]> Git Repo - linux.git/blob - drivers/scsi/libfc/fc_fcp.c
block: add a sanity check for non-write flush/fua bios
[linux.git] / drivers / scsi / libfc / fc_fcp.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright(c) 2007 Intel Corporation. All rights reserved.
4  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
5  * Copyright(c) 2008 Mike Christie
6  *
7  * Maintained at www.Open-FCoE.org
8  */
9
10 #include <linux/module.h>
11 #include <linux/delay.h>
12 #include <linux/kernel.h>
13 #include <linux/types.h>
14 #include <linux/spinlock.h>
15 #include <linux/scatterlist.h>
16 #include <linux/err.h>
17 #include <linux/crc32.h>
18 #include <linux/slab.h>
19
20 #include <scsi/scsi_tcq.h>
21 #include <scsi/scsi.h>
22 #include <scsi/scsi_host.h>
23 #include <scsi/scsi_device.h>
24 #include <scsi/scsi_cmnd.h>
25
26 #include <scsi/fc/fc_fc2.h>
27
28 #include <scsi/libfc.h>
29
30 #include "fc_encode.h"
31 #include "fc_libfc.h"
32
33 static struct kmem_cache *scsi_pkt_cachep;
34
35 /* SRB state definitions */
36 #define FC_SRB_FREE             0               /* cmd is free */
37 #define FC_SRB_CMD_SENT         (1 << 0)        /* cmd has been sent */
38 #define FC_SRB_RCV_STATUS       (1 << 1)        /* response has arrived */
39 #define FC_SRB_ABORT_PENDING    (1 << 2)        /* cmd abort sent to device */
40 #define FC_SRB_ABORTED          (1 << 3)        /* abort acknowledged */
41 #define FC_SRB_DISCONTIG        (1 << 4)        /* non-sequential data recvd */
42 #define FC_SRB_COMPL            (1 << 5)        /* fc_io_compl has been run */
43 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)      /* timer function processing */
44
45 #define FC_SRB_READ             (1 << 1)
46 #define FC_SRB_WRITE            (1 << 0)
47
48 static struct libfc_cmd_priv *libfc_priv(struct scsi_cmnd *cmd)
49 {
50         return scsi_cmd_priv(cmd);
51 }
52
53 /**
54  * struct fc_fcp_internal - FCP layer internal data
55  * @scsi_pkt_pool: Memory pool to draw FCP packets from
56  * @scsi_queue_lock: Protects the scsi_pkt_queue
57  * @scsi_pkt_queue: Current FCP packets
58  * @last_can_queue_ramp_down_time: ramp down time
59  * @last_can_queue_ramp_up_time: ramp up time
60  * @max_can_queue: max can_queue size
61  */
62 struct fc_fcp_internal {
63         mempool_t               *scsi_pkt_pool;
64         spinlock_t              scsi_queue_lock;
65         struct list_head        scsi_pkt_queue;
66         unsigned long           last_can_queue_ramp_down_time;
67         unsigned long           last_can_queue_ramp_up_time;
68         int                     max_can_queue;
69 };
70
71 #define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
72
73 /*
74  * function prototypes
75  * FC scsi I/O related functions
76  */
77 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
78 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
79 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
80 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
81 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
82 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
83 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
84 static void fc_fcp_timeout(struct timer_list *);
85 static void fc_fcp_rec(struct fc_fcp_pkt *);
86 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
87 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
88 static void fc_io_compl(struct fc_fcp_pkt *);
89
90 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
91 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
92 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
93
94 /*
95  * command status codes
96  */
97 #define FC_COMPLETE             0
98 #define FC_CMD_ABORTED          1
99 #define FC_CMD_RESET            2
100 #define FC_CMD_PLOGO            3
101 #define FC_SNS_RCV              4
102 #define FC_TRANS_ERR            5
103 #define FC_DATA_OVRRUN          6
104 #define FC_DATA_UNDRUN          7
105 #define FC_ERROR                8
106 #define FC_HRD_ERROR            9
107 #define FC_CRC_ERROR            10
108 #define FC_TIMED_OUT            11
109 #define FC_TRANS_RESET          12
110
111 /*
112  * Error recovery timeout values.
113  */
114 #define FC_SCSI_TM_TOV          (10 * HZ)
115 #define FC_HOST_RESET_TIMEOUT   (30 * HZ)
116 #define FC_CAN_QUEUE_PERIOD     (60 * HZ)
117
118 #define FC_MAX_ERROR_CNT        5
119 #define FC_MAX_RECOV_RETRY      3
120
121 #define FC_FCP_DFLT_QUEUE_DEPTH 32
122
123 /**
124  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
125  * @lport: The local port that the FCP packet is for
126  * @gfp:   GFP flags for allocation
127  *
128  * Return value: fcp_pkt structure or null on allocation failure.
129  * Context:      Can be called from process context, no lock is required.
130  */
131 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
132 {
133         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
134         struct fc_fcp_pkt *fsp;
135
136         fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
137         if (fsp) {
138                 memset(fsp, 0, sizeof(*fsp));
139                 fsp->lp = lport;
140                 fsp->xfer_ddp = FC_XID_UNKNOWN;
141                 refcount_set(&fsp->ref_cnt, 1);
142                 timer_setup(&fsp->timer, NULL, 0);
143                 INIT_LIST_HEAD(&fsp->list);
144                 spin_lock_init(&fsp->scsi_pkt_lock);
145         } else {
146                 this_cpu_inc(lport->stats->FcpPktAllocFails);
147         }
148         return fsp;
149 }
150
151 /**
152  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
153  * @fsp: The FCP packet to be released
154  *
155  * Context: Can be called from process or interrupt context,
156  *          no lock is required.
157  */
158 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
159 {
160         if (refcount_dec_and_test(&fsp->ref_cnt)) {
161                 struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
162
163                 mempool_free(fsp, si->scsi_pkt_pool);
164         }
165 }
166
167 /**
168  * fc_fcp_pkt_hold() - Hold a fcp_pkt
169  * @fsp: The FCP packet to be held
170  */
171 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
172 {
173         refcount_inc(&fsp->ref_cnt);
174 }
175
176 /**
177  * fc_fcp_pkt_destroy() - Release hold on a fcp_pkt
178  * @seq: The sequence that the FCP packet is on (required by destructor API)
179  * @fsp: The FCP packet to be released
180  *
181  * This routine is called by a destructor callback in the fc_exch_seq_send()
182  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
183  * argument even though it is not used by this routine.
184  *
185  * Context: No locking required.
186  */
187 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
188 {
189         fc_fcp_pkt_release(fsp);
190 }
191
192 /**
193  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
194  * @fsp: The FCP packet to be locked and incremented
195  *
196  * We should only return error if we return a command to SCSI-ml before
197  * getting a response. This can happen in cases where we send a abort, but
198  * do not wait for the response and the abort and command can be passing
199  * each other on the wire/network-layer.
200  *
201  * Note: this function locks the packet and gets a reference to allow
202  * callers to call the completion function while the lock is held and
203  * not have to worry about the packets refcount.
204  *
205  * TODO: Maybe we should just have callers grab/release the lock and
206  * have a function that they call to verify the fsp and grab a ref if
207  * needed.
208  */
209 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
210 {
211         spin_lock_bh(&fsp->scsi_pkt_lock);
212         if (fsp->state & FC_SRB_COMPL) {
213                 spin_unlock_bh(&fsp->scsi_pkt_lock);
214                 return -EPERM;
215         }
216
217         fc_fcp_pkt_hold(fsp);
218         return 0;
219 }
220
221 /**
222  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
223  *                       reference count
224  * @fsp: The FCP packet to be unlocked and decremented
225  */
226 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
227 {
228         spin_unlock_bh(&fsp->scsi_pkt_lock);
229         fc_fcp_pkt_release(fsp);
230 }
231
232 /**
233  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
234  * @fsp:   The FCP packet to start a timer for
235  * @delay: The timeout period in jiffies
236  */
237 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
238 {
239         if (!(fsp->state & FC_SRB_COMPL)) {
240                 mod_timer(&fsp->timer, jiffies + delay);
241                 fsp->timer_delay = delay;
242         }
243 }
244
245 static void fc_fcp_abort_done(struct fc_fcp_pkt *fsp)
246 {
247         fsp->state |= FC_SRB_ABORTED;
248         fsp->state &= ~FC_SRB_ABORT_PENDING;
249
250         if (fsp->wait_for_comp)
251                 complete(&fsp->tm_done);
252         else
253                 fc_fcp_complete_locked(fsp);
254 }
255
256 /**
257  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
258  *                       fcp_pkt
259  * @fsp: The FCP packet to abort exchanges on
260  */
261 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
262 {
263         int rc;
264
265         if (!fsp->seq_ptr)
266                 return -EINVAL;
267
268         this_cpu_inc(fsp->lp->stats->FcpPktAborts);
269
270         fsp->state |= FC_SRB_ABORT_PENDING;
271         rc = fc_seq_exch_abort(fsp->seq_ptr, 0);
272         /*
273          * fc_seq_exch_abort() might return -ENXIO if
274          * the sequence is already completed
275          */
276         if (rc == -ENXIO) {
277                 fc_fcp_abort_done(fsp);
278                 rc = 0;
279         }
280         return rc;
281 }
282
283 /**
284  * fc_fcp_retry_cmd() - Retry a fcp_pkt
285  * @fsp: The FCP packet to be retried
286  * @status_code: The FCP status code to set
287  *
288  * Sets the status code to be FC_ERROR and then calls
289  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
290  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
291  * The SCSI-ml will retry the command.
292  */
293 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp, int status_code)
294 {
295         if (fsp->seq_ptr) {
296                 fc_exch_done(fsp->seq_ptr);
297                 fsp->seq_ptr = NULL;
298         }
299
300         fsp->state &= ~FC_SRB_ABORT_PENDING;
301         fsp->io_status = 0;
302         fsp->status_code = status_code;
303         fc_fcp_complete_locked(fsp);
304 }
305
306 /**
307  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
308  * @fsp: The FCP packet that will manage the DDP frames
309  * @xid: The XID that will be used for the DDP exchange
310  */
311 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
312 {
313         struct fc_lport *lport;
314
315         lport = fsp->lp;
316         if ((fsp->req_flags & FC_SRB_READ) &&
317             (lport->lro_enabled) && (lport->tt.ddp_setup)) {
318                 if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
319                                         scsi_sg_count(fsp->cmd)))
320                         fsp->xfer_ddp = xid;
321         }
322 }
323
324 /**
325  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
326  *                     DDP related resources for a fcp_pkt
327  * @fsp: The FCP packet that DDP had been used on
328  */
329 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
330 {
331         struct fc_lport *lport;
332
333         if (!fsp)
334                 return;
335
336         if (fsp->xfer_ddp == FC_XID_UNKNOWN)
337                 return;
338
339         lport = fsp->lp;
340         if (lport->tt.ddp_done) {
341                 fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
342                 fsp->xfer_ddp = FC_XID_UNKNOWN;
343         }
344 }
345
346 /**
347  * fc_fcp_can_queue_ramp_up() - increases can_queue
348  * @lport: lport to ramp up can_queue
349  */
350 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
351 {
352         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
353         unsigned long flags;
354         int can_queue;
355
356         spin_lock_irqsave(lport->host->host_lock, flags);
357
358         if (si->last_can_queue_ramp_up_time &&
359             (time_before(jiffies, si->last_can_queue_ramp_up_time +
360                          FC_CAN_QUEUE_PERIOD)))
361                 goto unlock;
362
363         if (time_before(jiffies, si->last_can_queue_ramp_down_time +
364                         FC_CAN_QUEUE_PERIOD))
365                 goto unlock;
366
367         si->last_can_queue_ramp_up_time = jiffies;
368
369         can_queue = lport->host->can_queue << 1;
370         if (can_queue >= si->max_can_queue) {
371                 can_queue = si->max_can_queue;
372                 si->last_can_queue_ramp_down_time = 0;
373         }
374         lport->host->can_queue = can_queue;
375         shost_printk(KERN_ERR, lport->host, "libfc: increased "
376                      "can_queue to %d.\n", can_queue);
377
378 unlock:
379         spin_unlock_irqrestore(lport->host->host_lock, flags);
380 }
381
382 /**
383  * fc_fcp_can_queue_ramp_down() - reduces can_queue
384  * @lport: lport to reduce can_queue
385  *
386  * If we are getting memory allocation failures, then we may
387  * be trying to execute too many commands. We let the running
388  * commands complete or timeout, then try again with a reduced
389  * can_queue. Eventually we will hit the point where we run
390  * on all reserved structs.
391  */
392 static bool fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
393 {
394         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
395         unsigned long flags;
396         int can_queue;
397         bool changed = false;
398
399         spin_lock_irqsave(lport->host->host_lock, flags);
400
401         if (si->last_can_queue_ramp_down_time &&
402             (time_before(jiffies, si->last_can_queue_ramp_down_time +
403                          FC_CAN_QUEUE_PERIOD)))
404                 goto unlock;
405
406         si->last_can_queue_ramp_down_time = jiffies;
407
408         can_queue = lport->host->can_queue;
409         can_queue >>= 1;
410         if (!can_queue)
411                 can_queue = 1;
412         lport->host->can_queue = can_queue;
413         changed = true;
414
415 unlock:
416         spin_unlock_irqrestore(lport->host->host_lock, flags);
417         return changed;
418 }
419
420 /*
421  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
422  * @lport:      fc lport struct
423  * @len:        payload length
424  *
425  * Allocates fc_frame structure and buffer but if fails to allocate
426  * then reduce can_queue.
427  */
428 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
429                                                   size_t len)
430 {
431         struct fc_frame *fp;
432
433         fp = fc_frame_alloc(lport, len);
434         if (likely(fp))
435                 return fp;
436
437         this_cpu_inc(lport->stats->FcpFrameAllocFails);
438         /* error case */
439         fc_fcp_can_queue_ramp_down(lport);
440         shost_printk(KERN_ERR, lport->host,
441                      "libfc: Could not allocate frame, "
442                      "reducing can_queue to %d.\n", lport->host->can_queue);
443         return NULL;
444 }
445
446 /**
447  * get_fsp_rec_tov() - Helper function to get REC_TOV
448  * @fsp: the FCP packet
449  *
450  * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
451  */
452 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
453 {
454         struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
455         unsigned int e_d_tov = FC_DEF_E_D_TOV;
456
457         if (rpriv && rpriv->e_d_tov > e_d_tov)
458                 e_d_tov = rpriv->e_d_tov;
459         return msecs_to_jiffies(e_d_tov) + HZ;
460 }
461
462 /**
463  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
464  * @fsp: The FCP packet the data is on
465  * @fp:  The data frame
466  */
467 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
468 {
469         struct scsi_cmnd *sc = fsp->cmd;
470         struct fc_lport *lport = fsp->lp;
471         struct fc_frame_header *fh;
472         size_t start_offset;
473         size_t offset;
474         u32 crc;
475         u32 copy_len = 0;
476         size_t len;
477         void *buf;
478         struct scatterlist *sg;
479         u32 nents;
480         u8 host_bcode = FC_COMPLETE;
481
482         fh = fc_frame_header_get(fp);
483         offset = ntohl(fh->fh_parm_offset);
484         start_offset = offset;
485         len = fr_len(fp) - sizeof(*fh);
486         buf = fc_frame_payload_get(fp, 0);
487
488         /*
489          * if this I/O is ddped then clear it and initiate recovery since data
490          * frames are expected to be placed directly in that case.
491          *
492          * Indicate error to scsi-ml because something went wrong with the
493          * ddp handling to get us here.
494          */
495         if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
496                 fc_fcp_ddp_done(fsp);
497                 FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
498                 host_bcode = FC_ERROR;
499                 goto err;
500         }
501         if (offset + len > fsp->data_len) {
502                 /* this should never happen */
503                 if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
504                     fc_frame_crc_check(fp))
505                         goto crc_err;
506                 FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
507                            "data_len %x\n", len, offset, fsp->data_len);
508
509                 /* Data is corrupted indicate scsi-ml should retry */
510                 host_bcode = FC_DATA_OVRRUN;
511                 goto err;
512         }
513         if (offset != fsp->xfer_len)
514                 fsp->state |= FC_SRB_DISCONTIG;
515
516         sg = scsi_sglist(sc);
517         nents = scsi_sg_count(sc);
518
519         if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
520                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
521                                                     &offset, NULL);
522         } else {
523                 crc = crc32(~0, (u8 *) fh, sizeof(*fh));
524                 copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
525                                                     &offset, &crc);
526                 buf = fc_frame_payload_get(fp, 0);
527                 if (len % 4)
528                         crc = crc32(crc, buf + len, 4 - (len % 4));
529
530                 if (~crc != le32_to_cpu(fr_crc(fp))) {
531 crc_err:
532                         this_cpu_inc(lport->stats->ErrorFrames);
533                         /* per cpu count, not total count, but OK for limit */
534                         if (this_cpu_inc_return(lport->stats->InvalidCRCCount) < FC_MAX_ERROR_CNT)
535                                 printk(KERN_WARNING "libfc: CRC error on data "
536                                        "frame for port (%6.6x)\n",
537                                        lport->port_id);
538                         /*
539                          * Assume the frame is total garbage.
540                          * We may have copied it over the good part
541                          * of the buffer.
542                          * If so, we need to retry the entire operation.
543                          * Otherwise, ignore it.
544                          */
545                         if (fsp->state & FC_SRB_DISCONTIG) {
546                                 host_bcode = FC_CRC_ERROR;
547                                 goto err;
548                         }
549                         return;
550                 }
551         }
552
553         if (fsp->xfer_contig_end == start_offset)
554                 fsp->xfer_contig_end += copy_len;
555         fsp->xfer_len += copy_len;
556
557         /*
558          * In the very rare event that this data arrived after the response
559          * and completes the transfer, call the completion handler.
560          */
561         if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
562             fsp->xfer_len == fsp->data_len - fsp->scsi_resid) {
563                 FC_FCP_DBG( fsp, "complete out-of-order sequence\n" );
564                 fc_fcp_complete_locked(fsp);
565         }
566         return;
567 err:
568         fc_fcp_recovery(fsp, host_bcode);
569 }
570
571 /**
572  * fc_fcp_send_data() - Send SCSI data to a target
573  * @fsp:      The FCP packet the data is on
574  * @seq:      The sequence the data is to be sent on
575  * @offset:   The starting offset for this data request
576  * @seq_blen: The burst length for this data request
577  *
578  * Called after receiving a Transfer Ready data descriptor.
579  * If the LLD is capable of sequence offload then send down the
580  * seq_blen amount of data in single frame, otherwise send
581  * multiple frames of the maximum frame payload supported by
582  * the target port.
583  */
584 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
585                             size_t offset, size_t seq_blen)
586 {
587         struct fc_exch *ep;
588         struct scsi_cmnd *sc;
589         struct scatterlist *sg;
590         struct fc_frame *fp = NULL;
591         struct fc_lport *lport = fsp->lp;
592         struct page *page;
593         size_t remaining;
594         size_t t_blen;
595         size_t tlen;
596         size_t sg_bytes;
597         size_t frame_offset, fh_parm_offset;
598         size_t off;
599         int error;
600         void *data = NULL;
601         void *page_addr;
602         int using_sg = lport->sg_supp;
603         u32 f_ctl;
604
605         WARN_ON(seq_blen <= 0);
606         if (unlikely(offset + seq_blen > fsp->data_len)) {
607                 /* this should never happen */
608                 FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
609                            "offset %zx\n", seq_blen, offset);
610                 fc_fcp_send_abort(fsp);
611                 return 0;
612         } else if (offset != fsp->xfer_len) {
613                 /* Out of Order Data Request - no problem, but unexpected. */
614                 FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
615                            "seq_blen %zx offset %zx\n", seq_blen, offset);
616         }
617
618         /*
619          * if LLD is capable of seq_offload then set transport
620          * burst length (t_blen) to seq_blen, otherwise set t_blen
621          * to max FC frame payload previously set in fsp->max_payload.
622          */
623         t_blen = fsp->max_payload;
624         if (lport->seq_offload) {
625                 t_blen = min(seq_blen, (size_t)lport->lso_max);
626                 FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
627                            fsp, seq_blen, lport->lso_max, t_blen);
628         }
629
630         if (t_blen > 512)
631                 t_blen &= ~(512 - 1);   /* round down to block size */
632         sc = fsp->cmd;
633
634         remaining = seq_blen;
635         fh_parm_offset = frame_offset = offset;
636         tlen = 0;
637         seq = fc_seq_start_next(seq);
638         f_ctl = FC_FC_REL_OFF;
639         WARN_ON(!seq);
640
641         sg = scsi_sglist(sc);
642
643         while (remaining > 0 && sg) {
644                 if (offset >= sg->length) {
645                         offset -= sg->length;
646                         sg = sg_next(sg);
647                         continue;
648                 }
649                 if (!fp) {
650                         tlen = min(t_blen, remaining);
651
652                         /*
653                          * TODO.  Temporary workaround.  fc_seq_send() can't
654                          * handle odd lengths in non-linear skbs.
655                          * This will be the final fragment only.
656                          */
657                         if (tlen % 4)
658                                 using_sg = 0;
659                         fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
660                         if (!fp)
661                                 return -ENOMEM;
662
663                         data = fc_frame_header_get(fp) + 1;
664                         fh_parm_offset = frame_offset;
665                         fr_max_payload(fp) = fsp->max_payload;
666                 }
667
668                 off = offset + sg->offset;
669                 sg_bytes = min(tlen, sg->length - offset);
670                 sg_bytes = min(sg_bytes,
671                                (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
672                 page = sg_page(sg) + (off >> PAGE_SHIFT);
673                 if (using_sg) {
674                         get_page(page);
675                         skb_fill_page_desc(fp_skb(fp),
676                                            skb_shinfo(fp_skb(fp))->nr_frags,
677                                            page, off & ~PAGE_MASK, sg_bytes);
678                         fp_skb(fp)->data_len += sg_bytes;
679                         fr_len(fp) += sg_bytes;
680                         fp_skb(fp)->truesize += PAGE_SIZE;
681                 } else {
682                         /*
683                          * The scatterlist item may be bigger than PAGE_SIZE,
684                          * but we must not cross pages inside the kmap.
685                          */
686                         page_addr = kmap_atomic(page);
687                         memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
688                                sg_bytes);
689                         kunmap_atomic(page_addr);
690                         data += sg_bytes;
691                 }
692                 offset += sg_bytes;
693                 frame_offset += sg_bytes;
694                 tlen -= sg_bytes;
695                 remaining -= sg_bytes;
696
697                 if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
698                     (tlen))
699                         continue;
700
701                 /*
702                  * Send sequence with transfer sequence initiative in case
703                  * this is last FCP frame of the sequence.
704                  */
705                 if (remaining == 0)
706                         f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
707
708                 ep = fc_seq_exch(seq);
709                 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
710                                FC_TYPE_FCP, f_ctl, fh_parm_offset);
711
712                 /*
713                  * send fragment using for a sequence.
714                  */
715                 error = fc_seq_send(lport, seq, fp);
716                 if (error) {
717                         WARN_ON(1);             /* send error should be rare */
718                         return error;
719                 }
720                 fp = NULL;
721         }
722         fsp->xfer_len += seq_blen;      /* premature count? */
723         return 0;
724 }
725
726 /**
727  * fc_fcp_abts_resp() - Receive an ABTS response
728  * @fsp: The FCP packet that is being aborted
729  * @fp:  The response frame
730  */
731 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
732 {
733         int ba_done = 1;
734         struct fc_ba_rjt *brp;
735         struct fc_frame_header *fh;
736
737         fh = fc_frame_header_get(fp);
738         switch (fh->fh_r_ctl) {
739         case FC_RCTL_BA_ACC:
740                 break;
741         case FC_RCTL_BA_RJT:
742                 brp = fc_frame_payload_get(fp, sizeof(*brp));
743                 if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
744                         break;
745                 fallthrough;
746         default:
747                 /*
748                  * we will let the command timeout
749                  * and scsi-ml recover in this case,
750                  * therefore cleared the ba_done flag.
751                  */
752                 ba_done = 0;
753         }
754
755         if (ba_done)
756                 fc_fcp_abort_done(fsp);
757 }
758
759 /**
760  * fc_fcp_recv() - Receive an FCP frame
761  * @seq: The sequence the frame is on
762  * @fp:  The received frame
763  * @arg: The related FCP packet
764  *
765  * Context: Called from Soft IRQ context. Can not be called
766  *          holding the FCP packet list lock.
767  */
768 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
769 {
770         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
771         struct fc_lport *lport = fsp->lp;
772         struct fc_frame_header *fh;
773         struct fcp_txrdy *dd;
774         u8 r_ctl;
775         int rc = 0;
776
777         if (IS_ERR(fp)) {
778                 fc_fcp_error(fsp, fp);
779                 return;
780         }
781
782         fh = fc_frame_header_get(fp);
783         r_ctl = fh->fh_r_ctl;
784
785         if (lport->state != LPORT_ST_READY) {
786                 FC_FCP_DBG(fsp, "lport state %d, ignoring r_ctl %x\n",
787                            lport->state, r_ctl);
788                 goto out;
789         }
790         if (fc_fcp_lock_pkt(fsp))
791                 goto out;
792
793         if (fh->fh_type == FC_TYPE_BLS) {
794                 fc_fcp_abts_resp(fsp, fp);
795                 goto unlock;
796         }
797
798         if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING)) {
799                 FC_FCP_DBG(fsp, "command aborted, ignoring r_ctl %x\n", r_ctl);
800                 goto unlock;
801         }
802
803         if (r_ctl == FC_RCTL_DD_DATA_DESC) {
804                 /*
805                  * received XFER RDY from the target
806                  * need to send data to the target
807                  */
808                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
809                 dd = fc_frame_payload_get(fp, sizeof(*dd));
810                 WARN_ON(!dd);
811
812                 rc = fc_fcp_send_data(fsp, seq,
813                                       (size_t) ntohl(dd->ft_data_ro),
814                                       (size_t) ntohl(dd->ft_burst_len));
815                 if (!rc)
816                         seq->rec_data = fsp->xfer_len;
817         } else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
818                 /*
819                  * received a DATA frame
820                  * next we will copy the data to the system buffer
821                  */
822                 WARN_ON(fr_len(fp) < sizeof(*fh));      /* len may be 0 */
823                 fc_fcp_recv_data(fsp, fp);
824                 seq->rec_data = fsp->xfer_contig_end;
825         } else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
826                 WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
827
828                 fc_fcp_resp(fsp, fp);
829         } else {
830                 FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
831         }
832 unlock:
833         fc_fcp_unlock_pkt(fsp);
834 out:
835         fc_frame_free(fp);
836 }
837
838 /**
839  * fc_fcp_resp() - Handler for FCP responses
840  * @fsp: The FCP packet the response is for
841  * @fp:  The response frame
842  */
843 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
844 {
845         struct fc_frame_header *fh;
846         struct fcp_resp *fc_rp;
847         struct fcp_resp_ext *rp_ex;
848         struct fcp_resp_rsp_info *fc_rp_info;
849         u32 plen;
850         u32 expected_len;
851         u32 respl = 0;
852         u32 snsl = 0;
853         u8 flags = 0;
854
855         plen = fr_len(fp);
856         fh = (struct fc_frame_header *)fr_hdr(fp);
857         if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
858                 goto len_err;
859         plen -= sizeof(*fh);
860         fc_rp = (struct fcp_resp *)(fh + 1);
861         fsp->cdb_status = fc_rp->fr_status;
862         flags = fc_rp->fr_flags;
863         fsp->scsi_comp_flags = flags;
864         expected_len = fsp->data_len;
865
866         /* if ddp, update xfer len */
867         fc_fcp_ddp_done(fsp);
868
869         if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
870                 rp_ex = (void *)(fc_rp + 1);
871                 if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
872                         if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
873                                 goto len_err;
874                         fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
875                         if (flags & FCP_RSP_LEN_VAL) {
876                                 respl = ntohl(rp_ex->fr_rsp_len);
877                                 if ((respl != FCP_RESP_RSP_INFO_LEN4) &&
878                                     (respl != FCP_RESP_RSP_INFO_LEN8))
879                                         goto len_err;
880                                 if (fsp->wait_for_comp) {
881                                         /* Abuse cdb_status for rsp code */
882                                         fsp->cdb_status = fc_rp_info->rsp_code;
883                                         complete(&fsp->tm_done);
884                                         /*
885                                          * tmfs will not have any scsi cmd so
886                                          * exit here
887                                          */
888                                         return;
889                                 }
890                         }
891                         if (flags & FCP_SNS_LEN_VAL) {
892                                 snsl = ntohl(rp_ex->fr_sns_len);
893                                 if (snsl > SCSI_SENSE_BUFFERSIZE)
894                                         snsl = SCSI_SENSE_BUFFERSIZE;
895                                 memcpy(fsp->cmd->sense_buffer,
896                                        (char *)fc_rp_info + respl, snsl);
897                         }
898                 }
899                 if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
900                         if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
901                                 goto len_err;
902                         if (flags & FCP_RESID_UNDER) {
903                                 fsp->scsi_resid = ntohl(rp_ex->fr_resid);
904                                 /*
905                                  * The cmnd->underflow is the minimum number of
906                                  * bytes that must be transferred for this
907                                  * command.  Provided a sense condition is not
908                                  * present, make sure the actual amount
909                                  * transferred is at least the underflow value
910                                  * or fail.
911                                  */
912                                 if (!(flags & FCP_SNS_LEN_VAL) &&
913                                     (fc_rp->fr_status == 0) &&
914                                     (scsi_bufflen(fsp->cmd) -
915                                      fsp->scsi_resid) < fsp->cmd->underflow)
916                                         goto err;
917                                 expected_len -= fsp->scsi_resid;
918                         } else {
919                                 fsp->status_code = FC_ERROR;
920                         }
921                 }
922         }
923         fsp->state |= FC_SRB_RCV_STATUS;
924
925         /*
926          * Check for missing or extra data frames.
927          */
928         if (unlikely(fsp->cdb_status == SAM_STAT_GOOD &&
929                      fsp->xfer_len != expected_len)) {
930                 if (fsp->xfer_len < expected_len) {
931                         /*
932                          * Some data may be queued locally,
933                          * Wait a at least one jiffy to see if it is delivered.
934                          * If this expires without data, we may do SRR.
935                          */
936                         if (fsp->lp->qfull) {
937                                 FC_FCP_DBG(fsp, "tgt %6.6x queue busy retry\n",
938                                            fsp->rport->port_id);
939                                 return;
940                         }
941                         FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx data underrun "
942                                    "len %x, data len %x\n",
943                                    fsp->rport->port_id,
944                                    fsp->xfer_len, expected_len, fsp->data_len);
945                         fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
946                         return;
947                 }
948                 fsp->status_code = FC_DATA_OVRRUN;
949                 FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
950                            "len %x, data len %x\n",
951                            fsp->rport->port_id,
952                            fsp->xfer_len, expected_len, fsp->data_len);
953         }
954         fc_fcp_complete_locked(fsp);
955         return;
956
957 len_err:
958         FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
959                    "snsl %u\n", flags, fr_len(fp), respl, snsl);
960 err:
961         fsp->status_code = FC_ERROR;
962         fc_fcp_complete_locked(fsp);
963 }
964
965 /**
966  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
967  *                            fcp_pkt lock held
968  * @fsp: The FCP packet to be completed
969  *
970  * This function may sleep if a timer is pending. The packet lock must be
971  * held, and the host lock must not be held.
972  */
973 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
974 {
975         struct fc_lport *lport = fsp->lp;
976         struct fc_seq *seq;
977         struct fc_exch *ep;
978         u32 f_ctl;
979
980         if (fsp->state & FC_SRB_ABORT_PENDING)
981                 return;
982
983         if (fsp->state & FC_SRB_ABORTED) {
984                 if (!fsp->status_code)
985                         fsp->status_code = FC_CMD_ABORTED;
986         } else {
987                 /*
988                  * Test for transport underrun, independent of response
989                  * underrun status.
990                  */
991                 if (fsp->cdb_status == SAM_STAT_GOOD &&
992                     fsp->xfer_len < fsp->data_len && !fsp->io_status &&
993                     (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
994                      fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
995                         FC_FCP_DBG(fsp, "data underrun, xfer %zx data %x\n",
996                                     fsp->xfer_len, fsp->data_len);
997                         fsp->status_code = FC_DATA_UNDRUN;
998                 }
999         }
1000
1001         seq = fsp->seq_ptr;
1002         if (seq) {
1003                 fsp->seq_ptr = NULL;
1004                 if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
1005                         struct fc_frame *conf_frame;
1006                         struct fc_seq *csp;
1007
1008                         csp = fc_seq_start_next(seq);
1009                         conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
1010                         if (conf_frame) {
1011                                 f_ctl = FC_FC_SEQ_INIT;
1012                                 f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
1013                                 ep = fc_seq_exch(seq);
1014                                 fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
1015                                                ep->did, ep->sid,
1016                                                FC_TYPE_FCP, f_ctl, 0);
1017                                 fc_seq_send(lport, csp, conf_frame);
1018                         }
1019                 }
1020                 fc_exch_done(seq);
1021         }
1022         /*
1023          * Some resets driven by SCSI are not I/Os and do not have
1024          * SCSI commands associated with the requests. We should not
1025          * call I/O completion if we do not have a SCSI command.
1026          */
1027         if (fsp->cmd)
1028                 fc_io_compl(fsp);
1029 }
1030
1031 /**
1032  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
1033  * @fsp:   The FCP packet whose exchanges should be canceled
1034  * @error: The reason for the cancellation
1035  */
1036 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
1037 {
1038         if (fsp->seq_ptr) {
1039                 fc_exch_done(fsp->seq_ptr);
1040                 fsp->seq_ptr = NULL;
1041         }
1042         fsp->status_code = error;
1043 }
1044
1045 /**
1046  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1047  * @lport: The local port whose exchanges should be canceled
1048  * @id:    The target's ID
1049  * @lun:   The LUN
1050  * @error: The reason for cancellation
1051  *
1052  * If lun or id is -1, they are ignored.
1053  */
1054 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1055                                     unsigned int lun, int error)
1056 {
1057         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1058         struct fc_fcp_pkt *fsp;
1059         struct scsi_cmnd *sc_cmd;
1060         unsigned long flags;
1061
1062         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1063 restart:
1064         list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1065                 sc_cmd = fsp->cmd;
1066                 if (id != -1 && scmd_id(sc_cmd) != id)
1067                         continue;
1068
1069                 if (lun != -1 && sc_cmd->device->lun != lun)
1070                         continue;
1071
1072                 fc_fcp_pkt_hold(fsp);
1073                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1074
1075                 spin_lock_bh(&fsp->scsi_pkt_lock);
1076                 if (!(fsp->state & FC_SRB_COMPL)) {
1077                         fsp->state |= FC_SRB_COMPL;
1078                         /*
1079                          * TODO: dropping scsi_pkt_lock and then reacquiring
1080                          * again around fc_fcp_cleanup_cmd() is required,
1081                          * since fc_fcp_cleanup_cmd() calls into
1082                          * fc_seq_set_resp() and that func preempts cpu using
1083                          * schedule. May be schedule and related code should be
1084                          * removed instead of unlocking here to avoid scheduling
1085                          * while atomic bug.
1086                          */
1087                         spin_unlock_bh(&fsp->scsi_pkt_lock);
1088
1089                         fc_fcp_cleanup_cmd(fsp, error);
1090
1091                         spin_lock_bh(&fsp->scsi_pkt_lock);
1092                         fc_io_compl(fsp);
1093                 }
1094                 spin_unlock_bh(&fsp->scsi_pkt_lock);
1095
1096                 fc_fcp_pkt_release(fsp);
1097                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1098                 /*
1099                  * while we dropped the lock multiple pkts could
1100                  * have been released, so we have to start over.
1101                  */
1102                 goto restart;
1103         }
1104         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1105 }
1106
1107 /**
1108  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1109  * @lport: The local port whose exchanges are to be aborted
1110  */
1111 static void fc_fcp_abort_io(struct fc_lport *lport)
1112 {
1113         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1114 }
1115
1116 /**
1117  * fc_fcp_pkt_send() - Send a fcp_pkt
1118  * @lport: The local port to send the FCP packet on
1119  * @fsp:   The FCP packet to send
1120  *
1121  * Return:  Zero for success and -1 for failure
1122  * Locks:   Called without locks held
1123  */
1124 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1125 {
1126         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1127         unsigned long flags;
1128         int rc;
1129
1130         libfc_priv(fsp->cmd)->fsp = fsp;
1131         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1132         fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1133
1134         int_to_scsilun(fsp->cmd->device->lun, &fsp->cdb_cmd.fc_lun);
1135         memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1136
1137         spin_lock_irqsave(&si->scsi_queue_lock, flags);
1138         list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1139         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1140         rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1141         if (unlikely(rc)) {
1142                 spin_lock_irqsave(&si->scsi_queue_lock, flags);
1143                 libfc_priv(fsp->cmd)->fsp = NULL;
1144                 list_del(&fsp->list);
1145                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1146         }
1147
1148         return rc;
1149 }
1150
1151 /**
1152  * fc_fcp_cmd_send() - Send a FCP command
1153  * @lport: The local port to send the command on
1154  * @fsp:   The FCP packet the command is on
1155  * @resp:  The handler for the response
1156  */
1157 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1158                            void (*resp)(struct fc_seq *,
1159                                         struct fc_frame *fp,
1160                                         void *arg))
1161 {
1162         struct fc_frame *fp;
1163         struct fc_seq *seq;
1164         struct fc_rport *rport;
1165         struct fc_rport_libfc_priv *rpriv;
1166         const size_t len = sizeof(fsp->cdb_cmd);
1167         int rc = 0;
1168
1169         if (fc_fcp_lock_pkt(fsp))
1170                 return 0;
1171
1172         fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1173         if (!fp) {
1174                 rc = -1;
1175                 goto unlock;
1176         }
1177
1178         memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1179         fr_fsp(fp) = fsp;
1180         rport = fsp->rport;
1181         fsp->max_payload = rport->maxframe_size;
1182         rpriv = rport->dd_data;
1183
1184         fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1185                        rpriv->local_port->port_id, FC_TYPE_FCP,
1186                        FC_FCTL_REQ, 0);
1187
1188         seq = fc_exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy, fsp, 0);
1189         if (!seq) {
1190                 rc = -1;
1191                 goto unlock;
1192         }
1193         fsp->seq_ptr = seq;
1194         fc_fcp_pkt_hold(fsp);   /* hold for fc_fcp_pkt_destroy */
1195
1196         fsp->timer.function = fc_fcp_timeout;
1197         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1198                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1199
1200 unlock:
1201         fc_fcp_unlock_pkt(fsp);
1202         return rc;
1203 }
1204
1205 /**
1206  * fc_fcp_error() - Handler for FCP layer errors
1207  * @fsp: The FCP packet the error is on
1208  * @fp:  The frame that has errored
1209  */
1210 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1211 {
1212         int error = PTR_ERR(fp);
1213
1214         if (fc_fcp_lock_pkt(fsp))
1215                 return;
1216
1217         if (error == -FC_EX_CLOSED) {
1218                 fc_fcp_retry_cmd(fsp, FC_ERROR);
1219                 goto unlock;
1220         }
1221
1222         /*
1223          * clear abort pending, because the lower layer
1224          * decided to force completion.
1225          */
1226         fsp->state &= ~FC_SRB_ABORT_PENDING;
1227         fsp->status_code = FC_CMD_PLOGO;
1228         fc_fcp_complete_locked(fsp);
1229 unlock:
1230         fc_fcp_unlock_pkt(fsp);
1231 }
1232
1233 /**
1234  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1235  * @fsp:   The FCP packet to abort on
1236  *
1237  * Called to send an abort and then wait for abort completion
1238  */
1239 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1240 {
1241         int rc = FAILED;
1242         unsigned long ticks_left;
1243
1244         FC_FCP_DBG(fsp, "pkt abort state %x\n", fsp->state);
1245         if (fc_fcp_send_abort(fsp)) {
1246                 FC_FCP_DBG(fsp, "failed to send abort\n");
1247                 return FAILED;
1248         }
1249
1250         if (fsp->state & FC_SRB_ABORTED) {
1251                 FC_FCP_DBG(fsp, "target abort cmd  completed\n");
1252                 return SUCCESS;
1253         }
1254
1255         init_completion(&fsp->tm_done);
1256         fsp->wait_for_comp = 1;
1257
1258         spin_unlock_bh(&fsp->scsi_pkt_lock);
1259         ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1260                                                         FC_SCSI_TM_TOV);
1261         spin_lock_bh(&fsp->scsi_pkt_lock);
1262         fsp->wait_for_comp = 0;
1263
1264         if (!ticks_left) {
1265                 FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1266         } else if (fsp->state & FC_SRB_ABORTED) {
1267                 FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1268                 rc = SUCCESS;
1269                 fc_fcp_complete_locked(fsp);
1270         }
1271
1272         return rc;
1273 }
1274
1275 /**
1276  * fc_lun_reset_send() - Send LUN reset command
1277  * @t: Timer context used to fetch the FSP packet
1278  */
1279 static void fc_lun_reset_send(struct timer_list *t)
1280 {
1281         struct fc_fcp_pkt *fsp = from_timer(fsp, t, timer);
1282         struct fc_lport *lport = fsp->lp;
1283
1284         if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1285                 if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1286                         return;
1287                 if (fc_fcp_lock_pkt(fsp))
1288                         return;
1289                 fsp->timer.function = fc_lun_reset_send;
1290                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1291                 fc_fcp_unlock_pkt(fsp);
1292         }
1293 }
1294
1295 /**
1296  * fc_lun_reset() - Send a LUN RESET command to a device
1297  *                  and wait for the reply
1298  * @lport: The local port to sent the command on
1299  * @fsp:   The FCP packet that identifies the LUN to be reset
1300  * @id:    The SCSI command ID
1301  * @lun:   The LUN ID to be reset
1302  */
1303 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1304                         unsigned int id, unsigned int lun)
1305 {
1306         int rc;
1307
1308         fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1309         fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1310         int_to_scsilun(lun, &fsp->cdb_cmd.fc_lun);
1311
1312         fsp->wait_for_comp = 1;
1313         init_completion(&fsp->tm_done);
1314
1315         fc_lun_reset_send(&fsp->timer);
1316
1317         /*
1318          * wait for completion of reset
1319          * after that make sure all commands are terminated
1320          */
1321         rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1322
1323         spin_lock_bh(&fsp->scsi_pkt_lock);
1324         fsp->state |= FC_SRB_COMPL;
1325         spin_unlock_bh(&fsp->scsi_pkt_lock);
1326
1327         del_timer_sync(&fsp->timer);
1328
1329         spin_lock_bh(&fsp->scsi_pkt_lock);
1330         if (fsp->seq_ptr) {
1331                 fc_exch_done(fsp->seq_ptr);
1332                 fsp->seq_ptr = NULL;
1333         }
1334         fsp->wait_for_comp = 0;
1335         spin_unlock_bh(&fsp->scsi_pkt_lock);
1336
1337         if (!rc) {
1338                 FC_SCSI_DBG(lport, "lun reset failed\n");
1339                 return FAILED;
1340         }
1341
1342         /* cdb_status holds the tmf's rsp code */
1343         if (fsp->cdb_status != FCP_TMF_CMPL)
1344                 return FAILED;
1345
1346         FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1347         fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1348         return SUCCESS;
1349 }
1350
1351 /**
1352  * fc_tm_done() - Task Management response handler
1353  * @seq: The sequence that the response is on
1354  * @fp:  The response frame
1355  * @arg: The FCP packet the response is for
1356  */
1357 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1358 {
1359         struct fc_fcp_pkt *fsp = arg;
1360         struct fc_frame_header *fh;
1361
1362         if (IS_ERR(fp)) {
1363                 /*
1364                  * If there is an error just let it timeout or wait
1365                  * for TMF to be aborted if it timedout.
1366                  *
1367                  * scsi-eh will escalate for when either happens.
1368                  */
1369                 return;
1370         }
1371
1372         if (fc_fcp_lock_pkt(fsp))
1373                 goto out;
1374
1375         /*
1376          * raced with eh timeout handler.
1377          */
1378         if (!fsp->seq_ptr || !fsp->wait_for_comp)
1379                 goto out_unlock;
1380
1381         fh = fc_frame_header_get(fp);
1382         if (fh->fh_type != FC_TYPE_BLS)
1383                 fc_fcp_resp(fsp, fp);
1384         fsp->seq_ptr = NULL;
1385         fc_exch_done(seq);
1386 out_unlock:
1387         fc_fcp_unlock_pkt(fsp);
1388 out:
1389         fc_frame_free(fp);
1390 }
1391
1392 /**
1393  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1394  * @lport: The local port to be cleaned up
1395  */
1396 static void fc_fcp_cleanup(struct fc_lport *lport)
1397 {
1398         fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1399 }
1400
1401 /**
1402  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1403  * @t: Timer context used to fetch the FSP packet
1404  *
1405  * If REC is supported then just issue it and return. The REC exchange will
1406  * complete or time out and recovery can continue at that point. Otherwise,
1407  * if the response has been received without all the data it has been
1408  * ER_TIMEOUT since the response was received. If the response has not been
1409  * received we see if data was received recently. If it has been then we
1410  * continue waiting, otherwise, we abort the command.
1411  */
1412 static void fc_fcp_timeout(struct timer_list *t)
1413 {
1414         struct fc_fcp_pkt *fsp = from_timer(fsp, t, timer);
1415         struct fc_rport *rport = fsp->rport;
1416         struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1417
1418         if (fc_fcp_lock_pkt(fsp))
1419                 return;
1420
1421         if (fsp->cdb_cmd.fc_tm_flags)
1422                 goto unlock;
1423
1424         if (fsp->lp->qfull) {
1425                 FC_FCP_DBG(fsp, "fcp timeout, resetting timer delay %d\n",
1426                            fsp->timer_delay);
1427                 fsp->timer.function = fc_fcp_timeout;
1428                 fc_fcp_timer_set(fsp, fsp->timer_delay);
1429                 goto unlock;
1430         }
1431         FC_FCP_DBG(fsp, "fcp timeout, delay %d flags %x state %x\n",
1432                    fsp->timer_delay, rpriv->flags, fsp->state);
1433         fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1434
1435         if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1436                 fc_fcp_rec(fsp);
1437         else if (fsp->state & FC_SRB_RCV_STATUS)
1438                 fc_fcp_complete_locked(fsp);
1439         else
1440                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1441         fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1442 unlock:
1443         fc_fcp_unlock_pkt(fsp);
1444 }
1445
1446 /**
1447  * fc_fcp_rec() - Send a REC ELS request
1448  * @fsp: The FCP packet to send the REC request on
1449  */
1450 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1451 {
1452         struct fc_lport *lport;
1453         struct fc_frame *fp;
1454         struct fc_rport *rport;
1455         struct fc_rport_libfc_priv *rpriv;
1456
1457         lport = fsp->lp;
1458         rport = fsp->rport;
1459         rpriv = rport->dd_data;
1460         if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1461                 fsp->status_code = FC_HRD_ERROR;
1462                 fsp->io_status = 0;
1463                 fc_fcp_complete_locked(fsp);
1464                 return;
1465         }
1466
1467         fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1468         if (!fp)
1469                 goto retry;
1470
1471         fr_seq(fp) = fsp->seq_ptr;
1472         fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1473                        rpriv->local_port->port_id, FC_TYPE_ELS,
1474                        FC_FCTL_REQ, 0);
1475         if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1476                                  fc_fcp_rec_resp, fsp,
1477                                  2 * lport->r_a_tov)) {
1478                 fc_fcp_pkt_hold(fsp);           /* hold while REC outstanding */
1479                 return;
1480         }
1481 retry:
1482         if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1483                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1484         else
1485                 fc_fcp_recovery(fsp, FC_TIMED_OUT);
1486 }
1487
1488 /**
1489  * fc_fcp_rec_resp() - Handler for REC ELS responses
1490  * @seq: The sequence the response is on
1491  * @fp:  The response frame
1492  * @arg: The FCP packet the response is on
1493  *
1494  * If the response is a reject then the scsi layer will handle
1495  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1496  * set the timeout and return. If the I/O was completed then complete the
1497  * exchange and tell the SCSI layer.
1498  */
1499 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1500 {
1501         struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1502         struct fc_els_rec_acc *recp;
1503         struct fc_els_ls_rjt *rjt;
1504         u32 e_stat;
1505         u8 opcode;
1506         u32 offset;
1507         enum dma_data_direction data_dir;
1508         enum fc_rctl r_ctl;
1509         struct fc_rport_libfc_priv *rpriv;
1510
1511         if (IS_ERR(fp)) {
1512                 fc_fcp_rec_error(fsp, fp);
1513                 return;
1514         }
1515
1516         if (fc_fcp_lock_pkt(fsp))
1517                 goto out;
1518
1519         fsp->recov_retry = 0;
1520         opcode = fc_frame_payload_op(fp);
1521         if (opcode == ELS_LS_RJT) {
1522                 rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1523                 switch (rjt->er_reason) {
1524                 default:
1525                         FC_FCP_DBG(fsp,
1526                                    "device %x invalid REC reject %d/%d\n",
1527                                    fsp->rport->port_id, rjt->er_reason,
1528                                    rjt->er_explan);
1529                         fallthrough;
1530                 case ELS_RJT_UNSUP:
1531                         FC_FCP_DBG(fsp, "device does not support REC\n");
1532                         rpriv = fsp->rport->dd_data;
1533                         /*
1534                          * if we do not spport RECs or got some bogus
1535                          * reason then resetup timer so we check for
1536                          * making progress.
1537                          */
1538                         rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1539                         break;
1540                 case ELS_RJT_LOGIC:
1541                 case ELS_RJT_UNAB:
1542                         FC_FCP_DBG(fsp, "device %x REC reject %d/%d\n",
1543                                    fsp->rport->port_id, rjt->er_reason,
1544                                    rjt->er_explan);
1545                         /*
1546                          * If response got lost or is stuck in the
1547                          * queue somewhere we have no idea if and when
1548                          * the response will be received. So quarantine
1549                          * the xid and retry the command.
1550                          */
1551                         if (rjt->er_explan == ELS_EXPL_OXID_RXID) {
1552                                 struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1553                                 ep->state |= FC_EX_QUARANTINE;
1554                                 fsp->state |= FC_SRB_ABORTED;
1555                                 fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1556                                 break;
1557                         }
1558                         fc_fcp_recovery(fsp, FC_TRANS_RESET);
1559                         break;
1560                 }
1561         } else if (opcode == ELS_LS_ACC) {
1562                 if (fsp->state & FC_SRB_ABORTED)
1563                         goto unlock_out;
1564
1565                 data_dir = fsp->cmd->sc_data_direction;
1566                 recp = fc_frame_payload_get(fp, sizeof(*recp));
1567                 offset = ntohl(recp->reca_fc4value);
1568                 e_stat = ntohl(recp->reca_e_stat);
1569
1570                 if (e_stat & ESB_ST_COMPLETE) {
1571
1572                         /*
1573                          * The exchange is complete.
1574                          *
1575                          * For output, we must've lost the response.
1576                          * For input, all data must've been sent.
1577                          * We lost may have lost the response
1578                          * (and a confirmation was requested) and maybe
1579                          * some data.
1580                          *
1581                          * If all data received, send SRR
1582                          * asking for response.  If partial data received,
1583                          * or gaps, SRR requests data at start of gap.
1584                          * Recovery via SRR relies on in-order-delivery.
1585                          */
1586                         if (data_dir == DMA_TO_DEVICE) {
1587                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1588                         } else if (fsp->xfer_contig_end == offset) {
1589                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1590                         } else {
1591                                 offset = fsp->xfer_contig_end;
1592                                 r_ctl = FC_RCTL_DD_SOL_DATA;
1593                         }
1594                         fc_fcp_srr(fsp, r_ctl, offset);
1595                 } else if (e_stat & ESB_ST_SEQ_INIT) {
1596                         /*
1597                          * The remote port has the initiative, so just
1598                          * keep waiting for it to complete.
1599                          */
1600                         fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1601                 } else {
1602
1603                         /*
1604                          * The exchange is incomplete, we have seq. initiative.
1605                          * Lost response with requested confirmation,
1606                          * lost confirmation, lost transfer ready or
1607                          * lost write data.
1608                          *
1609                          * For output, if not all data was received, ask
1610                          * for transfer ready to be repeated.
1611                          *
1612                          * If we received or sent all the data, send SRR to
1613                          * request response.
1614                          *
1615                          * If we lost a response, we may have lost some read
1616                          * data as well.
1617                          */
1618                         r_ctl = FC_RCTL_DD_SOL_DATA;
1619                         if (data_dir == DMA_TO_DEVICE) {
1620                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1621                                 if (offset < fsp->data_len)
1622                                         r_ctl = FC_RCTL_DD_DATA_DESC;
1623                         } else if (offset == fsp->xfer_contig_end) {
1624                                 r_ctl = FC_RCTL_DD_CMD_STATUS;
1625                         } else if (fsp->xfer_contig_end < offset) {
1626                                 offset = fsp->xfer_contig_end;
1627                         }
1628                         fc_fcp_srr(fsp, r_ctl, offset);
1629                 }
1630         }
1631 unlock_out:
1632         fc_fcp_unlock_pkt(fsp);
1633 out:
1634         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1635         fc_frame_free(fp);
1636 }
1637
1638 /**
1639  * fc_fcp_rec_error() - Handler for REC errors
1640  * @fsp: The FCP packet the error is on
1641  * @fp:  The REC frame
1642  */
1643 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1644 {
1645         int error = PTR_ERR(fp);
1646
1647         if (fc_fcp_lock_pkt(fsp))
1648                 goto out;
1649
1650         switch (error) {
1651         case -FC_EX_CLOSED:
1652                 FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange closed\n",
1653                            fsp, fsp->rport->port_id);
1654                 fc_fcp_retry_cmd(fsp, FC_ERROR);
1655                 break;
1656
1657         default:
1658                 FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1659                            fsp, fsp->rport->port_id, error);
1660                 fsp->status_code = FC_CMD_PLOGO;
1661                 fallthrough;
1662
1663         case -FC_EX_TIMEOUT:
1664                 /*
1665                  * Assume REC or LS_ACC was lost.
1666                  * The exchange manager will have aborted REC, so retry.
1667                  */
1668                 FC_FCP_DBG(fsp, "REC %p fid %6.6x exchange timeout retry %d/%d\n",
1669                            fsp, fsp->rport->port_id, fsp->recov_retry,
1670                            FC_MAX_RECOV_RETRY);
1671                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1672                         fc_fcp_rec(fsp);
1673                 else
1674                         fc_fcp_recovery(fsp, FC_ERROR);
1675                 break;
1676         }
1677         fc_fcp_unlock_pkt(fsp);
1678 out:
1679         fc_fcp_pkt_release(fsp);        /* drop hold for outstanding REC */
1680 }
1681
1682 /**
1683  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1684  * @fsp: The FCP pkt that needs to be aborted
1685  * @code: The FCP status code to set
1686  */
1687 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1688 {
1689         FC_FCP_DBG(fsp, "start recovery code %x\n", code);
1690         fsp->status_code = code;
1691         fsp->cdb_status = 0;
1692         fsp->io_status = 0;
1693         /*
1694          * if this fails then we let the scsi command timer fire and
1695          * scsi-ml escalate.
1696          */
1697         fc_fcp_send_abort(fsp);
1698 }
1699
1700 /**
1701  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1702  * @fsp:   The FCP packet the SRR is to be sent on
1703  * @r_ctl: The R_CTL field for the SRR request
1704  * @offset: The SRR relative offset
1705  * This is called after receiving status but insufficient data, or
1706  * when expecting status but the request has timed out.
1707  */
1708 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1709 {
1710         struct fc_lport *lport = fsp->lp;
1711         struct fc_rport *rport;
1712         struct fc_rport_libfc_priv *rpriv;
1713         struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1714         struct fc_seq *seq;
1715         struct fcp_srr *srr;
1716         struct fc_frame *fp;
1717
1718         rport = fsp->rport;
1719         rpriv = rport->dd_data;
1720
1721         if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1722             rpriv->rp_state != RPORT_ST_READY)
1723                 goto retry;                     /* shouldn't happen */
1724         fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1725         if (!fp)
1726                 goto retry;
1727
1728         srr = fc_frame_payload_get(fp, sizeof(*srr));
1729         memset(srr, 0, sizeof(*srr));
1730         srr->srr_op = ELS_SRR;
1731         srr->srr_ox_id = htons(ep->oxid);
1732         srr->srr_rx_id = htons(ep->rxid);
1733         srr->srr_r_ctl = r_ctl;
1734         srr->srr_rel_off = htonl(offset);
1735
1736         fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1737                        rpriv->local_port->port_id, FC_TYPE_FCP,
1738                        FC_FCTL_REQ, 0);
1739
1740         seq = fc_exch_seq_send(lport, fp, fc_fcp_srr_resp,
1741                                fc_fcp_pkt_destroy,
1742                                fsp, get_fsp_rec_tov(fsp));
1743         if (!seq)
1744                 goto retry;
1745
1746         fsp->recov_seq = seq;
1747         fsp->xfer_len = offset;
1748         fsp->xfer_contig_end = offset;
1749         fsp->state &= ~FC_SRB_RCV_STATUS;
1750         fc_fcp_pkt_hold(fsp);           /* hold for outstanding SRR */
1751         return;
1752 retry:
1753         fc_fcp_retry_cmd(fsp, FC_TRANS_RESET);
1754 }
1755
1756 /**
1757  * fc_fcp_srr_resp() - Handler for SRR response
1758  * @seq: The sequence the SRR is on
1759  * @fp:  The SRR frame
1760  * @arg: The FCP packet the SRR is on
1761  */
1762 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1763 {
1764         struct fc_fcp_pkt *fsp = arg;
1765         struct fc_frame_header *fh;
1766
1767         if (IS_ERR(fp)) {
1768                 fc_fcp_srr_error(fsp, fp);
1769                 return;
1770         }
1771
1772         if (fc_fcp_lock_pkt(fsp))
1773                 goto out;
1774
1775         fh = fc_frame_header_get(fp);
1776         /*
1777          * BUG? fc_fcp_srr_error calls fc_exch_done which would release
1778          * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1779          * then fc_exch_timeout would be sending an abort. The fc_exch_done
1780          * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1781          * an abort response though.
1782          */
1783         if (fh->fh_type == FC_TYPE_BLS) {
1784                 fc_fcp_unlock_pkt(fsp);
1785                 return;
1786         }
1787
1788         switch (fc_frame_payload_op(fp)) {
1789         case ELS_LS_ACC:
1790                 fsp->recov_retry = 0;
1791                 fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1792                 break;
1793         case ELS_LS_RJT:
1794         default:
1795                 fc_fcp_recovery(fsp, FC_ERROR);
1796                 break;
1797         }
1798         fc_fcp_unlock_pkt(fsp);
1799 out:
1800         fc_exch_done(seq);
1801         fc_frame_free(fp);
1802 }
1803
1804 /**
1805  * fc_fcp_srr_error() - Handler for SRR errors
1806  * @fsp: The FCP packet that the SRR error is on
1807  * @fp:  The SRR frame
1808  */
1809 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1810 {
1811         if (fc_fcp_lock_pkt(fsp))
1812                 goto out;
1813         switch (PTR_ERR(fp)) {
1814         case -FC_EX_TIMEOUT:
1815                 FC_FCP_DBG(fsp, "SRR timeout, retries %d\n", fsp->recov_retry);
1816                 if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1817                         fc_fcp_rec(fsp);
1818                 else
1819                         fc_fcp_recovery(fsp, FC_TIMED_OUT);
1820                 break;
1821         case -FC_EX_CLOSED:                     /* e.g., link failure */
1822                 FC_FCP_DBG(fsp, "SRR error, exchange closed\n");
1823                 fallthrough;
1824         default:
1825                 fc_fcp_retry_cmd(fsp, FC_ERROR);
1826                 break;
1827         }
1828         fc_fcp_unlock_pkt(fsp);
1829 out:
1830         fc_exch_done(fsp->recov_seq);
1831 }
1832
1833 /**
1834  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1835  * @lport: The local port to be checked
1836  */
1837 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1838 {
1839         /* lock ? */
1840         return (lport->state == LPORT_ST_READY) &&
1841                 lport->link_up && !lport->qfull;
1842 }
1843
1844 /**
1845  * fc_queuecommand() - The queuecommand function of the SCSI template
1846  * @shost: The Scsi_Host that the command was issued to
1847  * @sc_cmd:   The scsi_cmnd to be executed
1848  *
1849  * This is the i/o strategy routine, called by the SCSI layer.
1850  */
1851 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1852 {
1853         struct fc_lport *lport = shost_priv(shost);
1854         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1855         struct fc_fcp_pkt *fsp;
1856         int rval;
1857         int rc = 0;
1858
1859         rval = fc_remote_port_chkready(rport);
1860         if (rval) {
1861                 sc_cmd->result = rval;
1862                 scsi_done(sc_cmd);
1863                 return 0;
1864         }
1865
1866         if (!*(struct fc_remote_port **)rport->dd_data) {
1867                 /*
1868                  * rport is transitioning from blocked/deleted to
1869                  * online
1870                  */
1871                 sc_cmd->result = DID_IMM_RETRY << 16;
1872                 scsi_done(sc_cmd);
1873                 goto out;
1874         }
1875
1876         if (!fc_fcp_lport_queue_ready(lport)) {
1877                 if (lport->qfull) {
1878                         if (fc_fcp_can_queue_ramp_down(lport))
1879                                 shost_printk(KERN_ERR, lport->host,
1880                                              "libfc: queue full, "
1881                                              "reducing can_queue to %d.\n",
1882                                              lport->host->can_queue);
1883                 }
1884                 rc = SCSI_MLQUEUE_HOST_BUSY;
1885                 goto out;
1886         }
1887
1888         fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1889         if (fsp == NULL) {
1890                 rc = SCSI_MLQUEUE_HOST_BUSY;
1891                 goto out;
1892         }
1893
1894         /*
1895          * build the libfc request pkt
1896          */
1897         fsp->cmd = sc_cmd;      /* save the cmd */
1898         fsp->rport = rport;     /* set the remote port ptr */
1899
1900         /*
1901          * set up the transfer length
1902          */
1903         fsp->data_len = scsi_bufflen(sc_cmd);
1904         fsp->xfer_len = 0;
1905
1906         /*
1907          * setup the data direction
1908          */
1909         if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1910                 fsp->req_flags = FC_SRB_READ;
1911                 this_cpu_inc(lport->stats->InputRequests);
1912                 this_cpu_add(lport->stats->InputBytes, fsp->data_len);
1913         } else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1914                 fsp->req_flags = FC_SRB_WRITE;
1915                 this_cpu_inc(lport->stats->OutputRequests);
1916                 this_cpu_add(lport->stats->OutputBytes, fsp->data_len);
1917         } else {
1918                 fsp->req_flags = 0;
1919                 this_cpu_inc(lport->stats->ControlRequests);
1920         }
1921
1922         /*
1923          * send it to the lower layer
1924          * if we get -1 return then put the request in the pending
1925          * queue.
1926          */
1927         rval = fc_fcp_pkt_send(lport, fsp);
1928         if (rval != 0) {
1929                 fsp->state = FC_SRB_FREE;
1930                 fc_fcp_pkt_release(fsp);
1931                 rc = SCSI_MLQUEUE_HOST_BUSY;
1932         }
1933 out:
1934         return rc;
1935 }
1936 EXPORT_SYMBOL(fc_queuecommand);
1937
1938 /**
1939  * fc_io_compl() - Handle responses for completed commands
1940  * @fsp: The FCP packet that is complete
1941  *
1942  * Translates fcp_pkt errors to a Linux SCSI errors.
1943  * The fcp packet lock must be held when calling.
1944  */
1945 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1946 {
1947         struct fc_fcp_internal *si;
1948         struct scsi_cmnd *sc_cmd;
1949         struct fc_lport *lport;
1950         unsigned long flags;
1951
1952         /* release outstanding ddp context */
1953         fc_fcp_ddp_done(fsp);
1954
1955         fsp->state |= FC_SRB_COMPL;
1956         if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1957                 spin_unlock_bh(&fsp->scsi_pkt_lock);
1958                 del_timer_sync(&fsp->timer);
1959                 spin_lock_bh(&fsp->scsi_pkt_lock);
1960         }
1961
1962         lport = fsp->lp;
1963         si = fc_get_scsi_internal(lport);
1964
1965         /*
1966          * if can_queue ramp down is done then try can_queue ramp up
1967          * since commands are completing now.
1968          */
1969         if (si->last_can_queue_ramp_down_time)
1970                 fc_fcp_can_queue_ramp_up(lport);
1971
1972         sc_cmd = fsp->cmd;
1973         libfc_priv(sc_cmd)->status = fsp->cdb_status;
1974         switch (fsp->status_code) {
1975         case FC_COMPLETE:
1976                 if (fsp->cdb_status == 0) {
1977                         /*
1978                          * good I/O status
1979                          */
1980                         sc_cmd->result = DID_OK << 16;
1981                         if (fsp->scsi_resid)
1982                                 libfc_priv(sc_cmd)->resid_len = fsp->scsi_resid;
1983                 } else {
1984                         /*
1985                          * transport level I/O was ok but scsi
1986                          * has non zero status
1987                          */
1988                         sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1989                 }
1990                 break;
1991         case FC_ERROR:
1992                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1993                            "due to FC_ERROR\n");
1994                 sc_cmd->result = DID_ERROR << 16;
1995                 break;
1996         case FC_DATA_UNDRUN:
1997                 if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1998                         /*
1999                          * scsi status is good but transport level
2000                          * underrun.
2001                          */
2002                         if (fsp->state & FC_SRB_RCV_STATUS) {
2003                                 sc_cmd->result = DID_OK << 16;
2004                         } else {
2005                                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
2006                                            " due to FC_DATA_UNDRUN (trans)\n");
2007                                 sc_cmd->result = DID_ERROR << 16;
2008                         }
2009                 } else {
2010                         /*
2011                          * scsi got underrun, this is an error
2012                          */
2013                         FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2014                                    "due to FC_DATA_UNDRUN (scsi)\n");
2015                         libfc_priv(sc_cmd)->resid_len = fsp->scsi_resid;
2016                         sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2017                 }
2018                 break;
2019         case FC_DATA_OVRRUN:
2020                 /*
2021                  * overrun is an error
2022                  */
2023                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2024                            "due to FC_DATA_OVRRUN\n");
2025                 sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
2026                 break;
2027         case FC_CMD_ABORTED:
2028                 if (host_byte(sc_cmd->result) == DID_TIME_OUT)
2029                         FC_FCP_DBG(fsp, "Returning DID_TIME_OUT to scsi-ml "
2030                                    "due to FC_CMD_ABORTED\n");
2031                 else {
2032                         FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2033                                    "due to FC_CMD_ABORTED\n");
2034                         set_host_byte(sc_cmd, DID_ERROR);
2035                 }
2036                 sc_cmd->result |= fsp->io_status;
2037                 break;
2038         case FC_CMD_RESET:
2039                 FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
2040                            "due to FC_CMD_RESET\n");
2041                 sc_cmd->result = (DID_RESET << 16);
2042                 break;
2043         case FC_TRANS_RESET:
2044                 FC_FCP_DBG(fsp, "Returning DID_SOFT_ERROR to scsi-ml "
2045                            "due to FC_TRANS_RESET\n");
2046                 sc_cmd->result = (DID_SOFT_ERROR << 16);
2047                 break;
2048         case FC_HRD_ERROR:
2049                 FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
2050                            "due to FC_HRD_ERROR\n");
2051                 sc_cmd->result = (DID_NO_CONNECT << 16);
2052                 break;
2053         case FC_CRC_ERROR:
2054                 FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
2055                            "due to FC_CRC_ERROR\n");
2056                 sc_cmd->result = (DID_PARITY << 16);
2057                 break;
2058         case FC_TIMED_OUT:
2059                 FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
2060                            "due to FC_TIMED_OUT\n");
2061                 sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
2062                 break;
2063         default:
2064                 FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
2065                            "due to unknown error\n");
2066                 sc_cmd->result = (DID_ERROR << 16);
2067                 break;
2068         }
2069
2070         if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
2071                 sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
2072
2073         spin_lock_irqsave(&si->scsi_queue_lock, flags);
2074         list_del(&fsp->list);
2075         libfc_priv(sc_cmd)->fsp = NULL;
2076         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2077         scsi_done(sc_cmd);
2078
2079         /* release ref from initial allocation in queue command */
2080         fc_fcp_pkt_release(fsp);
2081 }
2082
2083 /**
2084  * fc_eh_abort() - Abort a command
2085  * @sc_cmd: The SCSI command to abort
2086  *
2087  * From SCSI host template.
2088  * Send an ABTS to the target device and wait for the response.
2089  */
2090 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2091 {
2092         struct fc_fcp_pkt *fsp;
2093         struct fc_lport *lport;
2094         struct fc_fcp_internal *si;
2095         int rc = FAILED;
2096         unsigned long flags;
2097         int rval;
2098
2099         rval = fc_block_scsi_eh(sc_cmd);
2100         if (rval)
2101                 return rval;
2102
2103         lport = shost_priv(sc_cmd->device->host);
2104         if (lport->state != LPORT_ST_READY)
2105                 return rc;
2106         else if (!lport->link_up)
2107                 return rc;
2108
2109         si = fc_get_scsi_internal(lport);
2110         spin_lock_irqsave(&si->scsi_queue_lock, flags);
2111         fsp = libfc_priv(sc_cmd)->fsp;
2112         if (!fsp) {
2113                 /* command completed while scsi eh was setting up */
2114                 spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2115                 return SUCCESS;
2116         }
2117         /* grab a ref so the fsp and sc_cmd cannot be released from under us */
2118         fc_fcp_pkt_hold(fsp);
2119         spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2120
2121         if (fc_fcp_lock_pkt(fsp)) {
2122                 /* completed while we were waiting for timer to be deleted */
2123                 rc = SUCCESS;
2124                 goto release_pkt;
2125         }
2126
2127         rc = fc_fcp_pkt_abort(fsp);
2128         fc_fcp_unlock_pkt(fsp);
2129
2130 release_pkt:
2131         fc_fcp_pkt_release(fsp);
2132         return rc;
2133 }
2134 EXPORT_SYMBOL(fc_eh_abort);
2135
2136 /**
2137  * fc_eh_device_reset() - Reset a single LUN
2138  * @sc_cmd: The SCSI command which identifies the device whose
2139  *          LUN is to be reset
2140  *
2141  * Set from SCSI host template.
2142  */
2143 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2144 {
2145         struct fc_lport *lport;
2146         struct fc_fcp_pkt *fsp;
2147         struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2148         int rc = FAILED;
2149         int rval;
2150
2151         rval = fc_block_scsi_eh(sc_cmd);
2152         if (rval)
2153                 return rval;
2154
2155         lport = shost_priv(sc_cmd->device->host);
2156
2157         if (lport->state != LPORT_ST_READY)
2158                 return rc;
2159
2160         FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2161
2162         fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2163         if (fsp == NULL) {
2164                 printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2165                 goto out;
2166         }
2167
2168         /*
2169          * Build the libfc request pkt. Do not set the scsi cmnd, because
2170          * the sc passed in is not setup for execution like when sent
2171          * through the queuecommand callout.
2172          */
2173         fsp->rport = rport;     /* set the remote port ptr */
2174
2175         /*
2176          * flush outstanding commands
2177          */
2178         rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2179         fsp->state = FC_SRB_FREE;
2180         fc_fcp_pkt_release(fsp);
2181
2182 out:
2183         return rc;
2184 }
2185 EXPORT_SYMBOL(fc_eh_device_reset);
2186
2187 /**
2188  * fc_eh_host_reset() - Reset a Scsi_Host.
2189  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2190  */
2191 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2192 {
2193         struct Scsi_Host *shost = sc_cmd->device->host;
2194         struct fc_lport *lport = shost_priv(shost);
2195         unsigned long wait_tmo;
2196
2197         FC_SCSI_DBG(lport, "Resetting host\n");
2198
2199         fc_lport_reset(lport);
2200         wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2201         while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2202                                                                wait_tmo))
2203                 msleep(1000);
2204
2205         if (fc_fcp_lport_queue_ready(lport)) {
2206                 shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2207                              "on port (%6.6x)\n", lport->port_id);
2208                 return SUCCESS;
2209         } else {
2210                 shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2211                              "port (%6.6x) is not ready.\n",
2212                              lport->port_id);
2213                 return FAILED;
2214         }
2215 }
2216 EXPORT_SYMBOL(fc_eh_host_reset);
2217
2218 /**
2219  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2220  * @sdev: The SCSI device that identifies the SCSI host
2221  *
2222  * Configures queue depth based on host's cmd_per_len. If not set
2223  * then we use the libfc default.
2224  */
2225 int fc_slave_alloc(struct scsi_device *sdev)
2226 {
2227         struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2228
2229         if (!rport || fc_remote_port_chkready(rport))
2230                 return -ENXIO;
2231
2232         scsi_change_queue_depth(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2233         return 0;
2234 }
2235 EXPORT_SYMBOL(fc_slave_alloc);
2236
2237 /**
2238  * fc_fcp_destroy() - Tear down the FCP layer for a given local port
2239  * @lport: The local port that no longer needs the FCP layer
2240  */
2241 void fc_fcp_destroy(struct fc_lport *lport)
2242 {
2243         struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2244
2245         if (!list_empty(&si->scsi_pkt_queue))
2246                 printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2247                        "port (%6.6x)\n", lport->port_id);
2248
2249         mempool_destroy(si->scsi_pkt_pool);
2250         kfree(si);
2251         lport->scsi_priv = NULL;
2252 }
2253 EXPORT_SYMBOL(fc_fcp_destroy);
2254
2255 int fc_setup_fcp(void)
2256 {
2257         int rc = 0;
2258
2259         scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2260                                             sizeof(struct fc_fcp_pkt),
2261                                             0, SLAB_HWCACHE_ALIGN, NULL);
2262         if (!scsi_pkt_cachep) {
2263                 printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2264                        "module load failed!");
2265                 rc = -ENOMEM;
2266         }
2267
2268         return rc;
2269 }
2270
2271 void fc_destroy_fcp(void)
2272 {
2273         kmem_cache_destroy(scsi_pkt_cachep);
2274 }
2275
2276 /**
2277  * fc_fcp_init() - Initialize the FCP layer for a local port
2278  * @lport: The local port to initialize the exchange layer for
2279  */
2280 int fc_fcp_init(struct fc_lport *lport)
2281 {
2282         int rc;
2283         struct fc_fcp_internal *si;
2284
2285         if (!lport->tt.fcp_cmd_send)
2286                 lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2287
2288         if (!lport->tt.fcp_cleanup)
2289                 lport->tt.fcp_cleanup = fc_fcp_cleanup;
2290
2291         if (!lport->tt.fcp_abort_io)
2292                 lport->tt.fcp_abort_io = fc_fcp_abort_io;
2293
2294         si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2295         if (!si)
2296                 return -ENOMEM;
2297         lport->scsi_priv = si;
2298         si->max_can_queue = lport->host->can_queue;
2299         INIT_LIST_HEAD(&si->scsi_pkt_queue);
2300         spin_lock_init(&si->scsi_queue_lock);
2301
2302         si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2303         if (!si->scsi_pkt_pool) {
2304                 rc = -ENOMEM;
2305                 goto free_internal;
2306         }
2307         return 0;
2308
2309 free_internal:
2310         kfree(si);
2311         return rc;
2312 }
2313 EXPORT_SYMBOL(fc_fcp_init);
This page took 0.168664 seconds and 4 git commands to generate.