2 * BSS client mode implementation
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
8 * Copyright 2013-2014 Intel Mobile Communications GmbH
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/delay.h>
16 #include <linux/if_ether.h>
17 #include <linux/skbuff.h>
18 #include <linux/if_arp.h>
19 #include <linux/etherdevice.h>
20 #include <linux/moduleparam.h>
21 #include <linux/rtnetlink.h>
22 #include <linux/pm_qos.h>
23 #include <linux/crc32.h>
24 #include <linux/slab.h>
25 #include <linux/export.h>
26 #include <net/mac80211.h>
27 #include <asm/unaligned.h>
29 #include "ieee80211_i.h"
30 #include "driver-ops.h"
34 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
35 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
36 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
37 #define IEEE80211_AUTH_MAX_TRIES 3
38 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
39 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
40 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
41 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
42 #define IEEE80211_ASSOC_MAX_TRIES 3
44 static int max_nullfunc_tries = 2;
45 module_param(max_nullfunc_tries, int, 0644);
46 MODULE_PARM_DESC(max_nullfunc_tries,
47 "Maximum nullfunc tx tries before disconnecting (reason 4).");
49 static int max_probe_tries = 5;
50 module_param(max_probe_tries, int, 0644);
51 MODULE_PARM_DESC(max_probe_tries,
52 "Maximum probe tries before disconnecting (reason 4).");
55 * Beacon loss timeout is calculated as N frames times the
56 * advertised beacon interval. This may need to be somewhat
57 * higher than what hardware might detect to account for
58 * delays in the host processing frames. But since we also
59 * probe on beacon miss before declaring the connection lost
60 * default to what we want.
62 static int beacon_loss_count = 7;
63 module_param(beacon_loss_count, int, 0644);
64 MODULE_PARM_DESC(beacon_loss_count,
65 "Number of beacon intervals before we decide beacon was lost.");
68 * Time the connection can be idle before we probe
69 * it to see if we can still talk to the AP.
71 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
73 * Time we wait for a probe response after sending
74 * a probe request because of beacon loss or for
75 * checking the connection still works.
77 static int probe_wait_ms = 500;
78 module_param(probe_wait_ms, int, 0644);
79 MODULE_PARM_DESC(probe_wait_ms,
80 "Maximum time(ms) to wait for probe response"
81 " before disconnecting (reason 4).");
84 * Weight given to the latest Beacon frame when calculating average signal
85 * strength for Beacon frames received in the current BSS. This must be
88 #define IEEE80211_SIGNAL_AVE_WEIGHT 3
91 * How many Beacon frames need to have been used in average signal strength
92 * before starting to indicate signal change events.
94 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
97 * We can have multiple work items (and connection probing)
98 * scheduling this timer, but we need to take care to only
99 * reschedule it when it should fire _earlier_ than it was
100 * asked for before, or if it's not pending right now. This
101 * function ensures that. Note that it then is required to
102 * run this function for all timeouts after the first one
103 * has happened -- the work that runs from this timer will
106 static void run_again(struct ieee80211_sub_if_data *sdata,
107 unsigned long timeout)
109 sdata_assert_lock(sdata);
111 if (!timer_pending(&sdata->u.mgd.timer) ||
112 time_before(timeout, sdata->u.mgd.timer.expires))
113 mod_timer(&sdata->u.mgd.timer, timeout);
116 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
118 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
121 if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
124 mod_timer(&sdata->u.mgd.bcn_mon_timer,
125 round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
128 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
130 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
132 if (unlikely(!sdata->u.mgd.associated))
135 ifmgd->probe_send_count = 0;
137 if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
140 mod_timer(&sdata->u.mgd.conn_mon_timer,
141 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
144 static int ecw2cw(int ecw)
146 return (1 << ecw) - 1;
150 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
151 struct ieee80211_supported_band *sband,
152 struct ieee80211_channel *channel,
153 const struct ieee80211_ht_cap *ht_cap,
154 const struct ieee80211_ht_operation *ht_oper,
155 const struct ieee80211_vht_operation *vht_oper,
156 struct cfg80211_chan_def *chandef, bool tracking)
158 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
159 struct cfg80211_chan_def vht_chandef;
160 struct ieee80211_sta_ht_cap sta_ht_cap;
163 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
164 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
166 chandef->chan = channel;
167 chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
168 chandef->center_freq1 = channel->center_freq;
169 chandef->center_freq2 = 0;
171 if (!ht_cap || !ht_oper || !sta_ht_cap.ht_supported) {
172 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
176 chandef->width = NL80211_CHAN_WIDTH_20;
178 if (!(ht_cap->cap_info &
179 cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40))) {
180 ret = IEEE80211_STA_DISABLE_40MHZ;
181 vht_chandef = *chandef;
185 ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
187 /* check that channel matches the right operating channel */
188 if (!tracking && channel->center_freq != ht_cfreq) {
190 * It's possible that some APs are confused here;
191 * Netgear WNDR3700 sometimes reports 4 higher than
192 * the actual channel in association responses, but
193 * since we look at probe response/beacon data here
197 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
198 channel->center_freq, ht_cfreq,
199 ht_oper->primary_chan, channel->band);
200 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
204 /* check 40 MHz support, if we have it */
205 if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
206 switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
207 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
208 chandef->width = NL80211_CHAN_WIDTH_40;
209 chandef->center_freq1 += 10;
211 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
212 chandef->width = NL80211_CHAN_WIDTH_40;
213 chandef->center_freq1 -= 10;
217 /* 40 MHz (and 80 MHz) must be supported for VHT */
218 ret = IEEE80211_STA_DISABLE_VHT;
219 /* also mark 40 MHz disabled */
220 ret |= IEEE80211_STA_DISABLE_40MHZ;
224 if (!vht_oper || !sband->vht_cap.vht_supported) {
225 ret = IEEE80211_STA_DISABLE_VHT;
229 vht_chandef.chan = channel;
230 vht_chandef.center_freq1 =
231 ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx,
233 vht_chandef.center_freq2 = 0;
235 switch (vht_oper->chan_width) {
236 case IEEE80211_VHT_CHANWIDTH_USE_HT:
237 vht_chandef.width = chandef->width;
238 vht_chandef.center_freq1 = chandef->center_freq1;
240 case IEEE80211_VHT_CHANWIDTH_80MHZ:
241 vht_chandef.width = NL80211_CHAN_WIDTH_80;
243 case IEEE80211_VHT_CHANWIDTH_160MHZ:
244 vht_chandef.width = NL80211_CHAN_WIDTH_160;
246 case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
247 vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
248 vht_chandef.center_freq2 =
249 ieee80211_channel_to_frequency(
250 vht_oper->center_freq_seg2_idx,
254 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
256 "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
257 vht_oper->chan_width);
258 ret = IEEE80211_STA_DISABLE_VHT;
262 if (!cfg80211_chandef_valid(&vht_chandef)) {
263 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
265 "AP VHT information is invalid, disable VHT\n");
266 ret = IEEE80211_STA_DISABLE_VHT;
270 if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
275 if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
276 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
278 "AP VHT information doesn't match HT, disable VHT\n");
279 ret = IEEE80211_STA_DISABLE_VHT;
283 *chandef = vht_chandef;
289 * When tracking the current AP, don't do any further checks if the
290 * new chandef is identical to the one we're currently using for the
291 * connection. This keeps us from playing ping-pong with regulatory,
292 * without it the following can happen (for example):
293 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
294 * - AP advertises regdom US
295 * - CRDA loads regdom US with 80 MHz prohibited (old database)
296 * - the code below detects an unsupported channel, downgrades, and
297 * we disconnect from the AP in the caller
298 * - disconnect causes CRDA to reload world regdomain and the game
300 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
302 * It seems possible that there are still scenarios with CSA or real
303 * bandwidth changes where a this could happen, but those cases are
304 * less common and wouldn't completely prevent using the AP.
307 cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
310 /* don't print the message below for VHT mismatch if VHT is disabled */
311 if (ret & IEEE80211_STA_DISABLE_VHT)
312 vht_chandef = *chandef;
315 * Ignore the DISABLED flag when we're already connected and only
316 * tracking the APs beacon for bandwidth changes - otherwise we
317 * might get disconnected here if we connect to an AP, update our
318 * regulatory information based on the AP's country IE and the
319 * information we have is wrong/outdated and disables the channel
320 * that we're actually using for the connection to the AP.
322 while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
324 IEEE80211_CHAN_DISABLED)) {
325 if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
326 ret = IEEE80211_STA_DISABLE_HT |
327 IEEE80211_STA_DISABLE_VHT;
331 ret |= ieee80211_chandef_downgrade(chandef);
334 if (chandef->width != vht_chandef.width && !tracking)
336 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
338 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
342 static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
343 struct sta_info *sta,
344 const struct ieee80211_ht_cap *ht_cap,
345 const struct ieee80211_ht_operation *ht_oper,
346 const struct ieee80211_vht_operation *vht_oper,
347 const u8 *bssid, u32 *changed)
349 struct ieee80211_local *local = sdata->local;
350 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
351 struct ieee80211_supported_band *sband;
352 struct ieee80211_channel *chan;
353 struct cfg80211_chan_def chandef;
356 enum ieee80211_sta_rx_bandwidth new_sta_bw;
359 /* if HT was/is disabled, don't track any bandwidth changes */
360 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
363 /* don't check VHT if we associated as non-VHT station */
364 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
367 if (WARN_ON_ONCE(!sta))
371 * if bss configuration changed store the new one -
372 * this may be applicable even if channel is identical
374 ht_opmode = le16_to_cpu(ht_oper->operation_mode);
375 if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
376 *changed |= BSS_CHANGED_HT;
377 sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
380 chan = sdata->vif.bss_conf.chandef.chan;
381 sband = local->hw.wiphy->bands[chan->band];
383 /* calculate new channel (type) based on HT/VHT operation IEs */
384 flags = ieee80211_determine_chantype(sdata, sband, chan,
385 ht_cap, ht_oper, vht_oper,
389 * Downgrade the new channel if we associated with restricted
390 * capabilities. For example, if we associated as a 20 MHz STA
391 * to a 40 MHz AP (due to regulatory, capabilities or config
392 * reasons) then switching to a 40 MHz channel now won't do us
393 * any good -- we couldn't use it with the AP.
395 if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
396 chandef.width == NL80211_CHAN_WIDTH_80P80)
397 flags |= ieee80211_chandef_downgrade(&chandef);
398 if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
399 chandef.width == NL80211_CHAN_WIDTH_160)
400 flags |= ieee80211_chandef_downgrade(&chandef);
401 if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
402 chandef.width > NL80211_CHAN_WIDTH_20)
403 flags |= ieee80211_chandef_downgrade(&chandef);
405 if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
409 "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
410 ifmgd->bssid, chandef.chan->center_freq, chandef.width,
411 chandef.center_freq1, chandef.center_freq2);
413 if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
414 IEEE80211_STA_DISABLE_VHT |
415 IEEE80211_STA_DISABLE_40MHZ |
416 IEEE80211_STA_DISABLE_80P80MHZ |
417 IEEE80211_STA_DISABLE_160MHZ)) ||
418 !cfg80211_chandef_valid(&chandef)) {
420 "AP %pM changed bandwidth in a way we can't support - disconnect\n",
425 switch (chandef.width) {
426 case NL80211_CHAN_WIDTH_20_NOHT:
427 case NL80211_CHAN_WIDTH_20:
428 new_sta_bw = IEEE80211_STA_RX_BW_20;
430 case NL80211_CHAN_WIDTH_40:
431 new_sta_bw = IEEE80211_STA_RX_BW_40;
433 case NL80211_CHAN_WIDTH_80:
434 new_sta_bw = IEEE80211_STA_RX_BW_80;
436 case NL80211_CHAN_WIDTH_80P80:
437 case NL80211_CHAN_WIDTH_160:
438 new_sta_bw = IEEE80211_STA_RX_BW_160;
444 if (new_sta_bw > sta->cur_max_bandwidth)
445 new_sta_bw = sta->cur_max_bandwidth;
447 if (new_sta_bw < sta->sta.bandwidth) {
448 sta->sta.bandwidth = new_sta_bw;
449 rate_control_rate_update(local, sband, sta,
450 IEEE80211_RC_BW_CHANGED);
453 ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
456 "AP %pM changed bandwidth to incompatible one - disconnect\n",
461 if (new_sta_bw > sta->sta.bandwidth) {
462 sta->sta.bandwidth = new_sta_bw;
463 rate_control_rate_update(local, sband, sta,
464 IEEE80211_RC_BW_CHANGED);
470 /* frame sending functions */
472 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
473 struct sk_buff *skb, u8 ap_ht_param,
474 struct ieee80211_supported_band *sband,
475 struct ieee80211_channel *channel,
476 enum ieee80211_smps_mode smps)
479 u32 flags = channel->flags;
481 struct ieee80211_sta_ht_cap ht_cap;
483 BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
485 memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
486 ieee80211_apply_htcap_overrides(sdata, &ht_cap);
488 /* determine capability flags */
491 switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
492 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
493 if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
494 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
495 cap &= ~IEEE80211_HT_CAP_SGI_40;
498 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
499 if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
500 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
501 cap &= ~IEEE80211_HT_CAP_SGI_40;
507 * If 40 MHz was disabled associate as though we weren't
508 * capable of 40 MHz -- some broken APs will never fall
509 * back to trying to transmit in 20 MHz.
511 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) {
512 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
513 cap &= ~IEEE80211_HT_CAP_SGI_40;
516 /* set SM PS mode properly */
517 cap &= ~IEEE80211_HT_CAP_SM_PS;
519 case IEEE80211_SMPS_AUTOMATIC:
520 case IEEE80211_SMPS_NUM_MODES:
522 case IEEE80211_SMPS_OFF:
523 cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
524 IEEE80211_HT_CAP_SM_PS_SHIFT;
526 case IEEE80211_SMPS_STATIC:
527 cap |= WLAN_HT_CAP_SM_PS_STATIC <<
528 IEEE80211_HT_CAP_SM_PS_SHIFT;
530 case IEEE80211_SMPS_DYNAMIC:
531 cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
532 IEEE80211_HT_CAP_SM_PS_SHIFT;
536 /* reserve and fill IE */
537 pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
538 ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
541 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
543 struct ieee80211_supported_band *sband,
544 struct ieee80211_vht_cap *ap_vht_cap)
548 struct ieee80211_sta_vht_cap vht_cap;
549 u32 mask, ap_bf_sts, our_bf_sts;
551 BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
553 memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
554 ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
556 /* determine capability flags */
559 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) {
560 u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
562 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
563 if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
564 bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
565 cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
568 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) {
569 cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
570 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
574 * Some APs apparently get confused if our capabilities are better
575 * than theirs, so restrict what we advertise in the assoc request.
577 if (!(ap_vht_cap->vht_cap_info &
578 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
579 cap &= ~IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
581 mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
583 ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
584 our_bf_sts = cap & mask;
586 if (ap_bf_sts < our_bf_sts) {
591 /* reserve and fill IE */
592 pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
593 ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
596 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
598 struct ieee80211_local *local = sdata->local;
599 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
600 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
602 struct ieee80211_mgmt *mgmt;
604 size_t offset = 0, noffset;
605 int i, count, rates_len, supp_rates_len, shift;
607 struct ieee80211_supported_band *sband;
608 struct ieee80211_chanctx_conf *chanctx_conf;
609 struct ieee80211_channel *chan;
610 u32 rate_flags, rates = 0;
612 sdata_assert_lock(sdata);
615 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
616 if (WARN_ON(!chanctx_conf)) {
620 chan = chanctx_conf->def.chan;
621 rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
623 sband = local->hw.wiphy->bands[chan->band];
624 shift = ieee80211_vif_get_shift(&sdata->vif);
626 if (assoc_data->supp_rates_len) {
628 * Get all rates supported by the device and the AP as
629 * some APs don't like getting a superset of their rates
630 * in the association request (e.g. D-Link DAP 1353 in
633 rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband,
634 assoc_data->supp_rates,
635 assoc_data->supp_rates_len,
639 * In case AP not provide any supported rates information
640 * before association, we send information element(s) with
641 * all rates that we support.
644 for (i = 0; i < sband->n_bitrates; i++) {
645 if ((rate_flags & sband->bitrates[i].flags)
653 skb = alloc_skb(local->hw.extra_tx_headroom +
654 sizeof(*mgmt) + /* bit too much but doesn't matter */
655 2 + assoc_data->ssid_len + /* SSID */
656 4 + rates_len + /* (extended) rates */
657 4 + /* power capability */
658 2 + 2 * sband->n_channels + /* supported channels */
659 2 + sizeof(struct ieee80211_ht_cap) + /* HT */
660 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */
661 assoc_data->ie_len + /* extra IEs */
667 skb_reserve(skb, local->hw.extra_tx_headroom);
669 capab = WLAN_CAPABILITY_ESS;
671 if (sband->band == IEEE80211_BAND_2GHZ) {
672 if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE))
673 capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
674 if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE))
675 capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
678 if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY)
679 capab |= WLAN_CAPABILITY_PRIVACY;
681 if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
682 (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT))
683 capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
685 if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
686 capab |= WLAN_CAPABILITY_RADIO_MEASURE;
688 mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
690 memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN);
691 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
692 memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
694 if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
696 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
697 IEEE80211_STYPE_REASSOC_REQ);
698 mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
699 mgmt->u.reassoc_req.listen_interval =
700 cpu_to_le16(local->hw.conf.listen_interval);
701 memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
705 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
706 IEEE80211_STYPE_ASSOC_REQ);
707 mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
708 mgmt->u.assoc_req.listen_interval =
709 cpu_to_le16(local->hw.conf.listen_interval);
713 pos = skb_put(skb, 2 + assoc_data->ssid_len);
714 *pos++ = WLAN_EID_SSID;
715 *pos++ = assoc_data->ssid_len;
716 memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
718 /* add all rates which were marked to be used above */
719 supp_rates_len = rates_len;
720 if (supp_rates_len > 8)
723 pos = skb_put(skb, supp_rates_len + 2);
724 *pos++ = WLAN_EID_SUPP_RATES;
725 *pos++ = supp_rates_len;
728 for (i = 0; i < sband->n_bitrates; i++) {
729 if (BIT(i) & rates) {
730 int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
738 if (rates_len > count) {
739 pos = skb_put(skb, rates_len - count + 2);
740 *pos++ = WLAN_EID_EXT_SUPP_RATES;
741 *pos++ = rates_len - count;
743 for (i++; i < sband->n_bitrates; i++) {
744 if (BIT(i) & rates) {
746 rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
753 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
754 capab & WLAN_CAPABILITY_RADIO_MEASURE) {
755 pos = skb_put(skb, 4);
756 *pos++ = WLAN_EID_PWR_CAPABILITY;
758 *pos++ = 0; /* min tx power */
760 *pos++ = ieee80211_chandef_max_power(&chanctx_conf->def);
763 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
764 /* TODO: get this in reg domain format */
765 pos = skb_put(skb, 2 * sband->n_channels + 2);
766 *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
767 *pos++ = 2 * sband->n_channels;
768 for (i = 0; i < sband->n_channels; i++) {
769 *pos++ = ieee80211_frequency_to_channel(
770 sband->channels[i].center_freq);
771 *pos++ = 1; /* one channel in the subband*/
775 /* if present, add any custom IEs that go before HT */
776 if (assoc_data->ie_len) {
777 static const u8 before_ht[] = {
780 WLAN_EID_EXT_SUPP_RATES,
781 WLAN_EID_PWR_CAPABILITY,
782 WLAN_EID_SUPPORTED_CHANNELS,
785 WLAN_EID_RRM_ENABLED_CAPABILITIES,
786 WLAN_EID_MOBILITY_DOMAIN,
787 WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */
788 WLAN_EID_RIC_DATA, /* reassoc only */
789 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
791 static const u8 after_ric[] = {
792 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
793 WLAN_EID_HT_CAPABILITY,
794 WLAN_EID_BSS_COEX_2040,
795 WLAN_EID_EXT_CAPABILITY,
796 WLAN_EID_QOS_TRAFFIC_CAPA,
797 WLAN_EID_TIM_BCAST_REQ,
798 WLAN_EID_INTERWORKING,
799 /* 60GHz doesn't happen right now */
800 WLAN_EID_VHT_CAPABILITY,
801 WLAN_EID_OPMODE_NOTIF,
804 noffset = ieee80211_ie_split_ric(assoc_data->ie,
807 ARRAY_SIZE(before_ht),
809 ARRAY_SIZE(after_ric),
811 pos = skb_put(skb, noffset - offset);
812 memcpy(pos, assoc_data->ie + offset, noffset - offset);
816 if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
817 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)))
818 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
820 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
821 ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param,
822 sband, chan, sdata->smps_mode);
824 /* if present, add any custom IEs that go before VHT */
825 if (assoc_data->ie_len) {
826 static const u8 before_vht[] = {
829 WLAN_EID_EXT_SUPP_RATES,
830 WLAN_EID_PWR_CAPABILITY,
831 WLAN_EID_SUPPORTED_CHANNELS,
834 WLAN_EID_RRM_ENABLED_CAPABILITIES,
835 WLAN_EID_MOBILITY_DOMAIN,
836 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
837 WLAN_EID_HT_CAPABILITY,
838 WLAN_EID_BSS_COEX_2040,
839 WLAN_EID_EXT_CAPABILITY,
840 WLAN_EID_QOS_TRAFFIC_CAPA,
841 WLAN_EID_TIM_BCAST_REQ,
842 WLAN_EID_INTERWORKING,
845 /* RIC already taken above, so no need to handle here anymore */
846 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
847 before_vht, ARRAY_SIZE(before_vht),
849 pos = skb_put(skb, noffset - offset);
850 memcpy(pos, assoc_data->ie + offset, noffset - offset);
854 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
855 ieee80211_add_vht_ie(sdata, skb, sband,
856 &assoc_data->ap_vht_cap);
858 /* if present, add any custom non-vendor IEs that go after HT */
859 if (assoc_data->ie_len) {
860 noffset = ieee80211_ie_split_vendor(assoc_data->ie,
863 pos = skb_put(skb, noffset - offset);
864 memcpy(pos, assoc_data->ie + offset, noffset - offset);
868 if (assoc_data->wmm) {
869 if (assoc_data->uapsd) {
870 qos_info = ifmgd->uapsd_queues;
871 qos_info |= (ifmgd->uapsd_max_sp_len <<
872 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
877 pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
880 /* add any remaining custom (i.e. vendor specific here) IEs */
881 if (assoc_data->ie_len) {
882 noffset = assoc_data->ie_len;
883 pos = skb_put(skb, noffset - offset);
884 memcpy(pos, assoc_data->ie + offset, noffset - offset);
887 drv_mgd_prepare_tx(local, sdata);
889 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
890 if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
891 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
892 IEEE80211_TX_INTFL_MLME_CONN_TX;
893 ieee80211_tx_skb(sdata, skb);
896 void ieee80211_send_pspoll(struct ieee80211_local *local,
897 struct ieee80211_sub_if_data *sdata)
899 struct ieee80211_pspoll *pspoll;
902 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
906 pspoll = (struct ieee80211_pspoll *) skb->data;
907 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
909 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
910 ieee80211_tx_skb(sdata, skb);
913 void ieee80211_send_nullfunc(struct ieee80211_local *local,
914 struct ieee80211_sub_if_data *sdata,
918 struct ieee80211_hdr_3addr *nullfunc;
919 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
921 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif);
925 nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
927 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
929 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
930 IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
932 if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
933 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
935 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
936 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
938 ieee80211_tx_skb(sdata, skb);
941 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
942 struct ieee80211_sub_if_data *sdata)
945 struct ieee80211_hdr *nullfunc;
948 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
951 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
955 skb_reserve(skb, local->hw.extra_tx_headroom);
957 nullfunc = (struct ieee80211_hdr *) skb_put(skb, 30);
958 memset(nullfunc, 0, 30);
959 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
960 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
961 nullfunc->frame_control = fc;
962 memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
963 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
964 memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
965 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
967 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
968 ieee80211_tx_skb(sdata, skb);
971 /* spectrum management related things */
972 static void ieee80211_chswitch_work(struct work_struct *work)
974 struct ieee80211_sub_if_data *sdata =
975 container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
976 struct ieee80211_local *local = sdata->local;
977 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
980 if (!ieee80211_sdata_running(sdata))
984 mutex_lock(&local->mtx);
985 mutex_lock(&local->chanctx_mtx);
987 if (!ifmgd->associated)
990 if (!sdata->vif.csa_active)
994 * using reservation isn't immediate as it may be deferred until later
995 * with multi-vif. once reservation is complete it will re-schedule the
996 * work with no reserved_chanctx so verify chandef to check if it
997 * completed successfully
1000 if (sdata->reserved_chanctx) {
1002 * with multi-vif csa driver may call ieee80211_csa_finish()
1003 * many times while waiting for other interfaces to use their
1006 if (sdata->reserved_ready)
1009 ret = ieee80211_vif_use_reserved_context(sdata);
1012 "failed to use reserved channel context, disconnecting (err=%d)\n",
1014 ieee80211_queue_work(&sdata->local->hw,
1015 &ifmgd->csa_connection_drop_work);
1022 if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef,
1023 &sdata->csa_chandef)) {
1025 "failed to finalize channel switch, disconnecting\n");
1026 ieee80211_queue_work(&sdata->local->hw,
1027 &ifmgd->csa_connection_drop_work);
1031 /* XXX: shouldn't really modify cfg80211-owned data! */
1032 ifmgd->associated->channel = sdata->csa_chandef.chan;
1034 ifmgd->csa_waiting_bcn = true;
1036 ieee80211_sta_reset_beacon_monitor(sdata);
1037 ieee80211_sta_reset_conn_monitor(sdata);
1040 mutex_unlock(&local->chanctx_mtx);
1041 mutex_unlock(&local->mtx);
1042 sdata_unlock(sdata);
1045 static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
1047 struct ieee80211_local *local = sdata->local;
1048 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1051 sdata_assert_lock(sdata);
1053 WARN_ON(!sdata->vif.csa_active);
1055 if (sdata->csa_block_tx) {
1056 ieee80211_wake_vif_queues(local, sdata,
1057 IEEE80211_QUEUE_STOP_REASON_CSA);
1058 sdata->csa_block_tx = false;
1061 sdata->vif.csa_active = false;
1062 ifmgd->csa_waiting_bcn = false;
1064 ret = drv_post_channel_switch(sdata);
1067 "driver post channel switch failed, disconnecting\n");
1068 ieee80211_queue_work(&local->hw,
1069 &ifmgd->csa_connection_drop_work);
1073 cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef);
1076 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
1078 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1079 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1081 trace_api_chswitch_done(sdata, success);
1084 "driver channel switch failed, disconnecting\n");
1085 ieee80211_queue_work(&sdata->local->hw,
1086 &ifmgd->csa_connection_drop_work);
1088 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
1091 EXPORT_SYMBOL(ieee80211_chswitch_done);
1093 static void ieee80211_chswitch_timer(unsigned long data)
1095 struct ieee80211_sub_if_data *sdata =
1096 (struct ieee80211_sub_if_data *) data;
1098 ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work);
1102 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
1103 u64 timestamp, u32 device_timestamp,
1104 struct ieee802_11_elems *elems,
1107 struct ieee80211_local *local = sdata->local;
1108 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1109 struct cfg80211_bss *cbss = ifmgd->associated;
1110 struct ieee80211_chanctx_conf *conf;
1111 struct ieee80211_chanctx *chanctx;
1112 enum ieee80211_band current_band;
1113 struct ieee80211_csa_ie csa_ie;
1114 struct ieee80211_channel_switch ch_switch;
1117 sdata_assert_lock(sdata);
1122 if (local->scanning)
1125 /* disregard subsequent announcements if we are already processing */
1126 if (sdata->vif.csa_active)
1129 current_band = cbss->channel->band;
1130 memset(&csa_ie, 0, sizeof(csa_ie));
1131 res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
1133 ifmgd->associated->bssid, &csa_ie);
1135 ieee80211_queue_work(&local->hw,
1136 &ifmgd->csa_connection_drop_work);
1140 if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
1141 IEEE80211_CHAN_DISABLED)) {
1143 "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1144 ifmgd->associated->bssid,
1145 csa_ie.chandef.chan->center_freq,
1146 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1147 csa_ie.chandef.center_freq2);
1148 ieee80211_queue_work(&local->hw,
1149 &ifmgd->csa_connection_drop_work);
1153 if (cfg80211_chandef_identical(&csa_ie.chandef,
1154 &sdata->vif.bss_conf.chandef)) {
1155 if (ifmgd->csa_ignored_same_chan)
1158 "AP %pM tries to chanswitch to same channel, ignore\n",
1159 ifmgd->associated->bssid);
1160 ifmgd->csa_ignored_same_chan = true;
1164 mutex_lock(&local->mtx);
1165 mutex_lock(&local->chanctx_mtx);
1166 conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
1167 lockdep_is_held(&local->chanctx_mtx));
1170 "no channel context assigned to vif?, disconnecting\n");
1171 ieee80211_queue_work(&local->hw,
1172 &ifmgd->csa_connection_drop_work);
1173 mutex_unlock(&local->chanctx_mtx);
1174 mutex_unlock(&local->mtx);
1178 chanctx = container_of(conf, struct ieee80211_chanctx, conf);
1180 if (local->use_chanctx &&
1181 !(local->hw.flags & IEEE80211_HW_CHANCTX_STA_CSA)) {
1183 "driver doesn't support chan-switch with channel contexts\n");
1184 ieee80211_queue_work(&local->hw,
1185 &ifmgd->csa_connection_drop_work);
1186 mutex_unlock(&local->chanctx_mtx);
1187 mutex_unlock(&local->mtx);
1191 ch_switch.timestamp = timestamp;
1192 ch_switch.device_timestamp = device_timestamp;
1193 ch_switch.block_tx = csa_ie.mode;
1194 ch_switch.chandef = csa_ie.chandef;
1195 ch_switch.count = csa_ie.count;
1197 if (drv_pre_channel_switch(sdata, &ch_switch)) {
1199 "preparing for channel switch failed, disconnecting\n");
1200 ieee80211_queue_work(&local->hw,
1201 &ifmgd->csa_connection_drop_work);
1202 mutex_unlock(&local->chanctx_mtx);
1203 mutex_unlock(&local->mtx);
1207 res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef,
1208 chanctx->mode, false);
1211 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1213 ieee80211_queue_work(&local->hw,
1214 &ifmgd->csa_connection_drop_work);
1215 mutex_unlock(&local->chanctx_mtx);
1216 mutex_unlock(&local->mtx);
1219 mutex_unlock(&local->chanctx_mtx);
1221 sdata->vif.csa_active = true;
1222 sdata->csa_chandef = csa_ie.chandef;
1223 sdata->csa_block_tx = csa_ie.mode;
1224 ifmgd->csa_ignored_same_chan = false;
1226 if (sdata->csa_block_tx)
1227 ieee80211_stop_vif_queues(local, sdata,
1228 IEEE80211_QUEUE_STOP_REASON_CSA);
1229 mutex_unlock(&local->mtx);
1231 cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef,
1234 if (local->ops->channel_switch) {
1235 /* use driver's channel switch callback */
1236 drv_channel_switch(local, sdata, &ch_switch);
1240 /* channel switch handled in software */
1241 if (csa_ie.count <= 1)
1242 ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
1244 mod_timer(&ifmgd->chswitch_timer,
1245 TU_TO_EXP_TIME((csa_ie.count - 1) *
1246 cbss->beacon_interval));
1250 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
1251 struct ieee80211_channel *channel,
1252 const u8 *country_ie, u8 country_ie_len,
1253 const u8 *pwr_constr_elem,
1254 int *chan_pwr, int *pwr_reduction)
1256 struct ieee80211_country_ie_triplet *triplet;
1257 int chan = ieee80211_frequency_to_channel(channel->center_freq);
1258 int i, chan_increment;
1259 bool have_chan_pwr = false;
1262 if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
1265 triplet = (void *)(country_ie + 3);
1266 country_ie_len -= 3;
1268 switch (channel->band) {
1272 case IEEE80211_BAND_2GHZ:
1273 case IEEE80211_BAND_60GHZ:
1276 case IEEE80211_BAND_5GHZ:
1282 while (country_ie_len >= 3) {
1283 u8 first_channel = triplet->chans.first_channel;
1285 if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
1288 for (i = 0; i < triplet->chans.num_channels; i++) {
1289 if (first_channel + i * chan_increment == chan) {
1290 have_chan_pwr = true;
1291 *chan_pwr = triplet->chans.max_power;
1300 country_ie_len -= 3;
1303 if (have_chan_pwr && pwr_constr_elem)
1304 *pwr_reduction = *pwr_constr_elem;
1308 return have_chan_pwr;
1311 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
1312 struct ieee80211_channel *channel,
1313 const u8 *cisco_dtpc_ie,
1316 /* From practical testing, the first data byte of the DTPC element
1317 * seems to contain the requested dBm level, and the CLI on Cisco
1318 * APs clearly state the range is -127 to 127 dBm, which indicates
1319 * a signed byte, although it seemingly never actually goes negative.
1320 * The other byte seems to always be zero.
1322 *pwr_level = (__s8)cisco_dtpc_ie[4];
1325 static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
1326 struct ieee80211_channel *channel,
1327 struct ieee80211_mgmt *mgmt,
1328 const u8 *country_ie, u8 country_ie_len,
1329 const u8 *pwr_constr_ie,
1330 const u8 *cisco_dtpc_ie)
1332 bool has_80211h_pwr = false, has_cisco_pwr = false;
1333 int chan_pwr = 0, pwr_reduction_80211h = 0;
1334 int pwr_level_cisco, pwr_level_80211h;
1336 __le16 capab = mgmt->u.probe_resp.capab_info;
1339 (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
1340 capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
1341 has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
1342 sdata, channel, country_ie, country_ie_len,
1343 pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
1345 max_t(int, 0, chan_pwr - pwr_reduction_80211h);
1348 if (cisco_dtpc_ie) {
1349 ieee80211_find_cisco_dtpc(
1350 sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
1351 has_cisco_pwr = true;
1354 if (!has_80211h_pwr && !has_cisco_pwr)
1357 /* If we have both 802.11h and Cisco DTPC, apply both limits
1358 * by picking the smallest of the two power levels advertised.
1360 if (has_80211h_pwr &&
1361 (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
1363 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1364 pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
1365 sdata->u.mgd.bssid);
1366 new_ap_level = pwr_level_80211h;
1367 } else { /* has_cisco_pwr is always true here. */
1369 "Limiting TX power to %d dBm as advertised by %pM\n",
1370 pwr_level_cisco, sdata->u.mgd.bssid);
1371 new_ap_level = pwr_level_cisco;
1374 if (sdata->ap_power_level == new_ap_level)
1377 sdata->ap_power_level = new_ap_level;
1378 if (__ieee80211_recalc_txpower(sdata))
1379 return BSS_CHANGED_TXPOWER;
1384 static void ieee80211_enable_ps(struct ieee80211_local *local,
1385 struct ieee80211_sub_if_data *sdata)
1387 struct ieee80211_conf *conf = &local->hw.conf;
1390 * If we are scanning right now then the parameters will
1391 * take effect when scan finishes.
1393 if (local->scanning)
1396 if (conf->dynamic_ps_timeout > 0 &&
1397 !(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) {
1398 mod_timer(&local->dynamic_ps_timer, jiffies +
1399 msecs_to_jiffies(conf->dynamic_ps_timeout));
1401 if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
1402 ieee80211_send_nullfunc(local, sdata, 1);
1404 if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
1405 (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS))
1408 conf->flags |= IEEE80211_CONF_PS;
1409 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1413 static void ieee80211_change_ps(struct ieee80211_local *local)
1415 struct ieee80211_conf *conf = &local->hw.conf;
1417 if (local->ps_sdata) {
1418 ieee80211_enable_ps(local, local->ps_sdata);
1419 } else if (conf->flags & IEEE80211_CONF_PS) {
1420 conf->flags &= ~IEEE80211_CONF_PS;
1421 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1422 del_timer_sync(&local->dynamic_ps_timer);
1423 cancel_work_sync(&local->dynamic_ps_enable_work);
1427 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
1429 struct ieee80211_if_managed *mgd = &sdata->u.mgd;
1430 struct sta_info *sta = NULL;
1431 bool authorized = false;
1433 if (!mgd->powersave)
1439 if (!mgd->associated)
1442 if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
1445 if (!mgd->have_beacon)
1449 sta = sta_info_get(sdata, mgd->bssid);
1451 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
1457 /* need to hold RTNL or interface lock */
1458 void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
1460 struct ieee80211_sub_if_data *sdata, *found = NULL;
1464 if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) {
1465 local->ps_sdata = NULL;
1469 list_for_each_entry(sdata, &local->interfaces, list) {
1470 if (!ieee80211_sdata_running(sdata))
1472 if (sdata->vif.type == NL80211_IFTYPE_AP) {
1473 /* If an AP vif is found, then disable PS
1474 * by setting the count to zero thereby setting
1480 if (sdata->vif.type != NL80211_IFTYPE_STATION)
1486 if (count == 1 && ieee80211_powersave_allowed(found)) {
1490 latency = pm_qos_request(PM_QOS_NETWORK_LATENCY);
1492 beaconint_us = ieee80211_tu_to_usec(
1493 found->vif.bss_conf.beacon_int);
1495 timeout = local->dynamic_ps_forced_timeout;
1498 * Go to full PSM if the user configures a very low
1499 * latency requirement.
1500 * The 2000 second value is there for compatibility
1501 * until the PM_QOS_NETWORK_LATENCY is configured
1504 if (latency > (1900 * USEC_PER_MSEC) &&
1505 latency != (2000 * USEC_PER_SEC))
1510 local->hw.conf.dynamic_ps_timeout = timeout;
1512 if (beaconint_us > latency) {
1513 local->ps_sdata = NULL;
1516 u8 dtimper = found->u.mgd.dtim_period;
1518 /* If the TIM IE is invalid, pretend the value is 1 */
1521 else if (dtimper > 1)
1522 maxslp = min_t(int, dtimper,
1523 latency / beaconint_us);
1525 local->hw.conf.max_sleep_period = maxslp;
1526 local->hw.conf.ps_dtim_period = dtimper;
1527 local->ps_sdata = found;
1530 local->ps_sdata = NULL;
1533 ieee80211_change_ps(local);
1536 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
1538 bool ps_allowed = ieee80211_powersave_allowed(sdata);
1540 if (sdata->vif.bss_conf.ps != ps_allowed) {
1541 sdata->vif.bss_conf.ps = ps_allowed;
1542 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS);
1546 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
1548 struct ieee80211_local *local =
1549 container_of(work, struct ieee80211_local,
1550 dynamic_ps_disable_work);
1552 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1553 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1554 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1557 ieee80211_wake_queues_by_reason(&local->hw,
1558 IEEE80211_MAX_QUEUE_MAP,
1559 IEEE80211_QUEUE_STOP_REASON_PS,
1563 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
1565 struct ieee80211_local *local =
1566 container_of(work, struct ieee80211_local,
1567 dynamic_ps_enable_work);
1568 struct ieee80211_sub_if_data *sdata = local->ps_sdata;
1569 struct ieee80211_if_managed *ifmgd;
1570 unsigned long flags;
1573 /* can only happen when PS was just disabled anyway */
1577 ifmgd = &sdata->u.mgd;
1579 if (local->hw.conf.flags & IEEE80211_CONF_PS)
1582 if (local->hw.conf.dynamic_ps_timeout > 0) {
1583 /* don't enter PS if TX frames are pending */
1584 if (drv_tx_frames_pending(local)) {
1585 mod_timer(&local->dynamic_ps_timer, jiffies +
1587 local->hw.conf.dynamic_ps_timeout));
1592 * transmission can be stopped by others which leads to
1593 * dynamic_ps_timer expiry. Postpone the ps timer if it
1594 * is not the actual idle state.
1596 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
1597 for (q = 0; q < local->hw.queues; q++) {
1598 if (local->queue_stop_reasons[q]) {
1599 spin_unlock_irqrestore(&local->queue_stop_reason_lock,
1601 mod_timer(&local->dynamic_ps_timer, jiffies +
1603 local->hw.conf.dynamic_ps_timeout));
1607 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
1610 if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
1611 !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1612 if (drv_tx_frames_pending(local)) {
1613 mod_timer(&local->dynamic_ps_timer, jiffies +
1615 local->hw.conf.dynamic_ps_timeout));
1617 ieee80211_send_nullfunc(local, sdata, 1);
1618 /* Flush to get the tx status of nullfunc frame */
1619 ieee80211_flush_queues(local, sdata, false);
1623 if (!((local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) &&
1624 (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)) ||
1625 (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1626 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
1627 local->hw.conf.flags |= IEEE80211_CONF_PS;
1628 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1632 void ieee80211_dynamic_ps_timer(unsigned long data)
1634 struct ieee80211_local *local = (void *) data;
1636 if (local->quiescing || local->suspended)
1639 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
1642 void ieee80211_dfs_cac_timer_work(struct work_struct *work)
1644 struct delayed_work *delayed_work =
1645 container_of(work, struct delayed_work, work);
1646 struct ieee80211_sub_if_data *sdata =
1647 container_of(delayed_work, struct ieee80211_sub_if_data,
1648 dfs_cac_timer_work);
1649 struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
1651 mutex_lock(&sdata->local->mtx);
1652 if (sdata->wdev.cac_started) {
1653 ieee80211_vif_release_channel(sdata);
1654 cfg80211_cac_event(sdata->dev, &chandef,
1655 NL80211_RADAR_CAC_FINISHED,
1658 mutex_unlock(&sdata->local->mtx);
1662 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1664 struct ieee80211_local *local = sdata->local;
1665 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1669 if (local->hw.queues < IEEE80211_NUM_ACS)
1672 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1673 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
1675 unsigned long now = jiffies;
1677 if (tx_tspec->action == TX_TSPEC_ACTION_NONE &&
1678 tx_tspec->admitted_time &&
1679 time_after(now, tx_tspec->time_slice_start + HZ)) {
1680 tx_tspec->consumed_tx_time = 0;
1681 tx_tspec->time_slice_start = now;
1683 if (tx_tspec->downgraded)
1685 TX_TSPEC_ACTION_STOP_DOWNGRADE;
1688 switch (tx_tspec->action) {
1689 case TX_TSPEC_ACTION_STOP_DOWNGRADE:
1690 /* take the original parameters */
1691 if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac]))
1693 "failed to set TX queue parameters for queue %d\n",
1695 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1696 tx_tspec->downgraded = false;
1699 case TX_TSPEC_ACTION_DOWNGRADE:
1700 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
1701 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1705 /* downgrade next lower non-ACM AC */
1706 for (non_acm_ac = ac + 1;
1707 non_acm_ac < IEEE80211_NUM_ACS;
1709 if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac)))
1711 /* The loop will result in using BK even if it requires
1712 * admission control, such configuration makes no sense
1713 * and we have to transmit somehow - the AC selection
1714 * does the same thing.
1716 if (drv_conf_tx(local, sdata, ac,
1717 &sdata->tx_conf[non_acm_ac]))
1719 "failed to set TX queue parameters for queue %d\n",
1721 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1723 schedule_delayed_work(&ifmgd->tx_tspec_wk,
1724 tx_tspec->time_slice_start + HZ - now + 1);
1726 case TX_TSPEC_ACTION_NONE:
1735 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1737 if (__ieee80211_sta_handle_tspec_ac_params(sdata))
1738 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS);
1741 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work)
1743 struct ieee80211_sub_if_data *sdata;
1745 sdata = container_of(work, struct ieee80211_sub_if_data,
1746 u.mgd.tx_tspec_wk.work);
1747 ieee80211_sta_handle_tspec_ac_params(sdata);
1751 static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
1752 struct ieee80211_sub_if_data *sdata,
1753 const u8 *wmm_param, size_t wmm_param_len)
1755 struct ieee80211_tx_queue_params params;
1756 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1760 u8 uapsd_queues = 0;
1762 if (!local->ops->conf_tx)
1765 if (local->hw.queues < IEEE80211_NUM_ACS)
1771 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
1774 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
1775 uapsd_queues = ifmgd->uapsd_queues;
1777 count = wmm_param[6] & 0x0f;
1778 if (count == ifmgd->wmm_last_param_set)
1780 ifmgd->wmm_last_param_set = count;
1782 pos = wmm_param + 8;
1783 left = wmm_param_len - 8;
1785 memset(¶ms, 0, sizeof(params));
1788 for (; left >= 4; left -= 4, pos += 4) {
1789 int aci = (pos[0] >> 5) & 0x03;
1790 int acm = (pos[0] >> 4) & 0x01;
1798 sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
1799 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
1805 sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
1806 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
1812 sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
1813 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
1820 sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
1821 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
1826 params.aifs = pos[0] & 0x0f;
1827 params.cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
1828 params.cw_min = ecw2cw(pos[1] & 0x0f);
1829 params.txop = get_unaligned_le16(pos + 2);
1831 params.uapsd = uapsd;
1834 "WMM queue=%d aci=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
1836 params.aifs, params.cw_min, params.cw_max,
1837 params.txop, params.uapsd,
1838 ifmgd->tx_tspec[queue].downgraded);
1839 sdata->tx_conf[queue] = params;
1840 if (!ifmgd->tx_tspec[queue].downgraded &&
1841 drv_conf_tx(local, sdata, queue, ¶ms))
1843 "failed to set TX queue parameters for queue %d\n",
1847 /* enable WMM or activate new settings */
1848 sdata->vif.bss_conf.qos = true;
1852 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1854 lockdep_assert_held(&sdata->local->mtx);
1856 sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
1857 ieee80211_run_deferred_scan(sdata->local);
1860 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1862 mutex_lock(&sdata->local->mtx);
1863 __ieee80211_stop_poll(sdata);
1864 mutex_unlock(&sdata->local->mtx);
1867 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
1868 u16 capab, bool erp_valid, u8 erp)
1870 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1872 bool use_protection;
1873 bool use_short_preamble;
1874 bool use_short_slot;
1877 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
1878 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
1880 use_protection = false;
1881 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
1884 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
1885 if (ieee80211_get_sdata_band(sdata) == IEEE80211_BAND_5GHZ)
1886 use_short_slot = true;
1888 if (use_protection != bss_conf->use_cts_prot) {
1889 bss_conf->use_cts_prot = use_protection;
1890 changed |= BSS_CHANGED_ERP_CTS_PROT;
1893 if (use_short_preamble != bss_conf->use_short_preamble) {
1894 bss_conf->use_short_preamble = use_short_preamble;
1895 changed |= BSS_CHANGED_ERP_PREAMBLE;
1898 if (use_short_slot != bss_conf->use_short_slot) {
1899 bss_conf->use_short_slot = use_short_slot;
1900 changed |= BSS_CHANGED_ERP_SLOT;
1906 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
1907 struct cfg80211_bss *cbss,
1908 u32 bss_info_changed)
1910 struct ieee80211_bss *bss = (void *)cbss->priv;
1911 struct ieee80211_local *local = sdata->local;
1912 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1914 bss_info_changed |= BSS_CHANGED_ASSOC;
1915 bss_info_changed |= ieee80211_handle_bss_capability(sdata,
1916 bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
1918 sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
1919 beacon_loss_count * bss_conf->beacon_int));
1921 sdata->u.mgd.associated = cbss;
1922 memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
1924 sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
1926 if (sdata->vif.p2p) {
1927 const struct cfg80211_bss_ies *ies;
1930 ies = rcu_dereference(cbss->ies);
1934 ret = cfg80211_get_p2p_attr(
1935 ies->data, ies->len,
1936 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
1937 (u8 *) &bss_conf->p2p_noa_attr,
1938 sizeof(bss_conf->p2p_noa_attr));
1940 sdata->u.mgd.p2p_noa_index =
1941 bss_conf->p2p_noa_attr.index;
1942 bss_info_changed |= BSS_CHANGED_P2P_PS;
1948 /* just to be sure */
1949 ieee80211_stop_poll(sdata);
1951 ieee80211_led_assoc(local, 1);
1953 if (sdata->u.mgd.have_beacon) {
1955 * If the AP is buggy we may get here with no DTIM period
1956 * known, so assume it's 1 which is the only safe assumption
1957 * in that case, although if the TIM IE is broken powersave
1958 * probably just won't work at all.
1960 bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
1961 bss_conf->beacon_rate = bss->beacon_rate;
1962 bss_info_changed |= BSS_CHANGED_BEACON_INFO;
1964 bss_conf->beacon_rate = NULL;
1965 bss_conf->dtim_period = 0;
1968 bss_conf->assoc = 1;
1970 /* Tell the driver to monitor connection quality (if supported) */
1971 if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
1972 bss_conf->cqm_rssi_thold)
1973 bss_info_changed |= BSS_CHANGED_CQM;
1975 /* Enable ARP filtering */
1976 if (bss_conf->arp_addr_cnt)
1977 bss_info_changed |= BSS_CHANGED_ARP_FILTER;
1979 ieee80211_bss_info_change_notify(sdata, bss_info_changed);
1981 mutex_lock(&local->iflist_mtx);
1982 ieee80211_recalc_ps(local, -1);
1983 mutex_unlock(&local->iflist_mtx);
1985 ieee80211_recalc_smps(sdata);
1986 ieee80211_recalc_ps_vif(sdata);
1988 netif_carrier_on(sdata->dev);
1991 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
1992 u16 stype, u16 reason, bool tx,
1995 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1996 struct ieee80211_local *local = sdata->local;
1999 sdata_assert_lock(sdata);
2001 if (WARN_ON_ONCE(tx && !frame_buf))
2004 if (WARN_ON(!ifmgd->associated))
2007 ieee80211_stop_poll(sdata);
2009 ifmgd->associated = NULL;
2010 netif_carrier_off(sdata->dev);
2013 * if we want to get out of ps before disassoc (why?) we have
2014 * to do it before sending disassoc, as otherwise the null-packet
2017 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
2018 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
2019 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2021 local->ps_sdata = NULL;
2023 /* disable per-vif ps */
2024 ieee80211_recalc_ps_vif(sdata);
2026 /* make sure ongoing transmission finishes */
2030 * drop any frame before deauth/disassoc, this can be data or
2031 * management frame. Since we are disconnecting, we should not
2032 * insist sending these frames which can take time and delay
2033 * the disconnection and possible the roaming.
2036 ieee80211_flush_queues(local, sdata, true);
2038 /* deauthenticate/disassociate now */
2039 if (tx || frame_buf)
2040 ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
2041 reason, tx, frame_buf);
2043 /* flush out frame - make sure the deauth was actually sent */
2045 ieee80211_flush_queues(local, sdata, false);
2047 /* clear bssid only after building the needed mgmt frames */
2048 memset(ifmgd->bssid, 0, ETH_ALEN);
2050 /* remove AP and TDLS peers */
2051 sta_info_flush(sdata);
2053 /* finally reset all BSS / config parameters */
2054 changed |= ieee80211_reset_erp_info(sdata);
2056 ieee80211_led_assoc(local, 0);
2057 changed |= BSS_CHANGED_ASSOC;
2058 sdata->vif.bss_conf.assoc = false;
2060 ifmgd->p2p_noa_index = -1;
2061 memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
2062 sizeof(sdata->vif.bss_conf.p2p_noa_attr));
2064 /* on the next assoc, re-program HT/VHT parameters */
2065 memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
2066 memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
2067 memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
2068 memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
2070 sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
2072 del_timer_sync(&local->dynamic_ps_timer);
2073 cancel_work_sync(&local->dynamic_ps_enable_work);
2075 /* Disable ARP filtering */
2076 if (sdata->vif.bss_conf.arp_addr_cnt)
2077 changed |= BSS_CHANGED_ARP_FILTER;
2079 sdata->vif.bss_conf.qos = false;
2080 changed |= BSS_CHANGED_QOS;
2082 /* The BSSID (not really interesting) and HT changed */
2083 changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
2084 ieee80211_bss_info_change_notify(sdata, changed);
2086 /* disassociated - set to defaults now */
2087 ieee80211_set_wmm_default(sdata, false);
2089 del_timer_sync(&sdata->u.mgd.conn_mon_timer);
2090 del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
2091 del_timer_sync(&sdata->u.mgd.timer);
2092 del_timer_sync(&sdata->u.mgd.chswitch_timer);
2094 sdata->vif.bss_conf.dtim_period = 0;
2095 sdata->vif.bss_conf.beacon_rate = NULL;
2097 ifmgd->have_beacon = false;
2100 mutex_lock(&local->mtx);
2101 ieee80211_vif_release_channel(sdata);
2103 sdata->vif.csa_active = false;
2104 ifmgd->csa_waiting_bcn = false;
2105 ifmgd->csa_ignored_same_chan = false;
2106 if (sdata->csa_block_tx) {
2107 ieee80211_wake_vif_queues(local, sdata,
2108 IEEE80211_QUEUE_STOP_REASON_CSA);
2109 sdata->csa_block_tx = false;
2111 mutex_unlock(&local->mtx);
2113 /* existing TX TSPEC sessions no longer exist */
2114 memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec));
2115 cancel_delayed_work_sync(&ifmgd->tx_tspec_wk);
2117 sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
2120 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
2121 struct ieee80211_hdr *hdr)
2124 * We can postpone the mgd.timer whenever receiving unicast frames
2125 * from AP because we know that the connection is working both ways
2126 * at that time. But multicast frames (and hence also beacons) must
2127 * be ignored here, because we need to trigger the timer during
2128 * data idle periods for sending the periodic probe request to the
2129 * AP we're connected to.
2131 if (is_multicast_ether_addr(hdr->addr1))
2134 ieee80211_sta_reset_conn_monitor(sdata);
2137 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
2139 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2140 struct ieee80211_local *local = sdata->local;
2142 mutex_lock(&local->mtx);
2143 if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
2146 __ieee80211_stop_poll(sdata);
2148 mutex_lock(&local->iflist_mtx);
2149 ieee80211_recalc_ps(local, -1);
2150 mutex_unlock(&local->iflist_mtx);
2152 if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
2156 * We've received a probe response, but are not sure whether
2157 * we have or will be receiving any beacons or data, so let's
2158 * schedule the timers again, just in case.
2160 ieee80211_sta_reset_beacon_monitor(sdata);
2162 mod_timer(&ifmgd->conn_mon_timer,
2163 round_jiffies_up(jiffies +
2164 IEEE80211_CONNECTION_IDLE_TIME));
2166 mutex_unlock(&local->mtx);
2169 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
2170 struct ieee80211_hdr *hdr,
2173 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2174 u16 tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
2175 int ac = ieee80211_ac_from_tid(tid);
2176 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
2177 unsigned long now = jiffies;
2179 if (likely(!tx_tspec->admitted_time))
2182 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
2183 tx_tspec->consumed_tx_time = 0;
2184 tx_tspec->time_slice_start = now;
2186 if (tx_tspec->downgraded) {
2187 tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
2188 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2192 if (tx_tspec->downgraded)
2195 tx_tspec->consumed_tx_time += tx_time;
2197 if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) {
2198 tx_tspec->downgraded = true;
2199 tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE;
2200 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2204 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
2205 struct ieee80211_hdr *hdr, bool ack, u16 tx_time)
2207 ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time);
2209 if (!ieee80211_is_data(hdr->frame_control))
2212 if (ieee80211_is_nullfunc(hdr->frame_control) &&
2213 sdata->u.mgd.probe_send_count > 0) {
2215 ieee80211_sta_reset_conn_monitor(sdata);
2217 sdata->u.mgd.nullfunc_failed = true;
2218 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
2223 ieee80211_sta_reset_conn_monitor(sdata);
2226 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
2228 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2230 u8 *dst = ifmgd->associated->bssid;
2231 u8 unicast_limit = max(1, max_probe_tries - 3);
2234 * Try sending broadcast probe requests for the last three
2235 * probe requests after the first ones failed since some
2236 * buggy APs only support broadcast probe requests.
2238 if (ifmgd->probe_send_count >= unicast_limit)
2242 * When the hardware reports an accurate Tx ACK status, it's
2243 * better to send a nullfunc frame instead of a probe request,
2244 * as it will kick us off the AP quickly if we aren't associated
2245 * anymore. The timeout will be reset if the frame is ACKed by
2248 ifmgd->probe_send_count++;
2250 if (sdata->local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
2251 ifmgd->nullfunc_failed = false;
2252 ieee80211_send_nullfunc(sdata->local, sdata, 0);
2257 ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
2258 if (WARN_ON_ONCE(ssid == NULL))
2263 ieee80211_send_probe_req(sdata, sdata->vif.addr, NULL,
2264 ssid + 2, ssid_len, NULL,
2265 0, (u32) -1, true, 0,
2266 ifmgd->associated->channel, false);
2270 ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
2271 run_again(sdata, ifmgd->probe_timeout);
2274 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
2277 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2278 bool already = false;
2280 if (!ieee80211_sdata_running(sdata))
2285 if (!ifmgd->associated)
2288 mutex_lock(&sdata->local->mtx);
2290 if (sdata->local->tmp_channel || sdata->local->scanning) {
2291 mutex_unlock(&sdata->local->mtx);
2296 mlme_dbg_ratelimited(sdata,
2297 "detected beacon loss from AP (missed %d beacons) - probing\n",
2300 ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL);
2304 * The driver/our work has already reported this event or the
2305 * connection monitoring has kicked in and we have already sent
2306 * a probe request. Or maybe the AP died and the driver keeps
2307 * reporting until we disassociate...
2309 * In either case we have to ignore the current call to this
2310 * function (except for setting the correct probe reason bit)
2311 * because otherwise we would reset the timer every time and
2312 * never check whether we received a probe response!
2314 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
2317 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
2319 mutex_unlock(&sdata->local->mtx);
2324 mutex_lock(&sdata->local->iflist_mtx);
2325 ieee80211_recalc_ps(sdata->local, -1);
2326 mutex_unlock(&sdata->local->iflist_mtx);
2328 ifmgd->probe_send_count = 0;
2329 ieee80211_mgd_probe_ap_send(sdata);
2331 sdata_unlock(sdata);
2334 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
2335 struct ieee80211_vif *vif)
2337 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2338 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2339 struct cfg80211_bss *cbss;
2340 struct sk_buff *skb;
2344 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
2347 sdata_assert_lock(sdata);
2349 if (ifmgd->associated)
2350 cbss = ifmgd->associated;
2351 else if (ifmgd->auth_data)
2352 cbss = ifmgd->auth_data->bss;
2353 else if (ifmgd->assoc_data)
2354 cbss = ifmgd->assoc_data->bss;
2359 ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
2360 if (WARN_ON_ONCE(ssid == NULL))
2365 skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid,
2366 (u32) -1, cbss->channel,
2373 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
2375 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
2377 struct ieee80211_local *local = sdata->local;
2378 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2379 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
2382 if (!ifmgd->associated) {
2383 sdata_unlock(sdata);
2387 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
2388 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
2390 mutex_lock(&local->mtx);
2391 sdata->vif.csa_active = false;
2392 ifmgd->csa_waiting_bcn = false;
2393 if (sdata->csa_block_tx) {
2394 ieee80211_wake_vif_queues(local, sdata,
2395 IEEE80211_QUEUE_STOP_REASON_CSA);
2396 sdata->csa_block_tx = false;
2398 mutex_unlock(&local->mtx);
2400 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
2401 IEEE80211_DEAUTH_FRAME_LEN);
2402 sdata_unlock(sdata);
2405 static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
2407 struct ieee80211_sub_if_data *sdata =
2408 container_of(work, struct ieee80211_sub_if_data,
2409 u.mgd.beacon_connection_loss_work);
2410 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2411 struct sta_info *sta;
2413 if (ifmgd->associated) {
2415 sta = sta_info_get(sdata, ifmgd->bssid);
2417 sta->beacon_loss_count++;
2421 if (ifmgd->connection_loss) {
2422 sdata_info(sdata, "Connection to AP %pM lost\n",
2424 __ieee80211_disconnect(sdata);
2426 ieee80211_mgd_probe_ap(sdata, true);
2430 static void ieee80211_csa_connection_drop_work(struct work_struct *work)
2432 struct ieee80211_sub_if_data *sdata =
2433 container_of(work, struct ieee80211_sub_if_data,
2434 u.mgd.csa_connection_drop_work);
2436 __ieee80211_disconnect(sdata);
2439 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
2441 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2442 struct ieee80211_hw *hw = &sdata->local->hw;
2444 trace_api_beacon_loss(sdata);
2446 sdata->u.mgd.connection_loss = false;
2447 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2449 EXPORT_SYMBOL(ieee80211_beacon_loss);
2451 void ieee80211_connection_loss(struct ieee80211_vif *vif)
2453 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2454 struct ieee80211_hw *hw = &sdata->local->hw;
2456 trace_api_connection_loss(sdata);
2458 sdata->u.mgd.connection_loss = true;
2459 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2461 EXPORT_SYMBOL(ieee80211_connection_loss);
2464 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
2467 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2469 sdata_assert_lock(sdata);
2473 * we are not authenticated yet, the only timer that could be
2474 * running is the timeout for the authentication response which
2475 * which is not relevant anymore.
2477 del_timer_sync(&sdata->u.mgd.timer);
2478 sta_info_destroy_addr(sdata, auth_data->bss->bssid);
2480 memset(sdata->u.mgd.bssid, 0, ETH_ALEN);
2481 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2482 sdata->u.mgd.flags = 0;
2483 mutex_lock(&sdata->local->mtx);
2484 ieee80211_vif_release_channel(sdata);
2485 mutex_unlock(&sdata->local->mtx);
2488 cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
2490 sdata->u.mgd.auth_data = NULL;
2493 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
2494 struct ieee80211_mgmt *mgmt, size_t len)
2496 struct ieee80211_local *local = sdata->local;
2497 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2499 struct ieee802_11_elems elems;
2502 pos = mgmt->u.auth.variable;
2503 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2504 if (!elems.challenge)
2506 auth_data->expected_transaction = 4;
2507 drv_mgd_prepare_tx(sdata->local, sdata);
2508 if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
2509 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
2510 IEEE80211_TX_INTFL_MLME_CONN_TX;
2511 ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
2512 elems.challenge - 2, elems.challenge_len + 2,
2513 auth_data->bss->bssid, auth_data->bss->bssid,
2514 auth_data->key, auth_data->key_len,
2515 auth_data->key_idx, tx_flags);
2518 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
2519 struct ieee80211_mgmt *mgmt, size_t len)
2521 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2523 u16 auth_alg, auth_transaction, status_code;
2524 struct sta_info *sta;
2526 sdata_assert_lock(sdata);
2531 if (!ifmgd->auth_data || ifmgd->auth_data->done)
2534 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
2536 if (!ether_addr_equal(bssid, mgmt->bssid))
2539 auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
2540 auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
2541 status_code = le16_to_cpu(mgmt->u.auth.status_code);
2543 if (auth_alg != ifmgd->auth_data->algorithm ||
2544 auth_transaction != ifmgd->auth_data->expected_transaction) {
2545 sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
2546 mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
2548 ifmgd->auth_data->expected_transaction);
2552 if (status_code != WLAN_STATUS_SUCCESS) {
2553 sdata_info(sdata, "%pM denied authentication (status %d)\n",
2554 mgmt->sa, status_code);
2555 ieee80211_destroy_auth_data(sdata, false);
2556 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2560 switch (ifmgd->auth_data->algorithm) {
2561 case WLAN_AUTH_OPEN:
2562 case WLAN_AUTH_LEAP:
2566 case WLAN_AUTH_SHARED_KEY:
2567 if (ifmgd->auth_data->expected_transaction != 4) {
2568 ieee80211_auth_challenge(sdata, mgmt, len);
2569 /* need another frame */
2574 WARN_ONCE(1, "invalid auth alg %d",
2575 ifmgd->auth_data->algorithm);
2579 sdata_info(sdata, "authenticated\n");
2580 ifmgd->auth_data->done = true;
2581 ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
2582 ifmgd->auth_data->timeout_started = true;
2583 run_again(sdata, ifmgd->auth_data->timeout);
2585 if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
2586 ifmgd->auth_data->expected_transaction != 2) {
2588 * Report auth frame to user space for processing since another
2589 * round of Authentication frames is still needed.
2591 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2595 /* move station state to auth */
2596 mutex_lock(&sdata->local->sta_mtx);
2597 sta = sta_info_get(sdata, bssid);
2599 WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid);
2602 if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
2603 sdata_info(sdata, "failed moving %pM to auth\n", bssid);
2606 mutex_unlock(&sdata->local->sta_mtx);
2608 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2611 mutex_unlock(&sdata->local->sta_mtx);
2612 /* ignore frame -- wait for timeout */
2615 #define case_WLAN(type) \
2616 case WLAN_REASON_##type: return #type
2618 static const char *ieee80211_get_reason_code_string(u16 reason_code)
2620 switch (reason_code) {
2621 case_WLAN(UNSPECIFIED);
2622 case_WLAN(PREV_AUTH_NOT_VALID);
2623 case_WLAN(DEAUTH_LEAVING);
2624 case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
2625 case_WLAN(DISASSOC_AP_BUSY);
2626 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
2627 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
2628 case_WLAN(DISASSOC_STA_HAS_LEFT);
2629 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
2630 case_WLAN(DISASSOC_BAD_POWER);
2631 case_WLAN(DISASSOC_BAD_SUPP_CHAN);
2632 case_WLAN(INVALID_IE);
2633 case_WLAN(MIC_FAILURE);
2634 case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
2635 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
2636 case_WLAN(IE_DIFFERENT);
2637 case_WLAN(INVALID_GROUP_CIPHER);
2638 case_WLAN(INVALID_PAIRWISE_CIPHER);
2639 case_WLAN(INVALID_AKMP);
2640 case_WLAN(UNSUPP_RSN_VERSION);
2641 case_WLAN(INVALID_RSN_IE_CAP);
2642 case_WLAN(IEEE8021X_FAILED);
2643 case_WLAN(CIPHER_SUITE_REJECTED);
2644 case_WLAN(DISASSOC_UNSPECIFIED_QOS);
2645 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
2646 case_WLAN(DISASSOC_LOW_ACK);
2647 case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
2648 case_WLAN(QSTA_LEAVE_QBSS);
2649 case_WLAN(QSTA_NOT_USE);
2650 case_WLAN(QSTA_REQUIRE_SETUP);
2651 case_WLAN(QSTA_TIMEOUT);
2652 case_WLAN(QSTA_CIPHER_NOT_SUPP);
2653 case_WLAN(MESH_PEER_CANCELED);
2654 case_WLAN(MESH_MAX_PEERS);
2655 case_WLAN(MESH_CONFIG);
2656 case_WLAN(MESH_CLOSE);
2657 case_WLAN(MESH_MAX_RETRIES);
2658 case_WLAN(MESH_CONFIRM_TIMEOUT);
2659 case_WLAN(MESH_INVALID_GTK);
2660 case_WLAN(MESH_INCONSISTENT_PARAM);
2661 case_WLAN(MESH_INVALID_SECURITY);
2662 case_WLAN(MESH_PATH_ERROR);
2663 case_WLAN(MESH_PATH_NOFORWARD);
2664 case_WLAN(MESH_PATH_DEST_UNREACHABLE);
2665 case_WLAN(MAC_EXISTS_IN_MBSS);
2666 case_WLAN(MESH_CHAN_REGULATORY);
2667 case_WLAN(MESH_CHAN);
2668 default: return "<unknown>";
2672 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
2673 struct ieee80211_mgmt *mgmt, size_t len)
2675 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2676 const u8 *bssid = NULL;
2679 sdata_assert_lock(sdata);
2684 if (!ifmgd->associated ||
2685 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
2688 bssid = ifmgd->associated->bssid;
2690 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
2692 sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
2693 bssid, reason_code, ieee80211_get_reason_code_string(reason_code));
2695 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2697 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2701 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
2702 struct ieee80211_mgmt *mgmt, size_t len)
2704 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2707 sdata_assert_lock(sdata);
2712 if (!ifmgd->associated ||
2713 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
2716 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
2718 sdata_info(sdata, "disassociated from %pM (Reason: %u)\n",
2719 mgmt->sa, reason_code);
2721 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2723 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2726 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
2727 u8 *supp_rates, unsigned int supp_rates_len,
2728 u32 *rates, u32 *basic_rates,
2729 bool *have_higher_than_11mbit,
2730 int *min_rate, int *min_rate_index,
2731 int shift, u32 rate_flags)
2735 for (i = 0; i < supp_rates_len; i++) {
2736 int rate = supp_rates[i] & 0x7f;
2737 bool is_basic = !!(supp_rates[i] & 0x80);
2739 if ((rate * 5 * (1 << shift)) > 110)
2740 *have_higher_than_11mbit = true;
2743 * BSS_MEMBERSHIP_SELECTOR_HT_PHY is defined in 802.11n-2009
2744 * 7.3.2.2 as a magic value instead of a rate. Hence, skip it.
2746 * Note: Even through the membership selector and the basic
2747 * rate flag share the same bit, they are not exactly
2750 if (!!(supp_rates[i] & 0x80) &&
2751 (supp_rates[i] & 0x7f) == BSS_MEMBERSHIP_SELECTOR_HT_PHY)
2754 for (j = 0; j < sband->n_bitrates; j++) {
2755 struct ieee80211_rate *br;
2758 br = &sband->bitrates[j];
2759 if ((rate_flags & br->flags) != rate_flags)
2762 brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
2763 if (brate == rate) {
2766 *basic_rates |= BIT(j);
2767 if ((rate * 5) < *min_rate) {
2768 *min_rate = rate * 5;
2769 *min_rate_index = j;
2777 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
2780 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
2782 sdata_assert_lock(sdata);
2786 * we are not associated yet, the only timer that could be
2787 * running is the timeout for the association response which
2788 * which is not relevant anymore.
2790 del_timer_sync(&sdata->u.mgd.timer);
2791 sta_info_destroy_addr(sdata, assoc_data->bss->bssid);
2793 memset(sdata->u.mgd.bssid, 0, ETH_ALEN);
2794 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2795 sdata->u.mgd.flags = 0;
2796 mutex_lock(&sdata->local->mtx);
2797 ieee80211_vif_release_channel(sdata);
2798 mutex_unlock(&sdata->local->mtx);
2802 sdata->u.mgd.assoc_data = NULL;
2805 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
2806 struct cfg80211_bss *cbss,
2807 struct ieee80211_mgmt *mgmt, size_t len)
2809 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2810 struct ieee80211_local *local = sdata->local;
2811 struct ieee80211_supported_band *sband;
2812 struct sta_info *sta;
2814 u16 capab_info, aid;
2815 struct ieee802_11_elems elems;
2816 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2817 const struct cfg80211_bss_ies *bss_ies = NULL;
2818 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
2823 /* AssocResp and ReassocResp have identical structure */
2825 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
2826 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
2828 if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
2829 sdata_info(sdata, "invalid AID value 0x%x; bits 15:14 not set\n",
2831 aid &= ~(BIT(15) | BIT(14));
2833 ifmgd->broken_ap = false;
2835 if (aid == 0 || aid > IEEE80211_MAX_AID) {
2836 sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
2839 ifmgd->broken_ap = true;
2842 pos = mgmt->u.assoc_resp.variable;
2843 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2845 if (!elems.supp_rates) {
2846 sdata_info(sdata, "no SuppRates element in AssocResp\n");
2851 ifmgd->tdls_chan_switch_prohibited =
2852 elems.ext_capab && elems.ext_capab_len >= 5 &&
2853 (elems.ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
2856 * Some APs are erroneously not including some information in their
2857 * (re)association response frames. Try to recover by using the data
2858 * from the beacon or probe response. This seems to afflict mobile
2859 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
2860 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
2862 if ((assoc_data->wmm && !elems.wmm_param) ||
2863 (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2864 (!elems.ht_cap_elem || !elems.ht_operation)) ||
2865 (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2866 (!elems.vht_cap_elem || !elems.vht_operation))) {
2867 const struct cfg80211_bss_ies *ies;
2868 struct ieee802_11_elems bss_elems;
2871 ies = rcu_dereference(cbss->ies);
2873 bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
2879 ieee802_11_parse_elems(bss_ies->data, bss_ies->len,
2881 if (assoc_data->wmm &&
2882 !elems.wmm_param && bss_elems.wmm_param) {
2883 elems.wmm_param = bss_elems.wmm_param;
2885 "AP bug: WMM param missing from AssocResp\n");
2889 * Also check if we requested HT/VHT, otherwise the AP doesn't
2890 * have to include the IEs in the (re)association response.
2892 if (!elems.ht_cap_elem && bss_elems.ht_cap_elem &&
2893 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2894 elems.ht_cap_elem = bss_elems.ht_cap_elem;
2896 "AP bug: HT capability missing from AssocResp\n");
2898 if (!elems.ht_operation && bss_elems.ht_operation &&
2899 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2900 elems.ht_operation = bss_elems.ht_operation;
2902 "AP bug: HT operation missing from AssocResp\n");
2904 if (!elems.vht_cap_elem && bss_elems.vht_cap_elem &&
2905 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2906 elems.vht_cap_elem = bss_elems.vht_cap_elem;
2908 "AP bug: VHT capa missing from AssocResp\n");
2910 if (!elems.vht_operation && bss_elems.vht_operation &&
2911 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2912 elems.vht_operation = bss_elems.vht_operation;
2914 "AP bug: VHT operation missing from AssocResp\n");
2919 * We previously checked these in the beacon/probe response, so
2920 * they should be present here. This is just a safety net.
2922 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2923 (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) {
2925 "HT AP is missing WMM params or HT capability/operation\n");
2930 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2931 (!elems.vht_cap_elem || !elems.vht_operation)) {
2933 "VHT AP is missing VHT capability/operation\n");
2938 mutex_lock(&sdata->local->sta_mtx);
2940 * station info was already allocated and inserted before
2941 * the association and should be available to us
2943 sta = sta_info_get(sdata, cbss->bssid);
2944 if (WARN_ON(!sta)) {
2945 mutex_unlock(&sdata->local->sta_mtx);
2950 sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
2952 /* Set up internal HT/VHT capabilities */
2953 if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
2954 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
2955 elems.ht_cap_elem, sta);
2957 if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
2958 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
2959 elems.vht_cap_elem, sta);
2962 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
2963 * in their association response, so ignore that data for our own
2964 * configuration. If it changed since the last beacon, we'll get the
2965 * next beacon and update then.
2969 * If an operating mode notification IE is present, override the
2970 * NSS calculation (that would be done in rate_control_rate_init())
2971 * and use the # of streams from that element.
2973 if (elems.opmode_notif &&
2974 !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
2977 nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
2978 nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
2980 sta->sta.rx_nss = nss;
2983 rate_control_rate_init(sta);
2985 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED)
2986 set_sta_flag(sta, WLAN_STA_MFP);
2988 sta->sta.wme = elems.wmm_param;
2990 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
2991 if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
2992 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
2995 "failed to move station %pM to desired state\n",
2997 WARN_ON(__sta_info_destroy(sta));
2998 mutex_unlock(&sdata->local->sta_mtx);
3003 mutex_unlock(&sdata->local->sta_mtx);
3006 * Always handle WMM once after association regardless
3007 * of the first value the AP uses. Setting -1 here has
3008 * that effect because the AP values is an unsigned
3011 ifmgd->wmm_last_param_set = -1;
3013 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) && elems.wmm_param)
3014 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3015 elems.wmm_param_len);
3017 ieee80211_set_wmm_default(sdata, false);
3018 changed |= BSS_CHANGED_QOS;
3020 /* set AID and assoc capability,
3021 * ieee80211_set_associated() will tell the driver */
3022 bss_conf->aid = aid;
3023 bss_conf->assoc_capability = capab_info;
3024 ieee80211_set_associated(sdata, cbss, changed);
3027 * If we're using 4-addr mode, let the AP know that we're
3028 * doing so, so that it can create the STA VLAN on its side
3030 if (ifmgd->use_4addr)
3031 ieee80211_send_4addr_nullfunc(local, sdata);
3034 * Start timer to probe the connection to the AP now.
3035 * Also start the timer that will detect beacon loss.
3037 ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
3038 ieee80211_sta_reset_beacon_monitor(sdata);
3046 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
3047 struct ieee80211_mgmt *mgmt,
3050 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3051 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
3052 u16 capab_info, status_code, aid;
3053 struct ieee802_11_elems elems;
3054 int ac, uapsd_queues = -1;
3057 struct cfg80211_bss *bss;
3059 sdata_assert_lock(sdata);
3063 if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
3067 * AssocResp and ReassocResp have identical structure, so process both
3068 * of them in this function.
3074 reassoc = ieee80211_is_reassoc_req(mgmt->frame_control);
3075 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3076 status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
3077 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
3080 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
3081 reassoc ? "Rea" : "A", mgmt->sa,
3082 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
3084 pos = mgmt->u.assoc_resp.variable;
3085 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
3087 if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
3088 elems.timeout_int &&
3089 elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
3091 tu = le32_to_cpu(elems.timeout_int->value);
3092 ms = tu * 1024 / 1000;
3094 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
3096 assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
3097 assoc_data->timeout_started = true;
3098 if (ms > IEEE80211_ASSOC_TIMEOUT)
3099 run_again(sdata, assoc_data->timeout);
3103 bss = assoc_data->bss;
3105 if (status_code != WLAN_STATUS_SUCCESS) {
3106 sdata_info(sdata, "%pM denied association (code=%d)\n",
3107 mgmt->sa, status_code);
3108 ieee80211_destroy_assoc_data(sdata, false);
3110 if (!ieee80211_assoc_success(sdata, bss, mgmt, len)) {
3111 /* oops -- internal error -- send timeout for now */
3112 ieee80211_destroy_assoc_data(sdata, false);
3113 cfg80211_assoc_timeout(sdata->dev, bss);
3116 sdata_info(sdata, "associated\n");
3119 * destroy assoc_data afterwards, as otherwise an idle
3120 * recalc after assoc_data is NULL but before associated
3121 * is set can cause the interface to go idle
3123 ieee80211_destroy_assoc_data(sdata, true);
3125 /* get uapsd queues configuration */
3127 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
3128 if (sdata->tx_conf[ac].uapsd)
3129 uapsd_queues |= BIT(ac);
3132 cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues);
3135 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
3136 struct ieee80211_mgmt *mgmt, size_t len,
3137 struct ieee80211_rx_status *rx_status,
3138 struct ieee802_11_elems *elems)
3140 struct ieee80211_local *local = sdata->local;
3141 struct ieee80211_bss *bss;
3142 struct ieee80211_channel *channel;
3144 sdata_assert_lock(sdata);
3146 channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq);
3150 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
3153 sdata->vif.bss_conf.beacon_rate = bss->beacon_rate;
3154 ieee80211_rx_bss_put(local, bss);
3159 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
3160 struct sk_buff *skb)
3162 struct ieee80211_mgmt *mgmt = (void *)skb->data;
3163 struct ieee80211_if_managed *ifmgd;
3164 struct ieee80211_rx_status *rx_status = (void *) skb->cb;
3165 size_t baselen, len = skb->len;
3166 struct ieee802_11_elems elems;
3168 ifmgd = &sdata->u.mgd;
3170 sdata_assert_lock(sdata);
3172 if (!ether_addr_equal(mgmt->da, sdata->vif.addr))
3173 return; /* ignore ProbeResp to foreign address */
3175 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
3179 ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
3182 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3184 if (ifmgd->associated &&
3185 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3186 ieee80211_reset_ap_probe(sdata);
3188 if (ifmgd->auth_data && !ifmgd->auth_data->bss->proberesp_ies &&
3189 ether_addr_equal(mgmt->bssid, ifmgd->auth_data->bss->bssid)) {
3190 /* got probe response, continue with auth */
3191 sdata_info(sdata, "direct probe responded\n");
3192 ifmgd->auth_data->tries = 0;
3193 ifmgd->auth_data->timeout = jiffies;
3194 ifmgd->auth_data->timeout_started = true;
3195 run_again(sdata, ifmgd->auth_data->timeout);
3200 * This is the canonical list of information elements we care about,
3201 * the filter code also gives us all changes to the Microsoft OUI
3202 * (00:50:F2) vendor IE which is used for WMM which we need to track,
3203 * as well as the DTPC IE (part of the Cisco OUI) used for signaling
3204 * changes to requested client power.
3206 * We implement beacon filtering in software since that means we can
3207 * avoid processing the frame here and in cfg80211, and userspace
3208 * will not be able to tell whether the hardware supports it or not.
3210 * XXX: This list needs to be dynamic -- userspace needs to be able to
3211 * add items it requires. It also needs to be able to tell us to
3212 * look out for other vendor IEs.
3214 static const u64 care_about_ies =
3215 (1ULL << WLAN_EID_COUNTRY) |
3216 (1ULL << WLAN_EID_ERP_INFO) |
3217 (1ULL << WLAN_EID_CHANNEL_SWITCH) |
3218 (1ULL << WLAN_EID_PWR_CONSTRAINT) |
3219 (1ULL << WLAN_EID_HT_CAPABILITY) |
3220 (1ULL << WLAN_EID_HT_OPERATION) |
3221 (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
3223 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
3224 struct ieee80211_mgmt *mgmt, size_t len,
3225 struct ieee80211_rx_status *rx_status)
3227 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3228 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
3230 struct ieee802_11_elems elems;
3231 struct ieee80211_local *local = sdata->local;
3232 struct ieee80211_chanctx_conf *chanctx_conf;
3233 struct ieee80211_channel *chan;
3234 struct sta_info *sta;
3240 u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
3242 sdata_assert_lock(sdata);
3244 /* Process beacon from the current BSS */
3245 baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
3250 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
3251 if (!chanctx_conf) {
3256 if (rx_status->freq != chanctx_conf->def.chan->center_freq) {
3260 chan = chanctx_conf->def.chan;
3263 if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
3264 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
3265 ieee802_11_parse_elems(mgmt->u.beacon.variable,
3266 len - baselen, false, &elems);
3268 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3269 if (elems.tim && !elems.parse_error) {
3270 const struct ieee80211_tim_ie *tim_ie = elems.tim;
3271 ifmgd->dtim_period = tim_ie->dtim_period;
3273 ifmgd->have_beacon = true;
3274 ifmgd->assoc_data->need_beacon = false;
3275 if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
3276 sdata->vif.bss_conf.sync_tsf =
3277 le64_to_cpu(mgmt->u.beacon.timestamp);
3278 sdata->vif.bss_conf.sync_device_ts =
3279 rx_status->device_timestamp;
3281 sdata->vif.bss_conf.sync_dtim_count =
3282 elems.tim->dtim_count;
3284 sdata->vif.bss_conf.sync_dtim_count = 0;
3286 /* continue assoc process */
3287 ifmgd->assoc_data->timeout = jiffies;
3288 ifmgd->assoc_data->timeout_started = true;
3289 run_again(sdata, ifmgd->assoc_data->timeout);
3293 if (!ifmgd->associated ||
3294 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3296 bssid = ifmgd->associated->bssid;
3298 /* Track average RSSI from the Beacon frames of the current AP */
3299 ifmgd->last_beacon_signal = rx_status->signal;
3300 if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
3301 ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
3302 ifmgd->ave_beacon_signal = rx_status->signal * 16;
3303 ifmgd->last_cqm_event_signal = 0;
3304 ifmgd->count_beacon_signal = 1;
3305 ifmgd->last_ave_beacon_signal = 0;
3307 ifmgd->ave_beacon_signal =
3308 (IEEE80211_SIGNAL_AVE_WEIGHT * rx_status->signal * 16 +
3309 (16 - IEEE80211_SIGNAL_AVE_WEIGHT) *
3310 ifmgd->ave_beacon_signal) / 16;
3311 ifmgd->count_beacon_signal++;
3314 if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
3315 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3316 int sig = ifmgd->ave_beacon_signal;
3317 int last_sig = ifmgd->last_ave_beacon_signal;
3320 * if signal crosses either of the boundaries, invoke callback
3321 * with appropriate parameters
3323 if (sig > ifmgd->rssi_max_thold &&
3324 (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
3325 ifmgd->last_ave_beacon_signal = sig;
3326 drv_rssi_callback(local, sdata, RSSI_EVENT_HIGH);
3327 } else if (sig < ifmgd->rssi_min_thold &&
3328 (last_sig >= ifmgd->rssi_max_thold ||
3330 ifmgd->last_ave_beacon_signal = sig;
3331 drv_rssi_callback(local, sdata, RSSI_EVENT_LOW);
3335 if (bss_conf->cqm_rssi_thold &&
3336 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
3337 !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
3338 int sig = ifmgd->ave_beacon_signal / 16;
3339 int last_event = ifmgd->last_cqm_event_signal;
3340 int thold = bss_conf->cqm_rssi_thold;
3341 int hyst = bss_conf->cqm_rssi_hyst;
3343 (last_event == 0 || sig < last_event - hyst)) {
3344 ifmgd->last_cqm_event_signal = sig;
3345 ieee80211_cqm_rssi_notify(
3347 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3349 } else if (sig > thold &&
3350 (last_event == 0 || sig > last_event + hyst)) {
3351 ifmgd->last_cqm_event_signal = sig;
3352 ieee80211_cqm_rssi_notify(
3354 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3359 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
3360 mlme_dbg_ratelimited(sdata,
3361 "cancelling AP probe due to a received beacon\n");
3362 ieee80211_reset_ap_probe(sdata);
3366 * Push the beacon loss detection into the future since
3367 * we are processing a beacon from the AP just now.
3369 ieee80211_sta_reset_beacon_monitor(sdata);
3371 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
3372 ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
3373 len - baselen, false, &elems,
3374 care_about_ies, ncrc);
3376 if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) {
3377 bool directed_tim = ieee80211_check_tim(elems.tim,
3381 if (local->hw.conf.dynamic_ps_timeout > 0) {
3382 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
3383 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
3384 ieee80211_hw_config(local,
3385 IEEE80211_CONF_CHANGE_PS);
3387 ieee80211_send_nullfunc(local, sdata, 0);
3388 } else if (!local->pspolling && sdata->u.mgd.powersave) {
3389 local->pspolling = true;
3392 * Here is assumed that the driver will be
3393 * able to send ps-poll frame and receive a
3394 * response even though power save mode is
3395 * enabled, but some drivers might require
3396 * to disable power save here. This needs
3397 * to be investigated.
3399 ieee80211_send_pspoll(local, sdata);
3404 if (sdata->vif.p2p) {
3405 struct ieee80211_p2p_noa_attr noa = {};
3408 ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable,
3410 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
3411 (u8 *) &noa, sizeof(noa));
3413 if (sdata->u.mgd.p2p_noa_index != noa.index) {
3414 /* valid noa_attr and index changed */
3415 sdata->u.mgd.p2p_noa_index = noa.index;
3416 memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
3417 changed |= BSS_CHANGED_P2P_PS;
3419 * make sure we update all information, the CRC
3420 * mechanism doesn't look at P2P attributes.
3422 ifmgd->beacon_crc_valid = false;
3424 } else if (sdata->u.mgd.p2p_noa_index != -1) {
3425 /* noa_attr not found and we had valid noa_attr before */
3426 sdata->u.mgd.p2p_noa_index = -1;
3427 memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
3428 changed |= BSS_CHANGED_P2P_PS;
3429 ifmgd->beacon_crc_valid = false;
3433 if (ifmgd->csa_waiting_bcn)
3434 ieee80211_chswitch_post_beacon(sdata);
3436 if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
3438 ifmgd->beacon_crc = ncrc;
3439 ifmgd->beacon_crc_valid = true;
3441 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3443 ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
3444 rx_status->device_timestamp,
3447 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) &&
3448 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3449 elems.wmm_param_len))
3450 changed |= BSS_CHANGED_QOS;
3453 * If we haven't had a beacon before, tell the driver about the
3454 * DTIM period (and beacon timing if desired) now.
3456 if (!ifmgd->have_beacon) {
3457 /* a few bogus AP send dtim_period = 0 or no TIM IE */
3459 bss_conf->dtim_period = elems.tim->dtim_period ?: 1;
3461 bss_conf->dtim_period = 1;
3463 if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
3464 sdata->vif.bss_conf.sync_tsf =
3465 le64_to_cpu(mgmt->u.beacon.timestamp);
3466 sdata->vif.bss_conf.sync_device_ts =
3467 rx_status->device_timestamp;
3469 sdata->vif.bss_conf.sync_dtim_count =
3470 elems.tim->dtim_count;
3472 sdata->vif.bss_conf.sync_dtim_count = 0;
3475 changed |= BSS_CHANGED_BEACON_INFO;
3476 ifmgd->have_beacon = true;
3478 mutex_lock(&local->iflist_mtx);
3479 ieee80211_recalc_ps(local, -1);
3480 mutex_unlock(&local->iflist_mtx);
3482 ieee80211_recalc_ps_vif(sdata);
3485 if (elems.erp_info) {
3487 erp_value = elems.erp_info[0];
3491 changed |= ieee80211_handle_bss_capability(sdata,
3492 le16_to_cpu(mgmt->u.beacon.capab_info),
3493 erp_valid, erp_value);
3495 mutex_lock(&local->sta_mtx);
3496 sta = sta_info_get(sdata, bssid);
3498 if (ieee80211_config_bw(sdata, sta,
3499 elems.ht_cap_elem, elems.ht_operation,
3500 elems.vht_operation, bssid, &changed)) {
3501 mutex_unlock(&local->sta_mtx);
3502 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
3503 WLAN_REASON_DEAUTH_LEAVING,
3505 cfg80211_tx_mlme_mgmt(sdata->dev, deauth_buf,
3506 sizeof(deauth_buf));
3510 if (sta && elems.opmode_notif)
3511 ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
3512 rx_status->band, true);
3513 mutex_unlock(&local->sta_mtx);
3515 changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
3517 elems.country_elem_len,
3518 elems.pwr_constr_elem,
3519 elems.cisco_dtpc_elem);
3521 ieee80211_bss_info_change_notify(sdata, changed);
3524 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
3525 struct sk_buff *skb)
3527 struct ieee80211_rx_status *rx_status;
3528 struct ieee80211_mgmt *mgmt;
3530 struct ieee802_11_elems elems;
3533 rx_status = (struct ieee80211_rx_status *) skb->cb;
3534 mgmt = (struct ieee80211_mgmt *) skb->data;
3535 fc = le16_to_cpu(mgmt->frame_control);
3539 switch (fc & IEEE80211_FCTL_STYPE) {
3540 case IEEE80211_STYPE_BEACON:
3541 ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
3543 case IEEE80211_STYPE_PROBE_RESP:
3544 ieee80211_rx_mgmt_probe_resp(sdata, skb);
3546 case IEEE80211_STYPE_AUTH:
3547 ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
3549 case IEEE80211_STYPE_DEAUTH:
3550 ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
3552 case IEEE80211_STYPE_DISASSOC:
3553 ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
3555 case IEEE80211_STYPE_ASSOC_RESP:
3556 case IEEE80211_STYPE_REASSOC_RESP:
3557 ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
3559 case IEEE80211_STYPE_ACTION:
3560 if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
3561 ies_len = skb->len -
3562 offsetof(struct ieee80211_mgmt,
3563 u.action.u.chan_switch.variable);
3568 ieee802_11_parse_elems(
3569 mgmt->u.action.u.chan_switch.variable,
3570 ies_len, true, &elems);
3572 if (elems.parse_error)
3575 ieee80211_sta_process_chanswitch(sdata,
3577 rx_status->device_timestamp,
3579 } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
3580 ies_len = skb->len -
3581 offsetof(struct ieee80211_mgmt,
3582 u.action.u.ext_chan_switch.variable);
3587 ieee802_11_parse_elems(
3588 mgmt->u.action.u.ext_chan_switch.variable,
3589 ies_len, true, &elems);
3591 if (elems.parse_error)
3594 /* for the handling code pretend this was also an IE */
3595 elems.ext_chansw_ie =
3596 &mgmt->u.action.u.ext_chan_switch.data;
3598 ieee80211_sta_process_chanswitch(sdata,
3600 rx_status->device_timestamp,
3605 sdata_unlock(sdata);
3608 static void ieee80211_sta_timer(unsigned long data)
3610 struct ieee80211_sub_if_data *sdata =
3611 (struct ieee80211_sub_if_data *) data;
3613 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
3616 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
3617 u8 *bssid, u8 reason, bool tx)
3619 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
3621 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
3624 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
3625 IEEE80211_DEAUTH_FRAME_LEN);
3628 static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata)
3630 struct ieee80211_local *local = sdata->local;
3631 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3632 struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
3635 sdata_assert_lock(sdata);
3637 if (WARN_ON_ONCE(!auth_data))
3642 if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
3643 sdata_info(sdata, "authentication with %pM timed out\n",
3644 auth_data->bss->bssid);
3647 * Most likely AP is not in the range so remove the
3648 * bss struct for that AP.
3650 cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
3655 drv_mgd_prepare_tx(local, sdata);
3657 if (auth_data->bss->proberesp_ies) {
3661 sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
3662 auth_data->bss->bssid, auth_data->tries,
3663 IEEE80211_AUTH_MAX_TRIES);
3665 auth_data->expected_transaction = 2;
3667 if (auth_data->algorithm == WLAN_AUTH_SAE) {
3668 trans = auth_data->sae_trans;
3669 status = auth_data->sae_status;
3670 auth_data->expected_transaction = trans;
3673 if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
3674 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
3675 IEEE80211_TX_INTFL_MLME_CONN_TX;
3677 ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
3678 auth_data->data, auth_data->data_len,
3679 auth_data->bss->bssid,
3680 auth_data->bss->bssid, NULL, 0, 0,
3685 sdata_info(sdata, "direct probe to %pM (try %d/%i)\n",
3686 auth_data->bss->bssid, auth_data->tries,
3687 IEEE80211_AUTH_MAX_TRIES);
3690 ssidie = ieee80211_bss_get_ie(auth_data->bss, WLAN_EID_SSID);
3696 * Direct probe is sent to broadcast address as some APs
3697 * will not answer to direct packet in unassociated state.
3699 ieee80211_send_probe_req(sdata, sdata->vif.addr, NULL,
3700 ssidie + 2, ssidie[1],
3701 NULL, 0, (u32) -1, true, 0,
3702 auth_data->bss->channel, false);
3706 if (tx_flags == 0) {
3707 auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
3708 auth_data->timeout_started = true;
3709 run_again(sdata, auth_data->timeout);
3711 auth_data->timeout =
3712 round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
3713 auth_data->timeout_started = true;
3714 run_again(sdata, auth_data->timeout);
3720 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
3722 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
3723 struct ieee80211_local *local = sdata->local;
3725 sdata_assert_lock(sdata);
3727 assoc_data->tries++;
3728 if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
3729 sdata_info(sdata, "association with %pM timed out\n",
3730 assoc_data->bss->bssid);
3733 * Most likely AP is not in the range so remove the
3734 * bss struct for that AP.
3736 cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss);
3741 sdata_info(sdata, "associate with %pM (try %d/%d)\n",
3742 assoc_data->bss->bssid, assoc_data->tries,
3743 IEEE80211_ASSOC_MAX_TRIES);
3744 ieee80211_send_assoc(sdata);
3746 if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) {
3747 assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
3748 assoc_data->timeout_started = true;
3749 run_again(sdata, assoc_data->timeout);
3751 assoc_data->timeout =
3752 round_jiffies_up(jiffies +
3753 IEEE80211_ASSOC_TIMEOUT_LONG);
3754 assoc_data->timeout_started = true;
3755 run_again(sdata, assoc_data->timeout);
3761 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
3762 __le16 fc, bool acked)
3764 struct ieee80211_local *local = sdata->local;
3766 sdata->u.mgd.status_fc = fc;
3767 sdata->u.mgd.status_acked = acked;
3768 sdata->u.mgd.status_received = true;
3770 ieee80211_queue_work(&local->hw, &sdata->work);
3773 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
3775 struct ieee80211_local *local = sdata->local;
3776 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3780 if (ifmgd->status_received) {
3781 __le16 fc = ifmgd->status_fc;
3782 bool status_acked = ifmgd->status_acked;
3784 ifmgd->status_received = false;
3785 if (ifmgd->auth_data &&
3786 (ieee80211_is_probe_req(fc) || ieee80211_is_auth(fc))) {
3788 ifmgd->auth_data->timeout =
3789 jiffies + IEEE80211_AUTH_TIMEOUT_SHORT;
3790 run_again(sdata, ifmgd->auth_data->timeout);
3792 ifmgd->auth_data->timeout = jiffies - 1;
3794 ifmgd->auth_data->timeout_started = true;
3795 } else if (ifmgd->assoc_data &&
3796 (ieee80211_is_assoc_req(fc) ||
3797 ieee80211_is_reassoc_req(fc))) {
3799 ifmgd->assoc_data->timeout =
3800 jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
3801 run_again(sdata, ifmgd->assoc_data->timeout);
3803 ifmgd->assoc_data->timeout = jiffies - 1;
3805 ifmgd->assoc_data->timeout_started = true;
3809 if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
3810 time_after(jiffies, ifmgd->auth_data->timeout)) {
3811 if (ifmgd->auth_data->done) {
3813 * ok ... we waited for assoc but userspace didn't,
3814 * so let's just kill the auth data
3816 ieee80211_destroy_auth_data(sdata, false);
3817 } else if (ieee80211_probe_auth(sdata)) {
3820 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
3822 ieee80211_destroy_auth_data(sdata, false);
3824 cfg80211_auth_timeout(sdata->dev, bssid);
3826 } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
3827 run_again(sdata, ifmgd->auth_data->timeout);
3829 if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
3830 time_after(jiffies, ifmgd->assoc_data->timeout)) {
3831 if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
3832 ieee80211_do_assoc(sdata)) {
3833 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
3835 ieee80211_destroy_assoc_data(sdata, false);
3836 cfg80211_assoc_timeout(sdata->dev, bss);
3838 } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
3839 run_again(sdata, ifmgd->assoc_data->timeout);
3841 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
3842 ifmgd->associated) {
3846 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
3848 if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
3849 max_tries = max_nullfunc_tries;
3851 max_tries = max_probe_tries;
3853 /* ACK received for nullfunc probing frame */
3854 if (!ifmgd->probe_send_count)
3855 ieee80211_reset_ap_probe(sdata);
3856 else if (ifmgd->nullfunc_failed) {
3857 if (ifmgd->probe_send_count < max_tries) {
3859 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
3860 bssid, ifmgd->probe_send_count,
3862 ieee80211_mgd_probe_ap_send(sdata);
3865 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
3867 ieee80211_sta_connection_lost(sdata, bssid,
3868 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
3871 } else if (time_is_after_jiffies(ifmgd->probe_timeout))
3872 run_again(sdata, ifmgd->probe_timeout);
3873 else if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
3875 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
3876 bssid, probe_wait_ms);
3877 ieee80211_sta_connection_lost(sdata, bssid,
3878 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3879 } else if (ifmgd->probe_send_count < max_tries) {
3881 "No probe response from AP %pM after %dms, try %d/%i\n",
3882 bssid, probe_wait_ms,
3883 ifmgd->probe_send_count, max_tries);
3884 ieee80211_mgd_probe_ap_send(sdata);
3887 * We actually lost the connection ... or did we?
3890 wiphy_debug(local->hw.wiphy,
3891 "%s: No probe response from AP %pM"
3892 " after %dms, disconnecting.\n",
3894 bssid, probe_wait_ms);
3896 ieee80211_sta_connection_lost(sdata, bssid,
3897 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3901 sdata_unlock(sdata);
3904 static void ieee80211_sta_bcn_mon_timer(unsigned long data)
3906 struct ieee80211_sub_if_data *sdata =
3907 (struct ieee80211_sub_if_data *) data;
3908 struct ieee80211_local *local = sdata->local;
3909 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3911 if (local->quiescing)
3914 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
3917 sdata->u.mgd.connection_loss = false;
3918 ieee80211_queue_work(&sdata->local->hw,
3919 &sdata->u.mgd.beacon_connection_loss_work);
3922 static void ieee80211_sta_conn_mon_timer(unsigned long data)
3924 struct ieee80211_sub_if_data *sdata =
3925 (struct ieee80211_sub_if_data *) data;
3926 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3927 struct ieee80211_local *local = sdata->local;
3929 if (local->quiescing)
3932 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
3935 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
3938 static void ieee80211_sta_monitor_work(struct work_struct *work)
3940 struct ieee80211_sub_if_data *sdata =
3941 container_of(work, struct ieee80211_sub_if_data,
3942 u.mgd.monitor_work);
3944 ieee80211_mgd_probe_ap(sdata, false);
3947 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
3951 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
3952 __ieee80211_stop_poll(sdata);
3954 /* let's probe the connection once */
3955 flags = sdata->local->hw.flags;
3956 if (!(flags & IEEE80211_HW_CONNECTION_MONITOR))
3957 ieee80211_queue_work(&sdata->local->hw,
3958 &sdata->u.mgd.monitor_work);
3959 /* and do all the other regular work too */
3960 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
3965 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
3967 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3968 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
3972 if (ifmgd->auth_data || ifmgd->assoc_data) {
3973 const u8 *bssid = ifmgd->auth_data ?
3974 ifmgd->auth_data->bss->bssid :
3975 ifmgd->assoc_data->bss->bssid;
3978 * If we are trying to authenticate / associate while suspending,
3979 * cfg80211 won't know and won't actually abort those attempts,
3980 * thus we need to do that ourselves.
3982 ieee80211_send_deauth_disassoc(sdata, bssid,
3983 IEEE80211_STYPE_DEAUTH,
3984 WLAN_REASON_DEAUTH_LEAVING,
3986 if (ifmgd->assoc_data)
3987 ieee80211_destroy_assoc_data(sdata, false);
3988 if (ifmgd->auth_data)
3989 ieee80211_destroy_auth_data(sdata, false);
3990 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
3991 IEEE80211_DEAUTH_FRAME_LEN);
3994 sdata_unlock(sdata);
3997 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
3999 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4002 if (!ifmgd->associated) {
4003 sdata_unlock(sdata);
4007 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
4008 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
4009 mlme_dbg(sdata, "driver requested disconnect after resume\n");
4010 ieee80211_sta_connection_lost(sdata,
4011 ifmgd->associated->bssid,
4012 WLAN_REASON_UNSPECIFIED,
4014 sdata_unlock(sdata);
4017 sdata_unlock(sdata);
4021 /* interface setup */
4022 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
4024 struct ieee80211_if_managed *ifmgd;
4026 ifmgd = &sdata->u.mgd;
4027 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
4028 INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
4029 INIT_WORK(&ifmgd->beacon_connection_loss_work,
4030 ieee80211_beacon_connection_loss_work);
4031 INIT_WORK(&ifmgd->csa_connection_drop_work,
4032 ieee80211_csa_connection_drop_work);
4033 INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work);
4034 INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
4035 ieee80211_tdls_peer_del_work);
4036 setup_timer(&ifmgd->timer, ieee80211_sta_timer,
4037 (unsigned long) sdata);
4038 setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer,
4039 (unsigned long) sdata);
4040 setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer,
4041 (unsigned long) sdata);
4042 setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer,
4043 (unsigned long) sdata);
4044 INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk,
4045 ieee80211_sta_handle_tspec_ac_params_wk);
4048 ifmgd->powersave = sdata->wdev.ps;
4049 ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
4050 ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
4051 ifmgd->p2p_noa_index = -1;
4053 if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
4054 ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
4056 ifmgd->req_smps = IEEE80211_SMPS_OFF;
4058 /* Setup TDLS data */
4059 spin_lock_init(&ifmgd->teardown_lock);
4060 ifmgd->teardown_skb = NULL;
4061 ifmgd->orig_teardown_skb = NULL;
4064 /* scan finished notification */
4065 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
4067 struct ieee80211_sub_if_data *sdata;
4069 /* Restart STA timers */
4071 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
4072 if (ieee80211_sdata_running(sdata))
4073 ieee80211_restart_sta_timer(sdata);
4078 int ieee80211_max_network_latency(struct notifier_block *nb,
4079 unsigned long data, void *dummy)
4081 s32 latency_usec = (s32) data;
4082 struct ieee80211_local *local =
4083 container_of(nb, struct ieee80211_local,
4084 network_latency_notifier);
4086 mutex_lock(&local->iflist_mtx);
4087 ieee80211_recalc_ps(local, latency_usec);
4088 mutex_unlock(&local->iflist_mtx);
4093 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
4094 struct cfg80211_bss *cbss)
4096 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4097 const u8 *ht_cap_ie, *vht_cap_ie;
4098 const struct ieee80211_ht_cap *ht_cap;
4099 const struct ieee80211_vht_cap *vht_cap;
4102 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT)
4105 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4106 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) {
4107 ht_cap = (void *)(ht_cap_ie + 2);
4108 chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
4110 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
4111 * "Tx Unequal Modulation Supported" fields.
4115 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
4118 vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4119 if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) {
4123 vht_cap = (void *)(vht_cap_ie + 2);
4124 tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
4125 for (nss = 8; nss > 0; nss--) {
4126 if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
4127 IEEE80211_VHT_MCS_NOT_SUPPORTED)
4130 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
4131 chains = max(chains, nss);
4137 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
4138 struct cfg80211_bss *cbss)
4140 struct ieee80211_local *local = sdata->local;
4141 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4142 const struct ieee80211_ht_cap *ht_cap = NULL;
4143 const struct ieee80211_ht_operation *ht_oper = NULL;
4144 const struct ieee80211_vht_operation *vht_oper = NULL;
4145 struct ieee80211_supported_band *sband;
4146 struct cfg80211_chan_def chandef;
4149 sband = local->hw.wiphy->bands[cbss->channel->band];
4151 ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ |
4152 IEEE80211_STA_DISABLE_80P80MHZ |
4153 IEEE80211_STA_DISABLE_160MHZ);
4157 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
4158 sband->ht_cap.ht_supported) {
4159 const u8 *ht_oper_ie, *ht_cap_ie;
4161 ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
4162 if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper))
4163 ht_oper = (void *)(ht_oper_ie + 2);
4165 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4166 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap))
4167 ht_cap = (void *)(ht_cap_ie + 2);
4170 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4175 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
4176 sband->vht_cap.vht_supported) {
4177 const u8 *vht_oper_ie, *vht_cap;
4179 vht_oper_ie = ieee80211_bss_get_ie(cbss,
4180 WLAN_EID_VHT_OPERATION);
4181 if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper))
4182 vht_oper = (void *)(vht_oper_ie + 2);
4183 if (vht_oper && !ht_oper) {
4186 "AP advertised VHT without HT, disabling both\n");
4187 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4188 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4191 vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4192 if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) {
4193 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4198 ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
4200 ht_cap, ht_oper, vht_oper,
4203 sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
4208 /* will change later if needed */
4209 sdata->smps_mode = IEEE80211_SMPS_OFF;
4211 mutex_lock(&local->mtx);
4213 * If this fails (possibly due to channel context sharing
4214 * on incompatible channels, e.g. 80+80 and 160 sharing the
4215 * same control channel) try to use a smaller bandwidth.
4217 ret = ieee80211_vif_use_channel(sdata, &chandef,
4218 IEEE80211_CHANCTX_SHARED);
4220 /* don't downgrade for 5 and 10 MHz channels, though. */
4221 if (chandef.width == NL80211_CHAN_WIDTH_5 ||
4222 chandef.width == NL80211_CHAN_WIDTH_10)
4225 while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
4226 ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
4227 ret = ieee80211_vif_use_channel(sdata, &chandef,
4228 IEEE80211_CHANCTX_SHARED);
4231 mutex_unlock(&local->mtx);
4235 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
4236 struct cfg80211_bss *cbss, bool assoc)
4238 struct ieee80211_local *local = sdata->local;
4239 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4240 struct ieee80211_bss *bss = (void *)cbss->priv;
4241 struct sta_info *new_sta = NULL;
4242 struct ieee80211_supported_band *sband;
4243 struct ieee80211_sta_ht_cap sta_ht_cap;
4244 bool have_sta = false, is_override = false;
4247 sband = local->hw.wiphy->bands[cbss->channel->band];
4249 if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
4254 have_sta = sta_info_get(sdata, cbss->bssid);
4259 new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
4264 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
4265 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
4267 is_override = (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) !=
4268 (sband->ht_cap.cap &
4269 IEEE80211_HT_CAP_SUP_WIDTH_20_40);
4271 if (new_sta || is_override) {
4272 err = ieee80211_prep_channel(sdata, cbss);
4275 sta_info_free(local, new_sta);
4281 u32 rates = 0, basic_rates = 0;
4282 bool have_higher_than_11mbit;
4283 int min_rate = INT_MAX, min_rate_index = -1;
4284 struct ieee80211_chanctx_conf *chanctx_conf;
4285 const struct cfg80211_bss_ies *ies;
4286 int shift = ieee80211_vif_get_shift(&sdata->vif);
4290 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
4291 if (WARN_ON(!chanctx_conf)) {
4293 sta_info_free(local, new_sta);
4296 rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
4299 ieee80211_get_rates(sband, bss->supp_rates,
4300 bss->supp_rates_len,
4301 &rates, &basic_rates,
4302 &have_higher_than_11mbit,
4303 &min_rate, &min_rate_index,
4307 * This used to be a workaround for basic rates missing
4308 * in the association response frame. Now that we no
4309 * longer use the basic rates from there, it probably
4310 * doesn't happen any more, but keep the workaround so
4311 * in case some *other* APs are buggy in different ways
4312 * we can connect -- with a warning.
4314 if (!basic_rates && min_rate_index >= 0) {
4316 "No basic rates, using min rate instead\n");
4317 basic_rates = BIT(min_rate_index);
4320 new_sta->sta.supp_rates[cbss->channel->band] = rates;
4321 sdata->vif.bss_conf.basic_rates = basic_rates;
4323 /* cf. IEEE 802.11 9.2.12 */
4324 if (cbss->channel->band == IEEE80211_BAND_2GHZ &&
4325 have_higher_than_11mbit)
4326 sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
4328 sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
4330 memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
4332 /* set timing information */
4333 sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
4335 ies = rcu_dereference(cbss->beacon_ies);
4339 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4340 sdata->vif.bss_conf.sync_device_ts =
4341 bss->device_ts_beacon;
4342 tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4343 ies->data, ies->len);
4344 if (tim_ie && tim_ie[1] >= 2)
4345 sdata->vif.bss_conf.sync_dtim_count = tim_ie[2];
4347 sdata->vif.bss_conf.sync_dtim_count = 0;
4348 } else if (!(local->hw.flags &
4349 IEEE80211_HW_TIMING_BEACON_ONLY)) {
4350 ies = rcu_dereference(cbss->proberesp_ies);
4351 /* must be non-NULL since beacon IEs were NULL */
4352 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4353 sdata->vif.bss_conf.sync_device_ts =
4354 bss->device_ts_presp;
4355 sdata->vif.bss_conf.sync_dtim_count = 0;
4357 sdata->vif.bss_conf.sync_tsf = 0;
4358 sdata->vif.bss_conf.sync_device_ts = 0;
4359 sdata->vif.bss_conf.sync_dtim_count = 0;
4363 /* tell driver about BSSID, basic rates and timing */
4364 ieee80211_bss_info_change_notify(sdata,
4365 BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES |
4366 BSS_CHANGED_BEACON_INT);
4369 sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
4371 err = sta_info_insert(new_sta);
4375 "failed to insert STA entry for the AP (error %d)\n",
4380 WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid));
4386 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
4387 struct cfg80211_auth_request *req)
4389 struct ieee80211_local *local = sdata->local;
4390 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4391 struct ieee80211_mgd_auth_data *auth_data;
4395 /* prepare auth data structure */
4397 switch (req->auth_type) {
4398 case NL80211_AUTHTYPE_OPEN_SYSTEM:
4399 auth_alg = WLAN_AUTH_OPEN;
4401 case NL80211_AUTHTYPE_SHARED_KEY:
4402 if (IS_ERR(local->wep_tx_tfm))
4404 auth_alg = WLAN_AUTH_SHARED_KEY;
4406 case NL80211_AUTHTYPE_FT:
4407 auth_alg = WLAN_AUTH_FT;
4409 case NL80211_AUTHTYPE_NETWORK_EAP:
4410 auth_alg = WLAN_AUTH_LEAP;
4412 case NL80211_AUTHTYPE_SAE:
4413 auth_alg = WLAN_AUTH_SAE;
4419 auth_data = kzalloc(sizeof(*auth_data) + req->sae_data_len +
4420 req->ie_len, GFP_KERNEL);
4424 auth_data->bss = req->bss;
4426 if (req->sae_data_len >= 4) {
4427 __le16 *pos = (__le16 *) req->sae_data;
4428 auth_data->sae_trans = le16_to_cpu(pos[0]);
4429 auth_data->sae_status = le16_to_cpu(pos[1]);
4430 memcpy(auth_data->data, req->sae_data + 4,
4431 req->sae_data_len - 4);
4432 auth_data->data_len += req->sae_data_len - 4;
4435 if (req->ie && req->ie_len) {
4436 memcpy(&auth_data->data[auth_data->data_len],
4437 req->ie, req->ie_len);
4438 auth_data->data_len += req->ie_len;
4441 if (req->key && req->key_len) {
4442 auth_data->key_len = req->key_len;
4443 auth_data->key_idx = req->key_idx;
4444 memcpy(auth_data->key, req->key, req->key_len);
4447 auth_data->algorithm = auth_alg;
4449 /* try to authenticate/probe */
4451 if ((ifmgd->auth_data && !ifmgd->auth_data->done) ||
4452 ifmgd->assoc_data) {
4457 if (ifmgd->auth_data)
4458 ieee80211_destroy_auth_data(sdata, false);
4460 /* prep auth_data so we don't go into idle on disassoc */
4461 ifmgd->auth_data = auth_data;
4463 if (ifmgd->associated) {
4464 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4466 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4467 WLAN_REASON_UNSPECIFIED,
4470 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4474 sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
4476 err = ieee80211_prep_connection(sdata, req->bss, false);
4480 err = ieee80211_probe_auth(sdata);
4482 sta_info_destroy_addr(sdata, req->bss->bssid);
4486 /* hold our own reference */
4487 cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
4491 memset(ifmgd->bssid, 0, ETH_ALEN);
4492 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4493 ifmgd->auth_data = NULL;
4499 static bool ieee80211_usable_wmm_params(struct ieee80211_sub_if_data *sdata,
4500 const u8 *wmm_param, int len)
4508 if (wmm_param[5] != 1 /* version */)
4511 pos = wmm_param + 8;
4514 for (; left >= 4; left -= 4, pos += 4) {
4515 u8 aifsn = pos[0] & 0x0f;
4516 u8 ecwmin = pos[1] & 0x0f;
4517 u8 ecwmax = (pos[1] & 0xf0) >> 4;
4518 int aci = (pos[0] >> 5) & 0x03;
4522 "AP has invalid WMM params (AIFSN=%d for ACI %d), disabling WMM\n",
4526 if (ecwmin > ecwmax) {
4528 "AP has invalid WMM params (ECWmin/max=%d/%d for ACI %d), disabling WMM\n",
4529 ecwmin, ecwmax, aci);
4537 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
4538 struct cfg80211_assoc_request *req)
4540 struct ieee80211_local *local = sdata->local;
4541 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4542 struct ieee80211_bss *bss = (void *)req->bss->priv;
4543 struct ieee80211_mgd_assoc_data *assoc_data;
4544 const struct cfg80211_bss_ies *beacon_ies;
4545 struct ieee80211_supported_band *sband;
4546 const u8 *ssidie, *ht_ie, *vht_ie;
4549 assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL);
4554 ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
4560 memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]);
4561 assoc_data->ssid_len = ssidie[1];
4564 if (ifmgd->associated) {
4565 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4567 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4568 WLAN_REASON_UNSPECIFIED,
4571 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4575 if (ifmgd->auth_data && !ifmgd->auth_data->done) {
4580 if (ifmgd->assoc_data) {
4585 if (ifmgd->auth_data) {
4588 /* keep sta info, bssid if matching */
4589 match = ether_addr_equal(ifmgd->bssid, req->bss->bssid);
4590 ieee80211_destroy_auth_data(sdata, match);
4593 /* prepare assoc data */
4595 ifmgd->beacon_crc_valid = false;
4597 assoc_data->wmm = bss->wmm_used &&
4598 (local->hw.queues >= IEEE80211_NUM_ACS);
4599 if (assoc_data->wmm) {
4600 /* try to check validity of WMM params IE */
4601 const struct cfg80211_bss_ies *ies;
4602 const u8 *wp, *start, *end;
4605 ies = rcu_dereference(req->bss->ies);
4607 end = start + ies->len;
4610 wp = cfg80211_find_vendor_ie(
4612 WLAN_OUI_TYPE_MICROSOFT_WMM,
4613 start, end - start);
4616 start = wp + wp[1] + 2;
4617 /* if this IE is too short, try the next */
4620 /* if this IE is WMM params, we found what we wanted */
4625 if (!wp || !ieee80211_usable_wmm_params(sdata, wp + 2,
4627 assoc_data->wmm = false;
4628 ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
4634 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
4635 * We still associate in non-HT mode (11a/b/g) if any one of these
4636 * ciphers is configured as pairwise.
4637 * We can set this to true for non-11n hardware, that'll be checked
4638 * separately along with the peer capabilities.
4640 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
4641 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
4642 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
4643 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
4644 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4645 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4646 netdev_info(sdata->dev,
4647 "disabling HT/VHT due to WEP/TKIP use\n");
4651 if (req->flags & ASSOC_REQ_DISABLE_HT) {
4652 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4653 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4656 if (req->flags & ASSOC_REQ_DISABLE_VHT)
4657 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4659 /* Also disable HT if we don't support it or the AP doesn't use WMM */
4660 sband = local->hw.wiphy->bands[req->bss->channel->band];
4661 if (!sband->ht_cap.ht_supported ||
4662 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4663 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4664 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4665 if (!bss->wmm_used &&
4666 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4667 netdev_info(sdata->dev,
4668 "disabling HT as WMM/QoS is not supported by the AP\n");
4671 /* disable VHT if we don't support it or the AP doesn't use WMM */
4672 if (!sband->vht_cap.vht_supported ||
4673 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4674 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4675 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4676 if (!bss->wmm_used &&
4677 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4678 netdev_info(sdata->dev,
4679 "disabling VHT as WMM/QoS is not supported by the AP\n");
4682 memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
4683 memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
4684 sizeof(ifmgd->ht_capa_mask));
4686 memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
4687 memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
4688 sizeof(ifmgd->vht_capa_mask));
4690 if (req->ie && req->ie_len) {
4691 memcpy(assoc_data->ie, req->ie, req->ie_len);
4692 assoc_data->ie_len = req->ie_len;
4695 assoc_data->bss = req->bss;
4697 if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
4698 if (ifmgd->powersave)
4699 sdata->smps_mode = IEEE80211_SMPS_DYNAMIC;
4701 sdata->smps_mode = IEEE80211_SMPS_OFF;
4703 sdata->smps_mode = ifmgd->req_smps;
4705 assoc_data->capability = req->bss->capability;
4706 assoc_data->supp_rates = bss->supp_rates;
4707 assoc_data->supp_rates_len = bss->supp_rates_len;
4710 ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION);
4711 if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation))
4712 assoc_data->ap_ht_param =
4713 ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
4715 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4716 vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
4717 if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
4718 memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
4719 sizeof(struct ieee80211_vht_cap));
4721 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4724 if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
4725 (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK),
4726 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
4727 sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
4729 if (bss->wmm_used && bss->uapsd_supported &&
4730 (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) {
4731 assoc_data->uapsd = true;
4732 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
4734 assoc_data->uapsd = false;
4735 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
4738 if (req->prev_bssid)
4739 memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN);
4742 ifmgd->mfp = IEEE80211_MFP_REQUIRED;
4743 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
4745 ifmgd->mfp = IEEE80211_MFP_DISABLED;
4746 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
4749 if (req->flags & ASSOC_REQ_USE_RRM)
4750 ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
4752 ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
4754 if (req->crypto.control_port)
4755 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
4757 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
4759 sdata->control_port_protocol = req->crypto.control_port_ethertype;
4760 sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
4761 sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
4764 /* kick off associate process */
4766 ifmgd->assoc_data = assoc_data;
4767 ifmgd->dtim_period = 0;
4768 ifmgd->have_beacon = false;
4770 err = ieee80211_prep_connection(sdata, req->bss, true);
4775 beacon_ies = rcu_dereference(req->bss->beacon_ies);
4777 if (sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC &&
4780 * Wait up to one beacon interval ...
4781 * should this be more if we miss one?
4783 sdata_info(sdata, "waiting for beacon from %pM\n",
4785 assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
4786 assoc_data->timeout_started = true;
4787 assoc_data->need_beacon = true;
4788 } else if (beacon_ies) {
4789 const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4794 if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) {
4795 const struct ieee80211_tim_ie *tim;
4796 tim = (void *)(tim_ie + 2);
4797 ifmgd->dtim_period = tim->dtim_period;
4798 dtim_count = tim->dtim_count;
4800 ifmgd->have_beacon = true;
4801 assoc_data->timeout = jiffies;
4802 assoc_data->timeout_started = true;
4804 if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
4805 sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
4806 sdata->vif.bss_conf.sync_device_ts =
4807 bss->device_ts_beacon;
4808 sdata->vif.bss_conf.sync_dtim_count = dtim_count;
4811 assoc_data->timeout = jiffies;
4812 assoc_data->timeout_started = true;
4816 run_again(sdata, assoc_data->timeout);
4818 if (bss->corrupt_data) {
4819 char *corrupt_type = "data";
4820 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
4821 if (bss->corrupt_data &
4822 IEEE80211_BSS_CORRUPT_PROBE_RESP)
4823 corrupt_type = "beacon and probe response";
4825 corrupt_type = "beacon";
4826 } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
4827 corrupt_type = "probe response";
4828 sdata_info(sdata, "associating with AP with corrupt %s\n",
4834 memset(ifmgd->bssid, 0, ETH_ALEN);
4835 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4836 ifmgd->assoc_data = NULL;
4842 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
4843 struct cfg80211_deauth_request *req)
4845 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4846 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4847 bool tx = !req->local_state_change;
4849 if (ifmgd->auth_data &&
4850 ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) {
4852 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
4853 req->bssid, req->reason_code,
4854 ieee80211_get_reason_code_string(req->reason_code));
4856 drv_mgd_prepare_tx(sdata->local, sdata);
4857 ieee80211_send_deauth_disassoc(sdata, req->bssid,
4858 IEEE80211_STYPE_DEAUTH,
4859 req->reason_code, tx,
4861 ieee80211_destroy_auth_data(sdata, false);
4862 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4863 IEEE80211_DEAUTH_FRAME_LEN);
4868 if (ifmgd->associated &&
4869 ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
4871 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
4872 req->bssid, req->reason_code,
4873 ieee80211_get_reason_code_string(req->reason_code));
4875 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4876 req->reason_code, tx, frame_buf);
4877 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4878 IEEE80211_DEAUTH_FRAME_LEN);
4885 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
4886 struct cfg80211_disassoc_request *req)
4888 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4890 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4893 * cfg80211 should catch this ... but it's racy since
4894 * we can receive a disassoc frame, process it, hand it
4895 * to cfg80211 while that's in a locked section already
4896 * trying to tell us that the user wants to disconnect.
4898 if (ifmgd->associated != req->bss)
4902 "disassociating from %pM by local choice (Reason: %u=%s)\n",
4903 req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code));
4905 memcpy(bssid, req->bss->bssid, ETH_ALEN);
4906 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
4907 req->reason_code, !req->local_state_change,
4910 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4911 IEEE80211_DEAUTH_FRAME_LEN);
4916 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
4918 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4921 * Make sure some work items will not run after this,
4922 * they will not do anything but might not have been
4923 * cancelled when disconnecting.
4925 cancel_work_sync(&ifmgd->monitor_work);
4926 cancel_work_sync(&ifmgd->beacon_connection_loss_work);
4927 cancel_work_sync(&ifmgd->request_smps_work);
4928 cancel_work_sync(&ifmgd->csa_connection_drop_work);
4929 cancel_work_sync(&ifmgd->chswitch_work);
4930 cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
4933 if (ifmgd->assoc_data) {
4934 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
4935 ieee80211_destroy_assoc_data(sdata, false);
4936 cfg80211_assoc_timeout(sdata->dev, bss);
4938 if (ifmgd->auth_data)
4939 ieee80211_destroy_auth_data(sdata, false);
4940 spin_lock_bh(&ifmgd->teardown_lock);
4941 if (ifmgd->teardown_skb) {
4942 kfree_skb(ifmgd->teardown_skb);
4943 ifmgd->teardown_skb = NULL;
4944 ifmgd->orig_teardown_skb = NULL;
4946 spin_unlock_bh(&ifmgd->teardown_lock);
4947 del_timer_sync(&ifmgd->timer);
4948 sdata_unlock(sdata);
4951 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
4952 enum nl80211_cqm_rssi_threshold_event rssi_event,
4955 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
4957 trace_api_cqm_rssi_notify(sdata, rssi_event);
4959 cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, gfp);
4961 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
4963 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp)
4965 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
4967 trace_api_cqm_beacon_loss_notify(sdata->local, sdata);
4969 cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp);
4971 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);