drivers/i2c/busses/i2c-i801.c

   1 /*
   2     Copyright (c) 1998 - 2002  Frodo Looijaard <[email protected]>,
   3     Philip Edelbrock <[email protected]>, and Mark D. Studebaker
   4     <[email protected]>
   5     Copyright (C) 2007 - 2014  Jean Delvare <[email protected]>
   6     Copyright (C) 2010         Intel Corporation,
   7                                David Woodhouse <[email protected]>
   8
   9     This program is free software; you can redistribute it and/or modify
  10     it under the terms of the GNU General Public License as published by
  11     the Free Software Foundation; either version 2 of the License, or
  12     (at your option) any later version.
  13
  14     This program is distributed in the hope that it will be useful,
  15     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17     GNU General Public License for more details.
  18 */
  19
  20 /*
  21  * Supports the following Intel I/O Controller Hubs (ICH):
  22  *
  23  *                                      I/O                     Block   I2C
  24  *                                      region  SMBus   Block   proc.   block
  25  * Chip name                    PCI ID  size    PEC     buffer  call    read
  26  * ---------------------------------------------------------------------------
  27  * 82801AA (ICH)                0x2413  16      no      no      no      no
  28  * 82801AB (ICH0)               0x2423  16      no      no      no      no
  29  * 82801BA (ICH2)               0x2443  16      no      no      no      no
  30  * 82801CA (ICH3)               0x2483  32      soft    no      no      no
  31  * 82801DB (ICH4)               0x24c3  32      hard    yes     no      no
  32  * 82801E (ICH5)                0x24d3  32      hard    yes     yes     yes
  33  * 6300ESB                      0x25a4  32      hard    yes     yes     yes
  34  * 82801F (ICH6)                0x266a  32      hard    yes     yes     yes
  35  * 6310ESB/6320ESB              0x269b  32      hard    yes     yes     yes
  36  * 82801G (ICH7)                0x27da  32      hard    yes     yes     yes
  37  * 82801H (ICH8)                0x283e  32      hard    yes     yes     yes
  38  * 82801I (ICH9)                0x2930  32      hard    yes     yes     yes
  39  * EP80579 (Tolapai)            0x5032  32      hard    yes     yes     yes
  40  * ICH10                        0x3a30  32      hard    yes     yes     yes
  41  * ICH10                        0x3a60  32      hard    yes     yes     yes
  42  * 5/3400 Series (PCH)          0x3b30  32      hard    yes     yes     yes
  43  * 6 Series (PCH)               0x1c22  32      hard    yes     yes     yes
  44  * Patsburg (PCH)               0x1d22  32      hard    yes     yes     yes
  45  * Patsburg (PCH) IDF           0x1d70  32      hard    yes     yes     yes
  46  * Patsburg (PCH) IDF           0x1d71  32      hard    yes     yes     yes
  47  * Patsburg (PCH) IDF           0x1d72  32      hard    yes     yes     yes
  48  * DH89xxCC (PCH)               0x2330  32      hard    yes     yes     yes
  49  * Panther Point (PCH)          0x1e22  32      hard    yes     yes     yes
  50  * Lynx Point (PCH)             0x8c22  32      hard    yes     yes     yes
  51  * Lynx Point-LP (PCH)          0x9c22  32      hard    yes     yes     yes
  52  * Avoton (SOC)                 0x1f3c  32      hard    yes     yes     yes
  53  * Wellsburg (PCH)              0x8d22  32      hard    yes     yes     yes
  54  * Wellsburg (PCH) MS           0x8d7d  32      hard    yes     yes     yes
  55  * Wellsburg (PCH) MS           0x8d7e  32      hard    yes     yes     yes
  56  * Wellsburg (PCH) MS           0x8d7f  32      hard    yes     yes     yes
  57  * Coleto Creek (PCH)           0x23b0  32      hard    yes     yes     yes
  58  * Wildcat Point (PCH)          0x8ca2  32      hard    yes     yes     yes
  59  * Wildcat Point-LP (PCH)       0x9ca2  32      hard    yes     yes     yes
  60  * BayTrail (SOC)               0x0f12  32      hard    yes     yes     yes
  61  * Sunrise Point-H (PCH)        0xa123  32      hard    yes     yes     yes
  62  * Sunrise Point-LP (PCH)       0x9d23  32      hard    yes     yes     yes
  63  *
  64  * Features supported by this driver:
  65  * Software PEC                         no
  66  * Hardware PEC                         yes
  67  * Block buffer                         yes
  68  * Block process call transaction       no
  69  * I2C block read transaction           yes (doesn't use the block buffer)
  70  * Slave mode                           no
  71  * Interrupt processing                 yes
  72  *
  73  * See the file Documentation/i2c/busses/i2c-i801 for details.
  74  */
  75
  76 #include <linux/interrupt.h>
  77 #include <linux/module.h>
  78 #include <linux/pci.h>
  79 #include <linux/kernel.h>
  80 #include <linux/stddef.h>
  81 #include <linux/delay.h>
  82 #include <linux/ioport.h>
  83 #include <linux/init.h>
  84 #include <linux/i2c.h>
  85 #include <linux/acpi.h>
  86 #include <linux/io.h>
  87 #include <linux/dmi.h>
  88 #include <linux/slab.h>
  89 #include <linux/wait.h>
  90 #include <linux/err.h>
  91
  92 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
  93                 defined CONFIG_DMI
  94 #include <linux/gpio.h>
  95 #include <linux/i2c-mux-gpio.h>
  96 #include <linux/platform_device.h>
  97 #endif
  98
  99 /* I801 SMBus address offsets */
 100 #define SMBHSTSTS(p)    (0 + (p)->smba)
 101 #define SMBHSTCNT(p)    (2 + (p)->smba)
 102 #define SMBHSTCMD(p)    (3 + (p)->smba)
 103 #define SMBHSTADD(p)    (4 + (p)->smba)
 104 #define SMBHSTDAT0(p)   (5 + (p)->smba)
 105 #define SMBHSTDAT1(p)   (6 + (p)->smba)
 106 #define SMBBLKDAT(p)    (7 + (p)->smba)
 107 #define SMBPEC(p)       (8 + (p)->smba)         /* ICH3 and later */
 108 #define SMBAUXSTS(p)    (12 + (p)->smba)        /* ICH4 and later */
 109 #define SMBAUXCTL(p)    (13 + (p)->smba)        /* ICH4 and later */
 110
 111 /* PCI Address Constants */
 112 #define SMBBAR          4
 113 #define SMBPCICTL       0x004
 114 #define SMBPCISTS       0x006
 115 #define SMBHSTCFG       0x040
 116
 117 /* Host status bits for SMBPCISTS */
 118 #define SMBPCISTS_INTS          0x08
 119
 120 /* Control bits for SMBPCICTL */
 121 #define SMBPCICTL_INTDIS        0x0400
 122
 123 /* Host configuration bits for SMBHSTCFG */
 124 #define SMBHSTCFG_HST_EN        1
 125 #define SMBHSTCFG_SMB_SMI_EN    2
 126 #define SMBHSTCFG_I2C_EN        4
 127
 128 /* Auxiliary control register bits, ICH4+ only */
 129 #define SMBAUXCTL_CRC           1
 130 #define SMBAUXCTL_E32B          2
 131
 132 /* Other settings */
 133 #define MAX_RETRIES             400
 134
 135 /* I801 command constants */
 136 #define I801_QUICK              0x00
 137 #define I801_BYTE               0x04
 138 #define I801_BYTE_DATA          0x08
 139 #define I801_WORD_DATA          0x0C
 140 #define I801_PROC_CALL          0x10    /* unimplemented */
 141 #define I801_BLOCK_DATA         0x14
 142 #define I801_I2C_BLOCK_DATA     0x18    /* ICH5 and later */
 143
 144 /* I801 Host Control register bits */
 145 #define SMBHSTCNT_INTREN        0x01
 146 #define SMBHSTCNT_KILL          0x02
 147 #define SMBHSTCNT_LAST_BYTE     0x20
 148 #define SMBHSTCNT_START         0x40
 149 #define SMBHSTCNT_PEC_EN        0x80    /* ICH3 and later */
 150
 151 /* I801 Hosts Status register bits */
 152 #define SMBHSTSTS_BYTE_DONE     0x80
 153 #define SMBHSTSTS_INUSE_STS     0x40
 154 #define SMBHSTSTS_SMBALERT_STS  0x20
 155 #define SMBHSTSTS_FAILED        0x10
 156 #define SMBHSTSTS_BUS_ERR       0x08
 157 #define SMBHSTSTS_DEV_ERR       0x04
 158 #define SMBHSTSTS_INTR          0x02
 159 #define SMBHSTSTS_HOST_BUSY     0x01
 160
 161 #define STATUS_ERROR_FLAGS      (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
 162                                  SMBHSTSTS_DEV_ERR)
 163
 164 #define STATUS_FLAGS            (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
 165                                  STATUS_ERROR_FLAGS)
 166
 167 /* Older devices have their ID defined in <linux/pci_ids.h> */
 168 #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS              0x0f12
 169 #define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS              0x2292
 170 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS           0x1c22
 171 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS              0x1d22
 172 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
 173 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0         0x1d70
 174 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1         0x1d71
 175 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2         0x1d72
 176 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS          0x1e22
 177 #define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS                0x1f3c
 178 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS              0x2330
 179 #define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS           0x23b0
 180 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS         0x3b30
 181 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS             0x8c22
 182 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS          0x8ca2
 183 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS             0x8d22
 184 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0         0x8d7d
 185 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1         0x8d7e
 186 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2         0x8d7f
 187 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS          0x9c22
 188 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS       0x9ca2
 189 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS        0xa123
 190 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS       0x9d23
 191
 192 struct i801_mux_config {
 193         char *gpio_chip;
 194         unsigned values[3];
 195         int n_values;
 196         unsigned classes[3];
 197         unsigned gpios[2];              /* Relative to gpio_chip->base */
 198         int n_gpios;
 199 };
 200
 201 struct i801_priv {
 202         struct i2c_adapter adapter;
 203         unsigned long smba;
 204         unsigned char original_hstcfg;
 205         struct pci_dev *pci_dev;
 206         unsigned int features;
 207
 208         /* isr processing */
 209         wait_queue_head_t waitq;
 210         u8 status;
 211
 212         /* Command state used by isr for byte-by-byte block transactions */
 213         u8 cmd;
 214         bool is_read;
 215         int count;
 216         int len;
 217         u8 *data;
 218
 219 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
 220                 defined CONFIG_DMI
 221         const struct i801_mux_config *mux_drvdata;
 222         struct platform_device *mux_pdev;
 223 #endif
 224 };
 225
 226 static struct pci_driver i801_driver;
 227
 228 #define FEATURE_SMBUS_PEC       (1 << 0)
 229 #define FEATURE_BLOCK_BUFFER    (1 << 1)
 230 #define FEATURE_BLOCK_PROC      (1 << 2)
 231 #define FEATURE_I2C_BLOCK_READ  (1 << 3)
 232 #define FEATURE_IRQ             (1 << 4)
 233 /* Not really a feature, but it's convenient to handle it as such */
 234 #define FEATURE_IDF             (1 << 15)
 235
 236 static const char *i801_feature_names[] = {
 237         "SMBus PEC",
 238         "Block buffer",
 239         "Block process call",
 240         "I2C block read",
 241         "Interrupt",
 242 };
 243
 244 static unsigned int disable_features;
 245 module_param(disable_features, uint, S_IRUGO | S_IWUSR);
 246 MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
 247         "\t\t  0x01  disable SMBus PEC\n"
 248         "\t\t  0x02  disable the block buffer\n"
 249         "\t\t  0x08  disable the I2C block read functionality\n"
 250         "\t\t  0x10  don't use interrupts ");
 251
 252 /* Make sure the SMBus host is ready to start transmitting.
 253    Return 0 if it is, -EBUSY if it is not. */
 254 static int i801_check_pre(struct i801_priv *priv)
 255 {
 256         int status;
 257
 258         status = inb_p(SMBHSTSTS(priv));
 259         if (status & SMBHSTSTS_HOST_BUSY) {
 260                 dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n");
 261                 return -EBUSY;
 262         }
 263
 264         status &= STATUS_FLAGS;
 265         if (status) {
 266                 dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n",
 267                         status);
 268                 outb_p(status, SMBHSTSTS(priv));
 269                 status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
 270                 if (status) {
 271                         dev_err(&priv->pci_dev->dev,
 272                                 "Failed clearing status flags (%02x)\n",
 273                                 status);
 274                         return -EBUSY;
 275                 }
 276         }
 277
 278         return 0;
 279 }
 280
 281 /*
 282  * Convert the status register to an error code, and clear it.
 283  * Note that status only contains the bits we want to clear, not the
 284  * actual register value.
 285  */
 286 static int i801_check_post(struct i801_priv *priv, int status)
 287 {
 288         int result = 0;
 289
 290         /*
 291          * If the SMBus is still busy, we give up
 292          * Note: This timeout condition only happens when using polling
 293          * transactions.  For interrupt operation, NAK/timeout is indicated by
 294          * DEV_ERR.
 295          */
 296         if (unlikely(status < 0)) {
 297                 dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
 298                 /* try to stop the current command */
 299                 dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
 300                 outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
 301                        SMBHSTCNT(priv));
 302                 usleep_range(1000, 2000);
 303                 outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
 304                        SMBHSTCNT(priv));
 305
 306                 /* Check if it worked */
 307                 status = inb_p(SMBHSTSTS(priv));
 308                 if ((status & SMBHSTSTS_HOST_BUSY) ||
 309                     !(status & SMBHSTSTS_FAILED))
 310                         dev_err(&priv->pci_dev->dev,
 311                                 "Failed terminating the transaction\n");
 312                 outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
 313                 return -ETIMEDOUT;
 314         }
 315
 316         if (status & SMBHSTSTS_FAILED) {
 317                 result = -EIO;
 318                 dev_err(&priv->pci_dev->dev, "Transaction failed\n");
 319         }
 320         if (status & SMBHSTSTS_DEV_ERR) {
 321                 result = -ENXIO;
 322                 dev_dbg(&priv->pci_dev->dev, "No response\n");
 323         }
 324         if (status & SMBHSTSTS_BUS_ERR) {
 325                 result = -EAGAIN;
 326                 dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
 327         }
 328
 329         /* Clear status flags except BYTE_DONE, to be cleared by caller */
 330         outb_p(status, SMBHSTSTS(priv));
 331
 332         return result;
 333 }
 334
 335 /* Wait for BUSY being cleared and either INTR or an error flag being set */
 336 static int i801_wait_intr(struct i801_priv *priv)
 337 {
 338         int timeout = 0;
 339         int status;
 340
 341         /* We will always wait for a fraction of a second! */
 342         do {
 343                 usleep_range(250, 500);
 344                 status = inb_p(SMBHSTSTS(priv));
 345         } while (((status & SMBHSTSTS_HOST_BUSY) ||
 346                   !(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR))) &&
 347                  (timeout++ < MAX_RETRIES));
 348
 349         if (timeout > MAX_RETRIES) {
 350                 dev_dbg(&priv->pci_dev->dev, "INTR Timeout!\n");
 351                 return -ETIMEDOUT;
 352         }
 353         return status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR);
 354 }
 355
 356 /* Wait for either BYTE_DONE or an error flag being set */
 357 static int i801_wait_byte_done(struct i801_priv *priv)
 358 {
 359         int timeout = 0;
 360         int status;
 361
 362         /* We will always wait for a fraction of a second! */
 363         do {
 364                 usleep_range(250, 500);
 365                 status = inb_p(SMBHSTSTS(priv));
 366         } while (!(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) &&
 367                  (timeout++ < MAX_RETRIES));
 368
 369         if (timeout > MAX_RETRIES) {
 370                 dev_dbg(&priv->pci_dev->dev, "BYTE_DONE Timeout!\n");
 371                 return -ETIMEDOUT;
 372         }
 373         return status & STATUS_ERROR_FLAGS;
 374 }
 375
 376 static int i801_transaction(struct i801_priv *priv, int xact)
 377 {
 378         int status;
 379         int result;
 380         const struct i2c_adapter *adap = &priv->adapter;
 381
 382         result = i801_check_pre(priv);
 383         if (result < 0)
 384                 return result;
 385
 386         if (priv->features & FEATURE_IRQ) {
 387                 outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START,
 388                        SMBHSTCNT(priv));
 389                 result = wait_event_timeout(priv->waitq,
 390                                             (status = priv->status),
 391                                             adap->timeout);
 392                 if (!result) {
 393                         status = -ETIMEDOUT;
 394                         dev_warn(&priv->pci_dev->dev,
 395                                  "Timeout waiting for interrupt!\n");
 396                 }
 397                 priv->status = 0;
 398                 return i801_check_post(priv, status);
 399         }
 400
 401         /* the current contents of SMBHSTCNT can be overwritten, since PEC,
 402          * SMBSCMD are passed in xact */
 403         outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
 404
 405         status = i801_wait_intr(priv);
 406         return i801_check_post(priv, status);
 407 }
 408
 409 static int i801_block_transaction_by_block(struct i801_priv *priv,
 410                                            union i2c_smbus_data *data,
 411                                            char read_write, int hwpec)
 412 {
 413         int i, len;
 414         int status;
 415
 416         inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
 417
 418         /* Use 32-byte buffer to process this transaction */
 419         if (read_write == I2C_SMBUS_WRITE) {
 420                 len = data->block[0];
 421                 outb_p(len, SMBHSTDAT0(priv));
 422                 for (i = 0; i < len; i++)
 423                         outb_p(data->block[i+1], SMBBLKDAT(priv));
 424         }
 425
 426         status = i801_transaction(priv, I801_BLOCK_DATA |
 427                                   (hwpec ? SMBHSTCNT_PEC_EN : 0));
 428         if (status)
 429                 return status;
 430
 431         if (read_write == I2C_SMBUS_READ) {
 432                 len = inb_p(SMBHSTDAT0(priv));
 433                 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
 434                         return -EPROTO;
 435
 436                 data->block[0] = len;
 437                 for (i = 0; i < len; i++)
 438                         data->block[i + 1] = inb_p(SMBBLKDAT(priv));
 439         }
 440         return 0;
 441 }
 442
 443 static void i801_isr_byte_done(struct i801_priv *priv)
 444 {
 445         if (priv->is_read) {
 446                 /* For SMBus block reads, length is received with first byte */
 447                 if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
 448                     (priv->count == 0)) {
 449                         priv->len = inb_p(SMBHSTDAT0(priv));
 450                         if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
 451                                 dev_err(&priv->pci_dev->dev,
 452                                         "Illegal SMBus block read size %d\n",
 453                                         priv->len);
 454                                 /* FIXME: Recover */
 455                                 priv->len = I2C_SMBUS_BLOCK_MAX;
 456                         } else {
 457                                 dev_dbg(&priv->pci_dev->dev,
 458                                         "SMBus block read size is %d\n",
 459                                         priv->len);
 460                         }
 461                         priv->data[-1] = priv->len;
 462                 }
 463
 464                 /* Read next byte */
 465                 if (priv->count < priv->len)
 466                         priv->data[priv->count++] = inb(SMBBLKDAT(priv));
 467                 else
 468                         dev_dbg(&priv->pci_dev->dev,
 469                                 "Discarding extra byte on block read\n");
 470
 471                 /* Set LAST_BYTE for last byte of read transaction */
 472                 if (priv->count == priv->len - 1)
 473                         outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE,
 474                                SMBHSTCNT(priv));
 475         } else if (priv->count < priv->len - 1) {
 476                 /* Write next byte, except for IRQ after last byte */
 477                 outb_p(priv->data[++priv->count], SMBBLKDAT(priv));
 478         }
 479
 480         /* Clear BYTE_DONE to continue with next byte */
 481         outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
 482 }
 483
 484 /*
 485  * There are two kinds of interrupts:
 486  *
 487  * 1) i801 signals transaction completion with one of these interrupts:
 488  *      INTR - Success
 489  *      DEV_ERR - Invalid command, NAK or communication timeout
 490  *      BUS_ERR - SMI# transaction collision
 491  *      FAILED - transaction was canceled due to a KILL request
 492  *    When any of these occur, update ->status and wake up the waitq.
 493  *    ->status must be cleared before kicking off the next transaction.
 494  *
 495  * 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
 496  *    occurs for each byte of a byte-by-byte to prepare the next byte.
 497  */
 498 static irqreturn_t i801_isr(int irq, void *dev_id)
 499 {
 500         struct i801_priv *priv = dev_id;
 501         u16 pcists;
 502         u8 status;
 503
 504         /* Confirm this is our interrupt */
 505         pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
 506         if (!(pcists & SMBPCISTS_INTS))
 507                 return IRQ_NONE;
 508
 509         status = inb_p(SMBHSTSTS(priv));
 510         if (status & SMBHSTSTS_BYTE_DONE)
 511                 i801_isr_byte_done(priv);
 512
 513         /*
 514          * Clear irq sources and report transaction result.
 515          * ->status must be cleared before the next transaction is started.
 516          */
 517         status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS;
 518         if (status) {
 519                 outb_p(status, SMBHSTSTS(priv));
 520                 priv->status |= status;
 521                 wake_up(&priv->waitq);
 522         }
 523
 524         return IRQ_HANDLED;
 525 }
 526
 527 /*
 528  * For "byte-by-byte" block transactions:
 529  *   I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1
 530  *   I2C read uses cmd=I801_I2C_BLOCK_DATA
 531  */
 532 static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 533                                                union i2c_smbus_data *data,
 534                                                char read_write, int command,
 535                                                int hwpec)
 536 {
 537         int i, len;
 538         int smbcmd;
 539         int status;
 540         int result;
 541         const struct i2c_adapter *adap = &priv->adapter;
 542
 543         result = i801_check_pre(priv);
 544         if (result < 0)
 545                 return result;
 546
 547         len = data->block[0];
 548
 549         if (read_write == I2C_SMBUS_WRITE) {
 550                 outb_p(len, SMBHSTDAT0(priv));
 551                 outb_p(data->block[1], SMBBLKDAT(priv));
 552         }
 553
 554         if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
 555             read_write == I2C_SMBUS_READ)
 556                 smbcmd = I801_I2C_BLOCK_DATA;
 557         else
 558                 smbcmd = I801_BLOCK_DATA;
 559
 560         if (priv->features & FEATURE_IRQ) {
 561                 priv->is_read = (read_write == I2C_SMBUS_READ);
 562                 if (len == 1 && priv->is_read)
 563                         smbcmd |= SMBHSTCNT_LAST_BYTE;
 564                 priv->cmd = smbcmd | SMBHSTCNT_INTREN;
 565                 priv->len = len;
 566                 priv->count = 0;
 567                 priv->data = &data->block[1];
 568
 569                 outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv));
 570                 result = wait_event_timeout(priv->waitq,
 571                                             (status = priv->status),
 572                                             adap->timeout);
 573                 if (!result) {
 574                         status = -ETIMEDOUT;
 575                         dev_warn(&priv->pci_dev->dev,
 576                                  "Timeout waiting for interrupt!\n");
 577                 }
 578                 priv->status = 0;
 579                 return i801_check_post(priv, status);
 580         }
 581
 582         for (i = 1; i <= len; i++) {
 583                 if (i == len && read_write == I2C_SMBUS_READ)
 584                         smbcmd |= SMBHSTCNT_LAST_BYTE;
 585                 outb_p(smbcmd, SMBHSTCNT(priv));
 586
 587                 if (i == 1)
 588                         outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
 589                                SMBHSTCNT(priv));
 590
 591                 status = i801_wait_byte_done(priv);
 592                 if (status)
 593                         goto exit;
 594
 595                 if (i == 1 && read_write == I2C_SMBUS_READ
 596                  && command != I2C_SMBUS_I2C_BLOCK_DATA) {
 597                         len = inb_p(SMBHSTDAT0(priv));
 598                         if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
 599                                 dev_err(&priv->pci_dev->dev,
 600                                         "Illegal SMBus block read size %d\n",
 601                                         len);
 602                                 /* Recover */
 603                                 while (inb_p(SMBHSTSTS(priv)) &
 604                                        SMBHSTSTS_HOST_BUSY)
 605                                         outb_p(SMBHSTSTS_BYTE_DONE,
 606                                                SMBHSTSTS(priv));
 607                                 outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
 608                                 return -EPROTO;
 609                         }
 610                         data->block[0] = len;
 611                 }
 612
 613                 /* Retrieve/store value in SMBBLKDAT */
 614                 if (read_write == I2C_SMBUS_READ)
 615                         data->block[i] = inb_p(SMBBLKDAT(priv));
 616                 if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
 617                         outb_p(data->block[i+1], SMBBLKDAT(priv));
 618
 619                 /* signals SMBBLKDAT ready */
 620                 outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
 621         }
 622
 623         status = i801_wait_intr(priv);
 624 exit:
 625         return i801_check_post(priv, status);
 626 }
 627
 628 static int i801_set_block_buffer_mode(struct i801_priv *priv)
 629 {
 630         outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
 631         if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
 632                 return -EIO;
 633         return 0;
 634 }
 635
 636 /* Block transaction function */
 637 static int i801_block_transaction(struct i801_priv *priv,
 638                                   union i2c_smbus_data *data, char read_write,
 639                                   int command, int hwpec)
 640 {
 641         int result = 0;
 642         unsigned char hostc;
 643
 644         if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
 645                 if (read_write == I2C_SMBUS_WRITE) {
 646                         /* set I2C_EN bit in configuration register */
 647                         pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
 648                         pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
 649                                               hostc | SMBHSTCFG_I2C_EN);
 650                 } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
 651                         dev_err(&priv->pci_dev->dev,
 652                                 "I2C block read is unsupported!\n");
 653                         return -EOPNOTSUPP;
 654                 }
 655         }
 656
 657         if (read_write == I2C_SMBUS_WRITE
 658          || command == I2C_SMBUS_I2C_BLOCK_DATA) {
 659                 if (data->block[0] < 1)
 660                         data->block[0] = 1;
 661                 if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
 662                         data->block[0] = I2C_SMBUS_BLOCK_MAX;
 663         } else {
 664                 data->block[0] = 32;    /* max for SMBus block reads */
 665         }
 666
 667         /* Experience has shown that the block buffer can only be used for
 668            SMBus (not I2C) block transactions, even though the datasheet
 669            doesn't mention this limitation. */
 670         if ((priv->features & FEATURE_BLOCK_BUFFER)
 671          && command != I2C_SMBUS_I2C_BLOCK_DATA
 672          && i801_set_block_buffer_mode(priv) == 0)
 673                 result = i801_block_transaction_by_block(priv, data,
 674                                                          read_write, hwpec);
 675         else
 676                 result = i801_block_transaction_byte_by_byte(priv, data,
 677                                                              read_write,
 678                                                              command, hwpec);
 679
 680         if (command == I2C_SMBUS_I2C_BLOCK_DATA
 681          && read_write == I2C_SMBUS_WRITE) {
 682                 /* restore saved configuration register value */
 683                 pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
 684         }
 685         return result;
 686 }
 687
 688 /* Return negative errno on error. */
 689 static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 690                        unsigned short flags, char read_write, u8 command,
 691                        int size, union i2c_smbus_data *data)
 692 {
 693         int hwpec;
 694         int block = 0;
 695         int ret, xact = 0;
 696         struct i801_priv *priv = i2c_get_adapdata(adap);
 697
 698         hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
 699                 && size != I2C_SMBUS_QUICK
 700                 && size != I2C_SMBUS_I2C_BLOCK_DATA;
 701
 702         switch (size) {
 703         case I2C_SMBUS_QUICK:
 704                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 705                        SMBHSTADD(priv));
 706                 xact = I801_QUICK;
 707                 break;
 708         case I2C_SMBUS_BYTE:
 709                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 710                        SMBHSTADD(priv));
 711                 if (read_write == I2C_SMBUS_WRITE)
 712                         outb_p(command, SMBHSTCMD(priv));
 713                 xact = I801_BYTE;
 714                 break;
 715         case I2C_SMBUS_BYTE_DATA:
 716                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 717                        SMBHSTADD(priv));
 718                 outb_p(command, SMBHSTCMD(priv));
 719                 if (read_write == I2C_SMBUS_WRITE)
 720                         outb_p(data->byte, SMBHSTDAT0(priv));
 721                 xact = I801_BYTE_DATA;
 722                 break;
 723         case I2C_SMBUS_WORD_DATA:
 724                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 725                        SMBHSTADD(priv));
 726                 outb_p(command, SMBHSTCMD(priv));
 727                 if (read_write == I2C_SMBUS_WRITE) {
 728                         outb_p(data->word & 0xff, SMBHSTDAT0(priv));
 729                         outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
 730                 }
 731                 xact = I801_WORD_DATA;
 732                 break;
 733         case I2C_SMBUS_BLOCK_DATA:
 734                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 735                        SMBHSTADD(priv));
 736                 outb_p(command, SMBHSTCMD(priv));
 737                 block = 1;
 738                 break;
 739         case I2C_SMBUS_I2C_BLOCK_DATA:
 740                 /* NB: page 240 of ICH5 datasheet shows that the R/#W
 741                  * bit should be cleared here, even when reading */
 742                 outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
 743                 if (read_write == I2C_SMBUS_READ) {
 744                         /* NB: page 240 of ICH5 datasheet also shows
 745                          * that DATA1 is the cmd field when reading */
 746                         outb_p(command, SMBHSTDAT1(priv));
 747                 } else
 748                         outb_p(command, SMBHSTCMD(priv));
 749                 block = 1;
 750                 break;
 751         default:
 752                 dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
 753                         size);
 754                 return -EOPNOTSUPP;
 755         }
 756
 757         if (hwpec)      /* enable/disable hardware PEC */
 758                 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
 759         else
 760                 outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
 761                        SMBAUXCTL(priv));
 762
 763         if (block)
 764                 ret = i801_block_transaction(priv, data, read_write, size,
 765                                              hwpec);
 766         else
 767                 ret = i801_transaction(priv, xact);
 768
 769         /* Some BIOSes don't like it when PEC is enabled at reboot or resume
 770            time, so we forcibly disable it after every transaction. Turn off
 771            E32B for the same reason. */
 772         if (hwpec || block)
 773                 outb_p(inb_p(SMBAUXCTL(priv)) &
 774                        ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
 775
 776         if (block)
 777                 return ret;
 778         if (ret)
 779                 return ret;
 780         if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
 781                 return 0;
 782
 783         switch (xact & 0x7f) {
 784         case I801_BYTE: /* Result put in SMBHSTDAT0 */
 785         case I801_BYTE_DATA:
 786                 data->byte = inb_p(SMBHSTDAT0(priv));
 787                 break;
 788         case I801_WORD_DATA:
 789                 data->word = inb_p(SMBHSTDAT0(priv)) +
 790                              (inb_p(SMBHSTDAT1(priv)) << 8);
 791                 break;
 792         }
 793         return 0;
 794 }
 795
 796
 797 static u32 i801_func(struct i2c_adapter *adapter)
 798 {
 799         struct i801_priv *priv = i2c_get_adapdata(adapter);
 800
 801         return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 802                I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
 803                I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
 804                ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
 805                ((priv->features & FEATURE_I2C_BLOCK_READ) ?
 806                 I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
 807 }
 808
 809 static const struct i2c_algorithm smbus_algorithm = {
 810         .smbus_xfer     = i801_access,
 811         .functionality  = i801_func,
 812 };
 813
 814 static const struct pci_device_id i801_ids[] = {
 815         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
 816         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
 817         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
 818         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) },
 819         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) },
 820         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) },
 821         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) },
 822         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
 823         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
 824         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
 825         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
 826         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
 827         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EP80579_1) },
 828         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
 829         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
 830         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS) },
 831         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) },
 832         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS) },
 833         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) },
 834         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
 835         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
 836         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
 837         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
 838         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
 839         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
 840         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
 841         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS) },
 842         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
 843         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
 844         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
 845         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
 846         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) },
 847         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
 848         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
 849         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
 850         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
 851         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
 852         { 0, }
 853 };
 854
 855 MODULE_DEVICE_TABLE(pci, i801_ids);
 856
 857 #if defined CONFIG_X86 && defined CONFIG_DMI
 858 static unsigned char apanel_addr;
 859
 860 /* Scan the system ROM for the signature "FJKEYINF" */
 861 static __init const void __iomem *bios_signature(const void __iomem *bios)
 862 {
 863         ssize_t offset;
 864         const unsigned char signature[] = "FJKEYINF";
 865
 866         for (offset = 0; offset < 0x10000; offset += 0x10) {
 867                 if (check_signature(bios + offset, signature,
 868                                     sizeof(signature)-1))
 869                         return bios + offset;
 870         }
 871         return NULL;
 872 }
 873
 874 static void __init input_apanel_init(void)
 875 {
 876         void __iomem *bios;
 877         const void __iomem *p;
 878
 879         bios = ioremap(0xF0000, 0x10000); /* Can't fail */
 880         p = bios_signature(bios);
 881         if (p) {
 882                 /* just use the first address */
 883                 apanel_addr = readb(p + 8 + 3) >> 1;
 884         }
 885         iounmap(bios);
 886 }
 887
 888 struct dmi_onboard_device_info {
 889         const char *name;
 890         u8 type;
 891         unsigned short i2c_addr;
 892         const char *i2c_type;
 893 };
 894
 895 static const struct dmi_onboard_device_info dmi_devices[] = {
 896         { "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
 897         { "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
 898         { "Hades",  DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
 899 };
 900
 901 static void dmi_check_onboard_device(u8 type, const char *name,
 902                                      struct i2c_adapter *adap)
 903 {
 904         int i;
 905         struct i2c_board_info info;
 906
 907         for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
 908                 /* & ~0x80, ignore enabled/disabled bit */
 909                 if ((type & ~0x80) != dmi_devices[i].type)
 910                         continue;
 911                 if (strcasecmp(name, dmi_devices[i].name))
 912                         continue;
 913
 914                 memset(&info, 0, sizeof(struct i2c_board_info));
 915                 info.addr = dmi_devices[i].i2c_addr;
 916                 strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
 917                 i2c_new_device(adap, &info);
 918                 break;
 919         }
 920 }
 921
 922 /* We use our own function to check for onboard devices instead of
 923    dmi_find_device() as some buggy BIOS's have the devices we are interested
 924    in marked as disabled */
 925 static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap)
 926 {
 927         int i, count;
 928
 929         if (dm->type != 10)
 930                 return;
 931
 932         count = (dm->length - sizeof(struct dmi_header)) / 2;
 933         for (i = 0; i < count; i++) {
 934                 const u8 *d = (char *)(dm + 1) + (i * 2);
 935                 const char *name = ((char *) dm) + dm->length;
 936                 u8 type = d[0];
 937                 u8 s = d[1];
 938
 939                 if (!s)
 940                         continue;
 941                 s--;
 942                 while (s > 0 && name[0]) {
 943                         name += strlen(name) + 1;
 944                         s--;
 945                 }
 946                 if (name[0] == 0) /* Bogus string reference */
 947                         continue;
 948
 949                 dmi_check_onboard_device(type, name, adap);
 950         }
 951 }
 952
 953 /* Register optional slaves */
 954 static void i801_probe_optional_slaves(struct i801_priv *priv)
 955 {
 956         /* Only register slaves on main SMBus channel */
 957         if (priv->features & FEATURE_IDF)
 958                 return;
 959
 960         if (apanel_addr) {
 961                 struct i2c_board_info info;
 962
 963                 memset(&info, 0, sizeof(struct i2c_board_info));
 964                 info.addr = apanel_addr;
 965                 strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
 966                 i2c_new_device(&priv->adapter, &info);
 967         }
 968
 969         if (dmi_name_in_vendors("FUJITSU"))
 970                 dmi_walk(dmi_check_onboard_devices, &priv->adapter);
 971 }
 972 #else
 973 static void __init input_apanel_init(void) {}
 974 static void i801_probe_optional_slaves(struct i801_priv *priv) {}
 975 #endif  /* CONFIG_X86 && CONFIG_DMI */
 976
 977 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
 978                 defined CONFIG_DMI
 979 static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
 980         .gpio_chip = "gpio_ich",
 981         .values = { 0x02, 0x03 },
 982         .n_values = 2,
 983         .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
 984         .gpios = { 52, 53 },
 985         .n_gpios = 2,
 986 };
 987
 988 static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
 989         .gpio_chip = "gpio_ich",
 990         .values = { 0x02, 0x03, 0x01 },
 991         .n_values = 3,
 992         .classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
 993         .gpios = { 52, 53 },
 994         .n_gpios = 2,
 995 };
 996
 997 static const struct dmi_system_id mux_dmi_table[] = {
 998         {
 999                 .matches = {
1000                         DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1001                         DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"),
1002                 },
1003                 .driver_data = &i801_mux_config_asus_z8_d12,
1004         },
1005         {
1006                 .matches = {
1007                         DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1008                         DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"),
1009                 },
1010                 .driver_data = &i801_mux_config_asus_z8_d12,
1011         },
1012         {
1013                 .matches = {
1014                         DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1015                         DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"),
1016                 },
1017                 .driver_data = &i801_mux_config_asus_z8_d12,
1018         },
1019         {
1020                 .matches = {
1021                         DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1022                         DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"),
1023                 },
1024                 .driver_data = &i801_mux_config_asus_z8_d12,
1025         },
1026         {
1027                 .matches = {
1028                         DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1029                         DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"),
1030                 },
1031                 .driver_data = &i801_mux_config_asus_z8_d12,
1032         },
1033         {
1034                 .matches = {
1035                         DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1036                         DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"),
1037                 },
1038                 .driver_data = &i801_mux_config_asus_z8_d12,
1039         },
1040         {
1041                 .matches = {
1042                         DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1043                         DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"),
1044                 },
1045                 .driver_data = &i801_mux_config_asus_z8_d18,
1046         },
1047         {
1048                 .matches = {
1049                         DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1050                         DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"),
1051                 },
1052                 .driver_data = &i801_mux_config_asus_z8_d18,
1053         },
1054         {
1055                 .matches = {
1056                         DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
1057                         DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"),
1058                 },
1059                 .driver_data = &i801_mux_config_asus_z8_d12,
1060         },
1061         { }
1062 };
1063
1064 /* Setup multiplexing if needed */
1065 static int i801_add_mux(struct i801_priv *priv)
1066 {
1067         struct device *dev = &priv->adapter.dev;
1068         const struct i801_mux_config *mux_config;
1069         struct i2c_mux_gpio_platform_data gpio_data;
1070         int err;
1071
1072         if (!priv->mux_drvdata)
1073                 return 0;
1074         mux_config = priv->mux_drvdata;
1075
1076         /* Prepare the platform data */
1077         memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data));
1078         gpio_data.parent = priv->adapter.nr;
1079         gpio_data.values = mux_config->values;
1080         gpio_data.n_values = mux_config->n_values;
1081         gpio_data.classes = mux_config->classes;
1082         gpio_data.gpio_chip = mux_config->gpio_chip;
1083         gpio_data.gpios = mux_config->gpios;
1084         gpio_data.n_gpios = mux_config->n_gpios;
1085         gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
1086
1087         /* Register the mux device */
1088         priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio",
1089                                 PLATFORM_DEVID_AUTO, &gpio_data,
1090                                 sizeof(struct i2c_mux_gpio_platform_data));
1091         if (IS_ERR(priv->mux_pdev)) {
1092                 err = PTR_ERR(priv->mux_pdev);
1093                 priv->mux_pdev = NULL;
1094                 dev_err(dev, "Failed to register i2c-mux-gpio device\n");
1095                 return err;
1096         }
1097
1098         return 0;
1099 }
1100
1101 static void i801_del_mux(struct i801_priv *priv)
1102 {
1103         if (priv->mux_pdev)
1104                 platform_device_unregister(priv->mux_pdev);
1105 }
1106
1107 static unsigned int i801_get_adapter_class(struct i801_priv *priv)
1108 {
1109         const struct dmi_system_id *id;
1110         const struct i801_mux_config *mux_config;
1111         unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
1112         int i;
1113
1114         id = dmi_first_match(mux_dmi_table);
1115         if (id) {
1116                 /* Remove branch classes from trunk */
1117                 mux_config = id->driver_data;
1118                 for (i = 0; i < mux_config->n_values; i++)
1119                         class &= ~mux_config->classes[i];
1120
1121                 /* Remember for later */
1122                 priv->mux_drvdata = mux_config;
1123         }
1124
1125         return class;
1126 }
1127 #else
1128 static inline int i801_add_mux(struct i801_priv *priv) { return 0; }
1129 static inline void i801_del_mux(struct i801_priv *priv) { }
1130
1131 static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
1132 {
1133         return I2C_CLASS_HWMON | I2C_CLASS_SPD;
1134 }
1135 #endif
1136
1137 static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
1138 {
1139         unsigned char temp;
1140         int err, i;
1141         struct i801_priv *priv;
1142
1143         priv = kzalloc(sizeof(*priv), GFP_KERNEL);
1144         if (!priv)
1145                 return -ENOMEM;
1146
1147         i2c_set_adapdata(&priv->adapter, priv);
1148         priv->adapter.owner = THIS_MODULE;
1149         priv->adapter.class = i801_get_adapter_class(priv);
1150         priv->adapter.algo = &smbus_algorithm;
1151
1152         priv->pci_dev = dev;
1153         switch (dev->device) {
1154         case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
1155         case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
1156         case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
1157         case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0:
1158         case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
1159         case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
1160                 priv->features |= FEATURE_IDF;
1161                 /* fall through */
1162         default:
1163                 priv->features |= FEATURE_I2C_BLOCK_READ;
1164                 priv->features |= FEATURE_IRQ;
1165                 /* fall through */
1166         case PCI_DEVICE_ID_INTEL_82801DB_3:
1167                 priv->features |= FEATURE_SMBUS_PEC;
1168                 priv->features |= FEATURE_BLOCK_BUFFER;
1169                 /* fall through */
1170         case PCI_DEVICE_ID_INTEL_82801CA_3:
1171         case PCI_DEVICE_ID_INTEL_82801BA_2:
1172         case PCI_DEVICE_ID_INTEL_82801AB_3:
1173         case PCI_DEVICE_ID_INTEL_82801AA_3:
1174                 break;
1175         }
1176
1177         /* Disable features on user request */
1178         for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
1179                 if (priv->features & disable_features & (1 << i))
1180                         dev_notice(&dev->dev, "%s disabled by user\n",
1181                                    i801_feature_names[i]);
1182         }
1183         priv->features &= ~disable_features;
1184
1185         err = pci_enable_device(dev);
1186         if (err) {
1187                 dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
1188                         err);
1189                 goto exit;
1190         }
1191
1192         /* Determine the address of the SMBus area */
1193         priv->smba = pci_resource_start(dev, SMBBAR);
1194         if (!priv->smba) {
1195                 dev_err(&dev->dev, "SMBus base address uninitialized, "
1196                         "upgrade BIOS\n");
1197                 err = -ENODEV;
1198                 goto exit;
1199         }
1200
1201         err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
1202         if (err) {
1203                 err = -ENODEV;
1204                 goto exit;
1205         }
1206
1207         err = pci_request_region(dev, SMBBAR, i801_driver.name);
1208         if (err) {
1209                 dev_err(&dev->dev, "Failed to request SMBus region "
1210                         "0x%lx-0x%Lx\n", priv->smba,
1211                         (unsigned long long)pci_resource_end(dev, SMBBAR));
1212                 goto exit;
1213         }
1214
1215         pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
1216         priv->original_hstcfg = temp;
1217         temp &= ~SMBHSTCFG_I2C_EN;      /* SMBus timing */
1218         if (!(temp & SMBHSTCFG_HST_EN)) {
1219                 dev_info(&dev->dev, "Enabling SMBus device\n");
1220                 temp |= SMBHSTCFG_HST_EN;
1221         }
1222         pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
1223
1224         if (temp & SMBHSTCFG_SMB_SMI_EN) {
1225                 dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
1226                 /* Disable SMBus interrupt feature if SMBus using SMI# */
1227                 priv->features &= ~FEATURE_IRQ;
1228         }
1229
1230         /* Clear special mode bits */
1231         if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
1232                 outb_p(inb_p(SMBAUXCTL(priv)) &
1233                        ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
1234
1235         /* Default timeout in interrupt mode: 200 ms */
1236         priv->adapter.timeout = HZ / 5;
1237
1238         if (priv->features & FEATURE_IRQ) {
1239                 u16 pcictl, pcists;
1240
1241                 /* Complain if an interrupt is already pending */
1242                 pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
1243                 if (pcists & SMBPCISTS_INTS)
1244                         dev_warn(&dev->dev, "An interrupt is pending!\n");
1245
1246                 /* Check if interrupts have been disabled */
1247                 pci_read_config_word(priv->pci_dev, SMBPCICTL, &pcictl);
1248                 if (pcictl & SMBPCICTL_INTDIS) {
1249                         dev_info(&dev->dev, "Interrupts are disabled\n");
1250                         priv->features &= ~FEATURE_IRQ;
1251                 }
1252         }
1253
1254         if (priv->features & FEATURE_IRQ) {
1255                 init_waitqueue_head(&priv->waitq);
1256
1257                 err = request_irq(dev->irq, i801_isr, IRQF_SHARED,
1258                                   i801_driver.name, priv);
1259                 if (err) {
1260                         dev_err(&dev->dev, "Failed to allocate irq %d: %d\n",
1261                                 dev->irq, err);
1262                         priv->features &= ~FEATURE_IRQ;
1263                 }
1264         }
1265         dev_info(&dev->dev, "SMBus using %s\n",
1266                  priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling");
1267
1268         /* set up the sysfs linkage to our parent device */
1269         priv->adapter.dev.parent = &dev->dev;
1270
1271         /* Retry up to 3 times on lost arbitration */
1272         priv->adapter.retries = 3;
1273
1274         snprintf(priv->adapter.name, sizeof(priv->adapter.name),
1275                 "SMBus I801 adapter at %04lx", priv->smba);
1276         err = i2c_add_adapter(&priv->adapter);
1277         if (err) {
1278                 dev_err(&dev->dev, "Failed to add SMBus adapter\n");
1279                 goto exit_free_irq;
1280         }
1281
1282         i801_probe_optional_slaves(priv);
1283         /* We ignore errors - multiplexing is optional */
1284         i801_add_mux(priv);
1285
1286         pci_set_drvdata(dev, priv);
1287
1288         return 0;
1289
1290 exit_free_irq:
1291         if (priv->features & FEATURE_IRQ)
1292                 free_irq(dev->irq, priv);
1293         pci_release_region(dev, SMBBAR);
1294 exit:
1295         kfree(priv);
1296         return err;
1297 }
1298
1299 static void i801_remove(struct pci_dev *dev)
1300 {
1301         struct i801_priv *priv = pci_get_drvdata(dev);
1302
1303         i801_del_mux(priv);
1304         i2c_del_adapter(&priv->adapter);
1305         pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
1306
1307         if (priv->features & FEATURE_IRQ)
1308                 free_irq(dev->irq, priv);
1309         pci_release_region(dev, SMBBAR);
1310
1311         kfree(priv);
1312         /*
1313          * do not call pci_disable_device(dev) since it can cause hard hangs on
1314          * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
1315          */
1316 }
1317
1318 #ifdef CONFIG_PM
1319 static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
1320 {
1321         struct i801_priv *priv = pci_get_drvdata(dev);
1322
1323         pci_save_state(dev);
1324         pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
1325         pci_set_power_state(dev, pci_choose_state(dev, mesg));
1326         return 0;
1327 }
1328
1329 static int i801_resume(struct pci_dev *dev)
1330 {
1331         pci_set_power_state(dev, PCI_D0);
1332         pci_restore_state(dev);
1333         return pci_enable_device(dev);
1334 }
1335 #else
1336 #define i801_suspend NULL
1337 #define i801_resume NULL
1338 #endif
1339
1340 static struct pci_driver i801_driver = {
1341         .name           = "i801_smbus",
1342         .id_table       = i801_ids,
1343         .probe          = i801_probe,
1344         .remove         = i801_remove,
1345         .suspend        = i801_suspend,
1346         .resume         = i801_resume,
1347 };
1348
1349 static int __init i2c_i801_init(void)
1350 {
1351         if (dmi_name_in_vendors("FUJITSU"))
1352                 input_apanel_init();
1353         return pci_register_driver(&i801_driver);
1354 }
1355
1356 static void __exit i2c_i801_exit(void)
1357 {
1358         pci_unregister_driver(&i801_driver);
1359 }
1360
1361 MODULE_AUTHOR("Mark D. Studebaker <[email protected]>, Jean Delvare <[email protected]>");
1362 MODULE_DESCRIPTION("I801 SMBus driver");
1363 MODULE_LICENSE("GPL");
1364
1365 module_init(i2c_i801_init);
1366 module_exit(i2c_i801_exit);