drivers/usb/serial/pl2303.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Prolific PL2303 USB to serial adaptor driver
   4  *
   5  * Copyright (C) 2001-2007 Greg Kroah-Hartman ([email protected])
   6  * Copyright (C) 2003 IBM Corp.
   7  *
   8  * Original driver for 2.2.x by anonymous
   9  *
  10  * See Documentation/usb/usb-serial.txt for more information on using this
  11  * driver
  12  */
  13
  14 #include <linux/kernel.h>
  15 #include <linux/errno.h>
  16 #include <linux/slab.h>
  17 #include <linux/tty.h>
  18 #include <linux/tty_driver.h>
  19 #include <linux/tty_flip.h>
  20 #include <linux/serial.h>
  21 #include <linux/module.h>
  22 #include <linux/moduleparam.h>
  23 #include <linux/spinlock.h>
  24 #include <linux/uaccess.h>
  25 #include <linux/usb.h>
  26 #include <linux/usb/serial.h>
  27 #include <asm/unaligned.h>
  28 #include "pl2303.h"
  29
  30
  31 #define PL2303_QUIRK_UART_STATE_IDX0            BIT(0)
  32 #define PL2303_QUIRK_LEGACY                     BIT(1)
  33 #define PL2303_QUIRK_ENDPOINT_HACK              BIT(2)
  34
  35 static const struct usb_device_id id_table[] = {
  36         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID),
  37                 .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
  38         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
  39         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
  40         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
  41         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_CHILITAG) },
  42         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
  43         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
  44         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
  45         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
  46         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
  47         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
  48         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
  49         { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_TB) },
  50         { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
  51         { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
  52         { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID),
  53                 .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
  54         { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC485),
  55                 .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
  56         { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC232B),
  57                 .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
  58         { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) },
  59         { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
  60         { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
  61         { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
  62         { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
  63         { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
  64         { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
  65         { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
  66         { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
  67         { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
  68         { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
  69         { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
  70         { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
  71         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1),
  72                 .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
  73         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65),
  74                 .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
  75         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75),
  76                 .driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
  77         { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81),
  78                 .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
  79         { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
  80         { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
  81         { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
  82         { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
  83         { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
  84         { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
  85         { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
  86         { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
  87         { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
  88         { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID),
  89                 .driver_info = PL2303_QUIRK_ENDPOINT_HACK },
  90         { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
  91         { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
  92         { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
  93         { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
  94         { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
  95         { USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) },
  96         { USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
  97         { USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) },
  98         { USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
  99         { USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
 100         { USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) },
 101         { USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) },
 102         { USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) },
 103         { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
 104         { USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
 105         { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 106         { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 107         { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
 108         { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
 109         { USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
 110         { }                                     /* Terminating entry */
 111 };
 112
 113 MODULE_DEVICE_TABLE(usb, id_table);
 114
 115 #define SET_LINE_REQUEST_TYPE           0x21
 116 #define SET_LINE_REQUEST                0x20
 117
 118 #define SET_CONTROL_REQUEST_TYPE        0x21
 119 #define SET_CONTROL_REQUEST             0x22
 120 #define CONTROL_DTR                     0x01
 121 #define CONTROL_RTS                     0x02
 122
 123 #define BREAK_REQUEST_TYPE              0x21
 124 #define BREAK_REQUEST                   0x23
 125 #define BREAK_ON                        0xffff
 126 #define BREAK_OFF                       0x0000
 127
 128 #define GET_LINE_REQUEST_TYPE           0xa1
 129 #define GET_LINE_REQUEST                0x21
 130
 131 #define VENDOR_WRITE_REQUEST_TYPE       0x40
 132 #define VENDOR_WRITE_REQUEST            0x01
 133
 134 #define VENDOR_READ_REQUEST_TYPE        0xc0
 135 #define VENDOR_READ_REQUEST             0x01
 136
 137 #define UART_STATE_INDEX                8
 138 #define UART_STATE_MSR_MASK             0x8b
 139 #define UART_STATE_TRANSIENT_MASK       0x74
 140 #define UART_DCD                        0x01
 141 #define UART_DSR                        0x02
 142 #define UART_BREAK_ERROR                0x04
 143 #define UART_RING                       0x08
 144 #define UART_FRAME_ERROR                0x10
 145 #define UART_PARITY_ERROR               0x20
 146 #define UART_OVERRUN_ERROR              0x40
 147 #define UART_CTS                        0x80
 148
 149 #define PL2303_FLOWCTRL_MASK            0xf0
 150
 151 static void pl2303_set_break(struct usb_serial_port *port, bool enable);
 152
 153 enum pl2303_type {
 154         TYPE_01,        /* Type 0 and 1 (difference unknown) */
 155         TYPE_HX,        /* HX version of the pl2303 chip */
 156         TYPE_COUNT
 157 };
 158
 159 struct pl2303_type_data {
 160         speed_t max_baud_rate;
 161         unsigned long quirks;
 162         unsigned int no_autoxonxoff:1;
 163 };
 164
 165 struct pl2303_serial_private {
 166         const struct pl2303_type_data *type;
 167         unsigned long quirks;
 168 };
 169
 170 struct pl2303_private {
 171         spinlock_t lock;
 172         u8 line_control;
 173         u8 line_status;
 174
 175         u8 line_settings[7];
 176 };
 177
 178 static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
 179         [TYPE_01] = {
 180                 .max_baud_rate          = 1228800,
 181                 .quirks                 = PL2303_QUIRK_LEGACY,
 182                 .no_autoxonxoff         = true,
 183         },
 184         [TYPE_HX] = {
 185                 .max_baud_rate          = 12000000,
 186         },
 187 };
 188
 189 static int pl2303_vendor_read(struct usb_serial *serial, u16 value,
 190                                                         unsigned char buf[1])
 191 {
 192         struct device *dev = &serial->interface->dev;
 193         int res;
 194
 195         res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 196                         VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
 197                         value, 0, buf, 1, 100);
 198         if (res != 1) {
 199                 dev_err(dev, "%s - failed to read [%04x]: %d\n", __func__,
 200                                                                 value, res);
 201                 if (res >= 0)
 202                         res = -EIO;
 203
 204                 return res;
 205         }
 206
 207         dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, buf[0]);
 208
 209         return 0;
 210 }
 211
 212 static int pl2303_vendor_write(struct usb_serial *serial, u16 value, u16 index)
 213 {
 214         struct device *dev = &serial->interface->dev;
 215         int res;
 216
 217         dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, index);
 218
 219         res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 220                         VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
 221                         value, index, NULL, 0, 100);
 222         if (res) {
 223                 dev_err(dev, "%s - failed to write [%04x]: %d\n", __func__,
 224                                                                 value, res);
 225                 return res;
 226         }
 227
 228         return 0;
 229 }
 230
 231 static int pl2303_update_reg(struct usb_serial *serial, u8 reg, u8 mask, u8 val)
 232 {
 233         int ret = 0;
 234         u8 *buf;
 235
 236         buf = kmalloc(1, GFP_KERNEL);
 237         if (!buf)
 238                 return -ENOMEM;
 239
 240         ret = pl2303_vendor_read(serial, reg | 0x80, buf);
 241         if (ret)
 242                 goto out_free;
 243
 244         *buf &= ~mask;
 245         *buf |= val & mask;
 246
 247         ret = pl2303_vendor_write(serial, reg, *buf);
 248 out_free:
 249         kfree(buf);
 250
 251         return ret;
 252 }
 253
 254 static int pl2303_probe(struct usb_serial *serial,
 255                                         const struct usb_device_id *id)
 256 {
 257         usb_set_serial_data(serial, (void *)id->driver_info);
 258
 259         return 0;
 260 }
 261
 262 /*
 263  * Use interrupt endpoint from first interface if available.
 264  *
 265  * This is needed due to the looney way its endpoints are set up.
 266  */
 267 static int pl2303_endpoint_hack(struct usb_serial *serial,
 268                                         struct usb_serial_endpoints *epds)
 269 {
 270         struct usb_interface *interface = serial->interface;
 271         struct usb_device *dev = serial->dev;
 272         struct device *ddev = &interface->dev;
 273         struct usb_host_interface *iface_desc;
 274         struct usb_endpoint_descriptor *endpoint;
 275         unsigned int i;
 276
 277         if (interface == dev->actconfig->interface[0])
 278                 return 0;
 279
 280         /* check out the endpoints of the other interface */
 281         iface_desc = dev->actconfig->interface[0]->cur_altsetting;
 282
 283         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 284                 endpoint = &iface_desc->endpoint[i].desc;
 285
 286                 if (!usb_endpoint_is_int_in(endpoint))
 287                         continue;
 288
 289                 dev_dbg(ddev, "found interrupt in on separate interface\n");
 290                 if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in))
 291                         epds->interrupt_in[epds->num_interrupt_in++] = endpoint;
 292         }
 293
 294         return 0;
 295 }
 296
 297 static int pl2303_calc_num_ports(struct usb_serial *serial,
 298                                         struct usb_serial_endpoints *epds)
 299 {
 300         unsigned long quirks = (unsigned long)usb_get_serial_data(serial);
 301         struct device *dev = &serial->interface->dev;
 302         int ret;
 303
 304         if (quirks & PL2303_QUIRK_ENDPOINT_HACK) {
 305                 ret = pl2303_endpoint_hack(serial, epds);
 306                 if (ret)
 307                         return ret;
 308         }
 309
 310         if (epds->num_interrupt_in < 1) {
 311                 dev_err(dev, "required interrupt-in endpoint missing\n");
 312                 return -ENODEV;
 313         }
 314
 315         return 1;
 316 }
 317
 318 static int pl2303_startup(struct usb_serial *serial)
 319 {
 320         struct pl2303_serial_private *spriv;
 321         enum pl2303_type type = TYPE_01;
 322         unsigned char *buf;
 323
 324         spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
 325         if (!spriv)
 326                 return -ENOMEM;
 327
 328         buf = kmalloc(1, GFP_KERNEL);
 329         if (!buf) {
 330                 kfree(spriv);
 331                 return -ENOMEM;
 332         }
 333
 334         if (serial->dev->descriptor.bDeviceClass == 0x02)
 335                 type = TYPE_01;         /* type 0 */
 336         else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
 337                 type = TYPE_HX;
 338         else if (serial->dev->descriptor.bDeviceClass == 0x00)
 339                 type = TYPE_01;         /* type 1 */
 340         else if (serial->dev->descriptor.bDeviceClass == 0xFF)
 341                 type = TYPE_01;         /* type 1 */
 342         dev_dbg(&serial->interface->dev, "device type: %d\n", type);
 343
 344         spriv->type = &pl2303_type_data[type];
 345         spriv->quirks = (unsigned long)usb_get_serial_data(serial);
 346         spriv->quirks |= spriv->type->quirks;
 347
 348         usb_set_serial_data(serial, spriv);
 349
 350         pl2303_vendor_read(serial, 0x8484, buf);
 351         pl2303_vendor_write(serial, 0x0404, 0);
 352         pl2303_vendor_read(serial, 0x8484, buf);
 353         pl2303_vendor_read(serial, 0x8383, buf);
 354         pl2303_vendor_read(serial, 0x8484, buf);
 355         pl2303_vendor_write(serial, 0x0404, 1);
 356         pl2303_vendor_read(serial, 0x8484, buf);
 357         pl2303_vendor_read(serial, 0x8383, buf);
 358         pl2303_vendor_write(serial, 0, 1);
 359         pl2303_vendor_write(serial, 1, 0);
 360         if (spriv->quirks & PL2303_QUIRK_LEGACY)
 361                 pl2303_vendor_write(serial, 2, 0x24);
 362         else
 363                 pl2303_vendor_write(serial, 2, 0x44);
 364
 365         kfree(buf);
 366
 367         return 0;
 368 }
 369
 370 static void pl2303_release(struct usb_serial *serial)
 371 {
 372         struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 373
 374         kfree(spriv);
 375 }
 376
 377 static int pl2303_port_probe(struct usb_serial_port *port)
 378 {
 379         struct pl2303_private *priv;
 380
 381         priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 382         if (!priv)
 383                 return -ENOMEM;
 384
 385         spin_lock_init(&priv->lock);
 386
 387         usb_set_serial_port_data(port, priv);
 388
 389         port->port.drain_delay = 256;
 390
 391         return 0;
 392 }
 393
 394 static int pl2303_port_remove(struct usb_serial_port *port)
 395 {
 396         struct pl2303_private *priv = usb_get_serial_port_data(port);
 397
 398         kfree(priv);
 399
 400         return 0;
 401 }
 402
 403 static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value)
 404 {
 405         struct usb_device *dev = port->serial->dev;
 406         int retval;
 407
 408         dev_dbg(&port->dev, "%s - %02x\n", __func__, value);
 409
 410         retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 411                                  SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
 412                                  value, 0, NULL, 0, 100);
 413         if (retval)
 414                 dev_err(&port->dev, "%s - failed: %d\n", __func__, retval);
 415
 416         return retval;
 417 }
 418
 419 /*
 420  * Returns the nearest supported baud rate that can be set directly without
 421  * using divisors.
 422  */
 423 static speed_t pl2303_get_supported_baud_rate(speed_t baud)
 424 {
 425         static const speed_t baud_sup[] = {
 426                 75, 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600,
 427                 14400, 19200, 28800, 38400, 57600, 115200, 230400, 460800,
 428                 614400, 921600, 1228800, 2457600, 3000000, 6000000
 429         };
 430
 431         unsigned i;
 432
 433         for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) {
 434                 if (baud_sup[i] > baud)
 435                         break;
 436         }
 437
 438         if (i == ARRAY_SIZE(baud_sup))
 439                 baud = baud_sup[i - 1];
 440         else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1]))
 441                 baud = baud_sup[i - 1];
 442         else
 443                 baud = baud_sup[i];
 444
 445         return baud;
 446 }
 447
 448 /*
 449  * NOTE: If unsupported baud rates are set directly, the PL2303 seems to
 450  *       use 9600 baud.
 451  */
 452 static speed_t pl2303_encode_baud_rate_direct(unsigned char buf[4],
 453                                                                 speed_t baud)
 454 {
 455         put_unaligned_le32(baud, buf);
 456
 457         return baud;
 458 }
 459
 460 static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4],
 461                                                                 speed_t baud)
 462 {
 463         unsigned int baseline, mantissa, exponent;
 464
 465         /*
 466          * Apparently the formula is:
 467          *   baudrate = 12M * 32 / (mantissa * 4^exponent)
 468          * where
 469          *   mantissa = buf[8:0]
 470          *   exponent = buf[11:9]
 471          */
 472         baseline = 12000000 * 32;
 473         mantissa = baseline / baud;
 474         if (mantissa == 0)
 475                 mantissa = 1;   /* Avoid dividing by zero if baud > 32*12M. */
 476         exponent = 0;
 477         while (mantissa >= 512) {
 478                 if (exponent < 7) {
 479                         mantissa >>= 2; /* divide by 4 */
 480                         exponent++;
 481                 } else {
 482                         /* Exponent is maxed. Trim mantissa and leave. */
 483                         mantissa = 511;
 484                         break;
 485                 }
 486         }
 487
 488         buf[3] = 0x80;
 489         buf[2] = 0;
 490         buf[1] = exponent << 1 | mantissa >> 8;
 491         buf[0] = mantissa & 0xff;
 492
 493         /* Calculate and return the exact baud rate. */
 494         baud = (baseline / mantissa) >> (exponent << 1);
 495
 496         return baud;
 497 }
 498
 499 static void pl2303_encode_baud_rate(struct tty_struct *tty,
 500                                         struct usb_serial_port *port,
 501                                         u8 buf[4])
 502 {
 503         struct usb_serial *serial = port->serial;
 504         struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 505         speed_t baud_sup;
 506         speed_t baud;
 507
 508         baud = tty_get_baud_rate(tty);
 509         dev_dbg(&port->dev, "baud requested = %u\n", baud);
 510         if (!baud)
 511                 return;
 512
 513         if (spriv->type->max_baud_rate)
 514                 baud = min_t(speed_t, baud, spriv->type->max_baud_rate);
 515         /*
 516          * Use direct method for supported baud rates, otherwise use divisors.
 517          */
 518         baud_sup = pl2303_get_supported_baud_rate(baud);
 519
 520         if (baud == baud_sup)
 521                 baud = pl2303_encode_baud_rate_direct(buf, baud);
 522         else
 523                 baud = pl2303_encode_baud_rate_divisor(buf, baud);
 524
 525         /* Save resulting baud rate */
 526         tty_encode_baud_rate(tty, baud, baud);
 527         dev_dbg(&port->dev, "baud set = %u\n", baud);
 528 }
 529
 530 static int pl2303_get_line_request(struct usb_serial_port *port,
 531                                                         unsigned char buf[7])
 532 {
 533         struct usb_device *udev = port->serial->dev;
 534         int ret;
 535
 536         ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 537                                 GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
 538                                 0, 0, buf, 7, 100);
 539         if (ret != 7) {
 540                 dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
 541
 542                 if (ret >= 0)
 543                         ret = -EIO;
 544
 545                 return ret;
 546         }
 547
 548         dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf);
 549
 550         return 0;
 551 }
 552
 553 static int pl2303_set_line_request(struct usb_serial_port *port,
 554                                                         unsigned char buf[7])
 555 {
 556         struct usb_device *udev = port->serial->dev;
 557         int ret;
 558
 559         ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 560                                 SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
 561                                 0, 0, buf, 7, 100);
 562         if (ret < 0) {
 563                 dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
 564                 return ret;
 565         }
 566
 567         dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf);
 568
 569         return 0;
 570 }
 571
 572 static bool pl2303_termios_change(const struct ktermios *a, const struct ktermios *b)
 573 {
 574         bool ixon_change;
 575
 576         ixon_change = ((a->c_iflag ^ b->c_iflag) & (IXON | IXANY)) ||
 577                         a->c_cc[VSTART] != b->c_cc[VSTART] ||
 578                         a->c_cc[VSTOP] != b->c_cc[VSTOP];
 579
 580         return tty_termios_hw_change(a, b) || ixon_change;
 581 }
 582
 583 static bool pl2303_enable_xonxoff(struct tty_struct *tty, const struct pl2303_type_data *type)
 584 {
 585         if (!I_IXON(tty) || I_IXANY(tty))
 586                 return false;
 587
 588         if (START_CHAR(tty) != 0x11 || STOP_CHAR(tty) != 0x13)
 589                 return false;
 590
 591         if (type->no_autoxonxoff)
 592                 return false;
 593
 594         return true;
 595 }
 596
 597 static void pl2303_set_termios(struct tty_struct *tty,
 598                 struct usb_serial_port *port, struct ktermios *old_termios)
 599 {
 600         struct usb_serial *serial = port->serial;
 601         struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 602         struct pl2303_private *priv = usb_get_serial_port_data(port);
 603         unsigned long flags;
 604         unsigned char *buf;
 605         int ret;
 606         u8 control;
 607
 608         if (old_termios && !pl2303_termios_change(&tty->termios, old_termios))
 609                 return;
 610
 611         buf = kzalloc(7, GFP_KERNEL);
 612         if (!buf) {
 613                 /* Report back no change occurred */
 614                 if (old_termios)
 615                         tty->termios = *old_termios;
 616                 return;
 617         }
 618
 619         pl2303_get_line_request(port, buf);
 620
 621         switch (C_CSIZE(tty)) {
 622         case CS5:
 623                 buf[6] = 5;
 624                 break;
 625         case CS6:
 626                 buf[6] = 6;
 627                 break;
 628         case CS7:
 629                 buf[6] = 7;
 630                 break;
 631         default:
 632         case CS8:
 633                 buf[6] = 8;
 634         }
 635         dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
 636
 637         /* For reference buf[0]:buf[3] baud rate value */
 638         pl2303_encode_baud_rate(tty, port, &buf[0]);
 639
 640         /* For reference buf[4]=0 is 1 stop bits */
 641         /* For reference buf[4]=1 is 1.5 stop bits */
 642         /* For reference buf[4]=2 is 2 stop bits */
 643         if (C_CSTOPB(tty)) {
 644                 /*
 645                  * NOTE: Comply with "real" UARTs / RS232:
 646                  *       use 1.5 instead of 2 stop bits with 5 data bits
 647                  */
 648                 if (C_CSIZE(tty) == CS5) {
 649                         buf[4] = 1;
 650                         dev_dbg(&port->dev, "stop bits = 1.5\n");
 651                 } else {
 652                         buf[4] = 2;
 653                         dev_dbg(&port->dev, "stop bits = 2\n");
 654                 }
 655         } else {
 656                 buf[4] = 0;
 657                 dev_dbg(&port->dev, "stop bits = 1\n");
 658         }
 659
 660         if (C_PARENB(tty)) {
 661                 /* For reference buf[5]=0 is none parity */
 662                 /* For reference buf[5]=1 is odd parity */
 663                 /* For reference buf[5]=2 is even parity */
 664                 /* For reference buf[5]=3 is mark parity */
 665                 /* For reference buf[5]=4 is space parity */
 666                 if (C_PARODD(tty)) {
 667                         if (C_CMSPAR(tty)) {
 668                                 buf[5] = 3;
 669                                 dev_dbg(&port->dev, "parity = mark\n");
 670                         } else {
 671                                 buf[5] = 1;
 672                                 dev_dbg(&port->dev, "parity = odd\n");
 673                         }
 674                 } else {
 675                         if (C_CMSPAR(tty)) {
 676                                 buf[5] = 4;
 677                                 dev_dbg(&port->dev, "parity = space\n");
 678                         } else {
 679                                 buf[5] = 2;
 680                                 dev_dbg(&port->dev, "parity = even\n");
 681                         }
 682                 }
 683         } else {
 684                 buf[5] = 0;
 685                 dev_dbg(&port->dev, "parity = none\n");
 686         }
 687
 688         /*
 689          * Some PL2303 are known to lose bytes if you change serial settings
 690          * even to the same values as before. Thus we actually need to filter
 691          * in this specific case.
 692          *
 693          * Note that the tty_termios_hw_change check above is not sufficient
 694          * as a previously requested baud rate may differ from the one
 695          * actually used (and stored in old_termios).
 696          *
 697          * NOTE: No additional locking needed for line_settings as it is
 698          *       only used in set_termios, which is serialised against itself.
 699          */
 700         if (!old_termios || memcmp(buf, priv->line_settings, 7)) {
 701                 ret = pl2303_set_line_request(port, buf);
 702                 if (!ret)
 703                         memcpy(priv->line_settings, buf, 7);
 704         }
 705
 706         /* change control lines if we are switching to or from B0 */
 707         spin_lock_irqsave(&priv->lock, flags);
 708         control = priv->line_control;
 709         if (C_BAUD(tty) == B0)
 710                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 711         else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
 712                 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 713         if (control != priv->line_control) {
 714                 control = priv->line_control;
 715                 spin_unlock_irqrestore(&priv->lock, flags);
 716                 pl2303_set_control_lines(port, control);
 717         } else {
 718                 spin_unlock_irqrestore(&priv->lock, flags);
 719         }
 720
 721         if (C_CRTSCTS(tty)) {
 722                 if (spriv->quirks & PL2303_QUIRK_LEGACY)
 723                         pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0x40);
 724                 else
 725                         pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0x60);
 726         } else if (pl2303_enable_xonxoff(tty, spriv->type)) {
 727                 pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0xc0);
 728         } else {
 729                 pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0);
 730         }
 731
 732         kfree(buf);
 733 }
 734
 735 static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
 736 {
 737         struct pl2303_private *priv = usb_get_serial_port_data(port);
 738         unsigned long flags;
 739         u8 control;
 740
 741         spin_lock_irqsave(&priv->lock, flags);
 742         if (on)
 743                 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
 744         else
 745                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
 746         control = priv->line_control;
 747         spin_unlock_irqrestore(&priv->lock, flags);
 748
 749         pl2303_set_control_lines(port, control);
 750 }
 751
 752 static void pl2303_close(struct usb_serial_port *port)
 753 {
 754         usb_serial_generic_close(port);
 755         usb_kill_urb(port->interrupt_in_urb);
 756         pl2303_set_break(port, false);
 757 }
 758
 759 static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 760 {
 761         struct usb_serial *serial = port->serial;
 762         struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 763         int result;
 764
 765         if (spriv->quirks & PL2303_QUIRK_LEGACY) {
 766                 usb_clear_halt(serial->dev, port->write_urb->pipe);
 767                 usb_clear_halt(serial->dev, port->read_urb->pipe);
 768         } else {
 769                 /* reset upstream data pipes */
 770                 pl2303_vendor_write(serial, 8, 0);
 771                 pl2303_vendor_write(serial, 9, 0);
 772         }
 773
 774         /* Setup termios */
 775         if (tty)
 776                 pl2303_set_termios(tty, port, NULL);
 777
 778         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 779         if (result) {
 780                 dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
 781                         result);
 782                 return result;
 783         }
 784
 785         result = usb_serial_generic_open(tty, port);
 786         if (result) {
 787                 usb_kill_urb(port->interrupt_in_urb);
 788                 return result;
 789         }
 790
 791         return 0;
 792 }
 793
 794 static int pl2303_tiocmset(struct tty_struct *tty,
 795                            unsigned int set, unsigned int clear)
 796 {
 797         struct usb_serial_port *port = tty->driver_data;
 798         struct pl2303_private *priv = usb_get_serial_port_data(port);
 799         unsigned long flags;
 800         u8 control;
 801         int ret;
 802
 803         spin_lock_irqsave(&priv->lock, flags);
 804         if (set & TIOCM_RTS)
 805                 priv->line_control |= CONTROL_RTS;
 806         if (set & TIOCM_DTR)
 807                 priv->line_control |= CONTROL_DTR;
 808         if (clear & TIOCM_RTS)
 809                 priv->line_control &= ~CONTROL_RTS;
 810         if (clear & TIOCM_DTR)
 811                 priv->line_control &= ~CONTROL_DTR;
 812         control = priv->line_control;
 813         spin_unlock_irqrestore(&priv->lock, flags);
 814
 815         ret = pl2303_set_control_lines(port, control);
 816         if (ret)
 817                 return usb_translate_errors(ret);
 818
 819         return 0;
 820 }
 821
 822 static int pl2303_tiocmget(struct tty_struct *tty)
 823 {
 824         struct usb_serial_port *port = tty->driver_data;
 825         struct pl2303_private *priv = usb_get_serial_port_data(port);
 826         unsigned long flags;
 827         unsigned int mcr;
 828         unsigned int status;
 829         unsigned int result;
 830
 831         spin_lock_irqsave(&priv->lock, flags);
 832         mcr = priv->line_control;
 833         status = priv->line_status;
 834         spin_unlock_irqrestore(&priv->lock, flags);
 835
 836         result = ((mcr & CONTROL_DTR)           ? TIOCM_DTR : 0)
 837                   | ((mcr & CONTROL_RTS)        ? TIOCM_RTS : 0)
 838                   | ((status & UART_CTS)        ? TIOCM_CTS : 0)
 839                   | ((status & UART_DSR)        ? TIOCM_DSR : 0)
 840                   | ((status & UART_RING)       ? TIOCM_RI  : 0)
 841                   | ((status & UART_DCD)        ? TIOCM_CD  : 0);
 842
 843         dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
 844
 845         return result;
 846 }
 847
 848 static int pl2303_carrier_raised(struct usb_serial_port *port)
 849 {
 850         struct pl2303_private *priv = usb_get_serial_port_data(port);
 851
 852         if (priv->line_status & UART_DCD)
 853                 return 1;
 854
 855         return 0;
 856 }
 857
 858 static int pl2303_get_serial(struct tty_struct *tty,
 859                         struct serial_struct *ss)
 860 {
 861         struct usb_serial_port *port = tty->driver_data;
 862
 863         ss->type = PORT_16654;
 864         ss->line = port->minor;
 865         ss->port = port->port_number;
 866         ss->baud_base = 460800;
 867         return 0;
 868 }
 869
 870 static void pl2303_set_break(struct usb_serial_port *port, bool enable)
 871 {
 872         struct usb_serial *serial = port->serial;
 873         u16 state;
 874         int result;
 875
 876         if (enable)
 877                 state = BREAK_ON;
 878         else
 879                 state = BREAK_OFF;
 880
 881         dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
 882                         state == BREAK_OFF ? "off" : "on");
 883
 884         result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 885                                  BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
 886                                  0, NULL, 0, 100);
 887         if (result)
 888                 dev_err(&port->dev, "error sending break = %d\n", result);
 889 }
 890
 891 static void pl2303_break_ctl(struct tty_struct *tty, int state)
 892 {
 893         struct usb_serial_port *port = tty->driver_data;
 894
 895         pl2303_set_break(port, state);
 896 }
 897
 898 static void pl2303_update_line_status(struct usb_serial_port *port,
 899                                       unsigned char *data,
 900                                       unsigned int actual_length)
 901 {
 902         struct usb_serial *serial = port->serial;
 903         struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 904         struct pl2303_private *priv = usb_get_serial_port_data(port);
 905         struct tty_struct *tty;
 906         unsigned long flags;
 907         unsigned int status_idx = UART_STATE_INDEX;
 908         u8 status;
 909         u8 delta;
 910
 911         if (spriv->quirks & PL2303_QUIRK_UART_STATE_IDX0)
 912                 status_idx = 0;
 913
 914         if (actual_length < status_idx + 1)
 915                 return;
 916
 917         status = data[status_idx];
 918
 919         /* Save off the uart status for others to look at */
 920         spin_lock_irqsave(&priv->lock, flags);
 921         delta = priv->line_status ^ status;
 922         priv->line_status = status;
 923         spin_unlock_irqrestore(&priv->lock, flags);
 924
 925         if (status & UART_BREAK_ERROR)
 926                 usb_serial_handle_break(port);
 927
 928         if (delta & UART_STATE_MSR_MASK) {
 929                 if (delta & UART_CTS)
 930                         port->icount.cts++;
 931                 if (delta & UART_DSR)
 932                         port->icount.dsr++;
 933                 if (delta & UART_RING)
 934                         port->icount.rng++;
 935                 if (delta & UART_DCD) {
 936                         port->icount.dcd++;
 937                         tty = tty_port_tty_get(&port->port);
 938                         if (tty) {
 939                                 usb_serial_handle_dcd_change(port, tty,
 940                                                         status & UART_DCD);
 941                                 tty_kref_put(tty);
 942                         }
 943                 }
 944
 945                 wake_up_interruptible(&port->port.delta_msr_wait);
 946         }
 947 }
 948
 949 static void pl2303_read_int_callback(struct urb *urb)
 950 {
 951         struct usb_serial_port *port =  urb->context;
 952         unsigned char *data = urb->transfer_buffer;
 953         unsigned int actual_length = urb->actual_length;
 954         int status = urb->status;
 955         int retval;
 956
 957         switch (status) {
 958         case 0:
 959                 /* success */
 960                 break;
 961         case -ECONNRESET:
 962         case -ENOENT:
 963         case -ESHUTDOWN:
 964                 /* this urb is terminated, clean up */
 965                 dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
 966                         __func__, status);
 967                 return;
 968         default:
 969                 dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
 970                         __func__, status);
 971                 goto exit;
 972         }
 973
 974         usb_serial_debug_data(&port->dev, __func__,
 975                               urb->actual_length, urb->transfer_buffer);
 976
 977         pl2303_update_line_status(port, data, actual_length);
 978
 979 exit:
 980         retval = usb_submit_urb(urb, GFP_ATOMIC);
 981         if (retval) {
 982                 dev_err(&port->dev,
 983                         "%s - usb_submit_urb failed with result %d\n",
 984                         __func__, retval);
 985         }
 986 }
 987
 988 static void pl2303_process_read_urb(struct urb *urb)
 989 {
 990         struct usb_serial_port *port = urb->context;
 991         struct pl2303_private *priv = usb_get_serial_port_data(port);
 992         unsigned char *data = urb->transfer_buffer;
 993         char tty_flag = TTY_NORMAL;
 994         unsigned long flags;
 995         u8 line_status;
 996         int i;
 997
 998         /* update line status */
 999         spin_lock_irqsave(&priv->lock, flags);
1000         line_status = priv->line_status;
1001         priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
1002         spin_unlock_irqrestore(&priv->lock, flags);
1003
1004         if (!urb->actual_length)
1005                 return;
1006
1007         /*
1008          * Break takes precedence over parity, which takes precedence over
1009          * framing errors.
1010          */
1011         if (line_status & UART_BREAK_ERROR)
1012                 tty_flag = TTY_BREAK;
1013         else if (line_status & UART_PARITY_ERROR)
1014                 tty_flag = TTY_PARITY;
1015         else if (line_status & UART_FRAME_ERROR)
1016                 tty_flag = TTY_FRAME;
1017
1018         if (tty_flag != TTY_NORMAL)
1019                 dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__,
1020                                                                 tty_flag);
1021         /* overrun is special, not associated with a char */
1022         if (line_status & UART_OVERRUN_ERROR)
1023                 tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
1024
1025         if (port->port.console && port->sysrq) {
1026                 for (i = 0; i < urb->actual_length; ++i)
1027                         if (!usb_serial_handle_sysrq_char(port, data[i]))
1028                                 tty_insert_flip_char(&port->port, data[i],
1029                                                 tty_flag);
1030         } else {
1031                 tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
1032                                                         urb->actual_length);
1033         }
1034
1035         tty_flip_buffer_push(&port->port);
1036 }
1037
1038 static struct usb_serial_driver pl2303_device = {
1039         .driver = {
1040                 .owner =        THIS_MODULE,
1041                 .name =         "pl2303",
1042         },
1043         .id_table =             id_table,
1044         .num_bulk_in =          1,
1045         .num_bulk_out =         1,
1046         .num_interrupt_in =     0,      /* see pl2303_calc_num_ports */
1047         .bulk_in_size =         256,
1048         .bulk_out_size =        256,
1049         .open =                 pl2303_open,
1050         .close =                pl2303_close,
1051         .dtr_rts =              pl2303_dtr_rts,
1052         .carrier_raised =       pl2303_carrier_raised,
1053         .get_serial =           pl2303_get_serial,
1054         .break_ctl =            pl2303_break_ctl,
1055         .set_termios =          pl2303_set_termios,
1056         .tiocmget =             pl2303_tiocmget,
1057         .tiocmset =             pl2303_tiocmset,
1058         .tiocmiwait =           usb_serial_generic_tiocmiwait,
1059         .process_read_urb =     pl2303_process_read_urb,
1060         .read_int_callback =    pl2303_read_int_callback,
1061         .probe =                pl2303_probe,
1062         .calc_num_ports =       pl2303_calc_num_ports,
1063         .attach =               pl2303_startup,
1064         .release =              pl2303_release,
1065         .port_probe =           pl2303_port_probe,
1066         .port_remove =          pl2303_port_remove,
1067 };
1068
1069 static struct usb_serial_driver * const serial_drivers[] = {
1070         &pl2303_device, NULL
1071 };
1072
1073 module_usb_serial_driver(serial_drivers, id_table);
1074
1075 MODULE_DESCRIPTION("Prolific PL2303 USB to serial adaptor driver");
1076 MODULE_LICENSE("GPL v2");