drivers/gpu/drm/i915/gt/uc/intel_guc_fw.c

   1 // SPDX-License-Identifier: MIT
   2 /*
   3  * Copyright © 2014-2019 Intel Corporation
   4  *
   5  * Authors:
   6  *    Vinit Azad <[email protected]>
   7  *    Ben Widawsky <[email protected]>
   8  *    Dave Gordon <[email protected]>
   9  *    Alex Dai <[email protected]>
  10  */
  11
  12 #include "gt/intel_gt.h"
  13 #include "intel_guc_fw.h"
  14 #include "i915_drv.h"
  15
  16 static void guc_prepare_xfer(struct intel_uncore *uncore)
  17 {
  18         u32 shim_flags = GUC_DISABLE_SRAM_INIT_TO_ZEROES |
  19                          GUC_ENABLE_READ_CACHE_LOGIC |
  20                          GUC_ENABLE_MIA_CACHING |
  21                          GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA |
  22                          GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA |
  23                          GUC_ENABLE_MIA_CLOCK_GATING;
  24
  25         /* Must program this register before loading the ucode with DMA */
  26         intel_uncore_write(uncore, GUC_SHIM_CONTROL, shim_flags);
  27
  28         if (IS_GEN9_LP(uncore->i915))
  29                 intel_uncore_write(uncore, GEN9LP_GT_PM_CONFIG, GT_DOORBELL_ENABLE);
  30         else
  31                 intel_uncore_write(uncore, GEN9_GT_PM_CONFIG, GT_DOORBELL_ENABLE);
  32
  33         if (GRAPHICS_VER(uncore->i915) == 9) {
  34                 /* DOP Clock Gating Enable for GuC clocks */
  35                 intel_uncore_rmw(uncore, GEN7_MISCCPCTL,
  36                                  0, GEN8_DOP_CLOCK_GATE_GUC_ENABLE);
  37
  38                 /* allows for 5us (in 10ns units) before GT can go to RC6 */
  39                 intel_uncore_write(uncore, GUC_ARAT_C6DIS, 0x1FF);
  40         }
  41 }
  42
  43 /* Copy RSA signature from the fw image to HW for verification */
  44 static void guc_xfer_rsa(struct intel_uc_fw *guc_fw,
  45                          struct intel_uncore *uncore)
  46 {
  47         u32 rsa[UOS_RSA_SCRATCH_COUNT];
  48         size_t copied;
  49         int i;
  50
  51         copied = intel_uc_fw_copy_rsa(guc_fw, rsa, sizeof(rsa));
  52         GEM_BUG_ON(copied < sizeof(rsa));
  53
  54         for (i = 0; i < UOS_RSA_SCRATCH_COUNT; i++)
  55                 intel_uncore_write(uncore, UOS_RSA_SCRATCH(i), rsa[i]);
  56 }
  57
  58 /*
  59  * Read the GuC status register (GUC_STATUS) and store it in the
  60  * specified location; then return a boolean indicating whether
  61  * the value matches either of two values representing completion
  62  * of the GuC boot process.
  63  *
  64  * This is used for polling the GuC status in a wait_for()
  65  * loop below.
  66  */
  67 static inline bool guc_ready(struct intel_uncore *uncore, u32 *status)
  68 {
  69         u32 val = intel_uncore_read(uncore, GUC_STATUS);
  70         u32 uk_val = val & GS_UKERNEL_MASK;
  71
  72         *status = val;
  73         return (uk_val == GS_UKERNEL_READY) ||
  74                 ((val & GS_MIA_CORE_STATE) && (uk_val == GS_UKERNEL_LAPIC_DONE));
  75 }
  76
  77 static int guc_wait_ucode(struct intel_uncore *uncore)
  78 {
  79         u32 status;
  80         int ret;
  81
  82         /*
  83          * Wait for the GuC to start up.
  84          * NB: Docs recommend not using the interrupt for completion.
  85          * Measurements indicate this should take no more than 20ms, so a
  86          * timeout here indicates that the GuC has failed and is unusable.
  87          * (Higher levels of the driver may decide to reset the GuC and
  88          * attempt the ucode load again if this happens.)
  89          */
  90         ret = wait_for(guc_ready(uncore, &status), 100);
  91         if (ret) {
  92                 struct drm_device *drm = &uncore->i915->drm;
  93
  94                 drm_dbg(drm, "GuC load failed: status = 0x%08X\n", status);
  95                 drm_dbg(drm, "GuC load failed: status: Reset = %d, "
  96                         "BootROM = 0x%02X, UKernel = 0x%02X, "
  97                         "MIA = 0x%02X, Auth = 0x%02X\n",
  98                         REG_FIELD_GET(GS_MIA_IN_RESET, status),
  99                         REG_FIELD_GET(GS_BOOTROM_MASK, status),
 100                         REG_FIELD_GET(GS_UKERNEL_MASK, status),
 101                         REG_FIELD_GET(GS_MIA_MASK, status),
 102                         REG_FIELD_GET(GS_AUTH_STATUS_MASK, status));
 103
 104                 if ((status & GS_BOOTROM_MASK) == GS_BOOTROM_RSA_FAILED) {
 105                         drm_dbg(drm, "GuC firmware signature verification failed\n");
 106                         ret = -ENOEXEC;
 107                 }
 108
 109                 if ((status & GS_UKERNEL_MASK) == GS_UKERNEL_EXCEPTION) {
 110                         drm_dbg(drm, "GuC firmware exception. EIP: %#x\n",
 111                                 intel_uncore_read(uncore, SOFT_SCRATCH(13)));
 112                         ret = -ENXIO;
 113                 }
 114         }
 115
 116         return ret;
 117 }
 118
 119 /**
 120  * intel_guc_fw_upload() - load GuC uCode to device
 121  * @guc: intel_guc structure
 122  *
 123  * Called from intel_uc_init_hw() during driver load, resume from sleep and
 124  * after a GPU reset.
 125  *
 126  * The firmware image should have already been fetched into memory, so only
 127  * check that fetch succeeded, and then transfer the image to the h/w.
 128  *
 129  * Return:      non-zero code on error
 130  */
 131 int intel_guc_fw_upload(struct intel_guc *guc)
 132 {
 133         struct intel_gt *gt = guc_to_gt(guc);
 134         struct intel_uncore *uncore = gt->uncore;
 135         int ret;
 136
 137         guc_prepare_xfer(uncore);
 138
 139         /*
 140          * Note that GuC needs the CSS header plus uKernel code to be copied
 141          * by the DMA engine in one operation, whereas the RSA signature is
 142          * loaded via MMIO.
 143          */
 144         guc_xfer_rsa(&guc->fw, uncore);
 145
 146         /*
 147          * Current uCode expects the code to be loaded at 8k; locations below
 148          * this are used for the stack.
 149          */
 150         ret = intel_uc_fw_upload(&guc->fw, 0x2000, UOS_MOVE);
 151         if (ret)
 152                 goto out;
 153
 154         ret = guc_wait_ucode(uncore);
 155         if (ret)
 156                 goto out;
 157
 158         intel_uc_fw_change_status(&guc->fw, INTEL_UC_FIRMWARE_RUNNING);
 159         return 0;
 160
 161 out:
 162         intel_uc_fw_change_status(&guc->fw, INTEL_UC_FIRMWARE_FAIL);
 163         return ret;
 164 }