drivers/staging/greybus/spilib.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Greybus SPI library
   4  *
   5  * Copyright 2014-2016 Google Inc.
   6  * Copyright 2014-2016 Linaro Ltd.
   7  */
   8
   9 #include <linux/bitops.h>
  10 #include <linux/kernel.h>
  11 #include <linux/module.h>
  12 #include <linux/slab.h>
  13 #include <linux/greybus.h>
  14 #include <linux/spi/spi.h>
  15
  16 #include "spilib.h"
  17
  18 struct gb_spilib {
  19         struct gb_connection    *connection;
  20         struct device           *parent;
  21         struct spi_transfer     *first_xfer;
  22         struct spi_transfer     *last_xfer;
  23         struct spilib_ops       *ops;
  24         u32                     rx_xfer_offset;
  25         u32                     tx_xfer_offset;
  26         u32                     last_xfer_size;
  27         unsigned int            op_timeout;
  28         u16                     mode;
  29         u16                     flags;
  30         u32                     bits_per_word_mask;
  31         u8                      num_chipselect;
  32         u32                     min_speed_hz;
  33         u32                     max_speed_hz;
  34 };
  35
  36 #define GB_SPI_STATE_MSG_DONE           ((void *)0)
  37 #define GB_SPI_STATE_MSG_IDLE           ((void *)1)
  38 #define GB_SPI_STATE_MSG_RUNNING        ((void *)2)
  39 #define GB_SPI_STATE_OP_READY           ((void *)3)
  40 #define GB_SPI_STATE_OP_DONE            ((void *)4)
  41 #define GB_SPI_STATE_MSG_ERROR          ((void *)-1)
  42
  43 #define XFER_TIMEOUT_TOLERANCE          200
  44
  45 static struct spi_controller *get_controller_from_spi(struct gb_spilib *spi)
  46 {
  47         return gb_connection_get_data(spi->connection);
  48 }
  49
  50 static int tx_header_fit_operation(u32 tx_size, u32 count, size_t data_max)
  51 {
  52         size_t headers_size;
  53
  54         data_max -= sizeof(struct gb_spi_transfer_request);
  55         headers_size = (count + 1) * sizeof(struct gb_spi_transfer);
  56
  57         return tx_size + headers_size > data_max ? 0 : 1;
  58 }
  59
  60 static size_t calc_rx_xfer_size(u32 rx_size, u32 *tx_xfer_size, u32 len,
  61                                 size_t data_max)
  62 {
  63         size_t rx_xfer_size;
  64
  65         data_max -= sizeof(struct gb_spi_transfer_response);
  66
  67         if (rx_size + len > data_max)
  68                 rx_xfer_size = data_max - rx_size;
  69         else
  70                 rx_xfer_size = len;
  71
  72         /* if this is a write_read, for symmetry read the same as write */
  73         if (*tx_xfer_size && rx_xfer_size > *tx_xfer_size)
  74                 rx_xfer_size = *tx_xfer_size;
  75         if (*tx_xfer_size && rx_xfer_size < *tx_xfer_size)
  76                 *tx_xfer_size = rx_xfer_size;
  77
  78         return rx_xfer_size;
  79 }
  80
  81 static size_t calc_tx_xfer_size(u32 tx_size, u32 count, size_t len,
  82                                 size_t data_max)
  83 {
  84         size_t headers_size;
  85
  86         data_max -= sizeof(struct gb_spi_transfer_request);
  87         headers_size = (count + 1) * sizeof(struct gb_spi_transfer);
  88
  89         if (tx_size + headers_size + len > data_max)
  90                 return data_max - (tx_size + sizeof(struct gb_spi_transfer));
  91
  92         return len;
  93 }
  94
  95 static void clean_xfer_state(struct gb_spilib *spi)
  96 {
  97         spi->first_xfer = NULL;
  98         spi->last_xfer = NULL;
  99         spi->rx_xfer_offset = 0;
 100         spi->tx_xfer_offset = 0;
 101         spi->last_xfer_size = 0;
 102         spi->op_timeout = 0;
 103 }
 104
 105 static bool is_last_xfer_done(struct gb_spilib *spi)
 106 {
 107         struct spi_transfer *last_xfer = spi->last_xfer;
 108
 109         if ((spi->tx_xfer_offset + spi->last_xfer_size == last_xfer->len) ||
 110             (spi->rx_xfer_offset + spi->last_xfer_size == last_xfer->len))
 111                 return true;
 112
 113         return false;
 114 }
 115
 116 static int setup_next_xfer(struct gb_spilib *spi, struct spi_message *msg)
 117 {
 118         struct spi_transfer *last_xfer = spi->last_xfer;
 119
 120         if (msg->state != GB_SPI_STATE_OP_DONE)
 121                 return 0;
 122
 123         /*
 124          * if we transferred all content of the last transfer, reset values and
 125          * check if this was the last transfer in the message
 126          */
 127         if (is_last_xfer_done(spi)) {
 128                 spi->tx_xfer_offset = 0;
 129                 spi->rx_xfer_offset = 0;
 130                 spi->op_timeout = 0;
 131                 if (last_xfer == list_last_entry(&msg->transfers,
 132                                                  struct spi_transfer,
 133                                                  transfer_list))
 134                         msg->state = GB_SPI_STATE_MSG_DONE;
 135                 else
 136                         spi->first_xfer = list_next_entry(last_xfer,
 137                                                           transfer_list);
 138                 return 0;
 139         }
 140
 141         spi->first_xfer = last_xfer;
 142         if (last_xfer->tx_buf)
 143                 spi->tx_xfer_offset += spi->last_xfer_size;
 144
 145         if (last_xfer->rx_buf)
 146                 spi->rx_xfer_offset += spi->last_xfer_size;
 147
 148         return 0;
 149 }
 150
 151 static struct spi_transfer *get_next_xfer(struct spi_transfer *xfer,
 152                                           struct spi_message *msg)
 153 {
 154         if (xfer == list_last_entry(&msg->transfers, struct spi_transfer,
 155                                     transfer_list))
 156                 return NULL;
 157
 158         return list_next_entry(xfer, transfer_list);
 159 }
 160
 161 /* Routines to transfer data */
 162 static struct gb_operation *gb_spi_operation_create(struct gb_spilib *spi,
 163                 struct gb_connection *connection, struct spi_message *msg)
 164 {
 165         struct gb_spi_transfer_request *request;
 166         struct spi_device *dev = msg->spi;
 167         struct spi_transfer *xfer;
 168         struct gb_spi_transfer *gb_xfer;
 169         struct gb_operation *operation;
 170         u32 tx_size = 0, rx_size = 0, count = 0, xfer_len = 0, request_size;
 171         u32 tx_xfer_size = 0, rx_xfer_size = 0, len;
 172         u32 total_len = 0;
 173         unsigned int xfer_timeout;
 174         size_t data_max;
 175         void *tx_data;
 176
 177         data_max = gb_operation_get_payload_size_max(connection);
 178         xfer = spi->first_xfer;
 179
 180         /* Find number of transfers queued and tx/rx length in the message */
 181
 182         while (msg->state != GB_SPI_STATE_OP_READY) {
 183                 msg->state = GB_SPI_STATE_MSG_RUNNING;
 184                 spi->last_xfer = xfer;
 185
 186                 if (!xfer->tx_buf && !xfer->rx_buf) {
 187                         dev_err(spi->parent,
 188                                 "bufferless transfer, length %u\n", xfer->len);
 189                         msg->state = GB_SPI_STATE_MSG_ERROR;
 190                         return NULL;
 191                 }
 192
 193                 tx_xfer_size = 0;
 194                 rx_xfer_size = 0;
 195
 196                 if (xfer->tx_buf) {
 197                         len = xfer->len - spi->tx_xfer_offset;
 198                         if (!tx_header_fit_operation(tx_size, count, data_max))
 199                                 break;
 200                         tx_xfer_size = calc_tx_xfer_size(tx_size, count,
 201                                                          len, data_max);
 202                         spi->last_xfer_size = tx_xfer_size;
 203                 }
 204
 205                 if (xfer->rx_buf) {
 206                         len = xfer->len - spi->rx_xfer_offset;
 207                         rx_xfer_size = calc_rx_xfer_size(rx_size, &tx_xfer_size,
 208                                                          len, data_max);
 209                         spi->last_xfer_size = rx_xfer_size;
 210                 }
 211
 212                 tx_size += tx_xfer_size;
 213                 rx_size += rx_xfer_size;
 214
 215                 total_len += spi->last_xfer_size;
 216                 count++;
 217
 218                 xfer = get_next_xfer(xfer, msg);
 219                 if (!xfer || total_len >= data_max)
 220                         msg->state = GB_SPI_STATE_OP_READY;
 221         }
 222
 223         /*
 224          * In addition to space for all message descriptors we need
 225          * to have enough to hold all tx data.
 226          */
 227         request_size = sizeof(*request);
 228         request_size += count * sizeof(*gb_xfer);
 229         request_size += tx_size;
 230
 231         /* Response consists only of incoming data */
 232         operation = gb_operation_create(connection, GB_SPI_TYPE_TRANSFER,
 233                                         request_size, rx_size, GFP_KERNEL);
 234         if (!operation)
 235                 return NULL;
 236
 237         request = operation->request->payload;
 238         request->count = cpu_to_le16(count);
 239         request->mode = dev->mode;
 240         request->chip_select = spi_get_chipselect(dev, 0);
 241
 242         gb_xfer = &request->transfers[0];
 243         tx_data = gb_xfer + count;      /* place tx data after last gb_xfer */
 244
 245         /* Fill in the transfers array */
 246         xfer = spi->first_xfer;
 247         while (msg->state != GB_SPI_STATE_OP_DONE) {
 248                 int xfer_delay;
 249
 250                 if (xfer == spi->last_xfer)
 251                         xfer_len = spi->last_xfer_size;
 252                 else
 253                         xfer_len = xfer->len;
 254
 255                 /* make sure we do not timeout in a slow transfer */
 256                 xfer_timeout = xfer_len * 8 * MSEC_PER_SEC / xfer->speed_hz;
 257                 xfer_timeout += GB_OPERATION_TIMEOUT_DEFAULT;
 258
 259                 if (xfer_timeout > spi->op_timeout)
 260                         spi->op_timeout = xfer_timeout;
 261
 262                 gb_xfer->speed_hz = cpu_to_le32(xfer->speed_hz);
 263                 gb_xfer->len = cpu_to_le32(xfer_len);
 264                 xfer_delay = spi_delay_to_ns(&xfer->delay, xfer) / 1000;
 265                 xfer_delay = clamp_t(u16, xfer_delay, 0, U16_MAX);
 266                 gb_xfer->delay_usecs = cpu_to_le16(xfer_delay);
 267                 gb_xfer->cs_change = xfer->cs_change;
 268                 gb_xfer->bits_per_word = xfer->bits_per_word;
 269
 270                 /* Copy tx data */
 271                 if (xfer->tx_buf) {
 272                         gb_xfer->xfer_flags |= GB_SPI_XFER_WRITE;
 273                         memcpy(tx_data, xfer->tx_buf + spi->tx_xfer_offset,
 274                                xfer_len);
 275                         tx_data += xfer_len;
 276                 }
 277
 278                 if (xfer->rx_buf)
 279                         gb_xfer->xfer_flags |= GB_SPI_XFER_READ;
 280
 281                 if (xfer == spi->last_xfer) {
 282                         if (!is_last_xfer_done(spi))
 283                                 gb_xfer->xfer_flags |= GB_SPI_XFER_INPROGRESS;
 284                         msg->state = GB_SPI_STATE_OP_DONE;
 285                         continue;
 286                 }
 287
 288                 gb_xfer++;
 289                 xfer = get_next_xfer(xfer, msg);
 290         }
 291
 292         msg->actual_length += total_len;
 293
 294         return operation;
 295 }
 296
 297 static void gb_spi_decode_response(struct gb_spilib *spi,
 298                                    struct spi_message *msg,
 299                                    struct gb_spi_transfer_response *response)
 300 {
 301         struct spi_transfer *xfer = spi->first_xfer;
 302         void *rx_data = response->data;
 303         u32 xfer_len;
 304
 305         while (xfer) {
 306                 /* Copy rx data */
 307                 if (xfer->rx_buf) {
 308                         if (xfer == spi->first_xfer)
 309                                 xfer_len = xfer->len - spi->rx_xfer_offset;
 310                         else if (xfer == spi->last_xfer)
 311                                 xfer_len = spi->last_xfer_size;
 312                         else
 313                                 xfer_len = xfer->len;
 314
 315                         memcpy(xfer->rx_buf + spi->rx_xfer_offset, rx_data,
 316                                xfer_len);
 317                         rx_data += xfer_len;
 318                 }
 319
 320                 if (xfer == spi->last_xfer)
 321                         break;
 322
 323                 xfer = list_next_entry(xfer, transfer_list);
 324         }
 325 }
 326
 327 static int gb_spi_transfer_one_message(struct spi_controller *ctlr,
 328                                        struct spi_message *msg)
 329 {
 330         struct gb_spilib *spi = spi_controller_get_devdata(ctlr);
 331         struct gb_connection *connection = spi->connection;
 332         struct gb_spi_transfer_response *response;
 333         struct gb_operation *operation;
 334         int ret = 0;
 335
 336         spi->first_xfer = list_first_entry_or_null(&msg->transfers,
 337                                                    struct spi_transfer,
 338                                                    transfer_list);
 339         if (!spi->first_xfer) {
 340                 ret = -ENOMEM;
 341                 goto out;
 342         }
 343
 344         msg->state = GB_SPI_STATE_MSG_IDLE;
 345
 346         while (msg->state != GB_SPI_STATE_MSG_DONE &&
 347                msg->state != GB_SPI_STATE_MSG_ERROR) {
 348                 operation = gb_spi_operation_create(spi, connection, msg);
 349                 if (!operation) {
 350                         msg->state = GB_SPI_STATE_MSG_ERROR;
 351                         ret = -EINVAL;
 352                         continue;
 353                 }
 354
 355                 ret = gb_operation_request_send_sync_timeout(operation,
 356                                                              spi->op_timeout);
 357                 if (!ret) {
 358                         response = operation->response->payload;
 359                         if (response)
 360                                 gb_spi_decode_response(spi, msg, response);
 361                 } else {
 362                         dev_err(spi->parent,
 363                                 "transfer operation failed: %d\n", ret);
 364                         msg->state = GB_SPI_STATE_MSG_ERROR;
 365                 }
 366
 367                 gb_operation_put(operation);
 368                 setup_next_xfer(spi, msg);
 369         }
 370
 371 out:
 372         msg->status = ret;
 373         clean_xfer_state(spi);
 374         spi_finalize_current_message(ctlr);
 375
 376         return ret;
 377 }
 378
 379 static int gb_spi_prepare_transfer_hardware(struct spi_controller *ctlr)
 380 {
 381         struct gb_spilib *spi = spi_controller_get_devdata(ctlr);
 382
 383         return spi->ops->prepare_transfer_hardware(spi->parent);
 384 }
 385
 386 static int gb_spi_unprepare_transfer_hardware(struct spi_controller *ctlr)
 387 {
 388         struct gb_spilib *spi = spi_controller_get_devdata(ctlr);
 389
 390         spi->ops->unprepare_transfer_hardware(spi->parent);
 391
 392         return 0;
 393 }
 394
 395 static int gb_spi_setup(struct spi_device *spi)
 396 {
 397         /* Nothing to do for now */
 398         return 0;
 399 }
 400
 401 static void gb_spi_cleanup(struct spi_device *spi)
 402 {
 403         /* Nothing to do for now */
 404 }
 405
 406 /* Routines to get controller information */
 407
 408 /*
 409  * Map Greybus spi mode bits/flags/bpw into Linux ones.
 410  * All bits are same for now and so these macro's return same values.
 411  */
 412 #define gb_spi_mode_map(mode) mode
 413 #define gb_spi_flags_map(flags) flags
 414
 415 static int gb_spi_get_master_config(struct gb_spilib *spi)
 416 {
 417         struct gb_spi_master_config_response response;
 418         u16 mode, flags;
 419         int ret;
 420
 421         ret = gb_operation_sync(spi->connection, GB_SPI_TYPE_MASTER_CONFIG,
 422                                 NULL, 0, &response, sizeof(response));
 423         if (ret < 0)
 424                 return ret;
 425
 426         mode = le16_to_cpu(response.mode);
 427         spi->mode = gb_spi_mode_map(mode);
 428
 429         flags = le16_to_cpu(response.flags);
 430         spi->flags = gb_spi_flags_map(flags);
 431
 432         spi->bits_per_word_mask = le32_to_cpu(response.bits_per_word_mask);
 433         spi->num_chipselect = response.num_chipselect;
 434
 435         spi->min_speed_hz = le32_to_cpu(response.min_speed_hz);
 436         spi->max_speed_hz = le32_to_cpu(response.max_speed_hz);
 437
 438         return 0;
 439 }
 440
 441 static int gb_spi_setup_device(struct gb_spilib *spi, u8 cs)
 442 {
 443         struct spi_controller *ctlr = get_controller_from_spi(spi);
 444         struct gb_spi_device_config_request request;
 445         struct gb_spi_device_config_response response;
 446         struct spi_board_info spi_board = { {0} };
 447         struct spi_device *spidev;
 448         int ret;
 449         u8 dev_type;
 450
 451         request.chip_select = cs;
 452
 453         ret = gb_operation_sync(spi->connection, GB_SPI_TYPE_DEVICE_CONFIG,
 454                                 &request, sizeof(request),
 455                                 &response, sizeof(response));
 456         if (ret < 0)
 457                 return ret;
 458
 459         dev_type = response.device_type;
 460
 461         if (dev_type == GB_SPI_SPI_DEV)
 462                 strscpy(spi_board.modalias, "spidev",
 463                         sizeof(spi_board.modalias));
 464         else if (dev_type == GB_SPI_SPI_NOR)
 465                 strscpy(spi_board.modalias, "spi-nor",
 466                         sizeof(spi_board.modalias));
 467         else if (dev_type == GB_SPI_SPI_MODALIAS)
 468                 memcpy(spi_board.modalias, response.name,
 469                        sizeof(spi_board.modalias));
 470         else
 471                 return -EINVAL;
 472
 473         spi_board.mode          = le16_to_cpu(response.mode);
 474         spi_board.bus_num       = ctlr->bus_num;
 475         spi_board.chip_select   = cs;
 476         spi_board.max_speed_hz  = le32_to_cpu(response.max_speed_hz);
 477
 478         spidev = spi_new_device(ctlr, &spi_board);
 479         if (!spidev)
 480                 return -EINVAL;
 481
 482         return 0;
 483 }
 484
 485 int gb_spilib_master_init(struct gb_connection *connection, struct device *dev,
 486                           struct spilib_ops *ops)
 487 {
 488         struct gb_spilib *spi;
 489         struct spi_controller *ctlr;
 490         int ret;
 491         u8 i;
 492
 493         /* Allocate host with space for data */
 494         ctlr = spi_alloc_host(dev, sizeof(*spi));
 495         if (!ctlr) {
 496                 dev_err(dev, "cannot alloc SPI host\n");
 497                 return -ENOMEM;
 498         }
 499
 500         spi = spi_controller_get_devdata(ctlr);
 501         spi->connection = connection;
 502         gb_connection_set_data(connection, ctlr);
 503         spi->parent = dev;
 504         spi->ops = ops;
 505
 506         /* get controller configuration */
 507         ret = gb_spi_get_master_config(spi);
 508         if (ret)
 509                 goto exit_spi_put;
 510
 511         ctlr->bus_num = -1; /* Allow spi-core to allocate it dynamically */
 512         ctlr->num_chipselect = spi->num_chipselect;
 513         ctlr->mode_bits = spi->mode;
 514         ctlr->flags = spi->flags;
 515         ctlr->bits_per_word_mask = spi->bits_per_word_mask;
 516
 517         /* Attach methods */
 518         ctlr->cleanup = gb_spi_cleanup;
 519         ctlr->setup = gb_spi_setup;
 520         ctlr->transfer_one_message = gb_spi_transfer_one_message;
 521
 522         if (ops && ops->prepare_transfer_hardware) {
 523                 ctlr->prepare_transfer_hardware =
 524                         gb_spi_prepare_transfer_hardware;
 525         }
 526
 527         if (ops && ops->unprepare_transfer_hardware) {
 528                 ctlr->unprepare_transfer_hardware =
 529                         gb_spi_unprepare_transfer_hardware;
 530         }
 531
 532         ctlr->auto_runtime_pm = true;
 533
 534         ret = spi_register_controller(ctlr);
 535         if (ret < 0)
 536                 goto exit_spi_put;
 537
 538         /* now, fetch the devices configuration */
 539         for (i = 0; i < spi->num_chipselect; i++) {
 540                 ret = gb_spi_setup_device(spi, i);
 541                 if (ret < 0) {
 542                         dev_err(dev, "failed to allocate spi device %d: %d\n",
 543                                 i, ret);
 544                         goto exit_spi_unregister;
 545                 }
 546         }
 547
 548         return 0;
 549
 550 exit_spi_put:
 551         spi_controller_put(ctlr);
 552
 553         return ret;
 554
 555 exit_spi_unregister:
 556         spi_unregister_controller(ctlr);
 557
 558         return ret;
 559 }
 560 EXPORT_SYMBOL_GPL(gb_spilib_master_init);
 561
 562 void gb_spilib_master_exit(struct gb_connection *connection)
 563 {
 564         struct spi_controller *ctlr = gb_connection_get_data(connection);
 565
 566         spi_unregister_controller(ctlr);
 567 }
 568 EXPORT_SYMBOL_GPL(gb_spilib_master_exit);
 569
 570 MODULE_DESCRIPTION("Greybus SPI library");
 571 MODULE_LICENSE("GPL v2");