drivers/scsi/mpt2sas/mpt2sas_scsih.c

   1 /*
   2  * Scsi Host Layer for MPT (Message Passing Technology) based controllers
   3  *
   4  * This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c
   5  * Copyright (C) 2007-2014  LSI Corporation
   6  *  (mailto:[email protected])
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * as published by the Free Software Foundation; either version 2
  11  * of the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * NO WARRANTY
  19  * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  20  * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  21  * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  22  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  23  * solely responsible for determining the appropriateness of using and
  24  * distributing the Program and assumes all risks associated with its
  25  * exercise of rights under this Agreement, including but not limited to
  26  * the risks and costs of program errors, damage to or loss of data,
  27  * programs or equipment, and unavailability or interruption of operations.
  28
  29  * DISCLAIMER OF LIABILITY
  30  * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  31  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  32  * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  33  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  34  * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  35  * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  36  * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  37
  38  * You should have received a copy of the GNU General Public License
  39  * along with this program; if not, write to the Free Software
  40  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
  41  * USA.
  42  */
  43
  44 #include <linux/module.h>
  45 #include <linux/kernel.h>
  46 #include <linux/init.h>
  47 #include <linux/errno.h>
  48 #include <linux/blkdev.h>
  49 #include <linux/sched.h>
  50 #include <linux/workqueue.h>
  51 #include <linux/delay.h>
  52 #include <linux/pci.h>
  53 #include <linux/interrupt.h>
  54 #include <linux/aer.h>
  55 #include <linux/raid_class.h>
  56 #include <linux/slab.h>
  57
  58 #include <asm/unaligned.h>
  59
  60 #include "mpt2sas_base.h"
  61
  62 MODULE_AUTHOR(MPT2SAS_AUTHOR);
  63 MODULE_DESCRIPTION(MPT2SAS_DESCRIPTION);
  64 MODULE_LICENSE("GPL");
  65 MODULE_VERSION(MPT2SAS_DRIVER_VERSION);
  66
  67 #define RAID_CHANNEL 1
  68
  69 /* forward proto's */
  70 static void _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
  71     struct _sas_node *sas_expander);
  72 static void _firmware_event_work(struct work_struct *work);
  73
  74 static u8 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid);
  75
  76 static void _scsih_scan_start(struct Scsi_Host *shost);
  77 static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time);
  78
  79 /* global parameters */
  80 LIST_HEAD(mpt2sas_ioc_list);
  81
  82 /* local parameters */
  83 static u8 scsi_io_cb_idx = -1;
  84 static u8 tm_cb_idx = -1;
  85 static u8 ctl_cb_idx = -1;
  86 static u8 base_cb_idx = -1;
  87 static u8 port_enable_cb_idx = -1;
  88 static u8 transport_cb_idx = -1;
  89 static u8 scsih_cb_idx = -1;
  90 static u8 config_cb_idx = -1;
  91 static int mpt_ids;
  92
  93 static u8 tm_tr_cb_idx = -1 ;
  94 static u8 tm_tr_volume_cb_idx = -1 ;
  95 static u8 tm_sas_control_cb_idx = -1;
  96
  97 /* command line options */
  98 static u32 logging_level;
  99 MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info "
 100     "(default=0)");
 101
 102 static ushort max_sectors = 0xFFFF;
 103 module_param(max_sectors, ushort, 0);
 104 MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 32767  default=32767");
 105
 106 static int missing_delay[2] = {-1, -1};
 107 module_param_array(missing_delay, int, NULL, 0);
 108 MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
 109
 110 /* scsi-mid layer global parmeter is max_report_luns, which is 511 */
 111 #define MPT2SAS_MAX_LUN (16895)
 112 static int max_lun = MPT2SAS_MAX_LUN;
 113 module_param(max_lun, int, 0);
 114 MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
 115
 116 /* diag_buffer_enable is bitwise
 117  * bit 0 set = TRACE
 118  * bit 1 set = SNAPSHOT
 119  * bit 2 set = EXTENDED
 120  *
 121  * Either bit can be set, or both
 122  */
 123 static int diag_buffer_enable = -1;
 124 module_param(diag_buffer_enable, int, 0);
 125 MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
 126         "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
 127
 128 static int disable_discovery = -1;
 129 module_param(disable_discovery, int, 0);
 130 MODULE_PARM_DESC(disable_discovery, " disable discovery ");
 131
 132 /* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
 133 static int prot_mask = 0;
 134 module_param(prot_mask, int, 0);
 135 MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=7 ");
 136
 137 /**
 138  * struct sense_info - common structure for obtaining sense keys
 139  * @skey: sense key
 140  * @asc: additional sense code
 141  * @ascq: additional sense code qualifier
 142  */
 143 struct sense_info {
 144         u8 skey;
 145         u8 asc;
 146         u8 ascq;
 147 };
 148
 149
 150 #define MPT2SAS_TURN_ON_PFA_LED (0xFFFC)
 151 #define MPT2SAS_PORT_ENABLE_COMPLETE (0xFFFD)
 152 #define MPT2SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF)
 153 /**
 154  * struct fw_event_work - firmware event struct
 155  * @list: link list framework
 156  * @work: work object (ioc->fault_reset_work_q)
 157  * @cancel_pending_work: flag set during reset handling
 158  * @ioc: per adapter object
 159  * @device_handle: device handle
 160  * @VF_ID: virtual function id
 161  * @VP_ID: virtual port id
 162  * @ignore: flag meaning this event has been marked to ignore
 163  * @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h
 164  * @event_data: reply event data payload follows
 165  *
 166  * This object stored on ioc->fw_event_list.
 167  */
 168 struct fw_event_work {
 169         struct list_head        list;
 170         u8                      cancel_pending_work;
 171         struct delayed_work     delayed_work;
 172         struct MPT2SAS_ADAPTER *ioc;
 173         u16                     device_handle;
 174         u8                      VF_ID;
 175         u8                      VP_ID;
 176         u8                      ignore;
 177         u16                     event;
 178         char                    event_data[0] __aligned(4);
 179 };
 180
 181 /* raid transport support */
 182 static struct raid_template *mpt2sas_raid_template;
 183
 184 /**
 185  * struct _scsi_io_transfer - scsi io transfer
 186  * @handle: sas device handle (assigned by firmware)
 187  * @is_raid: flag set for hidden raid components
 188  * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE,
 189  * @data_length: data transfer length
 190  * @data_dma: dma pointer to data
 191  * @sense: sense data
 192  * @lun: lun number
 193  * @cdb_length: cdb length
 194  * @cdb: cdb contents
 195  * @timeout: timeout for this command
 196  * @VF_ID: virtual function id
 197  * @VP_ID: virtual port id
 198  * @valid_reply: flag set for reply message
 199  * @sense_length: sense length
 200  * @ioc_status: ioc status
 201  * @scsi_state: scsi state
 202  * @scsi_status: scsi staus
 203  * @log_info: log information
 204  * @transfer_length: data length transfer when there is a reply message
 205  *
 206  * Used for sending internal scsi commands to devices within this module.
 207  * Refer to _scsi_send_scsi_io().
 208  */
 209 struct _scsi_io_transfer {
 210         u16     handle;
 211         u8      is_raid;
 212         enum dma_data_direction dir;
 213         u32     data_length;
 214         dma_addr_t data_dma;
 215         u8      sense[SCSI_SENSE_BUFFERSIZE];
 216         u32     lun;
 217         u8      cdb_length;
 218         u8      cdb[32];
 219         u8      timeout;
 220         u8      VF_ID;
 221         u8      VP_ID;
 222         u8      valid_reply;
 223   /* the following bits are only valid when 'valid_reply = 1' */
 224         u32     sense_length;
 225         u16     ioc_status;
 226         u8      scsi_state;
 227         u8      scsi_status;
 228         u32     log_info;
 229         u32     transfer_length;
 230 };
 231
 232 /*
 233  * The pci device ids are defined in mpi/mpi2_cnfg.h.
 234  */
 235 static struct pci_device_id scsih_pci_table[] = {
 236         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
 237                 PCI_ANY_ID, PCI_ANY_ID },
 238         /* Falcon ~ 2008*/
 239         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008,
 240                 PCI_ANY_ID, PCI_ANY_ID },
 241         /* Liberator ~ 2108 */
 242         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1,
 243                 PCI_ANY_ID, PCI_ANY_ID },
 244         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2,
 245                 PCI_ANY_ID, PCI_ANY_ID },
 246         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
 247                 PCI_ANY_ID, PCI_ANY_ID },
 248         /* Meteor ~ 2116 */
 249         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
 250                 PCI_ANY_ID, PCI_ANY_ID },
 251         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
 252                 PCI_ANY_ID, PCI_ANY_ID },
 253         /* Thunderbolt ~ 2208 */
 254         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
 255                 PCI_ANY_ID, PCI_ANY_ID },
 256         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
 257                 PCI_ANY_ID, PCI_ANY_ID },
 258         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
 259                 PCI_ANY_ID, PCI_ANY_ID },
 260         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
 261                 PCI_ANY_ID, PCI_ANY_ID },
 262         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
 263                 PCI_ANY_ID, PCI_ANY_ID },
 264         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
 265                 PCI_ANY_ID, PCI_ANY_ID },
 266         /* Mustang ~ 2308 */
 267         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1,
 268                 PCI_ANY_ID, PCI_ANY_ID },
 269         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2,
 270                 PCI_ANY_ID, PCI_ANY_ID },
 271         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
 272                 PCI_ANY_ID, PCI_ANY_ID },
 273         /* SSS6200 */
 274         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
 275                 PCI_ANY_ID, PCI_ANY_ID },
 276         {0}     /* Terminating entry */
 277 };
 278 MODULE_DEVICE_TABLE(pci, scsih_pci_table);
 279
 280 /**
 281  * _scsih_set_debug_level - global setting of ioc->logging_level.
 282  *
 283  * Note: The logging levels are defined in mpt2sas_debug.h.
 284  */
 285 static int
 286 _scsih_set_debug_level(const char *val, struct kernel_param *kp)
 287 {
 288         int ret = param_set_int(val, kp);
 289         struct MPT2SAS_ADAPTER *ioc;
 290
 291         if (ret)
 292                 return ret;
 293
 294         printk(KERN_INFO "setting logging_level(0x%08x)\n", logging_level);
 295         list_for_each_entry(ioc, &mpt2sas_ioc_list, list)
 296                 ioc->logging_level = logging_level;
 297         return 0;
 298 }
 299 module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
 300     &logging_level, 0644);
 301
 302 /**
 303  * _scsih_srch_boot_sas_address - search based on sas_address
 304  * @sas_address: sas address
 305  * @boot_device: boot device object from bios page 2
 306  *
 307  * Returns 1 when there's a match, 0 means no match.
 308  */
 309 static inline int
 310 _scsih_srch_boot_sas_address(u64 sas_address,
 311     Mpi2BootDeviceSasWwid_t *boot_device)
 312 {
 313         return (sas_address == le64_to_cpu(boot_device->SASAddress)) ?  1 : 0;
 314 }
 315
 316 /**
 317  * _scsih_srch_boot_device_name - search based on device name
 318  * @device_name: device name specified in INDENTIFY fram
 319  * @boot_device: boot device object from bios page 2
 320  *
 321  * Returns 1 when there's a match, 0 means no match.
 322  */
 323 static inline int
 324 _scsih_srch_boot_device_name(u64 device_name,
 325     Mpi2BootDeviceDeviceName_t *boot_device)
 326 {
 327         return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0;
 328 }
 329
 330 /**
 331  * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot
 332  * @enclosure_logical_id: enclosure logical id
 333  * @slot_number: slot number
 334  * @boot_device: boot device object from bios page 2
 335  *
 336  * Returns 1 when there's a match, 0 means no match.
 337  */
 338 static inline int
 339 _scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number,
 340     Mpi2BootDeviceEnclosureSlot_t *boot_device)
 341 {
 342         return (enclosure_logical_id == le64_to_cpu(boot_device->
 343             EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device->
 344             SlotNumber)) ? 1 : 0;
 345 }
 346
 347 /**
 348  * _scsih_is_boot_device - search for matching boot device.
 349  * @sas_address: sas address
 350  * @device_name: device name specified in INDENTIFY fram
 351  * @enclosure_logical_id: enclosure logical id
 352  * @slot_number: slot number
 353  * @form: specifies boot device form
 354  * @boot_device: boot device object from bios page 2
 355  *
 356  * Returns 1 when there's a match, 0 means no match.
 357  */
 358 static int
 359 _scsih_is_boot_device(u64 sas_address, u64 device_name,
 360     u64 enclosure_logical_id, u16 slot, u8 form,
 361     Mpi2BiosPage2BootDevice_t *boot_device)
 362 {
 363         int rc = 0;
 364
 365         switch (form) {
 366         case MPI2_BIOSPAGE2_FORM_SAS_WWID:
 367                 if (!sas_address)
 368                         break;
 369                 rc = _scsih_srch_boot_sas_address(
 370                     sas_address, &boot_device->SasWwid);
 371                 break;
 372         case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT:
 373                 if (!enclosure_logical_id)
 374                         break;
 375                 rc = _scsih_srch_boot_encl_slot(
 376                     enclosure_logical_id,
 377                     slot, &boot_device->EnclosureSlot);
 378                 break;
 379         case MPI2_BIOSPAGE2_FORM_DEVICE_NAME:
 380                 if (!device_name)
 381                         break;
 382                 rc = _scsih_srch_boot_device_name(
 383                     device_name, &boot_device->DeviceName);
 384                 break;
 385         case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED:
 386                 break;
 387         }
 388
 389         return rc;
 390 }
 391
 392 /**
 393  * _scsih_get_sas_address - set the sas_address for given device handle
 394  * @handle: device handle
 395  * @sas_address: sas address
 396  *
 397  * Returns 0 success, non-zero when failure
 398  */
 399 static int
 400 _scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle,
 401     u64 *sas_address)
 402 {
 403         Mpi2SasDevicePage0_t sas_device_pg0;
 404         Mpi2ConfigReply_t mpi_reply;
 405         u32 ioc_status;
 406         *sas_address = 0;
 407
 408         if (handle <= ioc->sas_hba.num_phys) {
 409                 *sas_address = ioc->sas_hba.sas_address;
 410                 return 0;
 411         }
 412
 413         if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
 414             MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
 415                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
 416                 __FILE__, __LINE__, __func__);
 417                 return -ENXIO;
 418         }
 419
 420         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
 421         if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
 422                 *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
 423                 return 0;
 424         }
 425
 426         /* we hit this becuase the given parent handle doesn't exist */
 427         if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 428                 return -ENXIO;
 429         /* else error case */
 430         printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x), "
 431             "failure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
 432              __FILE__, __LINE__, __func__);
 433         return -EIO;
 434 }
 435
 436 /**
 437  * _scsih_determine_boot_device - determine boot device.
 438  * @ioc: per adapter object
 439  * @device: either sas_device or raid_device object
 440  * @is_raid: [flag] 1 = raid object, 0 = sas object
 441  *
 442  * Determines whether this device should be first reported device to
 443  * to scsi-ml or sas transport, this purpose is for persistent boot device.
 444  * There are primary, alternate, and current entries in bios page 2. The order
 445  * priority is primary, alternate, then current.  This routine saves
 446  * the corresponding device object and is_raid flag in the ioc object.
 447  * The saved data to be used later in _scsih_probe_boot_devices().
 448  */
 449 static void
 450 _scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc,
 451     void *device, u8 is_raid)
 452 {
 453         struct _sas_device *sas_device;
 454         struct _raid_device *raid_device;
 455         u64 sas_address;
 456         u64 device_name;
 457         u64 enclosure_logical_id;
 458         u16 slot;
 459
 460          /* only process this function when driver loads */
 461         if (!ioc->is_driver_loading)
 462                 return;
 463
 464          /* no Bios, return immediately */
 465         if (!ioc->bios_pg3.BiosVersion)
 466                 return;
 467
 468         if (!is_raid) {
 469                 sas_device = device;
 470                 sas_address = sas_device->sas_address;
 471                 device_name = sas_device->device_name;
 472                 enclosure_logical_id = sas_device->enclosure_logical_id;
 473                 slot = sas_device->slot;
 474         } else {
 475                 raid_device = device;
 476                 sas_address = raid_device->wwid;
 477                 device_name = 0;
 478                 enclosure_logical_id = 0;
 479                 slot = 0;
 480         }
 481
 482         if (!ioc->req_boot_device.device) {
 483                 if (_scsih_is_boot_device(sas_address, device_name,
 484                     enclosure_logical_id, slot,
 485                     (ioc->bios_pg2.ReqBootDeviceForm &
 486                     MPI2_BIOSPAGE2_FORM_MASK),
 487                     &ioc->bios_pg2.RequestedBootDevice)) {
 488                         dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
 489                            "%s: req_boot_device(0x%016llx)\n",
 490                             ioc->name, __func__,
 491                             (unsigned long long)sas_address));
 492                         ioc->req_boot_device.device = device;
 493                         ioc->req_boot_device.is_raid = is_raid;
 494                 }
 495         }
 496
 497         if (!ioc->req_alt_boot_device.device) {
 498                 if (_scsih_is_boot_device(sas_address, device_name,
 499                     enclosure_logical_id, slot,
 500                     (ioc->bios_pg2.ReqAltBootDeviceForm &
 501                     MPI2_BIOSPAGE2_FORM_MASK),
 502                     &ioc->bios_pg2.RequestedAltBootDevice)) {
 503                         dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
 504                            "%s: req_alt_boot_device(0x%016llx)\n",
 505                             ioc->name, __func__,
 506                             (unsigned long long)sas_address));
 507                         ioc->req_alt_boot_device.device = device;
 508                         ioc->req_alt_boot_device.is_raid = is_raid;
 509                 }
 510         }
 511
 512         if (!ioc->current_boot_device.device) {
 513                 if (_scsih_is_boot_device(sas_address, device_name,
 514                     enclosure_logical_id, slot,
 515                     (ioc->bios_pg2.CurrentBootDeviceForm &
 516                     MPI2_BIOSPAGE2_FORM_MASK),
 517                     &ioc->bios_pg2.CurrentBootDevice)) {
 518                         dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
 519                            "%s: current_boot_device(0x%016llx)\n",
 520                             ioc->name, __func__,
 521                             (unsigned long long)sas_address));
 522                         ioc->current_boot_device.device = device;
 523                         ioc->current_boot_device.is_raid = is_raid;
 524                 }
 525         }
 526 }
 527
 528 /**
 529  * mpt2sas_scsih_sas_device_find_by_sas_address - sas device search
 530  * @ioc: per adapter object
 531  * @sas_address: sas address
 532  * Context: Calling function should acquire ioc->sas_device_lock
 533  *
 534  * This searches for sas_device based on sas_address, then return sas_device
 535  * object.
 536  */
 537 struct _sas_device *
 538 mpt2sas_scsih_sas_device_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
 539     u64 sas_address)
 540 {
 541         struct _sas_device *sas_device;
 542
 543         list_for_each_entry(sas_device, &ioc->sas_device_list, list)
 544                 if (sas_device->sas_address == sas_address)
 545                         return sas_device;
 546
 547         list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
 548                 if (sas_device->sas_address == sas_address)
 549                         return sas_device;
 550
 551         return NULL;
 552 }
 553
 554 /**
 555  * _scsih_sas_device_find_by_handle - sas device search
 556  * @ioc: per adapter object
 557  * @handle: sas device handle (assigned by firmware)
 558  * Context: Calling function should acquire ioc->sas_device_lock
 559  *
 560  * This searches for sas_device based on sas_address, then return sas_device
 561  * object.
 562  */
 563 static struct _sas_device *
 564 _scsih_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 565 {
 566         struct _sas_device *sas_device;
 567
 568         list_for_each_entry(sas_device, &ioc->sas_device_list, list)
 569                 if (sas_device->handle == handle)
 570                         return sas_device;
 571
 572         list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
 573                 if (sas_device->handle == handle)
 574                         return sas_device;
 575
 576         return NULL;
 577 }
 578
 579 /**
 580  * _scsih_sas_device_remove - remove sas_device from list.
 581  * @ioc: per adapter object
 582  * @sas_device: the sas_device object
 583  * Context: This function will acquire ioc->sas_device_lock.
 584  *
 585  * Removing object and freeing associated memory from the ioc->sas_device_list.
 586  */
 587 static void
 588 _scsih_sas_device_remove(struct MPT2SAS_ADAPTER *ioc,
 589     struct _sas_device *sas_device)
 590 {
 591         unsigned long flags;
 592
 593         if (!sas_device)
 594                 return;
 595
 596         spin_lock_irqsave(&ioc->sas_device_lock, flags);
 597         list_del(&sas_device->list);
 598         kfree(sas_device);
 599         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 600 }
 601
 602
 603 /**
 604  * _scsih_sas_device_add - insert sas_device to the list.
 605  * @ioc: per adapter object
 606  * @sas_device: the sas_device object
 607  * Context: This function will acquire ioc->sas_device_lock.
 608  *
 609  * Adding new object to the ioc->sas_device_list.
 610  */
 611 static void
 612 _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc,
 613     struct _sas_device *sas_device)
 614 {
 615         unsigned long flags;
 616
 617         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
 618             "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
 619             sas_device->handle, (unsigned long long)sas_device->sas_address));
 620
 621         spin_lock_irqsave(&ioc->sas_device_lock, flags);
 622         list_add_tail(&sas_device->list, &ioc->sas_device_list);
 623         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 624
 625         if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
 626              sas_device->sas_address_parent)) {
 627                 _scsih_sas_device_remove(ioc, sas_device);
 628         } else if (!sas_device->starget) {
 629                 /* When asyn scanning is enabled, its not possible to remove
 630                  * devices while scanning is turned on due to an oops in
 631                  * scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start()
 632                  */
 633                 if (!ioc->is_driver_loading) {
 634                         mpt2sas_transport_port_remove(ioc,
 635                         sas_device->sas_address,
 636                         sas_device->sas_address_parent);
 637                         _scsih_sas_device_remove(ioc, sas_device);
 638                 }
 639         }
 640 }
 641
 642 /**
 643  * _scsih_sas_device_init_add - insert sas_device to the list.
 644  * @ioc: per adapter object
 645  * @sas_device: the sas_device object
 646  * Context: This function will acquire ioc->sas_device_lock.
 647  *
 648  * Adding new object at driver load time to the ioc->sas_device_init_list.
 649  */
 650 static void
 651 _scsih_sas_device_init_add(struct MPT2SAS_ADAPTER *ioc,
 652     struct _sas_device *sas_device)
 653 {
 654         unsigned long flags;
 655
 656         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
 657             "(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
 658             sas_device->handle, (unsigned long long)sas_device->sas_address));
 659
 660         spin_lock_irqsave(&ioc->sas_device_lock, flags);
 661         list_add_tail(&sas_device->list, &ioc->sas_device_init_list);
 662         _scsih_determine_boot_device(ioc, sas_device, 0);
 663         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 664 }
 665
 666 /**
 667  * _scsih_raid_device_find_by_id - raid device search
 668  * @ioc: per adapter object
 669  * @id: sas device target id
 670  * @channel: sas device channel
 671  * Context: Calling function should acquire ioc->raid_device_lock
 672  *
 673  * This searches for raid_device based on target id, then return raid_device
 674  * object.
 675  */
 676 static struct _raid_device *
 677 _scsih_raid_device_find_by_id(struct MPT2SAS_ADAPTER *ioc, int id, int channel)
 678 {
 679         struct _raid_device *raid_device, *r;
 680
 681         r = NULL;
 682         list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
 683                 if (raid_device->id == id && raid_device->channel == channel) {
 684                         r = raid_device;
 685                         goto out;
 686                 }
 687         }
 688
 689  out:
 690         return r;
 691 }
 692
 693 /**
 694  * _scsih_raid_device_find_by_handle - raid device search
 695  * @ioc: per adapter object
 696  * @handle: sas device handle (assigned by firmware)
 697  * Context: Calling function should acquire ioc->raid_device_lock
 698  *
 699  * This searches for raid_device based on handle, then return raid_device
 700  * object.
 701  */
 702 static struct _raid_device *
 703 _scsih_raid_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 704 {
 705         struct _raid_device *raid_device, *r;
 706
 707         r = NULL;
 708         list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
 709                 if (raid_device->handle != handle)
 710                         continue;
 711                 r = raid_device;
 712                 goto out;
 713         }
 714
 715  out:
 716         return r;
 717 }
 718
 719 /**
 720  * _scsih_raid_device_find_by_wwid - raid device search
 721  * @ioc: per adapter object
 722  * @handle: sas device handle (assigned by firmware)
 723  * Context: Calling function should acquire ioc->raid_device_lock
 724  *
 725  * This searches for raid_device based on wwid, then return raid_device
 726  * object.
 727  */
 728 static struct _raid_device *
 729 _scsih_raid_device_find_by_wwid(struct MPT2SAS_ADAPTER *ioc, u64 wwid)
 730 {
 731         struct _raid_device *raid_device, *r;
 732
 733         r = NULL;
 734         list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
 735                 if (raid_device->wwid != wwid)
 736                         continue;
 737                 r = raid_device;
 738                 goto out;
 739         }
 740
 741  out:
 742         return r;
 743 }
 744
 745 /**
 746  * _scsih_raid_device_add - add raid_device object
 747  * @ioc: per adapter object
 748  * @raid_device: raid_device object
 749  *
 750  * This is added to the raid_device_list link list.
 751  */
 752 static void
 753 _scsih_raid_device_add(struct MPT2SAS_ADAPTER *ioc,
 754     struct _raid_device *raid_device)
 755 {
 756         unsigned long flags;
 757
 758         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle"
 759             "(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
 760             raid_device->handle, (unsigned long long)raid_device->wwid));
 761
 762         spin_lock_irqsave(&ioc->raid_device_lock, flags);
 763         list_add_tail(&raid_device->list, &ioc->raid_device_list);
 764         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
 765 }
 766
 767 /**
 768  * _scsih_raid_device_remove - delete raid_device object
 769  * @ioc: per adapter object
 770  * @raid_device: raid_device object
 771  *
 772  */
 773 static void
 774 _scsih_raid_device_remove(struct MPT2SAS_ADAPTER *ioc,
 775     struct _raid_device *raid_device)
 776 {
 777         unsigned long flags;
 778
 779         spin_lock_irqsave(&ioc->raid_device_lock, flags);
 780         list_del(&raid_device->list);
 781         kfree(raid_device);
 782         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
 783 }
 784
 785 /**
 786  * mpt2sas_scsih_expander_find_by_handle - expander device search
 787  * @ioc: per adapter object
 788  * @handle: expander handle (assigned by firmware)
 789  * Context: Calling function should acquire ioc->sas_device_lock
 790  *
 791  * This searches for expander device based on handle, then returns the
 792  * sas_node object.
 793  */
 794 struct _sas_node *
 795 mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 796 {
 797         struct _sas_node *sas_expander, *r;
 798
 799         r = NULL;
 800         list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
 801                 if (sas_expander->handle != handle)
 802                         continue;
 803                 r = sas_expander;
 804                 goto out;
 805         }
 806  out:
 807         return r;
 808 }
 809
 810 /**
 811  * mpt2sas_scsih_expander_find_by_sas_address - expander device search
 812  * @ioc: per adapter object
 813  * @sas_address: sas address
 814  * Context: Calling function should acquire ioc->sas_node_lock.
 815  *
 816  * This searches for expander device based on sas_address, then returns the
 817  * sas_node object.
 818  */
 819 struct _sas_node *
 820 mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
 821     u64 sas_address)
 822 {
 823         struct _sas_node *sas_expander, *r;
 824
 825         r = NULL;
 826         list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
 827                 if (sas_expander->sas_address != sas_address)
 828                         continue;
 829                 r = sas_expander;
 830                 goto out;
 831         }
 832  out:
 833         return r;
 834 }
 835
 836 /**
 837  * _scsih_expander_node_add - insert expander device to the list.
 838  * @ioc: per adapter object
 839  * @sas_expander: the sas_device object
 840  * Context: This function will acquire ioc->sas_node_lock.
 841  *
 842  * Adding new object to the ioc->sas_expander_list.
 843  *
 844  * Return nothing.
 845  */
 846 static void
 847 _scsih_expander_node_add(struct MPT2SAS_ADAPTER *ioc,
 848     struct _sas_node *sas_expander)
 849 {
 850         unsigned long flags;
 851
 852         spin_lock_irqsave(&ioc->sas_node_lock, flags);
 853         list_add_tail(&sas_expander->list, &ioc->sas_expander_list);
 854         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
 855 }
 856
 857 /**
 858  * _scsih_is_end_device - determines if device is an end device
 859  * @device_info: bitfield providing information about the device.
 860  * Context: none
 861  *
 862  * Returns 1 if end device.
 863  */
 864 static int
 865 _scsih_is_end_device(u32 device_info)
 866 {
 867         if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE &&
 868                 ((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) |
 869                 (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) |
 870                 (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))
 871                 return 1;
 872         else
 873                 return 0;
 874 }
 875
 876 /**
 877  * _scsih_scsi_lookup_get - returns scmd entry
 878  * @ioc: per adapter object
 879  * @smid: system request message index
 880  *
 881  * Returns the smid stored scmd pointer.
 882  */
 883 static struct scsi_cmnd *
 884 _scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 885 {
 886         return ioc->scsi_lookup[smid - 1].scmd;
 887 }
 888
 889 /**
 890  * _scsih_scsi_lookup_get_clear - returns scmd entry
 891  * @ioc: per adapter object
 892  * @smid: system request message index
 893  *
 894  * Returns the smid stored scmd pointer.
 895  * Then will derefrence the stored scmd pointer.
 896  */
 897 static inline struct scsi_cmnd *
 898 _scsih_scsi_lookup_get_clear(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 899 {
 900         unsigned long flags;
 901         struct scsi_cmnd *scmd;
 902
 903         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 904         scmd = ioc->scsi_lookup[smid - 1].scmd;
 905         ioc->scsi_lookup[smid - 1].scmd = NULL;
 906         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 907
 908         return scmd;
 909 }
 910
 911 /**
 912  * _scsih_scsi_lookup_find_by_scmd - scmd lookup
 913  * @ioc: per adapter object
 914  * @smid: system request message index
 915  * @scmd: pointer to scsi command object
 916  * Context: This function will acquire ioc->scsi_lookup_lock.
 917  *
 918  * This will search for a scmd pointer in the scsi_lookup array,
 919  * returning the revelent smid.  A returned value of zero means invalid.
 920  */
 921 static u16
 922 _scsih_scsi_lookup_find_by_scmd(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd
 923     *scmd)
 924 {
 925         u16 smid;
 926         unsigned long   flags;
 927         int i;
 928
 929         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 930         smid = 0;
 931         for (i = 0; i < ioc->scsiio_depth; i++) {
 932                 if (ioc->scsi_lookup[i].scmd == scmd) {
 933                         smid = ioc->scsi_lookup[i].smid;
 934                         goto out;
 935                 }
 936         }
 937  out:
 938         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 939         return smid;
 940 }
 941
 942 /**
 943  * _scsih_scsi_lookup_find_by_target - search for matching channel:id
 944  * @ioc: per adapter object
 945  * @id: target id
 946  * @channel: channel
 947  * Context: This function will acquire ioc->scsi_lookup_lock.
 948  *
 949  * This will search for a matching channel:id in the scsi_lookup array,
 950  * returning 1 if found.
 951  */
 952 static u8
 953 _scsih_scsi_lookup_find_by_target(struct MPT2SAS_ADAPTER *ioc, int id,
 954     int channel)
 955 {
 956         u8 found;
 957         unsigned long   flags;
 958         int i;
 959
 960         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 961         found = 0;
 962         for (i = 0 ; i < ioc->scsiio_depth; i++) {
 963                 if (ioc->scsi_lookup[i].scmd &&
 964                     (ioc->scsi_lookup[i].scmd->device->id == id &&
 965                     ioc->scsi_lookup[i].scmd->device->channel == channel)) {
 966                         found = 1;
 967                         goto out;
 968                 }
 969         }
 970  out:
 971         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 972         return found;
 973 }
 974
 975 /**
 976  * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun
 977  * @ioc: per adapter object
 978  * @id: target id
 979  * @lun: lun number
 980  * @channel: channel
 981  * Context: This function will acquire ioc->scsi_lookup_lock.
 982  *
 983  * This will search for a matching channel:id:lun in the scsi_lookup array,
 984  * returning 1 if found.
 985  */
 986 static u8
 987 _scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id,
 988     unsigned int lun, int channel)
 989 {
 990         u8 found;
 991         unsigned long   flags;
 992         int i;
 993
 994         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 995         found = 0;
 996         for (i = 0 ; i < ioc->scsiio_depth; i++) {
 997                 if (ioc->scsi_lookup[i].scmd &&
 998                     (ioc->scsi_lookup[i].scmd->device->id == id &&
 999                     ioc->scsi_lookup[i].scmd->device->channel == channel &&
1000                     ioc->scsi_lookup[i].scmd->device->lun == lun)) {
1001                         found = 1;
1002                         goto out;
1003                 }
1004         }
1005  out:
1006         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1007         return found;
1008 }
1009
1010 /**
1011  * _scsih_get_chain_buffer_tracker - obtain chain tracker
1012  * @ioc: per adapter object
1013  * @smid: smid associated to an IO request
1014  *
1015  * Returns chain tracker(from ioc->free_chain_list)
1016  */
1017 static struct chain_tracker *
1018 _scsih_get_chain_buffer_tracker(struct MPT2SAS_ADAPTER *ioc, u16 smid)
1019 {
1020         struct chain_tracker *chain_req;
1021         unsigned long flags;
1022
1023         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1024         if (list_empty(&ioc->free_chain_list)) {
1025                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1026                 dfailprintk(ioc, printk(MPT2SAS_WARN_FMT "chain buffers not "
1027                         "available\n", ioc->name));
1028                 return NULL;
1029         }
1030         chain_req = list_entry(ioc->free_chain_list.next,
1031             struct chain_tracker, tracker_list);
1032         list_del_init(&chain_req->tracker_list);
1033         list_add_tail(&chain_req->tracker_list,
1034             &ioc->scsi_lookup[smid - 1].chain_list);
1035         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1036         return chain_req;
1037 }
1038
1039 /**
1040  * _scsih_build_scatter_gather - main sg creation routine
1041  * @ioc: per adapter object
1042  * @scmd: scsi command
1043  * @smid: system request message index
1044  * Context: none.
1045  *
1046  * The main routine that builds scatter gather table from a given
1047  * scsi request sent via the .queuecommand main handler.
1048  *
1049  * Returns 0 success, anything else error
1050  */
1051 static int
1052 _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc,
1053     struct scsi_cmnd *scmd, u16 smid)
1054 {
1055         Mpi2SCSIIORequest_t *mpi_request;
1056         dma_addr_t chain_dma;
1057         struct scatterlist *sg_scmd;
1058         void *sg_local, *chain;
1059         u32 chain_offset;
1060         u32 chain_length;
1061         u32 chain_flags;
1062         int sges_left;
1063         u32 sges_in_segment;
1064         u32 sgl_flags;
1065         u32 sgl_flags_last_element;
1066         u32 sgl_flags_end_buffer;
1067         struct chain_tracker *chain_req;
1068
1069         mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
1070
1071         /* init scatter gather flags */
1072         sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT;
1073         if (scmd->sc_data_direction == DMA_TO_DEVICE)
1074                 sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC;
1075         sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT)
1076             << MPI2_SGE_FLAGS_SHIFT;
1077         sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT |
1078             MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST)
1079             << MPI2_SGE_FLAGS_SHIFT;
1080         sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT;
1081
1082         sg_scmd = scsi_sglist(scmd);
1083         sges_left = scsi_dma_map(scmd);
1084         if (sges_left < 0) {
1085                 sdev_printk(KERN_ERR, scmd->device, "pci_map_sg"
1086                 " failed: request for %d bytes!\n", scsi_bufflen(scmd));
1087                 return -ENOMEM;
1088         }
1089
1090         sg_local = &mpi_request->SGL;
1091         sges_in_segment = ioc->max_sges_in_main_message;
1092         if (sges_left <= sges_in_segment)
1093                 goto fill_in_last_segment;
1094
1095         mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) +
1096             (sges_in_segment * ioc->sge_size))/4;
1097
1098         /* fill in main message segment when there is a chain following */
1099         while (sges_in_segment) {
1100                 if (sges_in_segment == 1)
1101                         ioc->base_add_sg_single(sg_local,
1102                             sgl_flags_last_element | sg_dma_len(sg_scmd),
1103                             sg_dma_address(sg_scmd));
1104                 else
1105                         ioc->base_add_sg_single(sg_local, sgl_flags |
1106                             sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
1107                 sg_scmd = sg_next(sg_scmd);
1108                 sg_local += ioc->sge_size;
1109                 sges_left--;
1110                 sges_in_segment--;
1111         }
1112
1113         /* initializing the chain flags and pointers */
1114         chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT;
1115         chain_req = _scsih_get_chain_buffer_tracker(ioc, smid);
1116         if (!chain_req)
1117                 return -1;
1118         chain = chain_req->chain_buffer;
1119         chain_dma = chain_req->chain_buffer_dma;
1120         do {
1121                 sges_in_segment = (sges_left <=
1122                     ioc->max_sges_in_chain_message) ? sges_left :
1123                     ioc->max_sges_in_chain_message;
1124                 chain_offset = (sges_left == sges_in_segment) ?
1125                     0 : (sges_in_segment * ioc->sge_size)/4;
1126                 chain_length = sges_in_segment * ioc->sge_size;
1127                 if (chain_offset) {
1128                         chain_offset = chain_offset <<
1129                             MPI2_SGE_CHAIN_OFFSET_SHIFT;
1130                         chain_length += ioc->sge_size;
1131                 }
1132                 ioc->base_add_sg_single(sg_local, chain_flags | chain_offset |
1133                     chain_length, chain_dma);
1134                 sg_local = chain;
1135                 if (!chain_offset)
1136                         goto fill_in_last_segment;
1137
1138                 /* fill in chain segments */
1139                 while (sges_in_segment) {
1140                         if (sges_in_segment == 1)
1141                                 ioc->base_add_sg_single(sg_local,
1142                                     sgl_flags_last_element |
1143                                     sg_dma_len(sg_scmd),
1144                                     sg_dma_address(sg_scmd));
1145                         else
1146                                 ioc->base_add_sg_single(sg_local, sgl_flags |
1147                                     sg_dma_len(sg_scmd),
1148                                     sg_dma_address(sg_scmd));
1149                         sg_scmd = sg_next(sg_scmd);
1150                         sg_local += ioc->sge_size;
1151                         sges_left--;
1152                         sges_in_segment--;
1153                 }
1154
1155                 chain_req = _scsih_get_chain_buffer_tracker(ioc, smid);
1156                 if (!chain_req)
1157                         return -1;
1158                 chain = chain_req->chain_buffer;
1159                 chain_dma = chain_req->chain_buffer_dma;
1160         } while (1);
1161
1162
1163  fill_in_last_segment:
1164
1165         /* fill the last segment */
1166         while (sges_left) {
1167                 if (sges_left == 1)
1168                         ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer |
1169                             sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
1170                 else
1171                         ioc->base_add_sg_single(sg_local, sgl_flags |
1172                             sg_dma_len(sg_scmd), sg_dma_address(sg_scmd));
1173                 sg_scmd = sg_next(sg_scmd);
1174                 sg_local += ioc->sge_size;
1175                 sges_left--;
1176         }
1177
1178         return 0;
1179 }
1180
1181 /**
1182  * _scsih_change_queue_depth - setting device queue depth
1183  * @sdev: scsi device struct
1184  * @qdepth: requested queue depth
1185  *
1186  * Returns queue depth.
1187  */
1188 static int
1189 _scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
1190 {
1191         struct Scsi_Host *shost = sdev->host;
1192         int max_depth;
1193         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
1194         struct MPT2SAS_DEVICE *sas_device_priv_data;
1195         struct MPT2SAS_TARGET *sas_target_priv_data;
1196         struct _sas_device *sas_device;
1197         unsigned long flags;
1198
1199         max_depth = shost->can_queue;
1200
1201         /* limit max device queue for SATA to 32 */
1202         sas_device_priv_data = sdev->hostdata;
1203         if (!sas_device_priv_data)
1204                 goto not_sata;
1205         sas_target_priv_data = sas_device_priv_data->sas_target;
1206         if (!sas_target_priv_data)
1207                 goto not_sata;
1208         if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))
1209                 goto not_sata;
1210         spin_lock_irqsave(&ioc->sas_device_lock, flags);
1211         sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
1212            sas_device_priv_data->sas_target->sas_address);
1213         if (sas_device && sas_device->device_info &
1214             MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
1215                 max_depth = MPT2SAS_SATA_QUEUE_DEPTH;
1216         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1217
1218  not_sata:
1219         if (!sdev->tagged_supported)
1220                 max_depth = 1;
1221         if (qdepth > max_depth)
1222                 qdepth = max_depth;
1223         return scsi_change_queue_depth(sdev, qdepth);
1224 }
1225
1226 /**
1227  * _scsih_target_alloc - target add routine
1228  * @starget: scsi target struct
1229  *
1230  * Returns 0 if ok. Any other return is assumed to be an error and
1231  * the device is ignored.
1232  */
1233 static int
1234 _scsih_target_alloc(struct scsi_target *starget)
1235 {
1236         struct Scsi_Host *shost = dev_to_shost(&starget->dev);
1237         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
1238         struct MPT2SAS_TARGET *sas_target_priv_data;
1239         struct _sas_device *sas_device;
1240         struct _raid_device *raid_device;
1241         unsigned long flags;
1242         struct sas_rphy *rphy;
1243
1244         sas_target_priv_data = kzalloc(sizeof(*sas_target_priv_data),
1245                                        GFP_KERNEL);
1246         if (!sas_target_priv_data)
1247                 return -ENOMEM;
1248
1249         starget->hostdata = sas_target_priv_data;
1250         sas_target_priv_data->starget = starget;
1251         sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
1252
1253         /* RAID volumes */
1254         if (starget->channel == RAID_CHANNEL) {
1255                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1256                 raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
1257                     starget->channel);
1258                 if (raid_device) {
1259                         sas_target_priv_data->handle = raid_device->handle;
1260                         sas_target_priv_data->sas_address = raid_device->wwid;
1261                         sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
1262                         if (ioc->is_warpdrive)
1263                                 sas_target_priv_data->raid_device = raid_device;
1264                         raid_device->starget = starget;
1265                 }
1266                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1267                 return 0;
1268         }
1269
1270         /* sas/sata devices */
1271         spin_lock_irqsave(&ioc->sas_device_lock, flags);
1272         rphy = dev_to_rphy(starget->dev.parent);
1273         sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
1274            rphy->identify.sas_address);
1275
1276         if (sas_device) {
1277                 sas_target_priv_data->handle = sas_device->handle;
1278                 sas_target_priv_data->sas_address = sas_device->sas_address;
1279                 sas_device->starget = starget;
1280                 sas_device->id = starget->id;
1281                 sas_device->channel = starget->channel;
1282                 if (test_bit(sas_device->handle, ioc->pd_handles))
1283                         sas_target_priv_data->flags |=
1284                             MPT_TARGET_FLAGS_RAID_COMPONENT;
1285         }
1286         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1287
1288         return 0;
1289 }
1290
1291 /**
1292  * _scsih_target_destroy - target destroy routine
1293  * @starget: scsi target struct
1294  *
1295  * Returns nothing.
1296  */
1297 static void
1298 _scsih_target_destroy(struct scsi_target *starget)
1299 {
1300         struct Scsi_Host *shost = dev_to_shost(&starget->dev);
1301         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
1302         struct MPT2SAS_TARGET *sas_target_priv_data;
1303         struct _sas_device *sas_device;
1304         struct _raid_device *raid_device;
1305         unsigned long flags;
1306         struct sas_rphy *rphy;
1307
1308         sas_target_priv_data = starget->hostdata;
1309         if (!sas_target_priv_data)
1310                 return;
1311
1312         if (starget->channel == RAID_CHANNEL) {
1313                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1314                 raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
1315                     starget->channel);
1316                 if (raid_device) {
1317                         raid_device->starget = NULL;
1318                         raid_device->sdev = NULL;
1319                 }
1320                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1321                 goto out;
1322         }
1323
1324         spin_lock_irqsave(&ioc->sas_device_lock, flags);
1325         rphy = dev_to_rphy(starget->dev.parent);
1326         sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
1327            rphy->identify.sas_address);
1328         if (sas_device && (sas_device->starget == starget) &&
1329             (sas_device->id == starget->id) &&
1330             (sas_device->channel == starget->channel))
1331                 sas_device->starget = NULL;
1332
1333         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1334
1335  out:
1336         kfree(sas_target_priv_data);
1337         starget->hostdata = NULL;
1338 }
1339
1340 /**
1341  * _scsih_slave_alloc - device add routine
1342  * @sdev: scsi device struct
1343  *
1344  * Returns 0 if ok. Any other return is assumed to be an error and
1345  * the device is ignored.
1346  */
1347 static int
1348 _scsih_slave_alloc(struct scsi_device *sdev)
1349 {
1350         struct Scsi_Host *shost;
1351         struct MPT2SAS_ADAPTER *ioc;
1352         struct MPT2SAS_TARGET *sas_target_priv_data;
1353         struct MPT2SAS_DEVICE *sas_device_priv_data;
1354         struct scsi_target *starget;
1355         struct _raid_device *raid_device;
1356         struct _sas_device *sas_device;
1357         unsigned long flags;
1358
1359         sas_device_priv_data = kzalloc(sizeof(*sas_device_priv_data),
1360                                        GFP_KERNEL);
1361         if (!sas_device_priv_data)
1362                 return -ENOMEM;
1363
1364         sas_device_priv_data->lun = sdev->lun;
1365         sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT;
1366
1367         starget = scsi_target(sdev);
1368         sas_target_priv_data = starget->hostdata;
1369         sas_target_priv_data->num_luns++;
1370         sas_device_priv_data->sas_target = sas_target_priv_data;
1371         sdev->hostdata = sas_device_priv_data;
1372         if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT))
1373                 sdev->no_uld_attach = 1;
1374
1375         shost = dev_to_shost(&starget->dev);
1376         ioc = shost_priv(shost);
1377         if (starget->channel == RAID_CHANNEL) {
1378                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1379                 raid_device = _scsih_raid_device_find_by_id(ioc,
1380                     starget->id, starget->channel);
1381                 if (raid_device)
1382                         raid_device->sdev = sdev; /* raid is single lun */
1383                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1384         }
1385
1386         if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
1387                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
1388                 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
1389                                 sas_target_priv_data->sas_address);
1390                 if (sas_device && (sas_device->starget == NULL)) {
1391                         sdev_printk(KERN_INFO, sdev,
1392                              "%s : sas_device->starget set to starget @ %d\n",
1393                              __func__, __LINE__);
1394                         sas_device->starget = starget;
1395                 }
1396                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1397         }
1398
1399         return 0;
1400 }
1401
1402 /**
1403  * _scsih_slave_destroy - device destroy routine
1404  * @sdev: scsi device struct
1405  *
1406  * Returns nothing.
1407  */
1408 static void
1409 _scsih_slave_destroy(struct scsi_device *sdev)
1410 {
1411         struct MPT2SAS_TARGET *sas_target_priv_data;
1412         struct scsi_target *starget;
1413         struct Scsi_Host *shost;
1414         struct MPT2SAS_ADAPTER *ioc;
1415         struct _sas_device *sas_device;
1416         unsigned long flags;
1417
1418         if (!sdev->hostdata)
1419                 return;
1420
1421         starget = scsi_target(sdev);
1422         sas_target_priv_data = starget->hostdata;
1423         sas_target_priv_data->num_luns--;
1424
1425         shost = dev_to_shost(&starget->dev);
1426         ioc = shost_priv(shost);
1427
1428         if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
1429                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
1430                 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
1431                    sas_target_priv_data->sas_address);
1432                 if (sas_device && !sas_target_priv_data->num_luns)
1433                         sas_device->starget = NULL;
1434                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1435         }
1436
1437         kfree(sdev->hostdata);
1438         sdev->hostdata = NULL;
1439 }
1440
1441 /**
1442  * _scsih_display_sata_capabilities - sata capabilities
1443  * @ioc: per adapter object
1444  * @handle: device handle
1445  * @sdev: scsi device struct
1446  */
1447 static void
1448 _scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
1449         u16 handle, struct scsi_device *sdev)
1450 {
1451         Mpi2ConfigReply_t mpi_reply;
1452         Mpi2SasDevicePage0_t sas_device_pg0;
1453         u32 ioc_status;
1454         u16 flags;
1455         u32 device_info;
1456
1457         if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
1458             MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
1459                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
1460                     ioc->name, __FILE__, __LINE__, __func__);
1461                 return;
1462         }
1463
1464         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
1465             MPI2_IOCSTATUS_MASK;
1466         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
1467                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
1468                     ioc->name, __FILE__, __LINE__, __func__);
1469                 return;
1470         }
1471
1472         flags = le16_to_cpu(sas_device_pg0.Flags);
1473         device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
1474
1475         sdev_printk(KERN_INFO, sdev,
1476             "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), "
1477             "sw_preserve(%s)\n",
1478             (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n",
1479             (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n",
1480             (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" :
1481             "n",
1482             (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n",
1483             (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n",
1484             (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n");
1485 }
1486
1487 /**
1488  * _scsih_is_raid - return boolean indicating device is raid volume
1489  * @dev the device struct object
1490  */
1491 static int
1492 _scsih_is_raid(struct device *dev)
1493 {
1494         struct scsi_device *sdev = to_scsi_device(dev);
1495         struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
1496
1497         if (ioc->is_warpdrive)
1498                 return 0;
1499         return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
1500 }
1501
1502 /**
1503  * _scsih_get_resync - get raid volume resync percent complete
1504  * @dev the device struct object
1505  */
1506 static void
1507 _scsih_get_resync(struct device *dev)
1508 {
1509         struct scsi_device *sdev = to_scsi_device(dev);
1510         struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
1511         static struct _raid_device *raid_device;
1512         unsigned long flags;
1513         Mpi2RaidVolPage0_t vol_pg0;
1514         Mpi2ConfigReply_t mpi_reply;
1515         u32 volume_status_flags;
1516         u8 percent_complete;
1517         u16 handle;
1518
1519         percent_complete = 0;
1520         handle = 0;
1521         if (ioc->is_warpdrive)
1522                 goto out;
1523
1524         spin_lock_irqsave(&ioc->raid_device_lock, flags);
1525         raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
1526             sdev->channel);
1527         if (raid_device) {
1528                 handle = raid_device->handle;
1529                 percent_complete = raid_device->percent_complete;
1530         }
1531         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1532
1533         if (!handle)
1534                 goto out;
1535
1536         if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
1537              MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
1538              sizeof(Mpi2RaidVolPage0_t))) {
1539                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
1540                     ioc->name, __FILE__, __LINE__, __func__);
1541                 percent_complete = 0;
1542                 goto out;
1543         }
1544
1545         volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags);
1546         if (!(volume_status_flags &
1547             MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS))
1548                 percent_complete = 0;
1549
1550  out:
1551         raid_set_resync(mpt2sas_raid_template, dev, percent_complete);
1552 }
1553
1554 /**
1555  * _scsih_get_state - get raid volume level
1556  * @dev the device struct object
1557  */
1558 static void
1559 _scsih_get_state(struct device *dev)
1560 {
1561         struct scsi_device *sdev = to_scsi_device(dev);
1562         struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host);
1563         static struct _raid_device *raid_device;
1564         unsigned long flags;
1565         Mpi2RaidVolPage0_t vol_pg0;
1566         Mpi2ConfigReply_t mpi_reply;
1567         u32 volstate;
1568         enum raid_state state = RAID_STATE_UNKNOWN;
1569         u16 handle = 0;
1570
1571         spin_lock_irqsave(&ioc->raid_device_lock, flags);
1572         raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
1573             sdev->channel);
1574         if (raid_device)
1575                 handle = raid_device->handle;
1576         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1577
1578         if (!raid_device)
1579                 goto out;
1580
1581         if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
1582              MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
1583              sizeof(Mpi2RaidVolPage0_t))) {
1584                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
1585                     ioc->name, __FILE__, __LINE__, __func__);
1586                 goto out;
1587         }
1588
1589         volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags);
1590         if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) {
1591                 state = RAID_STATE_RESYNCING;
1592                 goto out;
1593         }
1594
1595         switch (vol_pg0.VolumeState) {
1596         case MPI2_RAID_VOL_STATE_OPTIMAL:
1597         case MPI2_RAID_VOL_STATE_ONLINE:
1598                 state = RAID_STATE_ACTIVE;
1599                 break;
1600         case  MPI2_RAID_VOL_STATE_DEGRADED:
1601                 state = RAID_STATE_DEGRADED;
1602                 break;
1603         case MPI2_RAID_VOL_STATE_FAILED:
1604         case MPI2_RAID_VOL_STATE_MISSING:
1605                 state = RAID_STATE_OFFLINE;
1606                 break;
1607         }
1608  out:
1609         raid_set_state(mpt2sas_raid_template, dev, state);
1610 }
1611
1612 /**
1613  * _scsih_set_level - set raid level
1614  * @sdev: scsi device struct
1615  * @volume_type: volume type
1616  */
1617 static void
1618 _scsih_set_level(struct scsi_device *sdev, u8 volume_type)
1619 {
1620         enum raid_level level = RAID_LEVEL_UNKNOWN;
1621
1622         switch (volume_type) {
1623         case MPI2_RAID_VOL_TYPE_RAID0:
1624                 level = RAID_LEVEL_0;
1625                 break;
1626         case MPI2_RAID_VOL_TYPE_RAID10:
1627                 level = RAID_LEVEL_10;
1628                 break;
1629         case MPI2_RAID_VOL_TYPE_RAID1E:
1630                 level = RAID_LEVEL_1E;
1631                 break;
1632         case MPI2_RAID_VOL_TYPE_RAID1:
1633                 level = RAID_LEVEL_1;
1634                 break;
1635         }
1636
1637         raid_set_level(mpt2sas_raid_template, &sdev->sdev_gendev, level);
1638 }
1639
1640 /**
1641  * _scsih_get_volume_capabilities - volume capabilities
1642  * @ioc: per adapter object
1643  * @sas_device: the raid_device object
1644  *
1645  * Returns 0 for success, else 1
1646  */
1647 static int
1648 _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc,
1649     struct _raid_device *raid_device)
1650 {
1651         Mpi2RaidVolPage0_t *vol_pg0;
1652         Mpi2RaidPhysDiskPage0_t pd_pg0;
1653         Mpi2SasDevicePage0_t sas_device_pg0;
1654         Mpi2ConfigReply_t mpi_reply;
1655         u16 sz;
1656         u8 num_pds;
1657
1658         if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
1659             &num_pds)) || !num_pds) {
1660                 dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
1661                     "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
1662                     __func__));
1663                 return 1;
1664         }
1665
1666         raid_device->num_pds = num_pds;
1667         sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
1668             sizeof(Mpi2RaidVol0PhysDisk_t));
1669         vol_pg0 = kzalloc(sz, GFP_KERNEL);
1670         if (!vol_pg0) {
1671                 dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
1672                     "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
1673                     __func__));
1674                 return 1;
1675         }
1676
1677         if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
1678              MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
1679                 dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
1680                     "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
1681                     __func__));
1682                 kfree(vol_pg0);
1683                 return 1;
1684         }
1685
1686         raid_device->volume_type = vol_pg0->VolumeType;
1687
1688         /* figure out what the underlying devices are by
1689          * obtaining the device_info bits for the 1st device
1690          */
1691         if (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
1692             &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
1693             vol_pg0->PhysDisk[0].PhysDiskNum))) {
1694                 if (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
1695                     &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
1696                     le16_to_cpu(pd_pg0.DevHandle)))) {
1697                         raid_device->device_info =
1698                             le32_to_cpu(sas_device_pg0.DeviceInfo);
1699                 }
1700         }
1701
1702         kfree(vol_pg0);
1703         return 0;
1704 }
1705 /**
1706  * _scsih_disable_ddio - Disable direct I/O for all the volumes
1707  * @ioc: per adapter object
1708  */
1709 static void
1710 _scsih_disable_ddio(struct MPT2SAS_ADAPTER *ioc)
1711 {
1712         Mpi2RaidVolPage1_t vol_pg1;
1713         Mpi2ConfigReply_t mpi_reply;
1714         struct _raid_device *raid_device;
1715         u16 handle;
1716         u16 ioc_status;
1717         unsigned long flags;
1718
1719         handle = 0xFFFF;
1720         while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
1721             &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
1722                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
1723                     MPI2_IOCSTATUS_MASK;
1724                 if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
1725                         break;
1726                 handle = le16_to_cpu(vol_pg1.DevHandle);
1727                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1728                 raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
1729                 if (raid_device)
1730                         raid_device->direct_io_enabled = 0;
1731                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1732         }
1733         return;
1734 }
1735
1736
1737 /**
1738  * _scsih_get_num_volumes - Get number of volumes in the ioc
1739  * @ioc: per adapter object
1740  */
1741 static u8
1742 _scsih_get_num_volumes(struct MPT2SAS_ADAPTER *ioc)
1743 {
1744         Mpi2RaidVolPage1_t vol_pg1;
1745         Mpi2ConfigReply_t mpi_reply;
1746         u16 handle;
1747         u8 vol_cnt = 0;
1748         u16 ioc_status;
1749
1750         handle = 0xFFFF;
1751         while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
1752             &vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
1753                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
1754                     MPI2_IOCSTATUS_MASK;
1755                 if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
1756                         break;
1757                 vol_cnt++;
1758                 handle = le16_to_cpu(vol_pg1.DevHandle);
1759         }
1760         return vol_cnt;
1761 }
1762
1763
1764 /**
1765  * _scsih_init_warpdrive_properties - Set properties for warpdrive direct I/O.
1766  * @ioc: per adapter object
1767  * @raid_device: the raid_device object
1768  */
1769 static void
1770 _scsih_init_warpdrive_properties(struct MPT2SAS_ADAPTER *ioc,
1771         struct _raid_device *raid_device)
1772 {
1773         Mpi2RaidVolPage0_t *vol_pg0;
1774         Mpi2RaidPhysDiskPage0_t pd_pg0;
1775         Mpi2ConfigReply_t mpi_reply;
1776         u16 sz;
1777         u8 num_pds, count;
1778         unsigned long stripe_sz, block_sz;
1779         u8 stripe_exp, block_exp;
1780         u64 dev_max_lba;
1781
1782         if (!ioc->is_warpdrive)
1783                 return;
1784
1785         if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS) {
1786                 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
1787                     "globally as drives are exposed\n", ioc->name);
1788                 return;
1789         }
1790         if (_scsih_get_num_volumes(ioc) > 1) {
1791                 _scsih_disable_ddio(ioc);
1792                 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
1793                     "globally as number of drives > 1\n", ioc->name);
1794                 return;
1795         }
1796         if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle,
1797             &num_pds)) || !num_pds) {
1798                 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
1799                     "Failure in computing number of drives\n", ioc->name);
1800                 return;
1801         }
1802
1803         sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
1804             sizeof(Mpi2RaidVol0PhysDisk_t));
1805         vol_pg0 = kzalloc(sz, GFP_KERNEL);
1806         if (!vol_pg0) {
1807                 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
1808                     "Memory allocation failure for RVPG0\n", ioc->name);
1809                 return;
1810         }
1811
1812         if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
1813              MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
1814                 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
1815                     "Failure in retrieving RVPG0\n", ioc->name);
1816                 kfree(vol_pg0);
1817                 return;
1818         }
1819
1820         /*
1821          * WARPDRIVE:If number of physical disks in a volume exceeds the max pds
1822          * assumed for WARPDRIVE, disable direct I/O
1823          */
1824         if (num_pds > MPT_MAX_WARPDRIVE_PDS) {
1825                 printk(MPT2SAS_WARN_FMT "WarpDrive : Direct IO is disabled "
1826                     "for the drive with handle(0x%04x): num_mem=%d, "
1827                     "max_mem_allowed=%d\n", ioc->name, raid_device->handle,
1828                     num_pds, MPT_MAX_WARPDRIVE_PDS);
1829                 kfree(vol_pg0);
1830                 return;
1831         }
1832         for (count = 0; count < num_pds; count++) {
1833                 if (mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
1834                     &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
1835                     vol_pg0->PhysDisk[count].PhysDiskNum) ||
1836                      le16_to_cpu(pd_pg0.DevHandle) ==
1837                     MPT2SAS_INVALID_DEVICE_HANDLE) {
1838                         printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is "
1839                             "disabled for the drive with handle(0x%04x) member"
1840                             "handle retrieval failed for member number=%d\n",
1841                             ioc->name, raid_device->handle,
1842                             vol_pg0->PhysDisk[count].PhysDiskNum);
1843                         goto out_error;
1844                 }
1845                 /* Disable direct I/O if member drive lba exceeds 4 bytes */
1846                 dev_max_lba = le64_to_cpu(pd_pg0.DeviceMaxLBA);
1847                 if (dev_max_lba >> 32) {
1848                         printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is "
1849                             "disabled for the drive with handle(0x%04x) member"
1850                             "handle (0x%04x) unsupported max lba 0x%016llx\n",
1851                             ioc->name, raid_device->handle,
1852                             le16_to_cpu(pd_pg0.DevHandle),
1853                             (unsigned long long)dev_max_lba);
1854                         goto out_error;
1855                 }
1856
1857                 raid_device->pd_handle[count] = le16_to_cpu(pd_pg0.DevHandle);
1858         }
1859
1860         /*
1861          * Assumption for WD: Direct I/O is not supported if the volume is
1862          * not RAID0
1863          */
1864         if (raid_device->volume_type != MPI2_RAID_VOL_TYPE_RAID0) {
1865                 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
1866                     "for the drive with handle(0x%04x): type=%d, "
1867                     "s_sz=%uK, blk_size=%u\n", ioc->name,
1868                     raid_device->handle, raid_device->volume_type,
1869                     (le32_to_cpu(vol_pg0->StripeSize) *
1870                     le16_to_cpu(vol_pg0->BlockSize)) / 1024,
1871                     le16_to_cpu(vol_pg0->BlockSize));
1872                 goto out_error;
1873         }
1874
1875         stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
1876         stripe_exp = find_first_bit(&stripe_sz, 32);
1877         if (stripe_exp == 32) {
1878                 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
1879                 "for the drive with handle(0x%04x) invalid stripe sz %uK\n",
1880                     ioc->name, raid_device->handle,
1881                     (le32_to_cpu(vol_pg0->StripeSize) *
1882                     le16_to_cpu(vol_pg0->BlockSize)) / 1024);
1883                 goto out_error;
1884         }
1885         raid_device->stripe_exponent = stripe_exp;
1886         block_sz = le16_to_cpu(vol_pg0->BlockSize);
1887         block_exp = find_first_bit(&block_sz, 16);
1888         if (block_exp == 16) {
1889                 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled "
1890                     "for the drive with handle(0x%04x) invalid block sz %u\n",
1891                     ioc->name, raid_device->handle,
1892                     le16_to_cpu(vol_pg0->BlockSize));
1893                 goto out_error;
1894         }
1895         raid_device->block_exponent = block_exp;
1896         raid_device->direct_io_enabled = 1;
1897
1898         printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is Enabled for the drive"
1899             " with handle(0x%04x)\n", ioc->name, raid_device->handle);
1900         /*
1901          * WARPDRIVE: Though the following fields are not used for direct IO,
1902          * stored for future purpose:
1903          */
1904         raid_device->max_lba = le64_to_cpu(vol_pg0->MaxLBA);
1905         raid_device->stripe_sz = le32_to_cpu(vol_pg0->StripeSize);
1906         raid_device->block_sz = le16_to_cpu(vol_pg0->BlockSize);
1907
1908
1909         kfree(vol_pg0);
1910         return;
1911
1912 out_error:
1913         raid_device->direct_io_enabled = 0;
1914         for (count = 0; count < num_pds; count++)
1915                 raid_device->pd_handle[count] = 0;
1916         kfree(vol_pg0);
1917         return;
1918 }
1919
1920 /**
1921  * _scsih_enable_tlr - setting TLR flags
1922  * @ioc: per adapter object
1923  * @sdev: scsi device struct
1924  *
1925  * Enabling Transaction Layer Retries for tape devices when
1926  * vpd page 0x90 is present
1927  *
1928  */
1929 static void
1930 _scsih_enable_tlr(struct MPT2SAS_ADAPTER *ioc, struct scsi_device *sdev)
1931 {
1932         /* only for TAPE */
1933         if (sdev->type != TYPE_TAPE)
1934                 return;
1935
1936         if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR))
1937                 return;
1938
1939         sas_enable_tlr(sdev);
1940         sdev_printk(KERN_INFO, sdev, "TLR %s\n",
1941             sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled");
1942         return;
1943
1944 }
1945
1946 /**
1947  * _scsih_slave_configure - device configure routine.
1948  * @sdev: scsi device struct
1949  *
1950  * Returns 0 if ok. Any other return is assumed to be an error and
1951  * the device is ignored.
1952  */
1953 static int
1954 _scsih_slave_configure(struct scsi_device *sdev)
1955 {
1956         struct Scsi_Host *shost = sdev->host;
1957         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
1958         struct MPT2SAS_DEVICE *sas_device_priv_data;
1959         struct MPT2SAS_TARGET *sas_target_priv_data;
1960         struct _sas_device *sas_device;
1961         struct _raid_device *raid_device;
1962         unsigned long flags;
1963         int qdepth;
1964         u8 ssp_target = 0;
1965         char *ds = "";
1966         char *r_level = "";
1967         u16 handle, volume_handle = 0;
1968         u64 volume_wwid = 0;
1969
1970         qdepth = 1;
1971         sas_device_priv_data = sdev->hostdata;
1972         sas_device_priv_data->configured_lun = 1;
1973         sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT;
1974         sas_target_priv_data = sas_device_priv_data->sas_target;
1975         handle = sas_target_priv_data->handle;
1976
1977         /* raid volume handling */
1978         if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) {
1979
1980                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1981                 raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
1982                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1983                 if (!raid_device) {
1984                         dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
1985                             "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
1986                             __LINE__, __func__));
1987                         return 1;
1988                 }
1989
1990                 if (_scsih_get_volume_capabilities(ioc, raid_device)) {
1991                         dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
1992                             "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
1993                             __LINE__, __func__));
1994                         return 1;
1995                 }
1996                 /*
1997                  * WARPDRIVE: Initialize the required data for Direct IO
1998                  */
1999                 _scsih_init_warpdrive_properties(ioc, raid_device);
2000
2001                 /* RAID Queue Depth Support
2002                  * IS volume = underlying qdepth of drive type, either
2003                  *    MPT2SAS_SAS_QUEUE_DEPTH or MPT2SAS_SATA_QUEUE_DEPTH
2004                  * IM/IME/R10 = 128 (MPT2SAS_RAID_QUEUE_DEPTH)
2005                  */
2006                 if (raid_device->device_info &
2007                     MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
2008                         qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
2009                         ds = "SSP";
2010                 } else {
2011                         qdepth = MPT2SAS_SATA_QUEUE_DEPTH;
2012                          if (raid_device->device_info &
2013                             MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
2014                                 ds = "SATA";
2015                         else
2016                                 ds = "STP";
2017                 }
2018
2019                 switch (raid_device->volume_type) {
2020                 case MPI2_RAID_VOL_TYPE_RAID0:
2021                         r_level = "RAID0";
2022                         break;
2023                 case MPI2_RAID_VOL_TYPE_RAID1E:
2024                         qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
2025                         if (ioc->manu_pg10.OEMIdentifier &&
2026                             (le32_to_cpu(ioc->manu_pg10.GenericFlags0) &
2027                             MFG10_GF0_R10_DISPLAY) &&
2028                             !(raid_device->num_pds % 2))
2029                                 r_level = "RAID10";
2030                         else
2031                                 r_level = "RAID1E";
2032                         break;
2033                 case MPI2_RAID_VOL_TYPE_RAID1:
2034                         qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
2035                         r_level = "RAID1";
2036                         break;
2037                 case MPI2_RAID_VOL_TYPE_RAID10:
2038                         qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
2039                         r_level = "RAID10";
2040                         break;
2041                 case MPI2_RAID_VOL_TYPE_UNKNOWN:
2042                 default:
2043                         qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
2044                         r_level = "RAIDX";
2045                         break;
2046                 }
2047
2048                 if (!ioc->hide_ir_msg)
2049                         sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), "
2050                             "wwid(0x%016llx), pd_count(%d), type(%s)\n",
2051                             r_level, raid_device->handle,
2052                             (unsigned long long)raid_device->wwid,
2053                             raid_device->num_pds, ds);
2054                 _scsih_change_queue_depth(sdev, qdepth);
2055                 /* raid transport support */
2056                 if (!ioc->is_warpdrive)
2057                         _scsih_set_level(sdev, raid_device->volume_type);
2058                 return 0;
2059         }
2060
2061         /* non-raid handling */
2062         if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
2063                 if (mpt2sas_config_get_volume_handle(ioc, handle,
2064                     &volume_handle)) {
2065                         dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
2066                             "failure at %s:%d/%s()!\n", ioc->name,
2067                             __FILE__, __LINE__, __func__));
2068                         return 1;
2069                 }
2070                 if (volume_handle && mpt2sas_config_get_volume_wwid(ioc,
2071                     volume_handle, &volume_wwid)) {
2072                         dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
2073                             "failure at %s:%d/%s()!\n", ioc->name,
2074                             __FILE__, __LINE__, __func__));
2075                         return 1;
2076                 }
2077         }
2078
2079         spin_lock_irqsave(&ioc->sas_device_lock, flags);
2080         sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
2081            sas_device_priv_data->sas_target->sas_address);
2082         if (!sas_device) {
2083                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
2084                 dfailprintk(ioc, printk(MPT2SAS_WARN_FMT
2085                         "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
2086                         __LINE__, __func__));
2087                 return 1;
2088         }
2089         sas_device->volume_handle = volume_handle;
2090         sas_device->volume_wwid = volume_wwid;
2091         if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
2092                 qdepth = MPT2SAS_SAS_QUEUE_DEPTH;
2093                 ssp_target = 1;
2094                 ds = "SSP";
2095         } else {
2096                 qdepth = MPT2SAS_SATA_QUEUE_DEPTH;
2097                 if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET)
2098                         ds = "STP";
2099                 else if (sas_device->device_info &
2100                     MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
2101                         ds = "SATA";
2102         }
2103         sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), "
2104             "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n",
2105             ds, sas_device->handle,
2106             (unsigned long long)sas_device->sas_address,
2107             sas_device->phy,
2108             (unsigned long long)sas_device->device_name);
2109         sdev_printk(KERN_INFO, sdev, "%s: "
2110             "enclosure_logical_id(0x%016llx), slot(%d)\n", ds,
2111             (unsigned long long) sas_device->enclosure_logical_id,
2112             sas_device->slot);
2113
2114         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
2115         if (!ssp_target)
2116                 _scsih_display_sata_capabilities(ioc, handle, sdev);
2117
2118
2119         _scsih_change_queue_depth(sdev, qdepth);
2120
2121         if (ssp_target) {
2122                 sas_read_port_mode_page(sdev);
2123                 _scsih_enable_tlr(ioc, sdev);
2124         }
2125         return 0;
2126 }
2127
2128 /**
2129  * _scsih_bios_param - fetch head, sector, cylinder info for a disk
2130  * @sdev: scsi device struct
2131  * @bdev: pointer to block device context
2132  * @capacity: device size (in 512 byte sectors)
2133  * @params: three element array to place output:
2134  *              params[0] number of heads (max 255)
2135  *              params[1] number of sectors (max 63)
2136  *              params[2] number of cylinders
2137  *
2138  * Return nothing.
2139  */
2140 static int
2141 _scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
2142     sector_t capacity, int params[])
2143 {
2144         int             heads;
2145         int             sectors;
2146         sector_t        cylinders;
2147         ulong           dummy;
2148
2149         heads = 64;
2150         sectors = 32;
2151
2152         dummy = heads * sectors;
2153         cylinders = capacity;
2154         sector_div(cylinders, dummy);
2155
2156         /*
2157          * Handle extended translation size for logical drives
2158          * > 1Gb
2159          */
2160         if ((ulong)capacity >= 0x200000) {
2161                 heads = 255;
2162                 sectors = 63;
2163                 dummy = heads * sectors;
2164                 cylinders = capacity;
2165                 sector_div(cylinders, dummy);
2166         }
2167
2168         /* return result */
2169         params[0] = heads;
2170         params[1] = sectors;
2171         params[2] = cylinders;
2172
2173         return 0;
2174 }
2175
2176 /**
2177  * _scsih_response_code - translation of device response code
2178  * @ioc: per adapter object
2179  * @response_code: response code returned by the device
2180  *
2181  * Return nothing.
2182  */
2183 static void
2184 _scsih_response_code(struct MPT2SAS_ADAPTER *ioc, u8 response_code)
2185 {
2186         char *desc;
2187
2188         switch (response_code) {
2189         case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE:
2190                 desc = "task management request completed";
2191                 break;
2192         case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME:
2193                 desc = "invalid frame";
2194                 break;
2195         case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
2196                 desc = "task management request not supported";
2197                 break;
2198         case MPI2_SCSITASKMGMT_RSP_TM_FAILED:
2199                 desc = "task management request failed";
2200                 break;
2201         case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED:
2202                 desc = "task management request succeeded";
2203                 break;
2204         case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN:
2205                 desc = "invalid lun";
2206                 break;
2207         case 0xA:
2208                 desc = "overlapped tag attempted";
2209                 break;
2210         case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
2211                 desc = "task queued, however not sent to target";
2212                 break;
2213         default:
2214                 desc = "unknown";
2215                 break;
2216         }
2217         printk(MPT2SAS_WARN_FMT "response_code(0x%01x): %s\n",
2218                 ioc->name, response_code, desc);
2219 }
2220
2221 /**
2222  * _scsih_tm_done - tm completion routine
2223  * @ioc: per adapter object
2224  * @smid: system request message index
2225  * @msix_index: MSIX table index supplied by the OS
2226  * @reply: reply message frame(lower 32bit addr)
2227  * Context: none.
2228  *
2229  * The callback handler when using scsih_issue_tm.
2230  *
2231  * Return 1 meaning mf should be freed from _base_interrupt
2232  *        0 means the mf is freed from this function.
2233  */
2234 static u8
2235 _scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
2236 {
2237         MPI2DefaultReply_t *mpi_reply;
2238
2239         if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED)
2240                 return 1;
2241         if (ioc->tm_cmds.smid != smid)
2242                 return 1;
2243         mpt2sas_base_flush_reply_queues(ioc);
2244         ioc->tm_cmds.status |= MPT2_CMD_COMPLETE;
2245         mpi_reply =  mpt2sas_base_get_reply_virt_addr(ioc, reply);
2246         if (mpi_reply) {
2247                 memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
2248                 ioc->tm_cmds.status |= MPT2_CMD_REPLY_VALID;
2249         }
2250         ioc->tm_cmds.status &= ~MPT2_CMD_PENDING;
2251         complete(&ioc->tm_cmds.done);
2252         return 1;
2253 }
2254
2255 /**
2256  * mpt2sas_scsih_set_tm_flag - set per target tm_busy
2257  * @ioc: per adapter object
2258  * @handle: device handle
2259  *
2260  * During taskmangement request, we need to freeze the device queue.
2261  */
2262 void
2263 mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
2264 {
2265         struct MPT2SAS_DEVICE *sas_device_priv_data;
2266         struct scsi_device *sdev;
2267         u8 skip = 0;
2268
2269         shost_for_each_device(sdev, ioc->shost) {
2270                 if (skip)
2271                         continue;
2272                 sas_device_priv_data = sdev->hostdata;
2273                 if (!sas_device_priv_data)
2274                         continue;
2275                 if (sas_device_priv_data->sas_target->handle == handle) {
2276                         sas_device_priv_data->sas_target->tm_busy = 1;
2277                         skip = 1;
2278                         ioc->ignore_loginfos = 1;
2279                 }
2280         }
2281 }
2282
2283 /**
2284  * mpt2sas_scsih_clear_tm_flag - clear per target tm_busy
2285  * @ioc: per adapter object
2286  * @handle: device handle
2287  *
2288  * During taskmangement request, we need to freeze the device queue.
2289  */
2290 void
2291 mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
2292 {
2293         struct MPT2SAS_DEVICE *sas_device_priv_data;
2294         struct scsi_device *sdev;
2295         u8 skip = 0;
2296
2297         shost_for_each_device(sdev, ioc->shost) {
2298                 if (skip)
2299                         continue;
2300                 sas_device_priv_data = sdev->hostdata;
2301                 if (!sas_device_priv_data)
2302                         continue;
2303                 if (sas_device_priv_data->sas_target->handle == handle) {
2304                         sas_device_priv_data->sas_target->tm_busy = 0;
2305                         skip = 1;
2306                         ioc->ignore_loginfos = 0;
2307                 }
2308         }
2309 }
2310
2311
2312 /**
2313  * mpt2sas_scsih_issue_tm - main routine for sending tm requests
2314  * @ioc: per adapter struct
2315  * @device_handle: device handle
2316  * @channel: the channel assigned by the OS
2317  * @id: the id assigned by the OS
2318  * @lun: lun number
2319  * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
2320  * @smid_task: smid assigned to the task
2321  * @timeout: timeout in seconds
2322  * @m_type: TM_MUTEX_ON or TM_MUTEX_OFF
2323  * Context: user
2324  *
2325  * A generic API for sending task management requests to firmware.
2326  *
2327  * The callback index is set inside `ioc->tm_cb_idx`.
2328  *
2329  * Return SUCCESS or FAILED.
2330  */
2331 int
2332 mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint channel,
2333     uint id, uint lun, u8 type, u16 smid_task, ulong timeout,
2334         enum mutex_type m_type)
2335 {
2336         Mpi2SCSITaskManagementRequest_t *mpi_request;
2337         Mpi2SCSITaskManagementReply_t *mpi_reply;
2338         u16 smid = 0;
2339         u32 ioc_state;
2340         unsigned long timeleft;
2341         struct scsiio_tracker *scsi_lookup = NULL;
2342         int rc;
2343
2344         if (m_type == TM_MUTEX_ON)
2345                 mutex_lock(&ioc->tm_cmds.mutex);
2346         if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED) {
2347                 printk(MPT2SAS_INFO_FMT "%s: tm_cmd busy!!!\n",
2348                     __func__, ioc->name);
2349                 rc = FAILED;
2350                 goto err_out;
2351         }
2352
2353         if (ioc->shost_recovery || ioc->remove_host ||
2354             ioc->pci_error_recovery) {
2355                 printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
2356                     __func__, ioc->name);
2357                 rc = FAILED;
2358                 goto err_out;
2359         }
2360
2361         ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
2362         if (ioc_state & MPI2_DOORBELL_USED) {
2363                 dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell "
2364                     "active!\n", ioc->name));
2365                 rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
2366                     FORCE_BIG_HAMMER);
2367                 rc = (!rc) ? SUCCESS : FAILED;
2368                 goto err_out;
2369         }
2370
2371         if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
2372                 mpt2sas_base_fault_info(ioc, ioc_state &
2373                     MPI2_DOORBELL_DATA_MASK);
2374                 rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
2375                     FORCE_BIG_HAMMER);
2376                 rc = (!rc) ? SUCCESS : FAILED;
2377                 goto err_out;
2378         }
2379
2380         smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx);
2381         if (!smid) {
2382                 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
2383                     ioc->name, __func__);
2384                 rc = FAILED;
2385                 goto err_out;
2386         }
2387
2388         if (type == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
2389                 scsi_lookup = &ioc->scsi_lookup[smid_task - 1];
2390
2391         dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x),"
2392             " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type,
2393             smid_task));
2394         ioc->tm_cmds.status = MPT2_CMD_PENDING;
2395         mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
2396         ioc->tm_cmds.smid = smid;
2397         memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
2398         memset(ioc->tm_cmds.reply, 0, sizeof(Mpi2SCSITaskManagementReply_t));
2399         mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
2400         mpi_request->DevHandle = cpu_to_le16(handle);
2401         mpi_request->TaskType = type;
2402         mpi_request->TaskMID = cpu_to_le16(smid_task);
2403         int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
2404         mpt2sas_scsih_set_tm_flag(ioc, handle);
2405         init_completion(&ioc->tm_cmds.done);
2406         mpt2sas_base_put_smid_hi_priority(ioc, smid);
2407         timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
2408         if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) {
2409                 printk(MPT2SAS_ERR_FMT "%s: timeout\n",
2410                     ioc->name, __func__);
2411                 _debug_dump_mf(mpi_request,
2412                     sizeof(Mpi2SCSITaskManagementRequest_t)/4);
2413                 if (!(ioc->tm_cmds.status & MPT2_CMD_RESET)) {
2414                         rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
2415                             FORCE_BIG_HAMMER);
2416                         rc = (!rc) ? SUCCESS : FAILED;
2417                         ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
2418                         mpt2sas_scsih_clear_tm_flag(ioc, handle);
2419                         goto err_out;
2420                 }
2421         }
2422
2423         if (ioc->tm_cmds.status & MPT2_CMD_REPLY_VALID) {
2424                 mpi_reply = ioc->tm_cmds.reply;
2425                 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "complete tm: "
2426                     "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
2427                     ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
2428                     le32_to_cpu(mpi_reply->IOCLogInfo),
2429                     le32_to_cpu(mpi_reply->TerminationCount)));
2430                 if (ioc->logging_level & MPT_DEBUG_TM) {
2431                         _scsih_response_code(ioc, mpi_reply->ResponseCode);
2432                         if (mpi_reply->IOCStatus)
2433                                 _debug_dump_mf(mpi_request,
2434                                     sizeof(Mpi2SCSITaskManagementRequest_t)/4);
2435                 }
2436         }
2437
2438         switch (type) {
2439         case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
2440                 rc = SUCCESS;
2441                 if (scsi_lookup->scmd == NULL)
2442                         break;
2443                 rc = FAILED;
2444                 break;
2445
2446         case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
2447                 if (_scsih_scsi_lookup_find_by_target(ioc, id, channel))
2448                         rc = FAILED;
2449                 else
2450                         rc = SUCCESS;
2451                 break;
2452
2453         case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET:
2454         case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET:
2455                 if (_scsih_scsi_lookup_find_by_lun(ioc, id, lun, channel))
2456                         rc = FAILED;
2457                 else
2458                         rc = SUCCESS;
2459                 break;
2460         case MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK:
2461                 rc = SUCCESS;
2462                 break;
2463         default:
2464                 rc = FAILED;
2465                 break;
2466         }
2467
2468         mpt2sas_scsih_clear_tm_flag(ioc, handle);
2469         ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
2470         if (m_type == TM_MUTEX_ON)
2471                 mutex_unlock(&ioc->tm_cmds.mutex);
2472
2473         return rc;
2474
2475  err_out:
2476         if (m_type == TM_MUTEX_ON)
2477                 mutex_unlock(&ioc->tm_cmds.mutex);
2478         return rc;
2479 }
2480
2481 /**
2482  * _scsih_tm_display_info - displays info about the device
2483  * @ioc: per adapter struct
2484  * @scmd: pointer to scsi command object
2485  *
2486  * Called by task management callback handlers.
2487  */
2488 static void
2489 _scsih_tm_display_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
2490 {
2491         struct scsi_target *starget = scmd->device->sdev_target;
2492         struct MPT2SAS_TARGET *priv_target = starget->hostdata;
2493         struct _sas_device *sas_device = NULL;
2494         unsigned long flags;
2495         char *device_str = NULL;
2496
2497         if (!priv_target)
2498                 return;
2499         if (ioc->hide_ir_msg)
2500                 device_str = "WarpDrive";
2501         else
2502                 device_str = "volume";
2503
2504         scsi_print_command(scmd);
2505         if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
2506                 starget_printk(KERN_INFO, starget, "%s handle(0x%04x), "
2507                     "%s wwid(0x%016llx)\n", device_str, priv_target->handle,
2508                     device_str, (unsigned long long)priv_target->sas_address);
2509         } else {
2510                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
2511                 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
2512                     priv_target->sas_address);
2513                 if (sas_device) {
2514                         if (priv_target->flags &
2515                             MPT_TARGET_FLAGS_RAID_COMPONENT) {
2516                                 starget_printk(KERN_INFO, starget,
2517                                     "volume handle(0x%04x), "
2518                                     "volume wwid(0x%016llx)\n",
2519                                     sas_device->volume_handle,
2520                                    (unsigned long long)sas_device->volume_wwid);
2521                         }
2522                         starget_printk(KERN_INFO, starget,
2523                             "handle(0x%04x), sas_address(0x%016llx), phy(%d)\n",
2524                             sas_device->handle,
2525                             (unsigned long long)sas_device->sas_address,
2526                             sas_device->phy);
2527                         starget_printk(KERN_INFO, starget,
2528                             "enclosure_logical_id(0x%016llx), slot(%d)\n",
2529                            (unsigned long long)sas_device->enclosure_logical_id,
2530                             sas_device->slot);
2531                 }
2532                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
2533         }
2534 }
2535
2536 /**
2537  * _scsih_abort - eh threads main abort routine
2538  * @scmd: pointer to scsi command object
2539  *
2540  * Returns SUCCESS if command aborted else FAILED
2541  */
2542 static int
2543 _scsih_abort(struct scsi_cmnd *scmd)
2544 {
2545         struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
2546         struct MPT2SAS_DEVICE *sas_device_priv_data;
2547         u16 smid;
2548         u16 handle;
2549         int r;
2550
2551         sdev_printk(KERN_INFO, scmd->device, "attempting task abort! "
2552             "scmd(%p)\n", scmd);
2553         _scsih_tm_display_info(ioc, scmd);
2554
2555         sas_device_priv_data = scmd->device->hostdata;
2556         if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
2557                 sdev_printk(KERN_INFO, scmd->device, "device been deleted! "
2558                     "scmd(%p)\n", scmd);
2559                 scmd->result = DID_NO_CONNECT << 16;
2560                 scmd->scsi_done(scmd);
2561                 r = SUCCESS;
2562                 goto out;
2563         }
2564
2565         /* search for the command */
2566         smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd);
2567         if (!smid) {
2568                 scmd->result = DID_RESET << 16;
2569                 r = SUCCESS;
2570                 goto out;
2571         }
2572
2573         /* for hidden raid components and volumes this is not supported */
2574         if (sas_device_priv_data->sas_target->flags &
2575             MPT_TARGET_FLAGS_RAID_COMPONENT ||
2576             sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) {
2577                 scmd->result = DID_RESET << 16;
2578                 r = FAILED;
2579                 goto out;
2580         }
2581
2582         mpt2sas_halt_firmware(ioc);
2583
2584         handle = sas_device_priv_data->sas_target->handle;
2585         r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
2586             scmd->device->id, scmd->device->lun,
2587             MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30, TM_MUTEX_ON);
2588
2589  out:
2590         sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n",
2591             ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
2592         return r;
2593 }
2594
2595 /**
2596  * _scsih_dev_reset - eh threads main device reset routine
2597  * @scmd: pointer to scsi command object
2598  *
2599  * Returns SUCCESS if command aborted else FAILED
2600  */
2601 static int
2602 _scsih_dev_reset(struct scsi_cmnd *scmd)
2603 {
2604         struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
2605         struct MPT2SAS_DEVICE *sas_device_priv_data;
2606         struct _sas_device *sas_device;
2607         unsigned long flags;
2608         u16     handle;
2609         int r;
2610
2611         struct scsi_target *starget = scmd->device->sdev_target;
2612
2613         starget_printk(KERN_INFO, starget, "attempting device reset! "
2614             "scmd(%p)\n", scmd);
2615         _scsih_tm_display_info(ioc, scmd);
2616
2617         sas_device_priv_data = scmd->device->hostdata;
2618         if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
2619                 starget_printk(KERN_INFO, starget, "device been deleted! "
2620                     "scmd(%p)\n", scmd);
2621                 scmd->result = DID_NO_CONNECT << 16;
2622                 scmd->scsi_done(scmd);
2623                 r = SUCCESS;
2624                 goto out;
2625         }
2626
2627         /* for hidden raid components obtain the volume_handle */
2628         handle = 0;
2629         if (sas_device_priv_data->sas_target->flags &
2630             MPT_TARGET_FLAGS_RAID_COMPONENT) {
2631                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
2632                 sas_device = _scsih_sas_device_find_by_handle(ioc,
2633                    sas_device_priv_data->sas_target->handle);
2634                 if (sas_device)
2635                         handle = sas_device->volume_handle;
2636                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
2637         } else
2638                 handle = sas_device_priv_data->sas_target->handle;
2639
2640         if (!handle) {
2641                 scmd->result = DID_RESET << 16;
2642                 r = FAILED;
2643                 goto out;
2644         }
2645
2646         r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
2647             scmd->device->id, scmd->device->lun,
2648             MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 30, TM_MUTEX_ON);
2649
2650  out:
2651         sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n",
2652             ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
2653         return r;
2654 }
2655
2656 /**
2657  * _scsih_target_reset - eh threads main target reset routine
2658  * @scmd: pointer to scsi command object
2659  *
2660  * Returns SUCCESS if command aborted else FAILED
2661  */
2662 static int
2663 _scsih_target_reset(struct scsi_cmnd *scmd)
2664 {
2665         struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
2666         struct MPT2SAS_DEVICE *sas_device_priv_data;
2667         struct _sas_device *sas_device;
2668         unsigned long flags;
2669         u16     handle;
2670         int r;
2671         struct scsi_target *starget = scmd->device->sdev_target;
2672
2673         starget_printk(KERN_INFO, starget, "attempting target reset! "
2674             "scmd(%p)\n", scmd);
2675         _scsih_tm_display_info(ioc, scmd);
2676
2677         sas_device_priv_data = scmd->device->hostdata;
2678         if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
2679                 starget_printk(KERN_INFO, starget, "target been deleted! "
2680                     "scmd(%p)\n", scmd);
2681                 scmd->result = DID_NO_CONNECT << 16;
2682                 scmd->scsi_done(scmd);
2683                 r = SUCCESS;
2684                 goto out;
2685         }
2686
2687         /* for hidden raid components obtain the volume_handle */
2688         handle = 0;
2689         if (sas_device_priv_data->sas_target->flags &
2690             MPT_TARGET_FLAGS_RAID_COMPONENT) {
2691                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
2692                 sas_device = _scsih_sas_device_find_by_handle(ioc,
2693                    sas_device_priv_data->sas_target->handle);
2694                 if (sas_device)
2695                         handle = sas_device->volume_handle;
2696                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
2697         } else
2698                 handle = sas_device_priv_data->sas_target->handle;
2699
2700         if (!handle) {
2701                 scmd->result = DID_RESET << 16;
2702                 r = FAILED;
2703                 goto out;
2704         }
2705
2706         r = mpt2sas_scsih_issue_tm(ioc, handle, scmd->device->channel,
2707             scmd->device->id, 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
2708             30, TM_MUTEX_ON);
2709
2710  out:
2711         starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n",
2712             ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
2713         return r;
2714 }
2715
2716 /**
2717  * _scsih_host_reset - eh threads main host reset routine
2718  * @scmd: pointer to scsi command object
2719  *
2720  * Returns SUCCESS if command aborted else FAILED
2721  */
2722 static int
2723 _scsih_host_reset(struct scsi_cmnd *scmd)
2724 {
2725         struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
2726         int r, retval;
2727
2728         printk(MPT2SAS_INFO_FMT "attempting host reset! scmd(%p)\n",
2729             ioc->name, scmd);
2730         scsi_print_command(scmd);
2731
2732         retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
2733             FORCE_BIG_HAMMER);
2734         r = (retval < 0) ? FAILED : SUCCESS;
2735         printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n",
2736             ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
2737
2738         return r;
2739 }
2740
2741 /**
2742  * _scsih_fw_event_add - insert and queue up fw_event
2743  * @ioc: per adapter object
2744  * @fw_event: object describing the event
2745  * Context: This function will acquire ioc->fw_event_lock.
2746  *
2747  * This adds the firmware event object into link list, then queues it up to
2748  * be processed from user context.
2749  *
2750  * Return nothing.
2751  */
2752 static void
2753 _scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
2754 {
2755         unsigned long flags;
2756
2757         if (ioc->firmware_event_thread == NULL)
2758                 return;
2759
2760         spin_lock_irqsave(&ioc->fw_event_lock, flags);
2761         list_add_tail(&fw_event->list, &ioc->fw_event_list);
2762         INIT_DELAYED_WORK(&fw_event->delayed_work, _firmware_event_work);
2763         queue_delayed_work(ioc->firmware_event_thread,
2764             &fw_event->delayed_work, 0);
2765         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2766 }
2767
2768 /**
2769  * _scsih_fw_event_free - delete fw_event
2770  * @ioc: per adapter object
2771  * @fw_event: object describing the event
2772  * Context: This function will acquire ioc->fw_event_lock.
2773  *
2774  * This removes firmware event object from link list, frees associated memory.
2775  *
2776  * Return nothing.
2777  */
2778 static void
2779 _scsih_fw_event_free(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
2780     *fw_event)
2781 {
2782         unsigned long flags;
2783
2784         spin_lock_irqsave(&ioc->fw_event_lock, flags);
2785         list_del(&fw_event->list);
2786         kfree(fw_event);
2787         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2788 }
2789
2790
2791 /**
2792  * _scsih_error_recovery_delete_devices - remove devices not responding
2793  * @ioc: per adapter object
2794  *
2795  * Return nothing.
2796  */
2797 static void
2798 _scsih_error_recovery_delete_devices(struct MPT2SAS_ADAPTER *ioc)
2799 {
2800         struct fw_event_work *fw_event;
2801
2802         if (ioc->is_driver_loading)
2803                 return;
2804
2805         fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
2806         if (!fw_event)
2807                 return;
2808
2809         fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES;
2810         fw_event->ioc = ioc;
2811         _scsih_fw_event_add(ioc, fw_event);
2812 }
2813
2814 /**
2815  * mpt2sas_port_enable_complete - port enable completed (fake event)
2816  * @ioc: per adapter object
2817  *
2818  * Return nothing.
2819  */
2820 void
2821 mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc)
2822 {
2823         struct fw_event_work *fw_event;
2824
2825         fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
2826         if (!fw_event)
2827                 return;
2828         fw_event->event = MPT2SAS_PORT_ENABLE_COMPLETE;
2829         fw_event->ioc = ioc;
2830         _scsih_fw_event_add(ioc, fw_event);
2831 }
2832
2833 /**
2834  * _scsih_fw_event_cleanup_queue - cleanup event queue
2835  * @ioc: per adapter object
2836  *
2837  * Walk the firmware event queue, either killing timers, or waiting
2838  * for outstanding events to complete
2839  *
2840  * Return nothing.
2841  */
2842 static void
2843 _scsih_fw_event_cleanup_queue(struct MPT2SAS_ADAPTER *ioc)
2844 {
2845         struct fw_event_work *fw_event, *next;
2846
2847         if (list_empty(&ioc->fw_event_list) ||
2848              !ioc->firmware_event_thread || in_interrupt())
2849                 return;
2850
2851         list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) {
2852                 if (cancel_delayed_work_sync(&fw_event->delayed_work)) {
2853                         _scsih_fw_event_free(ioc, fw_event);
2854                         continue;
2855                 }
2856         }
2857 }
2858
2859 /**
2860  * _scsih_ublock_io_all_device - unblock every device
2861  * @ioc: per adapter object
2862  *
2863  * change the device state from block to running
2864  */
2865 static void
2866 _scsih_ublock_io_all_device(struct MPT2SAS_ADAPTER *ioc)
2867 {
2868         struct MPT2SAS_DEVICE *sas_device_priv_data;
2869         struct scsi_device *sdev;
2870
2871         shost_for_each_device(sdev, ioc->shost) {
2872                 sas_device_priv_data = sdev->hostdata;
2873                 if (!sas_device_priv_data)
2874                         continue;
2875                 if (!sas_device_priv_data->block)
2876                         continue;
2877                 sas_device_priv_data->block = 0;
2878                 dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, "device_running, "
2879                     "handle(0x%04x)\n",
2880                     sas_device_priv_data->sas_target->handle));
2881                 scsi_internal_device_unblock(sdev, SDEV_RUNNING);
2882         }
2883 }
2884 /**
2885  * _scsih_ublock_io_device - set the device state to SDEV_RUNNING
2886  * @ioc: per adapter object
2887  * @handle: device handle
2888  *
2889  * During device pull we need to appropiately set the sdev state.
2890  */
2891 static void
2892 _scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
2893 {
2894         struct MPT2SAS_DEVICE *sas_device_priv_data;
2895         struct scsi_device *sdev;
2896
2897         shost_for_each_device(sdev, ioc->shost) {
2898                 sas_device_priv_data = sdev->hostdata;
2899                 if (!sas_device_priv_data)
2900                         continue;
2901                 if (!sas_device_priv_data->block)
2902                         continue;
2903                 if (sas_device_priv_data->sas_target->sas_address ==
2904                                                                 sas_address) {
2905                         dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
2906                             MPT2SAS_INFO_FMT "SDEV_RUNNING: "
2907                             "sas address(0x%016llx)\n", ioc->name,
2908                                 (unsigned long long)sas_address));
2909                         sas_device_priv_data->block = 0;
2910                         scsi_internal_device_unblock(sdev, SDEV_RUNNING);
2911                 }
2912         }
2913 }
2914
2915 /**
2916  * _scsih_block_io_all_device - set the device state to SDEV_BLOCK
2917  * @ioc: per adapter object
2918  * @handle: device handle
2919  *
2920  * During device pull we need to appropiately set the sdev state.
2921  */
2922 static void
2923 _scsih_block_io_all_device(struct MPT2SAS_ADAPTER *ioc)
2924 {
2925         struct MPT2SAS_DEVICE *sas_device_priv_data;
2926         struct scsi_device *sdev;
2927
2928         shost_for_each_device(sdev, ioc->shost) {
2929                 sas_device_priv_data = sdev->hostdata;
2930                 if (!sas_device_priv_data)
2931                         continue;
2932                 if (sas_device_priv_data->block)
2933                         continue;
2934                 sas_device_priv_data->block = 1;
2935                 dewtprintk(ioc, sdev_printk(KERN_INFO, sdev, "device_blocked, "
2936                     "handle(0x%04x)\n",
2937                     sas_device_priv_data->sas_target->handle));
2938                 scsi_internal_device_block(sdev);
2939         }
2940 }
2941
2942
2943 /**
2944  * _scsih_block_io_device - set the device state to SDEV_BLOCK
2945  * @ioc: per adapter object
2946  * @handle: device handle
2947  *
2948  * During device pull we need to appropiately set the sdev state.
2949  */
2950 static void
2951 _scsih_block_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
2952 {
2953         struct MPT2SAS_DEVICE *sas_device_priv_data;
2954         struct scsi_device *sdev;
2955
2956         shost_for_each_device(sdev, ioc->shost) {
2957                 sas_device_priv_data = sdev->hostdata;
2958                 if (!sas_device_priv_data)
2959                         continue;
2960                 if (sas_device_priv_data->block)
2961                         continue;
2962                 if (sas_device_priv_data->sas_target->handle == handle) {
2963                         dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
2964                             MPT2SAS_INFO_FMT "SDEV_BLOCK: "
2965                             "handle(0x%04x)\n", ioc->name, handle));
2966                         sas_device_priv_data->block = 1;
2967                         scsi_internal_device_block(sdev);
2968                 }
2969         }
2970 }
2971
2972 /**
2973  * _scsih_block_io_to_children_attached_to_ex
2974  * @ioc: per adapter object
2975  * @sas_expander: the sas_device object
2976  *
2977  * This routine set sdev state to SDEV_BLOCK for all devices
2978  * attached to this expander. This function called when expander is
2979  * pulled.
2980  */
2981 static void
2982 _scsih_block_io_to_children_attached_to_ex(struct MPT2SAS_ADAPTER *ioc,
2983     struct _sas_node *sas_expander)
2984 {
2985         struct _sas_port *mpt2sas_port;
2986         struct _sas_device *sas_device;
2987         struct _sas_node *expander_sibling;
2988         unsigned long flags;
2989
2990         if (!sas_expander)
2991                 return;
2992
2993         list_for_each_entry(mpt2sas_port,
2994            &sas_expander->sas_port_list, port_list) {
2995                 if (mpt2sas_port->remote_identify.device_type ==
2996                     SAS_END_DEVICE) {
2997                         spin_lock_irqsave(&ioc->sas_device_lock, flags);
2998                         sas_device =
2999                             mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
3000                            mpt2sas_port->remote_identify.sas_address);
3001                         if (sas_device)
3002                                 set_bit(sas_device->handle,
3003                                     ioc->blocking_handles);
3004                         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
3005                 }
3006         }
3007
3008         list_for_each_entry(mpt2sas_port,
3009            &sas_expander->sas_port_list, port_list) {
3010
3011                 if (mpt2sas_port->remote_identify.device_type ==
3012                     SAS_EDGE_EXPANDER_DEVICE ||
3013                     mpt2sas_port->remote_identify.device_type ==
3014                     SAS_FANOUT_EXPANDER_DEVICE) {
3015                         expander_sibling =
3016                             mpt2sas_scsih_expander_find_by_sas_address(
3017                             ioc, mpt2sas_port->remote_identify.sas_address);
3018                         _scsih_block_io_to_children_attached_to_ex(ioc,
3019                             expander_sibling);
3020                 }
3021         }
3022 }
3023
3024 /**
3025  * _scsih_block_io_to_children_attached_directly
3026  * @ioc: per adapter object
3027  * @event_data: topology change event data
3028  *
3029  * This routine set sdev state to SDEV_BLOCK for all devices
3030  * direct attached during device pull.
3031  */
3032 static void
3033 _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
3034     Mpi2EventDataSasTopologyChangeList_t *event_data)
3035 {
3036         int i;
3037         u16 handle;
3038         u16 reason_code;
3039         u8 phy_number;
3040
3041         for (i = 0; i < event_data->NumEntries; i++) {
3042                 handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
3043                 if (!handle)
3044                         continue;
3045                 phy_number = event_data->StartPhyNum + i;
3046                 reason_code = event_data->PHY[i].PhyStatus &
3047                     MPI2_EVENT_SAS_TOPO_RC_MASK;
3048                 if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING)
3049                         _scsih_block_io_device(ioc, handle);
3050         }
3051 }
3052
3053 /**
3054  * _scsih_tm_tr_send - send task management request
3055  * @ioc: per adapter object
3056  * @handle: device handle
3057  * Context: interrupt time.
3058  *
3059  * This code is to initiate the device removal handshake protocol
3060  * with controller firmware.  This function will issue target reset
3061  * using high priority request queue.  It will send a sas iounit
3062  * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
3063  *
3064  * This is designed to send muliple task management request at the same
3065  * time to the fifo. If the fifo is full, we will append the request,
3066  * and process it in a future completion.
3067  */
3068 static void
3069 _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
3070 {
3071         Mpi2SCSITaskManagementRequest_t *mpi_request;
3072         u16 smid;
3073         struct _sas_device *sas_device;
3074         struct MPT2SAS_TARGET *sas_target_priv_data = NULL;
3075         u64 sas_address = 0;
3076         unsigned long flags;
3077         struct _tr_list *delayed_tr;
3078         u32 ioc_state;
3079
3080         if (ioc->remove_host) {
3081                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
3082                     "removed: handle(0x%04x)\n", __func__, ioc->name, handle));
3083                 return;
3084         } else if (ioc->pci_error_recovery) {
3085                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
3086                     "error recovery: handle(0x%04x)\n", __func__, ioc->name,
3087                     handle));
3088                 return;
3089         }
3090         ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
3091         if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
3092                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
3093                    "operational: handle(0x%04x)\n", __func__, ioc->name,
3094                    handle));
3095                 return;
3096         }
3097
3098         /* if PD, then return */
3099         if (test_bit(handle, ioc->pd_handles))
3100                 return;
3101
3102         spin_lock_irqsave(&ioc->sas_device_lock, flags);
3103         sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
3104         if (sas_device && sas_device->starget &&
3105              sas_device->starget->hostdata) {
3106                 sas_target_priv_data = sas_device->starget->hostdata;
3107                 sas_target_priv_data->deleted = 1;
3108                 sas_address = sas_device->sas_address;
3109         }
3110         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
3111
3112         if (sas_target_priv_data) {
3113                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: "
3114                 "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, handle,
3115                         (unsigned long long)sas_address));
3116                 _scsih_ublock_io_device(ioc, sas_address);
3117                 sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE;
3118         }
3119
3120         smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
3121         if (!smid) {
3122                 delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
3123                 if (!delayed_tr)
3124                         return;
3125                 INIT_LIST_HEAD(&delayed_tr->list);
3126                 delayed_tr->handle = handle;
3127                 list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
3128                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
3129                     "DELAYED:tr:handle(0x%04x), (open)\n",
3130                     ioc->name, handle));
3131                 return;
3132         }
3133
3134         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), "
3135             "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid,
3136             ioc->tm_tr_cb_idx));
3137         mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
3138         memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
3139         mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
3140         mpi_request->DevHandle = cpu_to_le16(handle);
3141         mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
3142         mpt2sas_base_put_smid_hi_priority(ioc, smid);
3143 }
3144
3145
3146
3147 /**
3148  * _scsih_sas_control_complete - completion routine
3149  * @ioc: per adapter object
3150  * @smid: system request message index
3151  * @msix_index: MSIX table index supplied by the OS
3152  * @reply: reply message frame(lower 32bit addr)
3153  * Context: interrupt time.
3154  *
3155  * This is the sas iounit control completion routine.
3156  * This code is part of the code to initiate the device removal
3157  * handshake protocol with controller firmware.
3158  *
3159  * Return 1 meaning mf should be freed from _base_interrupt
3160  *        0 means the mf is freed from this function.
3161  */
3162 static u8
3163 _scsih_sas_control_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
3164     u8 msix_index, u32 reply)
3165 {
3166         Mpi2SasIoUnitControlReply_t *mpi_reply =
3167             mpt2sas_base_get_reply_virt_addr(ioc, reply);
3168         if (likely(mpi_reply)) {
3169                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
3170                 "sc_complete:handle(0x%04x), (open) "
3171                 "smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
3172                 ioc->name, le16_to_cpu(mpi_reply->DevHandle), smid,
3173                 le16_to_cpu(mpi_reply->IOCStatus),
3174                 le32_to_cpu(mpi_reply->IOCLogInfo)));
3175         } else {
3176                 printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
3177                     ioc->name, __FILE__, __LINE__, __func__);
3178         }
3179         return 1;
3180 }
3181
3182 /**
3183  * _scsih_tm_tr_volume_send - send target reset request for volumes
3184  * @ioc: per adapter object
3185  * @handle: device handle
3186  * Context: interrupt time.
3187  *
3188  * This is designed to send muliple task management request at the same
3189  * time to the fifo. If the fifo is full, we will append the request,
3190  * and process it in a future completion.
3191  */
3192 static void
3193 _scsih_tm_tr_volume_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
3194 {
3195         Mpi2SCSITaskManagementRequest_t *mpi_request;
3196         u16 smid;
3197         struct _tr_list *delayed_tr;
3198
3199         if (ioc->shost_recovery || ioc->remove_host ||
3200             ioc->pci_error_recovery) {
3201                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
3202                    "progress!\n", __func__, ioc->name));
3203                 return;
3204         }
3205
3206         smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_volume_cb_idx);
3207         if (!smid) {
3208                 delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
3209                 if (!delayed_tr)
3210                         return;
3211                 INIT_LIST_HEAD(&delayed_tr->list);
3212                 delayed_tr->handle = handle;
3213                 list_add_tail(&delayed_tr->list, &ioc->delayed_tr_volume_list);
3214                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
3215                     "DELAYED:tr:handle(0x%04x), (open)\n",
3216                     ioc->name, handle));
3217                 return;
3218         }
3219
3220         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), "
3221             "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid,
3222             ioc->tm_tr_volume_cb_idx));
3223         mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
3224         memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
3225         mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
3226         mpi_request->DevHandle = cpu_to_le16(handle);
3227         mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
3228         mpt2sas_base_put_smid_hi_priority(ioc, smid);
3229 }
3230
3231 /**
3232  * _scsih_tm_volume_tr_complete - target reset completion
3233  * @ioc: per adapter object
3234  * @smid: system request message index
3235  * @msix_index: MSIX table index supplied by the OS
3236  * @reply: reply message frame(lower 32bit addr)
3237  * Context: interrupt time.
3238  *
3239  * Return 1 meaning mf should be freed from _base_interrupt
3240  *        0 means the mf is freed from this function.
3241  */
3242 static u8
3243 _scsih_tm_volume_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
3244     u8 msix_index, u32 reply)
3245 {
3246         u16 handle;
3247         Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
3248         Mpi2SCSITaskManagementReply_t *mpi_reply =
3249             mpt2sas_base_get_reply_virt_addr(ioc, reply);
3250
3251         if (ioc->shost_recovery || ioc->remove_host ||
3252             ioc->pci_error_recovery) {
3253                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in "
3254                    "progress!\n", __func__, ioc->name));
3255                 return 1;
3256         }
3257         if (unlikely(!mpi_reply)) {
3258                 printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
3259                     ioc->name, __FILE__, __LINE__, __func__);
3260                 return 1;
3261         }
3262         mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid);
3263         handle = le16_to_cpu(mpi_request_tm->DevHandle);
3264         if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
3265                 dewtprintk(ioc, printk("spurious interrupt: "
3266                     "handle(0x%04x:0x%04x), smid(%d)!!!\n", handle,
3267                     le16_to_cpu(mpi_reply->DevHandle), smid));
3268                 return 0;
3269         }
3270
3271         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
3272             "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
3273             "loginfo(0x%08x), completed(%d)\n", ioc->name,
3274             handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
3275             le32_to_cpu(mpi_reply->IOCLogInfo),
3276             le32_to_cpu(mpi_reply->TerminationCount)));
3277
3278         return _scsih_check_for_pending_tm(ioc, smid);
3279 }
3280
3281 /**
3282  * _scsih_tm_tr_complete -
3283  * @ioc: per adapter object
3284  * @smid: system request message index
3285  * @msix_index: MSIX table index supplied by the OS
3286  * @reply: reply message frame(lower 32bit addr)
3287  * Context: interrupt time.
3288  *
3289  * This is the target reset completion routine.
3290  * This code is part of the code to initiate the device removal
3291  * handshake protocol with controller firmware.
3292  * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE)
3293  *
3294  * Return 1 meaning mf should be freed from _base_interrupt
3295  *        0 means the mf is freed from this function.
3296  */
3297 static u8
3298 _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
3299     u32 reply)
3300 {
3301         u16 handle;
3302         Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
3303         Mpi2SCSITaskManagementReply_t *mpi_reply =
3304             mpt2sas_base_get_reply_virt_addr(ioc, reply);
3305         Mpi2SasIoUnitControlRequest_t *mpi_request;
3306         u16 smid_sas_ctrl;
3307         u32 ioc_state;
3308
3309         if (ioc->remove_host) {
3310                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been "
3311                    "removed\n", __func__, ioc->name));
3312                 return 1;
3313         } else if (ioc->pci_error_recovery) {
3314                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci "
3315                     "error recovery\n", __func__, ioc->name));
3316                 return 1;
3317         }
3318         ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
3319         if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
3320                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not "
3321                     "operational\n", __func__, ioc->name));
3322                 return 1;
3323         }
3324         if (unlikely(!mpi_reply)) {
3325                 printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
3326                     ioc->name, __FILE__, __LINE__, __func__);
3327                 return 1;
3328         }
3329         mpi_request_tm = mpt2sas_base_get_msg_frame(ioc, smid);
3330         handle = le16_to_cpu(mpi_request_tm->DevHandle);
3331         if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
3332                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "spurious interrupt: "
3333                     "handle(0x%04x:0x%04x), smid(%d)!!!\n", ioc->name, handle,
3334                     le16_to_cpu(mpi_reply->DevHandle), smid));
3335                 return 0;
3336         }
3337
3338         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
3339             "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
3340             "loginfo(0x%08x), completed(%d)\n", ioc->name,
3341             handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
3342             le32_to_cpu(mpi_reply->IOCLogInfo),
3343             le32_to_cpu(mpi_reply->TerminationCount)));
3344
3345         smid_sas_ctrl = mpt2sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx);
3346         if (!smid_sas_ctrl) {
3347                 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
3348                     ioc->name, __func__);
3349                 return 1;
3350         }
3351
3352         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sc_send:handle(0x%04x), "
3353             "(open), smid(%d), cb(%d)\n", ioc->name, handle, smid_sas_ctrl,
3354             ioc->tm_sas_control_cb_idx));
3355         mpi_request = mpt2sas_base_get_msg_frame(ioc, smid_sas_ctrl);
3356         memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
3357         mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
3358         mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
3359         mpi_request->DevHandle = mpi_request_tm->DevHandle;
3360         mpt2sas_base_put_smid_default(ioc, smid_sas_ctrl);
3361
3362         return _scsih_check_for_pending_tm(ioc, smid);
3363 }
3364
3365 /**
3366  * _scsih_check_for_pending_tm - check for pending task management
3367  * @ioc: per adapter object
3368  * @smid: system request message index
3369  *
3370  * This will check delayed target reset list, and feed the
3371  * next reqeust.
3372  *
3373  * Return 1 meaning mf should be freed from _base_interrupt
3374  *        0 means the mf is freed from this function.
3375  */
3376 static u8
3377 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid)
3378 {
3379         struct _tr_list *delayed_tr;
3380
3381         if (!list_empty(&ioc->delayed_tr_volume_list)) {
3382                 delayed_tr = list_entry(ioc->delayed_tr_volume_list.next,
3383                     struct _tr_list, list);
3384                 mpt2sas_base_free_smid(ioc, smid);
3385                 _scsih_tm_tr_volume_send(ioc, delayed_tr->handle);
3386                 list_del(&delayed_tr->list);
3387                 kfree(delayed_tr);
3388                 return 0;
3389         }
3390
3391         if (!list_empty(&ioc->delayed_tr_list)) {
3392                 delayed_tr = list_entry(ioc->delayed_tr_list.next,
3393                     struct _tr_list, list);
3394                 mpt2sas_base_free_smid(ioc, smid);
3395                 _scsih_tm_tr_send(ioc, delayed_tr->handle);
3396                 list_del(&delayed_tr->list);
3397                 kfree(delayed_tr);
3398                 return 0;
3399         }
3400
3401         return 1;
3402 }
3403
3404 /**
3405  * _scsih_check_topo_delete_events - sanity check on topo events
3406  * @ioc: per adapter object
3407  * @event_data: the event data payload
3408  *
3409  * This routine added to better handle cable breaker.
3410  *
3411  * This handles the case where driver receives multiple expander
3412  * add and delete events in a single shot.  When there is a delete event
3413  * the routine will void any pending add events waiting in the event queue.
3414  *
3415  * Return nothing.
3416  */
3417 static void
3418 _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc,
3419     Mpi2EventDataSasTopologyChangeList_t *event_data)
3420 {
3421         struct fw_event_work *fw_event;
3422         Mpi2EventDataSasTopologyChangeList_t *local_event_data;
3423         u16 expander_handle;
3424         struct _sas_node *sas_expander;
3425         unsigned long flags;
3426         int i, reason_code;
3427         u16 handle;
3428
3429         for (i = 0 ; i < event_data->NumEntries; i++) {
3430                 handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
3431                 if (!handle)
3432                         continue;
3433                 reason_code = event_data->PHY[i].PhyStatus &
3434                     MPI2_EVENT_SAS_TOPO_RC_MASK;
3435                 if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)
3436                         _scsih_tm_tr_send(ioc, handle);
3437         }
3438
3439         expander_handle = le16_to_cpu(event_data->ExpanderDevHandle);
3440         if (expander_handle < ioc->sas_hba.num_phys) {
3441                 _scsih_block_io_to_children_attached_directly(ioc, event_data);
3442                 return;
3443         }
3444         if (event_data->ExpStatus ==
3445             MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING) {
3446                 /* put expander attached devices into blocking state */
3447                 spin_lock_irqsave(&ioc->sas_node_lock, flags);
3448                 sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
3449                     expander_handle);
3450                 _scsih_block_io_to_children_attached_to_ex(ioc, sas_expander);
3451                 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
3452                 do {
3453                         handle = find_first_bit(ioc->blocking_handles,
3454                             ioc->facts.MaxDevHandle);
3455                         if (handle < ioc->facts.MaxDevHandle)
3456                                 _scsih_block_io_device(ioc, handle);
3457                 } while (test_and_clear_bit(handle, ioc->blocking_handles));
3458         } else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING)
3459                 _scsih_block_io_to_children_attached_directly(ioc, event_data);
3460
3461         if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
3462                 return;
3463
3464         /* mark ignore flag for pending events */
3465         spin_lock_irqsave(&ioc->fw_event_lock, flags);
3466         list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
3467                 if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
3468                     fw_event->ignore)
3469                         continue;
3470                 local_event_data = (Mpi2EventDataSasTopologyChangeList_t *)
3471                         fw_event->event_data;
3472                 if (local_event_data->ExpStatus ==
3473                     MPI2_EVENT_SAS_TOPO_ES_ADDED ||
3474                     local_event_data->ExpStatus ==
3475                     MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
3476                         if (le16_to_cpu(local_event_data->ExpanderDevHandle) ==
3477                             expander_handle) {
3478                                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
3479                                     "setting ignoring flag\n", ioc->name));
3480                                 fw_event->ignore = 1;
3481                         }
3482                 }
3483         }
3484         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
3485 }
3486
3487 /**
3488  * _scsih_set_volume_delete_flag - setting volume delete flag
3489  * @ioc: per adapter object
3490  * @handle: device handle
3491  *
3492  * This
3493  * Return nothing.
3494  */
3495 static void
3496 _scsih_set_volume_delete_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle)
3497 {
3498         struct _raid_device *raid_device;
3499         struct MPT2SAS_TARGET *sas_target_priv_data;
3500         unsigned long flags;
3501
3502         spin_lock_irqsave(&ioc->raid_device_lock, flags);
3503         raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
3504         if (raid_device && raid_device->starget &&
3505             raid_device->starget->hostdata) {
3506                 sas_target_priv_data =
3507                     raid_device->starget->hostdata;
3508                 sas_target_priv_data->deleted = 1;
3509                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
3510                     "setting delete flag: handle(0x%04x), "
3511                     "wwid(0x%016llx)\n", ioc->name, handle,
3512                     (unsigned long long) raid_device->wwid));
3513         }
3514         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
3515 }
3516
3517 /**
3518  * _scsih_set_volume_handle_for_tr - set handle for target reset to volume
3519  * @handle: input handle
3520  * @a: handle for volume a
3521  * @b: handle for volume b
3522  *
3523  * IR firmware only supports two raid volumes.  The purpose of this
3524  * routine is to set the volume handle in either a or b. When the given
3525  * input handle is non-zero, or when a and b have not been set before.
3526  */
3527 static void
3528 _scsih_set_volume_handle_for_tr(u16 handle, u16 *a, u16 *b)
3529 {
3530         if (!handle || handle == *a || handle == *b)
3531                 return;
3532         if (!*a)
3533                 *a = handle;
3534         else if (!*b)
3535                 *b = handle;
3536 }
3537
3538 /**
3539  * _scsih_check_ir_config_unhide_events - check for UNHIDE events
3540  * @ioc: per adapter object
3541  * @event_data: the event data payload
3542  * Context: interrupt time.
3543  *
3544  * This routine will send target reset to volume, followed by target
3545  * resets to the PDs. This is called when a PD has been removed, or
3546  * volume has been deleted or removed. When the target reset is sent
3547  * to volume, the PD target resets need to be queued to start upon
3548  * completion of the volume target reset.
3549  *
3550  * Return nothing.
3551  */
3552 static void
3553 _scsih_check_ir_config_unhide_events(struct MPT2SAS_ADAPTER *ioc,
3554     Mpi2EventDataIrConfigChangeList_t *event_data)
3555 {
3556         Mpi2EventIrConfigElement_t *element;
3557         int i;
3558         u16 handle, volume_handle, a, b;
3559         struct _tr_list *delayed_tr;
3560
3561         a = 0;
3562         b = 0;
3563
3564         if (ioc->is_warpdrive)
3565                 return;
3566
3567         /* Volume Resets for Deleted or Removed */
3568         element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
3569         for (i = 0; i < event_data->NumElements; i++, element++) {
3570                 if (element->ReasonCode ==
3571                     MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED ||
3572                     element->ReasonCode ==
3573                     MPI2_EVENT_IR_CHANGE_RC_REMOVED) {
3574                         volume_handle = le16_to_cpu(element->VolDevHandle);
3575                         _scsih_set_volume_delete_flag(ioc, volume_handle);
3576                         _scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
3577                 }
3578         }
3579
3580         /* Volume Resets for UNHIDE events */
3581         element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
3582         for (i = 0; i < event_data->NumElements; i++, element++) {
3583                 if (le32_to_cpu(event_data->Flags) &
3584                     MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
3585                         continue;
3586                 if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_UNHIDE) {
3587                         volume_handle = le16_to_cpu(element->VolDevHandle);
3588                         _scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
3589                 }
3590         }
3591
3592         if (a)
3593                 _scsih_tm_tr_volume_send(ioc, a);
3594         if (b)
3595                 _scsih_tm_tr_volume_send(ioc, b);
3596
3597         /* PD target resets */
3598         element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
3599         for (i = 0; i < event_data->NumElements; i++, element++) {
3600                 if (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_UNHIDE)
3601                         continue;
3602                 handle = le16_to_cpu(element->PhysDiskDevHandle);
3603                 volume_handle = le16_to_cpu(element->VolDevHandle);
3604                 clear_bit(handle, ioc->pd_handles);
3605                 if (!volume_handle)
3606                         _scsih_tm_tr_send(ioc, handle);
3607                 else if (volume_handle == a || volume_handle == b) {
3608                         delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
3609                         BUG_ON(!delayed_tr);
3610                         INIT_LIST_HEAD(&delayed_tr->list);
3611                         delayed_tr->handle = handle;
3612                         list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
3613                         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
3614                             "DELAYED:tr:handle(0x%04x), (open)\n", ioc->name,
3615                             handle));
3616                 } else
3617                         _scsih_tm_tr_send(ioc, handle);
3618         }
3619 }
3620
3621
3622 /**
3623  * _scsih_check_volume_delete_events - set delete flag for volumes
3624  * @ioc: per adapter object
3625  * @event_data: the event data payload
3626  * Context: interrupt time.
3627  *
3628  * This will handle the case when the cable connected to entire volume is
3629  * pulled. We will take care of setting the deleted flag so normal IO will
3630  * not be sent.
3631  *
3632  * Return nothing.
3633  */
3634 static void
3635 _scsih_check_volume_delete_events(struct MPT2SAS_ADAPTER *ioc,
3636     Mpi2EventDataIrVolume_t *event_data)
3637 {
3638         u32 state;
3639
3640         if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
3641                 return;
3642         state = le32_to_cpu(event_data->NewValue);
3643         if (state == MPI2_RAID_VOL_STATE_MISSING || state ==
3644             MPI2_RAID_VOL_STATE_FAILED)
3645                 _scsih_set_volume_delete_flag(ioc,
3646                     le16_to_cpu(event_data->VolDevHandle));
3647 }
3648
3649 /**
3650  * _scsih_flush_running_cmds - completing outstanding commands.
3651  * @ioc: per adapter object
3652  *
3653  * The flushing out of all pending scmd commands following host reset,
3654  * where all IO is dropped to the floor.
3655  *
3656  * Return nothing.
3657  */
3658 static void
3659 _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc)
3660 {
3661         struct scsi_cmnd *scmd;
3662         u16 smid;
3663         u16 count = 0;
3664
3665         for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
3666                 scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
3667                 if (!scmd)
3668                         continue;
3669                 count++;
3670                 mpt2sas_base_free_smid(ioc, smid);
3671                 scsi_dma_unmap(scmd);
3672                 if (ioc->pci_error_recovery)
3673                         scmd->result = DID_NO_CONNECT << 16;
3674                 else
3675                         scmd->result = DID_RESET << 16;
3676                 scmd->scsi_done(scmd);
3677         }
3678         dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "completing %d cmds\n",
3679             ioc->name, count));
3680 }
3681
3682 /**
3683  * _scsih_setup_eedp - setup MPI request for EEDP transfer
3684  * @scmd: pointer to scsi command object
3685  * @mpi_request: pointer to the SCSI_IO reqest message frame
3686  *
3687  * Supporting protection 1 and 3.
3688  *
3689  * Returns nothing
3690  */
3691 static void
3692 _scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request)
3693 {
3694         u16 eedp_flags;
3695         unsigned char prot_op = scsi_get_prot_op(scmd);
3696         unsigned char prot_type = scsi_get_prot_type(scmd);
3697
3698         if (prot_type == SCSI_PROT_DIF_TYPE0 || prot_op == SCSI_PROT_NORMAL)
3699                 return;
3700
3701         if (prot_op ==  SCSI_PROT_READ_STRIP)
3702                 eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP;
3703         else if (prot_op ==  SCSI_PROT_WRITE_INSERT)
3704                 eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
3705         else
3706                 return;
3707
3708         switch (prot_type) {
3709         case SCSI_PROT_DIF_TYPE1:
3710         case SCSI_PROT_DIF_TYPE2:
3711
3712                 /*
3713                 * enable ref/guard checking
3714                 * auto increment ref tag
3715                 */
3716                 eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
3717                     MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
3718                     MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
3719                 mpi_request->CDB.EEDP32.PrimaryReferenceTag =
3720                     cpu_to_be32(scsi_get_lba(scmd));
3721                 break;
3722
3723         case SCSI_PROT_DIF_TYPE3:
3724
3725                 /*
3726                 * enable guard checking
3727                 */
3728                 eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
3729                 break;
3730         }
3731         mpi_request->EEDPBlockSize = cpu_to_le32(scmd->device->sector_size);
3732         mpi_request->EEDPFlags = cpu_to_le16(eedp_flags);
3733 }
3734
3735 /**
3736  * _scsih_eedp_error_handling - return sense code for EEDP errors
3737  * @scmd: pointer to scsi command object
3738  * @ioc_status: ioc status
3739  *
3740  * Returns nothing
3741  */
3742 static void
3743 _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
3744 {
3745         u8 ascq;
3746
3747         switch (ioc_status) {
3748         case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
3749                 ascq = 0x01;
3750                 break;
3751         case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
3752                 ascq = 0x02;
3753                 break;
3754         case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
3755                 ascq = 0x03;
3756                 break;
3757         default:
3758                 ascq = 0x00;
3759                 break;
3760         }
3761
3762         scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST, 0x10, ascq);
3763         scmd->result = DRIVER_SENSE << 24 | (DID_ABORT << 16) |
3764             SAM_STAT_CHECK_CONDITION;
3765 }
3766
3767 /**
3768  * _scsih_scsi_direct_io_get - returns direct io flag
3769  * @ioc: per adapter object
3770  * @smid: system request message index
3771  *
3772  * Returns the smid stored scmd pointer.
3773  */
3774 static inline u8
3775 _scsih_scsi_direct_io_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
3776 {
3777         return ioc->scsi_lookup[smid - 1].direct_io;
3778 }
3779
3780 /**
3781  * _scsih_scsi_direct_io_set - sets direct io flag
3782  * @ioc: per adapter object
3783  * @smid: system request message index
3784  * @direct_io: Zero or non-zero value to set in the direct_io flag
3785  *
3786  * Returns Nothing.
3787  */
3788 static inline void
3789 _scsih_scsi_direct_io_set(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 direct_io)
3790 {
3791         ioc->scsi_lookup[smid - 1].direct_io = direct_io;
3792 }
3793
3794
3795 /**
3796  * _scsih_setup_direct_io - setup MPI request for WARPDRIVE Direct I/O
3797  * @ioc: per adapter object
3798  * @scmd: pointer to scsi command object
3799  * @raid_device: pointer to raid device data structure
3800  * @mpi_request: pointer to the SCSI_IO reqest message frame
3801  * @smid: system request message index
3802  *
3803  * Returns nothing
3804  */
3805 static void
3806 _scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
3807         struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
3808         u16 smid)
3809 {
3810         sector_t v_lba, p_lba, stripe_off, column, io_size;
3811         u32 stripe_sz, stripe_exp;
3812         u8 num_pds, cmd = scmd->cmnd[0];
3813
3814         if (cmd != READ_10 && cmd != WRITE_10 &&
3815             cmd != READ_16 && cmd != WRITE_16)
3816                 return;
3817
3818         if (cmd == READ_10 || cmd == WRITE_10)
3819                 v_lba = get_unaligned_be32(&mpi_request->CDB.CDB32[2]);
3820         else
3821                 v_lba = get_unaligned_be64(&mpi_request->CDB.CDB32[2]);
3822
3823         io_size = scsi_bufflen(scmd) >> raid_device->block_exponent;
3824
3825         if (v_lba + io_size - 1 > raid_device->max_lba)
3826                 return;
3827
3828         stripe_sz = raid_device->stripe_sz;
3829         stripe_exp = raid_device->stripe_exponent;
3830         stripe_off = v_lba & (stripe_sz - 1);
3831
3832         /* Return unless IO falls within a stripe */
3833         if (stripe_off + io_size > stripe_sz)
3834                 return;
3835
3836         num_pds = raid_device->num_pds;
3837         p_lba = v_lba >> stripe_exp;
3838         column = sector_div(p_lba, num_pds);
3839         p_lba = (p_lba << stripe_exp) + stripe_off;
3840
3841         mpi_request->DevHandle = cpu_to_le16(raid_device->pd_handle[column]);
3842
3843         if (cmd == READ_10 || cmd == WRITE_10)
3844                 put_unaligned_be32(lower_32_bits(p_lba),
3845                                    &mpi_request->CDB.CDB32[2]);
3846         else
3847                 put_unaligned_be64(p_lba, &mpi_request->CDB.CDB32[2]);
3848
3849         _scsih_scsi_direct_io_set(ioc, smid, 1);
3850 }
3851
3852 /**
3853  * _scsih_qcmd - main scsi request entry point
3854  * @scmd: pointer to scsi command object
3855  * @done: function pointer to be invoked on completion
3856  *
3857  * The callback index is set inside `ioc->scsi_io_cb_idx`.
3858  *
3859  * Returns 0 on success.  If there's a failure, return either:
3860  * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
3861  * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
3862  */
3863 static int
3864 _scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
3865 {
3866         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
3867         struct MPT2SAS_DEVICE *sas_device_priv_data;
3868         struct MPT2SAS_TARGET *sas_target_priv_data;
3869         struct _raid_device *raid_device;
3870         Mpi2SCSIIORequest_t *mpi_request;
3871         u32 mpi_control;
3872         u16 smid;
3873
3874         sas_device_priv_data = scmd->device->hostdata;
3875         if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
3876                 scmd->result = DID_NO_CONNECT << 16;
3877                 scmd->scsi_done(scmd);
3878                 return 0;
3879         }
3880
3881         if (ioc->pci_error_recovery || ioc->remove_host) {
3882                 scmd->result = DID_NO_CONNECT << 16;
3883                 scmd->scsi_done(scmd);
3884                 return 0;
3885         }
3886
3887         sas_target_priv_data = sas_device_priv_data->sas_target;
3888         /* invalid device handle */
3889         if (sas_target_priv_data->handle == MPT2SAS_INVALID_DEVICE_HANDLE) {
3890                 scmd->result = DID_NO_CONNECT << 16;
3891                 scmd->scsi_done(scmd);
3892                 return 0;
3893         }
3894
3895         /* host recovery or link resets sent via IOCTLs */
3896         if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
3897                 return SCSI_MLQUEUE_HOST_BUSY;
3898         /* device busy with task management */
3899         else if (sas_device_priv_data->block || sas_target_priv_data->tm_busy)
3900                 return SCSI_MLQUEUE_DEVICE_BUSY;
3901         /* device has been deleted */
3902         else if (sas_target_priv_data->deleted) {
3903                 scmd->result = DID_NO_CONNECT << 16;
3904                 scmd->scsi_done(scmd);
3905                 return 0;
3906         }
3907
3908         if (scmd->sc_data_direction == DMA_FROM_DEVICE)
3909                 mpi_control = MPI2_SCSIIO_CONTROL_READ;
3910         else if (scmd->sc_data_direction == DMA_TO_DEVICE)
3911                 mpi_control = MPI2_SCSIIO_CONTROL_WRITE;
3912         else
3913                 mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
3914
3915         /* set tags */
3916         mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
3917
3918         /* Make sure Device is not raid volume.
3919          * We do not expose raid functionality to upper layer for warpdrive.
3920          */
3921         if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) &&
3922             sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
3923                 mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
3924
3925         smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
3926         if (!smid) {
3927                 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
3928                     ioc->name, __func__);
3929                 goto out;
3930         }
3931         mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
3932         memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
3933         _scsih_setup_eedp(scmd, mpi_request);
3934         if (scmd->cmd_len == 32)
3935                 mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
3936         mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
3937         if (sas_device_priv_data->sas_target->flags &
3938             MPT_TARGET_FLAGS_RAID_COMPONENT)
3939                 mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
3940         else
3941         mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
3942         mpi_request->DevHandle =
3943             cpu_to_le16(sas_device_priv_data->sas_target->handle);
3944         mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
3945         mpi_request->Control = cpu_to_le32(mpi_control);
3946         mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len);
3947         mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR;
3948         mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
3949         mpi_request->SenseBufferLowAddress =
3950             mpt2sas_base_get_sense_buffer_dma(ioc, smid);
3951         mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
3952         mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI +
3953             MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR);
3954         mpi_request->VF_ID = 0; /* TODO */
3955         mpi_request->VP_ID = 0;
3956         int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
3957             mpi_request->LUN);
3958         memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
3959
3960         if (!mpi_request->DataLength) {
3961                 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request->SGL);
3962         } else {
3963                 if (_scsih_build_scatter_gather(ioc, scmd, smid)) {
3964                         mpt2sas_base_free_smid(ioc, smid);
3965                         goto out;
3966                 }
3967         }
3968
3969         raid_device = sas_target_priv_data->raid_device;
3970         if (raid_device && raid_device->direct_io_enabled)
3971                 _scsih_setup_direct_io(ioc, scmd, raid_device, mpi_request,
3972                     smid);
3973
3974         if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST))
3975                 mpt2sas_base_put_smid_scsi_io(ioc, smid,
3976                     le16_to_cpu(mpi_request->DevHandle));
3977         else
3978                 mpt2sas_base_put_smid_default(ioc, smid);
3979         return 0;
3980
3981  out:
3982         return SCSI_MLQUEUE_HOST_BUSY;
3983 }
3984
3985 /**
3986  * _scsih_normalize_sense - normalize descriptor and fixed format sense data
3987  * @sense_buffer: sense data returned by target
3988  * @data: normalized skey/asc/ascq
3989  *
3990  * Return nothing.
3991  */
3992 static void
3993 _scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
3994 {
3995         if ((sense_buffer[0] & 0x7F) >= 0x72) {
3996                 /* descriptor format */
3997                 data->skey = sense_buffer[1] & 0x0F;
3998                 data->asc = sense_buffer[2];
3999                 data->ascq = sense_buffer[3];
4000         } else {
4001                 /* fixed format */
4002                 data->skey = sense_buffer[2] & 0x0F;
4003                 data->asc = sense_buffer[12];
4004                 data->ascq = sense_buffer[13];
4005         }
4006 }
4007
4008 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
4009 /**
4010  * _scsih_scsi_ioc_info - translated non-successful SCSI_IO request
4011  * @ioc: per adapter object
4012  * @scmd: pointer to scsi command object
4013  * @mpi_reply: reply mf payload returned from firmware
4014  *
4015  * scsi_status - SCSI Status code returned from target device
4016  * scsi_state - state info associated with SCSI_IO determined by ioc
4017  * ioc_status - ioc supplied status info
4018  *
4019  * Return nothing.
4020  */
4021 static void
4022 _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
4023     Mpi2SCSIIOReply_t *mpi_reply, u16 smid)
4024 {
4025         u32 response_info;
4026         u8 *response_bytes;
4027         u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
4028             MPI2_IOCSTATUS_MASK;
4029         u8 scsi_state = mpi_reply->SCSIState;
4030         u8 scsi_status = mpi_reply->SCSIStatus;
4031         char *desc_ioc_state = NULL;
4032         char *desc_scsi_status = NULL;
4033         char *desc_scsi_state = ioc->tmp_string;
4034         u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
4035         struct _sas_device *sas_device = NULL;
4036         unsigned long flags;
4037         struct scsi_target *starget = scmd->device->sdev_target;
4038         struct MPT2SAS_TARGET *priv_target = starget->hostdata;
4039         char *device_str = NULL;
4040
4041         if (!priv_target)
4042                 return;
4043
4044         if (ioc->hide_ir_msg)
4045                 device_str = "WarpDrive";
4046         else
4047                 device_str = "volume";
4048
4049         if (log_info == 0x31170000)
4050                 return;
4051
4052         switch (ioc_status) {
4053         case MPI2_IOCSTATUS_SUCCESS:
4054                 desc_ioc_state = "success";
4055                 break;
4056         case MPI2_IOCSTATUS_INVALID_FUNCTION:
4057                 desc_ioc_state = "invalid function";
4058                 break;
4059         case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
4060                 desc_ioc_state = "scsi recovered error";
4061                 break;
4062         case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
4063                 desc_ioc_state = "scsi invalid dev handle";
4064                 break;
4065         case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
4066                 desc_ioc_state = "scsi device not there";
4067                 break;
4068         case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
4069                 desc_ioc_state = "scsi data overrun";
4070                 break;
4071         case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
4072                 desc_ioc_state = "scsi data underrun";
4073                 break;
4074         case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
4075                 desc_ioc_state = "scsi io data error";
4076                 break;
4077         case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
4078                 desc_ioc_state = "scsi protocol error";
4079                 break;
4080         case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
4081                 desc_ioc_state = "scsi task terminated";
4082                 break;
4083         case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
4084                 desc_ioc_state = "scsi residual mismatch";
4085                 break;
4086         case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
4087                 desc_ioc_state = "scsi task mgmt failed";
4088                 break;
4089         case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
4090                 desc_ioc_state = "scsi ioc terminated";
4091                 break;
4092         case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
4093                 desc_ioc_state = "scsi ext terminated";
4094                 break;
4095         case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
4096                 desc_ioc_state = "eedp guard error";
4097                 break;
4098         case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
4099                 desc_ioc_state = "eedp ref tag error";
4100                 break;
4101         case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
4102                 desc_ioc_state = "eedp app tag error";
4103                 break;
4104         default:
4105                 desc_ioc_state = "unknown";
4106                 break;
4107         }
4108
4109         switch (scsi_status) {
4110         case MPI2_SCSI_STATUS_GOOD:
4111                 desc_scsi_status = "good";
4112                 break;
4113         case MPI2_SCSI_STATUS_CHECK_CONDITION:
4114                 desc_scsi_status = "check condition";
4115                 break;
4116         case MPI2_SCSI_STATUS_CONDITION_MET:
4117                 desc_scsi_status = "condition met";
4118                 break;
4119         case MPI2_SCSI_STATUS_BUSY:
4120                 desc_scsi_status = "busy";
4121                 break;
4122         case MPI2_SCSI_STATUS_INTERMEDIATE:
4123                 desc_scsi_status = "intermediate";
4124                 break;
4125         case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET:
4126                 desc_scsi_status = "intermediate condmet";
4127                 break;
4128         case MPI2_SCSI_STATUS_RESERVATION_CONFLICT:
4129                 desc_scsi_status = "reservation conflict";
4130                 break;
4131         case MPI2_SCSI_STATUS_COMMAND_TERMINATED:
4132                 desc_scsi_status = "command terminated";
4133                 break;
4134         case MPI2_SCSI_STATUS_TASK_SET_FULL:
4135                 desc_scsi_status = "task set full";
4136                 break;
4137         case MPI2_SCSI_STATUS_ACA_ACTIVE:
4138                 desc_scsi_status = "aca active";
4139                 break;
4140         case MPI2_SCSI_STATUS_TASK_ABORTED:
4141                 desc_scsi_status = "task aborted";
4142                 break;
4143         default:
4144                 desc_scsi_status = "unknown";
4145                 break;
4146         }
4147
4148         desc_scsi_state[0] = '\0';
4149         if (!scsi_state)
4150                 desc_scsi_state = " ";
4151         if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
4152                 strcat(desc_scsi_state, "response info ");
4153         if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
4154                 strcat(desc_scsi_state, "state terminated ");
4155         if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS)
4156                 strcat(desc_scsi_state, "no status ");
4157         if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED)
4158                 strcat(desc_scsi_state, "autosense failed ");
4159         if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)
4160                 strcat(desc_scsi_state, "autosense valid ");
4161
4162         scsi_print_command(scmd);
4163
4164         if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
4165                 printk(MPT2SAS_WARN_FMT "\t%s wwid(0x%016llx)\n", ioc->name,
4166                     device_str, (unsigned long long)priv_target->sas_address);
4167         } else {
4168                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
4169                 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
4170                     priv_target->sas_address);
4171                 if (sas_device) {
4172                         printk(MPT2SAS_WARN_FMT "\tsas_address(0x%016llx), "
4173                             "phy(%d)\n", ioc->name, sas_device->sas_address,
4174                             sas_device->phy);
4175                         printk(MPT2SAS_WARN_FMT
4176                             "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
4177                             ioc->name, sas_device->enclosure_logical_id,
4178                             sas_device->slot);
4179                 }
4180                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
4181         }
4182
4183         printk(MPT2SAS_WARN_FMT "\thandle(0x%04x), ioc_status(%s)(0x%04x), "
4184             "smid(%d)\n", ioc->name, le16_to_cpu(mpi_reply->DevHandle),
4185             desc_ioc_state, ioc_status, smid);
4186         printk(MPT2SAS_WARN_FMT "\trequest_len(%d), underflow(%d), "
4187             "resid(%d)\n", ioc->name, scsi_bufflen(scmd), scmd->underflow,
4188             scsi_get_resid(scmd));
4189         printk(MPT2SAS_WARN_FMT "\ttag(%d), transfer_count(%d), "
4190             "sc->result(0x%08x)\n", ioc->name, le16_to_cpu(mpi_reply->TaskTag),
4191             le32_to_cpu(mpi_reply->TransferCount), scmd->result);
4192         printk(MPT2SAS_WARN_FMT "\tscsi_status(%s)(0x%02x), "
4193             "scsi_state(%s)(0x%02x)\n", ioc->name, desc_scsi_status,
4194             scsi_status, desc_scsi_state, scsi_state);
4195
4196         if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
4197                 struct sense_info data;
4198                 _scsih_normalize_sense(scmd->sense_buffer, &data);
4199                 printk(MPT2SAS_WARN_FMT "\t[sense_key,asc,ascq]: "
4200                     "[0x%02x,0x%02x,0x%02x], count(%d)\n", ioc->name, data.skey,
4201                     data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount));
4202         }
4203
4204         if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
4205                 response_info = le32_to_cpu(mpi_reply->ResponseInfo);
4206                 response_bytes = (u8 *)&response_info;
4207                 _scsih_response_code(ioc, response_bytes[0]);
4208         }
4209 }
4210 #endif
4211
4212 /**
4213  * _scsih_turn_on_pfa_led - illuminate PFA LED
4214  * @ioc: per adapter object
4215  * @handle: device handle
4216  * Context: process
4217  *
4218  * Return nothing.
4219  */
4220 static void
4221 _scsih_turn_on_pfa_led(struct MPT2SAS_ADAPTER *ioc, u16 handle)
4222 {
4223         Mpi2SepReply_t mpi_reply;
4224         Mpi2SepRequest_t mpi_request;
4225         struct _sas_device *sas_device;
4226
4227         sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
4228         if (!sas_device)
4229                 return;
4230
4231         memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
4232         mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
4233         mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
4234         mpi_request.SlotStatus =
4235             cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
4236         mpi_request.DevHandle = cpu_to_le16(handle);
4237         mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS;
4238         if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
4239             &mpi_request)) != 0) {
4240                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
4241                 __FILE__, __LINE__, __func__);
4242                 return;
4243         }
4244         sas_device->pfa_led_on = 1;
4245
4246
4247         if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
4248                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
4249                  "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
4250                  ioc->name, le16_to_cpu(mpi_reply.IOCStatus),
4251                  le32_to_cpu(mpi_reply.IOCLogInfo)));
4252                 return;
4253         }
4254 }
4255
4256 /**
4257  * _scsih_turn_off_pfa_led - turn off PFA LED
4258  * @ioc: per adapter object
4259  * @sas_device: sas device whose PFA LED has to turned off
4260  * Context: process
4261  *
4262  * Return nothing.
4263  */
4264 static void
4265 _scsih_turn_off_pfa_led(struct MPT2SAS_ADAPTER *ioc,
4266         struct _sas_device *sas_device)
4267 {
4268         Mpi2SepReply_t mpi_reply;
4269         Mpi2SepRequest_t mpi_request;
4270
4271         memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
4272         mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
4273         mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
4274         mpi_request.SlotStatus = 0;
4275         mpi_request.Slot = cpu_to_le16(sas_device->slot);
4276         mpi_request.DevHandle = 0;
4277         mpi_request.EnclosureHandle = cpu_to_le16(sas_device->enclosure_handle);
4278         mpi_request.Flags = MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS;
4279         if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
4280             &mpi_request)) != 0) {
4281                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name,
4282                 __FILE__, __LINE__, __func__);
4283                 return;
4284         }
4285
4286         if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
4287                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "enclosure_processor: "
4288                     "ioc_status (0x%04x), loginfo(0x%08x)\n", ioc->name,
4289                     le16_to_cpu(mpi_reply.IOCStatus),
4290                     le32_to_cpu(mpi_reply.IOCLogInfo)));
4291                 return;
4292         }
4293 }
4294
4295 /**
4296  * _scsih_send_event_to_turn_on_pfa_led - fire delayed event
4297  * @ioc: per adapter object
4298  * @handle: device handle
4299  * Context: interrupt.
4300  *
4301  * Return nothing.
4302  */
4303 static void
4304 _scsih_send_event_to_turn_on_pfa_led(struct MPT2SAS_ADAPTER *ioc, u16 handle)
4305 {
4306         struct fw_event_work *fw_event;
4307
4308         fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
4309         if (!fw_event)
4310                 return;
4311         fw_event->event = MPT2SAS_TURN_ON_PFA_LED;
4312         fw_event->device_handle = handle;
4313         fw_event->ioc = ioc;
4314         _scsih_fw_event_add(ioc, fw_event);
4315 }
4316
4317 /**
4318  * _scsih_smart_predicted_fault - process smart errors
4319  * @ioc: per adapter object
4320  * @handle: device handle
4321  * Context: interrupt.
4322  *
4323  * Return nothing.
4324  */
4325 static void
4326 _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle)
4327 {
4328         struct scsi_target *starget;
4329         struct MPT2SAS_TARGET *sas_target_priv_data;
4330         Mpi2EventNotificationReply_t *event_reply;
4331         Mpi2EventDataSasDeviceStatusChange_t *event_data;
4332         struct _sas_device *sas_device;
4333         ssize_t sz;
4334         unsigned long flags;
4335
4336         /* only handle non-raid devices */
4337         spin_lock_irqsave(&ioc->sas_device_lock, flags);
4338         sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
4339         if (!sas_device) {
4340                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
4341                 return;
4342         }
4343         starget = sas_device->starget;
4344         sas_target_priv_data = starget->hostdata;
4345
4346         if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) ||
4347            ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))) {
4348                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
4349                 return;
4350         }
4351         starget_printk(KERN_WARNING, starget, "predicted fault\n");
4352         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
4353
4354         if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM)
4355                 _scsih_send_event_to_turn_on_pfa_led(ioc, handle);
4356
4357         /* insert into event log */
4358         sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
4359              sizeof(Mpi2EventDataSasDeviceStatusChange_t);
4360         event_reply = kzalloc(sz, GFP_ATOMIC);
4361         if (!event_reply) {
4362                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4363                     ioc->name, __FILE__, __LINE__, __func__);
4364                 return;
4365         }
4366
4367         event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
4368         event_reply->Event =
4369             cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
4370         event_reply->MsgLength = sz/4;
4371         event_reply->EventDataLength =
4372             cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4);
4373         event_data = (Mpi2EventDataSasDeviceStatusChange_t *)
4374             event_reply->EventData;
4375         event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA;
4376         event_data->ASC = 0x5D;
4377         event_data->DevHandle = cpu_to_le16(handle);
4378         event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address);
4379         mpt2sas_ctl_add_to_event_log(ioc, event_reply);
4380         kfree(event_reply);
4381 }
4382
4383 /**
4384  * _scsih_io_done - scsi request callback
4385  * @ioc: per adapter object
4386  * @smid: system request message index
4387  * @msix_index: MSIX table index supplied by the OS
4388  * @reply: reply message frame(lower 32bit addr)
4389  *
4390  * Callback handler when using _scsih_qcmd.
4391  *
4392  * Return 1 meaning mf should be freed from _base_interrupt
4393  *        0 means the mf is freed from this function.
4394  */
4395 static u8
4396 _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
4397 {
4398         Mpi2SCSIIORequest_t *mpi_request;
4399         Mpi2SCSIIOReply_t *mpi_reply;
4400         struct scsi_cmnd *scmd;
4401         u16 ioc_status;
4402         u32 xfer_cnt;
4403         u8 scsi_state;
4404         u8 scsi_status;
4405         u32 log_info;
4406         struct MPT2SAS_DEVICE *sas_device_priv_data;
4407         u32 response_code = 0;
4408         unsigned long flags;
4409
4410         mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
4411         scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
4412         if (scmd == NULL)
4413                 return 1;
4414
4415         mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
4416
4417         if (mpi_reply == NULL) {
4418                 scmd->result = DID_OK << 16;
4419                 goto out;
4420         }
4421
4422         sas_device_priv_data = scmd->device->hostdata;
4423         if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
4424              sas_device_priv_data->sas_target->deleted) {
4425                 scmd->result = DID_NO_CONNECT << 16;
4426                 goto out;
4427         }
4428         ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
4429         /*
4430          * WARPDRIVE: If direct_io is set then it is directIO,
4431          * the failed direct I/O should be redirected to volume
4432          */
4433         if (_scsih_scsi_direct_io_get(ioc, smid) &&
4434             ((ioc_status & MPI2_IOCSTATUS_MASK)
4435             != MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) {
4436                 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
4437                 ioc->scsi_lookup[smid - 1].scmd = scmd;
4438                 _scsih_scsi_direct_io_set(ioc, smid, 0);
4439                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
4440                 memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
4441                 mpi_request->DevHandle =
4442                     cpu_to_le16(sas_device_priv_data->sas_target->handle);
4443                 mpt2sas_base_put_smid_scsi_io(ioc, smid,
4444                     sas_device_priv_data->sas_target->handle);
4445                 return 0;
4446         }
4447
4448
4449         /* turning off TLR */
4450         scsi_state = mpi_reply->SCSIState;
4451         if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
4452                 response_code =
4453                     le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
4454         if (!sas_device_priv_data->tlr_snoop_check) {
4455                 sas_device_priv_data->tlr_snoop_check++;
4456         /* Make sure Device is not raid volume.
4457          * We do not expose raid functionality to upper layer for warpdrive.
4458          */
4459         if (!ioc->is_warpdrive && !_scsih_is_raid(&scmd->device->sdev_gendev) &&
4460                 sas_is_tlr_enabled(scmd->device) &&
4461                     response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
4462                         sas_disable_tlr(scmd->device);
4463                         sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n");
4464                 }
4465         }
4466
4467         xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
4468         scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
4469         if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
4470                 log_info =  le32_to_cpu(mpi_reply->IOCLogInfo);
4471         else
4472                 log_info = 0;
4473         ioc_status &= MPI2_IOCSTATUS_MASK;
4474         scsi_status = mpi_reply->SCSIStatus;
4475
4476         if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
4477             (scsi_status == MPI2_SCSI_STATUS_BUSY ||
4478              scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT ||
4479              scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) {
4480                 ioc_status = MPI2_IOCSTATUS_SUCCESS;
4481         }
4482
4483         if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
4484                 struct sense_info data;
4485                 const void *sense_data = mpt2sas_base_get_sense_buffer(ioc,
4486                     smid);
4487                 u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
4488                     le32_to_cpu(mpi_reply->SenseCount));
4489                 memcpy(scmd->sense_buffer, sense_data, sz);
4490                 _scsih_normalize_sense(scmd->sense_buffer, &data);
4491                 /* failure prediction threshold exceeded */
4492                 if (data.asc == 0x5D)
4493                         _scsih_smart_predicted_fault(ioc,
4494                             le16_to_cpu(mpi_reply->DevHandle));
4495         }
4496
4497         switch (ioc_status) {
4498         case MPI2_IOCSTATUS_BUSY:
4499         case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
4500                 scmd->result = SAM_STAT_BUSY;
4501                 break;
4502
4503         case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
4504                 scmd->result = DID_NO_CONNECT << 16;
4505                 break;
4506
4507         case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
4508                 if (sas_device_priv_data->block) {
4509                         scmd->result = DID_TRANSPORT_DISRUPTED << 16;
4510                         goto out;
4511                 }
4512                 scmd->result = DID_SOFT_ERROR << 16;
4513                 break;
4514         case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
4515         case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
4516                 scmd->result = DID_RESET << 16;
4517                 break;
4518
4519         case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
4520                 if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt))
4521                         scmd->result = DID_SOFT_ERROR << 16;
4522                 else
4523                         scmd->result = (DID_OK << 16) | scsi_status;
4524                 break;
4525
4526         case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
4527                 scmd->result = (DID_OK << 16) | scsi_status;
4528
4529                 if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID))
4530                         break;
4531
4532                 if (xfer_cnt < scmd->underflow) {
4533                         if (scsi_status == SAM_STAT_BUSY)
4534                                 scmd->result = SAM_STAT_BUSY;
4535                         else
4536                                 scmd->result = DID_SOFT_ERROR << 16;
4537                 } else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
4538                      MPI2_SCSI_STATE_NO_SCSI_STATUS))
4539                         scmd->result = DID_SOFT_ERROR << 16;
4540                 else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
4541                         scmd->result = DID_RESET << 16;
4542                 else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) {
4543                         mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID;
4544                         mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION;
4545                         scmd->result = (DRIVER_SENSE << 24) |
4546                             SAM_STAT_CHECK_CONDITION;
4547                         scmd->sense_buffer[0] = 0x70;
4548                         scmd->sense_buffer[2] = ILLEGAL_REQUEST;
4549                         scmd->sense_buffer[12] = 0x20;
4550                         scmd->sense_buffer[13] = 0;
4551                 }
4552                 break;
4553
4554         case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
4555                 scsi_set_resid(scmd, 0);
4556         case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
4557         case MPI2_IOCSTATUS_SUCCESS:
4558                 scmd->result = (DID_OK << 16) | scsi_status;
4559                 if (response_code ==
4560                     MPI2_SCSITASKMGMT_RSP_INVALID_FRAME ||
4561                     (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
4562                      MPI2_SCSI_STATE_NO_SCSI_STATUS)))
4563                         scmd->result = DID_SOFT_ERROR << 16;
4564                 else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
4565                         scmd->result = DID_RESET << 16;
4566                 break;
4567
4568         case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
4569         case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
4570         case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
4571                 _scsih_eedp_error_handling(scmd, ioc_status);
4572                 break;
4573         case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
4574         case MPI2_IOCSTATUS_INVALID_FUNCTION:
4575         case MPI2_IOCSTATUS_INVALID_SGL:
4576         case MPI2_IOCSTATUS_INTERNAL_ERROR:
4577         case MPI2_IOCSTATUS_INVALID_FIELD:
4578         case MPI2_IOCSTATUS_INVALID_STATE:
4579         case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
4580         case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
4581         default:
4582                 scmd->result = DID_SOFT_ERROR << 16;
4583                 break;
4584
4585         }
4586
4587 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
4588         if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
4589                 _scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
4590 #endif
4591
4592  out:
4593         scsi_dma_unmap(scmd);
4594         scmd->scsi_done(scmd);
4595         return 1;
4596 }
4597
4598 /**
4599  * _scsih_sas_host_refresh - refreshing sas host object contents
4600  * @ioc: per adapter object
4601  * Context: user
4602  *
4603  * During port enable, fw will send topology events for every device. Its
4604  * possible that the handles may change from the previous setting, so this
4605  * code keeping handles updating if changed.
4606  *
4607  * Return nothing.
4608  */
4609 static void
4610 _scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc)
4611 {
4612         u16 sz;
4613         u16 ioc_status;
4614         int i;
4615         Mpi2ConfigReply_t mpi_reply;
4616         Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
4617         u16 attached_handle;
4618         u8 link_rate;
4619
4620         dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
4621             "updating handles for sas_host(0x%016llx)\n",
4622             ioc->name, (unsigned long long)ioc->sas_hba.sas_address));
4623
4624         sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
4625             * sizeof(Mpi2SasIOUnit0PhyData_t));
4626         sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
4627         if (!sas_iounit_pg0) {
4628                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4629                     ioc->name, __FILE__, __LINE__, __func__);
4630                 return;
4631         }
4632
4633         if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
4634             sas_iounit_pg0, sz)) != 0)
4635                 goto out;
4636         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
4637         if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
4638                 goto out;
4639         for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
4640                 link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4;
4641                 if (i == 0)
4642                         ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
4643                             PhyData[0].ControllerDevHandle);
4644                 ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
4645                 attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
4646                     AttachedDevHandle);
4647                 if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
4648                         link_rate = MPI2_SAS_NEG_LINK_RATE_1_5;
4649                 mpt2sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
4650                     attached_handle, i, link_rate);
4651         }
4652  out:
4653         kfree(sas_iounit_pg0);
4654 }
4655
4656 /**
4657  * _scsih_sas_host_add - create sas host object
4658  * @ioc: per adapter object
4659  *
4660  * Creating host side data object, stored in ioc->sas_hba
4661  *
4662  * Return nothing.
4663  */
4664 static void
4665 _scsih_sas_host_add(struct MPT2SAS_ADAPTER *ioc)
4666 {
4667         int i;
4668         Mpi2ConfigReply_t mpi_reply;
4669         Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
4670         Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
4671         Mpi2SasPhyPage0_t phy_pg0;
4672         Mpi2SasDevicePage0_t sas_device_pg0;
4673         Mpi2SasEnclosurePage0_t enclosure_pg0;
4674         u16 ioc_status;
4675         u16 sz;
4676         u16 device_missing_delay;
4677
4678         mpt2sas_config_get_number_hba_phys(ioc, &ioc->sas_hba.num_phys);
4679         if (!ioc->sas_hba.num_phys) {
4680                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4681                     ioc->name, __FILE__, __LINE__, __func__);
4682                 return;
4683         }
4684
4685         /* sas_iounit page 0 */
4686         sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
4687             sizeof(Mpi2SasIOUnit0PhyData_t));
4688         sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
4689         if (!sas_iounit_pg0) {
4690                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4691                     ioc->name, __FILE__, __LINE__, __func__);
4692                 return;
4693         }
4694         if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
4695             sas_iounit_pg0, sz))) {
4696                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4697                     ioc->name, __FILE__, __LINE__, __func__);
4698                 goto out;
4699         }
4700         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
4701             MPI2_IOCSTATUS_MASK;
4702         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4703                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4704                     ioc->name, __FILE__, __LINE__, __func__);
4705                 goto out;
4706         }
4707
4708         /* sas_iounit page 1 */
4709         sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
4710             sizeof(Mpi2SasIOUnit1PhyData_t));
4711         sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
4712         if (!sas_iounit_pg1) {
4713                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4714                     ioc->name, __FILE__, __LINE__, __func__);
4715                 goto out;
4716         }
4717         if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
4718             sas_iounit_pg1, sz))) {
4719                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4720                     ioc->name, __FILE__, __LINE__, __func__);
4721                 goto out;
4722         }
4723         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
4724             MPI2_IOCSTATUS_MASK;
4725         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4726                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4727                     ioc->name, __FILE__, __LINE__, __func__);
4728                 goto out;
4729         }
4730
4731         ioc->io_missing_delay =
4732             le16_to_cpu(sas_iounit_pg1->IODeviceMissingDelay);
4733         device_missing_delay =
4734             le16_to_cpu(sas_iounit_pg1->ReportDeviceMissingDelay);
4735         if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
4736                 ioc->device_missing_delay = (device_missing_delay &
4737                     MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
4738         else
4739                 ioc->device_missing_delay = device_missing_delay &
4740                     MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
4741
4742         ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev;
4743         ioc->sas_hba.phy = kcalloc(ioc->sas_hba.num_phys,
4744             sizeof(struct _sas_phy), GFP_KERNEL);
4745         if (!ioc->sas_hba.phy) {
4746                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4747                     ioc->name, __FILE__, __LINE__, __func__);
4748                 goto out;
4749         }
4750         for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
4751                 if ((mpt2sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
4752                     i))) {
4753                         printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4754                             ioc->name, __FILE__, __LINE__, __func__);
4755                         goto out;
4756                 }
4757                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
4758                     MPI2_IOCSTATUS_MASK;
4759                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4760                         printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4761                             ioc->name, __FILE__, __LINE__, __func__);
4762                         goto out;
4763                 }
4764
4765                 if (i == 0)
4766                         ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
4767                             PhyData[0].ControllerDevHandle);
4768                 ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
4769                 ioc->sas_hba.phy[i].phy_id = i;
4770                 mpt2sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i],
4771                     phy_pg0, ioc->sas_hba.parent_dev);
4772         }
4773         if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
4774             MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) {
4775                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4776                     ioc->name, __FILE__, __LINE__, __func__);
4777                 goto out;
4778         }
4779         ioc->sas_hba.enclosure_handle =
4780             le16_to_cpu(sas_device_pg0.EnclosureHandle);
4781         ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
4782         printk(MPT2SAS_INFO_FMT "host_add: handle(0x%04x), "
4783             "sas_addr(0x%016llx), phys(%d)\n", ioc->name, ioc->sas_hba.handle,
4784             (unsigned long long) ioc->sas_hba.sas_address,
4785             ioc->sas_hba.num_phys) ;
4786
4787         if (ioc->sas_hba.enclosure_handle) {
4788                 if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply,
4789                     &enclosure_pg0,
4790                    MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
4791                    ioc->sas_hba.enclosure_handle))) {
4792                         ioc->sas_hba.enclosure_logical_id =
4793                             le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
4794                 }
4795         }
4796
4797  out:
4798         kfree(sas_iounit_pg1);
4799         kfree(sas_iounit_pg0);
4800 }
4801
4802 /**
4803  * _scsih_expander_add -  creating expander object
4804  * @ioc: per adapter object
4805  * @handle: expander handle
4806  *
4807  * Creating expander object, stored in ioc->sas_expander_list.
4808  *
4809  * Return 0 for success, else error.
4810  */
4811 static int
4812 _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
4813 {
4814         struct _sas_node *sas_expander;
4815         Mpi2ConfigReply_t mpi_reply;
4816         Mpi2ExpanderPage0_t expander_pg0;
4817         Mpi2ExpanderPage1_t expander_pg1;
4818         Mpi2SasEnclosurePage0_t enclosure_pg0;
4819         u32 ioc_status;
4820         u16 parent_handle;
4821         u64 sas_address, sas_address_parent = 0;
4822         int i;
4823         unsigned long flags;
4824         struct _sas_port *mpt2sas_port = NULL;
4825         int rc = 0;
4826
4827         if (!handle)
4828                 return -1;
4829
4830         if (ioc->shost_recovery || ioc->pci_error_recovery)
4831                 return -1;
4832
4833         if ((mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
4834             MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) {
4835                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4836                     ioc->name, __FILE__, __LINE__, __func__);
4837                 return -1;
4838         }
4839
4840         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
4841             MPI2_IOCSTATUS_MASK;
4842         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4843                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4844                     ioc->name, __FILE__, __LINE__, __func__);
4845                 return -1;
4846         }
4847
4848         /* handle out of order topology events */
4849         parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle);
4850         if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent)
4851             != 0) {
4852                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4853                     ioc->name, __FILE__, __LINE__, __func__);
4854                 return -1;
4855         }
4856         if (sas_address_parent != ioc->sas_hba.sas_address) {
4857                 spin_lock_irqsave(&ioc->sas_node_lock, flags);
4858                 sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
4859                     sas_address_parent);
4860                 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
4861                 if (!sas_expander) {
4862                         rc = _scsih_expander_add(ioc, parent_handle);
4863                         if (rc != 0)
4864                                 return rc;
4865                 }
4866         }
4867
4868         spin_lock_irqsave(&ioc->sas_node_lock, flags);
4869         sas_address = le64_to_cpu(expander_pg0.SASAddress);
4870         sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
4871             sas_address);
4872         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
4873
4874         if (sas_expander)
4875                 return 0;
4876
4877         sas_expander = kzalloc(sizeof(struct _sas_node),
4878             GFP_KERNEL);
4879         if (!sas_expander) {
4880                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4881                     ioc->name, __FILE__, __LINE__, __func__);
4882                 return -1;
4883         }
4884
4885         sas_expander->handle = handle;
4886         sas_expander->num_phys = expander_pg0.NumPhys;
4887         sas_expander->sas_address_parent = sas_address_parent;
4888         sas_expander->sas_address = sas_address;
4889
4890         printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x),"
4891             " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name,
4892             handle, parent_handle, (unsigned long long)
4893             sas_expander->sas_address, sas_expander->num_phys);
4894
4895         if (!sas_expander->num_phys)
4896                 goto out_fail;
4897         sas_expander->phy = kcalloc(sas_expander->num_phys,
4898             sizeof(struct _sas_phy), GFP_KERNEL);
4899         if (!sas_expander->phy) {
4900                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4901                     ioc->name, __FILE__, __LINE__, __func__);
4902                 rc = -1;
4903                 goto out_fail;
4904         }
4905
4906         INIT_LIST_HEAD(&sas_expander->sas_port_list);
4907         mpt2sas_port = mpt2sas_transport_port_add(ioc, handle,
4908             sas_address_parent);
4909         if (!mpt2sas_port) {
4910                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4911                     ioc->name, __FILE__, __LINE__, __func__);
4912                 rc = -1;
4913                 goto out_fail;
4914         }
4915         sas_expander->parent_dev = &mpt2sas_port->rphy->dev;
4916
4917         for (i = 0 ; i < sas_expander->num_phys ; i++) {
4918                 if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply,
4919                     &expander_pg1, i, handle))) {
4920                         printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4921                             ioc->name, __FILE__, __LINE__, __func__);
4922                         rc = -1;
4923                         goto out_fail;
4924                 }
4925                 sas_expander->phy[i].handle = handle;
4926                 sas_expander->phy[i].phy_id = i;
4927
4928                 if ((mpt2sas_transport_add_expander_phy(ioc,
4929                     &sas_expander->phy[i], expander_pg1,
4930                     sas_expander->parent_dev))) {
4931                         printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
4932                             ioc->name, __FILE__, __LINE__, __func__);
4933                         rc = -1;
4934                         goto out_fail;
4935                 }
4936         }
4937
4938         if (sas_expander->enclosure_handle) {
4939                 if (!(mpt2sas_config_get_enclosure_pg0(ioc, &mpi_reply,
4940                     &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
4941                    sas_expander->enclosure_handle))) {
4942                         sas_expander->enclosure_logical_id =
4943                             le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
4944                 }
4945         }
4946
4947         _scsih_expander_node_add(ioc, sas_expander);
4948          return 0;
4949
4950  out_fail:
4951
4952         if (mpt2sas_port)
4953                 mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
4954                     sas_address_parent);
4955         kfree(sas_expander);
4956         return rc;
4957 }
4958
4959 /**
4960  * _scsih_done -  scsih callback handler.
4961  * @ioc: per adapter object
4962  * @smid: system request message index
4963  * @msix_index: MSIX table index supplied by the OS
4964  * @reply: reply message frame(lower 32bit addr)
4965  *
4966  * Callback handler when sending internal generated message frames.
4967  * The callback index passed is `ioc->scsih_cb_idx`
4968  *
4969  * Return 1 meaning mf should be freed from _base_interrupt
4970  *        0 means the mf is freed from this function.
4971  */
4972 static u8
4973 _scsih_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
4974 {
4975         MPI2DefaultReply_t *mpi_reply;
4976
4977         mpi_reply =  mpt2sas_base_get_reply_virt_addr(ioc, reply);
4978         if (ioc->scsih_cmds.status == MPT2_CMD_NOT_USED)
4979                 return 1;
4980         if (ioc->scsih_cmds.smid != smid)
4981                 return 1;
4982         ioc->scsih_cmds.status |= MPT2_CMD_COMPLETE;
4983         if (mpi_reply) {
4984                 memcpy(ioc->scsih_cmds.reply, mpi_reply,
4985                     mpi_reply->MsgLength*4);
4986                 ioc->scsih_cmds.status |= MPT2_CMD_REPLY_VALID;
4987         }
4988         ioc->scsih_cmds.status &= ~MPT2_CMD_PENDING;
4989         complete(&ioc->scsih_cmds.done);
4990         return 1;
4991 }
4992
4993 /**
4994  * mpt2sas_expander_remove - removing expander object
4995  * @ioc: per adapter object
4996  * @sas_address: expander sas_address
4997  *
4998  * Return nothing.
4999  */
5000 void
5001 mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
5002 {
5003         struct _sas_node *sas_expander;
5004         unsigned long flags;
5005
5006         if (ioc->shost_recovery)
5007                 return;
5008
5009         spin_lock_irqsave(&ioc->sas_node_lock, flags);
5010         sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
5011             sas_address);
5012         if (sas_expander)
5013                 list_del(&sas_expander->list);
5014         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
5015         if (sas_expander)
5016                 _scsih_expander_node_remove(ioc, sas_expander);
5017 }
5018
5019 /**
5020  * _scsih_check_access_status - check access flags
5021  * @ioc: per adapter object
5022  * @sas_address: sas address
5023  * @handle: sas device handle
5024  * @access_flags: errors returned during discovery of the device
5025  *
5026  * Return 0 for success, else failure
5027  */
5028 static u8
5029 _scsih_check_access_status(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
5030    u16 handle, u8 access_status)
5031 {
5032         u8 rc = 1;
5033         char *desc = NULL;
5034
5035         switch (access_status) {
5036         case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS:
5037         case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION:
5038                 rc = 0;
5039                 break;
5040         case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED:
5041                 desc = "sata capability failed";
5042                 break;
5043         case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT:
5044                 desc = "sata affiliation conflict";
5045                 break;
5046         case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE:
5047                 desc = "route not addressable";
5048                 break;
5049         case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE:
5050                 desc = "smp error not addressable";
5051                 break;
5052         case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED:
5053                 desc = "device blocked";
5054                 break;
5055         case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED:
5056         case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN:
5057         case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT:
5058         case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG:
5059         case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION:
5060         case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER:
5061         case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN:
5062         case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN:
5063         case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN:
5064         case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION:
5065         case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE:
5066         case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX:
5067                 desc = "sata initialization failed";
5068                 break;
5069         default:
5070                 desc = "unknown";
5071                 break;
5072         }
5073
5074         if (!rc)
5075                 return 0;
5076
5077         printk(MPT2SAS_ERR_FMT "discovery errors(%s): sas_address(0x%016llx), "
5078             "handle(0x%04x)\n", ioc->name, desc,
5079             (unsigned long long)sas_address, handle);
5080         return rc;
5081 }
5082
5083 static void
5084 _scsih_check_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
5085 {
5086         Mpi2ConfigReply_t mpi_reply;
5087         Mpi2SasDevicePage0_t sas_device_pg0;
5088         struct _sas_device *sas_device;
5089         u32 ioc_status;
5090         unsigned long flags;
5091         u64 sas_address;
5092         struct scsi_target *starget;
5093         struct MPT2SAS_TARGET *sas_target_priv_data;
5094         u32 device_info;
5095
5096
5097         if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
5098             MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)))
5099                 return;
5100
5101         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
5102         if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
5103                 return;
5104
5105         /* check if this is end device */
5106         device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
5107         if (!(_scsih_is_end_device(device_info)))
5108                 return;
5109
5110         spin_lock_irqsave(&ioc->sas_device_lock, flags);
5111         sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
5112         sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
5113             sas_address);
5114
5115         if (!sas_device) {
5116                 printk(MPT2SAS_ERR_FMT "device is not present "
5117                     "handle(0x%04x), no sas_device!!!\n", ioc->name, handle);
5118                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5119                 return;
5120         }
5121
5122         if (unlikely(sas_device->handle != handle)) {
5123                 starget = sas_device->starget;
5124                 sas_target_priv_data = starget->hostdata;
5125                 starget_printk(KERN_INFO, starget, "handle changed from(0x%04x)"
5126                    " to (0x%04x)!!!\n", sas_device->handle, handle);
5127                 sas_target_priv_data->handle = handle;
5128                 sas_device->handle = handle;
5129         }
5130
5131         /* check if device is present */
5132         if (!(le16_to_cpu(sas_device_pg0.Flags) &
5133             MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
5134                 printk(MPT2SAS_ERR_FMT "device is not present "
5135                     "handle(0x%04x), flags!!!\n", ioc->name, handle);
5136                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5137                 return;
5138         }
5139
5140         /* check if there were any issues with discovery */
5141         if (_scsih_check_access_status(ioc, sas_address, handle,
5142             sas_device_pg0.AccessStatus)) {
5143                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5144                 return;
5145         }
5146         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5147         _scsih_ublock_io_device(ioc, sas_address);
5148
5149 }
5150
5151 /**
5152  * _scsih_add_device -  creating sas device object
5153  * @ioc: per adapter object
5154  * @handle: sas device handle
5155  * @phy_num: phy number end device attached to
5156  * @is_pd: is this hidden raid component
5157  *
5158  * Creating end device object, stored in ioc->sas_device_list.
5159  *
5160  * Returns 0 for success, non-zero for failure.
5161  */
5162 static int
5163 _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd)
5164 {
5165         Mpi2ConfigReply_t mpi_reply;
5166         Mpi2SasDevicePage0_t sas_device_pg0;
5167         Mpi2SasEnclosurePage0_t enclosure_pg0;
5168         struct _sas_device *sas_device;
5169         u32 ioc_status;
5170         __le64 sas_address;
5171         u32 device_info;
5172         unsigned long flags;
5173
5174         if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
5175             MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
5176                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
5177                     ioc->name, __FILE__, __LINE__, __func__);
5178                 return -1;
5179         }
5180
5181         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
5182             MPI2_IOCSTATUS_MASK;
5183         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
5184                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
5185                     ioc->name, __FILE__, __LINE__, __func__);
5186                 return -1;
5187         }
5188
5189         sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
5190
5191         /* check if device is present */
5192         if (!(le16_to_cpu(sas_device_pg0.Flags) &
5193             MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
5194                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
5195                     ioc->name, __FILE__, __LINE__, __func__);
5196                 printk(MPT2SAS_ERR_FMT "Flags = 0x%04x\n",
5197                     ioc->name, le16_to_cpu(sas_device_pg0.Flags));
5198                 return -1;
5199         }
5200
5201         /* check if there were any issues with discovery */
5202         if (_scsih_check_access_status(ioc, sas_address, handle,
5203             sas_device_pg0.AccessStatus))
5204                 return -1;
5205
5206         /* check if this is end device */
5207         device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
5208         if (!(_scsih_is_end_device(device_info))) {
5209                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
5210                     ioc->name, __FILE__, __LINE__, __func__);
5211                 return -1;
5212         }
5213
5214
5215         spin_lock_irqsave(&ioc->sas_device_lock, flags);
5216         sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
5217             sas_address);
5218         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5219
5220         if (sas_device)
5221                 return 0;
5222
5223         sas_device = kzalloc(sizeof(struct _sas_device),
5224             GFP_KERNEL);
5225         if (!sas_device) {
5226                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
5227                     ioc->name, __FILE__, __LINE__, __func__);
5228                 return -1;
5229         }
5230
5231         sas_device->handle = handle;
5232         if (_scsih_get_sas_address(ioc, le16_to_cpu
5233                 (sas_device_pg0.ParentDevHandle),
5234                 &sas_device->sas_address_parent) != 0)
5235                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
5236                     ioc->name, __FILE__, __LINE__, __func__);
5237         sas_device->enclosure_handle =
5238             le16_to_cpu(sas_device_pg0.EnclosureHandle);
5239         sas_device->slot =
5240             le16_to_cpu(sas_device_pg0.Slot);
5241         sas_device->device_info = device_info;
5242         sas_device->sas_address = sas_address;
5243         sas_device->phy = sas_device_pg0.PhyNum;
5244
5245         /* get enclosure_logical_id */
5246         if (sas_device->enclosure_handle && !(mpt2sas_config_get_enclosure_pg0(
5247            ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
5248            sas_device->enclosure_handle)))
5249                 sas_device->enclosure_logical_id =
5250                     le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
5251
5252         /* get device name */
5253         sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
5254
5255         if (ioc->wait_for_discovery_to_complete)
5256                 _scsih_sas_device_init_add(ioc, sas_device);
5257         else
5258                 _scsih_sas_device_add(ioc, sas_device);
5259
5260         return 0;
5261 }
5262
5263 /**
5264  * _scsih_remove_device -  removing sas device object
5265  * @ioc: per adapter object
5266  * @sas_device_delete: the sas_device object
5267  *
5268  * Return nothing.
5269  */
5270 static void
5271 _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc,
5272     struct _sas_device *sas_device)
5273 {
5274         struct MPT2SAS_TARGET *sas_target_priv_data;
5275
5276         if ((ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) &&
5277                 (sas_device->pfa_led_on)) {
5278                 _scsih_turn_off_pfa_led(ioc, sas_device);
5279                 sas_device->pfa_led_on = 0;
5280         }
5281
5282         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: "
5283             "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
5284                 sas_device->handle, (unsigned long long)
5285             sas_device->sas_address));
5286
5287         if (sas_device->starget && sas_device->starget->hostdata) {
5288                 sas_target_priv_data = sas_device->starget->hostdata;
5289                 sas_target_priv_data->deleted = 1;
5290                 _scsih_ublock_io_device(ioc, sas_device->sas_address);
5291                 sas_target_priv_data->handle =
5292                      MPT2SAS_INVALID_DEVICE_HANDLE;
5293         }
5294
5295         if (!ioc->hide_drives)
5296                 mpt2sas_transport_port_remove(ioc,
5297                     sas_device->sas_address,
5298                     sas_device->sas_address_parent);
5299
5300         printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr"
5301             "(0x%016llx)\n", ioc->name, sas_device->handle,
5302             (unsigned long long) sas_device->sas_address);
5303
5304         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: "
5305             "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
5306             sas_device->handle, (unsigned long long)
5307             sas_device->sas_address));
5308         kfree(sas_device);
5309 }
5310 /**
5311  * _scsih_device_remove_by_handle - removing device object by handle
5312  * @ioc: per adapter object
5313  * @handle: device handle
5314  *
5315  * Return nothing.
5316  */
5317 static void
5318 _scsih_device_remove_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
5319 {
5320         struct _sas_device *sas_device;
5321         unsigned long flags;
5322
5323         if (ioc->shost_recovery)
5324                 return;
5325
5326         spin_lock_irqsave(&ioc->sas_device_lock, flags);
5327         sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
5328         if (sas_device)
5329                 list_del(&sas_device->list);
5330         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5331         if (sas_device)
5332                 _scsih_remove_device(ioc, sas_device);
5333 }
5334
5335 /**
5336  * mpt2sas_device_remove_by_sas_address - removing device object by sas address
5337  * @ioc: per adapter object
5338  * @sas_address: device sas_address
5339  *
5340  * Return nothing.
5341  */
5342 void
5343 mpt2sas_device_remove_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
5344         u64 sas_address)
5345 {
5346         struct _sas_device *sas_device;
5347         unsigned long flags;
5348
5349         if (ioc->shost_recovery)
5350                 return;
5351
5352         spin_lock_irqsave(&ioc->sas_device_lock, flags);
5353         sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
5354             sas_address);
5355         if (sas_device)
5356                 list_del(&sas_device->list);
5357         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5358         if (sas_device)
5359                 _scsih_remove_device(ioc, sas_device);
5360 }
5361 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5362 /**
5363  * _scsih_sas_topology_change_event_debug - debug for topology event
5364  * @ioc: per adapter object
5365  * @event_data: event data payload
5366  * Context: user.
5367  */
5368 static void
5369 _scsih_sas_topology_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
5370     Mpi2EventDataSasTopologyChangeList_t *event_data)
5371 {
5372         int i;
5373         u16 handle;
5374         u16 reason_code;
5375         u8 phy_number;
5376         char *status_str = NULL;
5377         u8 link_rate, prev_link_rate;
5378
5379         switch (event_data->ExpStatus) {
5380         case MPI2_EVENT_SAS_TOPO_ES_ADDED:
5381                 status_str = "add";
5382                 break;
5383         case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING:
5384                 status_str = "remove";
5385                 break;
5386         case MPI2_EVENT_SAS_TOPO_ES_RESPONDING:
5387         case 0:
5388                 status_str =  "responding";
5389                 break;
5390         case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
5391                 status_str = "remove delay";
5392                 break;
5393         default:
5394                 status_str = "unknown status";
5395                 break;
5396         }
5397         printk(MPT2SAS_INFO_FMT "sas topology change: (%s)\n",
5398             ioc->name, status_str);
5399         printk(KERN_INFO "\thandle(0x%04x), enclosure_handle(0x%04x) "
5400             "start_phy(%02d), count(%d)\n",
5401             le16_to_cpu(event_data->ExpanderDevHandle),
5402             le16_to_cpu(event_data->EnclosureHandle),
5403             event_data->StartPhyNum, event_data->NumEntries);
5404         for (i = 0; i < event_data->NumEntries; i++) {
5405                 handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
5406                 if (!handle)
5407                         continue;
5408                 phy_number = event_data->StartPhyNum + i;
5409                 reason_code = event_data->PHY[i].PhyStatus &
5410                     MPI2_EVENT_SAS_TOPO_RC_MASK;
5411                 switch (reason_code) {
5412                 case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
5413                         status_str = "target add";
5414                         break;
5415                 case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
5416                         status_str = "target remove";
5417                         break;
5418                 case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
5419                         status_str = "delay target remove";
5420                         break;
5421                 case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
5422                         status_str = "link rate change";
5423                         break;
5424                 case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
5425                         status_str = "target responding";
5426                         break;
5427                 default:
5428                         status_str = "unknown";
5429                         break;
5430                 }
5431                 link_rate = event_data->PHY[i].LinkRate >> 4;
5432                 prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
5433                 printk(KERN_INFO "\tphy(%02d), attached_handle(0x%04x): %s:"
5434                     " link rate: new(0x%02x), old(0x%02x)\n", phy_number,
5435                     handle, status_str, link_rate, prev_link_rate);
5436
5437         }
5438 }
5439 #endif
5440
5441 /**
5442  * _scsih_sas_topology_change_event - handle topology changes
5443  * @ioc: per adapter object
5444  * @fw_event: The fw_event_work object
5445  * Context: user.
5446  *
5447  */
5448 static void
5449 _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
5450     struct fw_event_work *fw_event)
5451 {
5452         int i;
5453         u16 parent_handle, handle;
5454         u16 reason_code;
5455         u8 phy_number, max_phys;
5456         struct _sas_node *sas_expander;
5457         u64 sas_address;
5458         unsigned long flags;
5459         u8 link_rate, prev_link_rate;
5460         Mpi2EventDataSasTopologyChangeList_t *event_data =
5461                 (Mpi2EventDataSasTopologyChangeList_t *)
5462                 fw_event->event_data;
5463
5464 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5465         if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
5466                 _scsih_sas_topology_change_event_debug(ioc, event_data);
5467 #endif
5468
5469         if (ioc->remove_host || ioc->pci_error_recovery)
5470                 return;
5471
5472         if (!ioc->sas_hba.num_phys)
5473                 _scsih_sas_host_add(ioc);
5474         else
5475                 _scsih_sas_host_refresh(ioc);
5476
5477         if (fw_event->ignore) {
5478                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring expander "
5479                     "event\n", ioc->name));
5480                 return;
5481         }
5482
5483         parent_handle = le16_to_cpu(event_data->ExpanderDevHandle);
5484
5485         /* handle expander add */
5486         if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED)
5487                 if (_scsih_expander_add(ioc, parent_handle) != 0)
5488                         return;
5489
5490         spin_lock_irqsave(&ioc->sas_node_lock, flags);
5491         sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
5492             parent_handle);
5493         if (sas_expander) {
5494                 sas_address = sas_expander->sas_address;
5495                 max_phys = sas_expander->num_phys;
5496         } else if (parent_handle < ioc->sas_hba.num_phys) {
5497                 sas_address = ioc->sas_hba.sas_address;
5498                 max_phys = ioc->sas_hba.num_phys;
5499         } else {
5500         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
5501                 return;
5502         }
5503         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
5504
5505         /* handle siblings events */
5506         for (i = 0; i < event_data->NumEntries; i++) {
5507                 if (fw_event->ignore) {
5508                         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring "
5509                             "expander event\n", ioc->name));
5510                         return;
5511                 }
5512                 if (ioc->shost_recovery || ioc->remove_host ||
5513                     ioc->pci_error_recovery)
5514                         return;
5515                 phy_number = event_data->StartPhyNum + i;
5516                 if (phy_number >= max_phys)
5517                         continue;
5518                 reason_code = event_data->PHY[i].PhyStatus &
5519                     MPI2_EVENT_SAS_TOPO_RC_MASK;
5520                 if ((event_data->PHY[i].PhyStatus &
5521                     MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code !=
5522                     MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
5523                         continue;
5524                 handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
5525                 if (!handle)
5526                         continue;
5527                 link_rate = event_data->PHY[i].LinkRate >> 4;
5528                 prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
5529                 switch (reason_code) {
5530                 case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
5531
5532                         if (ioc->shost_recovery)
5533                                 break;
5534
5535                         if (link_rate == prev_link_rate)
5536                                 break;
5537
5538                         mpt2sas_transport_update_links(ioc, sas_address,
5539                             handle, phy_number, link_rate);
5540
5541                         if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
5542                                 break;
5543
5544                         _scsih_check_device(ioc, handle);
5545                         break;
5546                 case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
5547
5548                         if (ioc->shost_recovery)
5549                                 break;
5550
5551                         mpt2sas_transport_update_links(ioc, sas_address,
5552                             handle, phy_number, link_rate);
5553
5554                         _scsih_add_device(ioc, handle, phy_number, 0);
5555                         break;
5556                 case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
5557
5558                         _scsih_device_remove_by_handle(ioc, handle);
5559                         break;
5560                 }
5561         }
5562
5563         /* handle expander removal */
5564         if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING &&
5565             sas_expander)
5566                 mpt2sas_expander_remove(ioc, sas_address);
5567
5568 }
5569
5570 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5571 /**
5572  * _scsih_sas_device_status_change_event_debug - debug for device event
5573  * @event_data: event data payload
5574  * Context: user.
5575  *
5576  * Return nothing.
5577  */
5578 static void
5579 _scsih_sas_device_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
5580     Mpi2EventDataSasDeviceStatusChange_t *event_data)
5581 {
5582         char *reason_str = NULL;
5583
5584         switch (event_data->ReasonCode) {
5585         case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
5586                 reason_str = "smart data";
5587                 break;
5588         case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
5589                 reason_str = "unsupported device discovered";
5590                 break;
5591         case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
5592                 reason_str = "internal device reset";
5593                 break;
5594         case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
5595                 reason_str = "internal task abort";
5596                 break;
5597         case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
5598                 reason_str = "internal task abort set";
5599                 break;
5600         case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
5601                 reason_str = "internal clear task set";
5602                 break;
5603         case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
5604                 reason_str = "internal query task";
5605                 break;
5606         case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE:
5607                 reason_str = "sata init failure";
5608                 break;
5609         case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
5610                 reason_str = "internal device reset complete";
5611                 break;
5612         case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
5613                 reason_str = "internal task abort complete";
5614                 break;
5615         case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION:
5616                 reason_str = "internal async notification";
5617                 break;
5618         case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY:
5619                 reason_str = "expander reduced functionality";
5620                 break;
5621         case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY:
5622                 reason_str = "expander reduced functionality complete";
5623                 break;
5624         default:
5625                 reason_str = "unknown reason";
5626                 break;
5627         }
5628         printk(MPT2SAS_INFO_FMT "device status change: (%s)\n"
5629             "\thandle(0x%04x), sas address(0x%016llx), tag(%d)",
5630             ioc->name, reason_str, le16_to_cpu(event_data->DevHandle),
5631             (unsigned long long)le64_to_cpu(event_data->SASAddress),
5632             le16_to_cpu(event_data->TaskTag));
5633         if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA)
5634                 printk(MPT2SAS_INFO_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
5635                     event_data->ASC, event_data->ASCQ);
5636         printk(KERN_INFO "\n");
5637 }
5638 #endif
5639
5640 /**
5641  * _scsih_sas_device_status_change_event - handle device status change
5642  * @ioc: per adapter object
5643  * @fw_event: The fw_event_work object
5644  * Context: user.
5645  *
5646  * Return nothing.
5647  */
5648 static void
5649 _scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc,
5650     struct fw_event_work *fw_event)
5651 {
5652         struct MPT2SAS_TARGET *target_priv_data;
5653         struct _sas_device *sas_device;
5654         u64 sas_address;
5655         unsigned long flags;
5656         Mpi2EventDataSasDeviceStatusChange_t *event_data =
5657                 (Mpi2EventDataSasDeviceStatusChange_t *)
5658                 fw_event->event_data;
5659
5660 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5661         if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
5662                 _scsih_sas_device_status_change_event_debug(ioc,
5663                      event_data);
5664 #endif
5665
5666         /* In MPI Revision K (0xC), the internal device reset complete was
5667          * implemented, so avoid setting tm_busy flag for older firmware.
5668          */
5669         if ((ioc->facts.HeaderVersion >> 8) < 0xC)
5670                 return;
5671
5672         if (event_data->ReasonCode !=
5673             MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
5674            event_data->ReasonCode !=
5675             MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET)
5676                 return;
5677
5678         spin_lock_irqsave(&ioc->sas_device_lock, flags);
5679         sas_address = le64_to_cpu(event_data->SASAddress);
5680         sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
5681             sas_address);
5682
5683         if (!sas_device || !sas_device->starget) {
5684                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5685                 return;
5686         }
5687
5688         target_priv_data = sas_device->starget->hostdata;
5689         if (!target_priv_data) {
5690                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5691                 return;
5692         }
5693
5694         if (event_data->ReasonCode ==
5695             MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET)
5696                 target_priv_data->tm_busy = 1;
5697         else
5698                 target_priv_data->tm_busy = 0;
5699         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5700 }
5701
5702 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5703 /**
5704  * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure event
5705  * @ioc: per adapter object
5706  * @event_data: event data payload
5707  * Context: user.
5708  *
5709  * Return nothing.
5710  */
5711 static void
5712 _scsih_sas_enclosure_dev_status_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
5713     Mpi2EventDataSasEnclDevStatusChange_t *event_data)
5714 {
5715         char *reason_str = NULL;
5716
5717         switch (event_data->ReasonCode) {
5718         case MPI2_EVENT_SAS_ENCL_RC_ADDED:
5719                 reason_str = "enclosure add";
5720                 break;
5721         case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING:
5722                 reason_str = "enclosure remove";
5723                 break;
5724         default:
5725                 reason_str = "unknown reason";
5726                 break;
5727         }
5728
5729         printk(MPT2SAS_INFO_FMT "enclosure status change: (%s)\n"
5730             "\thandle(0x%04x), enclosure logical id(0x%016llx)"
5731             " number slots(%d)\n", ioc->name, reason_str,
5732             le16_to_cpu(event_data->EnclosureHandle),
5733             (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID),
5734             le16_to_cpu(event_data->StartSlot));
5735 }
5736 #endif
5737
5738 /**
5739  * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
5740  * @ioc: per adapter object
5741  * @fw_event: The fw_event_work object
5742  * Context: user.
5743  *
5744  * Return nothing.
5745  */
5746 static void
5747 _scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc,
5748     struct fw_event_work *fw_event)
5749 {
5750 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5751         if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
5752                 _scsih_sas_enclosure_dev_status_change_event_debug(ioc,
5753                      (Mpi2EventDataSasEnclDevStatusChange_t *)
5754                      fw_event->event_data);
5755 #endif
5756 }
5757
5758 /**
5759  * _scsih_sas_broadcast_primitive_event - handle broadcast events
5760  * @ioc: per adapter object
5761  * @fw_event: The fw_event_work object
5762  * Context: user.
5763  *
5764  * Return nothing.
5765  */
5766 static void
5767 _scsih_sas_broadcast_primitive_event(struct MPT2SAS_ADAPTER *ioc,
5768     struct fw_event_work *fw_event)
5769 {
5770         struct scsi_cmnd *scmd;
5771         struct scsi_device *sdev;
5772         u16 smid, handle;
5773         u32 lun;
5774         struct MPT2SAS_DEVICE *sas_device_priv_data;
5775         u32 termination_count;
5776         u32 query_count;
5777         Mpi2SCSITaskManagementReply_t *mpi_reply;
5778         Mpi2EventDataSasBroadcastPrimitive_t *event_data =
5779                 (Mpi2EventDataSasBroadcastPrimitive_t *)
5780                 fw_event->event_data;
5781         u16 ioc_status;
5782         unsigned long flags;
5783         int r;
5784         u8 max_retries = 0;
5785         u8 task_abort_retries;
5786
5787         mutex_lock(&ioc->tm_cmds.mutex);
5788         pr_info(MPT2SAS_FMT
5789                 "%s: enter: phy number(%d), width(%d)\n",
5790                 ioc->name, __func__, event_data->PhyNum,
5791                 event_data->PortWidth);
5792
5793         _scsih_block_io_all_device(ioc);
5794
5795         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
5796         mpi_reply = ioc->tm_cmds.reply;
5797 broadcast_aen_retry:
5798
5799         /* sanity checks for retrying this loop */
5800         if (max_retries++ == 5) {
5801                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: giving up\n",
5802                     ioc->name, __func__));
5803                 goto out;
5804         } else if (max_retries > 1)
5805                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: %d retry\n",
5806                     ioc->name, __func__, max_retries - 1));
5807
5808         termination_count = 0;
5809         query_count = 0;
5810         for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
5811                 if (ioc->shost_recovery)
5812                         goto out;
5813                 scmd = _scsih_scsi_lookup_get(ioc, smid);
5814                 if (!scmd)
5815                         continue;
5816                 sdev = scmd->device;
5817                 sas_device_priv_data = sdev->hostdata;
5818                 if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
5819                         continue;
5820                  /* skip hidden raid components */
5821                 if (sas_device_priv_data->sas_target->flags &
5822                     MPT_TARGET_FLAGS_RAID_COMPONENT)
5823                         continue;
5824                  /* skip volumes */
5825                 if (sas_device_priv_data->sas_target->flags &
5826                     MPT_TARGET_FLAGS_VOLUME)
5827                         continue;
5828
5829                 handle = sas_device_priv_data->sas_target->handle;
5830                 lun = sas_device_priv_data->lun;
5831                 query_count++;
5832
5833                 if (ioc->shost_recovery)
5834                         goto out;
5835
5836                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
5837                 r = mpt2sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
5838                     MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30,
5839                     TM_MUTEX_OFF);
5840                 if (r == FAILED) {
5841                         sdev_printk(KERN_WARNING, sdev,
5842                             "mpt2sas_scsih_issue_tm: FAILED when sending "
5843                             "QUERY_TASK: scmd(%p)\n", scmd);
5844                         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
5845                         goto broadcast_aen_retry;
5846                 }
5847                 ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
5848                     & MPI2_IOCSTATUS_MASK;
5849                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
5850                         sdev_printk(KERN_WARNING, sdev, "query task: FAILED "
5851                             "with IOCSTATUS(0x%04x), scmd(%p)\n", ioc_status,
5852                             scmd);
5853                         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
5854                         goto broadcast_aen_retry;
5855                 }
5856
5857                 /* see if IO is still owned by IOC and target */
5858                 if (mpi_reply->ResponseCode ==
5859                      MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
5860                      mpi_reply->ResponseCode ==
5861                      MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC) {
5862                         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
5863                         continue;
5864                 }
5865                 task_abort_retries = 0;
5866  tm_retry:
5867                 if (task_abort_retries++ == 60) {
5868                         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
5869                             "%s: ABORT_TASK: giving up\n", ioc->name,
5870                             __func__));
5871                         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
5872                         goto broadcast_aen_retry;
5873                 }
5874
5875                 if (ioc->shost_recovery)
5876                         goto out_no_lock;
5877
5878                 r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
5879                     sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30,
5880                     TM_MUTEX_OFF);
5881                 if (r == FAILED) {
5882                         sdev_printk(KERN_WARNING, sdev,
5883                             "mpt2sas_scsih_issue_tm: ABORT_TASK: FAILED : "
5884                             "scmd(%p)\n", scmd);
5885                         goto tm_retry;
5886                 }
5887
5888                 if (task_abort_retries > 1)
5889                         sdev_printk(KERN_WARNING, sdev,
5890                             "mpt2sas_scsih_issue_tm: ABORT_TASK: RETRIES (%d):"
5891                             " scmd(%p)\n",
5892                             task_abort_retries - 1, scmd);
5893
5894                 termination_count += le32_to_cpu(mpi_reply->TerminationCount);
5895                 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
5896         }
5897
5898         if (ioc->broadcast_aen_pending) {
5899                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: loop back due to"
5900                      " pending AEN\n", ioc->name, __func__));
5901                  ioc->broadcast_aen_pending = 0;
5902                  goto broadcast_aen_retry;
5903         }
5904
5905  out:
5906         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
5907  out_no_lock:
5908
5909         dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
5910             "%s - exit, query_count = %d termination_count = %d\n",
5911             ioc->name, __func__, query_count, termination_count));
5912
5913         ioc->broadcast_aen_busy = 0;
5914         if (!ioc->shost_recovery)
5915                 _scsih_ublock_io_all_device(ioc);
5916         mutex_unlock(&ioc->tm_cmds.mutex);
5917 }
5918
5919 /**
5920  * _scsih_sas_discovery_event - handle discovery events
5921  * @ioc: per adapter object
5922  * @fw_event: The fw_event_work object
5923  * Context: user.
5924  *
5925  * Return nothing.
5926  */
5927 static void
5928 _scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc,
5929     struct fw_event_work *fw_event)
5930 {
5931         Mpi2EventDataSasDiscovery_t *event_data =
5932                 (Mpi2EventDataSasDiscovery_t *)
5933                 fw_event->event_data;
5934
5935 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
5936         if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
5937                 printk(MPT2SAS_INFO_FMT "discovery event: (%s)", ioc->name,
5938                     (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
5939                     "start" : "stop");
5940         if (event_data->DiscoveryStatus)
5941                 printk("discovery_status(0x%08x)",
5942                     le32_to_cpu(event_data->DiscoveryStatus));
5943         printk("\n");
5944         }
5945 #endif
5946
5947         if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
5948             !ioc->sas_hba.num_phys) {
5949                 if (disable_discovery > 0 && ioc->shost_recovery) {
5950                         /* Wait for the reset to complete */
5951                         while (ioc->shost_recovery)
5952                                 ssleep(1);
5953                 }
5954                 _scsih_sas_host_add(ioc);
5955         }
5956 }
5957
5958 /**
5959  * _scsih_reprobe_lun - reprobing lun
5960  * @sdev: scsi device struct
5961  * @no_uld_attach: sdev->no_uld_attach flag setting
5962  *
5963  **/
5964 static void
5965 _scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
5966 {
5967         int rc;
5968
5969         sdev->no_uld_attach = no_uld_attach ? 1 : 0;
5970         sdev_printk(KERN_INFO, sdev, "%s raid component\n",
5971             sdev->no_uld_attach ? "hidding" : "exposing");
5972         rc = scsi_device_reprobe(sdev);
5973 }
5974
5975 /**
5976  * _scsih_sas_volume_add - add new volume
5977  * @ioc: per adapter object
5978  * @element: IR config element data
5979  * Context: user.
5980  *
5981  * Return nothing.
5982  */
5983 static void
5984 _scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc,
5985     Mpi2EventIrConfigElement_t *element)
5986 {
5987         struct _raid_device *raid_device;
5988         unsigned long flags;
5989         u64 wwid;
5990         u16 handle = le16_to_cpu(element->VolDevHandle);
5991         int rc;
5992
5993         mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
5994         if (!wwid) {
5995                 printk(MPT2SAS_ERR_FMT
5996                     "failure at %s:%d/%s()!\n", ioc->name,
5997                     __FILE__, __LINE__, __func__);
5998                 return;
5999         }
6000
6001         spin_lock_irqsave(&ioc->raid_device_lock, flags);
6002         raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid);
6003         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6004
6005         if (raid_device)
6006                 return;
6007
6008         raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
6009         if (!raid_device) {
6010                 printk(MPT2SAS_ERR_FMT
6011                     "failure at %s:%d/%s()!\n", ioc->name,
6012                     __FILE__, __LINE__, __func__);
6013                 return;
6014         }
6015
6016         raid_device->id = ioc->sas_id++;
6017         raid_device->channel = RAID_CHANNEL;
6018         raid_device->handle = handle;
6019         raid_device->wwid = wwid;
6020         _scsih_raid_device_add(ioc, raid_device);
6021         if (!ioc->wait_for_discovery_to_complete) {
6022                 rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
6023                     raid_device->id, 0);
6024                 if (rc)
6025                         _scsih_raid_device_remove(ioc, raid_device);
6026         } else {
6027                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
6028                 _scsih_determine_boot_device(ioc, raid_device, 1);
6029                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6030         }
6031 }
6032
6033 /**
6034  * _scsih_sas_volume_delete - delete volume
6035  * @ioc: per adapter object
6036  * @handle: volume device handle
6037  * Context: user.
6038  *
6039  * Return nothing.
6040  */
6041 static void
6042 _scsih_sas_volume_delete(struct MPT2SAS_ADAPTER *ioc, u16 handle)
6043 {
6044         struct _raid_device *raid_device;
6045         unsigned long flags;
6046         struct MPT2SAS_TARGET *sas_target_priv_data;
6047         struct scsi_target *starget = NULL;
6048
6049         spin_lock_irqsave(&ioc->raid_device_lock, flags);
6050         raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
6051         if (raid_device) {
6052                 if (raid_device->starget) {
6053                         starget = raid_device->starget;
6054                         sas_target_priv_data = starget->hostdata;
6055                         sas_target_priv_data->deleted = 1;
6056                 }
6057                 printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid"
6058                     "(0x%016llx)\n", ioc->name,  raid_device->handle,
6059                     (unsigned long long) raid_device->wwid);
6060                 list_del(&raid_device->list);
6061                 kfree(raid_device);
6062         }
6063         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6064         if (starget)
6065                 scsi_remove_target(&starget->dev);
6066 }
6067
6068 /**
6069  * _scsih_sas_pd_expose - expose pd component to /dev/sdX
6070  * @ioc: per adapter object
6071  * @element: IR config element data
6072  * Context: user.
6073  *
6074  * Return nothing.
6075  */
6076 static void
6077 _scsih_sas_pd_expose(struct MPT2SAS_ADAPTER *ioc,
6078     Mpi2EventIrConfigElement_t *element)
6079 {
6080         struct _sas_device *sas_device;
6081         struct scsi_target *starget = NULL;
6082         struct MPT2SAS_TARGET *sas_target_priv_data;
6083         unsigned long flags;
6084         u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
6085
6086         spin_lock_irqsave(&ioc->sas_device_lock, flags);
6087         sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
6088         if (sas_device) {
6089                 sas_device->volume_handle = 0;
6090                 sas_device->volume_wwid = 0;
6091                 clear_bit(handle, ioc->pd_handles);
6092                 if (sas_device->starget && sas_device->starget->hostdata) {
6093                         starget = sas_device->starget;
6094                         sas_target_priv_data = starget->hostdata;
6095                         sas_target_priv_data->flags &=
6096                             ~MPT_TARGET_FLAGS_RAID_COMPONENT;
6097                 }
6098         }
6099         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
6100         if (!sas_device)
6101                 return;
6102
6103         /* exposing raid component */
6104         if (starget)
6105                 starget_for_each_device(starget, NULL, _scsih_reprobe_lun);
6106 }
6107
6108 /**
6109  * _scsih_sas_pd_hide - hide pd component from /dev/sdX
6110  * @ioc: per adapter object
6111  * @element: IR config element data
6112  * Context: user.
6113  *
6114  * Return nothing.
6115  */
6116 static void
6117 _scsih_sas_pd_hide(struct MPT2SAS_ADAPTER *ioc,
6118     Mpi2EventIrConfigElement_t *element)
6119 {
6120         struct _sas_device *sas_device;
6121         struct scsi_target *starget = NULL;
6122         struct MPT2SAS_TARGET *sas_target_priv_data;
6123         unsigned long flags;
6124         u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
6125         u16 volume_handle = 0;
6126         u64 volume_wwid = 0;
6127
6128         mpt2sas_config_get_volume_handle(ioc, handle, &volume_handle);
6129         if (volume_handle)
6130                 mpt2sas_config_get_volume_wwid(ioc, volume_handle,
6131                     &volume_wwid);
6132
6133         spin_lock_irqsave(&ioc->sas_device_lock, flags);
6134         sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
6135         if (sas_device) {
6136                 set_bit(handle, ioc->pd_handles);
6137                 if (sas_device->starget && sas_device->starget->hostdata) {
6138                         starget = sas_device->starget;
6139                         sas_target_priv_data = starget->hostdata;
6140                         sas_target_priv_data->flags |=
6141                             MPT_TARGET_FLAGS_RAID_COMPONENT;
6142                         sas_device->volume_handle = volume_handle;
6143                         sas_device->volume_wwid = volume_wwid;
6144                 }
6145         }
6146         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
6147         if (!sas_device)
6148                 return;
6149
6150         /* hiding raid component */
6151         if (starget)
6152                 starget_for_each_device(starget, (void *)1, _scsih_reprobe_lun);
6153 }
6154
6155 /**
6156  * _scsih_sas_pd_delete - delete pd component
6157  * @ioc: per adapter object
6158  * @element: IR config element data
6159  * Context: user.
6160  *
6161  * Return nothing.
6162  */
6163 static void
6164 _scsih_sas_pd_delete(struct MPT2SAS_ADAPTER *ioc,
6165     Mpi2EventIrConfigElement_t *element)
6166 {
6167         u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
6168
6169         _scsih_device_remove_by_handle(ioc, handle);
6170 }
6171
6172 /**
6173  * _scsih_sas_pd_add - remove pd component
6174  * @ioc: per adapter object
6175  * @element: IR config element data
6176  * Context: user.
6177  *
6178  * Return nothing.
6179  */
6180 static void
6181 _scsih_sas_pd_add(struct MPT2SAS_ADAPTER *ioc,
6182     Mpi2EventIrConfigElement_t *element)
6183 {
6184         struct _sas_device *sas_device;
6185         unsigned long flags;
6186         u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
6187         Mpi2ConfigReply_t mpi_reply;
6188         Mpi2SasDevicePage0_t sas_device_pg0;
6189         u32 ioc_status;
6190         u64 sas_address;
6191         u16 parent_handle;
6192
6193         set_bit(handle, ioc->pd_handles);
6194
6195         spin_lock_irqsave(&ioc->sas_device_lock, flags);
6196         sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
6197         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
6198         if (sas_device)
6199                 return;
6200
6201         if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
6202             MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
6203                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
6204                     ioc->name, __FILE__, __LINE__, __func__);
6205                 return;
6206         }
6207
6208         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
6209             MPI2_IOCSTATUS_MASK;
6210         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
6211                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
6212                     ioc->name, __FILE__, __LINE__, __func__);
6213                 return;
6214         }
6215
6216         parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
6217         if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
6218                 mpt2sas_transport_update_links(ioc, sas_address, handle,
6219                     sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
6220
6221         _scsih_add_device(ioc, handle, 0, 1);
6222 }
6223
6224 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
6225 /**
6226  * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
6227  * @ioc: per adapter object
6228  * @event_data: event data payload
6229  * Context: user.
6230  *
6231  * Return nothing.
6232  */
6233 static void
6234 _scsih_sas_ir_config_change_event_debug(struct MPT2SAS_ADAPTER *ioc,
6235     Mpi2EventDataIrConfigChangeList_t *event_data)
6236 {
6237         Mpi2EventIrConfigElement_t *element;
6238         u8 element_type;
6239         int i;
6240         char *reason_str = NULL, *element_str = NULL;
6241
6242         element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
6243
6244         printk(MPT2SAS_INFO_FMT "raid config change: (%s), elements(%d)\n",
6245             ioc->name, (le32_to_cpu(event_data->Flags) &
6246             MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ?
6247             "foreign" : "native", event_data->NumElements);
6248         for (i = 0; i < event_data->NumElements; i++, element++) {
6249                 switch (element->ReasonCode) {
6250                 case MPI2_EVENT_IR_CHANGE_RC_ADDED:
6251                         reason_str = "add";
6252                         break;
6253                 case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
6254                         reason_str = "remove";
6255                         break;
6256                 case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE:
6257                         reason_str = "no change";
6258                         break;
6259                 case MPI2_EVENT_IR_CHANGE_RC_HIDE:
6260                         reason_str = "hide";
6261                         break;
6262                 case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
6263                         reason_str = "unhide";
6264                         break;
6265                 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
6266                         reason_str = "volume_created";
6267                         break;
6268                 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
6269                         reason_str = "volume_deleted";
6270                         break;
6271                 case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
6272                         reason_str = "pd_created";
6273                         break;
6274                 case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
6275                         reason_str = "pd_deleted";
6276                         break;
6277                 default:
6278                         reason_str = "unknown reason";
6279                         break;
6280                 }
6281                 element_type = le16_to_cpu(element->ElementFlags) &
6282                     MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK;
6283                 switch (element_type) {
6284                 case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT:
6285                         element_str = "volume";
6286                         break;
6287                 case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT:
6288                         element_str = "phys disk";
6289                         break;
6290                 case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT:
6291                         element_str = "hot spare";
6292                         break;
6293                 default:
6294                         element_str = "unknown element";
6295                         break;
6296                 }
6297                 printk(KERN_INFO "\t(%s:%s), vol handle(0x%04x), "
6298                     "pd handle(0x%04x), pd num(0x%02x)\n", element_str,
6299                     reason_str, le16_to_cpu(element->VolDevHandle),
6300                     le16_to_cpu(element->PhysDiskDevHandle),
6301                     element->PhysDiskNum);
6302         }
6303 }
6304 #endif
6305
6306 /**
6307  * _scsih_sas_ir_config_change_event - handle ir configuration change events
6308  * @ioc: per adapter object
6309  * @fw_event: The fw_event_work object
6310  * Context: user.
6311  *
6312  * Return nothing.
6313  */
6314 static void
6315 _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc,
6316     struct fw_event_work *fw_event)
6317 {
6318         Mpi2EventIrConfigElement_t *element;
6319         int i;
6320         u8 foreign_config;
6321         Mpi2EventDataIrConfigChangeList_t *event_data =
6322                 (Mpi2EventDataIrConfigChangeList_t *)
6323                 fw_event->event_data;
6324
6325 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
6326         if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
6327             && !ioc->hide_ir_msg)
6328                 _scsih_sas_ir_config_change_event_debug(ioc, event_data);
6329
6330 #endif
6331
6332         if (ioc->shost_recovery)
6333                 return;
6334
6335         foreign_config = (le32_to_cpu(event_data->Flags) &
6336             MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
6337
6338         element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
6339         for (i = 0; i < event_data->NumElements; i++, element++) {
6340
6341                 switch (element->ReasonCode) {
6342                 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
6343                 case MPI2_EVENT_IR_CHANGE_RC_ADDED:
6344                         if (!foreign_config)
6345                                 _scsih_sas_volume_add(ioc, element);
6346                         break;
6347                 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
6348                 case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
6349                         if (!foreign_config)
6350                                 _scsih_sas_volume_delete(ioc,
6351                                     le16_to_cpu(element->VolDevHandle));
6352                         break;
6353                 case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
6354                         if (!ioc->is_warpdrive)
6355                                 _scsih_sas_pd_hide(ioc, element);
6356                         break;
6357                 case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
6358                         if (!ioc->is_warpdrive)
6359                                 _scsih_sas_pd_expose(ioc, element);
6360                         break;
6361                 case MPI2_EVENT_IR_CHANGE_RC_HIDE:
6362                         if (!ioc->is_warpdrive)
6363                                 _scsih_sas_pd_add(ioc, element);
6364                         break;
6365                 case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
6366                         if (!ioc->is_warpdrive)
6367                                 _scsih_sas_pd_delete(ioc, element);
6368                         break;
6369                 }
6370         }
6371 }
6372
6373 /**
6374  * _scsih_sas_ir_volume_event - IR volume event
6375  * @ioc: per adapter object
6376  * @fw_event: The fw_event_work object
6377  * Context: user.
6378  *
6379  * Return nothing.
6380  */
6381 static void
6382 _scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc,
6383     struct fw_event_work *fw_event)
6384 {
6385         u64 wwid;
6386         unsigned long flags;
6387         struct _raid_device *raid_device;
6388         u16 handle;
6389         u32 state;
6390         int rc;
6391         Mpi2EventDataIrVolume_t *event_data =
6392                 (Mpi2EventDataIrVolume_t *)
6393                 fw_event->event_data;
6394
6395         if (ioc->shost_recovery)
6396                 return;
6397
6398         if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
6399                 return;
6400
6401         handle = le16_to_cpu(event_data->VolDevHandle);
6402         state = le32_to_cpu(event_data->NewValue);
6403         if (!ioc->hide_ir_msg)
6404                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
6405                     "old(0x%08x), new(0x%08x)\n", ioc->name, __func__,  handle,
6406                     le32_to_cpu(event_data->PreviousValue), state));
6407
6408         switch (state) {
6409         case MPI2_RAID_VOL_STATE_MISSING:
6410         case MPI2_RAID_VOL_STATE_FAILED:
6411                 _scsih_sas_volume_delete(ioc, handle);
6412                 break;
6413
6414         case MPI2_RAID_VOL_STATE_ONLINE:
6415         case MPI2_RAID_VOL_STATE_DEGRADED:
6416         case MPI2_RAID_VOL_STATE_OPTIMAL:
6417
6418                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
6419                 raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
6420                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6421
6422                 if (raid_device)
6423                         break;
6424
6425                 mpt2sas_config_get_volume_wwid(ioc, handle, &wwid);
6426                 if (!wwid) {
6427                         printk(MPT2SAS_ERR_FMT
6428                             "failure at %s:%d/%s()!\n", ioc->name,
6429                             __FILE__, __LINE__, __func__);
6430                         break;
6431                 }
6432
6433                 raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
6434                 if (!raid_device) {
6435                         printk(MPT2SAS_ERR_FMT
6436                             "failure at %s:%d/%s()!\n", ioc->name,
6437                             __FILE__, __LINE__, __func__);
6438                         break;
6439                 }
6440
6441                 raid_device->id = ioc->sas_id++;
6442                 raid_device->channel = RAID_CHANNEL;
6443                 raid_device->handle = handle;
6444                 raid_device->wwid = wwid;
6445                 _scsih_raid_device_add(ioc, raid_device);
6446                 rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
6447                     raid_device->id, 0);
6448                 if (rc)
6449                         _scsih_raid_device_remove(ioc, raid_device);
6450                 break;
6451
6452         case MPI2_RAID_VOL_STATE_INITIALIZING:
6453         default:
6454                 break;
6455         }
6456 }
6457
6458 /**
6459  * _scsih_sas_ir_physical_disk_event - PD event
6460  * @ioc: per adapter object
6461  * @fw_event: The fw_event_work object
6462  * Context: user.
6463  *
6464  * Return nothing.
6465  */
6466 static void
6467 _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
6468     struct fw_event_work *fw_event)
6469 {
6470         u16 handle, parent_handle;
6471         u32 state;
6472         struct _sas_device *sas_device;
6473         unsigned long flags;
6474         Mpi2ConfigReply_t mpi_reply;
6475         Mpi2SasDevicePage0_t sas_device_pg0;
6476         u32 ioc_status;
6477         Mpi2EventDataIrPhysicalDisk_t *event_data =
6478                 (Mpi2EventDataIrPhysicalDisk_t *)
6479                 fw_event->event_data;
6480         u64 sas_address;
6481
6482         if (ioc->shost_recovery)
6483                 return;
6484
6485         if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
6486                 return;
6487
6488         handle = le16_to_cpu(event_data->PhysDiskDevHandle);
6489         state = le32_to_cpu(event_data->NewValue);
6490
6491         if (!ioc->hide_ir_msg)
6492                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), "
6493                     "old(0x%08x), new(0x%08x)\n", ioc->name, __func__,  handle,
6494                     le32_to_cpu(event_data->PreviousValue), state));
6495
6496         switch (state) {
6497         case MPI2_RAID_PD_STATE_ONLINE:
6498         case MPI2_RAID_PD_STATE_DEGRADED:
6499         case MPI2_RAID_PD_STATE_REBUILDING:
6500         case MPI2_RAID_PD_STATE_OPTIMAL:
6501         case MPI2_RAID_PD_STATE_HOT_SPARE:
6502
6503                 if (!ioc->is_warpdrive)
6504                         set_bit(handle, ioc->pd_handles);
6505
6506                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
6507                 sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
6508                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
6509
6510                 if (sas_device)
6511                         return;
6512
6513                 if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
6514                     &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
6515                     handle))) {
6516                         printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
6517                             ioc->name, __FILE__, __LINE__, __func__);
6518                         return;
6519                 }
6520
6521                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
6522                     MPI2_IOCSTATUS_MASK;
6523                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
6524                         printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
6525                             ioc->name, __FILE__, __LINE__, __func__);
6526                         return;
6527                 }
6528
6529                 parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
6530                 if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
6531                         mpt2sas_transport_update_links(ioc, sas_address, handle,
6532                             sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
6533
6534                 _scsih_add_device(ioc, handle, 0, 1);
6535
6536                 break;
6537
6538         case MPI2_RAID_PD_STATE_OFFLINE:
6539         case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
6540         case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
6541         default:
6542                 break;
6543         }
6544 }
6545
6546 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
6547 /**
6548  * _scsih_sas_ir_operation_status_event_debug - debug for IR op event
6549  * @ioc: per adapter object
6550  * @event_data: event data payload
6551  * Context: user.
6552  *
6553  * Return nothing.
6554  */
6555 static void
6556 _scsih_sas_ir_operation_status_event_debug(struct MPT2SAS_ADAPTER *ioc,
6557     Mpi2EventDataIrOperationStatus_t *event_data)
6558 {
6559         char *reason_str = NULL;
6560
6561         switch (event_data->RAIDOperation) {
6562         case MPI2_EVENT_IR_RAIDOP_RESYNC:
6563                 reason_str = "resync";
6564                 break;
6565         case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION:
6566                 reason_str = "online capacity expansion";
6567                 break;
6568         case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK:
6569                 reason_str = "consistency check";
6570                 break;
6571         case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT:
6572                 reason_str = "background init";
6573                 break;
6574         case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT:
6575                 reason_str = "make data consistent";
6576                 break;
6577         }
6578
6579         if (!reason_str)
6580                 return;
6581
6582         printk(MPT2SAS_INFO_FMT "raid operational status: (%s)"
6583             "\thandle(0x%04x), percent complete(%d)\n",
6584             ioc->name, reason_str,
6585             le16_to_cpu(event_data->VolDevHandle),
6586             event_data->PercentComplete);
6587 }
6588 #endif
6589
6590 /**
6591  * _scsih_sas_ir_operation_status_event - handle RAID operation events
6592  * @ioc: per adapter object
6593  * @fw_event: The fw_event_work object
6594  * Context: user.
6595  *
6596  * Return nothing.
6597  */
6598 static void
6599 _scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc,
6600     struct fw_event_work *fw_event)
6601 {
6602         Mpi2EventDataIrOperationStatus_t *event_data =
6603                 (Mpi2EventDataIrOperationStatus_t *)
6604                 fw_event->event_data;
6605         static struct _raid_device *raid_device;
6606         unsigned long flags;
6607         u16 handle;
6608
6609 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
6610         if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
6611             && !ioc->hide_ir_msg)
6612                 _scsih_sas_ir_operation_status_event_debug(ioc,
6613                      event_data);
6614 #endif
6615
6616         /* code added for raid transport support */
6617         if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
6618
6619                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
6620                 handle = le16_to_cpu(event_data->VolDevHandle);
6621                 raid_device = _scsih_raid_device_find_by_handle(ioc, handle);
6622                 if (raid_device)
6623                         raid_device->percent_complete =
6624                             event_data->PercentComplete;
6625                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6626         }
6627 }
6628
6629 /**
6630  * _scsih_prep_device_scan - initialize parameters prior to device scan
6631  * @ioc: per adapter object
6632  *
6633  * Set the deleted flag prior to device scan.  If the device is found during
6634  * the scan, then we clear the deleted flag.
6635  */
6636 static void
6637 _scsih_prep_device_scan(struct MPT2SAS_ADAPTER *ioc)
6638 {
6639         struct MPT2SAS_DEVICE *sas_device_priv_data;
6640         struct scsi_device *sdev;
6641
6642         shost_for_each_device(sdev, ioc->shost) {
6643                 sas_device_priv_data = sdev->hostdata;
6644                 if (sas_device_priv_data && sas_device_priv_data->sas_target)
6645                         sas_device_priv_data->sas_target->deleted = 1;
6646         }
6647 }
6648
6649 /**
6650  * _scsih_mark_responding_sas_device - mark a sas_devices as responding
6651  * @ioc: per adapter object
6652  * @sas_address: sas address
6653  * @slot: enclosure slot id
6654  * @handle: device handle
6655  *
6656  * After host reset, find out whether devices are still responding.
6657  * Used in _scsi_remove_unresponsive_sas_devices.
6658  *
6659  * Return nothing.
6660  */
6661 static void
6662 _scsih_mark_responding_sas_device(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
6663     u16 slot, u16 handle)
6664 {
6665         struct MPT2SAS_TARGET *sas_target_priv_data = NULL;
6666         struct scsi_target *starget;
6667         struct _sas_device *sas_device;
6668         unsigned long flags;
6669
6670         spin_lock_irqsave(&ioc->sas_device_lock, flags);
6671         list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
6672                 if (sas_device->sas_address == sas_address &&
6673                     sas_device->slot == slot) {
6674                         sas_device->responding = 1;
6675                         starget = sas_device->starget;
6676                         if (starget && starget->hostdata) {
6677                                 sas_target_priv_data = starget->hostdata;
6678                                 sas_target_priv_data->tm_busy = 0;
6679                                 sas_target_priv_data->deleted = 0;
6680                         } else
6681                                 sas_target_priv_data = NULL;
6682                         if (starget)
6683                                 starget_printk(KERN_INFO, starget,
6684                                     "handle(0x%04x), sas_addr(0x%016llx), "
6685                                     "enclosure logical id(0x%016llx), "
6686                                     "slot(%d)\n", handle,
6687                                     (unsigned long long)sas_device->sas_address,
6688                                     (unsigned long long)
6689                                     sas_device->enclosure_logical_id,
6690                                     sas_device->slot);
6691                         if (sas_device->handle == handle)
6692                                 goto out;
6693                         printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
6694                             sas_device->handle);
6695                         sas_device->handle = handle;
6696                         if (sas_target_priv_data)
6697                                 sas_target_priv_data->handle = handle;
6698                         goto out;
6699                 }
6700         }
6701  out:
6702         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
6703 }
6704
6705 /**
6706  * _scsih_search_responding_sas_devices -
6707  * @ioc: per adapter object
6708  *
6709  * After host reset, find out whether devices are still responding.
6710  * If not remove.
6711  *
6712  * Return nothing.
6713  */
6714 static void
6715 _scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
6716 {
6717         Mpi2SasDevicePage0_t sas_device_pg0;
6718         Mpi2ConfigReply_t mpi_reply;
6719         u16 ioc_status;
6720         __le64 sas_address;
6721         u16 handle;
6722         u32 device_info;
6723         u16 slot;
6724
6725         printk(MPT2SAS_INFO_FMT "search for end-devices: start\n", ioc->name);
6726
6727         if (list_empty(&ioc->sas_device_list))
6728                 goto out;
6729
6730         handle = 0xFFFF;
6731         while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
6732             &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
6733             handle))) {
6734                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
6735                     MPI2_IOCSTATUS_MASK;
6736                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
6737                         break;
6738                 handle = le16_to_cpu(sas_device_pg0.DevHandle);
6739                 device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
6740                 if (!(_scsih_is_end_device(device_info)))
6741                         continue;
6742                 sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
6743                 slot = le16_to_cpu(sas_device_pg0.Slot);
6744                 _scsih_mark_responding_sas_device(ioc, sas_address, slot,
6745                     handle);
6746         }
6747 out:
6748         printk(MPT2SAS_INFO_FMT "search for end-devices: complete\n",
6749             ioc->name);
6750 }
6751
6752 /**
6753  * _scsih_mark_responding_raid_device - mark a raid_device as responding
6754  * @ioc: per adapter object
6755  * @wwid: world wide identifier for raid volume
6756  * @handle: device handle
6757  *
6758  * After host reset, find out whether devices are still responding.
6759  * Used in _scsi_remove_unresponsive_raid_devices.
6760  *
6761  * Return nothing.
6762  */
6763 static void
6764 _scsih_mark_responding_raid_device(struct MPT2SAS_ADAPTER *ioc, u64 wwid,
6765     u16 handle)
6766 {
6767         struct MPT2SAS_TARGET *sas_target_priv_data;
6768         struct scsi_target *starget;
6769         struct _raid_device *raid_device;
6770         unsigned long flags;
6771
6772         spin_lock_irqsave(&ioc->raid_device_lock, flags);
6773         list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
6774                 if (raid_device->wwid == wwid && raid_device->starget) {
6775                         starget = raid_device->starget;
6776                         if (starget && starget->hostdata) {
6777                                 sas_target_priv_data = starget->hostdata;
6778                                 sas_target_priv_data->deleted = 0;
6779                         } else
6780                                 sas_target_priv_data = NULL;
6781                         raid_device->responding = 1;
6782                         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6783                         starget_printk(KERN_INFO, raid_device->starget,
6784                             "handle(0x%04x), wwid(0x%016llx)\n", handle,
6785                             (unsigned long long)raid_device->wwid);
6786                         /*
6787                          * WARPDRIVE: The handles of the PDs might have changed
6788                          * across the host reset so re-initialize the
6789                          * required data for Direct IO
6790                          */
6791                         _scsih_init_warpdrive_properties(ioc, raid_device);
6792                         spin_lock_irqsave(&ioc->raid_device_lock, flags);
6793                         if (raid_device->handle == handle) {
6794                                 spin_unlock_irqrestore(&ioc->raid_device_lock,
6795                                     flags);
6796                                 return;
6797                         }
6798                         printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
6799                             raid_device->handle);
6800                         raid_device->handle = handle;
6801                         if (sas_target_priv_data)
6802                                 sas_target_priv_data->handle = handle;
6803                         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6804                         return;
6805                 }
6806         }
6807
6808         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6809 }
6810
6811 /**
6812  * _scsih_search_responding_raid_devices -
6813  * @ioc: per adapter object
6814  *
6815  * After host reset, find out whether devices are still responding.
6816  * If not remove.
6817  *
6818  * Return nothing.
6819  */
6820 static void
6821 _scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc)
6822 {
6823         Mpi2RaidVolPage1_t volume_pg1;
6824         Mpi2RaidVolPage0_t volume_pg0;
6825         Mpi2RaidPhysDiskPage0_t pd_pg0;
6826         Mpi2ConfigReply_t mpi_reply;
6827         u16 ioc_status;
6828         u16 handle;
6829         u8 phys_disk_num;
6830
6831         if (!ioc->ir_firmware)
6832                 return;
6833
6834         printk(MPT2SAS_INFO_FMT "search for raid volumes: start\n",
6835             ioc->name);
6836
6837         if (list_empty(&ioc->raid_device_list))
6838                 goto out;
6839
6840         handle = 0xFFFF;
6841         while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
6842             &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
6843                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
6844                     MPI2_IOCSTATUS_MASK;
6845                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
6846                         break;
6847                 handle = le16_to_cpu(volume_pg1.DevHandle);
6848
6849                 if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
6850                     &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
6851                      sizeof(Mpi2RaidVolPage0_t)))
6852                         continue;
6853
6854                 if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
6855                     volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
6856                     volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED)
6857                         _scsih_mark_responding_raid_device(ioc,
6858                             le64_to_cpu(volume_pg1.WWID), handle);
6859         }
6860
6861         /* refresh the pd_handles */
6862         if (!ioc->is_warpdrive) {
6863                 phys_disk_num = 0xFF;
6864                 memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
6865                 while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
6866                     &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
6867                     phys_disk_num))) {
6868                         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
6869                             MPI2_IOCSTATUS_MASK;
6870                         if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
6871                                 break;
6872                         phys_disk_num = pd_pg0.PhysDiskNum;
6873                         handle = le16_to_cpu(pd_pg0.DevHandle);
6874                         set_bit(handle, ioc->pd_handles);
6875                 }
6876         }
6877 out:
6878         printk(MPT2SAS_INFO_FMT "search for responding raid volumes: "
6879             "complete\n", ioc->name);
6880 }
6881
6882 /**
6883  * _scsih_mark_responding_expander - mark a expander as responding
6884  * @ioc: per adapter object
6885  * @sas_address: sas address
6886  * @handle:
6887  *
6888  * After host reset, find out whether devices are still responding.
6889  * Used in _scsi_remove_unresponsive_expanders.
6890  *
6891  * Return nothing.
6892  */
6893 static void
6894 _scsih_mark_responding_expander(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
6895      u16 handle)
6896 {
6897         struct _sas_node *sas_expander;
6898         unsigned long flags;
6899         int i;
6900
6901         spin_lock_irqsave(&ioc->sas_node_lock, flags);
6902         list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
6903                 if (sas_expander->sas_address != sas_address)
6904                         continue;
6905                 sas_expander->responding = 1;
6906                 if (sas_expander->handle == handle)
6907                         goto out;
6908                 printk(KERN_INFO "\texpander(0x%016llx): handle changed"
6909                     " from(0x%04x) to (0x%04x)!!!\n",
6910                     (unsigned long long)sas_expander->sas_address,
6911                     sas_expander->handle, handle);
6912                 sas_expander->handle = handle;
6913                 for (i = 0 ; i < sas_expander->num_phys ; i++)
6914                         sas_expander->phy[i].handle = handle;
6915                 goto out;
6916         }
6917  out:
6918         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
6919 }
6920
6921 /**
6922  * _scsih_search_responding_expanders -
6923  * @ioc: per adapter object
6924  *
6925  * After host reset, find out whether devices are still responding.
6926  * If not remove.
6927  *
6928  * Return nothing.
6929  */
6930 static void
6931 _scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc)
6932 {
6933         Mpi2ExpanderPage0_t expander_pg0;
6934         Mpi2ConfigReply_t mpi_reply;
6935         u16 ioc_status;
6936         u64 sas_address;
6937         u16 handle;
6938
6939         printk(MPT2SAS_INFO_FMT "search for expanders: start\n", ioc->name);
6940
6941         if (list_empty(&ioc->sas_expander_list))
6942                 goto out;
6943
6944         handle = 0xFFFF;
6945         while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
6946             MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
6947
6948                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
6949                     MPI2_IOCSTATUS_MASK;
6950                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
6951                         break;
6952
6953                 handle = le16_to_cpu(expander_pg0.DevHandle);
6954                 sas_address = le64_to_cpu(expander_pg0.SASAddress);
6955                 printk(KERN_INFO "\texpander present: handle(0x%04x), "
6956                     "sas_addr(0x%016llx)\n", handle,
6957                     (unsigned long long)sas_address);
6958                 _scsih_mark_responding_expander(ioc, sas_address, handle);
6959         }
6960
6961  out:
6962         printk(MPT2SAS_INFO_FMT "search for expanders: complete\n", ioc->name);
6963 }
6964
6965 /**
6966  * _scsih_remove_unresponding_sas_devices - removing unresponding devices
6967  * @ioc: per adapter object
6968  *
6969  * Return nothing.
6970  */
6971 static void
6972 _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
6973 {
6974         struct _sas_device *sas_device, *sas_device_next;
6975         struct _sas_node *sas_expander, *sas_expander_next;
6976         struct _raid_device *raid_device, *raid_device_next;
6977         struct list_head tmp_list;
6978         unsigned long flags;
6979
6980         printk(MPT2SAS_INFO_FMT "removing unresponding devices: start\n",
6981             ioc->name);
6982
6983         /* removing unresponding end devices */
6984         printk(MPT2SAS_INFO_FMT "removing unresponding devices: end-devices\n",
6985             ioc->name);
6986         list_for_each_entry_safe(sas_device, sas_device_next,
6987             &ioc->sas_device_list, list) {
6988                 if (!sas_device->responding)
6989                         mpt2sas_device_remove_by_sas_address(ioc,
6990                                 sas_device->sas_address);
6991                 else
6992                         sas_device->responding = 0;
6993         }
6994
6995         /* removing unresponding volumes */
6996         if (ioc->ir_firmware) {
6997                 printk(MPT2SAS_INFO_FMT "removing unresponding devices: "
6998                     "volumes\n", ioc->name);
6999                 list_for_each_entry_safe(raid_device, raid_device_next,
7000                     &ioc->raid_device_list, list) {
7001                         if (!raid_device->responding)
7002                                 _scsih_sas_volume_delete(ioc,
7003                                     raid_device->handle);
7004                         else
7005                                 raid_device->responding = 0;
7006                 }
7007         }
7008         /* removing unresponding expanders */
7009         printk(MPT2SAS_INFO_FMT "removing unresponding devices: expanders\n",
7010             ioc->name);
7011         spin_lock_irqsave(&ioc->sas_node_lock, flags);
7012         INIT_LIST_HEAD(&tmp_list);
7013         list_for_each_entry_safe(sas_expander, sas_expander_next,
7014             &ioc->sas_expander_list, list) {
7015                 if (!sas_expander->responding)
7016                         list_move_tail(&sas_expander->list, &tmp_list);
7017                 else
7018                         sas_expander->responding = 0;
7019         }
7020         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
7021         list_for_each_entry_safe(sas_expander, sas_expander_next, &tmp_list,
7022             list) {
7023                 list_del(&sas_expander->list);
7024                 _scsih_expander_node_remove(ioc, sas_expander);
7025         }
7026         printk(MPT2SAS_INFO_FMT "removing unresponding devices: complete\n",
7027             ioc->name);
7028         /* unblock devices */
7029         _scsih_ublock_io_all_device(ioc);
7030 }
7031
7032 static void
7033 _scsih_refresh_expander_links(struct MPT2SAS_ADAPTER *ioc,
7034         struct _sas_node *sas_expander, u16 handle)
7035 {
7036         Mpi2ExpanderPage1_t expander_pg1;
7037         Mpi2ConfigReply_t mpi_reply;
7038         int i;
7039
7040         for (i = 0 ; i < sas_expander->num_phys ; i++) {
7041                 if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply,
7042                     &expander_pg1, i, handle))) {
7043                         printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
7044                             ioc->name, __FILE__, __LINE__, __func__);
7045                         return;
7046                 }
7047
7048                 mpt2sas_transport_update_links(ioc, sas_expander->sas_address,
7049                     le16_to_cpu(expander_pg1.AttachedDevHandle), i,
7050                     expander_pg1.NegotiatedLinkRate >> 4);
7051         }
7052 }
7053
7054 /**
7055  * _scsih_scan_for_devices_after_reset - scan for devices after host reset
7056  * @ioc: per adapter object
7057  *
7058  * Return nothing.
7059  */
7060 static void
7061 _scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc)
7062 {
7063         Mpi2ExpanderPage0_t expander_pg0;
7064         Mpi2SasDevicePage0_t sas_device_pg0;
7065         Mpi2RaidVolPage1_t volume_pg1;
7066         Mpi2RaidVolPage0_t volume_pg0;
7067         Mpi2RaidPhysDiskPage0_t pd_pg0;
7068         Mpi2EventIrConfigElement_t element;
7069         Mpi2ConfigReply_t mpi_reply;
7070         u8 phys_disk_num;
7071         u16 ioc_status;
7072         u16 handle, parent_handle;
7073         u64 sas_address;
7074         struct _sas_device *sas_device;
7075         struct _sas_node *expander_device;
7076         static struct _raid_device *raid_device;
7077         u8 retry_count;
7078         unsigned long flags;
7079
7080         printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name);
7081
7082         _scsih_sas_host_refresh(ioc);
7083
7084         printk(MPT2SAS_INFO_FMT "\tscan devices: expanders start\n",
7085                 ioc->name);
7086         /* expanders */
7087         handle = 0xFFFF;
7088         while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
7089             MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
7090                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7091                     MPI2_IOCSTATUS_MASK;
7092                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
7093                         printk(MPT2SAS_INFO_FMT "\tbreak from expander scan: "
7094                                 "ioc_status(0x%04x), loginfo(0x%08x)\n",
7095                                 ioc->name, ioc_status,
7096                                 le32_to_cpu(mpi_reply.IOCLogInfo));
7097                         break;
7098                 }
7099                 handle = le16_to_cpu(expander_pg0.DevHandle);
7100                 spin_lock_irqsave(&ioc->sas_node_lock, flags);
7101                 expander_device = mpt2sas_scsih_expander_find_by_sas_address(
7102                     ioc, le64_to_cpu(expander_pg0.SASAddress));
7103                 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
7104                 if (expander_device)
7105                         _scsih_refresh_expander_links(ioc, expander_device,
7106                             handle);
7107                 else {
7108                         printk(MPT2SAS_INFO_FMT "\tBEFORE adding expander: "
7109                                 "handle (0x%04x), sas_addr(0x%016llx)\n",
7110                                 ioc->name, handle, (unsigned long long)
7111                                 le64_to_cpu(expander_pg0.SASAddress));
7112                         _scsih_expander_add(ioc, handle);
7113                         printk(MPT2SAS_INFO_FMT "\tAFTER adding expander: "
7114                                 "handle (0x%04x), sas_addr(0x%016llx)\n",
7115                                 ioc->name, handle, (unsigned long long)
7116                                 le64_to_cpu(expander_pg0.SASAddress));
7117                 }
7118         }
7119
7120         printk(MPT2SAS_INFO_FMT "\tscan devices: expanders complete\n",
7121                 ioc->name);
7122
7123         if (!ioc->ir_firmware)
7124                 goto skip_to_sas;
7125
7126         printk(MPT2SAS_INFO_FMT "\tscan devices phys disk start\n", ioc->name);
7127         /* phys disk */
7128         phys_disk_num = 0xFF;
7129         while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
7130             &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
7131             phys_disk_num))) {
7132                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7133                     MPI2_IOCSTATUS_MASK;
7134                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
7135                         printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan:"
7136                                 "ioc_status(0x%04x), loginfo(0x%08x)\n",
7137                                 ioc->name, ioc_status,
7138                                 le32_to_cpu(mpi_reply.IOCLogInfo));
7139                         break;
7140                 }
7141                 phys_disk_num = pd_pg0.PhysDiskNum;
7142                 handle = le16_to_cpu(pd_pg0.DevHandle);
7143                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
7144                 sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
7145                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
7146                 if (sas_device)
7147                         continue;
7148                 if (mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
7149                     &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
7150                     handle) != 0)
7151                         continue;
7152                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7153                         MPI2_IOCSTATUS_MASK;
7154                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
7155                         printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan "
7156                                 "ioc_status(0x%04x), loginfo(0x%08x)\n",
7157                                 ioc->name, ioc_status,
7158                                 le32_to_cpu(mpi_reply.IOCLogInfo));
7159                         break;
7160                 }
7161                 parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
7162                 if (!_scsih_get_sas_address(ioc, parent_handle,
7163                     &sas_address)) {
7164                         printk(MPT2SAS_INFO_FMT "\tBEFORE adding phys disk: "
7165                                 " handle (0x%04x), sas_addr(0x%016llx)\n",
7166                                 ioc->name, handle, (unsigned long long)
7167                                 le64_to_cpu(sas_device_pg0.SASAddress));
7168                         mpt2sas_transport_update_links(ioc, sas_address,
7169                             handle, sas_device_pg0.PhyNum,
7170                             MPI2_SAS_NEG_LINK_RATE_1_5);
7171                         set_bit(handle, ioc->pd_handles);
7172                         retry_count = 0;
7173                         /* This will retry adding the end device.
7174                         * _scsih_add_device() will decide on retries and
7175                         * return "1" when it should be retried
7176                         */
7177                         while (_scsih_add_device(ioc, handle, retry_count++,
7178                                 1)) {
7179                                         ssleep(1);
7180                         }
7181                         printk(MPT2SAS_INFO_FMT "\tAFTER adding phys disk: "
7182                                 " handle (0x%04x), sas_addr(0x%016llx)\n",
7183                                 ioc->name, handle, (unsigned long long)
7184                                 le64_to_cpu(sas_device_pg0.SASAddress));
7185                 }
7186         }
7187
7188         printk(MPT2SAS_INFO_FMT "\tscan devices: phys disk complete\n",
7189                 ioc->name);
7190
7191         printk(MPT2SAS_INFO_FMT "\tscan devices: volumes start\n", ioc->name);
7192         /* volumes */
7193         handle = 0xFFFF;
7194         while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
7195             &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
7196                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7197                     MPI2_IOCSTATUS_MASK;
7198                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
7199                         printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: "
7200                                 "ioc_status(0x%04x), loginfo(0x%08x)\n",
7201                                 ioc->name, ioc_status,
7202                                 le32_to_cpu(mpi_reply.IOCLogInfo));
7203                         break;
7204                 }
7205                 handle = le16_to_cpu(volume_pg1.DevHandle);
7206                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
7207                 raid_device = _scsih_raid_device_find_by_wwid(ioc,
7208                     le64_to_cpu(volume_pg1.WWID));
7209                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
7210                 if (raid_device)
7211                         continue;
7212                 if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
7213                     &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
7214                      sizeof(Mpi2RaidVolPage0_t)))
7215                         continue;
7216                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7217                         MPI2_IOCSTATUS_MASK;
7218                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
7219                         printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: "
7220                                 "ioc_status(0x%04x), loginfo(0x%08x)\n",
7221                                 ioc->name, ioc_status,
7222                                 le32_to_cpu(mpi_reply.IOCLogInfo));
7223                         break;
7224                 }
7225                 if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
7226                     volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
7227                     volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
7228                         memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
7229                         element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
7230                         element.VolDevHandle = volume_pg1.DevHandle;
7231                         printk(MPT2SAS_INFO_FMT "\tBEFORE adding volume: "
7232                                 " handle (0x%04x)\n", ioc->name,
7233                                 volume_pg1.DevHandle);
7234                         _scsih_sas_volume_add(ioc, &element);
7235                         printk(MPT2SAS_INFO_FMT "\tAFTER adding volume: "
7236                                 " handle (0x%04x)\n", ioc->name,
7237                                 volume_pg1.DevHandle);
7238                 }
7239         }
7240
7241         printk(MPT2SAS_INFO_FMT "\tscan devices: volumes complete\n",
7242                 ioc->name);
7243
7244  skip_to_sas:
7245
7246         printk(MPT2SAS_INFO_FMT "\tscan devices: end devices start\n",
7247                 ioc->name);
7248         /* sas devices */
7249         handle = 0xFFFF;
7250         while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply,
7251             &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
7252             handle))) {
7253                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7254                     MPI2_IOCSTATUS_MASK;
7255                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
7256                         printk(MPT2SAS_INFO_FMT "\tbreak from end device scan:"
7257                                 " ioc_status(0x%04x), loginfo(0x%08x)\n",
7258                                 ioc->name, ioc_status,
7259                                 le32_to_cpu(mpi_reply.IOCLogInfo));
7260                                 break;
7261                 }
7262                 handle = le16_to_cpu(sas_device_pg0.DevHandle);
7263                 if (!(_scsih_is_end_device(
7264                     le32_to_cpu(sas_device_pg0.DeviceInfo))))
7265                         continue;
7266                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
7267                 sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
7268                     le64_to_cpu(sas_device_pg0.SASAddress));
7269                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
7270                 if (sas_device)
7271                         continue;
7272                 parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
7273                 if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
7274                         printk(MPT2SAS_INFO_FMT "\tBEFORE adding end device: "
7275                                 "handle (0x%04x), sas_addr(0x%016llx)\n",
7276                                 ioc->name, handle, (unsigned long long)
7277                                 le64_to_cpu(sas_device_pg0.SASAddress));
7278                         mpt2sas_transport_update_links(ioc, sas_address, handle,
7279                             sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
7280                         retry_count = 0;
7281                         /* This will retry adding the end device.
7282                          * _scsih_add_device() will decide on retries and
7283                          * return "1" when it should be retried
7284                          */
7285                         while (_scsih_add_device(ioc, handle, retry_count++,
7286                                 0)) {
7287                                         ssleep(1);
7288                         }
7289                         printk(MPT2SAS_INFO_FMT "\tAFTER adding end device: "
7290                                 "handle (0x%04x), sas_addr(0x%016llx)\n",
7291                                 ioc->name, handle, (unsigned long long)
7292                                 le64_to_cpu(sas_device_pg0.SASAddress));
7293                 }
7294         }
7295
7296         printk(MPT2SAS_INFO_FMT "\tscan devices: end devices complete\n",
7297                 ioc->name);
7298
7299         printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name);
7300 }
7301
7302
7303 /**
7304  * mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
7305  * @ioc: per adapter object
7306  * @reset_phase: phase
7307  *
7308  * The handler for doing any required cleanup or initialization.
7309  *
7310  * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
7311  * MPT2_IOC_DONE_RESET
7312  *
7313  * Return nothing.
7314  */
7315 void
7316 mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
7317 {
7318         switch (reset_phase) {
7319         case MPT2_IOC_PRE_RESET:
7320                 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
7321                     "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
7322                 break;
7323         case MPT2_IOC_AFTER_RESET:
7324                 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
7325                     "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
7326                 if (ioc->scsih_cmds.status & MPT2_CMD_PENDING) {
7327                         ioc->scsih_cmds.status |= MPT2_CMD_RESET;
7328                         mpt2sas_base_free_smid(ioc, ioc->scsih_cmds.smid);
7329                         complete(&ioc->scsih_cmds.done);
7330                 }
7331                 if (ioc->tm_cmds.status & MPT2_CMD_PENDING) {
7332                         ioc->tm_cmds.status |= MPT2_CMD_RESET;
7333                         mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid);
7334                         complete(&ioc->tm_cmds.done);
7335                 }
7336                 _scsih_fw_event_cleanup_queue(ioc);
7337                 _scsih_flush_running_cmds(ioc);
7338                 break;
7339         case MPT2_IOC_DONE_RESET:
7340                 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
7341                     "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
7342                 _scsih_sas_host_refresh(ioc);
7343                 _scsih_prep_device_scan(ioc);
7344                 _scsih_search_responding_sas_devices(ioc);
7345                 _scsih_search_responding_raid_devices(ioc);
7346                 _scsih_search_responding_expanders(ioc);
7347                 if ((!ioc->is_driver_loading) && !(disable_discovery > 0 &&
7348                     !ioc->sas_hba.num_phys)) {
7349                         _scsih_prep_device_scan(ioc);
7350                         _scsih_search_responding_sas_devices(ioc);
7351                         _scsih_search_responding_raid_devices(ioc);
7352                         _scsih_search_responding_expanders(ioc);
7353                         _scsih_error_recovery_delete_devices(ioc);
7354                 }
7355                 break;
7356         }
7357 }
7358
7359 /**
7360  * _firmware_event_work - delayed task for processing firmware events
7361  * @ioc: per adapter object
7362  * @work: equal to the fw_event_work object
7363  * Context: user.
7364  *
7365  * Return nothing.
7366  */
7367 static void
7368 _firmware_event_work(struct work_struct *work)
7369 {
7370         struct fw_event_work *fw_event = container_of(work,
7371             struct fw_event_work, delayed_work.work);
7372         struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
7373
7374         /* the queue is being flushed so ignore this event */
7375         if (ioc->remove_host ||
7376             ioc->pci_error_recovery) {
7377                 _scsih_fw_event_free(ioc, fw_event);
7378                 return;
7379         }
7380
7381         switch (fw_event->event) {
7382         case MPT2SAS_REMOVE_UNRESPONDING_DEVICES:
7383                 while (scsi_host_in_recovery(ioc->shost) || ioc->shost_recovery)
7384                         ssleep(1);
7385                 _scsih_remove_unresponding_sas_devices(ioc);
7386                 _scsih_scan_for_devices_after_reset(ioc);
7387                 break;
7388         case MPT2SAS_PORT_ENABLE_COMPLETE:
7389                 ioc->start_scan = 0;
7390
7391                 if (missing_delay[0] != -1 && missing_delay[1] != -1)
7392                         mpt2sas_base_update_missing_delay(ioc, missing_delay[0],
7393                                 missing_delay[1]);
7394
7395                 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete "
7396                     "from worker thread\n", ioc->name));
7397                 break;
7398         case MPT2SAS_TURN_ON_PFA_LED:
7399                 _scsih_turn_on_pfa_led(ioc, fw_event->device_handle);
7400                 break;
7401         case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
7402                 _scsih_sas_topology_change_event(ioc, fw_event);
7403                 break;
7404         case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
7405                 _scsih_sas_device_status_change_event(ioc,
7406                     fw_event);
7407                 break;
7408         case MPI2_EVENT_SAS_DISCOVERY:
7409                 _scsih_sas_discovery_event(ioc,
7410                     fw_event);
7411                 break;
7412         case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
7413                 _scsih_sas_broadcast_primitive_event(ioc,
7414                     fw_event);
7415                 break;
7416         case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
7417                 _scsih_sas_enclosure_dev_status_change_event(ioc,
7418                     fw_event);
7419                 break;
7420         case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
7421                 _scsih_sas_ir_config_change_event(ioc, fw_event);
7422                 break;
7423         case MPI2_EVENT_IR_VOLUME:
7424                 _scsih_sas_ir_volume_event(ioc, fw_event);
7425                 break;
7426         case MPI2_EVENT_IR_PHYSICAL_DISK:
7427                 _scsih_sas_ir_physical_disk_event(ioc, fw_event);
7428                 break;
7429         case MPI2_EVENT_IR_OPERATION_STATUS:
7430                 _scsih_sas_ir_operation_status_event(ioc, fw_event);
7431                 break;
7432         }
7433         _scsih_fw_event_free(ioc, fw_event);
7434 }
7435
7436 /**
7437  * mpt2sas_scsih_event_callback - firmware event handler (called at ISR time)
7438  * @ioc: per adapter object
7439  * @msix_index: MSIX table index supplied by the OS
7440  * @reply: reply message frame(lower 32bit addr)
7441  * Context: interrupt.
7442  *
7443  * This function merely adds a new work task into ioc->firmware_event_thread.
7444  * The tasks are worked from _firmware_event_work in user context.
7445  *
7446  * Returns void.
7447  */
7448 void
7449 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
7450         u32 reply)
7451 {
7452         struct fw_event_work *fw_event;
7453         Mpi2EventNotificationReply_t *mpi_reply;
7454         u16 event;
7455         u16 sz;
7456
7457         /* events turned off due to host reset or driver unloading */
7458         if (ioc->remove_host || ioc->pci_error_recovery)
7459                 return;
7460
7461         mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
7462
7463         if (unlikely(!mpi_reply)) {
7464                 printk(MPT2SAS_ERR_FMT "mpi_reply not valid at %s:%d/%s()!\n",
7465                     ioc->name, __FILE__, __LINE__, __func__);
7466                 return;
7467         }
7468
7469         event = le16_to_cpu(mpi_reply->Event);
7470
7471         switch (event) {
7472         /* handle these */
7473         case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
7474         {
7475                 Mpi2EventDataSasBroadcastPrimitive_t *baen_data =
7476                     (Mpi2EventDataSasBroadcastPrimitive_t *)
7477                     mpi_reply->EventData;
7478
7479                 if (baen_data->Primitive !=
7480                     MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT)
7481                         return;
7482
7483                 if (ioc->broadcast_aen_busy) {
7484                         ioc->broadcast_aen_pending++;
7485                         return;
7486                 } else
7487                         ioc->broadcast_aen_busy = 1;
7488                 break;
7489         }
7490
7491         case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
7492                 _scsih_check_topo_delete_events(ioc,
7493                     (Mpi2EventDataSasTopologyChangeList_t *)
7494                     mpi_reply->EventData);
7495                 break;
7496         case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
7497                 _scsih_check_ir_config_unhide_events(ioc,
7498                     (Mpi2EventDataIrConfigChangeList_t *)
7499                     mpi_reply->EventData);
7500                 break;
7501         case MPI2_EVENT_IR_VOLUME:
7502                 _scsih_check_volume_delete_events(ioc,
7503                     (Mpi2EventDataIrVolume_t *)
7504                     mpi_reply->EventData);
7505                 break;
7506         case MPI2_EVENT_LOG_ENTRY_ADDED:
7507         {
7508                 Mpi2EventDataLogEntryAdded_t *log_entry;
7509                 __le32 *log_code;
7510
7511                 if (!ioc->is_warpdrive)
7512                         break;
7513
7514                 log_entry = (Mpi2EventDataLogEntryAdded_t *)
7515                     mpi_reply->EventData;
7516                 log_code = (__le32 *)log_entry->LogData;
7517
7518                 if (le16_to_cpu(log_entry->LogEntryQualifier)
7519                     != MPT2_WARPDRIVE_LOGENTRY)
7520                         break;
7521
7522                 switch (le32_to_cpu(*log_code)) {
7523                 case MPT2_WARPDRIVE_LC_SSDT:
7524                         printk(MPT2SAS_WARN_FMT "WarpDrive Warning: "
7525                             "IO Throttling has occurred in the WarpDrive "
7526                             "subsystem. Check WarpDrive documentation for "
7527                             "additional details.\n", ioc->name);
7528                         break;
7529                 case MPT2_WARPDRIVE_LC_SSDLW:
7530                         printk(MPT2SAS_WARN_FMT "WarpDrive Warning: "
7531                             "Program/Erase Cycles for the WarpDrive subsystem "
7532                             "in degraded range. Check WarpDrive documentation "
7533                             "for additional details.\n", ioc->name);
7534                         break;
7535                 case MPT2_WARPDRIVE_LC_SSDLF:
7536                         printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: "
7537                             "There are no Program/Erase Cycles for the "
7538                             "WarpDrive subsystem. The storage device will be "
7539                             "in read-only mode. Check WarpDrive documentation "
7540                             "for additional details.\n", ioc->name);
7541                         break;
7542                 case MPT2_WARPDRIVE_LC_BRMF:
7543                         printk(MPT2SAS_ERR_FMT "WarpDrive Fatal Error: "
7544                             "The Backup Rail Monitor has failed on the "
7545                             "WarpDrive subsystem. Check WarpDrive "
7546                             "documentation for additional details.\n",
7547                             ioc->name);
7548                         break;
7549                 }
7550
7551                 break;
7552         }
7553         case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
7554         case MPI2_EVENT_IR_OPERATION_STATUS:
7555         case MPI2_EVENT_SAS_DISCOVERY:
7556         case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
7557         case MPI2_EVENT_IR_PHYSICAL_DISK:
7558                 break;
7559
7560         default: /* ignore the rest */
7561                 return;
7562         }
7563
7564         sz = le16_to_cpu(mpi_reply->EventDataLength) * 4;
7565         fw_event = kzalloc(sizeof(*fw_event) + sz, GFP_ATOMIC);
7566         if (!fw_event) {
7567                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
7568                     ioc->name, __FILE__, __LINE__, __func__);
7569                 return;
7570         }
7571
7572         memcpy(fw_event->event_data, mpi_reply->EventData, sz);
7573         fw_event->ioc = ioc;
7574         fw_event->VF_ID = mpi_reply->VF_ID;
7575         fw_event->VP_ID = mpi_reply->VP_ID;
7576         fw_event->event = event;
7577         _scsih_fw_event_add(ioc, fw_event);
7578         return;
7579 }
7580
7581 /* shost template */
7582 static struct scsi_host_template scsih_driver_template = {
7583         .module                         = THIS_MODULE,
7584         .name                           = "Fusion MPT SAS Host",
7585         .proc_name                      = MPT2SAS_DRIVER_NAME,
7586         .queuecommand                   = _scsih_qcmd,
7587         .target_alloc                   = _scsih_target_alloc,
7588         .slave_alloc                    = _scsih_slave_alloc,
7589         .slave_configure                = _scsih_slave_configure,
7590         .target_destroy                 = _scsih_target_destroy,
7591         .slave_destroy                  = _scsih_slave_destroy,
7592         .scan_finished                  = _scsih_scan_finished,
7593         .scan_start                     = _scsih_scan_start,
7594         .change_queue_depth             = _scsih_change_queue_depth,
7595         .eh_abort_handler               = _scsih_abort,
7596         .eh_device_reset_handler        = _scsih_dev_reset,
7597         .eh_target_reset_handler        = _scsih_target_reset,
7598         .eh_host_reset_handler          = _scsih_host_reset,
7599         .bios_param                     = _scsih_bios_param,
7600         .can_queue                      = 1,
7601         .this_id                        = -1,
7602         .sg_tablesize                   = MPT2SAS_SG_DEPTH,
7603         .max_sectors                    = 32767,
7604         .cmd_per_lun                    = 7,
7605         .use_clustering                 = ENABLE_CLUSTERING,
7606         .shost_attrs                    = mpt2sas_host_attrs,
7607         .sdev_attrs                     = mpt2sas_dev_attrs,
7608         .track_queue_depth              = 1,
7609 };
7610
7611 /**
7612  * _scsih_expander_node_remove - removing expander device from list.
7613  * @ioc: per adapter object
7614  * @sas_expander: the sas_device object
7615  * Context: Calling function should acquire ioc->sas_node_lock.
7616  *
7617  * Removing object and freeing associated memory from the
7618  * ioc->sas_expander_list.
7619  *
7620  * Return nothing.
7621  */
7622 static void
7623 _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
7624     struct _sas_node *sas_expander)
7625 {
7626         struct _sas_port *mpt2sas_port, *next;
7627
7628         /* remove sibling ports attached to this expander */
7629         list_for_each_entry_safe(mpt2sas_port, next,
7630            &sas_expander->sas_port_list, port_list) {
7631                 if (ioc->shost_recovery)
7632                         return;
7633                 if (mpt2sas_port->remote_identify.device_type ==
7634                     SAS_END_DEVICE)
7635                         mpt2sas_device_remove_by_sas_address(ioc,
7636                             mpt2sas_port->remote_identify.sas_address);
7637                 else if (mpt2sas_port->remote_identify.device_type ==
7638                     SAS_EDGE_EXPANDER_DEVICE ||
7639                     mpt2sas_port->remote_identify.device_type ==
7640                     SAS_FANOUT_EXPANDER_DEVICE)
7641                         mpt2sas_expander_remove(ioc,
7642                             mpt2sas_port->remote_identify.sas_address);
7643         }
7644
7645         mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
7646             sas_expander->sas_address_parent);
7647
7648         printk(MPT2SAS_INFO_FMT "expander_remove: handle"
7649            "(0x%04x), sas_addr(0x%016llx)\n", ioc->name,
7650             sas_expander->handle, (unsigned long long)
7651             sas_expander->sas_address);
7652
7653         kfree(sas_expander->phy);
7654         kfree(sas_expander);
7655 }
7656
7657 /**
7658  * _scsih_ir_shutdown - IR shutdown notification
7659  * @ioc: per adapter object
7660  *
7661  * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
7662  * the host system is shutting down.
7663  *
7664  * Return nothing.
7665  */
7666 static void
7667 _scsih_ir_shutdown(struct MPT2SAS_ADAPTER *ioc)
7668 {
7669         Mpi2RaidActionRequest_t *mpi_request;
7670         Mpi2RaidActionReply_t *mpi_reply;
7671         u16 smid;
7672
7673         /* is IR firmware build loaded ? */
7674         if (!ioc->ir_firmware)
7675                 return;
7676
7677         mutex_lock(&ioc->scsih_cmds.mutex);
7678
7679         if (ioc->scsih_cmds.status != MPT2_CMD_NOT_USED) {
7680                 printk(MPT2SAS_ERR_FMT "%s: scsih_cmd in use\n",
7681                     ioc->name, __func__);
7682                 goto out;
7683         }
7684         ioc->scsih_cmds.status = MPT2_CMD_PENDING;
7685
7686         smid = mpt2sas_base_get_smid(ioc, ioc->scsih_cb_idx);
7687         if (!smid) {
7688                 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
7689                     ioc->name, __func__);
7690                 ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
7691                 goto out;
7692         }
7693
7694         mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
7695         ioc->scsih_cmds.smid = smid;
7696         memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
7697
7698         mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
7699         mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
7700
7701         if (!ioc->hide_ir_msg)
7702                 printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name);
7703         init_completion(&ioc->scsih_cmds.done);
7704         mpt2sas_base_put_smid_default(ioc, smid);
7705         wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
7706
7707         if (!(ioc->scsih_cmds.status & MPT2_CMD_COMPLETE)) {
7708                 printk(MPT2SAS_ERR_FMT "%s: timeout\n",
7709                     ioc->name, __func__);
7710                 goto out;
7711         }
7712
7713         if (ioc->scsih_cmds.status & MPT2_CMD_REPLY_VALID) {
7714                 mpi_reply = ioc->scsih_cmds.reply;
7715
7716                 if (!ioc->hide_ir_msg)
7717                         printk(MPT2SAS_INFO_FMT "IR shutdown (complete): "
7718                             "ioc_status(0x%04x), loginfo(0x%08x)\n",
7719                             ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
7720                             le32_to_cpu(mpi_reply->IOCLogInfo));
7721         }
7722
7723  out:
7724         ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
7725         mutex_unlock(&ioc->scsih_cmds.mutex);
7726 }
7727
7728 /**
7729  * _scsih_shutdown - routine call during system shutdown
7730  * @pdev: PCI device struct
7731  *
7732  * Return nothing.
7733  */
7734 static void
7735 _scsih_shutdown(struct pci_dev *pdev)
7736 {
7737         struct Scsi_Host *shost = pci_get_drvdata(pdev);
7738         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
7739         struct workqueue_struct *wq;
7740         unsigned long flags;
7741
7742         ioc->remove_host = 1;
7743         _scsih_fw_event_cleanup_queue(ioc);
7744
7745         spin_lock_irqsave(&ioc->fw_event_lock, flags);
7746         wq = ioc->firmware_event_thread;
7747         ioc->firmware_event_thread = NULL;
7748         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
7749         if (wq)
7750                 destroy_workqueue(wq);
7751
7752         _scsih_ir_shutdown(ioc);
7753         mpt2sas_base_detach(ioc);
7754 }
7755
7756 /**
7757  * _scsih_remove - detach and remove add host
7758  * @pdev: PCI device struct
7759  *
7760  * Routine called when unloading the driver.
7761  * Return nothing.
7762  */
7763 static void
7764 _scsih_remove(struct pci_dev *pdev)
7765 {
7766         struct Scsi_Host *shost = pci_get_drvdata(pdev);
7767         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
7768         struct _sas_port *mpt2sas_port, *next_port;
7769         struct _raid_device *raid_device, *next;
7770         struct MPT2SAS_TARGET *sas_target_priv_data;
7771         struct workqueue_struct *wq;
7772         unsigned long flags;
7773
7774         ioc->remove_host = 1;
7775         _scsih_fw_event_cleanup_queue(ioc);
7776
7777         spin_lock_irqsave(&ioc->fw_event_lock, flags);
7778         wq = ioc->firmware_event_thread;
7779         ioc->firmware_event_thread = NULL;
7780         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
7781         if (wq)
7782                 destroy_workqueue(wq);
7783
7784         /* release all the volumes */
7785         _scsih_ir_shutdown(ioc);
7786         list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
7787             list) {
7788                 if (raid_device->starget) {
7789                         sas_target_priv_data =
7790                             raid_device->starget->hostdata;
7791                         sas_target_priv_data->deleted = 1;
7792                         scsi_remove_target(&raid_device->starget->dev);
7793                 }
7794                 printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid"
7795                     "(0x%016llx)\n", ioc->name,  raid_device->handle,
7796                     (unsigned long long) raid_device->wwid);
7797                 _scsih_raid_device_remove(ioc, raid_device);
7798         }
7799
7800         /* free ports attached to the sas_host */
7801         list_for_each_entry_safe(mpt2sas_port, next_port,
7802            &ioc->sas_hba.sas_port_list, port_list) {
7803                 if (mpt2sas_port->remote_identify.device_type ==
7804                     SAS_END_DEVICE)
7805                         mpt2sas_device_remove_by_sas_address(ioc,
7806                             mpt2sas_port->remote_identify.sas_address);
7807                 else if (mpt2sas_port->remote_identify.device_type ==
7808                     SAS_EDGE_EXPANDER_DEVICE ||
7809                     mpt2sas_port->remote_identify.device_type ==
7810                     SAS_FANOUT_EXPANDER_DEVICE)
7811                         mpt2sas_expander_remove(ioc,
7812                             mpt2sas_port->remote_identify.sas_address);
7813         }
7814
7815         /* free phys attached to the sas_host */
7816         if (ioc->sas_hba.num_phys) {
7817                 kfree(ioc->sas_hba.phy);
7818                 ioc->sas_hba.phy = NULL;
7819                 ioc->sas_hba.num_phys = 0;
7820         }
7821
7822         sas_remove_host(shost);
7823         scsi_remove_host(shost);
7824         mpt2sas_base_detach(ioc);
7825         list_del(&ioc->list);
7826         scsi_host_put(shost);
7827 }
7828
7829 /**
7830  * _scsih_probe_boot_devices - reports 1st device
7831  * @ioc: per adapter object
7832  *
7833  * If specified in bios page 2, this routine reports the 1st
7834  * device scsi-ml or sas transport for persistent boot device
7835  * purposes.  Please refer to function _scsih_determine_boot_device()
7836  */
7837 static void
7838 _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc)
7839 {
7840         u8 is_raid;
7841         void *device;
7842         struct _sas_device *sas_device;
7843         struct _raid_device *raid_device;
7844         u16 handle;
7845         u64 sas_address_parent;
7846         u64 sas_address;
7847         unsigned long flags;
7848         int rc;
7849
7850          /* no Bios, return immediately */
7851         if (!ioc->bios_pg3.BiosVersion)
7852                 return;
7853
7854         device = NULL;
7855         is_raid = 0;
7856         if (ioc->req_boot_device.device) {
7857                 device =  ioc->req_boot_device.device;
7858                 is_raid = ioc->req_boot_device.is_raid;
7859         } else if (ioc->req_alt_boot_device.device) {
7860                 device =  ioc->req_alt_boot_device.device;
7861                 is_raid = ioc->req_alt_boot_device.is_raid;
7862         } else if (ioc->current_boot_device.device) {
7863                 device =  ioc->current_boot_device.device;
7864                 is_raid = ioc->current_boot_device.is_raid;
7865         }
7866
7867         if (!device)
7868                 return;
7869
7870         if (is_raid) {
7871                 raid_device = device;
7872                 rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
7873                     raid_device->id, 0);
7874                 if (rc)
7875                         _scsih_raid_device_remove(ioc, raid_device);
7876         } else {
7877                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
7878                 sas_device = device;
7879                 handle = sas_device->handle;
7880                 sas_address_parent = sas_device->sas_address_parent;
7881                 sas_address = sas_device->sas_address;
7882                 list_move_tail(&sas_device->list, &ioc->sas_device_list);
7883                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
7884
7885                 if (ioc->hide_drives)
7886                         return;
7887                 if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
7888                     sas_device->sas_address_parent)) {
7889                         _scsih_sas_device_remove(ioc, sas_device);
7890                 } else if (!sas_device->starget) {
7891                         if (!ioc->is_driver_loading) {
7892                                 mpt2sas_transport_port_remove(ioc,
7893                                         sas_address,
7894                                         sas_address_parent);
7895                                 _scsih_sas_device_remove(ioc, sas_device);
7896                         }
7897                 }
7898         }
7899 }
7900
7901 /**
7902  * _scsih_probe_raid - reporting raid volumes to scsi-ml
7903  * @ioc: per adapter object
7904  *
7905  * Called during initial loading of the driver.
7906  */
7907 static void
7908 _scsih_probe_raid(struct MPT2SAS_ADAPTER *ioc)
7909 {
7910         struct _raid_device *raid_device, *raid_next;
7911         int rc;
7912
7913         list_for_each_entry_safe(raid_device, raid_next,
7914             &ioc->raid_device_list, list) {
7915                 if (raid_device->starget)
7916                         continue;
7917                 rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
7918                     raid_device->id, 0);
7919                 if (rc)
7920                         _scsih_raid_device_remove(ioc, raid_device);
7921         }
7922 }
7923
7924 /**
7925  * _scsih_probe_sas - reporting sas devices to sas transport
7926  * @ioc: per adapter object
7927  *
7928  * Called during initial loading of the driver.
7929  */
7930 static void
7931 _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc)
7932 {
7933         struct _sas_device *sas_device, *next;
7934         unsigned long flags;
7935
7936         /* SAS Device List */
7937         list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
7938             list) {
7939
7940                 if (ioc->hide_drives)
7941                         continue;
7942
7943                 if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
7944                     sas_device->sas_address_parent)) {
7945                         list_del(&sas_device->list);
7946                         kfree(sas_device);
7947                         continue;
7948                 } else if (!sas_device->starget) {
7949                         if (!ioc->is_driver_loading) {
7950                                 mpt2sas_transport_port_remove(ioc,
7951                                         sas_device->sas_address,
7952                                         sas_device->sas_address_parent);
7953                                 list_del(&sas_device->list);
7954                                 kfree(sas_device);
7955                                 continue;
7956                         }
7957                 }
7958                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
7959                 list_move_tail(&sas_device->list, &ioc->sas_device_list);
7960                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
7961         }
7962 }
7963
7964 /**
7965  * _scsih_probe_devices - probing for devices
7966  * @ioc: per adapter object
7967  *
7968  * Called during initial loading of the driver.
7969  */
7970 static void
7971 _scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc)
7972 {
7973         u16 volume_mapping_flags;
7974
7975         if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
7976                 return;  /* return when IOC doesn't support initiator mode */
7977
7978         _scsih_probe_boot_devices(ioc);
7979
7980         if (ioc->ir_firmware) {
7981                 volume_mapping_flags =
7982                     le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
7983                     MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
7984                 if (volume_mapping_flags ==
7985                     MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
7986                         _scsih_probe_raid(ioc);
7987                         _scsih_probe_sas(ioc);
7988                 } else {
7989                         _scsih_probe_sas(ioc);
7990                         _scsih_probe_raid(ioc);
7991                 }
7992         } else
7993                 _scsih_probe_sas(ioc);
7994 }
7995
7996
7997 /**
7998  * _scsih_scan_start - scsi lld callback for .scan_start
7999  * @shost: SCSI host pointer
8000  *
8001  * The shost has the ability to discover targets on its own instead
8002  * of scanning the entire bus.  In our implemention, we will kick off
8003  * firmware discovery.
8004  */
8005 static void
8006 _scsih_scan_start(struct Scsi_Host *shost)
8007 {
8008         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
8009         int rc;
8010
8011         if (diag_buffer_enable != -1 && diag_buffer_enable != 0)
8012                 mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
8013
8014         if (disable_discovery > 0)
8015                 return;
8016
8017         ioc->start_scan = 1;
8018         rc = mpt2sas_port_enable(ioc);
8019
8020         if (rc != 0)
8021                 printk(MPT2SAS_INFO_FMT "port enable: FAILED\n", ioc->name);
8022 }
8023
8024 /**
8025  * _scsih_scan_finished - scsi lld callback for .scan_finished
8026  * @shost: SCSI host pointer
8027  * @time: elapsed time of the scan in jiffies
8028  *
8029  * This function will be called periodically until it returns 1 with the
8030  * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
8031  * we wait for firmware discovery to complete, then return 1.
8032  */
8033 static int
8034 _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
8035 {
8036         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
8037
8038         if (disable_discovery > 0) {
8039                 ioc->is_driver_loading = 0;
8040                 ioc->wait_for_discovery_to_complete = 0;
8041                 return 1;
8042         }
8043
8044         if (time >= (300 * HZ)) {
8045                 ioc->base_cmds.status = MPT2_CMD_NOT_USED;
8046                 printk(MPT2SAS_INFO_FMT "port enable: FAILED with timeout "
8047                     "(timeout=300s)\n", ioc->name);
8048                 ioc->is_driver_loading = 0;
8049                 return 1;
8050         }
8051
8052         if (ioc->start_scan)
8053                 return 0;
8054
8055         if (ioc->start_scan_failed) {
8056                 printk(MPT2SAS_INFO_FMT "port enable: FAILED with "
8057                     "(ioc_status=0x%08x)\n", ioc->name, ioc->start_scan_failed);
8058                 ioc->is_driver_loading = 0;
8059                 ioc->wait_for_discovery_to_complete = 0;
8060                 ioc->remove_host = 1;
8061                 return 1;
8062         }
8063
8064         printk(MPT2SAS_INFO_FMT "port enable: SUCCESS\n", ioc->name);
8065         ioc->base_cmds.status = MPT2_CMD_NOT_USED;
8066
8067         if (ioc->wait_for_discovery_to_complete) {
8068                 ioc->wait_for_discovery_to_complete = 0;
8069                 _scsih_probe_devices(ioc);
8070         }
8071         mpt2sas_base_start_watchdog(ioc);
8072         ioc->is_driver_loading = 0;
8073         return 1;
8074 }
8075
8076
8077 /**
8078  * _scsih_probe - attach and add scsi host
8079  * @pdev: PCI device struct
8080  * @id: pci device id
8081  *
8082  * Returns 0 success, anything else error.
8083  */
8084 static int
8085 _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
8086 {
8087         struct MPT2SAS_ADAPTER *ioc;
8088         struct Scsi_Host *shost;
8089         int rv;
8090
8091         shost = scsi_host_alloc(&scsih_driver_template,
8092             sizeof(struct MPT2SAS_ADAPTER));
8093         if (!shost)
8094                 return -ENODEV;
8095
8096         /* init local params */
8097         ioc = shost_priv(shost);
8098         memset(ioc, 0, sizeof(struct MPT2SAS_ADAPTER));
8099         INIT_LIST_HEAD(&ioc->list);
8100         list_add_tail(&ioc->list, &mpt2sas_ioc_list);
8101         ioc->shost = shost;
8102         ioc->id = mpt_ids++;
8103         sprintf(ioc->name, "%s%d", MPT2SAS_DRIVER_NAME, ioc->id);
8104         ioc->pdev = pdev;
8105         if (id->device == MPI2_MFGPAGE_DEVID_SSS6200) {
8106                 ioc->is_warpdrive = 1;
8107                 ioc->hide_ir_msg = 1;
8108         } else
8109                 ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
8110         ioc->scsi_io_cb_idx = scsi_io_cb_idx;
8111         ioc->tm_cb_idx = tm_cb_idx;
8112         ioc->ctl_cb_idx = ctl_cb_idx;
8113         ioc->base_cb_idx = base_cb_idx;
8114         ioc->port_enable_cb_idx = port_enable_cb_idx;
8115         ioc->transport_cb_idx = transport_cb_idx;
8116         ioc->scsih_cb_idx = scsih_cb_idx;
8117         ioc->config_cb_idx = config_cb_idx;
8118         ioc->tm_tr_cb_idx = tm_tr_cb_idx;
8119         ioc->tm_tr_volume_cb_idx = tm_tr_volume_cb_idx;
8120         ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
8121         ioc->logging_level = logging_level;
8122         ioc->schedule_dead_ioc_flush_running_cmds = &_scsih_flush_running_cmds;
8123         /* misc semaphores and spin locks */
8124         mutex_init(&ioc->reset_in_progress_mutex);
8125         spin_lock_init(&ioc->ioc_reset_in_progress_lock);
8126         spin_lock_init(&ioc->scsi_lookup_lock);
8127         spin_lock_init(&ioc->sas_device_lock);
8128         spin_lock_init(&ioc->sas_node_lock);
8129         spin_lock_init(&ioc->fw_event_lock);
8130         spin_lock_init(&ioc->raid_device_lock);
8131
8132         INIT_LIST_HEAD(&ioc->sas_device_list);
8133         INIT_LIST_HEAD(&ioc->sas_device_init_list);
8134         INIT_LIST_HEAD(&ioc->sas_expander_list);
8135         INIT_LIST_HEAD(&ioc->fw_event_list);
8136         INIT_LIST_HEAD(&ioc->raid_device_list);
8137         INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list);
8138         INIT_LIST_HEAD(&ioc->delayed_tr_list);
8139         INIT_LIST_HEAD(&ioc->delayed_tr_volume_list);
8140         INIT_LIST_HEAD(&ioc->reply_queue_list);
8141
8142         /* init shost parameters */
8143         shost->max_cmd_len = 32;
8144         shost->max_lun = max_lun;
8145         shost->transportt = mpt2sas_transport_template;
8146         shost->unique_id = ioc->id;
8147
8148         if (max_sectors != 0xFFFF) {
8149                 if (max_sectors < 64) {
8150                         shost->max_sectors = 64;
8151                         printk(MPT2SAS_WARN_FMT "Invalid value %d passed "
8152                             "for max_sectors, range is 64 to 32767. Assigning "
8153                             "value of 64.\n", ioc->name, max_sectors);
8154                 } else if (max_sectors > 32767) {
8155                         shost->max_sectors = 32767;
8156                         printk(MPT2SAS_WARN_FMT "Invalid value %d passed "
8157                             "for max_sectors, range is 64 to 8192. Assigning "
8158                             "default value of 32767.\n", ioc->name,
8159                             max_sectors);
8160                 } else {
8161                         shost->max_sectors = max_sectors & 0xFFFE;
8162                         printk(MPT2SAS_INFO_FMT "The max_sectors value is "
8163                             "set to %d\n", ioc->name, shost->max_sectors);
8164                 }
8165         }
8166
8167         /* register EEDP capabilities with SCSI layer */
8168         if (prot_mask)
8169                 scsi_host_set_prot(shost, prot_mask);
8170         else
8171                 scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
8172                                    | SHOST_DIF_TYPE2_PROTECTION
8173                                    | SHOST_DIF_TYPE3_PROTECTION);
8174
8175         scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
8176
8177         /* event thread */
8178         snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
8179             "fw_event%d", ioc->id);
8180         ioc->firmware_event_thread = create_singlethread_workqueue(
8181             ioc->firmware_event_name);
8182         if (!ioc->firmware_event_thread) {
8183                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
8184                     ioc->name, __FILE__, __LINE__, __func__);
8185                 rv = -ENODEV;
8186                 goto out_thread_fail;
8187         }
8188
8189         ioc->is_driver_loading = 1;
8190         if ((mpt2sas_base_attach(ioc))) {
8191                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
8192                     ioc->name, __FILE__, __LINE__, __func__);
8193                 rv = -ENODEV;
8194                 goto out_attach_fail;
8195         }
8196
8197         if (ioc->is_warpdrive) {
8198                 if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS)
8199                         ioc->hide_drives = 0;
8200                 else if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_HIDE_ALL_DISKS)
8201                         ioc->hide_drives = 1;
8202                 else {
8203                         if (_scsih_get_num_volumes(ioc))
8204                                 ioc->hide_drives = 1;
8205                         else
8206                                 ioc->hide_drives = 0;
8207                 }
8208         } else
8209                 ioc->hide_drives = 0;
8210
8211         rv = scsi_add_host(shost, &pdev->dev);
8212         if (rv) {
8213                 printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
8214                     ioc->name, __FILE__, __LINE__, __func__);
8215                 goto out_add_shost_fail;
8216         }
8217
8218         scsi_scan_host(shost);
8219
8220         return 0;
8221
8222  out_add_shost_fail:
8223         mpt2sas_base_detach(ioc);
8224  out_attach_fail:
8225         destroy_workqueue(ioc->firmware_event_thread);
8226  out_thread_fail:
8227         list_del(&ioc->list);
8228         scsi_host_put(shost);
8229         return rv;
8230 }
8231
8232 #ifdef CONFIG_PM
8233 /**
8234  * _scsih_suspend - power management suspend main entry point
8235  * @pdev: PCI device struct
8236  * @state: PM state change to (usually PCI_D3)
8237  *
8238  * Returns 0 success, anything else error.
8239  */
8240 static int
8241 _scsih_suspend(struct pci_dev *pdev, pm_message_t state)
8242 {
8243         struct Scsi_Host *shost = pci_get_drvdata(pdev);
8244         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
8245         pci_power_t device_state;
8246
8247         mpt2sas_base_stop_watchdog(ioc);
8248         scsi_block_requests(shost);
8249         _scsih_ir_shutdown(ioc);
8250         device_state = pci_choose_state(pdev, state);
8251         printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, entering "
8252             "operating state [D%d]\n", ioc->name, pdev,
8253             pci_name(pdev), device_state);
8254
8255         mpt2sas_base_free_resources(ioc);
8256         pci_save_state(pdev);
8257         pci_set_power_state(pdev, device_state);
8258         return 0;
8259 }
8260
8261 /**
8262  * _scsih_resume - power management resume main entry point
8263  * @pdev: PCI device struct
8264  *
8265  * Returns 0 success, anything else error.
8266  */
8267 static int
8268 _scsih_resume(struct pci_dev *pdev)
8269 {
8270         struct Scsi_Host *shost = pci_get_drvdata(pdev);
8271         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
8272         pci_power_t device_state = pdev->current_state;
8273         int r;
8274
8275         printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, previous "
8276             "operating state [D%d]\n", ioc->name, pdev,
8277             pci_name(pdev), device_state);
8278
8279         pci_set_power_state(pdev, PCI_D0);
8280         pci_enable_wake(pdev, PCI_D0, 0);
8281         pci_restore_state(pdev);
8282         ioc->pdev = pdev;
8283         r = mpt2sas_base_map_resources(ioc);
8284         if (r)
8285                 return r;
8286
8287         mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP, SOFT_RESET);
8288         scsi_unblock_requests(shost);
8289         mpt2sas_base_start_watchdog(ioc);
8290         return 0;
8291 }
8292 #endif /* CONFIG_PM */
8293
8294 /**
8295  * _scsih_pci_error_detected - Called when a PCI error is detected.
8296  * @pdev: PCI device struct
8297  * @state: PCI channel state
8298  *
8299  * Description: Called when a PCI error is detected.
8300  *
8301  * Return value:
8302  *      PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
8303  */
8304 static pci_ers_result_t
8305 _scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
8306 {
8307         struct Scsi_Host *shost = pci_get_drvdata(pdev);
8308         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
8309
8310         printk(MPT2SAS_INFO_FMT "PCI error: detected callback, state(%d)!!\n",
8311             ioc->name, state);
8312
8313         switch (state) {
8314         case pci_channel_io_normal:
8315                 return PCI_ERS_RESULT_CAN_RECOVER;
8316         case pci_channel_io_frozen:
8317                 /* Fatal error, prepare for slot reset */
8318                 ioc->pci_error_recovery = 1;
8319                 scsi_block_requests(ioc->shost);
8320                 mpt2sas_base_stop_watchdog(ioc);
8321                 mpt2sas_base_free_resources(ioc);
8322                 return PCI_ERS_RESULT_NEED_RESET;
8323         case pci_channel_io_perm_failure:
8324                 /* Permanent error, prepare for device removal */
8325                 ioc->pci_error_recovery = 1;
8326                 mpt2sas_base_stop_watchdog(ioc);
8327                 _scsih_flush_running_cmds(ioc);
8328                 return PCI_ERS_RESULT_DISCONNECT;
8329         }
8330         return PCI_ERS_RESULT_NEED_RESET;
8331 }
8332
8333 /**
8334  * _scsih_pci_slot_reset - Called when PCI slot has been reset.
8335  * @pdev: PCI device struct
8336  *
8337  * Description: This routine is called by the pci error recovery
8338  * code after the PCI slot has been reset, just before we
8339  * should resume normal operations.
8340  */
8341 static pci_ers_result_t
8342 _scsih_pci_slot_reset(struct pci_dev *pdev)
8343 {
8344         struct Scsi_Host *shost = pci_get_drvdata(pdev);
8345         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
8346         int rc;
8347
8348         printk(MPT2SAS_INFO_FMT "PCI error: slot reset callback!!\n",
8349                 ioc->name);
8350
8351         ioc->pci_error_recovery = 0;
8352         ioc->pdev = pdev;
8353         pci_restore_state(pdev);
8354         rc = mpt2sas_base_map_resources(ioc);
8355         if (rc)
8356                 return PCI_ERS_RESULT_DISCONNECT;
8357
8358
8359         rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
8360             FORCE_BIG_HAMMER);
8361
8362         printk(MPT2SAS_WARN_FMT "hard reset: %s\n", ioc->name,
8363             (rc == 0) ? "success" : "failed");
8364
8365         if (!rc)
8366                 return PCI_ERS_RESULT_RECOVERED;
8367         else
8368                 return PCI_ERS_RESULT_DISCONNECT;
8369 }
8370
8371 /**
8372  * _scsih_pci_resume() - resume normal ops after PCI reset
8373  * @pdev: pointer to PCI device
8374  *
8375  * Called when the error recovery driver tells us that its
8376  * OK to resume normal operation. Use completion to allow
8377  * halted scsi ops to resume.
8378  */
8379 static void
8380 _scsih_pci_resume(struct pci_dev *pdev)
8381 {
8382         struct Scsi_Host *shost = pci_get_drvdata(pdev);
8383         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
8384
8385         printk(MPT2SAS_INFO_FMT "PCI error: resume callback!!\n", ioc->name);
8386
8387         pci_cleanup_aer_uncorrect_error_status(pdev);
8388         mpt2sas_base_start_watchdog(ioc);
8389         scsi_unblock_requests(ioc->shost);
8390 }
8391
8392 /**
8393  * _scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
8394  * @pdev: pointer to PCI device
8395  */
8396 static pci_ers_result_t
8397 _scsih_pci_mmio_enabled(struct pci_dev *pdev)
8398 {
8399         struct Scsi_Host *shost = pci_get_drvdata(pdev);
8400         struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
8401
8402         printk(MPT2SAS_INFO_FMT "PCI error: mmio enabled callback!!\n",
8403             ioc->name);
8404
8405         /* TODO - dump whatever for debugging purposes */
8406
8407         /* Request a slot reset. */
8408         return PCI_ERS_RESULT_NEED_RESET;
8409 }
8410
8411 static const struct pci_error_handlers _scsih_err_handler = {
8412         .error_detected = _scsih_pci_error_detected,
8413         .mmio_enabled = _scsih_pci_mmio_enabled,
8414         .slot_reset =   _scsih_pci_slot_reset,
8415         .resume =       _scsih_pci_resume,
8416 };
8417
8418 static struct pci_driver scsih_driver = {
8419         .name           = MPT2SAS_DRIVER_NAME,
8420         .id_table       = scsih_pci_table,
8421         .probe          = _scsih_probe,
8422         .remove         = _scsih_remove,
8423         .shutdown       = _scsih_shutdown,
8424         .err_handler    = &_scsih_err_handler,
8425 #ifdef CONFIG_PM
8426         .suspend        = _scsih_suspend,
8427         .resume         = _scsih_resume,
8428 #endif
8429 };
8430
8431 /* raid transport support */
8432 static struct raid_function_template mpt2sas_raid_functions = {
8433         .cookie         = &scsih_driver_template,
8434         .is_raid        = _scsih_is_raid,
8435         .get_resync     = _scsih_get_resync,
8436         .get_state      = _scsih_get_state,
8437 };
8438
8439 /**
8440  * _scsih_init - main entry point for this driver.
8441  *
8442  * Returns 0 success, anything else error.
8443  */
8444 static int __init
8445 _scsih_init(void)
8446 {
8447         int error;
8448
8449         mpt_ids = 0;
8450         printk(KERN_INFO "%s version %s loaded\n", MPT2SAS_DRIVER_NAME,
8451             MPT2SAS_DRIVER_VERSION);
8452
8453         mpt2sas_transport_template =
8454             sas_attach_transport(&mpt2sas_transport_functions);
8455         if (!mpt2sas_transport_template)
8456                 return -ENODEV;
8457         /* raid transport support */
8458         mpt2sas_raid_template = raid_class_attach(&mpt2sas_raid_functions);
8459         if (!mpt2sas_raid_template) {
8460                 sas_release_transport(mpt2sas_transport_template);
8461                 return -ENODEV;
8462         }
8463
8464         mpt2sas_base_initialize_callback_handler();
8465
8466          /* queuecommand callback hander */
8467         scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done);
8468
8469         /* task management callback handler */
8470         tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done);
8471
8472         /* base internal commands callback handler */
8473         base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
8474         port_enable_cb_idx = mpt2sas_base_register_callback_handler(
8475                 mpt2sas_port_enable_done);
8476
8477         /* transport internal commands callback handler */
8478         transport_cb_idx = mpt2sas_base_register_callback_handler(
8479             mpt2sas_transport_done);
8480
8481         /* scsih internal commands callback handler */
8482         scsih_cb_idx = mpt2sas_base_register_callback_handler(_scsih_done);
8483
8484         /* configuration page API internal commands callback handler */
8485         config_cb_idx = mpt2sas_base_register_callback_handler(
8486             mpt2sas_config_done);
8487
8488         /* ctl module callback handler */
8489         ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done);
8490
8491         tm_tr_cb_idx = mpt2sas_base_register_callback_handler(
8492             _scsih_tm_tr_complete);
8493
8494         tm_tr_volume_cb_idx = mpt2sas_base_register_callback_handler(
8495             _scsih_tm_volume_tr_complete);
8496
8497         tm_sas_control_cb_idx = mpt2sas_base_register_callback_handler(
8498             _scsih_sas_control_complete);
8499
8500         mpt2sas_ctl_init();
8501
8502         error = pci_register_driver(&scsih_driver);
8503         if (error) {
8504                 /* raid transport support */
8505                 raid_class_release(mpt2sas_raid_template);
8506                 sas_release_transport(mpt2sas_transport_template);
8507         }
8508
8509         return error;
8510 }
8511
8512 /**
8513  * _scsih_exit - exit point for this driver (when it is a module).
8514  *
8515  * Returns 0 success, anything else error.
8516  */
8517 static void __exit
8518 _scsih_exit(void)
8519 {
8520         printk(KERN_INFO "mpt2sas version %s unloading\n",
8521             MPT2SAS_DRIVER_VERSION);
8522
8523         pci_unregister_driver(&scsih_driver);
8524
8525         mpt2sas_ctl_exit();
8526
8527         mpt2sas_base_release_callback_handler(scsi_io_cb_idx);
8528         mpt2sas_base_release_callback_handler(tm_cb_idx);
8529         mpt2sas_base_release_callback_handler(base_cb_idx);
8530         mpt2sas_base_release_callback_handler(port_enable_cb_idx);
8531         mpt2sas_base_release_callback_handler(transport_cb_idx);
8532         mpt2sas_base_release_callback_handler(scsih_cb_idx);
8533         mpt2sas_base_release_callback_handler(config_cb_idx);
8534         mpt2sas_base_release_callback_handler(ctl_cb_idx);
8535
8536         mpt2sas_base_release_callback_handler(tm_tr_cb_idx);
8537         mpt2sas_base_release_callback_handler(tm_tr_volume_cb_idx);
8538         mpt2sas_base_release_callback_handler(tm_sas_control_cb_idx);
8539
8540         /* raid transport support */
8541         raid_class_release(mpt2sas_raid_template);
8542         sas_release_transport(mpt2sas_transport_template);
8543
8544 }
8545
8546 module_init(_scsih_init);
8547 module_exit(_scsih_exit);