drivers/spi/spi-pxa2xx-dma.c

   1 /*
   2  * PXA2xx SPI DMA engine support.
   3  *
   4  * Copyright (C) 2013, Intel Corporation
   5  * Author: Mika Westerberg <[email protected]>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/device.h>
  13 #include <linux/dma-mapping.h>
  14 #include <linux/dmaengine.h>
  15 #include <linux/pxa2xx_ssp.h>
  16 #include <linux/scatterlist.h>
  17 #include <linux/sizes.h>
  18 #include <linux/spi/spi.h>
  19 #include <linux/spi/pxa2xx_spi.h>
  20
  21 #include "spi-pxa2xx.h"
  22
  23 static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data,
  24                                              bool error)
  25 {
  26         struct spi_message *msg = drv_data->controller->cur_msg;
  27
  28         /*
  29          * It is possible that one CPU is handling ROR interrupt and other
  30          * just gets DMA completion. Calling pump_transfers() twice for the
  31          * same transfer leads to problems thus we prevent concurrent calls
  32          * by using ->dma_running.
  33          */
  34         if (atomic_dec_and_test(&drv_data->dma_running)) {
  35                 /*
  36                  * If the other CPU is still handling the ROR interrupt we
  37                  * might not know about the error yet. So we re-check the
  38                  * ROR bit here before we clear the status register.
  39                  */
  40                 if (!error) {
  41                         u32 status = pxa2xx_spi_read(drv_data, SSSR)
  42                                      & drv_data->mask_sr;
  43                         error = status & SSSR_ROR;
  44                 }
  45
  46                 /* Clear status & disable interrupts */
  47                 pxa2xx_spi_write(drv_data, SSCR1,
  48                                  pxa2xx_spi_read(drv_data, SSCR1)
  49                                  & ~drv_data->dma_cr1);
  50                 write_SSSR_CS(drv_data, drv_data->clear_sr);
  51                 if (!pxa25x_ssp_comp(drv_data))
  52                         pxa2xx_spi_write(drv_data, SSTO, 0);
  53
  54                 if (error) {
  55                         /* In case we got an error we disable the SSP now */
  56                         pxa2xx_spi_write(drv_data, SSCR0,
  57                                          pxa2xx_spi_read(drv_data, SSCR0)
  58                                          & ~SSCR0_SSE);
  59                         msg->status = -EIO;
  60                 }
  61
  62                 spi_finalize_current_transfer(drv_data->controller);
  63         }
  64 }
  65
  66 static void pxa2xx_spi_dma_callback(void *data)
  67 {
  68         pxa2xx_spi_dma_transfer_complete(data, false);
  69 }
  70
  71 static struct dma_async_tx_descriptor *
  72 pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
  73                            enum dma_transfer_direction dir,
  74                            struct spi_transfer *xfer)
  75 {
  76         struct chip_data *chip =
  77                 spi_get_ctldata(drv_data->controller->cur_msg->spi);
  78         enum dma_slave_buswidth width;
  79         struct dma_slave_config cfg;
  80         struct dma_chan *chan;
  81         struct sg_table *sgt;
  82         int ret;
  83
  84         switch (drv_data->n_bytes) {
  85         case 1:
  86                 width = DMA_SLAVE_BUSWIDTH_1_BYTE;
  87                 break;
  88         case 2:
  89                 width = DMA_SLAVE_BUSWIDTH_2_BYTES;
  90                 break;
  91         default:
  92                 width = DMA_SLAVE_BUSWIDTH_4_BYTES;
  93                 break;
  94         }
  95
  96         memset(&cfg, 0, sizeof(cfg));
  97         cfg.direction = dir;
  98
  99         if (dir == DMA_MEM_TO_DEV) {
 100                 cfg.dst_addr = drv_data->ssdr_physical;
 101                 cfg.dst_addr_width = width;
 102                 cfg.dst_maxburst = chip->dma_burst_size;
 103
 104                 sgt = &xfer->tx_sg;
 105                 chan = drv_data->controller->dma_tx;
 106         } else {
 107                 cfg.src_addr = drv_data->ssdr_physical;
 108                 cfg.src_addr_width = width;
 109                 cfg.src_maxburst = chip->dma_burst_size;
 110
 111                 sgt = &xfer->rx_sg;
 112                 chan = drv_data->controller->dma_rx;
 113         }
 114
 115         ret = dmaengine_slave_config(chan, &cfg);
 116         if (ret) {
 117                 dev_warn(&drv_data->pdev->dev, "DMA slave config failed\n");
 118                 return NULL;
 119         }
 120
 121         return dmaengine_prep_slave_sg(chan, sgt->sgl, sgt->nents, dir,
 122                                        DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 123 }
 124
 125 irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
 126 {
 127         u32 status;
 128
 129         status = pxa2xx_spi_read(drv_data, SSSR) & drv_data->mask_sr;
 130         if (status & SSSR_ROR) {
 131                 dev_err(&drv_data->pdev->dev, "FIFO overrun\n");
 132
 133                 dmaengine_terminate_async(drv_data->controller->dma_rx);
 134                 dmaengine_terminate_async(drv_data->controller->dma_tx);
 135
 136                 pxa2xx_spi_dma_transfer_complete(drv_data, true);
 137                 return IRQ_HANDLED;
 138         }
 139
 140         return IRQ_NONE;
 141 }
 142
 143 int pxa2xx_spi_dma_prepare(struct driver_data *drv_data,
 144                            struct spi_transfer *xfer)
 145 {
 146         struct dma_async_tx_descriptor *tx_desc, *rx_desc;
 147         int err;
 148
 149         tx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_MEM_TO_DEV, xfer);
 150         if (!tx_desc) {
 151                 dev_err(&drv_data->pdev->dev,
 152                         "failed to get DMA TX descriptor\n");
 153                 err = -EBUSY;
 154                 goto err_tx;
 155         }
 156
 157         rx_desc = pxa2xx_spi_dma_prepare_one(drv_data, DMA_DEV_TO_MEM, xfer);
 158         if (!rx_desc) {
 159                 dev_err(&drv_data->pdev->dev,
 160                         "failed to get DMA RX descriptor\n");
 161                 err = -EBUSY;
 162                 goto err_rx;
 163         }
 164
 165         /* We are ready when RX completes */
 166         rx_desc->callback = pxa2xx_spi_dma_callback;
 167         rx_desc->callback_param = drv_data;
 168
 169         dmaengine_submit(rx_desc);
 170         dmaengine_submit(tx_desc);
 171         return 0;
 172
 173 err_rx:
 174         dmaengine_terminate_async(drv_data->controller->dma_tx);
 175 err_tx:
 176         return err;
 177 }
 178
 179 void pxa2xx_spi_dma_start(struct driver_data *drv_data)
 180 {
 181         dma_async_issue_pending(drv_data->controller->dma_rx);
 182         dma_async_issue_pending(drv_data->controller->dma_tx);
 183
 184         atomic_set(&drv_data->dma_running, 1);
 185 }
 186
 187 void pxa2xx_spi_dma_stop(struct driver_data *drv_data)
 188 {
 189         atomic_set(&drv_data->dma_running, 0);
 190         dmaengine_terminate_sync(drv_data->controller->dma_rx);
 191         dmaengine_terminate_sync(drv_data->controller->dma_tx);
 192 }
 193
 194 int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
 195 {
 196         struct pxa2xx_spi_controller *pdata = drv_data->controller_info;
 197         struct device *dev = &drv_data->pdev->dev;
 198         struct spi_controller *controller = drv_data->controller;
 199         dma_cap_mask_t mask;
 200
 201         dma_cap_zero(mask);
 202         dma_cap_set(DMA_SLAVE, mask);
 203
 204         controller->dma_tx = dma_request_slave_channel_compat(mask,
 205                                 pdata->dma_filter, pdata->tx_param, dev, "tx");
 206         if (!controller->dma_tx)
 207                 return -ENODEV;
 208
 209         controller->dma_rx = dma_request_slave_channel_compat(mask,
 210                                 pdata->dma_filter, pdata->rx_param, dev, "rx");
 211         if (!controller->dma_rx) {
 212                 dma_release_channel(controller->dma_tx);
 213                 controller->dma_tx = NULL;
 214                 return -ENODEV;
 215         }
 216
 217         return 0;
 218 }
 219
 220 void pxa2xx_spi_dma_release(struct driver_data *drv_data)
 221 {
 222         struct spi_controller *controller = drv_data->controller;
 223
 224         if (controller->dma_rx) {
 225                 dmaengine_terminate_sync(controller->dma_rx);
 226                 dma_release_channel(controller->dma_rx);
 227                 controller->dma_rx = NULL;
 228         }
 229         if (controller->dma_tx) {
 230                 dmaengine_terminate_sync(controller->dma_tx);
 231                 dma_release_channel(controller->dma_tx);
 232                 controller->dma_tx = NULL;
 233         }
 234 }
 235
 236 int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
 237                                            struct spi_device *spi,
 238                                            u8 bits_per_word, u32 *burst_code,
 239                                            u32 *threshold)
 240 {
 241         struct pxa2xx_spi_chip *chip_info = spi->controller_data;
 242
 243         /*
 244          * If the DMA burst size is given in chip_info we use that,
 245          * otherwise we use the default. Also we use the default FIFO
 246          * thresholds for now.
 247          */
 248         *burst_code = chip_info ? chip_info->dma_burst_size : 1;
 249         *threshold = SSCR1_RxTresh(RX_THRESH_DFLT)
 250                    | SSCR1_TxTresh(TX_THRESH_DFLT);
 251
 252         return 0;
 253 }