2 * linux/arch/mips/txx9/pci.c
4 * Based on linux/arch/mips/txx9/rbtx4927/setup.c,
5 * linux/arch/mips/txx9/rbtx4938/setup.c,
6 * and RBTX49xx patch from CELF patch archive.
8 * Copyright 2001-2005 MontaVista Software Inc.
10 * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
12 * This file is subject to the terms and conditions of the GNU General Public
13 * License. See the file "COPYING" in the main directory of this archive
16 #include <linux/delay.h>
17 #include <linux/jiffies.h>
19 #include <asm/txx9/generic.h>
20 #include <asm/txx9/pci.h>
21 #ifdef CONFIG_TOSHIBA_FPCIB0
22 #include <linux/interrupt.h>
23 #include <linux/slab.h>
24 #include <asm/i8259.h>
25 #include <asm/txx9/smsc_fdc37m81x.h>
29 early_read_config_word(struct pci_controller *hose,
30 int top_bus, int bus, int devfn, int offset, u16 *value)
32 struct pci_bus fake_bus;
34 fake_bus.number = bus;
35 fake_bus.sysdata = hose;
36 fake_bus.ops = hose->pci_ops;
39 /* Fake a parent bus structure. */
40 fake_bus.parent = &fake_bus;
42 fake_bus.parent = NULL;
44 return pci_bus_read_config_word(&fake_bus, devfn, offset, value);
47 int __init txx9_pci66_check(struct pci_controller *hose, int top_bus,
55 /* It seems SLC90E66 needs some time after PCI reset... */
58 pr_info("PCI: Checking 66MHz capabilities...\n");
60 for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
61 if (PCI_FUNC(pci_devfn))
63 if (early_read_config_word(hose, top_bus, current_bus,
64 pci_devfn, PCI_VENDOR_ID, &vid) !=
70 /* check 66MHz capability */
74 early_read_config_word(hose, top_bus, current_bus,
75 pci_devfn, PCI_STATUS, &stat);
76 if (!(stat & PCI_STATUS_66MHZ)) {
77 pr_debug("PCI: %02x:%02x not 66MHz capable.\n",
78 current_bus, pci_devfn);
87 static struct resource primary_pci_mem_res[2] = {
88 { .name = "PCI MEM" },
89 { .name = "PCI MMIO" },
91 static struct resource primary_pci_io_res = { .name = "PCI IO" };
92 struct pci_controller txx9_primary_pcic = {
93 .mem_resource = &primary_pci_mem_res[0],
94 .io_resource = &primary_pci_io_res,
98 int txx9_pci_mem_high __initdata = 1;
100 int txx9_pci_mem_high __initdata;
104 * allocate pci_controller and resources.
105 * mem_base, io_base: physical address. 0 for auto assignment.
106 * mem_size and io_size means max size on auto assignment.
107 * pcic must be &txx9_primary_pcic or NULL.
109 struct pci_controller *__init
110 txx9_alloc_pci_controller(struct pci_controller *pcic,
111 unsigned long mem_base, unsigned long mem_size,
112 unsigned long io_base, unsigned long io_size)
115 struct pci_controller c;
116 struct resource r_mem[2];
117 struct resource r_io;
119 int min_size = 0x10000;
122 new = kzalloc(sizeof(*new), GFP_KERNEL);
125 new->r_mem[0].name = "PCI mem";
126 new->r_mem[1].name = "PCI mmio";
127 new->r_io.name = "PCI io";
128 new->c.mem_resource = new->r_mem;
129 new->c.io_resource = &new->r_io;
132 BUG_ON(pcic != &txx9_primary_pcic);
133 pcic->io_resource->flags = IORESOURCE_IO;
136 * for auto assignment, first search a (big) region for PCI
137 * MEM, then search a region for PCI IO.
140 pcic->mem_resource[0].start = mem_base;
141 pcic->mem_resource[0].end = mem_base + mem_size - 1;
142 if (request_resource(&iomem_resource, &pcic->mem_resource[0]))
145 unsigned long min = 0, max = 0x20000000; /* low 512MB */
147 /* default size for auto assignment */
148 if (txx9_pci_mem_high)
149 mem_size = 0x20000000; /* mem:512M(max) */
151 mem_size = 0x08000000; /* mem:128M(max) */
153 if (txx9_pci_mem_high) {
157 /* search free region for PCI MEM */
158 for (; mem_size >= min_size; mem_size /= 2) {
159 if (allocate_resource(&iomem_resource,
160 &pcic->mem_resource[0],
162 mem_size, NULL, NULL) == 0)
165 if (mem_size < min_size)
169 pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
171 pcic->mem_resource[1].start = io_base;
172 pcic->mem_resource[1].end = io_base + io_size - 1;
173 if (request_resource(&iomem_resource, &pcic->mem_resource[1]))
174 goto release_and_exit;
177 /* default size for auto assignment */
178 io_size = 0x01000000; /* io:16M(max) */
179 /* search free region for PCI IO in low 512MB */
180 for (; io_size >= min_size; io_size /= 2) {
181 if (allocate_resource(&iomem_resource,
182 &pcic->mem_resource[1],
183 io_size, 0, 0x20000000,
184 io_size, NULL, NULL) == 0)
187 if (io_size < min_size)
188 goto release_and_exit;
189 io_base = pcic->mem_resource[1].start;
192 pcic->mem_resource[0].flags = IORESOURCE_MEM;
193 if (pcic == &txx9_primary_pcic &&
194 mips_io_port_base == (unsigned long)-1) {
195 /* map ioport 0 to PCI I/O space address 0 */
196 set_io_port_base(IO_BASE + pcic->mem_resource[1].start);
197 pcic->io_resource->start = 0;
198 pcic->io_offset = 0; /* busaddr == ioaddr */
199 pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start;
201 /* physaddr to ioaddr */
202 pcic->io_resource->start =
203 io_base - (mips_io_port_base - IO_BASE);
204 pcic->io_offset = io_base - (mips_io_port_base - IO_BASE);
205 pcic->io_map_base = mips_io_port_base;
207 pcic->io_resource->end = pcic->io_resource->start + io_size - 1;
209 pcic->mem_offset = 0; /* busaddr == physaddr */
211 pr_info("PCI: IO %pR MEM %pR\n", &pcic->mem_resource[1],
212 &pcic->mem_resource[0]);
214 /* register_pci_controller() will request MEM resource */
215 release_resource(&pcic->mem_resource[0]);
218 release_resource(&pcic->mem_resource[0]);
221 pr_err("PCI: Failed to allocate resources.\n");
226 txx9_arch_pci_init(void)
228 PCIBIOS_MIN_IO = 0x8000; /* reseve legacy I/O space */
231 arch_initcall(txx9_arch_pci_init);
233 /* IRQ/IDSEL mapping */
234 int txx9_pci_option =
235 #ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT
238 TXX9_PCI_OPT_CLK_AUTO;
240 enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT;
242 #ifdef CONFIG_TOSHIBA_FPCIB0
243 static irqreturn_t i8259_interrupt(int irq, void *dev_id)
247 isairq = i8259_irq();
248 if (unlikely(isairq <= I8259A_IRQ_BASE))
250 generic_handle_irq(isairq);
254 static int txx9_i8259_irq_setup(int irq)
259 err = request_irq(irq, &i8259_interrupt, IRQF_SHARED,
260 "cascade(i8259)", (void *)(long)irq);
262 pr_info("PCI-ISA bridge PIC (irq %d)\n", irq);
266 static void __ref quirk_slc90e66_bridge(struct pci_dev *dev)
268 int irq; /* PCI/ISA Bridge interrupt */
272 irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */
275 txx9_i8259_irq_setup(irq);
276 pci_read_config_byte(dev, 0x64, ®_64);
277 pci_read_config_dword(dev, 0xb0, ®_b0);
278 pci_read_config_byte(dev, 0xe1, ®_e1);
279 /* serial irq control */
282 reg_b0 |= 0x00010000;
283 /* ide irq on isa14 */
286 pci_write_config_byte(dev, 0x64, reg_64);
287 pci_write_config_dword(dev, 0xb0, reg_b0);
288 pci_write_config_byte(dev, 0xe1, reg_e1);
290 smsc_fdc37m81x_init(0x3f0);
291 smsc_fdc37m81x_config_beg();
292 smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
294 smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
295 smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
296 smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
298 smsc_fdc37m81x_config_end();
301 static void quirk_slc90e66_ide(struct pci_dev *dev)
304 int regs[2] = {0x41, 0x43};
307 /* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
308 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14);
309 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat);
310 pr_info("PCI: %s: IRQ %02x", pci_name(dev), dat);
311 /* enable SMSC SLC90E66 IDE */
312 for (i = 0; i < ARRAY_SIZE(regs); i++) {
313 pci_read_config_byte(dev, regs[i], &dat);
314 pci_write_config_byte(dev, regs[i], dat | 0x80);
315 pci_read_config_byte(dev, regs[i], &dat);
316 pr_cont(" IDETIM%d %02x", i, dat);
318 pci_read_config_byte(dev, 0x5c, &dat);
320 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
322 * This line of code is intended to provide the user with a work
323 * around solution to the anomalies cited in SMSC's anomaly sheet
324 * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
326 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
329 pci_write_config_byte(dev, 0x5c, dat);
330 pci_read_config_byte(dev, 0x5c, &dat);
331 pr_cont(" REG5C %02x\n", dat);
333 #endif /* CONFIG_TOSHIBA_FPCIB0 */
335 static void tc35815_fixup(struct pci_dev *dev)
337 /* This device may have PM registers but not they are not supported. */
339 dev_info(&dev->dev, "PM disabled\n");
344 static void final_fixup(struct pci_dev *dev)
348 /* Do build-in self test */
349 if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL &&
350 (bist & PCI_BIST_CAPABLE)) {
351 unsigned long timeout;
352 pci_set_power_state(dev, PCI_D0);
353 pr_info("PCI: %s BIST...", pci_name(dev));
354 pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START);
355 timeout = jiffies + HZ * 2; /* timeout after 2 sec */
357 pci_read_config_byte(dev, PCI_BIST, &bist);
358 if (time_after(jiffies, timeout))
360 } while (bist & PCI_BIST_START);
361 if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START))
362 pr_cont("failed. (0x%x)\n", bist);
368 #ifdef CONFIG_TOSHIBA_FPCIB0
369 #define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
370 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
371 quirk_slc90e66_bridge);
372 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
374 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
377 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2,
378 PCI_DEVICE_ID_TOSHIBA_TC35815_NWU, tc35815_fixup);
379 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2,
380 PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939, tc35815_fixup);
381 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
382 DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
384 int pcibios_plat_dev_init(struct pci_dev *dev)
389 static int (*txx9_pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin);
390 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
392 return txx9_pci_map_irq(dev, slot, pin);
395 char * (*txx9_board_pcibios_setup)(char *str) __initdata;
397 char *__init txx9_pcibios_setup(char *str)
399 if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
401 if (!strcmp(str, "picmg")) {
402 /* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
403 (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
404 txx9_pci_option |= TXX9_PCI_OPT_PICMG;
406 } else if (!strcmp(str, "nopicmg")) {
407 /* non-PICMG compliant backplane (TOSHIBA
408 RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
409 txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
411 } else if (!strncmp(str, "clk=", 4)) {
413 txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
414 if (strcmp(val, "33") == 0)
415 txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
416 else if (strcmp(val, "66") == 0)
417 txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
419 txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
421 } else if (!strncmp(str, "err=", 4)) {
422 if (!strcmp(str + 4, "panic"))
423 txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
424 else if (!strcmp(str + 4, "ignore"))
425 txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
429 txx9_pci_map_irq = txx9_board_vec->pci_map_irq;