drivers/gpu/drm/sti/sti_awg_utils.c

   1 /*
   2  * Copyright (C) STMicroelectronics SA 2014
   3  * Author: Vincent Abriou <[email protected]> for STMicroelectronics.
   4  * License terms:  GNU General Public License (GPL), version 2
   5  */
   6
   7 #include "sti_awg_utils.h"
   8
   9 #define AWG_OPCODE_OFFSET 10
  10
  11 enum opcode {
  12         SET,
  13         RPTSET,
  14         RPLSET,
  15         SKIP,
  16         STOP,
  17         REPEAT,
  18         REPLAY,
  19         JUMP,
  20         HOLD,
  21 };
  22
  23 static int awg_generate_instr(enum opcode opcode,
  24                               long int arg,
  25                               long int mux_sel,
  26                               long int data_en,
  27                               struct awg_code_generation_params *fwparams)
  28 {
  29         u32 instruction = 0;
  30         u32 mux = (mux_sel << 8) & 0x1ff;
  31         u32 data_enable = (data_en << 9) & 0x2ff;
  32         long int arg_tmp = arg;
  33
  34         /* skip, repeat and replay arg should not exceed 1023.
  35          * If user wants to exceed this value, the instruction should be
  36          * duplicate and arg should be adjust for each duplicated instruction.
  37          */
  38
  39         while (arg_tmp > 0) {
  40                 arg = arg_tmp;
  41                 if (fwparams->instruction_offset >= AWG_MAX_INST) {
  42                         DRM_ERROR("too many number of instructions\n");
  43                         return -EINVAL;
  44                 }
  45
  46                 switch (opcode) {
  47                 case SKIP:
  48                         /* leave 'arg' + 1 pixel elapsing without changing
  49                          * output bus */
  50                         arg--; /* pixel adjustment */
  51                         arg_tmp--;
  52
  53                         if (arg < 0) {
  54                                 /* SKIP instruction not needed */
  55                                 return 0;
  56                         }
  57
  58                         if (arg == 0) {
  59                                 /* SKIP 0 not permitted but we want to skip 1
  60                                  * pixel. So we transform SKIP into SET
  61                                  * instruction */
  62                                 opcode = SET;
  63                                 break;
  64                         }
  65
  66                         mux = 0;
  67                         data_enable = 0;
  68                         arg = (arg << 22) >> 22;
  69                         arg &= (0x3ff);
  70                         break;
  71                 case REPEAT:
  72                 case REPLAY:
  73                         if (arg == 0) {
  74                                 /* REPEAT or REPLAY instruction not needed */
  75                                 return 0;
  76                         }
  77
  78                         mux = 0;
  79                         data_enable = 0;
  80                         arg = (arg << 22) >> 22;
  81                         arg &= (0x3ff);
  82                         break;
  83                 case JUMP:
  84                         mux = 0;
  85                         data_enable = 0;
  86                         arg |= 0x40; /* for jump instruction 7th bit is 1 */
  87                         arg = (arg << 22) >> 22;
  88                         arg &= 0x3ff;
  89                         break;
  90                 case STOP:
  91                         arg = 0;
  92                         break;
  93                 case SET:
  94                 case RPTSET:
  95                 case RPLSET:
  96                 case HOLD:
  97                         arg = (arg << 24) >> 24;
  98                         arg &= (0x0ff);
  99                         break;
 100                 default:
 101                         DRM_ERROR("instruction %d does not exist\n", opcode);
 102                         return -EINVAL;
 103                 }
 104
 105                 arg_tmp = arg_tmp - arg;
 106
 107                 arg = ((arg + mux) + data_enable);
 108
 109                 instruction = ((opcode) << AWG_OPCODE_OFFSET) | arg;
 110                 fwparams->ram_code[fwparams->instruction_offset] =
 111                         instruction & (0x3fff);
 112                 fwparams->instruction_offset++;
 113         }
 114         return 0;
 115 }
 116
 117 int sti_awg_generate_code_data_enable_mode(
 118                 struct awg_code_generation_params *fwparams,
 119                 struct awg_timing *timing)
 120 {
 121         long int val;
 122         long int data_en;
 123         int ret = 0;
 124
 125         if (timing->trailing_lines > 0) {
 126                 /* skip trailing lines */
 127                 val = timing->blanking_level;
 128                 data_en = 0;
 129                 ret |= awg_generate_instr(RPLSET, val, 0, data_en, fwparams);
 130
 131                 val = timing->trailing_lines - 1;
 132                 data_en = 0;
 133                 ret |= awg_generate_instr(REPLAY, val, 0, data_en, fwparams);
 134         }
 135
 136         if (timing->trailing_pixels > 0) {
 137                 /* skip trailing pixel */
 138                 val = timing->blanking_level;
 139                 data_en = 0;
 140                 ret |= awg_generate_instr(RPLSET, val, 0, data_en, fwparams);
 141
 142                 val = timing->trailing_pixels - 1;
 143                 data_en = 0;
 144                 ret |= awg_generate_instr(SKIP, val, 0, data_en, fwparams);
 145         }
 146
 147         /* set DE signal high */
 148         val = timing->blanking_level;
 149         data_en = 1;
 150         ret |= awg_generate_instr((timing->trailing_pixels > 0) ? SET : RPLSET,
 151                         val, 0, data_en, fwparams);
 152
 153         if (timing->blanking_pixels > 0) {
 154                 /* skip the number of active pixel */
 155                 val = timing->active_pixels - 1;
 156                 data_en = 1;
 157                 ret |= awg_generate_instr(SKIP, val, 0, data_en, fwparams);
 158
 159                 /* set DE signal low */
 160                 val = timing->blanking_level;
 161                 data_en = 0;
 162                 ret |= awg_generate_instr(SET, val, 0, data_en, fwparams);
 163         }
 164
 165         /* replay the sequence as many active lines defined */
 166         val = timing->active_lines - 1;
 167         data_en = 0;
 168         ret |= awg_generate_instr(REPLAY, val, 0, data_en, fwparams);
 169
 170         if (timing->blanking_lines > 0) {
 171                 /* skip blanking lines */
 172                 val = timing->blanking_level;
 173                 data_en = 0;
 174                 ret |= awg_generate_instr(RPLSET, val, 0, data_en, fwparams);
 175
 176                 val = timing->blanking_lines - 1;
 177                 data_en = 0;
 178                 ret |= awg_generate_instr(REPLAY, val, 0, data_en, fwparams);
 179         }
 180
 181         return ret;
 182 }