]> Git Repo - linux.git/blob - arch/mips/Kconfig
Merge tag 'mlx5-fixes-2019-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git...
[linux.git] / arch / mips / Kconfig
1 # SPDX-License-Identifier: GPL-2.0
2 config MIPS
3         bool
4         default y
5         select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT
6         select ARCH_CLOCKSOURCE_DATA
7         select ARCH_DISCARD_MEMBLOCK
8         select ARCH_HAS_ELF_RANDOMIZE
9         select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
10         select ARCH_HAS_UBSAN_SANITIZE_ALL
11         select ARCH_SUPPORTS_UPROBES
12         select ARCH_USE_BUILTIN_BSWAP
13         select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
14         select ARCH_USE_QUEUED_RWLOCKS
15         select ARCH_USE_QUEUED_SPINLOCKS
16         select ARCH_WANT_IPC_PARSE_VERSION
17         select BUILDTIME_EXTABLE_SORT
18         select CLONE_BACKWARDS
19         select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
20         select CPU_PM if CPU_IDLE
21         select GENERIC_ATOMIC64 if !64BIT
22         select GENERIC_CLOCKEVENTS
23         select GENERIC_CMOS_UPDATE
24         select GENERIC_CPU_AUTOPROBE
25         select GENERIC_IOMAP
26         select GENERIC_IRQ_PROBE
27         select GENERIC_IRQ_SHOW
28         select GENERIC_ISA_DMA if EISA
29         select GENERIC_LIB_ASHLDI3
30         select GENERIC_LIB_ASHRDI3
31         select GENERIC_LIB_CMPDI2
32         select GENERIC_LIB_LSHRDI3
33         select GENERIC_LIB_UCMPDI2
34         select GENERIC_SCHED_CLOCK if !CAVIUM_OCTEON_SOC
35         select GENERIC_SMP_IDLE_THREAD
36         select GENERIC_TIME_VSYSCALL
37         select HANDLE_DOMAIN_IRQ
38         select HAVE_ARCH_COMPILER_H
39         select HAVE_ARCH_JUMP_LABEL
40         select HAVE_ARCH_KGDB
41         select HAVE_ARCH_MMAP_RND_BITS if MMU
42         select HAVE_ARCH_MMAP_RND_COMPAT_BITS if MMU && COMPAT
43         select HAVE_ARCH_SECCOMP_FILTER
44         select HAVE_ARCH_TRACEHOOK
45         select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
46         select HAVE_CBPF_JIT if (!64BIT && !CPU_MICROMIPS)
47         select HAVE_EBPF_JIT if (64BIT && !CPU_MICROMIPS)
48         select HAVE_CONTEXT_TRACKING
49         select HAVE_COPY_THREAD_TLS
50         select HAVE_C_RECORDMCOUNT
51         select HAVE_DEBUG_KMEMLEAK
52         select HAVE_DEBUG_STACKOVERFLOW
53         select HAVE_DMA_CONTIGUOUS
54         select HAVE_DYNAMIC_FTRACE
55         select HAVE_EXIT_THREAD
56         select HAVE_FTRACE_MCOUNT_RECORD
57         select HAVE_FUNCTION_GRAPH_TRACER
58         select HAVE_FUNCTION_TRACER
59         select HAVE_GENERIC_DMA_COHERENT
60         select HAVE_IDE
61         select HAVE_IOREMAP_PROT
62         select HAVE_IRQ_EXIT_ON_IRQ_STACK
63         select HAVE_IRQ_TIME_ACCOUNTING
64         select HAVE_KPROBES
65         select HAVE_KRETPROBES
66         select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
67         select HAVE_MEMBLOCK_NODE_MAP
68         select HAVE_MOD_ARCH_SPECIFIC
69         select HAVE_NMI
70         select HAVE_OPROFILE
71         select HAVE_PERF_EVENTS
72         select HAVE_REGS_AND_STACK_ACCESS_API
73         select HAVE_RSEQ
74         select HAVE_STACKPROTECTOR
75         select HAVE_SYSCALL_TRACEPOINTS
76         select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP
77         select IRQ_FORCED_THREADING
78         select ISA if EISA
79         select MODULES_USE_ELF_RELA if MODULES && 64BIT
80         select MODULES_USE_ELF_REL if MODULES
81         select PERF_USE_VMALLOC
82         select RTC_LIB
83         select SYSCTL_EXCEPTION_TRACE
84         select VIRT_TO_BUS
85
86 menu "Machine selection"
87
88 choice
89         prompt "System type"
90         default MIPS_GENERIC
91
92 config MIPS_GENERIC
93         bool "Generic board-agnostic MIPS kernel"
94         select BOOT_RAW
95         select BUILTIN_DTB
96         select CEVT_R4K
97         select CLKSRC_MIPS_GIC
98         select COMMON_CLK
99         select CPU_MIPSR2_IRQ_VI
100         select CPU_MIPSR2_IRQ_EI
101         select CSRC_R4K
102         select DMA_PERDEV_COHERENT
103         select HAVE_PCI
104         select IRQ_MIPS_CPU
105         select LIBFDT
106         select MIPS_AUTO_PFN_OFFSET
107         select MIPS_CPU_SCACHE
108         select MIPS_GIC
109         select MIPS_L1_CACHE_SHIFT_7
110         select NO_EXCEPT_FILL
111         select PCI_DRIVERS_GENERIC
112         select PINCTRL
113         select SMP_UP if SMP
114         select SWAP_IO_SPACE
115         select SYS_HAS_CPU_MIPS32_R1
116         select SYS_HAS_CPU_MIPS32_R2
117         select SYS_HAS_CPU_MIPS32_R6
118         select SYS_HAS_CPU_MIPS64_R1
119         select SYS_HAS_CPU_MIPS64_R2
120         select SYS_HAS_CPU_MIPS64_R6
121         select SYS_SUPPORTS_32BIT_KERNEL
122         select SYS_SUPPORTS_64BIT_KERNEL
123         select SYS_SUPPORTS_BIG_ENDIAN
124         select SYS_SUPPORTS_HIGHMEM
125         select SYS_SUPPORTS_LITTLE_ENDIAN
126         select SYS_SUPPORTS_MICROMIPS
127         select SYS_SUPPORTS_MIPS_CPS
128         select SYS_SUPPORTS_MIPS16
129         select SYS_SUPPORTS_MULTITHREADING
130         select SYS_SUPPORTS_RELOCATABLE
131         select SYS_SUPPORTS_SMARTMIPS
132         select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
133         select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
134         select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
135         select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
136         select USB_UHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
137         select USB_UHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
138         select USE_OF
139         select UHI_BOOT
140         help
141           Select this to build a kernel which aims to support multiple boards,
142           generally using a flattened device tree passed from the bootloader
143           using the boot protocol defined in the UHI (Unified Hosting
144           Interface) specification.
145
146 config MIPS_ALCHEMY
147         bool "Alchemy processor based machines"
148         select PHYS_ADDR_T_64BIT
149         select CEVT_R4K
150         select CSRC_R4K
151         select IRQ_MIPS_CPU
152         select DMA_MAYBE_COHERENT       # Au1000,1500,1100 aren't, rest is
153         select SYS_HAS_CPU_MIPS32_R1
154         select SYS_SUPPORTS_32BIT_KERNEL
155         select SYS_SUPPORTS_APM_EMULATION
156         select GPIOLIB
157         select SYS_SUPPORTS_ZBOOT
158         select COMMON_CLK
159
160 config AR7
161         bool "Texas Instruments AR7"
162         select BOOT_ELF32
163         select DMA_NONCOHERENT
164         select CEVT_R4K
165         select CSRC_R4K
166         select IRQ_MIPS_CPU
167         select NO_EXCEPT_FILL
168         select SWAP_IO_SPACE
169         select SYS_HAS_CPU_MIPS32_R1
170         select SYS_HAS_EARLY_PRINTK
171         select SYS_SUPPORTS_32BIT_KERNEL
172         select SYS_SUPPORTS_LITTLE_ENDIAN
173         select SYS_SUPPORTS_MIPS16
174         select SYS_SUPPORTS_ZBOOT_UART16550
175         select GPIOLIB
176         select VLYNQ
177         select HAVE_CLK
178         help
179           Support for the Texas Instruments AR7 System-on-a-Chip
180           family: TNETD7100, 7200 and 7300.
181
182 config ATH25
183         bool "Atheros AR231x/AR531x SoC support"
184         select CEVT_R4K
185         select CSRC_R4K
186         select DMA_NONCOHERENT
187         select IRQ_MIPS_CPU
188         select IRQ_DOMAIN
189         select SYS_HAS_CPU_MIPS32_R1
190         select SYS_SUPPORTS_BIG_ENDIAN
191         select SYS_SUPPORTS_32BIT_KERNEL
192         select SYS_HAS_EARLY_PRINTK
193         help
194           Support for Atheros AR231x and Atheros AR531x based boards
195
196 config ATH79
197         bool "Atheros AR71XX/AR724X/AR913X based boards"
198         select ARCH_HAS_RESET_CONTROLLER
199         select BOOT_RAW
200         select CEVT_R4K
201         select CSRC_R4K
202         select DMA_NONCOHERENT
203         select GPIOLIB
204         select PINCTRL
205         select HAVE_CLK
206         select COMMON_CLK
207         select CLKDEV_LOOKUP
208         select IRQ_MIPS_CPU
209         select SYS_HAS_CPU_MIPS32_R2
210         select SYS_HAS_EARLY_PRINTK
211         select SYS_SUPPORTS_32BIT_KERNEL
212         select SYS_SUPPORTS_BIG_ENDIAN
213         select SYS_SUPPORTS_MIPS16
214         select SYS_SUPPORTS_ZBOOT_UART_PROM
215         select USE_OF
216         select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
217         help
218           Support for the Atheros AR71XX/AR724X/AR913X SoCs.
219
220 config BMIPS_GENERIC
221         bool "Broadcom Generic BMIPS kernel"
222         select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
223         select ARCH_HAS_PHYS_TO_DMA
224         select BOOT_RAW
225         select NO_EXCEPT_FILL
226         select USE_OF
227         select CEVT_R4K
228         select CSRC_R4K
229         select SYNC_R4K
230         select COMMON_CLK
231         select BCM6345_L1_IRQ
232         select BCM7038_L1_IRQ
233         select BCM7120_L2_IRQ
234         select BRCMSTB_L2_IRQ
235         select IRQ_MIPS_CPU
236         select DMA_NONCOHERENT
237         select SYS_SUPPORTS_32BIT_KERNEL
238         select SYS_SUPPORTS_LITTLE_ENDIAN
239         select SYS_SUPPORTS_BIG_ENDIAN
240         select SYS_SUPPORTS_HIGHMEM
241         select SYS_HAS_CPU_BMIPS32_3300
242         select SYS_HAS_CPU_BMIPS4350
243         select SYS_HAS_CPU_BMIPS4380
244         select SYS_HAS_CPU_BMIPS5000
245         select SWAP_IO_SPACE
246         select USB_EHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
247         select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
248         select USB_OHCI_BIG_ENDIAN_DESC if CPU_BIG_ENDIAN
249         select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
250         select HARDIRQS_SW_RESEND
251         help
252           Build a generic DT-based kernel image that boots on select
253           BCM33xx cable modem chips, BCM63xx DSL chips, and BCM7xxx set-top
254           box chips.  Note that CONFIG_CPU_BIG_ENDIAN/CONFIG_CPU_LITTLE_ENDIAN
255           must be set appropriately for your board.
256
257 config BCM47XX
258         bool "Broadcom BCM47XX based boards"
259         select BOOT_RAW
260         select CEVT_R4K
261         select CSRC_R4K
262         select DMA_NONCOHERENT
263         select HAVE_PCI
264         select IRQ_MIPS_CPU
265         select SYS_HAS_CPU_MIPS32_R1
266         select NO_EXCEPT_FILL
267         select SYS_SUPPORTS_32BIT_KERNEL
268         select SYS_SUPPORTS_LITTLE_ENDIAN
269         select SYS_SUPPORTS_MIPS16
270         select SYS_SUPPORTS_ZBOOT
271         select SYS_HAS_EARLY_PRINTK
272         select USE_GENERIC_EARLY_PRINTK_8250
273         select GPIOLIB
274         select LEDS_GPIO_REGISTER
275         select BCM47XX_NVRAM
276         select BCM47XX_SPROM
277         select BCM47XX_SSB if !BCM47XX_BCMA
278         help
279          Support for BCM47XX based boards
280
281 config BCM63XX
282         bool "Broadcom BCM63XX based boards"
283         select BOOT_RAW
284         select CEVT_R4K
285         select CSRC_R4K
286         select SYNC_R4K
287         select DMA_NONCOHERENT
288         select IRQ_MIPS_CPU
289         select SYS_SUPPORTS_32BIT_KERNEL
290         select SYS_SUPPORTS_BIG_ENDIAN
291         select SYS_HAS_EARLY_PRINTK
292         select SWAP_IO_SPACE
293         select GPIOLIB
294         select HAVE_CLK
295         select MIPS_L1_CACHE_SHIFT_4
296         select CLKDEV_LOOKUP
297         help
298          Support for BCM63XX based boards
299
300 config MIPS_COBALT
301         bool "Cobalt Server"
302         select CEVT_R4K
303         select CSRC_R4K
304         select CEVT_GT641XX
305         select DMA_NONCOHERENT
306         select FORCE_PCI
307         select I8253
308         select I8259
309         select IRQ_MIPS_CPU
310         select IRQ_GT641XX
311         select PCI_GT64XXX_PCI0
312         select SYS_HAS_CPU_NEVADA
313         select SYS_HAS_EARLY_PRINTK
314         select SYS_SUPPORTS_32BIT_KERNEL
315         select SYS_SUPPORTS_64BIT_KERNEL
316         select SYS_SUPPORTS_LITTLE_ENDIAN
317         select USE_GENERIC_EARLY_PRINTK_8250
318
319 config MACH_DECSTATION
320         bool "DECstations"
321         select BOOT_ELF32
322         select CEVT_DS1287
323         select CEVT_R4K if CPU_R4X00
324         select CSRC_IOASIC
325         select CSRC_R4K if CPU_R4X00
326         select CPU_DADDI_WORKAROUNDS if 64BIT
327         select CPU_R4000_WORKAROUNDS if 64BIT
328         select CPU_R4400_WORKAROUNDS if 64BIT
329         select DMA_NONCOHERENT
330         select NO_IOPORT_MAP
331         select IRQ_MIPS_CPU
332         select SYS_HAS_CPU_R3000
333         select SYS_HAS_CPU_R4X00
334         select SYS_SUPPORTS_32BIT_KERNEL
335         select SYS_SUPPORTS_64BIT_KERNEL
336         select SYS_SUPPORTS_LITTLE_ENDIAN
337         select SYS_SUPPORTS_128HZ
338         select SYS_SUPPORTS_256HZ
339         select SYS_SUPPORTS_1024HZ
340         select MIPS_L1_CACHE_SHIFT_4
341         help
342           This enables support for DEC's MIPS based workstations.  For details
343           see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
344           DECstation porting pages on <http://decstation.unix-ag.org/>.
345
346           If you have one of the following DECstation Models you definitely
347           want to choose R4xx0 for the CPU Type:
348
349                 DECstation 5000/50
350                 DECstation 5000/150
351                 DECstation 5000/260
352                 DECsystem 5900/260
353
354           otherwise choose R3000.
355
356 config MACH_JAZZ
357         bool "Jazz family of machines"
358         select ARCH_MIGHT_HAVE_PC_PARPORT
359         select ARCH_MIGHT_HAVE_PC_SERIO
360         select FW_ARC
361         select FW_ARC32
362         select ARCH_MAY_HAVE_PC_FDC
363         select CEVT_R4K
364         select CSRC_R4K
365         select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
366         select GENERIC_ISA_DMA
367         select HAVE_PCSPKR_PLATFORM
368         select IRQ_MIPS_CPU
369         select I8253
370         select I8259
371         select ISA
372         select SYS_HAS_CPU_R4X00
373         select SYS_SUPPORTS_32BIT_KERNEL
374         select SYS_SUPPORTS_64BIT_KERNEL
375         select SYS_SUPPORTS_100HZ
376         help
377          This a family of machines based on the MIPS R4030 chipset which was
378          used by several vendors to build RISC/os and Windows NT workstations.
379          Members include the Acer PICA, MIPS Magnum 4000, MIPS Millennium and
380          Olivetti M700-10 workstations.
381
382 config MACH_INGENIC
383         bool "Ingenic SoC based machines"
384         select SYS_SUPPORTS_32BIT_KERNEL
385         select SYS_SUPPORTS_LITTLE_ENDIAN
386         select SYS_SUPPORTS_ZBOOT_UART16550
387         select DMA_NONCOHERENT
388         select IRQ_MIPS_CPU
389         select PINCTRL
390         select GPIOLIB
391         select COMMON_CLK
392         select GENERIC_IRQ_CHIP
393         select BUILTIN_DTB if MIPS_NO_APPENDED_DTB
394         select USE_OF
395         select LIBFDT
396
397 config LANTIQ
398         bool "Lantiq based platforms"
399         select DMA_NONCOHERENT
400         select IRQ_MIPS_CPU
401         select CEVT_R4K
402         select CSRC_R4K
403         select SYS_HAS_CPU_MIPS32_R1
404         select SYS_HAS_CPU_MIPS32_R2
405         select SYS_SUPPORTS_BIG_ENDIAN
406         select SYS_SUPPORTS_32BIT_KERNEL
407         select SYS_SUPPORTS_MIPS16
408         select SYS_SUPPORTS_MULTITHREADING
409         select SYS_SUPPORTS_VPE_LOADER
410         select SYS_HAS_EARLY_PRINTK
411         select GPIOLIB
412         select SWAP_IO_SPACE
413         select BOOT_RAW
414         select CLKDEV_LOOKUP
415         select USE_OF
416         select PINCTRL
417         select PINCTRL_LANTIQ
418         select ARCH_HAS_RESET_CONTROLLER
419         select RESET_CONTROLLER
420
421 config LASAT
422         bool "LASAT Networks platforms"
423         select CEVT_R4K
424         select CRC32
425         select CSRC_R4K
426         select DMA_NONCOHERENT
427         select SYS_HAS_EARLY_PRINTK
428         select HAVE_PCI
429         select IRQ_MIPS_CPU
430         select PCI_GT64XXX_PCI0
431         select MIPS_NILE4
432         select R5000_CPU_SCACHE
433         select SYS_HAS_CPU_R5000
434         select SYS_SUPPORTS_32BIT_KERNEL
435         select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
436         select SYS_SUPPORTS_LITTLE_ENDIAN
437
438 config MACH_LOONGSON32
439         bool "Loongson-1 family of machines"
440         select SYS_SUPPORTS_ZBOOT
441         help
442           This enables support for the Loongson-1 family of machines.
443
444           Loongson-1 is a family of 32-bit MIPS-compatible SoCs developed by
445           the Institute of Computing Technology (ICT), Chinese Academy of
446           Sciences (CAS).
447
448 config MACH_LOONGSON64
449         bool "Loongson-2/3 family of machines"
450         select SYS_SUPPORTS_ZBOOT
451         help
452           This enables the support of Loongson-2/3 family of machines.
453
454           Loongson-2 is a family of single-core CPUs and Loongson-3 is a
455           family of multi-core CPUs. They are both 64-bit general-purpose
456           MIPS-compatible CPUs. Loongson-2/3 are developed by the Institute
457           of Computing Technology (ICT), Chinese Academy of Sciences (CAS)
458           in the People's Republic of China. The chief architect is Professor
459           Weiwu Hu.
460
461 config MACH_PISTACHIO
462         bool "IMG Pistachio SoC based boards"
463         select BOOT_ELF32
464         select BOOT_RAW
465         select CEVT_R4K
466         select CLKSRC_MIPS_GIC
467         select COMMON_CLK
468         select CSRC_R4K
469         select DMA_NONCOHERENT
470         select GPIOLIB
471         select IRQ_MIPS_CPU
472         select LIBFDT
473         select MFD_SYSCON
474         select MIPS_CPU_SCACHE
475         select MIPS_GIC
476         select PINCTRL
477         select REGULATOR
478         select SYS_HAS_CPU_MIPS32_R2
479         select SYS_SUPPORTS_32BIT_KERNEL
480         select SYS_SUPPORTS_LITTLE_ENDIAN
481         select SYS_SUPPORTS_MIPS_CPS
482         select SYS_SUPPORTS_MULTITHREADING
483         select SYS_SUPPORTS_RELOCATABLE
484         select SYS_SUPPORTS_ZBOOT
485         select SYS_HAS_EARLY_PRINTK
486         select USE_GENERIC_EARLY_PRINTK_8250
487         select USE_OF
488         help
489           This enables support for the IMG Pistachio SoC platform.
490
491 config MIPS_MALTA
492         bool "MIPS Malta board"
493         select ARCH_MAY_HAVE_PC_FDC
494         select ARCH_MIGHT_HAVE_PC_PARPORT
495         select ARCH_MIGHT_HAVE_PC_SERIO
496         select BOOT_ELF32
497         select BOOT_RAW
498         select BUILTIN_DTB
499         select CEVT_R4K
500         select CLKSRC_MIPS_GIC
501         select COMMON_CLK
502         select CSRC_R4K
503         select DMA_MAYBE_COHERENT
504         select GENERIC_ISA_DMA
505         select HAVE_PCSPKR_PLATFORM
506         select HAVE_PCI
507         select I8253
508         select I8259
509         select IRQ_MIPS_CPU
510         select LIBFDT
511         select MIPS_BONITO64
512         select MIPS_CPU_SCACHE
513         select MIPS_GIC
514         select MIPS_L1_CACHE_SHIFT_6
515         select MIPS_MSC
516         select PCI_GT64XXX_PCI0
517         select SMP_UP if SMP
518         select SWAP_IO_SPACE
519         select SYS_HAS_CPU_MIPS32_R1
520         select SYS_HAS_CPU_MIPS32_R2
521         select SYS_HAS_CPU_MIPS32_R3_5
522         select SYS_HAS_CPU_MIPS32_R5
523         select SYS_HAS_CPU_MIPS32_R6
524         select SYS_HAS_CPU_MIPS64_R1
525         select SYS_HAS_CPU_MIPS64_R2
526         select SYS_HAS_CPU_MIPS64_R6
527         select SYS_HAS_CPU_NEVADA
528         select SYS_HAS_CPU_RM7000
529         select SYS_SUPPORTS_32BIT_KERNEL
530         select SYS_SUPPORTS_64BIT_KERNEL
531         select SYS_SUPPORTS_BIG_ENDIAN
532         select SYS_SUPPORTS_HIGHMEM
533         select SYS_SUPPORTS_LITTLE_ENDIAN
534         select SYS_SUPPORTS_MICROMIPS
535         select SYS_SUPPORTS_MIPS16
536         select SYS_SUPPORTS_MIPS_CMP
537         select SYS_SUPPORTS_MIPS_CPS
538         select SYS_SUPPORTS_MULTITHREADING
539         select SYS_SUPPORTS_RELOCATABLE
540         select SYS_SUPPORTS_SMARTMIPS
541         select SYS_SUPPORTS_VPE_LOADER
542         select SYS_SUPPORTS_ZBOOT
543         select USE_OF
544         select ZONE_DMA32 if 64BIT
545         help
546           This enables support for the MIPS Technologies Malta evaluation
547           board.
548
549 config MACH_PIC32
550         bool "Microchip PIC32 Family"
551         help
552           This enables support for the Microchip PIC32 family of platforms.
553
554           Microchip PIC32 is a family of general-purpose 32 bit MIPS core
555           microcontrollers.
556
557 config NEC_MARKEINS
558         bool "NEC EMMA2RH Mark-eins board"
559         select SOC_EMMA2RH
560         select HAVE_PCI
561         help
562           This enables support for the NEC Electronics Mark-eins boards.
563
564 config MACH_VR41XX
565         bool "NEC VR4100 series based machines"
566         select CEVT_R4K
567         select CSRC_R4K
568         select SYS_HAS_CPU_VR41XX
569         select SYS_SUPPORTS_MIPS16
570         select GPIOLIB
571
572 config NXP_STB220
573         bool "NXP STB220 board"
574         select SOC_PNX833X
575         help
576          Support for NXP Semiconductors STB220 Development Board.
577
578 config NXP_STB225
579         bool "NXP 225 board"
580         select SOC_PNX833X
581         select SOC_PNX8335
582         help
583          Support for NXP Semiconductors STB225 Development Board.
584
585 config PMC_MSP
586         bool "PMC-Sierra MSP chipsets"
587         select CEVT_R4K
588         select CSRC_R4K
589         select DMA_NONCOHERENT
590         select SWAP_IO_SPACE
591         select NO_EXCEPT_FILL
592         select BOOT_RAW
593         select SYS_HAS_CPU_MIPS32_R1
594         select SYS_HAS_CPU_MIPS32_R2
595         select SYS_SUPPORTS_32BIT_KERNEL
596         select SYS_SUPPORTS_BIG_ENDIAN
597         select SYS_SUPPORTS_MIPS16
598         select IRQ_MIPS_CPU
599         select SERIAL_8250
600         select SERIAL_8250_CONSOLE
601         select USB_EHCI_BIG_ENDIAN_MMIO
602         select USB_EHCI_BIG_ENDIAN_DESC
603         help
604           This adds support for the PMC-Sierra family of Multi-Service
605           Processor System-On-A-Chips.  These parts include a number
606           of integrated peripherals, interfaces and DSPs in addition to
607           a variety of MIPS cores.
608
609 config RALINK
610         bool "Ralink based machines"
611         select CEVT_R4K
612         select CSRC_R4K
613         select BOOT_RAW
614         select DMA_NONCOHERENT
615         select IRQ_MIPS_CPU
616         select USE_OF
617         select SYS_HAS_CPU_MIPS32_R1
618         select SYS_HAS_CPU_MIPS32_R2
619         select SYS_SUPPORTS_32BIT_KERNEL
620         select SYS_SUPPORTS_LITTLE_ENDIAN
621         select SYS_SUPPORTS_MIPS16
622         select SYS_HAS_EARLY_PRINTK
623         select CLKDEV_LOOKUP
624         select ARCH_HAS_RESET_CONTROLLER
625         select RESET_CONTROLLER
626
627 config SGI_IP22
628         bool "SGI IP22 (Indy/Indigo2)"
629         select FW_ARC
630         select FW_ARC32
631         select ARCH_MIGHT_HAVE_PC_SERIO
632         select BOOT_ELF32
633         select CEVT_R4K
634         select CSRC_R4K
635         select DEFAULT_SGI_PARTITION
636         select DMA_NONCOHERENT
637         select HAVE_EISA
638         select I8253
639         select I8259
640         select IP22_CPU_SCACHE
641         select IRQ_MIPS_CPU
642         select GENERIC_ISA_DMA_SUPPORT_BROKEN
643         select SGI_HAS_I8042
644         select SGI_HAS_INDYDOG
645         select SGI_HAS_HAL2
646         select SGI_HAS_SEEQ
647         select SGI_HAS_WD93
648         select SGI_HAS_ZILOG
649         select SWAP_IO_SPACE
650         select SYS_HAS_CPU_R4X00
651         select SYS_HAS_CPU_R5000
652         #
653         # Disable EARLY_PRINTK for now since it leads to overwritten prom
654         # memory during early boot on some machines.
655         #
656         # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com
657         # for a more details discussion
658         #
659         # select SYS_HAS_EARLY_PRINTK
660         select SYS_SUPPORTS_32BIT_KERNEL
661         select SYS_SUPPORTS_64BIT_KERNEL
662         select SYS_SUPPORTS_BIG_ENDIAN
663         select MIPS_L1_CACHE_SHIFT_7
664         help
665           This are the SGI Indy, Challenge S and Indigo2, as well as certain
666           OEM variants like the Tandem CMN B006S. To compile a Linux kernel
667           that runs on these, say Y here.
668
669 config SGI_IP27
670         bool "SGI IP27 (Origin200/2000)"
671         select ARCH_HAS_PHYS_TO_DMA
672         select FW_ARC
673         select FW_ARC64
674         select BOOT_ELF64
675         select DEFAULT_SGI_PARTITION
676         select SYS_HAS_EARLY_PRINTK
677         select HAVE_PCI
678         select IRQ_MIPS_CPU
679         select NR_CPUS_DEFAULT_64
680         select SYS_HAS_CPU_R10000
681         select SYS_SUPPORTS_64BIT_KERNEL
682         select SYS_SUPPORTS_BIG_ENDIAN
683         select SYS_SUPPORTS_NUMA
684         select SYS_SUPPORTS_SMP
685         select MIPS_L1_CACHE_SHIFT_7
686         help
687           This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
688           workstations.  To compile a Linux kernel that runs on these, say Y
689           here.
690
691 config SGI_IP28
692         bool "SGI IP28 (Indigo2 R10k)"
693         select FW_ARC
694         select FW_ARC64
695         select ARCH_MIGHT_HAVE_PC_SERIO
696         select BOOT_ELF64
697         select CEVT_R4K
698         select CSRC_R4K
699         select DEFAULT_SGI_PARTITION
700         select DMA_NONCOHERENT
701         select GENERIC_ISA_DMA_SUPPORT_BROKEN
702         select IRQ_MIPS_CPU
703         select HAVE_EISA
704         select I8253
705         select I8259
706         select SGI_HAS_I8042
707         select SGI_HAS_INDYDOG
708         select SGI_HAS_HAL2
709         select SGI_HAS_SEEQ
710         select SGI_HAS_WD93
711         select SGI_HAS_ZILOG
712         select SWAP_IO_SPACE
713         select SYS_HAS_CPU_R10000
714         #
715         # Disable EARLY_PRINTK for now since it leads to overwritten prom
716         # memory during early boot on some machines.
717         #
718         # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com
719         # for a more details discussion
720         #
721         # select SYS_HAS_EARLY_PRINTK
722         select SYS_SUPPORTS_64BIT_KERNEL
723         select SYS_SUPPORTS_BIG_ENDIAN
724         select MIPS_L1_CACHE_SHIFT_7
725       help
726         This is the SGI Indigo2 with R10000 processor.  To compile a Linux
727         kernel that runs on these, say Y here.
728
729 config SGI_IP32
730         bool "SGI IP32 (O2)"
731         select ARCH_HAS_PHYS_TO_DMA
732         select FW_ARC
733         select FW_ARC32
734         select BOOT_ELF32
735         select CEVT_R4K
736         select CSRC_R4K
737         select DMA_NONCOHERENT
738         select HAVE_PCI
739         select IRQ_MIPS_CPU
740         select R5000_CPU_SCACHE
741         select RM7000_CPU_SCACHE
742         select SYS_HAS_CPU_R5000
743         select SYS_HAS_CPU_R10000 if BROKEN
744         select SYS_HAS_CPU_RM7000
745         select SYS_HAS_CPU_NEVADA
746         select SYS_SUPPORTS_64BIT_KERNEL
747         select SYS_SUPPORTS_BIG_ENDIAN
748         help
749           If you want this kernel to run on SGI O2 workstation, say Y here.
750
751 config SIBYTE_CRHINE
752         bool "Sibyte BCM91120C-CRhine"
753         select BOOT_ELF32
754         select SIBYTE_BCM1120
755         select SWAP_IO_SPACE
756         select SYS_HAS_CPU_SB1
757         select SYS_SUPPORTS_BIG_ENDIAN
758         select SYS_SUPPORTS_LITTLE_ENDIAN
759
760 config SIBYTE_CARMEL
761         bool "Sibyte BCM91120x-Carmel"
762         select BOOT_ELF32
763         select SIBYTE_BCM1120
764         select SWAP_IO_SPACE
765         select SYS_HAS_CPU_SB1
766         select SYS_SUPPORTS_BIG_ENDIAN
767         select SYS_SUPPORTS_LITTLE_ENDIAN
768
769 config SIBYTE_CRHONE
770         bool "Sibyte BCM91125C-CRhone"
771         select BOOT_ELF32
772         select SIBYTE_BCM1125
773         select SWAP_IO_SPACE
774         select SYS_HAS_CPU_SB1
775         select SYS_SUPPORTS_BIG_ENDIAN
776         select SYS_SUPPORTS_HIGHMEM
777         select SYS_SUPPORTS_LITTLE_ENDIAN
778
779 config SIBYTE_RHONE
780         bool "Sibyte BCM91125E-Rhone"
781         select BOOT_ELF32
782         select SIBYTE_BCM1125H
783         select SWAP_IO_SPACE
784         select SYS_HAS_CPU_SB1
785         select SYS_SUPPORTS_BIG_ENDIAN
786         select SYS_SUPPORTS_LITTLE_ENDIAN
787
788 config SIBYTE_SWARM
789         bool "Sibyte BCM91250A-SWARM"
790         select BOOT_ELF32
791         select HAVE_PATA_PLATFORM
792         select SIBYTE_SB1250
793         select SWAP_IO_SPACE
794         select SYS_HAS_CPU_SB1
795         select SYS_SUPPORTS_BIG_ENDIAN
796         select SYS_SUPPORTS_HIGHMEM
797         select SYS_SUPPORTS_LITTLE_ENDIAN
798         select ZONE_DMA32 if 64BIT
799         select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
800
801 config SIBYTE_LITTLESUR
802         bool "Sibyte BCM91250C2-LittleSur"
803         select BOOT_ELF32
804         select HAVE_PATA_PLATFORM
805         select SIBYTE_SB1250
806         select SWAP_IO_SPACE
807         select SYS_HAS_CPU_SB1
808         select SYS_SUPPORTS_BIG_ENDIAN
809         select SYS_SUPPORTS_HIGHMEM
810         select SYS_SUPPORTS_LITTLE_ENDIAN
811         select ZONE_DMA32 if 64BIT
812
813 config SIBYTE_SENTOSA
814         bool "Sibyte BCM91250E-Sentosa"
815         select BOOT_ELF32
816         select SIBYTE_SB1250
817         select SWAP_IO_SPACE
818         select SYS_HAS_CPU_SB1
819         select SYS_SUPPORTS_BIG_ENDIAN
820         select SYS_SUPPORTS_LITTLE_ENDIAN
821         select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
822
823 config SIBYTE_BIGSUR
824         bool "Sibyte BCM91480B-BigSur"
825         select BOOT_ELF32
826         select NR_CPUS_DEFAULT_4
827         select SIBYTE_BCM1x80
828         select SWAP_IO_SPACE
829         select SYS_HAS_CPU_SB1
830         select SYS_SUPPORTS_BIG_ENDIAN
831         select SYS_SUPPORTS_HIGHMEM
832         select SYS_SUPPORTS_LITTLE_ENDIAN
833         select ZONE_DMA32 if 64BIT
834         select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
835
836 config SNI_RM
837         bool "SNI RM200/300/400"
838         select FW_ARC if CPU_LITTLE_ENDIAN
839         select FW_ARC32 if CPU_LITTLE_ENDIAN
840         select FW_SNIPROM if CPU_BIG_ENDIAN
841         select ARCH_MAY_HAVE_PC_FDC
842         select ARCH_MIGHT_HAVE_PC_PARPORT
843         select ARCH_MIGHT_HAVE_PC_SERIO
844         select BOOT_ELF32
845         select CEVT_R4K
846         select CSRC_R4K
847         select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
848         select DMA_NONCOHERENT
849         select GENERIC_ISA_DMA
850         select HAVE_EISA
851         select HAVE_PCSPKR_PLATFORM
852         select HAVE_PCI
853         select IRQ_MIPS_CPU
854         select I8253
855         select I8259
856         select ISA
857         select SWAP_IO_SPACE if CPU_BIG_ENDIAN
858         select SYS_HAS_CPU_R4X00
859         select SYS_HAS_CPU_R5000
860         select SYS_HAS_CPU_R10000
861         select R5000_CPU_SCACHE
862         select SYS_HAS_EARLY_PRINTK
863         select SYS_SUPPORTS_32BIT_KERNEL
864         select SYS_SUPPORTS_64BIT_KERNEL
865         select SYS_SUPPORTS_BIG_ENDIAN
866         select SYS_SUPPORTS_HIGHMEM
867         select SYS_SUPPORTS_LITTLE_ENDIAN
868         help
869           The SNI RM200/300/400 are MIPS-based machines manufactured by
870           Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
871           Technology and now in turn merged with Fujitsu.  Say Y here to
872           support this machine type.
873
874 config MACH_TX39XX
875         bool "Toshiba TX39 series based machines"
876
877 config MACH_TX49XX
878         bool "Toshiba TX49 series based machines"
879
880 config MIKROTIK_RB532
881         bool "Mikrotik RB532 boards"
882         select CEVT_R4K
883         select CSRC_R4K
884         select DMA_NONCOHERENT
885         select HAVE_PCI
886         select IRQ_MIPS_CPU
887         select SYS_HAS_CPU_MIPS32_R1
888         select SYS_SUPPORTS_32BIT_KERNEL
889         select SYS_SUPPORTS_LITTLE_ENDIAN
890         select SWAP_IO_SPACE
891         select BOOT_RAW
892         select GPIOLIB
893         select MIPS_L1_CACHE_SHIFT_4
894         help
895           Support the Mikrotik(tm) RouterBoard 532 series,
896           based on the IDT RC32434 SoC.
897
898 config CAVIUM_OCTEON_SOC
899         bool "Cavium Networks Octeon SoC based boards"
900         select CEVT_R4K
901         select ARCH_HAS_PHYS_TO_DMA
902         select HAVE_RAPIDIO
903         select PHYS_ADDR_T_64BIT
904         select SYS_SUPPORTS_64BIT_KERNEL
905         select SYS_SUPPORTS_BIG_ENDIAN
906         select EDAC_SUPPORT
907         select EDAC_ATOMIC_SCRUB
908         select SYS_SUPPORTS_LITTLE_ENDIAN
909         select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN
910         select SYS_HAS_EARLY_PRINTK
911         select SYS_HAS_CPU_CAVIUM_OCTEON
912         select HAVE_PCI
913         select ZONE_DMA32
914         select HOLES_IN_ZONE
915         select GPIOLIB
916         select LIBFDT
917         select USE_OF
918         select ARCH_SPARSEMEM_ENABLE
919         select SYS_SUPPORTS_SMP
920         select NR_CPUS_DEFAULT_64
921         select MIPS_NR_CPU_NR_MAP_1024
922         select BUILTIN_DTB
923         select MTD_COMPLEX_MAPPINGS
924         select SWIOTLB
925         select SYS_SUPPORTS_RELOCATABLE
926         help
927           This option supports all of the Octeon reference boards from Cavium
928           Networks. It builds a kernel that dynamically determines the Octeon
929           CPU type and supports all known board reference implementations.
930           Some of the supported boards are:
931                 EBT3000
932                 EBH3000
933                 EBH3100
934                 Thunder
935                 Kodama
936                 Hikari
937           Say Y here for most Octeon reference boards.
938
939 config NLM_XLR_BOARD
940         bool "Netlogic XLR/XLS based systems"
941         select BOOT_ELF32
942         select NLM_COMMON
943         select SYS_HAS_CPU_XLR
944         select SYS_SUPPORTS_SMP
945         select HAVE_PCI
946         select SWAP_IO_SPACE
947         select SYS_SUPPORTS_32BIT_KERNEL
948         select SYS_SUPPORTS_64BIT_KERNEL
949         select PHYS_ADDR_T_64BIT
950         select SYS_SUPPORTS_BIG_ENDIAN
951         select SYS_SUPPORTS_HIGHMEM
952         select NR_CPUS_DEFAULT_32
953         select CEVT_R4K
954         select CSRC_R4K
955         select IRQ_MIPS_CPU
956         select ZONE_DMA32 if 64BIT
957         select SYNC_R4K
958         select SYS_HAS_EARLY_PRINTK
959         select SYS_SUPPORTS_ZBOOT
960         select SYS_SUPPORTS_ZBOOT_UART16550
961         help
962           Support for systems based on Netlogic XLR and XLS processors.
963           Say Y here if you have a XLR or XLS based board.
964
965 config NLM_XLP_BOARD
966         bool "Netlogic XLP based systems"
967         select BOOT_ELF32
968         select NLM_COMMON
969         select SYS_HAS_CPU_XLP
970         select SYS_SUPPORTS_SMP
971         select HAVE_PCI
972         select SYS_SUPPORTS_32BIT_KERNEL
973         select SYS_SUPPORTS_64BIT_KERNEL
974         select PHYS_ADDR_T_64BIT
975         select GPIOLIB
976         select SYS_SUPPORTS_BIG_ENDIAN
977         select SYS_SUPPORTS_LITTLE_ENDIAN
978         select SYS_SUPPORTS_HIGHMEM
979         select NR_CPUS_DEFAULT_32
980         select CEVT_R4K
981         select CSRC_R4K
982         select IRQ_MIPS_CPU
983         select ZONE_DMA32 if 64BIT
984         select SYNC_R4K
985         select SYS_HAS_EARLY_PRINTK
986         select USE_OF
987         select SYS_SUPPORTS_ZBOOT
988         select SYS_SUPPORTS_ZBOOT_UART16550
989         help
990           This board is based on Netlogic XLP Processor.
991           Say Y here if you have a XLP based board.
992
993 config MIPS_PARAVIRT
994         bool "Para-Virtualized guest system"
995         select CEVT_R4K
996         select CSRC_R4K
997         select SYS_SUPPORTS_64BIT_KERNEL
998         select SYS_SUPPORTS_32BIT_KERNEL
999         select SYS_SUPPORTS_BIG_ENDIAN
1000         select SYS_SUPPORTS_SMP
1001         select NR_CPUS_DEFAULT_4
1002         select SYS_HAS_EARLY_PRINTK
1003         select SYS_HAS_CPU_MIPS32_R2
1004         select SYS_HAS_CPU_MIPS64_R2
1005         select SYS_HAS_CPU_CAVIUM_OCTEON
1006         select HAVE_PCI
1007         select SWAP_IO_SPACE
1008         help
1009           This option supports guest running under ????
1010
1011 endchoice
1012
1013 source "arch/mips/alchemy/Kconfig"
1014 source "arch/mips/ath25/Kconfig"
1015 source "arch/mips/ath79/Kconfig"
1016 source "arch/mips/bcm47xx/Kconfig"
1017 source "arch/mips/bcm63xx/Kconfig"
1018 source "arch/mips/bmips/Kconfig"
1019 source "arch/mips/generic/Kconfig"
1020 source "arch/mips/jazz/Kconfig"
1021 source "arch/mips/jz4740/Kconfig"
1022 source "arch/mips/lantiq/Kconfig"
1023 source "arch/mips/lasat/Kconfig"
1024 source "arch/mips/pic32/Kconfig"
1025 source "arch/mips/pistachio/Kconfig"
1026 source "arch/mips/pmcs-msp71xx/Kconfig"
1027 source "arch/mips/ralink/Kconfig"
1028 source "arch/mips/sgi-ip27/Kconfig"
1029 source "arch/mips/sibyte/Kconfig"
1030 source "arch/mips/txx9/Kconfig"
1031 source "arch/mips/vr41xx/Kconfig"
1032 source "arch/mips/cavium-octeon/Kconfig"
1033 source "arch/mips/loongson32/Kconfig"
1034 source "arch/mips/loongson64/Kconfig"
1035 source "arch/mips/netlogic/Kconfig"
1036 source "arch/mips/paravirt/Kconfig"
1037
1038 endmenu
1039
1040 config RWSEM_GENERIC_SPINLOCK
1041         bool
1042         default y
1043
1044 config RWSEM_XCHGADD_ALGORITHM
1045         bool
1046
1047 config GENERIC_HWEIGHT
1048         bool
1049         default y
1050
1051 config GENERIC_CALIBRATE_DELAY
1052         bool
1053         default y
1054
1055 config SCHED_OMIT_FRAME_POINTER
1056         bool
1057         default y
1058
1059 #
1060 # Select some configuration options automatically based on user selections.
1061 #
1062 config FW_ARC
1063         bool
1064
1065 config ARCH_MAY_HAVE_PC_FDC
1066         bool
1067
1068 config BOOT_RAW
1069         bool
1070
1071 config CEVT_BCM1480
1072         bool
1073
1074 config CEVT_DS1287
1075         bool
1076
1077 config CEVT_GT641XX
1078         bool
1079
1080 config CEVT_R4K
1081         bool
1082
1083 config CEVT_SB1250
1084         bool
1085
1086 config CEVT_TXX9
1087         bool
1088
1089 config CSRC_BCM1480
1090         bool
1091
1092 config CSRC_IOASIC
1093         bool
1094
1095 config CSRC_R4K
1096         bool
1097
1098 config CSRC_SB1250
1099         bool
1100
1101 config MIPS_CLOCK_VSYSCALL
1102         def_bool CSRC_R4K || CLKSRC_MIPS_GIC
1103
1104 config GPIO_TXX9
1105         select GPIOLIB
1106         bool
1107
1108 config FW_CFE
1109         bool
1110
1111 config ARCH_SUPPORTS_UPROBES
1112         bool
1113
1114 config DMA_MAYBE_COHERENT
1115         select ARCH_HAS_DMA_COHERENCE_H
1116         select DMA_NONCOHERENT
1117         bool
1118
1119 config DMA_PERDEV_COHERENT
1120         bool
1121         select DMA_NONCOHERENT
1122
1123 config DMA_NONCOHERENT
1124         bool
1125         select ARCH_HAS_DMA_MMAP_PGPROT
1126         select ARCH_HAS_SYNC_DMA_FOR_DEVICE
1127         select NEED_DMA_MAP_STATE
1128         select ARCH_HAS_DMA_COHERENT_TO_PFN
1129         select DMA_NONCOHERENT_CACHE_SYNC
1130
1131 config SYS_HAS_EARLY_PRINTK
1132         bool
1133
1134 config SYS_SUPPORTS_HOTPLUG_CPU
1135         bool
1136
1137 config MIPS_BONITO64
1138         bool
1139
1140 config MIPS_MSC
1141         bool
1142
1143 config MIPS_NILE4
1144         bool
1145
1146 config SYNC_R4K
1147         bool
1148
1149 config MIPS_MACHINE
1150         def_bool n
1151
1152 config NO_IOPORT_MAP
1153         def_bool n
1154
1155 config GENERIC_CSUM
1156         bool
1157         default y if !CPU_HAS_LOAD_STORE_LR
1158
1159 config GENERIC_ISA_DMA
1160         bool
1161         select ZONE_DMA if GENERIC_ISA_DMA_SUPPORT_BROKEN=n
1162         select ISA_DMA_API
1163
1164 config GENERIC_ISA_DMA_SUPPORT_BROKEN
1165         bool
1166         select GENERIC_ISA_DMA
1167
1168 config ISA_DMA_API
1169         bool
1170
1171 config HOLES_IN_ZONE
1172         bool
1173
1174 config SYS_SUPPORTS_RELOCATABLE
1175         bool
1176         help
1177          Selected if the platform supports relocating the kernel.
1178          The platform must provide plat_get_fdt() if it selects CONFIG_USE_OF
1179          to allow access to command line and entropy sources.
1180
1181 config MIPS_CBPF_JIT
1182         def_bool y
1183         depends on BPF_JIT && HAVE_CBPF_JIT
1184
1185 config MIPS_EBPF_JIT
1186         def_bool y
1187         depends on BPF_JIT && HAVE_EBPF_JIT
1188
1189
1190 #
1191 # Endianness selection.  Sufficiently obscure so many users don't know what to
1192 # answer,so we try hard to limit the available choices.  Also the use of a
1193 # choice statement should be more obvious to the user.
1194 #
1195 choice
1196         prompt "Endianness selection"
1197         help
1198           Some MIPS machines can be configured for either little or big endian
1199           byte order. These modes require different kernels and a different
1200           Linux distribution.  In general there is one preferred byteorder for a
1201           particular system but some systems are just as commonly used in the
1202           one or the other endianness.
1203
1204 config CPU_BIG_ENDIAN
1205         bool "Big endian"
1206         depends on SYS_SUPPORTS_BIG_ENDIAN
1207
1208 config CPU_LITTLE_ENDIAN
1209         bool "Little endian"
1210         depends on SYS_SUPPORTS_LITTLE_ENDIAN
1211
1212 endchoice
1213
1214 config EXPORT_UASM
1215         bool
1216
1217 config SYS_SUPPORTS_APM_EMULATION
1218         bool
1219
1220 config SYS_SUPPORTS_BIG_ENDIAN
1221         bool
1222
1223 config SYS_SUPPORTS_LITTLE_ENDIAN
1224         bool
1225
1226 config SYS_SUPPORTS_HUGETLBFS
1227         bool
1228         depends on CPU_SUPPORTS_HUGEPAGES && 64BIT
1229         default y
1230
1231 config MIPS_HUGE_TLB_SUPPORT
1232         def_bool HUGETLB_PAGE || TRANSPARENT_HUGEPAGE
1233
1234 config IRQ_CPU_RM7K
1235         bool
1236
1237 config IRQ_MSP_SLP
1238         bool
1239
1240 config IRQ_MSP_CIC
1241         bool
1242
1243 config IRQ_TXX9
1244         bool
1245
1246 config IRQ_GT641XX
1247         bool
1248
1249 config PCI_GT64XXX_PCI0
1250         bool
1251
1252 config NO_EXCEPT_FILL
1253         bool
1254
1255 config SOC_EMMA2RH
1256         bool
1257         select CEVT_R4K
1258         select CSRC_R4K
1259         select DMA_NONCOHERENT
1260         select IRQ_MIPS_CPU
1261         select SWAP_IO_SPACE
1262         select SYS_HAS_CPU_R5500
1263         select SYS_SUPPORTS_32BIT_KERNEL
1264         select SYS_SUPPORTS_64BIT_KERNEL
1265         select SYS_SUPPORTS_BIG_ENDIAN
1266
1267 config SOC_PNX833X
1268         bool
1269         select CEVT_R4K
1270         select CSRC_R4K
1271         select IRQ_MIPS_CPU
1272         select DMA_NONCOHERENT
1273         select SYS_HAS_CPU_MIPS32_R2
1274         select SYS_SUPPORTS_32BIT_KERNEL
1275         select SYS_SUPPORTS_LITTLE_ENDIAN
1276         select SYS_SUPPORTS_BIG_ENDIAN
1277         select SYS_SUPPORTS_MIPS16
1278         select CPU_MIPSR2_IRQ_VI
1279
1280 config SOC_PNX8335
1281         bool
1282         select SOC_PNX833X
1283
1284 config MIPS_SPRAM
1285         bool
1286
1287 config SWAP_IO_SPACE
1288         bool
1289
1290 config SGI_HAS_INDYDOG
1291         bool
1292
1293 config SGI_HAS_HAL2
1294         bool
1295
1296 config SGI_HAS_SEEQ
1297         bool
1298
1299 config SGI_HAS_WD93
1300         bool
1301
1302 config SGI_HAS_ZILOG
1303         bool
1304
1305 config SGI_HAS_I8042
1306         bool
1307
1308 config DEFAULT_SGI_PARTITION
1309         bool
1310
1311 config FW_ARC32
1312         bool
1313
1314 config FW_SNIPROM
1315         bool
1316
1317 config BOOT_ELF32
1318         bool
1319
1320 config MIPS_L1_CACHE_SHIFT_4
1321         bool
1322
1323 config MIPS_L1_CACHE_SHIFT_5
1324         bool
1325
1326 config MIPS_L1_CACHE_SHIFT_6
1327         bool
1328
1329 config MIPS_L1_CACHE_SHIFT_7
1330         bool
1331
1332 config MIPS_L1_CACHE_SHIFT
1333         int
1334         default "7" if MIPS_L1_CACHE_SHIFT_7
1335         default "6" if MIPS_L1_CACHE_SHIFT_6
1336         default "5" if MIPS_L1_CACHE_SHIFT_5
1337         default "4" if MIPS_L1_CACHE_SHIFT_4
1338         default "5"
1339
1340 config HAVE_STD_PC_SERIAL_PORT
1341         bool
1342
1343 config ARC_CONSOLE
1344         bool "ARC console support"
1345         depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN)
1346
1347 config ARC_MEMORY
1348         bool
1349         depends on MACH_JAZZ || SNI_RM || SGI_IP32
1350         default y
1351
1352 config ARC_PROMLIB
1353         bool
1354         depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32
1355         default y
1356
1357 config FW_ARC64
1358         bool
1359
1360 config BOOT_ELF64
1361         bool
1362
1363 menu "CPU selection"
1364
1365 choice
1366         prompt "CPU type"
1367         default CPU_R4X00
1368
1369 config CPU_LOONGSON3
1370         bool "Loongson 3 CPU"
1371         depends on SYS_HAS_CPU_LOONGSON3
1372         select ARCH_HAS_PHYS_TO_DMA
1373         select CPU_SUPPORTS_64BIT_KERNEL
1374         select CPU_SUPPORTS_HIGHMEM
1375         select CPU_SUPPORTS_HUGEPAGES
1376         select CPU_HAS_LOAD_STORE_LR
1377         select WEAK_ORDERING
1378         select WEAK_REORDERING_BEYOND_LLSC
1379         select MIPS_PGD_C0_CONTEXT
1380         select MIPS_L1_CACHE_SHIFT_6
1381         select GPIOLIB
1382         select SWIOTLB
1383         help
1384                 The Loongson 3 processor implements the MIPS64R2 instruction
1385                 set with many extensions.
1386
1387 config LOONGSON3_ENHANCEMENT
1388         bool "New Loongson 3 CPU Enhancements"
1389         default n
1390         select CPU_MIPSR2
1391         select CPU_HAS_PREFETCH
1392         depends on CPU_LOONGSON3
1393         help
1394           New Loongson 3 CPU (since Loongson-3A R2, as opposed to Loongson-3A
1395           R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as
1396           FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPv2 ASE, User
1397           Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer),
1398           Fast TLB refill support, etc.
1399
1400           This option enable those enhancements which are not probed at run
1401           time. If you want a generic kernel to run on all Loongson 3 machines,
1402           please say 'N' here. If you want a high-performance kernel to run on
1403           new Loongson 3 machines only, please say 'Y' here.
1404
1405 config CPU_LOONGSON3_WORKAROUNDS
1406         bool "Old Loongson 3 LLSC Workarounds"
1407         default y if SMP
1408         depends on CPU_LOONGSON3
1409         help
1410           Loongson 3 processors have the llsc issues which require workarounds.
1411           Without workarounds the system may hang unexpectedly.
1412
1413           Newer Loongson 3 will fix these issues and no workarounds are needed.
1414           The workarounds have no significant side effect on them but may
1415           decrease the performance of the system so this option should be
1416           disabled unless the kernel is intended to be run on old systems.
1417
1418           If unsure, please say Y.
1419
1420 config CPU_LOONGSON2E
1421         bool "Loongson 2E"
1422         depends on SYS_HAS_CPU_LOONGSON2E
1423         select CPU_LOONGSON2
1424         help
1425           The Loongson 2E processor implements the MIPS III instruction set
1426           with many extensions.
1427
1428           It has an internal FPGA northbridge, which is compatible to
1429           bonito64.
1430
1431 config CPU_LOONGSON2F
1432         bool "Loongson 2F"
1433         depends on SYS_HAS_CPU_LOONGSON2F
1434         select CPU_LOONGSON2
1435         select GPIOLIB
1436         help
1437           The Loongson 2F processor implements the MIPS III instruction set
1438           with many extensions.
1439
1440           Loongson2F have built-in DDR2 and PCIX controller. The PCIX controller
1441           have a similar programming interface with FPGA northbridge used in
1442           Loongson2E.
1443
1444 config CPU_LOONGSON1B
1445         bool "Loongson 1B"
1446         depends on SYS_HAS_CPU_LOONGSON1B
1447         select CPU_LOONGSON1
1448         select LEDS_GPIO_REGISTER
1449         help
1450           The Loongson 1B is a 32-bit SoC, which implements the MIPS32
1451           Release 1 instruction set and part of the MIPS32 Release 2
1452           instruction set.
1453
1454 config CPU_LOONGSON1C
1455         bool "Loongson 1C"
1456         depends on SYS_HAS_CPU_LOONGSON1C
1457         select CPU_LOONGSON1
1458         select LEDS_GPIO_REGISTER
1459         help
1460           The Loongson 1C is a 32-bit SoC, which implements the MIPS32
1461           Release 1 instruction set and part of the MIPS32 Release 2
1462           instruction set.
1463
1464 config CPU_MIPS32_R1
1465         bool "MIPS32 Release 1"
1466         depends on SYS_HAS_CPU_MIPS32_R1
1467         select CPU_HAS_PREFETCH
1468         select CPU_HAS_LOAD_STORE_LR
1469         select CPU_SUPPORTS_32BIT_KERNEL
1470         select CPU_SUPPORTS_HIGHMEM
1471         help
1472           Choose this option to build a kernel for release 1 or later of the
1473           MIPS32 architecture.  Most modern embedded systems with a 32-bit
1474           MIPS processor are based on a MIPS32 processor.  If you know the
1475           specific type of processor in your system, choose those that one
1476           otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
1477           Release 2 of the MIPS32 architecture is available since several
1478           years so chances are you even have a MIPS32 Release 2 processor
1479           in which case you should choose CPU_MIPS32_R2 instead for better
1480           performance.
1481
1482 config CPU_MIPS32_R2
1483         bool "MIPS32 Release 2"
1484         depends on SYS_HAS_CPU_MIPS32_R2
1485         select CPU_HAS_PREFETCH
1486         select CPU_HAS_LOAD_STORE_LR
1487         select CPU_SUPPORTS_32BIT_KERNEL
1488         select CPU_SUPPORTS_HIGHMEM
1489         select CPU_SUPPORTS_MSA
1490         select HAVE_KVM
1491         help
1492           Choose this option to build a kernel for release 2 or later of the
1493           MIPS32 architecture.  Most modern embedded systems with a 32-bit
1494           MIPS processor are based on a MIPS32 processor.  If you know the
1495           specific type of processor in your system, choose those that one
1496           otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system.
1497
1498 config CPU_MIPS32_R6
1499         bool "MIPS32 Release 6"
1500         depends on SYS_HAS_CPU_MIPS32_R6
1501         select CPU_HAS_PREFETCH
1502         select CPU_SUPPORTS_32BIT_KERNEL
1503         select CPU_SUPPORTS_HIGHMEM
1504         select CPU_SUPPORTS_MSA
1505         select HAVE_KVM
1506         select MIPS_O32_FP64_SUPPORT
1507         help
1508           Choose this option to build a kernel for release 6 or later of the
1509           MIPS32 architecture.  New MIPS processors, starting with the Warrior
1510           family, are based on a MIPS32r6 processor. If you own an older
1511           processor, you probably need to select MIPS32r1 or MIPS32r2 instead.
1512
1513 config CPU_MIPS64_R1
1514         bool "MIPS64 Release 1"
1515         depends on SYS_HAS_CPU_MIPS64_R1
1516         select CPU_HAS_PREFETCH
1517         select CPU_HAS_LOAD_STORE_LR
1518         select CPU_SUPPORTS_32BIT_KERNEL
1519         select CPU_SUPPORTS_64BIT_KERNEL
1520         select CPU_SUPPORTS_HIGHMEM
1521         select CPU_SUPPORTS_HUGEPAGES
1522         help
1523           Choose this option to build a kernel for release 1 or later of the
1524           MIPS64 architecture.  Many modern embedded systems with a 64-bit
1525           MIPS processor are based on a MIPS64 processor.  If you know the
1526           specific type of processor in your system, choose those that one
1527           otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
1528           Release 2 of the MIPS64 architecture is available since several
1529           years so chances are you even have a MIPS64 Release 2 processor
1530           in which case you should choose CPU_MIPS64_R2 instead for better
1531           performance.
1532
1533 config CPU_MIPS64_R2
1534         bool "MIPS64 Release 2"
1535         depends on SYS_HAS_CPU_MIPS64_R2
1536         select CPU_HAS_PREFETCH
1537         select CPU_HAS_LOAD_STORE_LR
1538         select CPU_SUPPORTS_32BIT_KERNEL
1539         select CPU_SUPPORTS_64BIT_KERNEL
1540         select CPU_SUPPORTS_HIGHMEM
1541         select CPU_SUPPORTS_HUGEPAGES
1542         select CPU_SUPPORTS_MSA
1543         select HAVE_KVM
1544         help
1545           Choose this option to build a kernel for release 2 or later of the
1546           MIPS64 architecture.  Many modern embedded systems with a 64-bit
1547           MIPS processor are based on a MIPS64 processor.  If you know the
1548           specific type of processor in your system, choose those that one
1549           otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system.
1550
1551 config CPU_MIPS64_R6
1552         bool "MIPS64 Release 6"
1553         depends on SYS_HAS_CPU_MIPS64_R6
1554         select CPU_HAS_PREFETCH
1555         select CPU_SUPPORTS_32BIT_KERNEL
1556         select CPU_SUPPORTS_64BIT_KERNEL
1557         select CPU_SUPPORTS_HIGHMEM
1558         select CPU_SUPPORTS_HUGEPAGES
1559         select CPU_SUPPORTS_MSA
1560         select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32
1561         select HAVE_KVM
1562         help
1563           Choose this option to build a kernel for release 6 or later of the
1564           MIPS64 architecture.  New MIPS processors, starting with the Warrior
1565           family, are based on a MIPS64r6 processor. If you own an older
1566           processor, you probably need to select MIPS64r1 or MIPS64r2 instead.
1567
1568 config CPU_R3000
1569         bool "R3000"
1570         depends on SYS_HAS_CPU_R3000
1571         select CPU_HAS_WB
1572         select CPU_HAS_LOAD_STORE_LR
1573         select CPU_SUPPORTS_32BIT_KERNEL
1574         select CPU_SUPPORTS_HIGHMEM
1575         help
1576           Please make sure to pick the right CPU type. Linux/MIPS is not
1577           designed to be generic, i.e. Kernels compiled for R3000 CPUs will
1578           *not* work on R4000 machines and vice versa.  However, since most
1579           of the supported machines have an R4000 (or similar) CPU, R4x00
1580           might be a safe bet.  If the resulting kernel does not work,
1581           try to recompile with R3000.
1582
1583 config CPU_TX39XX
1584         bool "R39XX"
1585         depends on SYS_HAS_CPU_TX39XX
1586         select CPU_SUPPORTS_32BIT_KERNEL
1587         select CPU_HAS_LOAD_STORE_LR
1588
1589 config CPU_VR41XX
1590         bool "R41xx"
1591         depends on SYS_HAS_CPU_VR41XX
1592         select CPU_SUPPORTS_32BIT_KERNEL
1593         select CPU_SUPPORTS_64BIT_KERNEL
1594         select CPU_HAS_LOAD_STORE_LR
1595         help
1596           The options selects support for the NEC VR4100 series of processors.
1597           Only choose this option if you have one of these processors as a
1598           kernel built with this option will not run on any other type of
1599           processor or vice versa.
1600
1601 config CPU_R4300
1602         bool "R4300"
1603         depends on SYS_HAS_CPU_R4300
1604         select CPU_SUPPORTS_32BIT_KERNEL
1605         select CPU_SUPPORTS_64BIT_KERNEL
1606         select CPU_HAS_LOAD_STORE_LR
1607         help
1608           MIPS Technologies R4300-series processors.
1609
1610 config CPU_R4X00
1611         bool "R4x00"
1612         depends on SYS_HAS_CPU_R4X00
1613         select CPU_SUPPORTS_32BIT_KERNEL
1614         select CPU_SUPPORTS_64BIT_KERNEL
1615         select CPU_SUPPORTS_HUGEPAGES
1616         select CPU_HAS_LOAD_STORE_LR
1617         help
1618           MIPS Technologies R4000-series processors other than 4300, including
1619           the R4000, R4400, R4600, and 4700.
1620
1621 config CPU_TX49XX
1622         bool "R49XX"
1623         depends on SYS_HAS_CPU_TX49XX
1624         select CPU_HAS_PREFETCH
1625         select CPU_HAS_LOAD_STORE_LR
1626         select CPU_SUPPORTS_32BIT_KERNEL
1627         select CPU_SUPPORTS_64BIT_KERNEL
1628         select CPU_SUPPORTS_HUGEPAGES
1629
1630 config CPU_R5000
1631         bool "R5000"
1632         depends on SYS_HAS_CPU_R5000
1633         select CPU_SUPPORTS_32BIT_KERNEL
1634         select CPU_SUPPORTS_64BIT_KERNEL
1635         select CPU_SUPPORTS_HUGEPAGES
1636         select CPU_HAS_LOAD_STORE_LR
1637         help
1638           MIPS Technologies R5000-series processors other than the Nevada.
1639
1640 config CPU_R5432
1641         bool "R5432"
1642         depends on SYS_HAS_CPU_R5432
1643         select CPU_SUPPORTS_32BIT_KERNEL
1644         select CPU_SUPPORTS_64BIT_KERNEL
1645         select CPU_SUPPORTS_HUGEPAGES
1646         select CPU_HAS_LOAD_STORE_LR
1647
1648 config CPU_R5500
1649         bool "R5500"
1650         depends on SYS_HAS_CPU_R5500
1651         select CPU_SUPPORTS_32BIT_KERNEL
1652         select CPU_SUPPORTS_64BIT_KERNEL
1653         select CPU_SUPPORTS_HUGEPAGES
1654         select CPU_HAS_LOAD_STORE_LR
1655         help
1656           NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
1657           instruction set.
1658
1659 config CPU_NEVADA
1660         bool "RM52xx"
1661         depends on SYS_HAS_CPU_NEVADA
1662         select CPU_SUPPORTS_32BIT_KERNEL
1663         select CPU_SUPPORTS_64BIT_KERNEL
1664         select CPU_SUPPORTS_HUGEPAGES
1665         select CPU_HAS_LOAD_STORE_LR
1666         help
1667           QED / PMC-Sierra RM52xx-series ("Nevada") processors.
1668
1669 config CPU_R8000
1670         bool "R8000"
1671         depends on SYS_HAS_CPU_R8000
1672         select CPU_HAS_PREFETCH
1673         select CPU_HAS_LOAD_STORE_LR
1674         select CPU_SUPPORTS_64BIT_KERNEL
1675         help
1676           MIPS Technologies R8000 processors.  Note these processors are
1677           uncommon and the support for them is incomplete.
1678
1679 config CPU_R10000
1680         bool "R10000"
1681         depends on SYS_HAS_CPU_R10000
1682         select CPU_HAS_PREFETCH
1683         select CPU_HAS_LOAD_STORE_LR
1684         select CPU_SUPPORTS_32BIT_KERNEL
1685         select CPU_SUPPORTS_64BIT_KERNEL
1686         select CPU_SUPPORTS_HIGHMEM
1687         select CPU_SUPPORTS_HUGEPAGES
1688         help
1689           MIPS Technologies R10000-series processors.
1690
1691 config CPU_RM7000
1692         bool "RM7000"
1693         depends on SYS_HAS_CPU_RM7000
1694         select CPU_HAS_PREFETCH
1695         select CPU_HAS_LOAD_STORE_LR
1696         select CPU_SUPPORTS_32BIT_KERNEL
1697         select CPU_SUPPORTS_64BIT_KERNEL
1698         select CPU_SUPPORTS_HIGHMEM
1699         select CPU_SUPPORTS_HUGEPAGES
1700
1701 config CPU_SB1
1702         bool "SB1"
1703         depends on SYS_HAS_CPU_SB1
1704         select CPU_HAS_LOAD_STORE_LR
1705         select CPU_SUPPORTS_32BIT_KERNEL
1706         select CPU_SUPPORTS_64BIT_KERNEL
1707         select CPU_SUPPORTS_HIGHMEM
1708         select CPU_SUPPORTS_HUGEPAGES
1709         select WEAK_ORDERING
1710
1711 config CPU_CAVIUM_OCTEON
1712         bool "Cavium Octeon processor"
1713         depends on SYS_HAS_CPU_CAVIUM_OCTEON
1714         select CPU_HAS_PREFETCH
1715         select CPU_HAS_LOAD_STORE_LR
1716         select CPU_SUPPORTS_64BIT_KERNEL
1717         select WEAK_ORDERING
1718         select CPU_SUPPORTS_HIGHMEM
1719         select CPU_SUPPORTS_HUGEPAGES
1720         select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
1721         select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
1722         select MIPS_L1_CACHE_SHIFT_7
1723         select HAVE_KVM
1724         help
1725           The Cavium Octeon processor is a highly integrated chip containing
1726           many ethernet hardware widgets for networking tasks. The processor
1727           can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
1728           Full details can be found at http://www.caviumnetworks.com.
1729
1730 config CPU_BMIPS
1731         bool "Broadcom BMIPS"
1732         depends on SYS_HAS_CPU_BMIPS
1733         select CPU_MIPS32
1734         select CPU_BMIPS32_3300 if SYS_HAS_CPU_BMIPS32_3300
1735         select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
1736         select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380
1737         select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
1738         select CPU_SUPPORTS_32BIT_KERNEL
1739         select DMA_NONCOHERENT
1740         select IRQ_MIPS_CPU
1741         select SWAP_IO_SPACE
1742         select WEAK_ORDERING
1743         select CPU_SUPPORTS_HIGHMEM
1744         select CPU_HAS_PREFETCH
1745         select CPU_HAS_LOAD_STORE_LR
1746         select CPU_SUPPORTS_CPUFREQ
1747         select MIPS_EXTERNAL_TIMER
1748         help
1749           Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors.
1750
1751 config CPU_XLR
1752         bool "Netlogic XLR SoC"
1753         depends on SYS_HAS_CPU_XLR
1754         select CPU_HAS_LOAD_STORE_LR
1755         select CPU_SUPPORTS_32BIT_KERNEL
1756         select CPU_SUPPORTS_64BIT_KERNEL
1757         select CPU_SUPPORTS_HIGHMEM
1758         select CPU_SUPPORTS_HUGEPAGES
1759         select WEAK_ORDERING
1760         select WEAK_REORDERING_BEYOND_LLSC
1761         help
1762           Netlogic Microsystems XLR/XLS processors.
1763
1764 config CPU_XLP
1765         bool "Netlogic XLP SoC"
1766         depends on SYS_HAS_CPU_XLP
1767         select CPU_SUPPORTS_32BIT_KERNEL
1768         select CPU_SUPPORTS_64BIT_KERNEL
1769         select CPU_SUPPORTS_HIGHMEM
1770         select WEAK_ORDERING
1771         select WEAK_REORDERING_BEYOND_LLSC
1772         select CPU_HAS_PREFETCH
1773         select CPU_HAS_LOAD_STORE_LR
1774         select CPU_MIPSR2
1775         select CPU_SUPPORTS_HUGEPAGES
1776         select MIPS_ASID_BITS_VARIABLE
1777         help
1778           Netlogic Microsystems XLP processors.
1779 endchoice
1780
1781 config CPU_MIPS32_3_5_FEATURES
1782         bool "MIPS32 Release 3.5 Features"
1783         depends on SYS_HAS_CPU_MIPS32_R3_5
1784         depends on CPU_MIPS32_R2 || CPU_MIPS32_R6
1785         help
1786           Choose this option to build a kernel for release 2 or later of the
1787           MIPS32 architecture including features from the 3.5 release such as
1788           support for Enhanced Virtual Addressing (EVA).
1789
1790 config CPU_MIPS32_3_5_EVA
1791         bool "Enhanced Virtual Addressing (EVA)"
1792         depends on CPU_MIPS32_3_5_FEATURES
1793         select EVA
1794         default y
1795         help
1796           Choose this option if you want to enable the Enhanced Virtual
1797           Addressing (EVA) on your MIPS32 core (such as proAptiv).
1798           One of its primary benefits is an increase in the maximum size
1799           of lowmem (up to 3GB). If unsure, say 'N' here.
1800
1801 config CPU_MIPS32_R5_FEATURES
1802         bool "MIPS32 Release 5 Features"
1803         depends on SYS_HAS_CPU_MIPS32_R5
1804         depends on CPU_MIPS32_R2
1805         help
1806           Choose this option to build a kernel for release 2 or later of the
1807           MIPS32 architecture including features from release 5 such as
1808           support for Extended Physical Addressing (XPA).
1809
1810 config CPU_MIPS32_R5_XPA
1811         bool "Extended Physical Addressing (XPA)"
1812         depends on CPU_MIPS32_R5_FEATURES
1813         depends on !EVA
1814         depends on !PAGE_SIZE_4KB
1815         depends on SYS_SUPPORTS_HIGHMEM
1816         select XPA
1817         select HIGHMEM
1818         select PHYS_ADDR_T_64BIT
1819         default n
1820         help
1821           Choose this option if you want to enable the Extended Physical
1822           Addressing (XPA) on your MIPS32 core (such as P5600 series). The
1823           benefit is to increase physical addressing equal to or greater
1824           than 40 bits. Note that this has the side effect of turning on
1825           64-bit addressing which in turn makes the PTEs 64-bit in size.
1826           If unsure, say 'N' here.
1827
1828 if CPU_LOONGSON2F
1829 config CPU_NOP_WORKAROUNDS
1830         bool
1831
1832 config CPU_JUMP_WORKAROUNDS
1833         bool
1834
1835 config CPU_LOONGSON2F_WORKAROUNDS
1836         bool "Loongson 2F Workarounds"
1837         default y
1838         select CPU_NOP_WORKAROUNDS
1839         select CPU_JUMP_WORKAROUNDS
1840         help
1841           Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which
1842           require workarounds.  Without workarounds the system may hang
1843           unexpectedly.  For more information please refer to the gas
1844           -mfix-loongson2f-nop and -mfix-loongson2f-jump options.
1845
1846           Loongson 2F03 and later have fixed these issues and no workarounds
1847           are needed.  The workarounds have no significant side effect on them
1848           but may decrease the performance of the system so this option should
1849           be disabled unless the kernel is intended to be run on 2F01 or 2F02
1850           systems.
1851
1852           If unsure, please say Y.
1853 endif # CPU_LOONGSON2F
1854
1855 config SYS_SUPPORTS_ZBOOT
1856         bool
1857         select HAVE_KERNEL_GZIP
1858         select HAVE_KERNEL_BZIP2
1859         select HAVE_KERNEL_LZ4
1860         select HAVE_KERNEL_LZMA
1861         select HAVE_KERNEL_LZO
1862         select HAVE_KERNEL_XZ
1863
1864 config SYS_SUPPORTS_ZBOOT_UART16550
1865         bool
1866         select SYS_SUPPORTS_ZBOOT
1867
1868 config SYS_SUPPORTS_ZBOOT_UART_PROM
1869         bool
1870         select SYS_SUPPORTS_ZBOOT
1871
1872 config CPU_LOONGSON2
1873         bool
1874         select CPU_SUPPORTS_32BIT_KERNEL
1875         select CPU_SUPPORTS_64BIT_KERNEL
1876         select CPU_SUPPORTS_HIGHMEM
1877         select CPU_SUPPORTS_HUGEPAGES
1878         select ARCH_HAS_PHYS_TO_DMA
1879         select CPU_HAS_LOAD_STORE_LR
1880
1881 config CPU_LOONGSON1
1882         bool
1883         select CPU_MIPS32
1884         select CPU_MIPSR2
1885         select CPU_HAS_PREFETCH
1886         select CPU_HAS_LOAD_STORE_LR
1887         select CPU_SUPPORTS_32BIT_KERNEL
1888         select CPU_SUPPORTS_HIGHMEM
1889         select CPU_SUPPORTS_CPUFREQ
1890
1891 config CPU_BMIPS32_3300
1892         select SMP_UP if SMP
1893         bool
1894
1895 config CPU_BMIPS4350
1896         bool
1897         select SYS_SUPPORTS_SMP
1898         select SYS_SUPPORTS_HOTPLUG_CPU
1899
1900 config CPU_BMIPS4380
1901         bool
1902         select MIPS_L1_CACHE_SHIFT_6
1903         select SYS_SUPPORTS_SMP
1904         select SYS_SUPPORTS_HOTPLUG_CPU
1905         select CPU_HAS_RIXI
1906
1907 config CPU_BMIPS5000
1908         bool
1909         select MIPS_CPU_SCACHE
1910         select MIPS_L1_CACHE_SHIFT_7
1911         select SYS_SUPPORTS_SMP
1912         select SYS_SUPPORTS_HOTPLUG_CPU
1913         select CPU_HAS_RIXI
1914
1915 config SYS_HAS_CPU_LOONGSON3
1916         bool
1917         select CPU_SUPPORTS_CPUFREQ
1918         select CPU_HAS_RIXI
1919
1920 config SYS_HAS_CPU_LOONGSON2E
1921         bool
1922
1923 config SYS_HAS_CPU_LOONGSON2F
1924         bool
1925         select CPU_SUPPORTS_CPUFREQ
1926         select CPU_SUPPORTS_ADDRWINCFG if 64BIT
1927         select CPU_SUPPORTS_UNCACHED_ACCELERATED
1928
1929 config SYS_HAS_CPU_LOONGSON1B
1930         bool
1931
1932 config SYS_HAS_CPU_LOONGSON1C
1933         bool
1934
1935 config SYS_HAS_CPU_MIPS32_R1
1936         bool
1937
1938 config SYS_HAS_CPU_MIPS32_R2
1939         bool
1940
1941 config SYS_HAS_CPU_MIPS32_R3_5
1942         bool
1943
1944 config SYS_HAS_CPU_MIPS32_R5
1945         bool
1946         select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
1947
1948 config SYS_HAS_CPU_MIPS32_R6
1949         bool
1950         select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
1951
1952 config SYS_HAS_CPU_MIPS64_R1
1953         bool
1954
1955 config SYS_HAS_CPU_MIPS64_R2
1956         bool
1957
1958 config SYS_HAS_CPU_MIPS64_R6
1959         bool
1960         select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
1961
1962 config SYS_HAS_CPU_R3000
1963         bool
1964
1965 config SYS_HAS_CPU_TX39XX
1966         bool
1967
1968 config SYS_HAS_CPU_VR41XX
1969         bool
1970
1971 config SYS_HAS_CPU_R4300
1972         bool
1973
1974 config SYS_HAS_CPU_R4X00
1975         bool
1976
1977 config SYS_HAS_CPU_TX49XX
1978         bool
1979
1980 config SYS_HAS_CPU_R5000
1981         bool
1982
1983 config SYS_HAS_CPU_R5432
1984         bool
1985
1986 config SYS_HAS_CPU_R5500
1987         bool
1988
1989 config SYS_HAS_CPU_NEVADA
1990         bool
1991
1992 config SYS_HAS_CPU_R8000
1993         bool
1994
1995 config SYS_HAS_CPU_R10000
1996         bool
1997         select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT
1998
1999 config SYS_HAS_CPU_RM7000
2000         bool
2001
2002 config SYS_HAS_CPU_SB1
2003         bool
2004
2005 config SYS_HAS_CPU_CAVIUM_OCTEON
2006         bool
2007
2008 config SYS_HAS_CPU_BMIPS
2009         bool
2010
2011 config SYS_HAS_CPU_BMIPS32_3300
2012         bool
2013         select SYS_HAS_CPU_BMIPS
2014
2015 config SYS_HAS_CPU_BMIPS4350
2016         bool
2017         select SYS_HAS_CPU_BMIPS
2018
2019 config SYS_HAS_CPU_BMIPS4380
2020         bool
2021         select SYS_HAS_CPU_BMIPS
2022
2023 config SYS_HAS_CPU_BMIPS5000
2024         bool
2025         select SYS_HAS_CPU_BMIPS
2026         select ARCH_HAS_SYNC_DMA_FOR_CPU
2027
2028 config SYS_HAS_CPU_XLR
2029         bool
2030
2031 config SYS_HAS_CPU_XLP
2032         bool
2033
2034 #
2035 # CPU may reorder R->R, R->W, W->R, W->W
2036 # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC
2037 #
2038 config WEAK_ORDERING
2039         bool
2040
2041 #
2042 # CPU may reorder reads and writes beyond LL/SC
2043 # CPU may reorder R->LL, R->LL, W->LL, W->LL, R->SC, R->SC, W->SC, W->SC
2044 #
2045 config WEAK_REORDERING_BEYOND_LLSC
2046         bool
2047 endmenu
2048
2049 #
2050 # These two indicate any level of the MIPS32 and MIPS64 architecture
2051 #
2052 config CPU_MIPS32
2053         bool
2054         default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R6
2055
2056 config CPU_MIPS64
2057         bool
2058         default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6
2059
2060 #
2061 # These indicate the revision of the architecture
2062 #
2063 config CPU_MIPSR1
2064         bool
2065         default y if CPU_MIPS32_R1 || CPU_MIPS64_R1
2066
2067 config CPU_MIPSR2
2068         bool
2069         default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
2070         select CPU_HAS_RIXI
2071         select MIPS_SPRAM
2072
2073 config CPU_MIPSR6
2074         bool
2075         default y if CPU_MIPS32_R6 || CPU_MIPS64_R6
2076         select CPU_HAS_RIXI
2077         select HAVE_ARCH_BITREVERSE
2078         select MIPS_ASID_BITS_VARIABLE
2079         select MIPS_CRC_SUPPORT
2080         select MIPS_SPRAM
2081
2082 config TARGET_ISA_REV
2083         int
2084         default 1 if CPU_MIPSR1
2085         default 2 if CPU_MIPSR2
2086         default 6 if CPU_MIPSR6
2087         default 0
2088         help
2089           Reflects the ISA revision being targeted by the kernel build. This
2090           is effectively the Kconfig equivalent of MIPS_ISA_REV.
2091
2092 config EVA
2093         bool
2094
2095 config XPA
2096         bool
2097
2098 config SYS_SUPPORTS_32BIT_KERNEL
2099         bool
2100 config SYS_SUPPORTS_64BIT_KERNEL
2101         bool
2102 config CPU_SUPPORTS_32BIT_KERNEL
2103         bool
2104 config CPU_SUPPORTS_64BIT_KERNEL
2105         bool
2106 config CPU_SUPPORTS_CPUFREQ
2107         bool
2108 config CPU_SUPPORTS_ADDRWINCFG
2109         bool
2110 config CPU_SUPPORTS_HUGEPAGES
2111         bool
2112 config CPU_SUPPORTS_UNCACHED_ACCELERATED
2113         bool
2114 config MIPS_PGD_C0_CONTEXT
2115         bool
2116         default y if 64BIT && (CPU_MIPSR2 || CPU_MIPSR6) && !CPU_XLP
2117
2118 #
2119 # Set to y for ptrace access to watch registers.
2120 #
2121 config HARDWARE_WATCHPOINTS
2122        bool
2123        default y if CPU_MIPSR1 || CPU_MIPSR2 || CPU_MIPSR6
2124
2125 menu "Kernel type"
2126
2127 choice
2128         prompt "Kernel code model"
2129         help
2130           You should only select this option if you have a workload that
2131           actually benefits from 64-bit processing or if your machine has
2132           large memory.  You will only be presented a single option in this
2133           menu if your system does not support both 32-bit and 64-bit kernels.
2134
2135 config 32BIT
2136         bool "32-bit kernel"
2137         depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
2138         select TRAD_SIGNALS
2139         help
2140           Select this option if you want to build a 32-bit kernel.
2141
2142 config 64BIT
2143         bool "64-bit kernel"
2144         depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
2145         help
2146           Select this option if you want to build a 64-bit kernel.
2147
2148 endchoice
2149
2150 config KVM_GUEST
2151         bool "KVM Guest Kernel"
2152         depends on BROKEN_ON_SMP
2153         help
2154           Select this option if building a guest kernel for KVM (Trap & Emulate)
2155           mode.
2156
2157 config KVM_GUEST_TIMER_FREQ
2158         int "Count/Compare Timer Frequency (MHz)"
2159         depends on KVM_GUEST
2160         default 100
2161         help
2162           Set this to non-zero if building a guest kernel for KVM to skip RTC
2163           emulation when determining guest CPU Frequency. Instead, the guest's
2164           timer frequency is specified directly.
2165
2166 config MIPS_VA_BITS_48
2167         bool "48 bits virtual memory"
2168         depends on 64BIT
2169         help
2170           Support a maximum at least 48 bits of application virtual
2171           memory.  Default is 40 bits or less, depending on the CPU.
2172           For page sizes 16k and above, this option results in a small
2173           memory overhead for page tables.  For 4k page size, a fourth
2174           level of page tables is added which imposes both a memory
2175           overhead as well as slower TLB fault handling.
2176
2177           If unsure, say N.
2178
2179 choice
2180         prompt "Kernel page size"
2181         default PAGE_SIZE_4KB
2182
2183 config PAGE_SIZE_4KB
2184         bool "4kB"
2185         depends on !CPU_LOONGSON2 && !CPU_LOONGSON3
2186         help
2187          This option select the standard 4kB Linux page size.  On some
2188          R3000-family processors this is the only available page size.  Using
2189          4kB page size will minimize memory consumption and is therefore
2190          recommended for low memory systems.
2191
2192 config PAGE_SIZE_8KB
2193         bool "8kB"
2194         depends on CPU_R8000 || CPU_CAVIUM_OCTEON
2195         depends on !MIPS_VA_BITS_48
2196         help
2197           Using 8kB page size will result in higher performance kernel at
2198           the price of higher memory consumption.  This option is available
2199           only on R8000 and cnMIPS processors.  Note that you will need a
2200           suitable Linux distribution to support this.
2201
2202 config PAGE_SIZE_16KB
2203         bool "16kB"
2204         depends on !CPU_R3000 && !CPU_TX39XX
2205         help
2206           Using 16kB page size will result in higher performance kernel at
2207           the price of higher memory consumption.  This option is available on
2208           all non-R3000 family processors.  Note that you will need a suitable
2209           Linux distribution to support this.
2210
2211 config PAGE_SIZE_32KB
2212         bool "32kB"
2213         depends on CPU_CAVIUM_OCTEON
2214         depends on !MIPS_VA_BITS_48
2215         help
2216           Using 32kB page size will result in higher performance kernel at
2217           the price of higher memory consumption.  This option is available
2218           only on cnMIPS cores.  Note that you will need a suitable Linux
2219           distribution to support this.
2220
2221 config PAGE_SIZE_64KB
2222         bool "64kB"
2223         depends on !CPU_R3000 && !CPU_TX39XX
2224         help
2225           Using 64kB page size will result in higher performance kernel at
2226           the price of higher memory consumption.  This option is available on
2227           all non-R3000 family processor.  Not that at the time of this
2228           writing this option is still high experimental.
2229
2230 endchoice
2231
2232 config FORCE_MAX_ZONEORDER
2233         int "Maximum zone order"
2234         range 14 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
2235         default "14" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_64KB
2236         range 13 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
2237         default "13" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_32KB
2238         range 12 64 if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
2239         default "12" if MIPS_HUGE_TLB_SUPPORT && PAGE_SIZE_16KB
2240         range 11 64
2241         default "11"
2242         help
2243           The kernel memory allocator divides physically contiguous memory
2244           blocks into "zones", where each zone is a power of two number of
2245           pages.  This option selects the largest power of two that the kernel
2246           keeps in the memory allocator.  If you need to allocate very large
2247           blocks of physically contiguous memory, then you may need to
2248           increase this value.
2249
2250           This config option is actually maximum order plus one. For example,
2251           a value of 11 means that the largest free memory block is 2^10 pages.
2252
2253           The page size is not necessarily 4KB.  Keep this in mind
2254           when choosing a value for this option.
2255
2256 config BOARD_SCACHE
2257         bool
2258
2259 config IP22_CPU_SCACHE
2260         bool
2261         select BOARD_SCACHE
2262
2263 #
2264 # Support for a MIPS32 / MIPS64 style S-caches
2265 #
2266 config MIPS_CPU_SCACHE
2267         bool
2268         select BOARD_SCACHE
2269
2270 config R5000_CPU_SCACHE
2271         bool
2272         select BOARD_SCACHE
2273
2274 config RM7000_CPU_SCACHE
2275         bool
2276         select BOARD_SCACHE
2277
2278 config SIBYTE_DMA_PAGEOPS
2279         bool "Use DMA to clear/copy pages"
2280         depends on CPU_SB1
2281         help
2282           Instead of using the CPU to zero and copy pages, use a Data Mover
2283           channel.  These DMA channels are otherwise unused by the standard
2284           SiByte Linux port.  Seems to give a small performance benefit.
2285
2286 config CPU_HAS_PREFETCH
2287         bool
2288
2289 config CPU_GENERIC_DUMP_TLB
2290         bool
2291         default y if !(CPU_R3000 || CPU_R8000 || CPU_TX39XX)
2292
2293 config MIPS_FP_SUPPORT
2294         bool "Floating Point support" if EXPERT
2295         default y
2296         help
2297           Select y to include support for floating point in the kernel
2298           including initialization of FPU hardware, FP context save & restore
2299           and emulation of an FPU where necessary. Without this support any
2300           userland program attempting to use floating point instructions will
2301           receive a SIGILL.
2302
2303           If you know that your userland will not attempt to use floating point
2304           instructions then you can say n here to shrink the kernel a little.
2305
2306           If unsure, say y.
2307
2308 config CPU_R2300_FPU
2309         bool
2310         depends on MIPS_FP_SUPPORT
2311         default y if CPU_R3000 || CPU_TX39XX
2312
2313 config CPU_R4K_FPU
2314         bool
2315         depends on MIPS_FP_SUPPORT
2316         default y if !CPU_R2300_FPU
2317
2318 config CPU_R4K_CACHE_TLB
2319         bool
2320         default y if !(CPU_R3000 || CPU_R8000 || CPU_SB1 || CPU_TX39XX || CPU_CAVIUM_OCTEON)
2321
2322 config MIPS_MT_SMP
2323         bool "MIPS MT SMP support (1 TC on each available VPE)"
2324         default y
2325         depends on SYS_SUPPORTS_MULTITHREADING && !CPU_MIPSR6 && !CPU_MICROMIPS
2326         select CPU_MIPSR2_IRQ_VI
2327         select CPU_MIPSR2_IRQ_EI
2328         select SYNC_R4K
2329         select MIPS_MT
2330         select SMP
2331         select SMP_UP
2332         select SYS_SUPPORTS_SMP
2333         select SYS_SUPPORTS_SCHED_SMT
2334         select MIPS_PERF_SHARED_TC_COUNTERS
2335         help
2336           This is a kernel model which is known as SMVP. This is supported
2337           on cores with the MT ASE and uses the available VPEs to implement
2338           virtual processors which supports SMP. This is equivalent to the
2339           Intel Hyperthreading feature. For further information go to
2340           <http://www.imgtec.com/mips/mips-multithreading.asp>.
2341
2342 config MIPS_MT
2343         bool
2344
2345 config SCHED_SMT
2346         bool "SMT (multithreading) scheduler support"
2347         depends on SYS_SUPPORTS_SCHED_SMT
2348         default n
2349         help
2350           SMT scheduler support improves the CPU scheduler's decision making
2351           when dealing with MIPS MT enabled cores at a cost of slightly
2352           increased overhead in some places. If unsure say N here.
2353
2354 config SYS_SUPPORTS_SCHED_SMT
2355         bool
2356
2357 config SYS_SUPPORTS_MULTITHREADING
2358         bool
2359
2360 config MIPS_MT_FPAFF
2361         bool "Dynamic FPU affinity for FP-intensive threads"
2362         default y
2363         depends on MIPS_MT_SMP
2364
2365 config MIPSR2_TO_R6_EMULATOR
2366         bool "MIPS R2-to-R6 emulator"
2367         depends on CPU_MIPSR6
2368         depends on MIPS_FP_SUPPORT
2369         default y
2370         help
2371           Choose this option if you want to run non-R6 MIPS userland code.
2372           Even if you say 'Y' here, the emulator will still be disabled by
2373           default. You can enable it using the 'mipsr2emu' kernel option.
2374           The only reason this is a build-time option is to save ~14K from the
2375           final kernel image.
2376
2377 config SYS_SUPPORTS_VPE_LOADER
2378         bool
2379         depends on SYS_SUPPORTS_MULTITHREADING
2380         help
2381           Indicates that the platform supports the VPE loader, and provides
2382           physical_memsize.
2383
2384 config MIPS_VPE_LOADER
2385         bool "VPE loader support."
2386         depends on SYS_SUPPORTS_VPE_LOADER && MODULES
2387         select CPU_MIPSR2_IRQ_VI
2388         select CPU_MIPSR2_IRQ_EI
2389         select MIPS_MT
2390         help
2391           Includes a loader for loading an elf relocatable object
2392           onto another VPE and running it.
2393
2394 config MIPS_VPE_LOADER_CMP
2395         bool
2396         default "y"
2397         depends on MIPS_VPE_LOADER && MIPS_CMP
2398
2399 config MIPS_VPE_LOADER_MT
2400         bool
2401         default "y"
2402         depends on MIPS_VPE_LOADER && !MIPS_CMP
2403
2404 config MIPS_VPE_LOADER_TOM
2405         bool "Load VPE program into memory hidden from linux"
2406         depends on MIPS_VPE_LOADER
2407         default y
2408         help
2409           The loader can use memory that is present but has been hidden from
2410           Linux using the kernel command line option "mem=xxMB". It's up to
2411           you to ensure the amount you put in the option and the space your
2412           program requires is less or equal to the amount physically present.
2413
2414 config MIPS_VPE_APSP_API
2415         bool "Enable support for AP/SP API (RTLX)"
2416         depends on MIPS_VPE_LOADER
2417
2418 config MIPS_VPE_APSP_API_CMP
2419         bool
2420         default "y"
2421         depends on MIPS_VPE_APSP_API && MIPS_CMP
2422
2423 config MIPS_VPE_APSP_API_MT
2424         bool
2425         default "y"
2426         depends on MIPS_VPE_APSP_API && !MIPS_CMP
2427
2428 config MIPS_CMP
2429         bool "MIPS CMP framework support (DEPRECATED)"
2430         depends on SYS_SUPPORTS_MIPS_CMP && !CPU_MIPSR6
2431         select SMP
2432         select SYNC_R4K
2433         select SYS_SUPPORTS_SMP
2434         select WEAK_ORDERING
2435         default n
2436         help
2437           Select this if you are using a bootloader which implements the "CMP
2438           framework" protocol (ie. YAMON) and want your kernel to make use of
2439           its ability to start secondary CPUs.
2440
2441           Unless you have a specific need, you should use CONFIG_MIPS_CPS
2442           instead of this.
2443
2444 config MIPS_CPS
2445         bool "MIPS Coherent Processing System support"
2446         depends on SYS_SUPPORTS_MIPS_CPS
2447         select MIPS_CM
2448         select MIPS_CPS_PM if HOTPLUG_CPU
2449         select SMP
2450         select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
2451         select SYS_SUPPORTS_HOTPLUG_CPU
2452         select SYS_SUPPORTS_SCHED_SMT if CPU_MIPSR6
2453         select SYS_SUPPORTS_SMP
2454         select WEAK_ORDERING
2455         help
2456           Select this if you wish to run an SMP kernel across multiple cores
2457           within a MIPS Coherent Processing System. When this option is
2458           enabled the kernel will probe for other cores and boot them with
2459           no external assistance. It is safe to enable this when hardware
2460           support is unavailable.
2461
2462 config MIPS_CPS_PM
2463         depends on MIPS_CPS
2464         bool
2465
2466 config MIPS_CM
2467         bool
2468         select MIPS_CPC
2469
2470 config MIPS_CPC
2471         bool
2472
2473 config SB1_PASS_2_WORKAROUNDS
2474         bool
2475         depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
2476         default y
2477
2478 config SB1_PASS_2_1_WORKAROUNDS
2479         bool
2480         depends on CPU_SB1 && CPU_SB1_PASS_2
2481         default y
2482
2483
2484 choice
2485         prompt "SmartMIPS or microMIPS ASE support"
2486
2487 config CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS
2488         bool "None"
2489         help
2490           Select this if you want neither microMIPS nor SmartMIPS support
2491
2492 config CPU_HAS_SMARTMIPS
2493         depends on SYS_SUPPORTS_SMARTMIPS
2494         bool "SmartMIPS"
2495         help
2496           SmartMIPS is a extension of the MIPS32 architecture aimed at
2497           increased security at both hardware and software level for
2498           smartcards.  Enabling this option will allow proper use of the
2499           SmartMIPS instructions by Linux applications.  However a kernel with
2500           this option will not work on a MIPS core without SmartMIPS core.  If
2501           you don't know you probably don't have SmartMIPS and should say N
2502           here.
2503
2504 config CPU_MICROMIPS
2505         depends on 32BIT && SYS_SUPPORTS_MICROMIPS && !CPU_MIPSR6
2506         bool "microMIPS"
2507         help
2508           When this option is enabled the kernel will be built using the
2509           microMIPS ISA
2510
2511 endchoice
2512
2513 config CPU_HAS_MSA
2514         bool "Support for the MIPS SIMD Architecture"
2515         depends on CPU_SUPPORTS_MSA
2516         depends on MIPS_FP_SUPPORT
2517         depends on 64BIT || MIPS_O32_FP64_SUPPORT
2518         help
2519           MIPS SIMD Architecture (MSA) introduces 128 bit wide vector registers
2520           and a set of SIMD instructions to operate on them. When this option
2521           is enabled the kernel will support allocating & switching MSA
2522           vector register contexts. If you know that your kernel will only be
2523           running on CPUs which do not support MSA or that your userland will
2524           not be making use of it then you may wish to say N here to reduce
2525           the size & complexity of your kernel.
2526
2527           If unsure, say Y.
2528
2529 config CPU_HAS_WB
2530         bool
2531
2532 config XKS01
2533         bool
2534
2535 config CPU_HAS_RIXI
2536         bool
2537
2538 config CPU_HAS_LOAD_STORE_LR
2539         bool
2540         help
2541           CPU has support for unaligned load and store instructions:
2542           LWL, LWR, SWL, SWR (Load/store word left/right).
2543           LDL, LDR, SDL, SDR (Load/store doubleword left/right, for 64bit systems).
2544
2545 #
2546 # Vectored interrupt mode is an R2 feature
2547 #
2548 config CPU_MIPSR2_IRQ_VI
2549         bool
2550
2551 #
2552 # Extended interrupt mode is an R2 feature
2553 #
2554 config CPU_MIPSR2_IRQ_EI
2555         bool
2556
2557 config CPU_HAS_SYNC
2558         bool
2559         depends on !CPU_R3000
2560         default y
2561
2562 #
2563 # CPU non-features
2564 #
2565 config CPU_DADDI_WORKAROUNDS
2566         bool
2567
2568 config CPU_R4000_WORKAROUNDS
2569         bool
2570         select CPU_R4400_WORKAROUNDS
2571
2572 config CPU_R4400_WORKAROUNDS
2573         bool
2574
2575 config MIPS_ASID_SHIFT
2576         int
2577         default 6 if CPU_R3000 || CPU_TX39XX
2578         default 4 if CPU_R8000
2579         default 0
2580
2581 config MIPS_ASID_BITS
2582         int
2583         default 0 if MIPS_ASID_BITS_VARIABLE
2584         default 6 if CPU_R3000 || CPU_TX39XX
2585         default 8
2586
2587 config MIPS_ASID_BITS_VARIABLE
2588         bool
2589
2590 config MIPS_CRC_SUPPORT
2591         bool
2592
2593 #
2594 # - Highmem only makes sense for the 32-bit kernel.
2595 # - The current highmem code will only work properly on physically indexed
2596 #   caches such as R3000, SB1, R7000 or those that look like they're virtually
2597 #   indexed such as R4000/R4400 SC and MC versions or R10000.  So for the
2598 #   moment we protect the user and offer the highmem option only on machines
2599 #   where it's known to be safe.  This will not offer highmem on a few systems
2600 #   such as MIPS32 and MIPS64 CPUs which may have virtual and physically
2601 #   indexed CPUs but we're playing safe.
2602 # - We use SYS_SUPPORTS_HIGHMEM to offer highmem only for systems where we
2603 #   know they might have memory configurations that could make use of highmem
2604 #   support.
2605 #
2606 config HIGHMEM
2607         bool "High Memory Support"
2608         depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM && !CPU_MIPS32_3_5_EVA
2609
2610 config CPU_SUPPORTS_HIGHMEM
2611         bool
2612
2613 config SYS_SUPPORTS_HIGHMEM
2614         bool
2615
2616 config SYS_SUPPORTS_SMARTMIPS
2617         bool
2618
2619 config SYS_SUPPORTS_MICROMIPS
2620         bool
2621
2622 config SYS_SUPPORTS_MIPS16
2623         bool
2624         help
2625           This option must be set if a kernel might be executed on a MIPS16-
2626           enabled CPU even if MIPS16 is not actually being used.  In other
2627           words, it makes the kernel MIPS16-tolerant.
2628
2629 config CPU_SUPPORTS_MSA
2630         bool
2631
2632 config ARCH_FLATMEM_ENABLE
2633         def_bool y
2634         depends on !NUMA && !CPU_LOONGSON2
2635
2636 config ARCH_DISCONTIGMEM_ENABLE
2637         bool
2638         default y if SGI_IP27
2639         help
2640           Say Y to support efficient handling of discontiguous physical memory,
2641           for architectures which are either NUMA (Non-Uniform Memory Access)
2642           or have huge holes in the physical address space for other reasons.
2643           See <file:Documentation/vm/numa.rst> for more.
2644
2645 config ARCH_SPARSEMEM_ENABLE
2646         bool
2647         select SPARSEMEM_STATIC
2648
2649 config NUMA
2650         bool "NUMA Support"
2651         depends on SYS_SUPPORTS_NUMA
2652         help
2653           Say Y to compile the kernel to support NUMA (Non-Uniform Memory
2654           Access).  This option improves performance on systems with more
2655           than two nodes; on two node systems it is generally better to
2656           leave it disabled; on single node systems disable this option
2657           disabled.
2658
2659 config SYS_SUPPORTS_NUMA
2660         bool
2661
2662 config RELOCATABLE
2663         bool "Relocatable kernel"
2664         depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC)
2665         help
2666           This builds a kernel image that retains relocation information
2667           so it can be loaded someplace besides the default 1MB.
2668           The relocations make the kernel binary about 15% larger,
2669           but are discarded at runtime
2670
2671 config RELOCATION_TABLE_SIZE
2672         hex "Relocation table size"
2673         depends on RELOCATABLE
2674         range 0x0 0x01000000
2675         default "0x00100000"
2676         ---help---
2677           A table of relocation data will be appended to the kernel binary
2678           and parsed at boot to fix up the relocated kernel.
2679
2680           This option allows the amount of space reserved for the table to be
2681           adjusted, although the default of 1Mb should be ok in most cases.
2682
2683           The build will fail and a valid size suggested if this is too small.
2684
2685           If unsure, leave at the default value.
2686
2687 config RANDOMIZE_BASE
2688         bool "Randomize the address of the kernel image"
2689         depends on RELOCATABLE
2690         ---help---
2691            Randomizes the physical and virtual address at which the
2692            kernel image is loaded, as a security feature that
2693            deters exploit attempts relying on knowledge of the location
2694            of kernel internals.
2695
2696            Entropy is generated using any coprocessor 0 registers available.
2697
2698            The kernel will be offset by up to RANDOMIZE_BASE_MAX_OFFSET.
2699
2700            If unsure, say N.
2701
2702 config RANDOMIZE_BASE_MAX_OFFSET
2703         hex "Maximum kASLR offset" if EXPERT
2704         depends on RANDOMIZE_BASE
2705         range 0x0 0x40000000 if EVA || 64BIT
2706         range 0x0 0x08000000
2707         default "0x01000000"
2708         ---help---
2709           When kASLR is active, this provides the maximum offset that will
2710           be applied to the kernel image. It should be set according to the
2711           amount of physical RAM available in the target system minus
2712           PHYSICAL_START and must be a power of 2.
2713
2714           This is limited by the size of KSEG0, 256Mb on 32-bit or 1Gb with
2715           EVA or 64-bit. The default is 16Mb.
2716
2717 config NODES_SHIFT
2718         int
2719         default "6"
2720         depends on NEED_MULTIPLE_NODES
2721
2722 config HW_PERF_EVENTS
2723         bool "Enable hardware performance counter support for perf events"
2724         depends on PERF_EVENTS && !OPROFILE && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON3)
2725         default y
2726         help
2727           Enable hardware performance counter support for perf events. If
2728           disabled, perf events will use software events only.
2729
2730 config SMP
2731         bool "Multi-Processing support"
2732         depends on SYS_SUPPORTS_SMP
2733         help
2734           This enables support for systems with more than one CPU. If you have
2735           a system with only one CPU, say N. If you have a system with more
2736           than one CPU, say Y.
2737
2738           If you say N here, the kernel will run on uni- and multiprocessor
2739           machines, but will use only one CPU of a multiprocessor machine. If
2740           you say Y here, the kernel will run on many, but not all,
2741           uniprocessor machines. On a uniprocessor machine, the kernel
2742           will run faster if you say N here.
2743
2744           People using multiprocessor machines who say Y here should also say
2745           Y to "Enhanced Real Time Clock Support", below.
2746
2747           See also the SMP-HOWTO available at
2748           <http://www.tldp.org/docs.html#howto>.
2749
2750           If you don't know what to do here, say N.
2751
2752 config HOTPLUG_CPU
2753         bool "Support for hot-pluggable CPUs"
2754         depends on SMP && SYS_SUPPORTS_HOTPLUG_CPU
2755         help
2756           Say Y here to allow turning CPUs off and on. CPUs can be
2757           controlled through /sys/devices/system/cpu.
2758           (Note: power management support will enable this option
2759             automatically on SMP systems. )
2760           Say N if you want to disable CPU hotplug.
2761
2762 config SMP_UP
2763         bool
2764
2765 config SYS_SUPPORTS_MIPS_CMP
2766         bool
2767
2768 config SYS_SUPPORTS_MIPS_CPS
2769         bool
2770
2771 config SYS_SUPPORTS_SMP
2772         bool
2773
2774 config NR_CPUS_DEFAULT_4
2775         bool
2776
2777 config NR_CPUS_DEFAULT_8
2778         bool
2779
2780 config NR_CPUS_DEFAULT_16
2781         bool
2782
2783 config NR_CPUS_DEFAULT_32
2784         bool
2785
2786 config NR_CPUS_DEFAULT_64
2787         bool
2788
2789 config NR_CPUS
2790         int "Maximum number of CPUs (2-256)"
2791         range 2 256
2792         depends on SMP
2793         default "4" if NR_CPUS_DEFAULT_4
2794         default "8" if NR_CPUS_DEFAULT_8
2795         default "16" if NR_CPUS_DEFAULT_16
2796         default "32" if NR_CPUS_DEFAULT_32
2797         default "64" if NR_CPUS_DEFAULT_64
2798         help
2799           This allows you to specify the maximum number of CPUs which this
2800           kernel will support.  The maximum supported value is 32 for 32-bit
2801           kernel and 64 for 64-bit kernels; the minimum value which makes
2802           sense is 1 for Qemu (useful only for kernel debugging purposes)
2803           and 2 for all others.
2804
2805           This is purely to save memory - each supported CPU adds
2806           approximately eight kilobytes to the kernel image.  For best
2807           performance should round up your number of processors to the next
2808           power of two.
2809
2810 config MIPS_PERF_SHARED_TC_COUNTERS
2811         bool
2812
2813 config MIPS_NR_CPU_NR_MAP_1024
2814         bool
2815
2816 config MIPS_NR_CPU_NR_MAP
2817         int
2818         depends on SMP
2819         default 1024 if MIPS_NR_CPU_NR_MAP_1024
2820         default NR_CPUS if !MIPS_NR_CPU_NR_MAP_1024
2821
2822 #
2823 # Timer Interrupt Frequency Configuration
2824 #
2825
2826 choice
2827         prompt "Timer frequency"
2828         default HZ_250
2829         help
2830          Allows the configuration of the timer frequency.
2831
2832         config HZ_24
2833                 bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ
2834
2835         config HZ_48
2836                 bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ
2837
2838         config HZ_100
2839                 bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ
2840
2841         config HZ_128
2842                 bool "128 HZ" if SYS_SUPPORTS_128HZ || SYS_SUPPORTS_ARBIT_HZ
2843
2844         config HZ_250
2845                 bool "250 HZ" if SYS_SUPPORTS_250HZ || SYS_SUPPORTS_ARBIT_HZ
2846
2847         config HZ_256
2848                 bool "256 HZ" if SYS_SUPPORTS_256HZ || SYS_SUPPORTS_ARBIT_HZ
2849
2850         config HZ_1000
2851                 bool "1000 HZ" if SYS_SUPPORTS_1000HZ || SYS_SUPPORTS_ARBIT_HZ
2852
2853         config HZ_1024
2854                 bool "1024 HZ" if SYS_SUPPORTS_1024HZ || SYS_SUPPORTS_ARBIT_HZ
2855
2856 endchoice
2857
2858 config SYS_SUPPORTS_24HZ
2859         bool
2860
2861 config SYS_SUPPORTS_48HZ
2862         bool
2863
2864 config SYS_SUPPORTS_100HZ
2865         bool
2866
2867 config SYS_SUPPORTS_128HZ
2868         bool
2869
2870 config SYS_SUPPORTS_250HZ
2871         bool
2872
2873 config SYS_SUPPORTS_256HZ
2874         bool
2875
2876 config SYS_SUPPORTS_1000HZ
2877         bool
2878
2879 config SYS_SUPPORTS_1024HZ
2880         bool
2881
2882 config SYS_SUPPORTS_ARBIT_HZ
2883         bool
2884         default y if !SYS_SUPPORTS_24HZ && \
2885                      !SYS_SUPPORTS_48HZ && \
2886                      !SYS_SUPPORTS_100HZ && \
2887                      !SYS_SUPPORTS_128HZ && \
2888                      !SYS_SUPPORTS_250HZ && \
2889                      !SYS_SUPPORTS_256HZ && \
2890                      !SYS_SUPPORTS_1000HZ && \
2891                      !SYS_SUPPORTS_1024HZ
2892
2893 config HZ
2894         int
2895         default 24 if HZ_24
2896         default 48 if HZ_48
2897         default 100 if HZ_100
2898         default 128 if HZ_128
2899         default 250 if HZ_250
2900         default 256 if HZ_256
2901         default 1000 if HZ_1000
2902         default 1024 if HZ_1024
2903
2904 config SCHED_HRTICK
2905         def_bool HIGH_RES_TIMERS
2906
2907 config KEXEC
2908         bool "Kexec system call"
2909         select KEXEC_CORE
2910         help
2911           kexec is a system call that implements the ability to shutdown your
2912           current kernel, and to start another kernel.  It is like a reboot
2913           but it is independent of the system firmware.   And like a reboot
2914           you can start any kernel with it, not just Linux.
2915
2916           The name comes from the similarity to the exec system call.
2917
2918           It is an ongoing process to be certain the hardware in a machine
2919           is properly shutdown, so do not be surprised if this code does not
2920           initially work for you.  As of this writing the exact hardware
2921           interface is strongly in flux, so no good recommendation can be
2922           made.
2923
2924 config CRASH_DUMP
2925         bool "Kernel crash dumps"
2926         help
2927           Generate crash dump after being started by kexec.
2928           This should be normally only set in special crash dump kernels
2929           which are loaded in the main kernel with kexec-tools into
2930           a specially reserved region and then later executed after
2931           a crash by kdump/kexec. The crash dump kernel must be compiled
2932           to a memory address not used by the main kernel or firmware using
2933           PHYSICAL_START.
2934
2935 config PHYSICAL_START
2936         hex "Physical address where the kernel is loaded"
2937         default "0xffffffff84000000"
2938         depends on CRASH_DUMP
2939         help
2940           This gives the CKSEG0 or KSEG0 address where the kernel is loaded.
2941           If you plan to use kernel for capturing the crash dump change
2942           this value to start of the reserved region (the "X" value as
2943           specified in the "crashkernel=YM@XM" command line boot parameter
2944           passed to the panic-ed kernel).
2945
2946 config SECCOMP
2947         bool "Enable seccomp to safely compute untrusted bytecode"
2948         depends on PROC_FS
2949         default y
2950         help
2951           This kernel feature is useful for number crunching applications
2952           that may need to compute untrusted bytecode during their
2953           execution. By using pipes or other transports made available to
2954           the process as file descriptors supporting the read/write
2955           syscalls, it's possible to isolate those applications in
2956           their own address space using seccomp. Once seccomp is
2957           enabled via /proc/<pid>/seccomp, it cannot be disabled
2958           and the task is only allowed to execute a few safe syscalls
2959           defined by each seccomp mode.
2960
2961           If unsure, say Y. Only embedded should say N here.
2962
2963 config MIPS_O32_FP64_SUPPORT
2964         bool "Support for O32 binaries using 64-bit FP" if !CPU_MIPSR6
2965         depends on 32BIT || MIPS32_O32
2966         help
2967           When this is enabled, the kernel will support use of 64-bit floating
2968           point registers with binaries using the O32 ABI along with the
2969           EF_MIPS_FP64 ELF header flag (typically built with -mfp64). On
2970           32-bit MIPS systems this support is at the cost of increasing the
2971           size and complexity of the compiled FPU emulator. Thus if you are
2972           running a MIPS32 system and know that none of your userland binaries
2973           will require 64-bit floating point, you may wish to reduce the size
2974           of your kernel & potentially improve FP emulation performance by
2975           saying N here.
2976
2977           Although binutils currently supports use of this flag the details
2978           concerning its effect upon the O32 ABI in userland are still being
2979           worked on. In order to avoid userland becoming dependant upon current
2980           behaviour before the details have been finalised, this option should
2981           be considered experimental and only enabled by those working upon
2982           said details.
2983
2984           If unsure, say N.
2985
2986 config USE_OF
2987         bool
2988         select OF
2989         select OF_EARLY_FLATTREE
2990         select IRQ_DOMAIN
2991
2992 config UHI_BOOT
2993         bool
2994
2995 config BUILTIN_DTB
2996         bool
2997
2998 choice
2999         prompt "Kernel appended dtb support" if USE_OF
3000         default MIPS_NO_APPENDED_DTB
3001
3002         config MIPS_NO_APPENDED_DTB
3003                 bool "None"
3004                 help
3005                   Do not enable appended dtb support.
3006
3007         config MIPS_ELF_APPENDED_DTB
3008                 bool "vmlinux"
3009                 help
3010                   With this option, the boot code will look for a device tree binary
3011                   DTB) included in the vmlinux ELF section .appended_dtb. By default
3012                   it is empty and the DTB can be appended using binutils command
3013                   objcopy:
3014
3015                     objcopy --update-section .appended_dtb=<filename>.dtb vmlinux
3016
3017                   This is meant as a backward compatiblity convenience for those
3018                   systems with a bootloader that can't be upgraded to accommodate
3019                   the documented boot protocol using a device tree.
3020
3021         config MIPS_RAW_APPENDED_DTB
3022                 bool "vmlinux.bin or vmlinuz.bin"
3023                 help
3024                   With this option, the boot code will look for a device tree binary
3025                   DTB) appended to raw vmlinux.bin or vmlinuz.bin.
3026                   (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb).
3027
3028                   This is meant as a backward compatibility convenience for those
3029                   systems with a bootloader that can't be upgraded to accommodate
3030                   the documented boot protocol using a device tree.
3031
3032                   Beware that there is very little in terms of protection against
3033                   this option being confused by leftover garbage in memory that might
3034                   look like a DTB header after a reboot if no actual DTB is appended
3035                   to vmlinux.bin.  Do not leave this option active in a production kernel
3036                   if you don't intend to always append a DTB.
3037 endchoice
3038
3039 choice
3040         prompt "Kernel command line type" if !CMDLINE_OVERRIDE
3041         default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
3042                                          !MIPS_MALTA && \
3043                                          !CAVIUM_OCTEON_SOC
3044         default MIPS_CMDLINE_FROM_BOOTLOADER
3045
3046         config MIPS_CMDLINE_FROM_DTB
3047                 depends on USE_OF
3048                 bool "Dtb kernel arguments if available"
3049
3050         config MIPS_CMDLINE_DTB_EXTEND
3051                 depends on USE_OF
3052                 bool "Extend dtb kernel arguments with bootloader arguments"
3053
3054         config MIPS_CMDLINE_FROM_BOOTLOADER
3055                 bool "Bootloader kernel arguments if available"
3056
3057         config MIPS_CMDLINE_BUILTIN_EXTEND
3058                 depends on CMDLINE_BOOL
3059                 bool "Extend builtin kernel arguments with bootloader arguments"
3060 endchoice
3061
3062 endmenu
3063
3064 config LOCKDEP_SUPPORT
3065         bool
3066         default y
3067
3068 config STACKTRACE_SUPPORT
3069         bool
3070         default y
3071
3072 config HAVE_LATENCYTOP_SUPPORT
3073         bool
3074         default y
3075
3076 config PGTABLE_LEVELS
3077         int
3078         default 4 if PAGE_SIZE_4KB && MIPS_VA_BITS_48
3079         default 3 if 64BIT && !PAGE_SIZE_64KB
3080         default 2
3081
3082 config MIPS_AUTO_PFN_OFFSET
3083         bool
3084
3085 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
3086
3087 config PCI_DRIVERS_GENERIC
3088         select PCI_DOMAINS_GENERIC if PCI
3089         bool
3090
3091 config PCI_DRIVERS_LEGACY
3092         def_bool !PCI_DRIVERS_GENERIC
3093         select NO_GENERIC_PCI_IOPORT_MAP
3094         select PCI_DOMAINS if PCI
3095
3096 #
3097 # ISA support is now enabled via select.  Too many systems still have the one
3098 # or other ISA chip on the board that users don't know about so don't expect
3099 # users to choose the right thing ...
3100 #
3101 config ISA
3102         bool
3103
3104 config TC
3105         bool "TURBOchannel support"
3106         depends on MACH_DECSTATION
3107         help
3108           TURBOchannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
3109           processors.  TURBOchannel programming specifications are available
3110           at:
3111           <ftp://ftp.hp.com/pub/alphaserver/archive/triadd/>
3112           and:
3113           <http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/>
3114           Linux driver support status is documented at:
3115           <http://www.linux-mips.org/wiki/DECstation>
3116
3117 config MMU
3118         bool
3119         default y
3120
3121 config ARCH_MMAP_RND_BITS_MIN
3122         default 12 if 64BIT
3123         default 8
3124
3125 config ARCH_MMAP_RND_BITS_MAX
3126         default 18 if 64BIT
3127         default 15
3128
3129 config ARCH_MMAP_RND_COMPAT_BITS_MIN
3130        default 8
3131
3132 config ARCH_MMAP_RND_COMPAT_BITS_MAX
3133        default 15
3134
3135 config I8253
3136         bool
3137         select CLKSRC_I8253
3138         select CLKEVT_I8253
3139         select MIPS_EXTERNAL_TIMER
3140
3141 config ZONE_DMA
3142         bool
3143
3144 config ZONE_DMA32
3145         bool
3146
3147 endmenu
3148
3149 config TRAD_SIGNALS
3150         bool
3151
3152 config MIPS32_COMPAT
3153         bool
3154
3155 config COMPAT
3156         bool
3157
3158 config SYSVIPC_COMPAT
3159         bool
3160
3161 config MIPS32_O32
3162         bool "Kernel support for o32 binaries"
3163         depends on 64BIT
3164         select ARCH_WANT_OLD_COMPAT_IPC
3165         select COMPAT
3166         select MIPS32_COMPAT
3167         select SYSVIPC_COMPAT if SYSVIPC
3168         help
3169           Select this option if you want to run o32 binaries.  These are pure
3170           32-bit binaries as used by the 32-bit Linux/MIPS port.  Most of
3171           existing binaries are in this format.
3172
3173           If unsure, say Y.
3174
3175 config MIPS32_N32
3176         bool "Kernel support for n32 binaries"
3177         depends on 64BIT
3178         select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
3179         select COMPAT
3180         select MIPS32_COMPAT
3181         select SYSVIPC_COMPAT if SYSVIPC
3182         help
3183           Select this option if you want to run n32 binaries.  These are
3184           64-bit binaries using 32-bit quantities for addressing and certain
3185           data that would normally be 64-bit.  They are used in special
3186           cases.
3187
3188           If unsure, say N.
3189
3190 config BINFMT_ELF32
3191         bool
3192         default y if MIPS32_O32 || MIPS32_N32
3193         select ELFCORE
3194
3195 menu "Power management options"
3196
3197 config ARCH_HIBERNATION_POSSIBLE
3198         def_bool y
3199         depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
3200
3201 config ARCH_SUSPEND_POSSIBLE
3202         def_bool y
3203         depends on SYS_SUPPORTS_HOTPLUG_CPU || !SMP
3204
3205 source "kernel/power/Kconfig"
3206
3207 endmenu
3208
3209 config MIPS_EXTERNAL_TIMER
3210         bool
3211
3212 menu "CPU Power Management"
3213
3214 if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
3215 source "drivers/cpufreq/Kconfig"
3216 endif
3217
3218 source "drivers/cpuidle/Kconfig"
3219
3220 endmenu
3221
3222 source "drivers/firmware/Kconfig"
3223
3224 source "arch/mips/kvm/Kconfig"
This page took 0.244968 seconds and 4 git commands to generate.