]> Git Repo - linux.git/blob - drivers/net/phy/bcm87xx.c
Merge tag 'mlx5-fixes-2019-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git...
[linux.git] / drivers / net / phy / bcm87xx.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2011 - 2012 Cavium, Inc.
4  */
5
6 #include <linux/module.h>
7 #include <linux/phy.h>
8 #include <linux/of.h>
9
10 #define PHY_ID_BCM8706  0x0143bdc1
11 #define PHY_ID_BCM8727  0x0143bff0
12
13 #define BCM87XX_PMD_RX_SIGNAL_DETECT    (MII_ADDR_C45 | 0x1000a)
14 #define BCM87XX_10GBASER_PCS_STATUS     (MII_ADDR_C45 | 0x30020)
15 #define BCM87XX_XGXS_LANE_STATUS        (MII_ADDR_C45 | 0x40018)
16
17 #define BCM87XX_LASI_CONTROL (MII_ADDR_C45 | 0x39002)
18 #define BCM87XX_LASI_STATUS (MII_ADDR_C45 | 0x39005)
19
20 #if IS_ENABLED(CONFIG_OF_MDIO)
21 /* Set and/or override some configuration registers based on the
22  * broadcom,c45-reg-init property stored in the of_node for the phydev.
23  *
24  * broadcom,c45-reg-init = <devid reg mask value>,...;
25  *
26  * There may be one or more sets of <devid reg mask value>:
27  *
28  * devid: which sub-device to use.
29  * reg: the register.
30  * mask: if non-zero, ANDed with existing register value.
31  * value: ORed with the masked value and written to the regiser.
32  *
33  */
34 static int bcm87xx_of_reg_init(struct phy_device *phydev)
35 {
36         const __be32 *paddr;
37         const __be32 *paddr_end;
38         int len, ret;
39
40         if (!phydev->mdio.dev.of_node)
41                 return 0;
42
43         paddr = of_get_property(phydev->mdio.dev.of_node,
44                                 "broadcom,c45-reg-init", &len);
45         if (!paddr)
46                 return 0;
47
48         paddr_end = paddr + (len /= sizeof(*paddr));
49
50         ret = 0;
51
52         while (paddr + 3 < paddr_end) {
53                 u16 devid       = be32_to_cpup(paddr++);
54                 u16 reg         = be32_to_cpup(paddr++);
55                 u16 mask        = be32_to_cpup(paddr++);
56                 u16 val_bits    = be32_to_cpup(paddr++);
57                 int val;
58                 u32 regnum = MII_ADDR_C45 | (devid << 16) | reg;
59                 val = 0;
60                 if (mask) {
61                         val = phy_read(phydev, regnum);
62                         if (val < 0) {
63                                 ret = val;
64                                 goto err;
65                         }
66                         val &= mask;
67                 }
68                 val |= val_bits;
69
70                 ret = phy_write(phydev, regnum, val);
71                 if (ret < 0)
72                         goto err;
73         }
74 err:
75         return ret;
76 }
77 #else
78 static int bcm87xx_of_reg_init(struct phy_device *phydev)
79 {
80         return 0;
81 }
82 #endif /* CONFIG_OF_MDIO */
83
84 static int bcm87xx_config_init(struct phy_device *phydev)
85 {
86         linkmode_zero(phydev->supported);
87         linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseR_FEC_BIT,
88                          phydev->supported);
89         linkmode_zero(phydev->advertising);
90         linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseR_FEC_BIT,
91                          phydev->advertising);
92         phydev->state = PHY_NOLINK;
93         phydev->autoneg = AUTONEG_DISABLE;
94
95         bcm87xx_of_reg_init(phydev);
96
97         return 0;
98 }
99
100 static int bcm87xx_config_aneg(struct phy_device *phydev)
101 {
102         return -EINVAL;
103 }
104
105 static int bcm87xx_read_status(struct phy_device *phydev)
106 {
107         int rx_signal_detect;
108         int pcs_status;
109         int xgxs_lane_status;
110
111         rx_signal_detect = phy_read(phydev, BCM87XX_PMD_RX_SIGNAL_DETECT);
112         if (rx_signal_detect < 0)
113                 return rx_signal_detect;
114
115         if ((rx_signal_detect & 1) == 0)
116                 goto no_link;
117
118         pcs_status = phy_read(phydev, BCM87XX_10GBASER_PCS_STATUS);
119         if (pcs_status < 0)
120                 return pcs_status;
121
122         if ((pcs_status & 1) == 0)
123                 goto no_link;
124
125         xgxs_lane_status = phy_read(phydev, BCM87XX_XGXS_LANE_STATUS);
126         if (xgxs_lane_status < 0)
127                 return xgxs_lane_status;
128
129         if ((xgxs_lane_status & 0x1000) == 0)
130                 goto no_link;
131
132         phydev->speed = 10000;
133         phydev->link = 1;
134         phydev->duplex = 1;
135         return 0;
136
137 no_link:
138         phydev->link = 0;
139         return 0;
140 }
141
142 static int bcm87xx_config_intr(struct phy_device *phydev)
143 {
144         int reg, err;
145
146         reg = phy_read(phydev, BCM87XX_LASI_CONTROL);
147
148         if (reg < 0)
149                 return reg;
150
151         if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
152                 reg |= 1;
153         else
154                 reg &= ~1;
155
156         err = phy_write(phydev, BCM87XX_LASI_CONTROL, reg);
157         return err;
158 }
159
160 static int bcm87xx_did_interrupt(struct phy_device *phydev)
161 {
162         int reg;
163
164         reg = phy_read(phydev, BCM87XX_LASI_STATUS);
165
166         if (reg < 0) {
167                 phydev_err(phydev,
168                            "Error: Read of BCM87XX_LASI_STATUS failed: %d\n",
169                            reg);
170                 return 0;
171         }
172         return (reg & 1) != 0;
173 }
174
175 static int bcm87xx_ack_interrupt(struct phy_device *phydev)
176 {
177         /* Reading the LASI status clears it. */
178         bcm87xx_did_interrupt(phydev);
179         return 0;
180 }
181
182 static int bcm8706_match_phy_device(struct phy_device *phydev)
183 {
184         return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8706;
185 }
186
187 static int bcm8727_match_phy_device(struct phy_device *phydev)
188 {
189         return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8727;
190 }
191
192 static struct phy_driver bcm87xx_driver[] = {
193 {
194         .phy_id         = PHY_ID_BCM8706,
195         .phy_id_mask    = 0xffffffff,
196         .name           = "Broadcom BCM8706",
197         .features       = PHY_10GBIT_FEC_FEATURES,
198         .config_init    = bcm87xx_config_init,
199         .config_aneg    = bcm87xx_config_aneg,
200         .read_status    = bcm87xx_read_status,
201         .ack_interrupt  = bcm87xx_ack_interrupt,
202         .config_intr    = bcm87xx_config_intr,
203         .did_interrupt  = bcm87xx_did_interrupt,
204         .match_phy_device = bcm8706_match_phy_device,
205 }, {
206         .phy_id         = PHY_ID_BCM8727,
207         .phy_id_mask    = 0xffffffff,
208         .name           = "Broadcom BCM8727",
209         .features       = PHY_10GBIT_FEC_FEATURES,
210         .config_init    = bcm87xx_config_init,
211         .config_aneg    = bcm87xx_config_aneg,
212         .read_status    = bcm87xx_read_status,
213         .ack_interrupt  = bcm87xx_ack_interrupt,
214         .config_intr    = bcm87xx_config_intr,
215         .did_interrupt  = bcm87xx_did_interrupt,
216         .match_phy_device = bcm8727_match_phy_device,
217 } };
218
219 module_phy_driver(bcm87xx_driver);
220
221 MODULE_LICENSE("GPL v2");
This page took 0.044331 seconds and 4 git commands to generate.