byt_pwm_setup(struct lpss_private_data *pdata)
 165 {
 166         struct acpi_device *adev = pdata->adev;
 167
 168         /* Only call pwm_add_table for the first PWM controller */
 169         if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
 170                 return;
 171
 172         if (!acpi_dev_present("INT33FD", NULL, BYT_CRC_HRV))
 173                 pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup));
 174 }
 175
 176 #define LPSS_I2C_ENABLE                 0x6c
 177
 178 static void byt_i2c_setup(struct lpss_private_data *pdata)
 179 {
 180         const char *uid_str = acpi_device_uid(pdata->adev);
 181         acpi_handle handle = pdata->adev->handle;
 182         unsigned long long shared_host = 0;
 183         acpi_status status;
 184         long uid = 0;
 185
 186         /* Expected to always be true, but better safe then sorry */
 187         if (uid_str)
 188                 uid = simple_strtol(uid_str, NULL, 10);
 189
 190         /* Detect I2C bus shared with PUNIT and ignore its d3 status */
 191         status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
 192         if (ACPI_SUCCESS(status) && shared_host && uid)
 193                 pmc_atom_d3_mask &= ~(BIT_LPSS2_F1_I2C1 << (uid - 1));
 194
 195         lpss_deassert_reset(pdata);
 196
 197         if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset))
 198                 pdata->fixed_clk_rate = 133000000;
 199
 200         writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
 201 }
 202
 203 /* BSW PWM used for backlight control by the i915 driver */
 204 static struct pwm_lookup bsw_pwm_lookup[] = {
 205         PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0",
 206                                "pwm_backlight", 0, PWM_POLARITY_NORMAL,
 207                                "pwm-lpss-platform"),
 208 };
 209
 210 static void bsw_pwm_setup(struct lpss_private_data *pdata)
 211 {
 212         struct acpi_device *adev = pdata->adev;
 213
 214         /* Only call pwm_add_table for the first PWM controller */
 215         if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
 216                 return;
 217
 218         pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup));
 219 }
 220
 221 static const struct lpss_device_desc lpt_dev_desc = {
 222         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR
 223                         | LPSS_SAVE_CTX,
 224         .prv_offset = 0x800,
 225 };
 226
 227 static const struct lpss_device_desc lpt_i2c_dev_desc = {
 228         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR | LPSS_SAVE_CTX,
 229         .prv_offset = 0x800,
 230 };
 231
 232 static struct property_entry uart_properties[] = {
 233         PROPERTY_ENTRY_U32("reg-io-width", 4),
 234         PROPERTY_ENTRY_U32("reg-shift", 2),
 235         PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
 236         { },
 237 };
 238
 239 static const struct lpss_device_desc lpt_uart_dev_desc = {
 240         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR
 241                         | LPSS_SAVE_CTX,
 242         .clk_con_id = "baudclk",
 243         .prv_offset = 0x800,
 244         .setup = lpss_uart_setup,
 245         .properties = uart_properties,
 246 };
 247
 248 static const struct lpss_device_desc lpt_sdio_dev_desc = {
 249         .flags = LPSS_LTR,
 250         .prv_offset = 0x1000,
 251         .prv_size_override = 0x1018,
 252 };
 253
 254 static const struct lpss_device_desc byt_pwm_dev_desc = {
 255         .flags = LPSS_SAVE_CTX,
 256         .prv_offset = 0x800,
 257         .setup = byt_pwm_setup,
 258 };
 259
 260 static const struct lpss_device_desc bsw_pwm_dev_desc = {
 261         .flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
 262         .prv_offset = 0x800,
 263         .setup = bsw_pwm_setup,
 264 };
 265
 266 static const struct lpss_device_desc byt_uart_dev_desc = {
 267         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
 268         .clk_con_id = "baudclk",
 269         .prv_offset = 0x800,
 270         .setup = lpss_uart_setup,
 271         .properties = uart_properties,
 272 };
 273
 274 static const struct lpss_device_desc bsw_uart_dev_desc = {
 275         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
 276                         | LPSS_NO_D3_DELAY,
 277         .clk_con_id = "baudclk",
 278         .prv_offset = 0x800,
 279         .setup = lpss_uart_setup,
 280         .properties = uart_properties,
 281 };
 282
 283 static const struct lpss_device_desc byt_spi_dev_desc = {
 284         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
 285         .prv_offset = 0x400,
 286 };
 287
 288 static const struct lpss_device_desc byt_sdio_dev_desc = {
 289         .flags = LPSS_CLK,
 290 };
 291
 292 static const struct lpss_device_desc byt_i2c_dev_desc = {
 293         .flags = LPSS_CLK | LPSS_SAVE_CTX,
 294         .prv_offset = 0x800,
 295         .setup = byt_i2c_setup,
 296         .resume_from_noirq = true,
 297 };
 298
 299 static const struct lpss_device_desc bsw_i2c_dev_desc = {
 300         .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
 301         .prv_offset = 0x800,
 302         .setup = byt_i2c_setup,
 303         .resume_from_noirq = true,
 304 };
 305
 306 static const struct lpss_device_desc bsw_spi_dev_desc = {
 307         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
 308                         | LPSS_NO_D3_DELAY,
 309         .prv_offset = 0x400,
 310         .setup = lpss_deassert_reset,
 311 };
 312
 313 #define ICPU(model)     { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
 314
 315 static const struct x86_cpu_id lpss_cpu_ids[] = {
 316         ICPU(INTEL_FAM6_ATOM_SILVERMONT),       /* Valleyview, Bay Trail */
 317         ICPU(INTEL_FAM6_ATOM_AIRMONT),  /* Braswell, Cherry Trail */
 318         {}
 319 };
 320
 321 #else
 322
 323 #define LPSS_ADDR(desc) (0UL)
 324
 325 #endif /* CONFIG_X86_INTEL_LPSS */
 326
 327 static const struct acpi_device_id acpi_lpss_device_ids[] = {
 328         /* Generic LPSS devices */
 329         { "INTL9C60", LPSS_ADDR(lpss_dma_desc) },
 330
 331         /* Lynxpoint LPSS devices */
 332         { "INT33C0", LPSS_ADDR(lpt_dev_desc) },
 333         { "INT33C1", LPSS_ADDR(lpt_dev_desc) },
 334         { "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) },
 335         { "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) },
 336         { "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) },
 337         { "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) },
 338         { "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) },
 339         { "INT33C7", },
 340
 341         /* BayTrail LPSS devices */
 342         { "80860F09", LPSS_ADDR(byt_pwm_dev_desc) },
 343         { "80860F0A", LPSS_ADDR(byt_uart_dev_desc) },
 344         { "80860F0E", LPSS_ADDR(byt_spi_dev_desc) },
 345         { "80860F14", LPSS_ADDR(byt_sdio_dev_desc) },
 346         { "80860F41", LPSS_ADDR(byt_i2c_dev_desc) },
 347         { "INT33B2", },
 348         { "INT33FC", },
 349
 350         /* Braswell LPSS devices */
 351         { "80862286", LPSS_ADDR(lpss_dma_desc) },
 352         { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
 353         { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
 354         { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
 355         { "808622C0", LPSS_ADDR(lpss_dma_desc) },
 356         { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
 357
 358         /* Broadwell LPSS devices */
 359         { "INT3430", LPSS_ADDR(lpt_dev_desc) },
 360         { "INT3431", LPSS_ADDR(lpt_dev_desc) },
 361         { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
 362         { "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) },
 363         { "INT3434", LPSS_ADDR(lpt_uart_dev_desc) },
 364         { "INT3435", LPSS_ADDR(lpt_uart_dev_desc) },
 365         { "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) },
 366         { "INT3437", },
 367
 368         /* Wildcat Point LPSS devices */
 369         { "INT3438", LPSS_ADDR(lpt_dev_desc) },
 370
 371         { }
 372 };
 373
 374 #ifdef CONFIG_X86_INTEL_LPSS
 375
 376 static int is_memory(struct acpi_resource *res, void *not_used)
 377 {
 378         struct resource r;
 379         return !acpi_dev_resource_memory(res, &r);
 380 }
 381
 382 /* LPSS main clock device. */
 383 static struct platform_device *lpss_clk_dev;
 384
 385 static inline void lpt_register_clock_device(void)
 386 {
 387         lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
 388 }
 389
 390 static int register_device_clock(struct acpi_device *adev,
 391                                  struct lpss_private_data *pdata)
 392 {
 393         const struct lpss_device_desc *dev_desc = pdata->dev_desc;
 394         const char *devname = dev_name(&adev->dev);
 395         struct clk *clk;
 396         struct lpss_clk_data *clk_data;
 397         const char *parent, *clk_name;
 398         void __iomem *prv_base;
 399
 400         if (!lpss_clk_dev)
 401                 lpt_register_clock_device();
 402
 403         clk_data = platform_get_drvdata(lpss_clk_dev);
 404         if (!clk_data)
 405                 return -ENODEV;
 406         clk = clk_data->clk;
 407
 408         if (!pdata->mmio_base
 409             || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
 410                 return -ENODATA;
 411
 412         parent = clk_data->name;
 413         prv_base = pdata->mmio_base + dev_desc->prv_offset;
 414
 415         if (pdata->fixed_clk_rate) {
 416                 clk = clk_register_fixed_rate(NULL, devname, parent, 0,
 417                                               pdata->fixed_clk_rate);
 418                 goto out;
 419         }
 420
 421         if (dev_desc->flags & LPSS_CLK_GATE) {
 422                 clk = clk_register_gate(NULL, devname, parent, 0,
 423                                         prv_base, 0, 0, NULL);
 424                 parent = devname;
 425         }
 426
 427         if (dev_desc->flags & LPSS_CLK_DIVIDER) {
 428                 /* Prevent division by zero */
 429                 if (!readl(prv_base))
 430                         writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base);
 431
 432                 clk_name = kasprintf(GFP_KERNEL, "%s-div", devname);
 433                 if (!clk_name)
 434                         return -ENOMEM;
 435                 clk = clk_register_fractional_divider(NULL, clk_name, parent,
 436                                                       0, prv_base,
 437                                                       1, 15, 16, 15, 0, NULL);
 438                 parent = clk_name;
 439
 440                 clk_name = kasprintf(GFP_KERNEL, "%s-update", devname);
 441                 if (!clk_name) {
 442                         kfree(parent);
 443                         return -ENOMEM;
 444                 }
 445                 clk = clk_register_gate(NULL, clk_name, parent,
 446                                         CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
 447                                         prv_base, 31, 0, NULL);
 448                 kfree(parent);
 449                 kfree(clk_name);
 450         }
 451 out:
 452         if (IS_ERR(clk))
 453                 return PTR_ERR(clk);
 454
 455         pdata->clk = clk;
 456         clk_register_clkdev(clk, dev_desc->clk_con_id, devname);
 457         return 0;
 458 }
 459
 460 struct lpss_device_links {
 461         const char *supplier_hid;
 462         const char *supplier_uid;
 463         const char *consumer_hid;
 464         const char *consumer_uid;
 465         u32 flags;
 466 };
 467
 468 /*
 469  * The _DEP method is used to identify dependencies but instead of creating
 470  * device links for every handle in _DEP, only links in the following list are
 471  * created. That is necessary because, in the general case, _DEP can refer to
 472  * devices that might not have drivers, or that are on different buses, or where
 473  * the supplier is not enumerated until after the consumer is probed.
 474  */
 475 static const struct lpss_device_links lpss_device_links[] = {
 476         {"808622C1", "7", "80860F14", "3", DL_FLAG_PM_RUNTIME},
 477         {"808622C1", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
 478         {"80860F41", "5", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
 479 };
 480
 481 static bool hid_uid_match(struct acpi_device *adev,
 482                           const char *hid2, const char *uid2)
 483 {
 484         const char *hid1 = acpi_device_hid(adev);
 485         const char *uid1 = acpi_device_uid(adev);
 486
 487         if (strcmp(hid1, hid2))
 488                 return false;
 489
 490         if (!uid2)
 491                 return true;
 492
 493         return uid1 && !strcmp(uid1, uid2);
 494 }
 495
 496 static bool acpi_lpss_is_supplier(struct acpi_device *adev,
 497                                   const struct lpss_device_links *link)
 498 {
 499         return hid_uid_match(adev, link->supplier_hid, link->supplier_uid);
 500 }
 501
 502 static bool acpi_lpss_is_consumer(struct acpi_device *adev,
 503                                   const struct lpss_device_links *link)
 504 {
 505         return hid_uid_match(adev, link->consumer_hid, link->consumer_uid);
 506 }
 507
 508 struct hid_uid {
 509         const char *hid;
 510         const char *uid;
 511 };
 512
 513 static int match_hid_uid(struct device *dev, const void *data)
 514 {
 515         struct acpi_device *adev = ACPI_COMPANION(dev);
 516         const struct hid_uid *id = data;
 517
 518         if (!adev)
 519                 return 0;
 520
 521         return hid_uid_match(adev, id->hid, id->uid);
 522 }
 523
 524 static struct device *acpi_lpss_find_device(const char *hid, const char *uid)
 525 {
 526         struct device *dev;
 527
 528         struct hid_uid data = {
 529                 .hid = hid,
 530                 .uid = uid,
 531         };
 532
 533         dev = bus_find_device(&platform_bus_type, NULL, &data, match_hid_uid);
 534         if (dev)
 535                 return dev;
 536
 537         return bus_find_device(&pci_bus_type, NULL, &data, match_hid_uid);
 538 }
 539
 540 static bool acpi_lpss_dep(struct acpi_device *adev, acpi_handle handle)
 541 {
 542         struct acpi_handle_list dep_devices;
 543         acpi_status status;
 544         int i;
 545
 546         if (!acpi_has_method(adev->handle, "_DEP"))
 547                 return false;
 548
 549         status = acpi_evaluate_reference(adev->handle, "_DEP", NULL,
 550                                          &dep_devices);
 551         if (ACPI_FAILURE(status)) {
 552                 dev_dbg(&adev->dev, "Failed to evaluate _DEP.\n");
 553                 return false;
 554         }
 555
 556         for (i = 0; i < dep_devices.count; i++) {
 557                 if (dep_devices.handles[i] == handle)
 558                         return true;
 559         }
 560
 561         return false;
 562 }
 563
 564 static void acpi_lpss_link_consumer(struct device *dev1,
 565                                     const struct lpss_device_links *link)
 566 {
 567         struct device *dev2;
 568
 569         dev2 = acpi_lpss_find_device(link->consumer_hid, link->consumer_uid);
 570         if (!dev2)
 571                 return;
 572
 573         if (acpi_lpss_dep(ACPI_COMPANION(dev2), ACPI_HANDLE(dev1)))
 574                 device_link_add(dev2, dev1, link->flags);
 575
 576         put_device(dev2);
 577 }
 578
 579 static void acpi_lpss_link_supplier(struct device *dev1,
 580                                     const struct lpss_device_links *link)
 581 {
 582         struct device *dev2;
 583
 584         dev2 = acpi_lpss_find_device(link->supplier_hid, link->supplier_uid);
 585         if (!dev2)
 586                 return;
 587
 588         if (acpi_lpss_dep(ACPI_COMPANION(dev1), ACPI_HANDLE(dev2)))
 589                 device_link_add(dev1, dev2, link->flags);
 590
 591         put_device(dev2);
 592 }
 593
 594 static void acpi_lpss_create_device_links(struct acpi_device *adev,
 595                                           struct platform_device *pdev)
 596 {
 597         int i;
 598
 599         for (i = 0; i < ARRAY_SIZE(lpss_device_links); i++) {
 600                 const struct lpss_device_links *link = &lpss_device_links[i];
 601
 602                 if (acpi_lpss_is_supplier(adev, link))
 603                         acpi_lpss_link_consumer(&pdev->dev, link);
 604
 605                 if (acpi_lpss_is_consumer(adev, link))
 606                         acpi_lpss_link_supplier(&pdev->dev, link);
 607         }
 608 }
 609
 610 static int acpi_lpss_create_device(struct acpi_device *adev,
 611                                    const struct acpi_device_id *id)
 612 {
 613         const struct lpss_device_desc *dev_desc;
 614         struct lpss_private_data *pdata;
 615         struct resource_entry *rentry;
 616         struct list_head resource_list;
 617         struct platform_device *pdev;
 618         int ret;
 619
 620         dev_desc = (const struct lpss_device_desc *)id->driver_data;
 621         if (!dev_desc) {
 622                 pdev = acpi_create_platform_device(adev, NULL);
 623                 return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1;
 624         }
 625         pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
 626         if (!pdata)
 627                 return -ENOMEM;
 628
 629         INIT_LIST_HEAD(&resource_list);
 630         ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL);
 631         if (ret < 0)
 632                 goto err_out;
 633
 634         list_for_each_entry(rentry, &resource_list, node)
 635                 if (resource_type(rentry->res) == IORESOURCE_MEM) {
 636                         if (dev_desc->prv_size_override)
 637                                 pdata->mmio_size = dev_desc->prv_size_override;
 638                         else
 639                                 pdata->mmio_size = resource_size(rentry->res);
 640                         pdata->mmio_base = ioremap(rentry->res->start,
 641                                                    pdata->mmio_size);
 642                         break;
 643                 }
 644
 645         acpi_dev_free_resource_list(&resource_list);
 646
 647         if (!pdata->mmio_base) {
 648                 /* Avoid acpi_bus_attach() instantiating a pdev for this dev. */
 649                 adev->pnp.type.platform_id = 0;
 650                 /* Skip the device, but continue the namespace scan. */
 651                 ret = 0;
 652                 goto err_out;
 653         }
 654
 655         pdata->adev = adev;
 656         pdata->dev_desc = dev_desc;
 657
 658         if (dev_desc->setup)
 659                 dev_desc->setup(pdata);
 660
 661         if (dev_desc->flags & LPSS_CLK) {
 662                 ret = register_device_clock(adev, pdata);
 663                 if (ret) {
 664                         /* Skip the device, but continue the namespace scan. */
 665                         ret = 0;
 666                         goto err_out;
 667                 }
 668         }
 669
 670         /*
 671          * This works around a known issue in ACPI tables where LPSS devices
 672          * have _PS0 and _PS3 without _PSC (and no power resources), so
 673          * acpi_bus_init_power() will assume that the BIOS has put them into D0.
 674          */
 675         acpi_device_fix_up_power(adev);
 676
 677         adev->driver_data = pdata;
 678         pdev = acpi_create_platform_device(adev, dev_desc->properties);
 679         if (!IS_ERR_OR_NULL(pdev)) {
 680                 acpi_lpss_create_device_links(adev, pdev);
 681                 return 1;
 682         }
 683
 684         ret = PTR_ERR(pdev);
 685         adev->driver_data = NULL;
 686
 687  err_out:
 688         kfree(pdata);
 689         return ret;
 690 }
 691
 692 static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg)
 693 {
 694         return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
 695 }
 696
 697 static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata,
 698                              unsigned int reg)
 699 {
 700         writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
 701 }
 702
 703 static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
 704 {
 705         struct acpi_device *adev;
 706         struct lpss_private_data *pdata;
 707         unsigned long flags;
 708         int ret;
 709
 710         ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev);
 711         if (WARN_ON(ret))
 712                 return ret;
 713
 714         spin_lock_irqsave(&dev->power.lock, flags);
 715         if (pm_runtime_suspended(dev)) {
 716                 ret = -EAGAIN;
 717                 goto out;
 718         }
 719         pdata = acpi_driver_data(adev);
 720         if (WARN_ON(!pdata || !pdata->mmio_base)) {
 721                 ret = -ENODEV;
 722                 goto out;
 723         }
 724         *val = __lpss_reg_read(pdata, reg);
 725
 726  out:
 727         spin_unlock_irqrestore(&dev->power.lock, flags);
 728         return ret;
 729 }
 730
 731 static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr,
 732                              char *buf)
 733 {
 734         u32 ltr_value = 0;
 735         unsigned int reg;
 736         int ret;
 737
 738         reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR;
 739         ret = lpss_reg_read(dev, reg, &ltr_value);
 740         if (ret)
 741                 return ret;
 742
 743         return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value);
 744 }
 745
 746 static ssize_t lpss_ltr_mode_show(struct device *dev,
 747                                   struct device_attribute *attr, char *buf)
 748 {
 749         u32 ltr_mode = 0;
 750         char *outstr;
 751         int ret;
 752
 753         ret = lpss_reg_read(dev, LPSS_GENERAL, &ltr_mode);
 754         if (ret)
 755                 return ret;
 756
 757         outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto";
 758         return sprintf(buf, "%s\n", outstr);
 759 }
 760
 761 static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL);
 762 static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL);
 763 static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL);
 764
 765 static struct attribute *lpss_attrs[] = {
 766         &dev_attr_auto_ltr.attr,
 767         &dev_attr_sw_ltr.attr,
 768         &dev_attr_ltr_mode.attr,
 769         NULL,
 770 };
 771
 772 static const struct attribute_group lpss_attr_group = {
 773         .attrs = lpss_attrs,
 774         .name = "lpss_ltr",
 775 };
 776
 777 static void acpi_lpss_set_ltr(struct device *dev, s32 val)
 778 {
 779         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 780         u32 ltr_mode, ltr_val;
 781
 782         ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL);
 783         if (val < 0) {
 784                 if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) {
 785                         ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW;
 786                         __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
 787                 }
 788                 return;
 789         }
 790         ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK;
 791         if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) {
 792                 ltr_val |= LPSS_LTR_SNOOP_LAT_32US;
 793                 val = LPSS_LTR_MAX_VAL;
 794         } else if (val > LPSS_LTR_MAX_VAL) {
 795                 ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ;
 796                 val >>= LPSS_LTR_SNOOP_LAT_SHIFT;
 797         } else {
 798                 ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ;
 799         }
 800         ltr_val |= val;
 801         __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR);
 802         if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) {
 803                 ltr_mode |= LPSS_GENERAL_LTR_MODE_SW;
 804                 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
 805         }
 806 }
 807
 808 #ifdef CONFIG_PM
 809 /**
 810  * acpi_lpss_save_ctx() - Save the private registers of LPSS device
 811  * @dev: LPSS device
 812  * @pdata: pointer to the private data of the LPSS device
 813  *
 814  * Most LPSS devices have private registers which may loose their context when
 815  * the device is powered down. acpi_lpss_save_ctx() saves those registers into
 816  * prv_reg_ctx array.
 817  */
 818 static void acpi_lpss_save_ctx(struct device *dev,
 819                                struct lpss_private_data *pdata)
 820 {
 821         unsigned int i;
 822
 823         for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
 824                 unsigned long offset = i * sizeof(u32);
 825
 826                 pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset);
 827                 dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n",
 828                         pdata->prv_reg_ctx[i], offset);
 829         }
 830 }
 831
 832 /**
 833  * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
 834  * @dev: LPSS device
 835  * @pdata: pointer to the private data of the LPSS device
 836  *
 837  * Restores the registers that were previously stored with acpi_lpss_save_ctx().
 838  */
 839 static void acpi_lpss_restore_ctx(struct device *dev,
 840                                   struct lpss_private_data *pdata)
 841 {
 842         unsigned int i;
 843
 844         for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
 845                 unsigned long offset = i * sizeof(u32);
 846
 847                 __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
 848                 dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
 849                         pdata->prv_reg_ctx[i], offset);
 850         }
 851 }
 852
 853 static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
 854 {
 855         /*
 856          * The following delay is needed or the subsequent write operations may
 857          * fail. The LPSS devices are actually PCI devices and the PCI spec
 858          * expects 10ms delay before the device can be accessed after D3 to D0
 859          * transition. However some platforms like BSW does not need this delay.
 860          */
 861         unsigned int delay = 10;        /* default 10ms delay */
 862
 863         if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY)
 864                 delay = 0;
 865
 866         msleep(delay);
 867 }
 868
 869 static int acpi_lpss_activate(struct device *dev)
 870 {
 871         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 872         int ret;
 873
 874         ret = acpi_dev_resume(dev);
 875         if (ret)
 876                 return ret;
 877
 878         acpi_lpss_d3_to_d0_delay(pdata);
 879
 880         /*
 881          * This is called only on ->probe() stage where a device is either in
 882          * known state defined by BIOS or most likely powered off. Due to this
 883          * we have to deassert reset line to be sure that ->probe() will
 884          * recognize the device.
 885          */
 886         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 887                 lpss_deassert_reset(pdata);
 888
 889         return 0;
 890 }
 891
 892 static void acpi_lpss_dismiss(struct device *dev)
 893 {
 894         acpi_dev_suspend(dev, false);
 895 }
 896
 897 /* IOSF SB for LPSS island */
 898 #define LPSS_IOSF_UNIT_LPIOEP           0xA0
 899 #define LPSS_IOSF_UNIT_LPIO1            0xAB
 900 #define LPSS_IOSF_UNIT_LPIO2            0xAC
 901
 902 #define LPSS_IOSF_PMCSR                 0x84
 903 #define LPSS_PMCSR_D0                   0
 904 #define LPSS_PMCSR_D3hot                3
 905 #define LPSS_PMCSR_Dx_MASK              GENMASK(1, 0)
 906
 907 #define LPSS_IOSF_GPIODEF0              0x154
 908 #define LPSS_GPIODEF0_DMA1_D3           BIT(2)
 909 #define LPSS_GPIODEF0_DMA2_D3           BIT(3)
 910 #define LPSS_GPIODEF0_DMA_D3_MASK       GENMASK(3, 2)
 911 #define LPSS_GPIODEF0_DMA_LLP           BIT(13)
 912
 913 static DEFINE_MUTEX(lpss_iosf_mutex);
 914 static bool lpss_iosf_d3_entered = true;
 915
 916 static void lpss_iosf_enter_d3_state(void)
 917 {
 918         u32 value1 = 0;
 919         u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
 920         u32 value2 = LPSS_PMCSR_D3hot;
 921         u32 mask2 = LPSS_PMCSR_Dx_MASK;
 922         /*
 923          * PMC provides an information about actual status of the LPSS devices.
 924          * Here we read the values related to LPSS power island, i.e. LPSS
 925          * devices, excluding both LPSS DMA controllers, along with SCC domain.
 926          */
 927         u32 func_dis, d3_sts_0, pmc_status;
 928         int ret;
 929
 930         ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
 931         if (ret)
 932                 return;
 933
 934         mutex_lock(&lpss_iosf_mutex);
 935
 936         ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
 937         if (ret)
 938                 goto exit;
 939
 940         /*
 941          * Get the status of entire LPSS power island per device basis.
 942          * Shutdown both LPSS DMA controllers if and only if all other devices
 943          * are already in D3hot.
 944          */
 945         pmc_status = (~(d3_sts_0 | func_dis)) & pmc_atom_d3_mask;
 946         if (pmc_status)
 947                 goto exit;
 948
 949         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
 950                         LPSS_IOSF_PMCSR, value2, mask2);
 951
 952         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
 953                         LPSS_IOSF_PMCSR, value2, mask2);
 954
 955         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
 956                         LPSS_IOSF_GPIODEF0, value1, mask1);
 957
 958         lpss_iosf_d3_entered = true;
 959
 960 exit:
 961         mutex_unlock(&lpss_iosf_mutex);
 962 }
 963
 964 static void lpss_iosf_exit_d3_state(void)
 965 {
 966         u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 |
 967                      LPSS_GPIODEF0_DMA_LLP;
 968         u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
 969         u32 value2 = LPSS_PMCSR_D0;
 970         u32 mask2 = LPSS_PMCSR_Dx_MASK;
 971
 972         mutex_lock(&lpss_iosf_mutex);
 973
 974         if (!lpss_iosf_d3_entered)
 975                 goto exit;
 976
 977         lpss_iosf_d3_entered = false;
 978
 979         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
 980                         LPSS_IOSF_GPIODEF0, value1, mask1);
 981
 982         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
 983                         LPSS_IOSF_PMCSR, value2, mask2);
 984
 985         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
 986                         LPSS_IOSF_PMCSR, value2, mask2);
 987
 988 exit:
 989         mutex_unlock(&lpss_iosf_mutex);
 990 }
 991
 992 static int acpi_lpss_suspend(struct device *dev, bool wakeup)
 993 {
 994         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 995         int ret;
 996
 997         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 998                 acpi_lpss_save_ctx(dev, pdata);
 999
1000         ret = acpi_dev_suspend(dev, wakeup);
1001
1002         /*
1003          * This call must be last in the sequence, otherwise PMC will return
1004          * wrong status for devices being about to be powered off. See
1005          * lpss_iosf_enter_d3_state() for further information.
1006          */
1007         if (acpi_target_system_state() == ACPI_STATE_S0 &&
1008             lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
1009                 lpss_iosf_enter_d3_state();
1010
1011         return ret;
1012 }
1013
1014 static int acpi_lpss_resume(struct device *dev)
1015 {
1016         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1017         int ret;
1018
1019         /*
1020          * This call is kept first to be in symmetry with
1021          * acpi_lpss_runtime_suspend() one.
1022          */
1023         if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
1024                 lpss_iosf_exit_d3_state();
1025
1026         ret = acpi_dev_resume(dev);
1027         if (ret)
1028                 return ret;
1029
1030         acpi_lpss_d3_to_d0_delay(pdata);
1031
1032         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
1033                 acpi_lpss_restore_ctx(dev, pdata);
1034
1035         return 0;
1036 }
1037
1038 #ifdef CONFIG_PM_SLEEP
1039 static int acpi_lpss_do_suspend_late(struct device *dev)
1040 {
1041         int ret;
1042
1043         if (dev_pm_smart_suspend_and_suspended(dev))
1044                 return 0;
1045
1046         ret = pm_generic_suspend_late(dev);
1047         return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
1048 }
1049
1050 static int acpi_lpss_suspend_late(struct device *dev)
1051 {
1052         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1053
1054         if (pdata->dev_desc->resume_from_noirq)
1055                 return 0;
1056
1057         return acpi_lpss_do_suspend_late(dev);
1058 }
1059
1060 static int acpi_lpss_suspend_noirq(struct device *dev)
1061 {
1062         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1063         int ret;
1064
1065         if (pdata->dev_desc->resume_from_noirq) {
1066                 /*
1067                  * The driver's ->suspend_late callback will be invoked by
1068                  * acpi_lpss_do_suspend_late(), with the assumption that the
1069                  * driver really wanted to run that code in ->suspend_noirq, but
1070                  * it could not run after acpi_dev_suspend() and the driver
1071                  * expected the latter to be called in the "late" phase.
1072                  */
1073                 ret = acpi_lpss_do_suspend_late(dev);
1074                 if (ret)
1075                         return ret;
1076         }
1077
1078         return acpi_subsys_suspend_noirq(dev);
1079 }
1080
1081 static int acpi_lpss_do_resume_early(struct device *dev)
1082 {
1083         int ret = acpi_lpss_resume(dev);
1084
1085         return ret ? ret : pm_generic_resume_early(dev);
1086 }
1087
1088 static int acpi_lpss_resume_early(struct device *dev)
1089 {
1090         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1091
1092         if (pdata->dev_desc->resume_from_noirq)
1093                 return 0;
1094
1095         return acpi_lpss_do_resume_early(dev);
1096 }
1097
1098 static int acpi_lpss_resume_noirq(struct device *dev)
1099 {
1100         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1101         int ret;
1102
1103         /* Follow acpi_subsys_resume_noirq(). */
1104         if (dev_pm_may_skip_resume(dev))
1105                 return 0;
1106
1107         if (dev_pm_smart_suspend_and_suspended(dev))
1108                 pm_runtime_set_active(dev);
1109
1110         ret = pm_generic_resume_noirq(dev);
1111         if (ret)
1112                 return ret;
1113
1114         if (!pdata->dev_desc->resume_from_noirq)
1115                 return 0;
1116
1117         /*
1118          * The driver's ->resume_early callback will be invoked by
1119          * acpi_lpss_do_resume_early(), with the assumption that the driver
1120          * really wanted to run that code in ->resume_noirq, but it could not
1121          * run before acpi_dev_resume() and the driver expected the latter to be
1122          * called in the "early" phase.
1123          */
1124         return acpi_lpss_do_resume_early(dev);
1125 }
1126
1127 static int acpi_lpss_do_restore_early(struct device *dev)
1128 {
1129         int ret = acpi_lpss_resume(dev);
1130
1131         return ret ? ret : pm_generic_restore_early(dev);
1132 }
1133
1134 static int acpi_lpss_restore_early(struct device *dev)
1135 {
1136         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1137
1138         if (pdata->dev_desc->resume_from_noirq)
1139                 return 0;
1140
1141         return acpi_lpss_do_restore_early(dev);
1142 }
1143
1144 static int acpi_lpss_restore_noirq(struct device *dev)
1145 {
1146         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1147         int ret;
1148
1149         ret = pm_generic_restore_noirq(dev);
1150         if (ret)
1151                 return ret;
1152
1153         if (!pdata->dev_desc->resume_from_noirq)
1154                 return 0;
1155
1156         /* This is analogous to what happens in acpi_lpss_resume_noirq(). */
1157         return acpi_lpss_do_restore_early(dev);
1158 }
1159
1160 static int acpi_lpss_do_poweroff_late(struct device *dev)
1161 {
1162         int ret = pm_generic_poweroff_late(dev);
1163
1164         return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
1165 }
1166
1167 static int acpi_lpss_poweroff_late(struct device *dev)
1168 {
1169         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1170
1171         if (dev_pm_smart_suspend_and_suspended(dev))
1172                 return 0;
1173
1174         if (pdata->dev_desc->resume_from_noirq)
1175                 return 0;
1176
1177         return acpi_lpss_do_poweroff_late(dev);
1178 }
1179
1180 static int acpi_lpss_poweroff_noirq(struct device *dev)
1181 {
1182         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1183
1184         if (dev_pm_smart_suspend_and_suspended(dev))
1185                 return 0;
1186
1187         if (pdata->dev_desc->resume_from_noirq) {
1188                 /* This is analogous to the acpi_lpss_suspend_noirq() case. */
1189                 int ret = acpi_lpss_do_poweroff_late(dev);
1190                 if (ret)
1191                         return ret;
1192         }
1193
1194         return pm_generic_poweroff_noirq(dev);
1195 }
1196 #endif /* CONFIG_PM_SLEEP */
1197
1198 static int acpi_lpss_runtime_suspend(struct device *dev)
1199 {
1200         int ret = pm_generic_runtime_suspend(dev);
1201
1202         return ret ? ret : acpi_lpss_suspend(dev, true);
1203 }
1204
1205 static int acpi_lpss_runtime_resume(struct device *dev)
1206 {
1207         int ret = acpi_lpss_resume(dev);
1208
1209         return ret ? ret : pm_generic_runtime_resume(dev);
1210 }
1211 #endif /* CONFIG_PM */
1212
1213 static struct dev_pm_domain acpi_lpss_pm_domain = {
1214 #ifdef CONFIG_PM
1215         .activate = acpi_lpss_activate,
1216         .dismiss = acpi_lpss_dismiss,
1217 #endif
1218         .ops = {
1219 #ifdef CONFIG_PM
1220 #ifdef CONFIG_PM_SLEEP
1221                 .prepare = acpi_subsys_prepare,
1222                 .complete = acpi_subsys_complete,
1223                 .suspend = acpi_subsys_suspend,
1224                 .suspend_late = acpi_lpss_suspend_late,
1225                 .suspend_noirq = acpi_lpss_suspend_noirq,
1226                 .resume_noirq = acpi_lpss_resume_noirq,
1227                 .resume_early = acpi_lpss_resume_early,
1228                 .freeze = acpi_subsys_freeze,
1229                 .poweroff = acpi_subsys_poweroff,
1230                 .poweroff_late = acpi_lpss_poweroff_late,
1231                 .poweroff_noirq = acpi_lpss_poweroff_noirq,
1232                 .restore_noirq = acpi_lpss_restore_noirq,
1233                 .restore_early = acpi_lpss_restore_early,
1234 #endif
1235                 .runtime_suspend = acpi_lpss_runtime_suspend,
1236                 .runtime_resume = acpi_lpss_runtime_resume,
1237 #endif
1238         },
1239 };
1240
1241 static int acpi_lpss_platform_notify(struct notifier_block *nb,
1242                                      unsigned long action, void *data)
1243 {
1244         struct platform_device *pdev = to_platform_device(data);
1245         struct lpss_private_data *pdata;
1246         struct acpi_device *adev;
1247         const struct acpi_device_id *id;
1248
1249         id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
1250         if (!id || !id->driver_data)
1251                 return 0;
1252
1253         if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
1254                 return 0;
1255
1256         pdata = acpi_driver_data(adev);
1257         if (!pdata)
1258                 return 0;
1259
1260         if (pdata->mmio_base &&
1261             pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
1262                 dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
1263                 return 0;
1264         }
1265
1266         switch (action) {
1267         case BUS_NOTIFY_BIND_DRIVER:
1268                 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1269                 break;
1270         case BUS_NOTIFY_DRIVER_NOT_BOUND:
1271         case BUS_NOTIFY_UNBOUND_DRIVER:
1272                 dev_pm_domain_set(&pdev->dev, NULL);
1273                 break;
1274         case BUS_NOTIFY_ADD_DEVICE:
1275                 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1276                 if (pdata->dev_desc->flags & LPSS_LTR)
1277                         return sysfs_create_group(&pdev->dev.kobj,
1278                                                   &lpss_attr_group);
1279                 break;
1280         case BUS_NOTIFY_DEL_DEVICE:
1281                 if (pdata->dev_desc->flags & LPSS_LTR)
1282                         sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
1283                 dev_pm_domain_set(&pdev->dev, NULL);
1284                 break;
1285         default:
1286                 break;
1287         }
1288
1289         return 0;
1290 }
1291
1292 static struct notifier_block acpi_lpss_nb = {
1293         .notifier_call = acpi_lpss_platform_notify,
1294 };
1295
1296 static void acpi_lpss_bind(struct device *dev)
1297 {
1298         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1299
1300         if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR))
1301                 return;
1302
1303         if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE)
1304                 dev->power.set_latency_tolerance = acpi_lpss_set_ltr;
1305         else
1306                 dev_err(dev, "MMIO size insufficient to access LTR\n");
1307 }
1308
1309 static void acpi_lpss_unbind(struct device *dev)
1310 {
1311         dev->power.set_latency_tolerance = NULL;
1312 }
1313
1314 static struct acpi_scan_handler lpss_handler = {
1315         .ids = acpi_lpss_device_ids,
1316         .attach = acpi_lpss_create_device,
1317         .bind = acpi_lpss_bind,
1318         .unbind = acpi_lpss_unbind,
1319 };
1320
1321 void __init acpi_lpss_init(void)
1322 {
1323         const struct x86_cpu_id *id;
1324         int ret;
1325
1326         ret = lpt_clk_init();
1327         if (ret)
1328                 return;
1329
1330         id = x86_match_cpu(lpss_cpu_ids);
1331         if (id)
1332                 lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
1333
1334         bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
1335         acpi_scan_add_handler(&lpss_handler);
1336 }
1337
1338 #else
1339
1340 static struct acpi_scan_handler lpss_handler = {
1341         .ids = acpi_lpss_device_ids,
1342 };
1343
1344 void __init acpi_lpss_init(void)
1345 {
1346         acpi_scan_add_handler(&lpss_handler);
1347 }
1348
1349 #endif /* CONFIG_X86_INTEL_LPSS */