]> Git Repo - linux.git/blob - drivers/net/ethernet/freescale/fec.h
Merge tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
[linux.git] / drivers / net / ethernet / freescale / fec.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /****************************************************************************/
3
4 /*
5  *      fec.h  --  Fast Ethernet Controller for Motorola ColdFire SoC
6  *                 processors.
7  *
8  *      (C) Copyright 2000-2005, Greg Ungerer ([email protected])
9  *      (C) Copyright 2000-2001, Lineo (www.lineo.com)
10  */
11
12 /****************************************************************************/
13 #ifndef FEC_H
14 #define FEC_H
15 /****************************************************************************/
16
17 #include <linux/clocksource.h>
18 #include <linux/net_tstamp.h>
19 #include <linux/ptp_clock_kernel.h>
20 #include <linux/timecounter.h>
21
22 #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
23     defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \
24     defined(CONFIG_ARM64) || defined(CONFIG_COMPILE_TEST)
25 /*
26  *      Just figures, Motorola would have to change the offsets for
27  *      registers in the same peripheral device on different models
28  *      of the ColdFire!
29  */
30 #define FEC_IEVENT              0x004 /* Interrupt event reg */
31 #define FEC_IMASK               0x008 /* Interrupt mask reg */
32 #define FEC_R_DES_ACTIVE_0      0x010 /* Receive descriptor reg */
33 #define FEC_X_DES_ACTIVE_0      0x014 /* Transmit descriptor reg */
34 #define FEC_ECNTRL              0x024 /* Ethernet control reg */
35 #define FEC_MII_DATA            0x040 /* MII manage frame reg */
36 #define FEC_MII_SPEED           0x044 /* MII speed control reg */
37 #define FEC_MIB_CTRLSTAT        0x064 /* MIB control/status reg */
38 #define FEC_R_CNTRL             0x084 /* Receive control reg */
39 #define FEC_X_CNTRL             0x0c4 /* Transmit Control reg */
40 #define FEC_ADDR_LOW            0x0e4 /* Low 32bits MAC address */
41 #define FEC_ADDR_HIGH           0x0e8 /* High 16bits MAC address */
42 #define FEC_OPD                 0x0ec /* Opcode + Pause duration */
43 #define FEC_TXIC0               0x0f0 /* Tx Interrupt Coalescing for ring 0 */
44 #define FEC_TXIC1               0x0f4 /* Tx Interrupt Coalescing for ring 1 */
45 #define FEC_TXIC2               0x0f8 /* Tx Interrupt Coalescing for ring 2 */
46 #define FEC_RXIC0               0x100 /* Rx Interrupt Coalescing for ring 0 */
47 #define FEC_RXIC1               0x104 /* Rx Interrupt Coalescing for ring 1 */
48 #define FEC_RXIC2               0x108 /* Rx Interrupt Coalescing for ring 2 */
49 #define FEC_HASH_TABLE_HIGH     0x118 /* High 32bits hash table */
50 #define FEC_HASH_TABLE_LOW      0x11c /* Low 32bits hash table */
51 #define FEC_GRP_HASH_TABLE_HIGH 0x120 /* High 32bits hash table */
52 #define FEC_GRP_HASH_TABLE_LOW  0x124 /* Low 32bits hash table */
53 #define FEC_X_WMRK              0x144 /* FIFO transmit water mark */
54 #define FEC_R_BOUND             0x14c /* FIFO receive bound reg */
55 #define FEC_R_FSTART            0x150 /* FIFO receive start reg */
56 #define FEC_R_DES_START_1       0x160 /* Receive descriptor ring 1 */
57 #define FEC_X_DES_START_1       0x164 /* Transmit descriptor ring 1 */
58 #define FEC_R_BUFF_SIZE_1       0x168 /* Maximum receive buff ring1 size */
59 #define FEC_R_DES_START_2       0x16c /* Receive descriptor ring 2 */
60 #define FEC_X_DES_START_2       0x170 /* Transmit descriptor ring 2 */
61 #define FEC_R_BUFF_SIZE_2       0x174 /* Maximum receive buff ring2 size */
62 #define FEC_R_DES_START_0       0x180 /* Receive descriptor ring */
63 #define FEC_X_DES_START_0       0x184 /* Transmit descriptor ring */
64 #define FEC_R_BUFF_SIZE_0       0x188 /* Maximum receive buff size */
65 #define FEC_R_FIFO_RSFL         0x190 /* Receive FIFO section full threshold */
66 #define FEC_R_FIFO_RSEM         0x194 /* Receive FIFO section empty threshold */
67 #define FEC_R_FIFO_RAEM         0x198 /* Receive FIFO almost empty threshold */
68 #define FEC_R_FIFO_RAFL         0x19c /* Receive FIFO almost full threshold */
69 #define FEC_FTRL                0x1b0 /* Frame truncation receive length*/
70 #define FEC_RACC                0x1c4 /* Receive Accelerator function */
71 #define FEC_RCMR_1              0x1c8 /* Receive classification match ring 1 */
72 #define FEC_RCMR_2              0x1cc /* Receive classification match ring 2 */
73 #define FEC_DMA_CFG_1           0x1d8 /* DMA class configuration for ring 1 */
74 #define FEC_DMA_CFG_2           0x1dc /* DMA class Configuration for ring 2 */
75 #define FEC_R_DES_ACTIVE_1      0x1e0 /* Rx descriptor active for ring 1 */
76 #define FEC_X_DES_ACTIVE_1      0x1e4 /* Tx descriptor active for ring 1 */
77 #define FEC_R_DES_ACTIVE_2      0x1e8 /* Rx descriptor active for ring 2 */
78 #define FEC_X_DES_ACTIVE_2      0x1ec /* Tx descriptor active for ring 2 */
79 #define FEC_QOS_SCHEME          0x1f0 /* Set multi queues Qos scheme */
80 #define FEC_LPI_SLEEP           0x1f4 /* Set IEEE802.3az LPI Sleep Ts time */
81 #define FEC_LPI_WAKE            0x1f8 /* Set IEEE802.3az LPI Wake Tw time */
82 #define FEC_MIIGSK_CFGR         0x300 /* MIIGSK Configuration reg */
83 #define FEC_MIIGSK_ENR          0x308 /* MIIGSK Enable reg */
84
85 #define BM_MIIGSK_CFGR_MII              0x00
86 #define BM_MIIGSK_CFGR_RMII             0x01
87 #define BM_MIIGSK_CFGR_FRCONT_10M       0x40
88
89 #define RMON_T_DROP             0x200 /* Count of frames not cntd correctly */
90 #define RMON_T_PACKETS          0x204 /* RMON TX packet count */
91 #define RMON_T_BC_PKT           0x208 /* RMON TX broadcast pkts */
92 #define RMON_T_MC_PKT           0x20c /* RMON TX multicast pkts */
93 #define RMON_T_CRC_ALIGN        0x210 /* RMON TX pkts with CRC align err */
94 #define RMON_T_UNDERSIZE        0x214 /* RMON TX pkts < 64 bytes, good CRC */
95 #define RMON_T_OVERSIZE         0x218 /* RMON TX pkts > MAX_FL bytes good CRC */
96 #define RMON_T_FRAG             0x21c /* RMON TX pkts < 64 bytes, bad CRC */
97 #define RMON_T_JAB              0x220 /* RMON TX pkts > MAX_FL bytes, bad CRC */
98 #define RMON_T_COL              0x224 /* RMON TX collision count */
99 #define RMON_T_P64              0x228 /* RMON TX 64 byte pkts */
100 #define RMON_T_P65TO127         0x22c /* RMON TX 65 to 127 byte pkts */
101 #define RMON_T_P128TO255        0x230 /* RMON TX 128 to 255 byte pkts */
102 #define RMON_T_P256TO511        0x234 /* RMON TX 256 to 511 byte pkts */
103 #define RMON_T_P512TO1023       0x238 /* RMON TX 512 to 1023 byte pkts */
104 #define RMON_T_P1024TO2047      0x23c /* RMON TX 1024 to 2047 byte pkts */
105 #define RMON_T_P_GTE2048        0x240 /* RMON TX pkts > 2048 bytes */
106 #define RMON_T_OCTETS           0x244 /* RMON TX octets */
107 #define IEEE_T_DROP             0x248 /* Count of frames not counted crtly */
108 #define IEEE_T_FRAME_OK         0x24c /* Frames tx'd OK */
109 #define IEEE_T_1COL             0x250 /* Frames tx'd with single collision */
110 #define IEEE_T_MCOL             0x254 /* Frames tx'd with multiple collision */
111 #define IEEE_T_DEF              0x258 /* Frames tx'd after deferral delay */
112 #define IEEE_T_LCOL             0x25c /* Frames tx'd with late collision */
113 #define IEEE_T_EXCOL            0x260 /* Frames tx'd with excesv collisions */
114 #define IEEE_T_MACERR           0x264 /* Frames tx'd with TX FIFO underrun */
115 #define IEEE_T_CSERR            0x268 /* Frames tx'd with carrier sense err */
116 #define IEEE_T_SQE              0x26c /* Frames tx'd with SQE err */
117 #define IEEE_T_FDXFC            0x270 /* Flow control pause frames tx'd */
118 #define IEEE_T_OCTETS_OK        0x274 /* Octet count for frames tx'd w/o err */
119 #define RMON_R_PACKETS          0x284 /* RMON RX packet count */
120 #define RMON_R_BC_PKT           0x288 /* RMON RX broadcast pkts */
121 #define RMON_R_MC_PKT           0x28c /* RMON RX multicast pkts */
122 #define RMON_R_CRC_ALIGN        0x290 /* RMON RX pkts with CRC alignment err */
123 #define RMON_R_UNDERSIZE        0x294 /* RMON RX pkts < 64 bytes, good CRC */
124 #define RMON_R_OVERSIZE         0x298 /* RMON RX pkts > MAX_FL bytes good CRC */
125 #define RMON_R_FRAG             0x29c /* RMON RX pkts < 64 bytes, bad CRC */
126 #define RMON_R_JAB              0x2a0 /* RMON RX pkts > MAX_FL bytes, bad CRC */
127 #define RMON_R_RESVD_O          0x2a4 /* Reserved */
128 #define RMON_R_P64              0x2a8 /* RMON RX 64 byte pkts */
129 #define RMON_R_P65TO127         0x2ac /* RMON RX 65 to 127 byte pkts */
130 #define RMON_R_P128TO255        0x2b0 /* RMON RX 128 to 255 byte pkts */
131 #define RMON_R_P256TO511        0x2b4 /* RMON RX 256 to 511 byte pkts */
132 #define RMON_R_P512TO1023       0x2b8 /* RMON RX 512 to 1023 byte pkts */
133 #define RMON_R_P1024TO2047      0x2bc /* RMON RX 1024 to 2047 byte pkts */
134 #define RMON_R_P_GTE2048        0x2c0 /* RMON RX pkts > 2048 bytes */
135 #define RMON_R_OCTETS           0x2c4 /* RMON RX octets */
136 #define IEEE_R_DROP             0x2c8 /* Count frames not counted correctly */
137 #define IEEE_R_FRAME_OK         0x2cc /* Frames rx'd OK */
138 #define IEEE_R_CRC              0x2d0 /* Frames rx'd with CRC err */
139 #define IEEE_R_ALIGN            0x2d4 /* Frames rx'd with alignment err */
140 #define IEEE_R_MACERR           0x2d8 /* Receive FIFO overflow count */
141 #define IEEE_R_FDXFC            0x2dc /* Flow control pause frames rx'd */
142 #define IEEE_R_OCTETS_OK        0x2e0 /* Octet cnt for frames rx'd w/o err */
143
144 #else
145
146 #define FEC_ECNTRL              0x000 /* Ethernet control reg */
147 #define FEC_IEVENT              0x004 /* Interrupt even reg */
148 #define FEC_IMASK               0x008 /* Interrupt mask reg */
149 #define FEC_IVEC                0x00c /* Interrupt vec status reg */
150 #define FEC_R_DES_ACTIVE_0      0x010 /* Receive descriptor reg */
151 #define FEC_R_DES_ACTIVE_1      FEC_R_DES_ACTIVE_0
152 #define FEC_R_DES_ACTIVE_2      FEC_R_DES_ACTIVE_0
153 #define FEC_X_DES_ACTIVE_0      0x014 /* Transmit descriptor reg */
154 #define FEC_X_DES_ACTIVE_1      FEC_X_DES_ACTIVE_0
155 #define FEC_X_DES_ACTIVE_2      FEC_X_DES_ACTIVE_0
156 #define FEC_MII_DATA            0x040 /* MII manage frame reg */
157 #define FEC_MII_SPEED           0x044 /* MII speed control reg */
158 #define FEC_R_BOUND             0x08c /* FIFO receive bound reg */
159 #define FEC_R_FSTART            0x090 /* FIFO receive start reg */
160 #define FEC_X_WMRK              0x0a4 /* FIFO transmit water mark */
161 #define FEC_X_FSTART            0x0ac /* FIFO transmit start reg */
162 #define FEC_R_CNTRL             0x104 /* Receive control reg */
163 #define FEC_MAX_FRM_LEN         0x108 /* Maximum frame length reg */
164 #define FEC_X_CNTRL             0x144 /* Transmit Control reg */
165 #define FEC_ADDR_LOW            0x3c0 /* Low 32bits MAC address */
166 #define FEC_ADDR_HIGH           0x3c4 /* High 16bits MAC address */
167 #define FEC_GRP_HASH_TABLE_HIGH 0x3c8 /* High 32bits hash table */
168 #define FEC_GRP_HASH_TABLE_LOW  0x3cc /* Low 32bits hash table */
169 #define FEC_R_DES_START_0       0x3d0 /* Receive descriptor ring */
170 #define FEC_R_DES_START_1       FEC_R_DES_START_0
171 #define FEC_R_DES_START_2       FEC_R_DES_START_0
172 #define FEC_X_DES_START_0       0x3d4 /* Transmit descriptor ring */
173 #define FEC_X_DES_START_1       FEC_X_DES_START_0
174 #define FEC_X_DES_START_2       FEC_X_DES_START_0
175 #define FEC_R_BUFF_SIZE_0       0x3d8 /* Maximum receive buff size */
176 #define FEC_R_BUFF_SIZE_1       FEC_R_BUFF_SIZE_0
177 #define FEC_R_BUFF_SIZE_2       FEC_R_BUFF_SIZE_0
178 #define FEC_FIFO_RAM            0x400 /* FIFO RAM buffer */
179 /* Not existed in real chip
180  * Just for pass build.
181  */
182 #define FEC_RCMR_1              0xfff
183 #define FEC_RCMR_2              0xfff
184 #define FEC_DMA_CFG_1           0xfff
185 #define FEC_DMA_CFG_2           0xfff
186 #define FEC_TXIC0               0xfff
187 #define FEC_TXIC1               0xfff
188 #define FEC_TXIC2               0xfff
189 #define FEC_RXIC0               0xfff
190 #define FEC_RXIC1               0xfff
191 #define FEC_RXIC2               0xfff
192 #define FEC_LPI_SLEEP           0xfff
193 #define FEC_LPI_WAKE            0xfff
194 #endif /* CONFIG_M5272 */
195
196
197 /*
198  *      Define the buffer descriptor structure.
199  *
200  *      Evidently, ARM SoCs have the FEC block generated in a
201  *      little endian mode so adjust endianness accordingly.
202  */
203 #if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
204 #define fec32_to_cpu le32_to_cpu
205 #define fec16_to_cpu le16_to_cpu
206 #define cpu_to_fec32 cpu_to_le32
207 #define cpu_to_fec16 cpu_to_le16
208 #define __fec32 __le32
209 #define __fec16 __le16
210
211 struct bufdesc {
212         __fec16 cbd_datlen;     /* Data length */
213         __fec16 cbd_sc;         /* Control and status info */
214         __fec32 cbd_bufaddr;    /* Buffer address */
215 };
216 #else
217 #define fec32_to_cpu be32_to_cpu
218 #define fec16_to_cpu be16_to_cpu
219 #define cpu_to_fec32 cpu_to_be32
220 #define cpu_to_fec16 cpu_to_be16
221 #define __fec32 __be32
222 #define __fec16 __be16
223
224 struct bufdesc {
225         __fec16 cbd_sc;         /* Control and status info */
226         __fec16 cbd_datlen;     /* Data length */
227         __fec32 cbd_bufaddr;    /* Buffer address */
228 };
229 #endif
230
231 struct bufdesc_ex {
232         struct bufdesc desc;
233         __fec32 cbd_esc;
234         __fec32 cbd_prot;
235         __fec32 cbd_bdu;
236         __fec32 ts;
237         __fec16 res0[4];
238 };
239
240 /*
241  *      The following definitions courtesy of commproc.h, which where
242  *      Copyright (c) 1997 Dan Malek ([email protected]).
243  */
244 #define BD_SC_EMPTY     ((ushort)0x8000)        /* Receive is empty */
245 #define BD_SC_READY     ((ushort)0x8000)        /* Transmit is ready */
246 #define BD_SC_WRAP      ((ushort)0x2000)        /* Last buffer descriptor */
247 #define BD_SC_INTRPT    ((ushort)0x1000)        /* Interrupt on change */
248 #define BD_SC_CM        ((ushort)0x0200)        /* Continuous mode */
249 #define BD_SC_ID        ((ushort)0x0100)        /* Rec'd too many idles */
250 #define BD_SC_P         ((ushort)0x0100)        /* xmt preamble */
251 #define BD_SC_BR        ((ushort)0x0020)        /* Break received */
252 #define BD_SC_FR        ((ushort)0x0010)        /* Framing error */
253 #define BD_SC_PR        ((ushort)0x0008)        /* Parity error */
254 #define BD_SC_OV        ((ushort)0x0002)        /* Overrun */
255 #define BD_SC_CD        ((ushort)0x0001)        /* ?? */
256
257 /* Buffer descriptor control/status used by Ethernet receive.
258  */
259 #define BD_ENET_RX_EMPTY        ((ushort)0x8000)
260 #define BD_ENET_RX_WRAP         ((ushort)0x2000)
261 #define BD_ENET_RX_INTR         ((ushort)0x1000)
262 #define BD_ENET_RX_LAST         ((ushort)0x0800)
263 #define BD_ENET_RX_FIRST        ((ushort)0x0400)
264 #define BD_ENET_RX_MISS         ((ushort)0x0100)
265 #define BD_ENET_RX_LG           ((ushort)0x0020)
266 #define BD_ENET_RX_NO           ((ushort)0x0010)
267 #define BD_ENET_RX_SH           ((ushort)0x0008)
268 #define BD_ENET_RX_CR           ((ushort)0x0004)
269 #define BD_ENET_RX_OV           ((ushort)0x0002)
270 #define BD_ENET_RX_CL           ((ushort)0x0001)
271 #define BD_ENET_RX_STATS        ((ushort)0x013f)        /* All status bits */
272
273 /* Enhanced buffer descriptor control/status used by Ethernet receive */
274 #define BD_ENET_RX_VLAN         0x00000004
275
276 /* Buffer descriptor control/status used by Ethernet transmit.
277  */
278 #define BD_ENET_TX_READY        ((ushort)0x8000)
279 #define BD_ENET_TX_PAD          ((ushort)0x4000)
280 #define BD_ENET_TX_WRAP         ((ushort)0x2000)
281 #define BD_ENET_TX_INTR         ((ushort)0x1000)
282 #define BD_ENET_TX_LAST         ((ushort)0x0800)
283 #define BD_ENET_TX_TC           ((ushort)0x0400)
284 #define BD_ENET_TX_DEF          ((ushort)0x0200)
285 #define BD_ENET_TX_HB           ((ushort)0x0100)
286 #define BD_ENET_TX_LC           ((ushort)0x0080)
287 #define BD_ENET_TX_RL           ((ushort)0x0040)
288 #define BD_ENET_TX_RCMASK       ((ushort)0x003c)
289 #define BD_ENET_TX_UN           ((ushort)0x0002)
290 #define BD_ENET_TX_CSL          ((ushort)0x0001)
291 #define BD_ENET_TX_STATS        ((ushort)0x0fff)        /* All status bits */
292
293 /* enhanced buffer descriptor control/status used by Ethernet transmit */
294 #define BD_ENET_TX_INT          0x40000000
295 #define BD_ENET_TX_TS           0x20000000
296 #define BD_ENET_TX_PINS         0x10000000
297 #define BD_ENET_TX_IINS         0x08000000
298
299
300 /* This device has up to three irqs on some platforms */
301 #define FEC_IRQ_NUM             3
302
303 /* Maximum number of queues supported
304  * ENET with AVB IP can support up to 3 independent tx queues and rx queues.
305  * User can point the queue number that is less than or equal to 3.
306  */
307 #define FEC_ENET_MAX_TX_QS      3
308 #define FEC_ENET_MAX_RX_QS      3
309
310 #define FEC_R_DES_START(X)      (((X) == 1) ? FEC_R_DES_START_1 : \
311                                 (((X) == 2) ? \
312                                         FEC_R_DES_START_2 : FEC_R_DES_START_0))
313 #define FEC_X_DES_START(X)      (((X) == 1) ? FEC_X_DES_START_1 : \
314                                 (((X) == 2) ? \
315                                         FEC_X_DES_START_2 : FEC_X_DES_START_0))
316 #define FEC_R_BUFF_SIZE(X)      (((X) == 1) ? FEC_R_BUFF_SIZE_1 : \
317                                 (((X) == 2) ? \
318                                         FEC_R_BUFF_SIZE_2 : FEC_R_BUFF_SIZE_0))
319
320 #define FEC_DMA_CFG(X)          (((X) == 2) ? FEC_DMA_CFG_2 : FEC_DMA_CFG_1)
321
322 #define DMA_CLASS_EN            (1 << 16)
323 #define FEC_RCMR(X)             (((X) == 2) ? FEC_RCMR_2 : FEC_RCMR_1)
324 #define IDLE_SLOPE_MASK         0xffff
325 #define IDLE_SLOPE_1            0x200 /* BW fraction: 0.5 */
326 #define IDLE_SLOPE_2            0x200 /* BW fraction: 0.5 */
327 #define IDLE_SLOPE(X)           (((X) == 1) ?                           \
328                                 (IDLE_SLOPE_1 & IDLE_SLOPE_MASK) :      \
329                                 (IDLE_SLOPE_2 & IDLE_SLOPE_MASK))
330 #define RCMR_MATCHEN            (0x1 << 16)
331 #define RCMR_CMP_CFG(v, n)      (((v) & 0x7) <<  (n << 2))
332 #define RCMR_CMP_1              (RCMR_CMP_CFG(0, 0) | RCMR_CMP_CFG(1, 1) | \
333                                 RCMR_CMP_CFG(2, 2) | RCMR_CMP_CFG(3, 3))
334 #define RCMR_CMP_2              (RCMR_CMP_CFG(4, 0) | RCMR_CMP_CFG(5, 1) | \
335                                 RCMR_CMP_CFG(6, 2) | RCMR_CMP_CFG(7, 3))
336 #define RCMR_CMP(X)             (((X) == 1) ? RCMR_CMP_1 : RCMR_CMP_2)
337 #define FEC_TX_BD_FTYPE(X)      (((X) & 0xf) << 20)
338
339 /* The number of Tx and Rx buffers.  These are allocated from the page
340  * pool.  The code may assume these are power of two, so it it best
341  * to keep them that size.
342  * We don't need to allocate pages for the transmitter.  We just use
343  * the skbuffer directly.
344  */
345
346 #define FEC_ENET_RX_PAGES       256
347 #define FEC_ENET_RX_FRSIZE      2048
348 #define FEC_ENET_RX_FRPPG       (PAGE_SIZE / FEC_ENET_RX_FRSIZE)
349 #define RX_RING_SIZE            (FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
350 #define FEC_ENET_TX_FRSIZE      2048
351 #define FEC_ENET_TX_FRPPG       (PAGE_SIZE / FEC_ENET_TX_FRSIZE)
352 #define TX_RING_SIZE            512     /* Must be power of two */
353 #define TX_RING_MOD_MASK        511     /*   for this to work */
354
355 #define BD_ENET_RX_INT          0x00800000
356 #define BD_ENET_RX_PTP          ((ushort)0x0400)
357 #define BD_ENET_RX_ICE          0x00000020
358 #define BD_ENET_RX_PCR          0x00000010
359 #define FLAG_RX_CSUM_ENABLED    (BD_ENET_RX_ICE | BD_ENET_RX_PCR)
360 #define FLAG_RX_CSUM_ERROR      (BD_ENET_RX_ICE | BD_ENET_RX_PCR)
361
362 /* Interrupt events/masks. */
363 #define FEC_ENET_HBERR  ((uint)0x80000000)      /* Heartbeat error */
364 #define FEC_ENET_BABR   ((uint)0x40000000)      /* Babbling receiver */
365 #define FEC_ENET_BABT   ((uint)0x20000000)      /* Babbling transmitter */
366 #define FEC_ENET_GRA    ((uint)0x10000000)      /* Graceful stop complete */
367 #define FEC_ENET_TXF_0  ((uint)0x08000000)      /* Full frame transmitted */
368 #define FEC_ENET_TXF_1  ((uint)0x00000008)      /* Full frame transmitted */
369 #define FEC_ENET_TXF_2  ((uint)0x00000080)      /* Full frame transmitted */
370 #define FEC_ENET_TXB    ((uint)0x04000000)      /* A buffer was transmitted */
371 #define FEC_ENET_RXF_0  ((uint)0x02000000)      /* Full frame received */
372 #define FEC_ENET_RXF_1  ((uint)0x00000002)      /* Full frame received */
373 #define FEC_ENET_RXF_2  ((uint)0x00000020)      /* Full frame received */
374 #define FEC_ENET_RXB    ((uint)0x01000000)      /* A buffer was received */
375 #define FEC_ENET_MII    ((uint)0x00800000)      /* MII interrupt */
376 #define FEC_ENET_EBERR  ((uint)0x00400000)      /* SDMA bus error */
377 #define FEC_ENET_WAKEUP ((uint)0x00020000)      /* Wakeup request */
378 #define FEC_ENET_TXF    (FEC_ENET_TXF_0 | FEC_ENET_TXF_1 | FEC_ENET_TXF_2)
379 #define FEC_ENET_RXF    (FEC_ENET_RXF_0 | FEC_ENET_RXF_1 | FEC_ENET_RXF_2)
380 #define FEC_ENET_RXF_GET(X)     (((X) == 0) ? FEC_ENET_RXF_0 :  \
381                                 (((X) == 1) ? FEC_ENET_RXF_1 :  \
382                                 FEC_ENET_RXF_2))
383 #define FEC_ENET_TS_AVAIL       ((uint)0x00010000)
384 #define FEC_ENET_TS_TIMER       ((uint)0x00008000)
385
386 #define FEC_DEFAULT_IMASK (FEC_ENET_TXF | FEC_ENET_RXF)
387 #define FEC_RX_DISABLED_IMASK (FEC_DEFAULT_IMASK & (~FEC_ENET_RXF))
388
389 #define FEC_ENET_TXC_DLY        ((uint)0x00010000)
390 #define FEC_ENET_RXC_DLY        ((uint)0x00020000)
391
392 /* ENET interrupt coalescing macro define */
393 #define FEC_ITR_CLK_SEL         (0x1 << 30)
394 #define FEC_ITR_EN              (0x1 << 31)
395 #define FEC_ITR_ICFT(X)         (((X) & 0xff) << 20)
396 #define FEC_ITR_ICTT(X)         ((X) & 0xffff)
397 #define FEC_ITR_ICFT_DEFAULT    200  /* Set 200 frame count threshold */
398 #define FEC_ITR_ICTT_DEFAULT    1000 /* Set 1000us timer threshold */
399
400 #define FEC_VLAN_TAG_LEN        0x04
401 #define FEC_ETHTYPE_LEN         0x02
402
403 /* Controller is ENET-MAC */
404 #define FEC_QUIRK_ENET_MAC              (1 << 0)
405 /* Controller needs driver to swap frame */
406 #define FEC_QUIRK_SWAP_FRAME            (1 << 1)
407 /* Controller uses gasket */
408 #define FEC_QUIRK_USE_GASKET            (1 << 2)
409 /* Controller has GBIT support */
410 #define FEC_QUIRK_HAS_GBIT              (1 << 3)
411 /* Controller has extend desc buffer */
412 #define FEC_QUIRK_HAS_BUFDESC_EX        (1 << 4)
413 /* Controller has hardware checksum support */
414 #define FEC_QUIRK_HAS_CSUM              (1 << 5)
415 /* Controller has hardware vlan support */
416 #define FEC_QUIRK_HAS_VLAN              (1 << 6)
417 /* ENET IP errata ERR006358
418  *
419  * If the ready bit in the transmit buffer descriptor (TxBD[R]) is previously
420  * detected as not set during a prior frame transmission, then the
421  * ENET_TDAR[TDAR] bit is cleared at a later time, even if additional TxBDs
422  * were added to the ring and the ENET_TDAR[TDAR] bit is set. This results in
423  * frames not being transmitted until there is a 0-to-1 transition on
424  * ENET_TDAR[TDAR].
425  */
426 #define FEC_QUIRK_ERR006358             (1 << 7)
427 /* ENET IP hw AVB
428  *
429  * i.MX6SX ENET IP add Audio Video Bridging (AVB) feature support.
430  * - Two class indicators on receive with configurable priority
431  * - Two class indicators and line speed timer on transmit allowing
432  *   implementation class credit based shapers externally
433  * - Additional DMA registers provisioned to allow managing up to 3
434  *   independent rings
435  */
436 #define FEC_QUIRK_HAS_AVB               (1 << 8)
437 /* There is a TDAR race condition for mutliQ when the software sets TDAR
438  * and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles).
439  * This will cause the udma_tx and udma_tx_arbiter state machines to hang.
440  * The issue exist at i.MX6SX enet IP.
441  */
442 #define FEC_QUIRK_ERR007885             (1 << 9)
443 /* ENET Block Guide/ Chapter for the iMX6SX (PELE) address one issue:
444  * After set ENET_ATCR[Capture], there need some time cycles before the counter
445  * value is capture in the register clock domain.
446  * The wait-time-cycles is at least 6 clock cycles of the slower clock between
447  * the register clock and the 1588 clock. The 1588 ts_clk is fixed to 25Mhz,
448  * register clock is 66Mhz, so the wait-time-cycles must be greater than 240ns
449  * (40ns * 6).
450  */
451 #define FEC_QUIRK_BUG_CAPTURE           (1 << 10)
452 /* Controller has only one MDIO bus */
453 #define FEC_QUIRK_SINGLE_MDIO           (1 << 11)
454 /* Controller supports RACC register */
455 #define FEC_QUIRK_HAS_RACC              (1 << 12)
456 /* Controller supports interrupt coalesc */
457 #define FEC_QUIRK_HAS_COALESCE          (1 << 13)
458 /* Interrupt doesn't wake CPU from deep idle */
459 #define FEC_QUIRK_ERR006687             (1 << 14)
460 /* The MIB counters should be cleared and enabled during
461  * initialisation.
462  */
463 #define FEC_QUIRK_MIB_CLEAR             (1 << 15)
464 /* Only i.MX25/i.MX27/i.MX28 controller supports FRBR,FRSR registers,
465  * those FIFO receive registers are resolved in other platforms.
466  */
467 #define FEC_QUIRK_HAS_FRREG             (1 << 16)
468
469 /* Some FEC hardware blocks need the MMFR cleared at setup time to avoid
470  * the generation of an MII event. This must be avoided in the older
471  * FEC blocks where it will stop MII events being generated.
472  */
473 #define FEC_QUIRK_CLEAR_SETUP_MII       (1 << 17)
474
475 /* Some link partners do not tolerate the momentary reset of the REF_CLK
476  * frequency when the RNCTL register is cleared by hardware reset.
477  */
478 #define FEC_QUIRK_NO_HARD_RESET         (1 << 18)
479
480 /* i.MX6SX ENET IP supports multiple queues (3 queues), use this quirk to
481  * represents this ENET IP.
482  */
483 #define FEC_QUIRK_HAS_MULTI_QUEUES      (1 << 19)
484
485 /* i.MX8MQ ENET IP version add new feature to support IEEE 802.3az EEE
486  * standard. For the transmission, MAC supply two user registers to set
487  * Sleep (TS) and Wake (TW) time.
488  */
489 #define FEC_QUIRK_HAS_EEE               (1 << 20)
490
491 /* i.MX8QM ENET IP version add new feture to generate delayed TXC/RXC
492  * as an alternative option to make sure it works well with various PHYs.
493  * For the implementation of delayed clock, ENET takes synchronized 250MHz
494  * clocks to generate 2ns delay.
495  */
496 #define FEC_QUIRK_DELAYED_CLKS_SUPPORT  (1 << 21)
497
498 /* i.MX8MQ SoC integration mix wakeup interrupt signal into "int2" interrupt line. */
499 #define FEC_QUIRK_WAKEUP_FROM_INT2      (1 << 22)
500
501 struct bufdesc_prop {
502         int qid;
503         /* Address of Rx and Tx buffers */
504         struct bufdesc  *base;
505         struct bufdesc  *last;
506         struct bufdesc  *cur;
507         void __iomem    *reg_desc_active;
508         dma_addr_t      dma;
509         unsigned short ring_size;
510         unsigned char dsize;
511         unsigned char dsize_log2;
512 };
513
514 struct fec_enet_priv_tx_q {
515         struct bufdesc_prop bd;
516         unsigned char *tx_bounce[TX_RING_SIZE];
517         struct  sk_buff *tx_skbuff[TX_RING_SIZE];
518
519         unsigned short tx_stop_threshold;
520         unsigned short tx_wake_threshold;
521
522         struct bufdesc  *dirty_tx;
523         char *tso_hdrs;
524         dma_addr_t tso_hdrs_dma;
525 };
526
527 struct fec_enet_priv_rx_q {
528         struct bufdesc_prop bd;
529         struct  sk_buff *rx_skbuff[RX_RING_SIZE];
530 };
531
532 struct fec_stop_mode_gpr {
533         struct regmap *gpr;
534         u8 reg;
535         u8 bit;
536 };
537
538 /* The FEC buffer descriptors track the ring buffers.  The rx_bd_base and
539  * tx_bd_base always point to the base of the buffer descriptors.  The
540  * cur_rx and cur_tx point to the currently available buffer.
541  * The dirty_tx tracks the current buffer that is being sent by the
542  * controller.  The cur_tx and dirty_tx are equal under both completely
543  * empty and completely full conditions.  The empty/ready indicator in
544  * the buffer descriptor determines the actual condition.
545  */
546 struct fec_enet_private {
547         /* Hardware registers of the FEC device */
548         void __iomem *hwp;
549
550         struct net_device *netdev;
551
552         struct clk *clk_ipg;
553         struct clk *clk_ahb;
554         struct clk *clk_ref;
555         struct clk *clk_enet_out;
556         struct clk *clk_ptp;
557         struct clk *clk_2x_txclk;
558
559         bool ptp_clk_on;
560         struct mutex ptp_clk_mutex;
561         unsigned int num_tx_queues;
562         unsigned int num_rx_queues;
563
564         /* The saved address of a sent-in-place packet/buffer, for skfree(). */
565         struct fec_enet_priv_tx_q *tx_queue[FEC_ENET_MAX_TX_QS];
566         struct fec_enet_priv_rx_q *rx_queue[FEC_ENET_MAX_RX_QS];
567
568         unsigned int total_tx_ring_size;
569         unsigned int total_rx_ring_size;
570
571         struct  platform_device *pdev;
572
573         int     dev_id;
574
575         /* Phylib and MDIO interface */
576         struct  mii_bus *mii_bus;
577         uint    phy_speed;
578         phy_interface_t phy_interface;
579         struct device_node *phy_node;
580         bool    rgmii_txc_dly;
581         bool    rgmii_rxc_dly;
582         int     link;
583         int     full_duplex;
584         int     speed;
585         int     irq[FEC_IRQ_NUM];
586         bool    bufdesc_ex;
587         int     pause_flag;
588         int     wol_flag;
589         int     wake_irq;
590         u32     quirks;
591
592         struct  napi_struct napi;
593         int     csum_flags;
594
595         struct work_struct tx_timeout_work;
596
597         struct ptp_clock *ptp_clock;
598         struct ptp_clock_info ptp_caps;
599         unsigned long last_overflow_check;
600         spinlock_t tmreg_lock;
601         struct cyclecounter cc;
602         struct timecounter tc;
603         int rx_hwtstamp_filter;
604         u32 base_incval;
605         u32 cycle_speed;
606         int hwts_rx_en;
607         int hwts_tx_en;
608         struct delayed_work time_keep;
609         struct regulator *reg_phy;
610         struct fec_stop_mode_gpr stop_gpr;
611
612         unsigned int tx_align;
613         unsigned int rx_align;
614
615         /* hw interrupt coalesce */
616         unsigned int rx_pkts_itr;
617         unsigned int rx_time_itr;
618         unsigned int tx_pkts_itr;
619         unsigned int tx_time_itr;
620         unsigned int itr_clk_rate;
621
622         /* tx lpi eee mode */
623         struct ethtool_eee eee;
624         unsigned int clk_ref_rate;
625
626         u32 rx_copybreak;
627
628         /* ptp clock period in ns*/
629         unsigned int ptp_inc;
630
631         /* pps  */
632         int pps_channel;
633         unsigned int reload_period;
634         int pps_enable;
635         unsigned int next_counter;
636
637         u64 ethtool_stats[];
638 };
639
640 void fec_ptp_init(struct platform_device *pdev, int irq_idx);
641 void fec_ptp_stop(struct platform_device *pdev);
642 void fec_ptp_start_cyclecounter(struct net_device *ndev);
643 void fec_ptp_disable_hwts(struct net_device *ndev);
644 int fec_ptp_set(struct net_device *ndev, struct ifreq *ifr);
645 int fec_ptp_get(struct net_device *ndev, struct ifreq *ifr);
646
647 /****************************************************************************/
648 #endif /* FEC_H */
This page took 0.099854 seconds and 4 git commands to generate.