drivers/input/misc/da7280.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * DA7280 Haptic device driver
   4  *
   5  * Copyright (c) 2020 Dialog Semiconductor.
   6  * Author: Roy Im <[email protected]>
   7  */
   8
   9 #include <linux/bitfield.h>
  10 #include <linux/bitops.h>
  11 #include <linux/err.h>
  12 #include <linux/i2c.h>
  13 #include <linux/input.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/module.h>
  16 #include <linux/pwm.h>
  17 #include <linux/regmap.h>
  18 #include <linux/workqueue.h>
  19 #include <linux/uaccess.h>
  20
  21 /* Registers */
  22 #define DA7280_IRQ_EVENT1                       0x03
  23 #define DA7280_IRQ_EVENT_WARNING_DIAG           0x04
  24 #define DA7280_IRQ_EVENT_SEQ_DIAG               0x05
  25 #define DA7280_IRQ_STATUS1                      0x06
  26 #define DA7280_IRQ_MASK1                        0x07
  27 #define DA7280_FRQ_LRA_PER_H                    0x0A
  28 #define DA7280_FRQ_LRA_PER_L                    0x0B
  29 #define DA7280_ACTUATOR1                        0x0C
  30 #define DA7280_ACTUATOR2                        0x0D
  31 #define DA7280_ACTUATOR3                        0x0E
  32 #define DA7280_CALIB_V2I_H                      0x0F
  33 #define DA7280_CALIB_V2I_L                      0x10
  34 #define DA7280_TOP_CFG1                         0x13
  35 #define DA7280_TOP_CFG2                         0x14
  36 #define DA7280_TOP_CFG4                         0x16
  37 #define DA7280_TOP_INT_CFG1                     0x17
  38 #define DA7280_TOP_CTL1                         0x22
  39 #define DA7280_TOP_CTL2                         0x23
  40 #define DA7280_SEQ_CTL2                         0x28
  41 #define DA7280_GPI_0_CTL                        0x29
  42 #define DA7280_GPI_1_CTL                        0x2A
  43 #define DA7280_GPI_2_CTL                        0x2B
  44 #define DA7280_MEM_CTL1                         0x2C
  45 #define DA7280_MEM_CTL2                         0x2D
  46 #define DA7280_TOP_CFG5                         0x6E
  47 #define DA7280_IRQ_MASK2                        0x83
  48 #define DA7280_SNP_MEM_99                       0xE7
  49
  50 /* Register field */
  51
  52 /* DA7280_IRQ_EVENT1 (Address 0x03) */
  53 #define DA7280_E_SEQ_CONTINUE_MASK              BIT(0)
  54 #define DA7280_E_UVLO_MASK                      BIT(1)
  55 #define DA7280_E_SEQ_DONE_MASK                  BIT(2)
  56 #define DA7280_E_OVERTEMP_CRIT_MASK             BIT(3)
  57 #define DA7280_E_SEQ_FAULT_MASK                 BIT(4)
  58 #define DA7280_E_WARNING_MASK                   BIT(5)
  59 #define DA7280_E_ACTUATOR_FAULT_MASK            BIT(6)
  60 #define DA7280_E_OC_FAULT_MASK                  BIT(7)
  61
  62 /* DA7280_IRQ_EVENT_WARNING_DIAG (Address 0x04) */
  63 #define DA7280_E_OVERTEMP_WARN_MASK             BIT(3)
  64 #define DA7280_E_MEM_TYPE_MASK                  BIT(4)
  65 #define DA7280_E_LIM_DRIVE_ACC_MASK             BIT(6)
  66 #define DA7280_E_LIM_DRIVE_MASK                 BIT(7)
  67
  68 /* DA7280_IRQ_EVENT_PAT_DIAG (Address 0x05) */
  69 #define DA7280_E_PWM_FAULT_MASK                 BIT(5)
  70 #define DA7280_E_MEM_FAULT_MASK                 BIT(6)
  71 #define DA7280_E_SEQ_ID_FAULT_MASK              BIT(7)
  72
  73 /* DA7280_IRQ_STATUS1 (Address 0x06) */
  74 #define DA7280_STA_SEQ_CONTINUE_MASK            BIT(0)
  75 #define DA7280_STA_UVLO_VBAT_OK_MASK            BIT(1)
  76 #define DA7280_STA_SEQ_DONE_MASK                BIT(2)
  77 #define DA7280_STA_OVERTEMP_CRIT_MASK           BIT(3)
  78 #define DA7280_STA_SEQ_FAULT_MASK               BIT(4)
  79 #define DA7280_STA_WARNING_MASK                 BIT(5)
  80 #define DA7280_STA_ACTUATOR_MASK                BIT(6)
  81 #define DA7280_STA_OC_MASK                      BIT(7)
  82
  83 /* DA7280_IRQ_MASK1 (Address 0x07) */
  84 #define DA7280_SEQ_CONTINUE_M_MASK              BIT(0)
  85 #define DA7280_E_UVLO_M_MASK                    BIT(1)
  86 #define DA7280_SEQ_DONE_M_MASK                  BIT(2)
  87 #define DA7280_OVERTEMP_CRIT_M_MASK             BIT(3)
  88 #define DA7280_SEQ_FAULT_M_MASK                 BIT(4)
  89 #define DA7280_WARNING_M_MASK                   BIT(5)
  90 #define DA7280_ACTUATOR_M_MASK                  BIT(6)
  91 #define DA7280_OC_M_MASK                        BIT(7)
  92
  93 /* DA7280_ACTUATOR3 (Address 0x0e) */
  94 #define DA7280_IMAX_MASK                        GENMASK(4, 0)
  95
  96 /* DA7280_TOP_CFG1 (Address 0x13) */
  97 #define DA7280_AMP_PID_EN_MASK                  BIT(0)
  98 #define DA7280_RAPID_STOP_EN_MASK               BIT(1)
  99 #define DA7280_ACCELERATION_EN_MASK             BIT(2)
 100 #define DA7280_FREQ_TRACK_EN_MASK               BIT(3)
 101 #define DA7280_BEMF_SENSE_EN_MASK               BIT(4)
 102 #define DA7280_ACTUATOR_TYPE_MASK               BIT(5)
 103
 104 /* DA7280_TOP_CFG2 (Address 0x14) */
 105 #define DA7280_FULL_BRAKE_THR_MASK              GENMASK(3, 0)
 106 #define DA7280_MEM_DATA_SIGNED_MASK             BIT(4)
 107
 108 /* DA7280_TOP_CFG4 (Address 0x16) */
 109 #define DA7280_TST_CALIB_IMPEDANCE_DIS_MASK     BIT(6)
 110 #define DA7280_V2I_FACTOR_FREEZE_MASK           BIT(7)
 111
 112 /* DA7280_TOP_INT_CFG1 (Address 0x17) */
 113 #define DA7280_BEMF_FAULT_LIM_MASK              GENMASK(1, 0)
 114
 115 /* DA7280_TOP_CTL1 (Address 0x22) */
 116 #define DA7280_OPERATION_MODE_MASK              GENMASK(2, 0)
 117 #define DA7280_STANDBY_EN_MASK                  BIT(3)
 118 #define DA7280_SEQ_START_MASK                   BIT(4)
 119
 120 /* DA7280_SEQ_CTL2 (Address 0x28) */
 121 #define DA7280_PS_SEQ_ID_MASK                   GENMASK(3, 0)
 122 #define DA7280_PS_SEQ_LOOP_MASK                 GENMASK(7, 4)
 123
 124 /* DA7280_GPIO_0_CTL (Address 0x29) */
 125 #define DA7280_GPI0_POLARITY_MASK               GENMASK(1, 0)
 126 #define DA7280_GPI0_MODE_MASK                   BIT(2)
 127 #define DA7280_GPI0_SEQUENCE_ID_MASK            GENMASK(6, 3)
 128
 129 /* DA7280_GPIO_1_CTL (Address 0x2a) */
 130 #define DA7280_GPI1_POLARITY_MASK               GENMASK(1, 0)
 131 #define DA7280_GPI1_MODE_MASK                   BIT(2)
 132 #define DA7280_GPI1_SEQUENCE_ID_MASK            GENMASK(6, 3)
 133
 134 /* DA7280_GPIO_2_CTL (Address 0x2b) */
 135 #define DA7280_GPI2_POLARITY_MASK               GENMASK(1, 0)
 136 #define DA7280_GPI2_MODE_MASK                   BIT(2)
 137 #define DA7280_GPI2_SEQUENCE_ID_MASK            GENMASK(6, 3)
 138
 139 /* DA7280_MEM_CTL2 (Address 0x2d) */
 140 #define DA7280_WAV_MEM_LOCK_MASK                BIT(7)
 141
 142 /* DA7280_TOP_CFG5 (Address 0x6e) */
 143 #define DA7280_V2I_FACTOR_OFFSET_EN_MASK        BIT(0)
 144
 145 /* DA7280_IRQ_MASK2 (Address 0x83) */
 146 #define DA7280_ADC_SAT_M_MASK                   BIT(7)
 147
 148 /* Controls */
 149
 150 #define DA7280_VOLTAGE_RATE_MAX                 6000000
 151 #define DA7280_VOLTAGE_RATE_STEP                23400
 152 #define DA7280_NOMMAX_DFT                       0x6B
 153 #define DA7280_ABSMAX_DFT                       0x78
 154
 155 #define DA7280_IMPD_MAX                         1500000000
 156 #define DA7280_IMPD_DEFAULT                     22000000
 157
 158 #define DA7280_IMAX_DEFAULT                     0x0E
 159 #define DA7280_IMAX_STEP                        7200
 160 #define DA7280_IMAX_LIMIT                       252000
 161
 162 #define DA7280_RESONT_FREQH_DFT                 0x39
 163 #define DA7280_RESONT_FREQL_DFT                 0x32
 164 #define DA7280_MIN_RESONAT_FREQ_HZ              50
 165 #define DA7280_MAX_RESONAT_FREQ_HZ              300
 166
 167 #define DA7280_SEQ_ID_MAX                       15
 168 #define DA7280_SEQ_LOOP_MAX                     15
 169 #define DA7280_GPI_SEQ_ID_DFT                   0
 170 #define DA7280_GPI_SEQ_ID_MAX                   2
 171
 172 #define DA7280_SNP_MEM_SIZE                     100
 173 #define DA7280_SNP_MEM_MAX                      DA7280_SNP_MEM_99
 174
 175 #define DA7280_IRQ_NUM                          3
 176
 177 #define DA7280_SKIP_INIT                        0x100
 178
 179 #define DA7280_FF_EFFECT_COUNT_MAX              15
 180
 181 /* Maximum gain is 0x7fff for PWM mode */
 182 #define DA7280_MAX_MAGNITUDE_SHIFT              15
 183
 184 enum da7280_haptic_dev_t {
 185         DA7280_LRA      = 0,
 186         DA7280_ERM_BAR  = 1,
 187         DA7280_ERM_COIN = 2,
 188         DA7280_DEV_MAX,
 189 };
 190
 191 enum da7280_op_mode {
 192         DA7280_INACTIVE         = 0,
 193         DA7280_DRO_MODE         = 1,
 194         DA7280_PWM_MODE         = 2,
 195         DA7280_RTWM_MODE        = 3,
 196         DA7280_ETWM_MODE        = 4,
 197         DA7280_OPMODE_MAX,
 198 };
 199
 200 #define DA7280_FF_CONSTANT_DRO                  1
 201 #define DA7280_FF_PERIODIC_PWM                  2
 202 #define DA7280_FF_PERIODIC_RTWM                 1
 203 #define DA7280_FF_PERIODIC_ETWM                 2
 204
 205 #define DA7280_FF_PERIODIC_MODE                 DA7280_RTWM_MODE
 206 #define DA7280_FF_CONSTANT_MODE                 DA7280_DRO_MODE
 207
 208 enum da7280_custom_effect_param {
 209         DA7280_CUSTOM_SEQ_ID_IDX        = 0,
 210         DA7280_CUSTOM_SEQ_LOOP_IDX      = 1,
 211         DA7280_CUSTOM_DATA_LEN          = 2,
 212 };
 213
 214 enum da7280_custom_gpi_effect_param {
 215         DA7280_CUSTOM_GPI_SEQ_ID_IDX    = 0,
 216         DA7280_CUSTOM_GPI_NUM_IDX       = 2,
 217         DA7280_CUSTOM_GP_DATA_LEN       = 3,
 218 };
 219
 220 struct da7280_gpi_ctl {
 221         u8 seq_id;
 222         u8 mode;
 223         u8 polarity;
 224 };
 225
 226 struct da7280_haptic {
 227         struct regmap *regmap;
 228         struct input_dev *input_dev;
 229         struct device *dev;
 230         struct i2c_client *client;
 231         struct pwm_device *pwm_dev;
 232
 233         bool legacy;
 234         struct work_struct work;
 235         int val;
 236         u16 gain;
 237         s16 level;
 238
 239         u8 dev_type;
 240         u8 op_mode;
 241         u8 const_op_mode;
 242         u8 periodic_op_mode;
 243         u16 nommax;
 244         u16 absmax;
 245         u32 imax;
 246         u32 impd;
 247         u32 resonant_freq_h;
 248         u32 resonant_freq_l;
 249         bool bemf_sense_en;
 250         bool freq_track_en;
 251         bool acc_en;
 252         bool rapid_stop_en;
 253         bool amp_pid_en;
 254         u8 ps_seq_id;
 255         u8 ps_seq_loop;
 256         struct da7280_gpi_ctl gpi_ctl[3];
 257         bool mem_update;
 258         u8 snp_mem[DA7280_SNP_MEM_SIZE];
 259         bool active;
 260         bool suspended;
 261 };
 262
 263 static bool da7280_volatile_register(struct device *dev, unsigned int reg)
 264 {
 265         switch (reg) {
 266         case DA7280_IRQ_EVENT1:
 267         case DA7280_IRQ_EVENT_WARNING_DIAG:
 268         case DA7280_IRQ_EVENT_SEQ_DIAG:
 269         case DA7280_IRQ_STATUS1:
 270         case DA7280_TOP_CTL1:
 271                 return true;
 272         default:
 273                 return false;
 274         }
 275 }
 276
 277 static const struct regmap_config da7280_haptic_regmap_config = {
 278         .reg_bits = 8,
 279         .val_bits = 8,
 280         .max_register = DA7280_SNP_MEM_MAX,
 281         .volatile_reg = da7280_volatile_register,
 282 };
 283
 284 static int da7280_haptic_mem_update(struct da7280_haptic *haptics)
 285 {
 286         unsigned int val;
 287         int error;
 288
 289         /* The patterns should be updated when haptic is not working */
 290         error = regmap_read(haptics->regmap, DA7280_IRQ_STATUS1, &val);
 291         if (error)
 292                 return error;
 293         if (val & DA7280_STA_WARNING_MASK) {
 294                 dev_warn(haptics->dev,
 295                          "Warning! Please check HAPTIC status.\n");
 296                 return -EBUSY;
 297         }
 298
 299         /* Patterns are not updated if the lock bit is enabled */
 300         val = 0;
 301         error = regmap_read(haptics->regmap, DA7280_MEM_CTL2, &val);
 302         if (error)
 303                 return error;
 304         if (~val & DA7280_WAV_MEM_LOCK_MASK) {
 305                 dev_warn(haptics->dev, "Please unlock the bit first\n");
 306                 return -EACCES;
 307         }
 308
 309         /* Set to Inactive mode to make sure safety */
 310         error = regmap_update_bits(haptics->regmap,
 311                                    DA7280_TOP_CTL1,
 312                                    DA7280_OPERATION_MODE_MASK,
 313                                    0);
 314         if (error)
 315                 return error;
 316
 317         error = regmap_read(haptics->regmap, DA7280_MEM_CTL1, &val);
 318         if (error)
 319                 return error;
 320
 321         return regmap_bulk_write(haptics->regmap, val, haptics->snp_mem,
 322                                  DA7280_SNP_MEM_MAX - val + 1);
 323 }
 324
 325 static int da7280_haptic_set_pwm(struct da7280_haptic *haptics, bool enabled)
 326 {
 327         struct pwm_state state;
 328         u64 period_mag_multi;
 329         int error;
 330
 331         if (!haptics->gain && enabled) {
 332                 dev_err(haptics->dev, "Unable to enable pwm with 0 gain\n");
 333                 return -EINVAL;
 334         }
 335
 336         pwm_get_state(haptics->pwm_dev, &state);
 337         state.enabled = enabled;
 338         if (enabled) {
 339                 period_mag_multi = (u64)state.period * haptics->gain;
 340                 period_mag_multi >>= DA7280_MAX_MAGNITUDE_SHIFT;
 341
 342                 /*
 343                  * The interpretation of duty cycle depends on the acc_en,
 344                  * it should be between 50% and 100% for acc_en = 0.
 345                  * See datasheet 'PWM mode' section.
 346                  */
 347                 if (!haptics->acc_en) {
 348                         period_mag_multi += state.period;
 349                         period_mag_multi /= 2;
 350                 }
 351
 352                 state.duty_cycle = period_mag_multi;
 353         }
 354
 355         error = pwm_apply_state(haptics->pwm_dev, &state);
 356         if (error)
 357                 dev_err(haptics->dev, "Failed to apply pwm state: %d\n", error);
 358
 359         return error;
 360 }
 361
 362 static void da7280_haptic_activate(struct da7280_haptic *haptics)
 363 {
 364         int error;
 365
 366         if (haptics->active)
 367                 return;
 368
 369         switch (haptics->op_mode) {
 370         case DA7280_DRO_MODE:
 371                 /* the valid range check when acc_en is enabled */
 372                 if (haptics->acc_en && haptics->level > 0x7F)
 373                         haptics->level = 0x7F;
 374                 else if (haptics->level > 0xFF)
 375                         haptics->level = 0xFF;
 376
 377                 /* Set level as a % of ACTUATOR_NOMMAX (nommax) */
 378                 error = regmap_write(haptics->regmap, DA7280_TOP_CTL2,
 379                                      haptics->level);
 380                 if (error) {
 381                         dev_err(haptics->dev,
 382                                 "Failed to set level to %d: %d\n",
 383                                 haptics->level, error);
 384                         return;
 385                 }
 386                 break;
 387
 388         case DA7280_PWM_MODE:
 389                 if (da7280_haptic_set_pwm(haptics, true))
 390                         return;
 391                 break;
 392
 393         case DA7280_RTWM_MODE:
 394                 /*
 395                  * The pattern will be played by the PS_SEQ_ID and the
 396                  * PS_SEQ_LOOP
 397                  */
 398                 break;
 399
 400         case DA7280_ETWM_MODE:
 401                 /*
 402                  * The pattern will be played by the GPI[N] state,
 403                  * GPI(N)_SEQUENCE_ID and the PS_SEQ_LOOP. See the
 404                  * datasheet for the details.
 405                  */
 406                 break;
 407
 408         default:
 409                 dev_err(haptics->dev, "Invalid op mode %d\n", haptics->op_mode);
 410                 return;
 411         }
 412
 413         error = regmap_update_bits(haptics->regmap,
 414                                    DA7280_TOP_CTL1,
 415                                    DA7280_OPERATION_MODE_MASK,
 416                                    haptics->op_mode);
 417         if (error) {
 418                 dev_err(haptics->dev,
 419                         "Failed to set operation mode: %d", error);
 420                 return;
 421         }
 422
 423         if (haptics->op_mode == DA7280_PWM_MODE ||
 424             haptics->op_mode == DA7280_RTWM_MODE) {
 425                 error = regmap_update_bits(haptics->regmap,
 426                                            DA7280_TOP_CTL1,
 427                                            DA7280_SEQ_START_MASK,
 428                                            DA7280_SEQ_START_MASK);
 429                 if (error) {
 430                         dev_err(haptics->dev,
 431                                 "Failed to start sequence: %d\n", error);
 432                         return;
 433                 }
 434         }
 435
 436         haptics->active = true;
 437 }
 438
 439 static void da7280_haptic_deactivate(struct da7280_haptic *haptics)
 440 {
 441         int error;
 442
 443         if (!haptics->active)
 444                 return;
 445
 446         /* Set to Inactive mode */
 447         error = regmap_update_bits(haptics->regmap,
 448                                    DA7280_TOP_CTL1,
 449                                    DA7280_OPERATION_MODE_MASK, 0);
 450         if (error) {
 451                 dev_err(haptics->dev,
 452                         "Failed to clear operation mode: %d", error);
 453                 return;
 454         }
 455
 456         switch (haptics->op_mode) {
 457         case DA7280_DRO_MODE:
 458                 error = regmap_write(haptics->regmap,
 459                                      DA7280_TOP_CTL2, 0);
 460                 if (error) {
 461                         dev_err(haptics->dev,
 462                                 "Failed to disable DRO mode: %d\n", error);
 463                         return;
 464                 }
 465                 break;
 466
 467         case DA7280_PWM_MODE:
 468                 if (da7280_haptic_set_pwm(haptics, false))
 469                         return;
 470                 break;
 471
 472         case DA7280_RTWM_MODE:
 473         case DA7280_ETWM_MODE:
 474                 error = regmap_update_bits(haptics->regmap,
 475                                            DA7280_TOP_CTL1,
 476                                            DA7280_SEQ_START_MASK, 0);
 477                 if (error) {
 478                         dev_err(haptics->dev,
 479                                 "Failed to disable RTWM/ETWM mode: %d\n",
 480                                 error);
 481                         return;
 482                 }
 483                 break;
 484
 485         default:
 486                 dev_err(haptics->dev, "Invalid op mode %d\n", haptics->op_mode);
 487                 return;
 488         }
 489
 490         haptics->active = false;
 491 }
 492
 493 static void da7280_haptic_work(struct work_struct *work)
 494 {
 495         struct da7280_haptic *haptics =
 496                 container_of(work, struct da7280_haptic, work);
 497         int val = haptics->val;
 498
 499         if (val)
 500                 da7280_haptic_activate(haptics);
 501         else
 502                 da7280_haptic_deactivate(haptics);
 503 }
 504
 505 static int da7280_haptics_upload_effect(struct input_dev *dev,
 506                                         struct ff_effect *effect,
 507                                         struct ff_effect *old)
 508 {
 509         struct da7280_haptic *haptics = input_get_drvdata(dev);
 510         s16 data[DA7280_SNP_MEM_SIZE] = { 0 };
 511         unsigned int val;
 512         int tmp, i, num;
 513         int error;
 514
 515         /* The effect should be uploaded when haptic is not working */
 516         if (haptics->active)
 517                 return -EBUSY;
 518
 519         switch (effect->type) {
 520         /* DRO/PWM modes support this type */
 521         case FF_CONSTANT:
 522                 haptics->op_mode = haptics->const_op_mode;
 523                 if (haptics->op_mode == DA7280_DRO_MODE) {
 524                         tmp = effect->u.constant.level * 254;
 525                         haptics->level = tmp / 0x7FFF;
 526                         break;
 527                 }
 528
 529                 haptics->gain = effect->u.constant.level <= 0 ?
 530                                         0 : effect->u.constant.level;
 531                 break;
 532
 533         /* RTWM/ETWM modes support this type */
 534         case FF_PERIODIC:
 535                 if (effect->u.periodic.waveform != FF_CUSTOM) {
 536                         dev_err(haptics->dev,
 537                                 "Device can only accept FF_CUSTOM waveform\n");
 538                         return -EINVAL;
 539                 }
 540
 541                 /*
 542                  * Load the data and check the length.
 543                  * the data will be patterns in this case: 4 < X <= 100,
 544                  * and will be saved into the waveform memory inside DA728x.
 545                  * If X = 2, the data will be PS_SEQ_ID and PS_SEQ_LOOP.
 546                  * If X = 3, the 1st data will be GPIX_SEQUENCE_ID .
 547                  */
 548                 if (effect->u.periodic.custom_len == DA7280_CUSTOM_DATA_LEN)
 549                         goto set_seq_id_loop;
 550
 551                 if (effect->u.periodic.custom_len == DA7280_CUSTOM_GP_DATA_LEN)
 552                         goto set_gpix_seq_id;
 553
 554                 if (effect->u.periodic.custom_len < DA7280_CUSTOM_DATA_LEN ||
 555                     effect->u.periodic.custom_len > DA7280_SNP_MEM_SIZE) {
 556                         dev_err(haptics->dev, "Invalid waveform data size\n");
 557                         return -EINVAL;
 558                 }
 559
 560                 if (copy_from_user(data, effect->u.periodic.custom_data,
 561                                    sizeof(s16) *
 562                                    effect->u.periodic.custom_len))
 563                         return -EFAULT;
 564
 565                 memset(haptics->snp_mem, 0, DA7280_SNP_MEM_SIZE);
 566
 567                 for (i = 0; i < effect->u.periodic.custom_len; i++) {
 568                         if (data[i] < 0 || data[i] > 0xff) {
 569                                 dev_err(haptics->dev,
 570                                         "Invalid waveform data %d at offset %d\n",
 571                                         data[i], i);
 572                                 return -EINVAL;
 573                         }
 574                         haptics->snp_mem[i] = (u8)data[i];
 575                 }
 576
 577                 error = da7280_haptic_mem_update(haptics);
 578                 if (error) {
 579                         dev_err(haptics->dev,
 580                                 "Failed to upload waveform: %d\n", error);
 581                         return error;
 582                 }
 583                 break;
 584
 585 set_seq_id_loop:
 586                 if (copy_from_user(data, effect->u.periodic.custom_data,
 587                                    sizeof(s16) * DA7280_CUSTOM_DATA_LEN))
 588                         return -EFAULT;
 589
 590                 if (data[DA7280_CUSTOM_SEQ_ID_IDX] < 0 ||
 591                     data[DA7280_CUSTOM_SEQ_ID_IDX] > DA7280_SEQ_ID_MAX ||
 592                     data[DA7280_CUSTOM_SEQ_LOOP_IDX] < 0 ||
 593                     data[DA7280_CUSTOM_SEQ_LOOP_IDX] > DA7280_SEQ_LOOP_MAX) {
 594                         dev_err(haptics->dev,
 595                                 "Invalid custom id (%d) or loop (%d)\n",
 596                                 data[DA7280_CUSTOM_SEQ_ID_IDX],
 597                                 data[DA7280_CUSTOM_SEQ_LOOP_IDX]);
 598                         return -EINVAL;
 599                 }
 600
 601                 haptics->ps_seq_id = data[DA7280_CUSTOM_SEQ_ID_IDX] & 0x0f;
 602                 haptics->ps_seq_loop = data[DA7280_CUSTOM_SEQ_LOOP_IDX] & 0x0f;
 603                 haptics->op_mode = haptics->periodic_op_mode;
 604
 605                 val = FIELD_PREP(DA7280_PS_SEQ_ID_MASK, haptics->ps_seq_id) |
 606                         FIELD_PREP(DA7280_PS_SEQ_LOOP_MASK,
 607                                    haptics->ps_seq_loop);
 608                 error = regmap_write(haptics->regmap, DA7280_SEQ_CTL2, val);
 609                 if (error) {
 610                         dev_err(haptics->dev,
 611                                 "Failed to update PS sequence: %d\n", error);
 612                         return error;
 613                 }
 614                 break;
 615
 616 set_gpix_seq_id:
 617                 if (copy_from_user(data, effect->u.periodic.custom_data,
 618                                    sizeof(s16) * DA7280_CUSTOM_GP_DATA_LEN))
 619                         return -EFAULT;
 620
 621                 if (data[DA7280_CUSTOM_GPI_SEQ_ID_IDX] < 0 ||
 622                     data[DA7280_CUSTOM_GPI_SEQ_ID_IDX] > DA7280_SEQ_ID_MAX ||
 623                     data[DA7280_CUSTOM_GPI_NUM_IDX] < 0 ||
 624                     data[DA7280_CUSTOM_GPI_NUM_IDX] > DA7280_GPI_SEQ_ID_MAX) {
 625                         dev_err(haptics->dev,
 626                                 "Invalid custom GPI id (%d) or num (%d)\n",
 627                                 data[DA7280_CUSTOM_GPI_SEQ_ID_IDX],
 628                                 data[DA7280_CUSTOM_GPI_NUM_IDX]);
 629                         return -EINVAL;
 630                 }
 631
 632                 num = data[DA7280_CUSTOM_GPI_NUM_IDX] & 0x0f;
 633                 haptics->gpi_ctl[num].seq_id =
 634                         data[DA7280_CUSTOM_GPI_SEQ_ID_IDX] & 0x0f;
 635                 haptics->op_mode = haptics->periodic_op_mode;
 636
 637                 val = FIELD_PREP(DA7280_GPI0_SEQUENCE_ID_MASK,
 638                                  haptics->gpi_ctl[num].seq_id);
 639                 error = regmap_update_bits(haptics->regmap,
 640                                            DA7280_GPI_0_CTL + num,
 641                                            DA7280_GPI0_SEQUENCE_ID_MASK,
 642                                            val);
 643                 if (error) {
 644                         dev_err(haptics->dev,
 645                                 "Failed to update GPI sequence: %d\n", error);
 646                         return error;
 647                 }
 648                 break;
 649
 650         default:
 651                 dev_err(haptics->dev, "Unsupported effect type: %d\n",
 652                         effect->type);
 653                 return -EINVAL;
 654         }
 655
 656         return 0;
 657 }
 658
 659 static int da7280_haptics_playback(struct input_dev *dev,
 660                                    int effect_id, int val)
 661 {
 662         struct da7280_haptic *haptics = input_get_drvdata(dev);
 663
 664         if (!haptics->op_mode) {
 665                 dev_warn(haptics->dev, "No effects have been uploaded\n");
 666                 return -EINVAL;
 667         }
 668
 669         if (likely(!haptics->suspended)) {
 670                 haptics->val = val;
 671                 schedule_work(&haptics->work);
 672         }
 673
 674         return 0;
 675 }
 676
 677 static int da7280_haptic_start(struct da7280_haptic *haptics)
 678 {
 679         int error;
 680
 681         error = regmap_update_bits(haptics->regmap,
 682                                    DA7280_TOP_CTL1,
 683                                    DA7280_STANDBY_EN_MASK,
 684                                    DA7280_STANDBY_EN_MASK);
 685         if (error) {
 686                 dev_err(haptics->dev, "Unable to enable device: %d\n", error);
 687                 return error;
 688         }
 689
 690         return 0;
 691 }
 692
 693 static void da7280_haptic_stop(struct da7280_haptic *haptics)
 694 {
 695         int error;
 696
 697         cancel_work_sync(&haptics->work);
 698
 699
 700         da7280_haptic_deactivate(haptics);
 701
 702         error = regmap_update_bits(haptics->regmap, DA7280_TOP_CTL1,
 703                                    DA7280_STANDBY_EN_MASK, 0);
 704         if (error)
 705                 dev_err(haptics->dev, "Failed to disable device: %d\n", error);
 706 }
 707
 708 static int da7280_haptic_open(struct input_dev *dev)
 709 {
 710         struct da7280_haptic *haptics = input_get_drvdata(dev);
 711
 712         return da7280_haptic_start(haptics);
 713 }
 714
 715 static void da7280_haptic_close(struct input_dev *dev)
 716 {
 717         struct da7280_haptic *haptics = input_get_drvdata(dev);
 718
 719         da7280_haptic_stop(haptics);
 720 }
 721
 722 static u8 da7280_haptic_of_mode_str(struct device *dev,
 723                                     const char *str)
 724 {
 725         if (!strcmp(str, "LRA")) {
 726                 return DA7280_LRA;
 727         } else if (!strcmp(str, "ERM-bar")) {
 728                 return DA7280_ERM_BAR;
 729         } else if (!strcmp(str, "ERM-coin")) {
 730                 return DA7280_ERM_COIN;
 731         } else {
 732                 dev_warn(dev, "Invalid string - set to LRA\n");
 733                 return DA7280_LRA;
 734         }
 735 }
 736
 737 static u8 da7280_haptic_of_gpi_mode_str(struct device *dev,
 738                                         const char *str)
 739 {
 740         if (!strcmp(str, "Single-pattern")) {
 741                 return 0;
 742         } else if (!strcmp(str, "Multi-pattern")) {
 743                 return 1;
 744         } else {
 745                 dev_warn(dev, "Invalid string - set to Single-pattern\n");
 746                 return 0;
 747         }
 748 }
 749
 750 static u8 da7280_haptic_of_gpi_pol_str(struct device *dev,
 751                                        const char *str)
 752 {
 753         if (!strcmp(str, "Rising-edge")) {
 754                 return 0;
 755         } else if (!strcmp(str, "Falling-edge")) {
 756                 return 1;
 757         } else if (!strcmp(str, "Both-edge")) {
 758                 return 2;
 759         } else {
 760                 dev_warn(dev, "Invalid string - set to Rising-edge\n");
 761                 return 0;
 762         }
 763 }
 764
 765 static u8 da7280_haptic_of_volt_rating_set(u32 val)
 766 {
 767         u32 voltage = val / DA7280_VOLTAGE_RATE_STEP + 1;
 768
 769         return min_t(u32, voltage, 0xff);
 770 }
 771
 772 static void da7280_parse_properties(struct device *dev,
 773                                     struct da7280_haptic *haptics)
 774 {
 775         unsigned int i, mem[DA7280_SNP_MEM_SIZE];
 776         char gpi_str1[] = "dlg,gpi0-seq-id";
 777         char gpi_str2[] = "dlg,gpi0-mode";
 778         char gpi_str3[] = "dlg,gpi0-polarity";
 779         const char *str;
 780         u32 val;
 781         int error;
 782
 783         /*
 784          * If there is no property, then use the mode programmed into the chip.
 785          */
 786         haptics->dev_type = DA7280_DEV_MAX;
 787         error = device_property_read_string(dev, "dlg,actuator-type", &str);
 788         if (!error)
 789                 haptics->dev_type = da7280_haptic_of_mode_str(dev, str);
 790
 791         haptics->const_op_mode = DA7280_DRO_MODE;
 792         error = device_property_read_u32(dev, "dlg,const-op-mode", &val);
 793         if (!error && val == DA7280_FF_PERIODIC_PWM)
 794                 haptics->const_op_mode = DA7280_PWM_MODE;
 795
 796         haptics->periodic_op_mode = DA7280_RTWM_MODE;
 797         error = device_property_read_u32(dev, "dlg,periodic-op-mode", &val);
 798         if (!error && val == DA7280_FF_PERIODIC_ETWM)
 799                 haptics->periodic_op_mode = DA7280_ETWM_MODE;
 800
 801         haptics->nommax = DA7280_SKIP_INIT;
 802         error = device_property_read_u32(dev, "dlg,nom-microvolt", &val);
 803         if (!error && val < DA7280_VOLTAGE_RATE_MAX)
 804                 haptics->nommax = da7280_haptic_of_volt_rating_set(val);
 805
 806         haptics->absmax = DA7280_SKIP_INIT;
 807         error = device_property_read_u32(dev, "dlg,abs-max-microvolt", &val);
 808         if (!error && val < DA7280_VOLTAGE_RATE_MAX)
 809                 haptics->absmax = da7280_haptic_of_volt_rating_set(val);
 810
 811         haptics->imax = DA7280_IMAX_DEFAULT;
 812         error = device_property_read_u32(dev, "dlg,imax-microamp", &val);
 813         if (!error && val < DA7280_IMAX_LIMIT)
 814                 haptics->imax = (val - 28600) / DA7280_IMAX_STEP + 1;
 815
 816         haptics->impd = DA7280_IMPD_DEFAULT;
 817         error = device_property_read_u32(dev, "dlg,impd-micro-ohms", &val);
 818         if (!error && val <= DA7280_IMPD_MAX)
 819                 haptics->impd = val;
 820
 821         haptics->resonant_freq_h = DA7280_SKIP_INIT;
 822         haptics->resonant_freq_l = DA7280_SKIP_INIT;
 823         error = device_property_read_u32(dev, "dlg,resonant-freq-hz", &val);
 824         if (!error) {
 825                 if (val < DA7280_MAX_RESONAT_FREQ_HZ &&
 826                     val > DA7280_MIN_RESONAT_FREQ_HZ) {
 827                         haptics->resonant_freq_h =
 828                                 ((1000000000 / (val * 1333)) >> 7) & 0xFF;
 829                         haptics->resonant_freq_l =
 830                                 (1000000000 / (val * 1333)) & 0x7F;
 831                 } else {
 832                         haptics->resonant_freq_h = DA7280_RESONT_FREQH_DFT;
 833                         haptics->resonant_freq_l = DA7280_RESONT_FREQL_DFT;
 834                 }
 835         }
 836
 837         /* If no property, set to zero as default is to do nothing. */
 838         haptics->ps_seq_id = 0;
 839         error = device_property_read_u32(dev, "dlg,ps-seq-id", &val);
 840         if (!error && val <= DA7280_SEQ_ID_MAX)
 841                 haptics->ps_seq_id = val;
 842
 843         haptics->ps_seq_loop = 0;
 844         error = device_property_read_u32(dev, "dlg,ps-seq-loop", &val);
 845         if (!error && val <= DA7280_SEQ_LOOP_MAX)
 846                 haptics->ps_seq_loop = val;
 847
 848         /* GPI0~2 Control */
 849         for (i = 0; i <= DA7280_GPI_SEQ_ID_MAX; i++) {
 850                 gpi_str1[7] = '0' + i;
 851                 haptics->gpi_ctl[i].seq_id = DA7280_GPI_SEQ_ID_DFT + i;
 852                 error = device_property_read_u32 (dev, gpi_str1, &val);
 853                 if (!error && val <= DA7280_SEQ_ID_MAX)
 854                         haptics->gpi_ctl[i].seq_id = val;
 855
 856                 gpi_str2[7] = '0' + i;
 857                 haptics->gpi_ctl[i].mode = 0;
 858                 error = device_property_read_string(dev, gpi_str2, &str);
 859                 if (!error)
 860                         haptics->gpi_ctl[i].mode =
 861                                 da7280_haptic_of_gpi_mode_str(dev, str);
 862
 863                 gpi_str3[7] = '0' + i;
 864                 haptics->gpi_ctl[i].polarity = 0;
 865                 error = device_property_read_string(dev, gpi_str3, &str);
 866                 if (!error)
 867                         haptics->gpi_ctl[i].polarity =
 868                                 da7280_haptic_of_gpi_pol_str(dev, str);
 869         }
 870
 871         haptics->bemf_sense_en =
 872                 device_property_read_bool(dev, "dlg,bemf-sens-enable");
 873         haptics->freq_track_en =
 874                 device_property_read_bool(dev, "dlg,freq-track-enable");
 875         haptics->acc_en =
 876                 device_property_read_bool(dev, "dlg,acc-enable");
 877         haptics->rapid_stop_en =
 878                 device_property_read_bool(dev, "dlg,rapid-stop-enable");
 879         haptics->amp_pid_en =
 880                 device_property_read_bool(dev, "dlg,amp-pid-enable");
 881
 882         haptics->mem_update = false;
 883         error = device_property_read_u32_array(dev, "dlg,mem-array",
 884                                                &mem[0], DA7280_SNP_MEM_SIZE);
 885         if (!error) {
 886                 haptics->mem_update = true;
 887                 memset(haptics->snp_mem, 0, DA7280_SNP_MEM_SIZE);
 888                 for (i = 0; i < DA7280_SNP_MEM_SIZE; i++) {
 889                         if (mem[i] <= 0xff) {
 890                                 haptics->snp_mem[i] = (u8)mem[i];
 891                         } else {
 892                                 dev_err(haptics->dev,
 893                                         "Invalid data in mem-array at %d: %x\n",
 894                                         i, mem[i]);
 895                                 haptics->mem_update = false;
 896                                 break;
 897                         }
 898                 }
 899         }
 900 }
 901
 902 static irqreturn_t da7280_irq_handler(int irq, void *data)
 903 {
 904         struct da7280_haptic *haptics = data;
 905         struct device *dev = haptics->dev;
 906         u8 events[DA7280_IRQ_NUM];
 907         int error;
 908
 909         /* Check what events have happened */
 910         error = regmap_bulk_read(haptics->regmap, DA7280_IRQ_EVENT1,
 911                                  events, sizeof(events));
 912         if (error) {
 913                 dev_err(dev, "failed to read interrupt data: %d\n", error);
 914                 goto out;
 915         }
 916
 917         /* Clear events */
 918         error = regmap_write(haptics->regmap, DA7280_IRQ_EVENT1, events[0]);
 919         if (error) {
 920                 dev_err(dev, "failed to clear interrupts: %d\n", error);
 921                 goto out;
 922         }
 923
 924         if (events[0] & DA7280_E_SEQ_FAULT_MASK) {
 925                 /*
 926                  * Stop first if haptic is active, otherwise, the fault may
 927                  * happen continually even though the bit is cleared.
 928                  */
 929                 error = regmap_update_bits(haptics->regmap, DA7280_TOP_CTL1,
 930                                            DA7280_OPERATION_MODE_MASK, 0);
 931                 if (error)
 932                         dev_err(dev, "failed to clear op mode on fault: %d\n",
 933                                 error);
 934         }
 935
 936         if (events[0] & DA7280_E_SEQ_DONE_MASK)
 937                 haptics->active = false;
 938
 939         if (events[0] & DA7280_E_WARNING_MASK) {
 940                 if (events[1] & DA7280_E_LIM_DRIVE_MASK ||
 941                     events[1] & DA7280_E_LIM_DRIVE_ACC_MASK)
 942                         dev_warn(dev, "Please reduce the driver level\n");
 943                 if (events[1] & DA7280_E_MEM_TYPE_MASK)
 944                         dev_warn(dev, "Please check the mem data format\n");
 945                 if (events[1] & DA7280_E_OVERTEMP_WARN_MASK)
 946                         dev_warn(dev, "Over-temperature warning\n");
 947         }
 948
 949         if (events[0] & DA7280_E_SEQ_FAULT_MASK) {
 950                 if (events[2] & DA7280_E_SEQ_ID_FAULT_MASK)
 951                         dev_info(dev, "Please reload PS_SEQ_ID & mem data\n");
 952                 if (events[2] & DA7280_E_MEM_FAULT_MASK)
 953                         dev_info(dev, "Please reload the mem data\n");
 954                 if (events[2] & DA7280_E_PWM_FAULT_MASK)
 955                         dev_info(dev, "Please restart PWM interface\n");
 956         }
 957
 958 out:
 959         return IRQ_HANDLED;
 960 }
 961
 962 static int da7280_init(struct da7280_haptic *haptics)
 963 {
 964         unsigned int val = 0;
 965         u32 v2i_factor;
 966         int error, i;
 967         u8 mask = 0;
 968
 969         /*
 970          * If device type is DA7280_DEV_MAX then simply use currently
 971          * programmed mode.
 972          */
 973         if (haptics->dev_type == DA7280_DEV_MAX) {
 974                 error = regmap_read(haptics->regmap, DA7280_TOP_CFG1, &val);
 975                 if (error)
 976                         goto out_err;
 977
 978                 haptics->dev_type = val & DA7280_ACTUATOR_TYPE_MASK ?
 979                                         DA7280_ERM_COIN : DA7280_LRA;
 980         }
 981
 982         /* Apply user settings */
 983         if (haptics->dev_type == DA7280_LRA &&
 984             haptics->resonant_freq_l != DA7280_SKIP_INIT) {
 985                 error = regmap_write(haptics->regmap, DA7280_FRQ_LRA_PER_H,
 986                                      haptics->resonant_freq_h);
 987                 if (error)
 988                         goto out_err;
 989                 error = regmap_write(haptics->regmap, DA7280_FRQ_LRA_PER_L,
 990                                      haptics->resonant_freq_l);
 991                 if (error)
 992                         goto out_err;
 993         } else if (haptics->dev_type == DA7280_ERM_COIN) {
 994                 error = regmap_update_bits(haptics->regmap, DA7280_TOP_INT_CFG1,
 995                                            DA7280_BEMF_FAULT_LIM_MASK, 0);
 996                 if (error)
 997                         goto out_err;
 998
 999                 mask = DA7280_TST_CALIB_IMPEDANCE_DIS_MASK |
1000                         DA7280_V2I_FACTOR_FREEZE_MASK;
1001                 val = DA7280_TST_CALIB_IMPEDANCE_DIS_MASK |
1002                         DA7280_V2I_FACTOR_FREEZE_MASK;
1003                 error = regmap_update_bits(haptics->regmap, DA7280_TOP_CFG4,
1004                                            mask, val);
1005                 if (error)
1006                         goto out_err;
1007
1008                 haptics->acc_en = false;
1009                 haptics->rapid_stop_en = false;
1010                 haptics->amp_pid_en = false;
1011         }
1012
1013         mask = DA7280_ACTUATOR_TYPE_MASK |
1014                         DA7280_BEMF_SENSE_EN_MASK |
1015                         DA7280_FREQ_TRACK_EN_MASK |
1016                         DA7280_ACCELERATION_EN_MASK |
1017                         DA7280_RAPID_STOP_EN_MASK |
1018                         DA7280_AMP_PID_EN_MASK;
1019         val = FIELD_PREP(DA7280_ACTUATOR_TYPE_MASK,
1020                          (haptics->dev_type ? 1 : 0)) |
1021                 FIELD_PREP(DA7280_BEMF_SENSE_EN_MASK,
1022                            (haptics->bemf_sense_en ? 1 : 0)) |
1023                 FIELD_PREP(DA7280_FREQ_TRACK_EN_MASK,
1024                            (haptics->freq_track_en ? 1 : 0)) |
1025                 FIELD_PREP(DA7280_ACCELERATION_EN_MASK,
1026                            (haptics->acc_en ? 1 : 0)) |
1027                 FIELD_PREP(DA7280_RAPID_STOP_EN_MASK,
1028                            (haptics->rapid_stop_en ? 1 : 0)) |
1029                 FIELD_PREP(DA7280_AMP_PID_EN_MASK,
1030                            (haptics->amp_pid_en ? 1 : 0));
1031
1032         error = regmap_update_bits(haptics->regmap, DA7280_TOP_CFG1, mask, val);
1033         if (error)
1034                 goto out_err;
1035
1036         error = regmap_update_bits(haptics->regmap, DA7280_TOP_CFG5,
1037                                    DA7280_V2I_FACTOR_OFFSET_EN_MASK,
1038                                    haptics->acc_en ?
1039                                         DA7280_V2I_FACTOR_OFFSET_EN_MASK : 0);
1040         if (error)
1041                 goto out_err;
1042
1043         error = regmap_update_bits(haptics->regmap,
1044                                    DA7280_TOP_CFG2,
1045                                    DA7280_MEM_DATA_SIGNED_MASK,
1046                                    haptics->acc_en ?
1047                                         0 : DA7280_MEM_DATA_SIGNED_MASK);
1048         if (error)
1049                 goto out_err;
1050
1051         if (haptics->nommax != DA7280_SKIP_INIT) {
1052                 error = regmap_write(haptics->regmap, DA7280_ACTUATOR1,
1053                                      haptics->nommax);
1054                 if (error)
1055                         goto out_err;
1056         }
1057
1058         if (haptics->absmax != DA7280_SKIP_INIT) {
1059                 error = regmap_write(haptics->regmap, DA7280_ACTUATOR2,
1060                                      haptics->absmax);
1061                 if (error)
1062                         goto out_err;
1063         }
1064
1065         error = regmap_update_bits(haptics->regmap, DA7280_ACTUATOR3,
1066                                    DA7280_IMAX_MASK, haptics->imax);
1067         if (error)
1068                 goto out_err;
1069
1070         v2i_factor = haptics->impd * (haptics->imax + 4) / 1610400;
1071         error = regmap_write(haptics->regmap, DA7280_CALIB_V2I_L,
1072                              v2i_factor & 0xff);
1073         if (error)
1074                 goto out_err;
1075         error = regmap_write(haptics->regmap, DA7280_CALIB_V2I_H,
1076                              v2i_factor >> 8);
1077         if (error)
1078                 goto out_err;
1079
1080         error = regmap_update_bits(haptics->regmap,
1081                                    DA7280_TOP_CTL1,
1082                                    DA7280_STANDBY_EN_MASK,
1083                                    DA7280_STANDBY_EN_MASK);
1084         if (error)
1085                 goto out_err;
1086
1087         if (haptics->mem_update) {
1088                 error = da7280_haptic_mem_update(haptics);
1089                 if (error)
1090                         goto out_err;
1091         }
1092
1093         /* Set  PS_SEQ_ID and PS_SEQ_LOOP */
1094         val = FIELD_PREP(DA7280_PS_SEQ_ID_MASK, haptics->ps_seq_id) |
1095                 FIELD_PREP(DA7280_PS_SEQ_LOOP_MASK, haptics->ps_seq_loop);
1096         error = regmap_write(haptics->regmap, DA7280_SEQ_CTL2, val);
1097         if (error)
1098                 goto out_err;
1099
1100         /* GPI(N) CTL */
1101         for (i = 0; i < 3; i++) {
1102                 val = FIELD_PREP(DA7280_GPI0_SEQUENCE_ID_MASK,
1103                                  haptics->gpi_ctl[i].seq_id) |
1104                         FIELD_PREP(DA7280_GPI0_MODE_MASK,
1105                                    haptics->gpi_ctl[i].mode) |
1106                         FIELD_PREP(DA7280_GPI0_POLARITY_MASK,
1107                                    haptics->gpi_ctl[i].polarity);
1108                 error = regmap_write(haptics->regmap,
1109                                      DA7280_GPI_0_CTL + i, val);
1110                 if (error)
1111                         goto out_err;
1112         }
1113
1114         /* Mask ADC_SAT_M bit as default */
1115         error = regmap_update_bits(haptics->regmap,
1116                                    DA7280_IRQ_MASK2,
1117                                    DA7280_ADC_SAT_M_MASK,
1118                                    DA7280_ADC_SAT_M_MASK);
1119         if (error)
1120                 goto out_err;
1121
1122         /* Clear Interrupts */
1123         error = regmap_write(haptics->regmap, DA7280_IRQ_EVENT1, 0xff);
1124         if (error)
1125                 goto out_err;
1126
1127         error = regmap_update_bits(haptics->regmap,
1128                                    DA7280_IRQ_MASK1,
1129                                    DA7280_SEQ_FAULT_M_MASK |
1130                                         DA7280_SEQ_DONE_M_MASK,
1131                                    0);
1132         if (error)
1133                 goto out_err;
1134
1135         haptics->active = false;
1136         return 0;
1137
1138 out_err:
1139         dev_err(haptics->dev, "chip initialization error: %d\n", error);
1140         return error;
1141 }
1142
1143 static int da7280_probe(struct i2c_client *client,
1144                         const struct i2c_device_id *id)
1145 {
1146         struct device *dev = &client->dev;
1147         struct da7280_haptic *haptics;
1148         struct input_dev *input_dev;
1149         struct pwm_state state;
1150         struct ff_device *ff;
1151         int error;
1152
1153         if (!client->irq) {
1154                 dev_err(dev, "No IRQ configured\n");
1155                 return -EINVAL;
1156         }
1157
1158         haptics = devm_kzalloc(dev, sizeof(*haptics), GFP_KERNEL);
1159         if (!haptics)
1160                 return -ENOMEM;
1161
1162         haptics->dev = dev;
1163
1164         da7280_parse_properties(dev, haptics);
1165
1166         if (haptics->const_op_mode == DA7280_PWM_MODE) {
1167                 haptics->pwm_dev = devm_pwm_get(dev, NULL);
1168                 error = PTR_ERR_OR_ZERO(haptics->pwm_dev);
1169                 if (error) {
1170                         if (error != -EPROBE_DEFER)
1171                                 dev_err(dev, "Unable to request PWM: %d\n",
1172                                         error);
1173                         return error;
1174                 }
1175
1176                 /* Sync up PWM state and ensure it is off. */
1177                 pwm_init_state(haptics->pwm_dev, &state);
1178                 state.enabled = false;
1179                 error = pwm_apply_state(haptics->pwm_dev, &state);
1180                 if (error) {
1181                         dev_err(dev, "Failed to apply PWM state: %d\n", error);
1182                         return error;
1183                 }
1184
1185                 /*
1186                  * Check PWM period, PWM freq = 1000000 / state.period.
1187                  * The valid PWM freq range: 10k ~ 250kHz.
1188                  */
1189                 if (state.period > 100000 || state.period < 4000) {
1190                         dev_err(dev, "Unsupported PWM period: %lld\n",
1191                                 state.period);
1192                         return -EINVAL;
1193                 }
1194         }
1195
1196         INIT_WORK(&haptics->work, da7280_haptic_work);
1197
1198         haptics->client = client;
1199         i2c_set_clientdata(client, haptics);
1200
1201         haptics->regmap = devm_regmap_init_i2c(client,
1202                                                &da7280_haptic_regmap_config);
1203         error = PTR_ERR_OR_ZERO(haptics->regmap);
1204         if (error) {
1205                 dev_err(dev, "Failed to allocate register map: %d\n", error);
1206                 return error;
1207         }
1208
1209         error = da7280_init(haptics);
1210         if (error) {
1211                 dev_err(dev, "Failed to initialize device: %d\n", error);
1212                 return error;
1213         }
1214
1215         /* Initialize input device for haptic device */
1216         input_dev = devm_input_allocate_device(dev);
1217         if (!input_dev) {
1218                 dev_err(dev, "Failed to allocate input device\n");
1219                 return -ENOMEM;
1220         }
1221
1222         input_dev->name = "da7280-haptic";
1223         input_dev->dev.parent = client->dev.parent;
1224         input_dev->open = da7280_haptic_open;
1225         input_dev->close = da7280_haptic_close;
1226         input_set_drvdata(input_dev, haptics);
1227         haptics->input_dev = input_dev;
1228
1229         input_set_capability(haptics->input_dev, EV_FF, FF_PERIODIC);
1230         input_set_capability(haptics->input_dev, EV_FF, FF_CUSTOM);
1231         input_set_capability(haptics->input_dev, EV_FF, FF_CONSTANT);
1232         input_set_capability(haptics->input_dev, EV_FF, FF_GAIN);
1233
1234         error = input_ff_create(haptics->input_dev,
1235                                 DA7280_FF_EFFECT_COUNT_MAX);
1236         if (error) {
1237                 dev_err(dev, "Failed to create FF input device: %d\n", error);
1238                 return error;
1239         }
1240
1241         ff = input_dev->ff;
1242         ff->upload = da7280_haptics_upload_effect;
1243         ff->playback = da7280_haptics_playback;
1244
1245         error = input_register_device(input_dev);
1246         if (error) {
1247                 dev_err(dev, "Failed to register input device: %d\n", error);
1248                 return error;
1249         }
1250
1251         error = devm_request_threaded_irq(dev, client->irq,
1252                                           NULL, da7280_irq_handler,
1253                                           IRQF_ONESHOT,
1254                                           "da7280-haptics", haptics);
1255         if (error) {
1256                 dev_err(dev, "Failed to request IRQ %d: %d\n",
1257                         client->irq, error);
1258                 return error;
1259         }
1260
1261         return 0;
1262 }
1263
1264 static int __maybe_unused da7280_suspend(struct device *dev)
1265 {
1266         struct da7280_haptic *haptics = dev_get_drvdata(dev);
1267
1268         mutex_lock(&haptics->input_dev->mutex);
1269
1270         /*
1271          * Make sure no new requests will be submitted while device is
1272          * suspended.
1273          */
1274         spin_lock_irq(&haptics->input_dev->event_lock);
1275         haptics->suspended = true;
1276         spin_unlock_irq(&haptics->input_dev->event_lock);
1277
1278         da7280_haptic_stop(haptics);
1279
1280         mutex_unlock(&haptics->input_dev->mutex);
1281
1282         return 0;
1283 }
1284
1285 static int __maybe_unused da7280_resume(struct device *dev)
1286 {
1287         struct da7280_haptic *haptics = dev_get_drvdata(dev);
1288         int retval;
1289
1290         mutex_lock(&haptics->input_dev->mutex);
1291
1292         retval = da7280_haptic_start(haptics);
1293         if (!retval) {
1294                 spin_lock_irq(&haptics->input_dev->event_lock);
1295                 haptics->suspended = false;
1296                 spin_unlock_irq(&haptics->input_dev->event_lock);
1297         }
1298
1299         mutex_unlock(&haptics->input_dev->mutex);
1300         return retval;
1301 }
1302
1303 #ifdef CONFIG_OF
1304 static const struct of_device_id da7280_of_match[] = {
1305         { .compatible = "dlg,da7280", },
1306         { }
1307 };
1308 MODULE_DEVICE_TABLE(of, da7280_of_match);
1309 #endif
1310
1311 static const struct i2c_device_id da7280_i2c_id[] = {
1312         { "da7280", },
1313         { }
1314 };
1315 MODULE_DEVICE_TABLE(i2c, da7280_i2c_id);
1316
1317 static SIMPLE_DEV_PM_OPS(da7280_pm_ops, da7280_suspend, da7280_resume);
1318
1319 static struct i2c_driver da7280_driver = {
1320         .driver = {
1321                 .name = "da7280",
1322                 .of_match_table = of_match_ptr(da7280_of_match),
1323                 .pm = &da7280_pm_ops,
1324         },
1325         .probe = da7280_probe,
1326         .id_table = da7280_i2c_id,
1327 };
1328 module_i2c_driver(da7280_driver);
1329
1330 MODULE_DESCRIPTION("DA7280 haptics driver");
1331 MODULE_AUTHOR("Roy Im <[email protected]>");
1332 MODULE_LICENSE("GPL");