1 /******************************************************************************
5 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of version 2 of the GNU General Public License as
9 * published by the Free Software Foundation.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
24 * Contact Information:
26 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27 *****************************************************************************/
28 #include <linux/slab.h>
29 #include <linux/types.h>
30 #include <linux/etherdevice.h>
31 #include <net/mac80211.h>
33 #include "iwl-eeprom.h"
38 #include "iwl-helpers.h"
40 #include "iwl-trans.h"
42 /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
43 * sending probe req. This should be set long enough to hear probe responses
44 * from more than one AP. */
45 #define IWL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */
46 #define IWL_ACTIVE_DWELL_TIME_52 (20)
48 #define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
49 #define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
51 /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
52 * Must be set longer than active dwell time.
53 * For the most reliable scan, set > AP beacon interval (typically 100msec). */
54 #define IWL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
55 #define IWL_PASSIVE_DWELL_TIME_52 (10)
56 #define IWL_PASSIVE_DWELL_BASE (100)
57 #define IWL_CHANNEL_TUNE_TIME 5
59 static int iwl_send_scan_abort(struct iwl_priv *priv)
62 struct iwl_rx_packet *pkt;
63 struct iwl_host_cmd cmd = {
64 .id = REPLY_SCAN_ABORT_CMD,
65 .flags = CMD_SYNC | CMD_WANT_SKB,
68 /* Exit instantly with error when device is not ready
69 * to receive scan abort command or it does not perform
70 * hardware scan currently */
71 if (!test_bit(STATUS_READY, &priv->status) ||
72 !test_bit(STATUS_GEO_CONFIGURED, &priv->status) ||
73 !test_bit(STATUS_SCAN_HW, &priv->status) ||
74 test_bit(STATUS_FW_ERROR, &priv->status) ||
75 test_bit(STATUS_EXIT_PENDING, &priv->status))
78 ret = trans_send_cmd(&priv->trans, &cmd);
82 pkt = (struct iwl_rx_packet *)cmd.reply_page;
83 if (pkt->u.status != CAN_ABORT_STATUS) {
84 /* The scan abort will return 1 for success or
85 * 2 for "failure". A failure condition can be
86 * due to simply not being in an active scan which
87 * can occur if we send the scan abort before we
88 * the microcode has notified us that a scan is
90 IWL_DEBUG_SCAN(priv, "SCAN_ABORT ret %d.\n", pkt->u.status);
94 iwl_free_pages(priv, cmd.reply_page);
98 static void iwl_complete_scan(struct iwl_priv *priv, bool aborted)
100 /* check if scan was requested from mac80211 */
101 if (priv->scan_request) {
102 IWL_DEBUG_SCAN(priv, "Complete scan in mac80211\n");
103 ieee80211_scan_completed(priv->hw, aborted);
106 if (priv->scan_type == IWL_SCAN_ROC) {
107 ieee80211_remain_on_channel_expired(priv->hw);
108 priv->hw_roc_channel = NULL;
109 schedule_delayed_work(&priv->hw_roc_disable_work, 10 * HZ);
112 priv->scan_type = IWL_SCAN_NORMAL;
113 priv->scan_vif = NULL;
114 priv->scan_request = NULL;
117 void iwl_force_scan_end(struct iwl_priv *priv)
119 lockdep_assert_held(&priv->mutex);
121 if (!test_bit(STATUS_SCANNING, &priv->status)) {
122 IWL_DEBUG_SCAN(priv, "Forcing scan end while not scanning\n");
126 IWL_DEBUG_SCAN(priv, "Forcing scan end\n");
127 clear_bit(STATUS_SCANNING, &priv->status);
128 clear_bit(STATUS_SCAN_HW, &priv->status);
129 clear_bit(STATUS_SCAN_ABORTING, &priv->status);
130 iwl_complete_scan(priv, true);
133 static void iwl_do_scan_abort(struct iwl_priv *priv)
137 lockdep_assert_held(&priv->mutex);
139 if (!test_bit(STATUS_SCANNING, &priv->status)) {
140 IWL_DEBUG_SCAN(priv, "Not performing scan to abort\n");
144 if (test_and_set_bit(STATUS_SCAN_ABORTING, &priv->status)) {
145 IWL_DEBUG_SCAN(priv, "Scan abort in progress\n");
149 ret = iwl_send_scan_abort(priv);
151 IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret);
152 iwl_force_scan_end(priv);
154 IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n");
158 * iwl_scan_cancel - Cancel any currently executing HW scan
160 int iwl_scan_cancel(struct iwl_priv *priv)
162 IWL_DEBUG_SCAN(priv, "Queuing abort scan\n");
163 queue_work(priv->workqueue, &priv->abort_scan);
168 * iwl_scan_cancel_timeout - Cancel any currently executing HW scan
169 * @ms: amount of time to wait (in milliseconds) for scan to abort
172 int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms)
174 unsigned long timeout = jiffies + msecs_to_jiffies(ms);
176 lockdep_assert_held(&priv->mutex);
178 IWL_DEBUG_SCAN(priv, "Scan cancel timeout\n");
180 iwl_do_scan_abort(priv);
182 while (time_before_eq(jiffies, timeout)) {
183 if (!test_bit(STATUS_SCAN_HW, &priv->status))
188 return test_bit(STATUS_SCAN_HW, &priv->status);
191 /* Service response to REPLY_SCAN_CMD (0x80) */
192 static void iwl_rx_reply_scan(struct iwl_priv *priv,
193 struct iwl_rx_mem_buffer *rxb)
195 #ifdef CONFIG_IWLWIFI_DEBUG
196 struct iwl_rx_packet *pkt = rxb_addr(rxb);
197 struct iwl_scanreq_notification *notif =
198 (struct iwl_scanreq_notification *)pkt->u.raw;
200 IWL_DEBUG_SCAN(priv, "Scan request status = 0x%x\n", notif->status);
204 /* Service SCAN_START_NOTIFICATION (0x82) */
205 static void iwl_rx_scan_start_notif(struct iwl_priv *priv,
206 struct iwl_rx_mem_buffer *rxb)
208 struct iwl_rx_packet *pkt = rxb_addr(rxb);
209 struct iwl_scanstart_notification *notif =
210 (struct iwl_scanstart_notification *)pkt->u.raw;
211 priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
212 IWL_DEBUG_SCAN(priv, "Scan start: "
214 "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
216 notif->band ? "bg" : "a",
217 le32_to_cpu(notif->tsf_high),
218 le32_to_cpu(notif->tsf_low),
219 notif->status, notif->beacon_timer);
221 if (priv->scan_type == IWL_SCAN_ROC)
222 ieee80211_ready_on_channel(priv->hw);
225 /* Service SCAN_RESULTS_NOTIFICATION (0x83) */
226 static void iwl_rx_scan_results_notif(struct iwl_priv *priv,
227 struct iwl_rx_mem_buffer *rxb)
229 #ifdef CONFIG_IWLWIFI_DEBUG
230 struct iwl_rx_packet *pkt = rxb_addr(rxb);
231 struct iwl_scanresults_notification *notif =
232 (struct iwl_scanresults_notification *)pkt->u.raw;
234 IWL_DEBUG_SCAN(priv, "Scan ch.res: "
236 "(TSF: 0x%08X:%08X) - %d "
237 "elapsed=%lu usec\n",
239 notif->band ? "bg" : "a",
240 le32_to_cpu(notif->tsf_high),
241 le32_to_cpu(notif->tsf_low),
242 le32_to_cpu(notif->statistics[0]),
243 le32_to_cpu(notif->tsf_low) - priv->scan_start_tsf);
247 /* Service SCAN_COMPLETE_NOTIFICATION (0x84) */
248 static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
249 struct iwl_rx_mem_buffer *rxb)
251 struct iwl_rx_packet *pkt = rxb_addr(rxb);
252 struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
254 IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
255 scan_notif->scanned_channels,
257 scan_notif->tsf_high, scan_notif->status);
259 /* The HW is no longer scanning */
260 clear_bit(STATUS_SCAN_HW, &priv->status);
262 IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n",
263 (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
264 jiffies_to_msecs(jiffies - priv->scan_start));
266 queue_work(priv->workqueue, &priv->scan_completed);
268 if (priv->iw_mode != NL80211_IFTYPE_ADHOC &&
269 iwl_advanced_bt_coexist(priv) &&
270 priv->bt_status != scan_notif->bt_status) {
271 if (scan_notif->bt_status) {
273 if (!priv->bt_ch_announce)
274 priv->bt_traffic_load =
275 IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
277 * otherwise, no traffic load information provided
282 priv->bt_traffic_load =
283 IWL_BT_COEX_TRAFFIC_LOAD_NONE;
285 priv->bt_status = scan_notif->bt_status;
286 queue_work(priv->workqueue, &priv->bt_traffic_change_work);
290 void iwl_setup_rx_scan_handlers(struct iwl_priv *priv)
293 priv->rx_handlers[REPLY_SCAN_CMD] = iwl_rx_reply_scan;
294 priv->rx_handlers[SCAN_START_NOTIFICATION] = iwl_rx_scan_start_notif;
295 priv->rx_handlers[SCAN_RESULTS_NOTIFICATION] =
296 iwl_rx_scan_results_notif;
297 priv->rx_handlers[SCAN_COMPLETE_NOTIFICATION] =
298 iwl_rx_scan_complete_notif;
301 inline u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
302 enum ieee80211_band band,
305 if (band == IEEE80211_BAND_5GHZ)
306 return IWL_ACTIVE_DWELL_TIME_52 +
307 IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
309 return IWL_ACTIVE_DWELL_TIME_24 +
310 IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
313 u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
314 enum ieee80211_band band,
315 struct ieee80211_vif *vif)
317 struct iwl_rxon_context *ctx;
318 u16 passive = (band == IEEE80211_BAND_2GHZ) ?
319 IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
320 IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
322 if (iwl_is_any_associated(priv)) {
324 * If we're associated, we clamp the maximum passive
325 * dwell time to be 98% of the smallest beacon interval
326 * (minus 2 * channel tune time)
328 for_each_context(priv, ctx) {
331 if (!iwl_is_associated_ctx(ctx))
333 value = ctx->vif ? ctx->vif->bss_conf.beacon_int : 0;
334 if ((value > IWL_PASSIVE_DWELL_BASE) || !value)
335 value = IWL_PASSIVE_DWELL_BASE;
336 value = (value * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
337 passive = min(value, passive);
344 void iwl_init_scan_params(struct iwl_priv *priv)
346 u8 ant_idx = fls(priv->hw_params.valid_tx_ant) - 1;
347 if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ])
348 priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx;
349 if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ])
350 priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
353 int __must_check iwl_scan_initiate(struct iwl_priv *priv,
354 struct ieee80211_vif *vif,
355 enum iwl_scan_type scan_type,
356 enum ieee80211_band band)
360 lockdep_assert_held(&priv->mutex);
362 cancel_delayed_work(&priv->scan_check);
364 if (!iwl_is_ready_rf(priv)) {
365 IWL_WARN(priv, "Request scan called when driver not ready.\n");
369 if (test_bit(STATUS_SCAN_HW, &priv->status)) {
371 "Multiple concurrent scan requests in parallel.\n");
375 if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
376 IWL_DEBUG_SCAN(priv, "Scan request while abort pending.\n");
380 IWL_DEBUG_SCAN(priv, "Starting %sscan...\n",
381 scan_type == IWL_SCAN_NORMAL ? "" :
382 scan_type == IWL_SCAN_ROC ? "remain-on-channel " :
385 set_bit(STATUS_SCANNING, &priv->status);
386 priv->scan_type = scan_type;
387 priv->scan_start = jiffies;
388 priv->scan_band = band;
390 ret = iwlagn_request_scan(priv, vif);
392 clear_bit(STATUS_SCANNING, &priv->status);
393 priv->scan_type = IWL_SCAN_NORMAL;
397 queue_delayed_work(priv->workqueue, &priv->scan_check,
398 IWL_SCAN_CHECK_WATCHDOG);
403 int iwl_mac_hw_scan(struct ieee80211_hw *hw,
404 struct ieee80211_vif *vif,
405 struct cfg80211_scan_request *req)
407 struct iwl_priv *priv = hw->priv;
410 IWL_DEBUG_MAC80211(priv, "enter\n");
412 if (req->n_channels == 0)
415 mutex_lock(&priv->mutex);
417 if (test_bit(STATUS_SCANNING, &priv->status) &&
418 priv->scan_type != IWL_SCAN_NORMAL) {
419 IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
424 /* mac80211 will only ask for one band at a time */
425 priv->scan_request = req;
426 priv->scan_vif = vif;
429 * If an internal scan is in progress, just set
430 * up the scan_request as per above.
432 if (priv->scan_type != IWL_SCAN_NORMAL) {
433 IWL_DEBUG_SCAN(priv, "SCAN request during internal scan\n");
436 ret = iwl_scan_initiate(priv, vif, IWL_SCAN_NORMAL,
437 req->channels[0]->band);
439 IWL_DEBUG_MAC80211(priv, "leave\n");
442 mutex_unlock(&priv->mutex);
448 * internal short scan, this function should only been called while associated.
449 * It will reset and tune the radio to prevent possible RF related problem
451 void iwl_internal_short_hw_scan(struct iwl_priv *priv)
453 queue_work(priv->workqueue, &priv->start_internal_scan);
456 static void iwl_bg_start_internal_scan(struct work_struct *work)
458 struct iwl_priv *priv =
459 container_of(work, struct iwl_priv, start_internal_scan);
461 IWL_DEBUG_SCAN(priv, "Start internal scan\n");
463 mutex_lock(&priv->mutex);
465 if (priv->scan_type == IWL_SCAN_RADIO_RESET) {
466 IWL_DEBUG_SCAN(priv, "Internal scan already in progress\n");
470 if (test_bit(STATUS_SCANNING, &priv->status)) {
471 IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
475 if (iwl_scan_initiate(priv, NULL, IWL_SCAN_RADIO_RESET, priv->band))
476 IWL_DEBUG_SCAN(priv, "failed to start internal short scan\n");
478 mutex_unlock(&priv->mutex);
481 static void iwl_bg_scan_check(struct work_struct *data)
483 struct iwl_priv *priv =
484 container_of(data, struct iwl_priv, scan_check.work);
486 IWL_DEBUG_SCAN(priv, "Scan check work\n");
488 /* Since we are here firmware does not finish scan and
489 * most likely is in bad shape, so we don't bother to
490 * send abort command, just force scan complete to mac80211 */
491 mutex_lock(&priv->mutex);
492 iwl_force_scan_end(priv);
493 mutex_unlock(&priv->mutex);
497 * iwl_fill_probe_req - fill in all required fields and IE for probe request
500 u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
501 const u8 *ta, const u8 *ies, int ie_len, int left)
506 /* Make sure there is enough space for the probe request,
507 * two mandatory IEs and the data */
512 frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
513 memcpy(frame->da, iwl_bcast_addr, ETH_ALEN);
514 memcpy(frame->sa, ta, ETH_ALEN);
515 memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN);
521 pos = &frame->u.probe_req.variable[0];
523 /* fill in our indirect SSID IE */
527 *pos++ = WLAN_EID_SSID;
532 if (WARN_ON(left < ie_len))
536 memcpy(pos, ies, ie_len);
543 static void iwl_bg_abort_scan(struct work_struct *work)
545 struct iwl_priv *priv = container_of(work, struct iwl_priv, abort_scan);
547 IWL_DEBUG_SCAN(priv, "Abort scan work\n");
549 /* We keep scan_check work queued in case when firmware will not
550 * report back scan completed notification */
551 mutex_lock(&priv->mutex);
552 iwl_scan_cancel_timeout(priv, 200);
553 mutex_unlock(&priv->mutex);
556 static void iwl_bg_scan_completed(struct work_struct *work)
558 struct iwl_priv *priv =
559 container_of(work, struct iwl_priv, scan_completed);
562 IWL_DEBUG_SCAN(priv, "Completed scan.\n");
564 cancel_delayed_work(&priv->scan_check);
566 mutex_lock(&priv->mutex);
568 aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &priv->status);
570 IWL_DEBUG_SCAN(priv, "Aborted scan completed.\n");
572 if (!test_and_clear_bit(STATUS_SCANNING, &priv->status)) {
573 IWL_DEBUG_SCAN(priv, "Scan already completed.\n");
577 if (priv->scan_type == IWL_SCAN_ROC) {
578 ieee80211_remain_on_channel_expired(priv->hw);
579 priv->hw_roc_channel = NULL;
580 schedule_delayed_work(&priv->hw_roc_disable_work, 10 * HZ);
583 if (priv->scan_type != IWL_SCAN_NORMAL && !aborted) {
586 /* Check if mac80211 requested scan during our internal scan */
587 if (priv->scan_request == NULL)
590 /* If so request a new scan */
591 err = iwl_scan_initiate(priv, priv->scan_vif, IWL_SCAN_NORMAL,
592 priv->scan_request->channels[0]->band);
595 "failed to initiate pending scan: %d\n", err);
604 iwl_complete_scan(priv, aborted);
607 /* Can we still talk to firmware ? */
608 if (!iwl_is_ready_rf(priv))
611 iwlagn_post_scan(priv);
614 mutex_unlock(&priv->mutex);
617 void iwl_setup_scan_deferred_work(struct iwl_priv *priv)
619 INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
620 INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
621 INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
622 INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
625 void iwl_cancel_scan_deferred_work(struct iwl_priv *priv)
627 cancel_work_sync(&priv->start_internal_scan);
628 cancel_work_sync(&priv->abort_scan);
629 cancel_work_sync(&priv->scan_completed);
631 if (cancel_delayed_work_sync(&priv->scan_check)) {
632 mutex_lock(&priv->mutex);
633 iwl_force_scan_end(priv);
634 mutex_unlock(&priv->mutex);