]> Git Repo - linux.git/blob - drivers/net/wireless/mediatek/mt7601u/phy.c
Linux 6.14-rc3
[linux.git] / drivers / net / wireless / mediatek / mt7601u / phy.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * (c) Copyright 2002-2010, Ralink Technology, Inc.
4  * Copyright (C) 2014 Felix Fietkau <[email protected]>
5  * Copyright (C) 2015 Jakub Kicinski <[email protected]>
6  */
7
8 #include "mt7601u.h"
9 #include "mcu.h"
10 #include "eeprom.h"
11 #include "trace.h"
12 #include "initvals_phy.h"
13
14 #include <linux/etherdevice.h>
15
16 static void mt7601u_agc_reset(struct mt7601u_dev *dev);
17
18 static int
19 mt7601u_rf_wr(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 value)
20 {
21         int ret = 0;
22
23         if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
24             WARN_ON(offset > 63))
25                 return -EINVAL;
26         if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
27                 return 0;
28
29         mutex_lock(&dev->reg_atomic_mutex);
30
31         if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100)) {
32                 ret = -ETIMEDOUT;
33                 goto out;
34         }
35
36         mt7601u_wr(dev, MT_RF_CSR_CFG,
37                    FIELD_PREP(MT_RF_CSR_CFG_DATA, value) |
38                    FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) |
39                    FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) |
40                    MT_RF_CSR_CFG_WR |
41                    MT_RF_CSR_CFG_KICK);
42         trace_rf_write(dev, bank, offset, value);
43 out:
44         mutex_unlock(&dev->reg_atomic_mutex);
45
46         if (ret < 0)
47                 dev_err(dev->dev, "Error: RF write %02hhx:%02hhx failed:%d!!\n",
48                         bank, offset, ret);
49
50         return ret;
51 }
52
53 static int
54 mt7601u_rf_rr(struct mt7601u_dev *dev, u8 bank, u8 offset)
55 {
56         int ret = -ETIMEDOUT;
57         u32 val;
58
59         if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
60             WARN_ON(offset > 63))
61                 return -EINVAL;
62         if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
63                 return 0xff;
64
65         mutex_lock(&dev->reg_atomic_mutex);
66
67         if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
68                 goto out;
69
70         mt7601u_wr(dev, MT_RF_CSR_CFG,
71                    FIELD_PREP(MT_RF_CSR_CFG_REG_BANK, bank) |
72                    FIELD_PREP(MT_RF_CSR_CFG_REG_ID, offset) |
73                    MT_RF_CSR_CFG_KICK);
74
75         if (!mt76_poll(dev, MT_RF_CSR_CFG, MT_RF_CSR_CFG_KICK, 0, 100))
76                 goto out;
77
78         val = mt7601u_rr(dev, MT_RF_CSR_CFG);
79         if (FIELD_GET(MT_RF_CSR_CFG_REG_ID, val) == offset &&
80             FIELD_GET(MT_RF_CSR_CFG_REG_BANK, val) == bank) {
81                 ret = FIELD_GET(MT_RF_CSR_CFG_DATA, val);
82                 trace_rf_read(dev, bank, offset, ret);
83         }
84 out:
85         mutex_unlock(&dev->reg_atomic_mutex);
86
87         if (ret < 0)
88                 dev_err(dev->dev, "Error: RF read %02hhx:%02hhx failed:%d!!\n",
89                         bank, offset, ret);
90
91         return ret;
92 }
93
94 static int
95 mt7601u_rf_rmw(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask, u8 val)
96 {
97         int ret;
98
99         ret = mt7601u_rf_rr(dev, bank, offset);
100         if (ret < 0)
101                 return ret;
102         val |= ret & ~mask;
103         ret = mt7601u_rf_wr(dev, bank, offset, val);
104         if (ret)
105                 return ret;
106
107         return val;
108 }
109
110 static int
111 mt7601u_rf_set(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 val)
112 {
113         return mt7601u_rf_rmw(dev, bank, offset, 0, val);
114 }
115
116 static int
117 mt7601u_rf_clear(struct mt7601u_dev *dev, u8 bank, u8 offset, u8 mask)
118 {
119         return mt7601u_rf_rmw(dev, bank, offset, mask, 0);
120 }
121
122 static void mt7601u_bbp_wr(struct mt7601u_dev *dev, u8 offset, u8 val)
123 {
124         if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)) ||
125             test_bit(MT7601U_STATE_REMOVED, &dev->state))
126                 return;
127
128         mutex_lock(&dev->reg_atomic_mutex);
129
130         if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000)) {
131                 dev_err(dev->dev, "Error: BBP write %02hhx failed!!\n", offset);
132                 goto out;
133         }
134
135         mt7601u_wr(dev, MT_BBP_CSR_CFG,
136                    FIELD_PREP(MT_BBP_CSR_CFG_VAL, val) |
137                    FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) |
138                    MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY);
139         trace_bbp_write(dev, offset, val);
140 out:
141         mutex_unlock(&dev->reg_atomic_mutex);
142 }
143
144 static int mt7601u_bbp_rr(struct mt7601u_dev *dev, u8 offset)
145 {
146         u32 val;
147         int ret = -ETIMEDOUT;
148
149         if (WARN_ON(!test_bit(MT7601U_STATE_WLAN_RUNNING, &dev->state)))
150                 return -EINVAL;
151         if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
152                 return 0xff;
153
154         mutex_lock(&dev->reg_atomic_mutex);
155
156         if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000))
157                 goto out;
158
159         mt7601u_wr(dev, MT_BBP_CSR_CFG,
160                    FIELD_PREP(MT_BBP_CSR_CFG_REG_NUM, offset) |
161                    MT_BBP_CSR_CFG_RW_MODE | MT_BBP_CSR_CFG_BUSY |
162                    MT_BBP_CSR_CFG_READ);
163
164         if (!mt76_poll(dev, MT_BBP_CSR_CFG, MT_BBP_CSR_CFG_BUSY, 0, 1000))
165                 goto out;
166
167         val = mt7601u_rr(dev, MT_BBP_CSR_CFG);
168         if (FIELD_GET(MT_BBP_CSR_CFG_REG_NUM, val) == offset) {
169                 ret = FIELD_GET(MT_BBP_CSR_CFG_VAL, val);
170                 trace_bbp_read(dev, offset, ret);
171         }
172 out:
173         mutex_unlock(&dev->reg_atomic_mutex);
174
175         if (ret < 0)
176                 dev_err(dev->dev, "Error: BBP read %02hhx failed:%d!!\n",
177                         offset, ret);
178
179         return ret;
180 }
181
182 static int mt7601u_bbp_rmw(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val)
183 {
184         int ret;
185
186         ret = mt7601u_bbp_rr(dev, offset);
187         if (ret < 0)
188                 return ret;
189         val |= ret & ~mask;
190         mt7601u_bbp_wr(dev, offset, val);
191
192         return val;
193 }
194
195 static u8 mt7601u_bbp_rmc(struct mt7601u_dev *dev, u8 offset, u8 mask, u8 val)
196 {
197         int ret;
198
199         ret = mt7601u_bbp_rr(dev, offset);
200         if (ret < 0)
201                 return ret;
202         val |= ret & ~mask;
203         if (ret != val)
204                 mt7601u_bbp_wr(dev, offset, val);
205
206         return val;
207 }
208
209 int mt7601u_wait_bbp_ready(struct mt7601u_dev *dev)
210 {
211         int i = 20;
212         u8 val;
213
214         do {
215                 val = mt7601u_bbp_rr(dev, MT_BBP_REG_VERSION);
216                 if (val && val != 0xff)
217                         break;
218         } while (--i);
219
220         if (!i) {
221                 dev_err(dev->dev, "Error: BBP is not ready\n");
222                 return -EIO;
223         }
224
225         return 0;
226 }
227
228 u32 mt7601u_bbp_set_ctrlch(struct mt7601u_dev *dev, bool below)
229 {
230         return mt7601u_bbp_rmc(dev, 3, 0x20, below ? 0x20 : 0);
231 }
232
233 int mt7601u_phy_get_rssi(struct mt7601u_dev *dev,
234                          struct mt7601u_rxwi *rxwi, u16 rate)
235 {
236         static const s8 lna[2][2][3] = {
237                 /* main LNA */ {
238                         /* bw20 */ { -2, 15, 33 },
239                         /* bw40 */ {  0, 16, 34 }
240                 },
241                 /*  aux LNA */ {
242                         /* bw20 */ { -2, 15, 33 },
243                         /* bw40 */ { -2, 16, 34 }
244                 }
245         };
246         int bw = FIELD_GET(MT_RXWI_RATE_BW, rate);
247         int aux_lna = FIELD_GET(MT_RXWI_ANT_AUX_LNA, rxwi->ant);
248         int lna_id = FIELD_GET(MT_RXWI_GAIN_RSSI_LNA_ID, rxwi->gain);
249         int val;
250
251         if (lna_id) /* LNA id can be 0, 2, 3. */
252                 lna_id--;
253
254         val = 8;
255         val -= lna[aux_lna][bw][lna_id];
256         val -= FIELD_GET(MT_RXWI_GAIN_RSSI_VAL, rxwi->gain);
257         val -= dev->ee->lna_gain;
258         val -= dev->ee->rssi_offset[0];
259
260         return val;
261 }
262
263 static void mt7601u_vco_cal(struct mt7601u_dev *dev)
264 {
265         mt7601u_rf_wr(dev, 0, 4, 0x0a);
266         mt7601u_rf_wr(dev, 0, 5, 0x20);
267         mt7601u_rf_set(dev, 0, 4, BIT(7));
268         msleep(2);
269 }
270
271 static int mt7601u_set_bw_filter(struct mt7601u_dev *dev, bool cal)
272 {
273         u32 filter = 0;
274         int ret;
275
276         if (!cal)
277                 filter |= 0x10000;
278         if (dev->bw != MT_BW_20)
279                 filter |= 0x00100;
280
281         /* TX */
282         ret = mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter | 1);
283         if (ret)
284                 return ret;
285         /* RX */
286         return mt7601u_mcu_calibrate(dev, MCU_CAL_BW, filter);
287 }
288
289 static int mt7601u_load_bbp_temp_table_bw(struct mt7601u_dev *dev)
290 {
291         const struct reg_table *t;
292
293         if (WARN_ON(dev->temp_mode > MT_TEMP_MODE_LOW))
294                 return -EINVAL;
295
296         t = &bbp_mode_table[dev->temp_mode][dev->bw];
297
298         return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP, t->regs, t->n);
299 }
300
301 static int mt7601u_bbp_temp(struct mt7601u_dev *dev, int mode, const char *name)
302 {
303         const struct reg_table *t;
304         int ret;
305
306         if (dev->temp_mode == mode)
307                 return 0;
308
309         dev->temp_mode = mode;
310         trace_temp_mode(dev, mode);
311
312         t = bbp_mode_table[dev->temp_mode];
313         ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
314                                       t[2].regs, t[2].n);
315         if (ret)
316                 return ret;
317
318         return mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
319                                        t[dev->bw].regs, t[dev->bw].n);
320 }
321
322 static void mt7601u_apply_ch14_fixup(struct mt7601u_dev *dev, int hw_chan)
323 {
324         struct mt7601u_rate_power *t = &dev->ee->power_rate_table;
325
326         if (hw_chan != 14 || dev->bw != MT_BW_20) {
327                 mt7601u_bbp_rmw(dev, 4, 0x20, 0);
328                 mt7601u_bbp_wr(dev, 178, 0xff);
329
330                 t->cck[0].bw20 = dev->ee->real_cck_bw20[0];
331                 t->cck[1].bw20 = dev->ee->real_cck_bw20[1];
332         } else { /* Apply CH14 OBW fixup */
333                 mt7601u_bbp_wr(dev, 4, 0x60);
334                 mt7601u_bbp_wr(dev, 178, 0);
335
336                 /* Note: vendor code is buggy here for negative values */
337                 t->cck[0].bw20 = dev->ee->real_cck_bw20[0] - 2;
338                 t->cck[1].bw20 = dev->ee->real_cck_bw20[1] - 2;
339         }
340 }
341
342 static int __mt7601u_phy_set_channel(struct mt7601u_dev *dev,
343                                      struct cfg80211_chan_def *chandef)
344 {
345 #define FREQ_PLAN_REGS  4
346         static const u8 freq_plan[14][FREQ_PLAN_REGS] = {
347                 { 0x99, 0x99,   0x09,   0x50 },
348                 { 0x46, 0x44,   0x0a,   0x50 },
349                 { 0xec, 0xee,   0x0a,   0x50 },
350                 { 0x99, 0x99,   0x0b,   0x50 },
351                 { 0x46, 0x44,   0x08,   0x51 },
352                 { 0xec, 0xee,   0x08,   0x51 },
353                 { 0x99, 0x99,   0x09,   0x51 },
354                 { 0x46, 0x44,   0x0a,   0x51 },
355                 { 0xec, 0xee,   0x0a,   0x51 },
356                 { 0x99, 0x99,   0x0b,   0x51 },
357                 { 0x46, 0x44,   0x08,   0x52 },
358                 { 0xec, 0xee,   0x08,   0x52 },
359                 { 0x99, 0x99,   0x09,   0x52 },
360                 { 0x33, 0x33,   0x0b,   0x52 },
361         };
362         struct mt76_reg_pair channel_freq_plan[FREQ_PLAN_REGS] = {
363                 { 17, 0 }, { 18, 0 }, { 19, 0 }, { 20, 0 },
364         };
365         struct mt76_reg_pair bbp_settings[3] = {
366                 { 62, 0x37 - dev->ee->lna_gain },
367                 { 63, 0x37 - dev->ee->lna_gain },
368                 { 64, 0x37 - dev->ee->lna_gain },
369         };
370
371         struct ieee80211_channel *chan = chandef->chan;
372         enum nl80211_channel_type chan_type =
373                 cfg80211_get_chandef_type(chandef);
374         struct mt7601u_rate_power *t = &dev->ee->power_rate_table;
375         int chan_idx;
376         bool chan_ext_below;
377         u8 bw;
378         int i, ret;
379
380         bw = MT_BW_20;
381         chan_ext_below = (chan_type == NL80211_CHAN_HT40MINUS);
382         chan_idx = chan->hw_value - 1;
383
384         if (chandef->width == NL80211_CHAN_WIDTH_40) {
385                 bw = MT_BW_40;
386
387                 if (chan_idx > 1 && chan_type == NL80211_CHAN_HT40MINUS)
388                         chan_idx -= 2;
389                 else if (chan_idx < 12 && chan_type == NL80211_CHAN_HT40PLUS)
390                         chan_idx += 2;
391                 else
392                         dev_err(dev->dev, "Error: invalid 40MHz channel!!\n");
393         }
394
395         if (bw != dev->bw || chan_ext_below != dev->chan_ext_below) {
396                 dev_dbg(dev->dev, "Info: switching HT mode bw:%d below:%d\n",
397                         bw, chan_ext_below);
398
399                 mt7601u_bbp_set_bw(dev, bw);
400
401                 mt7601u_bbp_set_ctrlch(dev, chan_ext_below);
402                 mt7601u_mac_set_ctrlch(dev, chan_ext_below);
403                 dev->chan_ext_below = chan_ext_below;
404         }
405
406         for (i = 0; i < FREQ_PLAN_REGS; i++)
407                 channel_freq_plan[i].value = freq_plan[chan_idx][i];
408
409         ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_RF,
410                                       channel_freq_plan, FREQ_PLAN_REGS);
411         if (ret)
412                 return ret;
413
414         mt7601u_rmw(dev, MT_TX_ALC_CFG_0, 0x3f3f,
415                     dev->ee->chan_pwr[chan_idx] & 0x3f);
416
417         ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
418                                       bbp_settings, ARRAY_SIZE(bbp_settings));
419         if (ret)
420                 return ret;
421
422         mt7601u_vco_cal(dev);
423         mt7601u_bbp_set_bw(dev, bw);
424         ret = mt7601u_set_bw_filter(dev, false);
425         if (ret)
426                 return ret;
427
428         mt7601u_apply_ch14_fixup(dev, chan->hw_value);
429         mt7601u_wr(dev, MT_TX_PWR_CFG_0, int_to_s6(t->ofdm[1].bw20) << 24 |
430                                          int_to_s6(t->ofdm[0].bw20) << 16 |
431                                          int_to_s6(t->cck[1].bw20) << 8 |
432                                          int_to_s6(t->cck[0].bw20));
433
434         if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
435                 mt7601u_agc_reset(dev);
436
437         dev->chandef = *chandef;
438
439         return 0;
440 }
441
442 int mt7601u_phy_set_channel(struct mt7601u_dev *dev,
443                             struct cfg80211_chan_def *chandef)
444 {
445         int ret;
446
447         cancel_delayed_work_sync(&dev->cal_work);
448         cancel_delayed_work_sync(&dev->freq_cal.work);
449
450         mutex_lock(&dev->hw_atomic_mutex);
451         ret = __mt7601u_phy_set_channel(dev, chandef);
452         mutex_unlock(&dev->hw_atomic_mutex);
453         if (ret)
454                 return ret;
455
456         if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
457                 return 0;
458
459         ieee80211_queue_delayed_work(dev->hw, &dev->cal_work,
460                                      MT_CALIBRATE_INTERVAL);
461         if (dev->freq_cal.enabled)
462                 ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work,
463                                              MT_FREQ_CAL_INIT_DELAY);
464         return 0;
465 }
466
467 #define BBP_R47_FLAG            GENMASK(2, 0)
468 #define BBP_R47_F_TSSI          0
469 #define BBP_R47_F_PKT_T         1
470 #define BBP_R47_F_TX_RATE       2
471 #define BBP_R47_F_TEMP          4
472 /**
473  * mt7601u_bbp_r47_get - read value through BBP R47/R49 pair
474  * @dev:        pointer to adapter structure
475  * @reg:        value of BBP R47 before the operation
476  * @flag:       one of the BBP_R47_F_* flags
477  *
478  * Convenience helper for reading values through BBP R47/R49 pair.
479  * Takes old value of BBP R47 as @reg, because callers usually have it
480  * cached already.
481  *
482  * Return: value of BBP R49.
483  */
484 static u8 mt7601u_bbp_r47_get(struct mt7601u_dev *dev, u8 reg, u8 flag)
485 {
486         flag |= reg & ~BBP_R47_FLAG;
487         mt7601u_bbp_wr(dev, 47, flag);
488         usleep_range(500, 700);
489         return mt7601u_bbp_rr(dev, 49);
490 }
491
492 static s8 mt7601u_read_bootup_temp(struct mt7601u_dev *dev)
493 {
494         u8 bbp_val, temp;
495         u32 rf_bp, rf_set;
496         int i;
497
498         rf_set = mt7601u_rr(dev, MT_RF_SETTING_0);
499         rf_bp = mt7601u_rr(dev, MT_RF_BYPASS_0);
500
501         mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
502         mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000010);
503         mt7601u_wr(dev, MT_RF_BYPASS_0, 0x00000010);
504
505         bbp_val = mt7601u_bbp_rmw(dev, 47, 0, 0x10);
506
507         mt7601u_bbp_wr(dev, 22, 0x40);
508
509         for (i = 100; i && (bbp_val & 0x10); i--)
510                 bbp_val = mt7601u_bbp_rr(dev, 47);
511
512         temp = mt7601u_bbp_r47_get(dev, bbp_val, BBP_R47_F_TEMP);
513
514         mt7601u_bbp_wr(dev, 22, 0);
515
516         bbp_val = mt7601u_bbp_rr(dev, 21);
517         bbp_val |= 0x02;
518         mt7601u_bbp_wr(dev, 21, bbp_val);
519         bbp_val &= ~0x02;
520         mt7601u_bbp_wr(dev, 21, bbp_val);
521
522         mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
523         mt7601u_wr(dev, MT_RF_SETTING_0, rf_set);
524         mt7601u_wr(dev, MT_RF_BYPASS_0, rf_bp);
525
526         trace_read_temp(dev, temp);
527         return temp;
528 }
529
530 static s8 mt7601u_read_temp(struct mt7601u_dev *dev)
531 {
532         int i;
533         u8 val;
534         s8 temp;
535
536         val = mt7601u_bbp_rmw(dev, 47, 0x7f, 0x10);
537
538         /* Note: this rarely succeeds, temp can change even if it fails. */
539         for (i = 100; i && (val & 0x10); i--)
540                 val = mt7601u_bbp_rr(dev, 47);
541
542         temp = mt7601u_bbp_r47_get(dev, val, BBP_R47_F_TEMP);
543
544         trace_read_temp(dev, temp);
545         return temp;
546 }
547
548 static void mt7601u_rxdc_cal(struct mt7601u_dev *dev)
549 {
550         static const struct mt76_reg_pair intro[] = {
551                 { 158, 0x8d }, { 159, 0xfc },
552                 { 158, 0x8c }, { 159, 0x4c },
553         }, outro[] = {
554                 { 158, 0x8d }, { 159, 0xe0 },
555         };
556         u32 mac_ctrl;
557         int i, ret;
558
559         mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
560         mt7601u_wr(dev, MT_MAC_SYS_CTRL, MT_MAC_SYS_CTRL_ENABLE_RX);
561
562         ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
563                                       intro, ARRAY_SIZE(intro));
564         if (ret)
565                 dev_err(dev->dev, "%s intro failed:%d\n", __func__, ret);
566
567         for (i = 20; i; i--) {
568                 usleep_range(300, 500);
569
570                 mt7601u_bbp_wr(dev, 158, 0x8c);
571                 if (mt7601u_bbp_rr(dev, 159) == 0x0c)
572                         break;
573         }
574         if (!i)
575                 dev_err(dev->dev, "%s timed out\n", __func__);
576
577         mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0);
578
579         ret = mt7601u_write_reg_pairs(dev, MT_MCU_MEMMAP_BBP,
580                                       outro, ARRAY_SIZE(outro));
581         if (ret)
582                 dev_err(dev->dev, "%s outro failed:%d\n", __func__, ret);
583
584         mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl);
585 }
586
587 void mt7601u_phy_recalibrate_after_assoc(struct mt7601u_dev *dev)
588 {
589         if (test_bit(MT7601U_STATE_REMOVED, &dev->state))
590                 return;
591
592         mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->curr_temp);
593
594         mt7601u_rxdc_cal(dev);
595 }
596
597 /* Note: function copied from vendor driver */
598 static s16 lin2dBd(u16 linear)
599 {
600         short exp = 0;
601         unsigned int mantisa;
602         int app, dBd;
603
604         if (WARN_ON(!linear))
605                 return -10000;
606
607         mantisa = linear;
608
609         exp = fls(mantisa) - 16;
610         if (exp > 0)
611                 mantisa >>= exp;
612         else
613                 mantisa <<= abs(exp);
614
615         if (mantisa <= 0xb800)
616                 app = (mantisa + (mantisa >> 3) + (mantisa >> 4) - 0x9600);
617         else
618                 app = (mantisa - (mantisa >> 3) - (mantisa >> 6) - 0x5a00);
619         if (app < 0)
620                 app = 0;
621
622         dBd = ((15 + exp) << 15) + app;
623         dBd = (dBd << 2) + (dBd << 1) + (dBd >> 6) + (dBd >> 7);
624         dBd = (dBd >> 10);
625
626         return dBd;
627 }
628
629 static void
630 mt7601u_set_initial_tssi(struct mt7601u_dev *dev, s16 tssi_db, s16 tssi_hvga_db)
631 {
632         struct tssi_data *d = &dev->ee->tssi_data;
633         int init_offset;
634
635         init_offset = -((tssi_db * d->slope + d->offset[1]) / 4096) + 10;
636
637         mt76_rmw(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP,
638                  int_to_s6(init_offset) & MT_TX_ALC_CFG_1_TEMP_COMP);
639 }
640
641 static void mt7601u_tssi_dc_gain_cal(struct mt7601u_dev *dev)
642 {
643         u8 rf_vga, rf_mixer, bbp_r47;
644         int i, j;
645         s8 res[4];
646         s16 tssi_init_db, tssi_init_hvga_db;
647
648         mt7601u_wr(dev, MT_RF_SETTING_0, 0x00000030);
649         mt7601u_wr(dev, MT_RF_BYPASS_0, 0x000c0030);
650         mt7601u_wr(dev, MT_MAC_SYS_CTRL, 0);
651
652         mt7601u_bbp_wr(dev, 58, 0);
653         mt7601u_bbp_wr(dev, 241, 0x2);
654         mt7601u_bbp_wr(dev, 23, 0x8);
655         bbp_r47 = mt7601u_bbp_rr(dev, 47);
656
657         /* Set VGA gain */
658         rf_vga = mt7601u_rf_rr(dev, 5, 3);
659         mt7601u_rf_wr(dev, 5, 3, 8);
660
661         /* Mixer disable */
662         rf_mixer = mt7601u_rf_rr(dev, 4, 39);
663         mt7601u_rf_wr(dev, 4, 39, 0);
664
665         for (i = 0; i < 4; i++) {
666                 mt7601u_rf_wr(dev, 4, 39, (i & 1) ? rf_mixer : 0);
667
668                 mt7601u_bbp_wr(dev, 23, (i < 2) ? 0x08 : 0x02);
669                 mt7601u_rf_wr(dev, 5, 3, (i < 2) ? 0x08 : 0x11);
670
671                 /* BBP TSSI initial and soft reset */
672                 mt7601u_bbp_wr(dev, 22, 0);
673                 mt7601u_bbp_wr(dev, 244, 0);
674
675                 mt7601u_bbp_wr(dev, 21, 1);
676                 udelay(1);
677                 mt7601u_bbp_wr(dev, 21, 0);
678
679                 /* TSSI measurement */
680                 mt7601u_bbp_wr(dev, 47, 0x50);
681                 mt7601u_bbp_wr(dev, (i & 1) ? 244 : 22, (i & 1) ? 0x31 : 0x40);
682
683                 for (j = 20; j; j--)
684                         if (!(mt7601u_bbp_rr(dev, 47) & 0x10))
685                                 break;
686                 if (!j)
687                         dev_err(dev->dev, "%s timed out\n", __func__);
688
689                 /* TSSI read */
690                 mt7601u_bbp_wr(dev, 47, 0x40);
691                 res[i] = mt7601u_bbp_rr(dev, 49);
692         }
693
694         tssi_init_db = lin2dBd((short)res[1] - res[0]);
695         tssi_init_hvga_db = lin2dBd(((short)res[3] - res[2]) * 4);
696         dev->tssi_init = res[0];
697         dev->tssi_init_hvga = res[2];
698         dev->tssi_init_hvga_offset_db = tssi_init_hvga_db - tssi_init_db;
699
700         dev_dbg(dev->dev,
701                 "TSSI_init:%hhx db:%hx hvga:%hhx hvga_db:%hx off_db:%hx\n",
702                 dev->tssi_init, tssi_init_db, dev->tssi_init_hvga,
703                 tssi_init_hvga_db, dev->tssi_init_hvga_offset_db);
704
705         mt7601u_bbp_wr(dev, 22, 0);
706         mt7601u_bbp_wr(dev, 244, 0);
707
708         mt7601u_bbp_wr(dev, 21, 1);
709         udelay(1);
710         mt7601u_bbp_wr(dev, 21, 0);
711
712         mt7601u_wr(dev, MT_RF_BYPASS_0, 0);
713         mt7601u_wr(dev, MT_RF_SETTING_0, 0);
714
715         mt7601u_rf_wr(dev, 5, 3, rf_vga);
716         mt7601u_rf_wr(dev, 4, 39, rf_mixer);
717         mt7601u_bbp_wr(dev, 47, bbp_r47);
718
719         mt7601u_set_initial_tssi(dev, tssi_init_db, tssi_init_hvga_db);
720 }
721
722 static int mt7601u_temp_comp(struct mt7601u_dev *dev, bool on)
723 {
724         int ret, temp, hi_temp = 400, lo_temp = -200;
725
726         temp = (dev->raw_temp - dev->ee->ref_temp) * MT_EE_TEMPERATURE_SLOPE;
727         dev->curr_temp = temp;
728
729         /* DPD Calibration */
730         if (temp - dev->dpd_temp > 450 || temp - dev->dpd_temp < -450) {
731                 dev->dpd_temp = temp;
732
733                 ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp);
734                 if (ret)
735                         return ret;
736
737                 mt7601u_vco_cal(dev);
738
739                 dev_dbg(dev->dev, "Recalibrate DPD\n");
740         }
741
742         /* PLL Lock Protect */
743         if (temp < -50 && !dev->pll_lock_protect) { /* < 20C */
744                 dev->pll_lock_protect =  true;
745
746                 mt7601u_rf_wr(dev, 4, 4, 6);
747                 mt7601u_rf_clear(dev, 4, 10, 0x30);
748
749                 dev_dbg(dev->dev, "PLL lock protect on - too cold\n");
750         } else if (temp > 50 && dev->pll_lock_protect) { /* > 30C */
751                 dev->pll_lock_protect = false;
752
753                 mt7601u_rf_wr(dev, 4, 4, 0);
754                 mt7601u_rf_rmw(dev, 4, 10, 0x30, 0x10);
755
756                 dev_dbg(dev->dev, "PLL lock protect off\n");
757         }
758
759         if (on) {
760                 hi_temp -= 50;
761                 lo_temp -= 50;
762         }
763
764         /* BBP CR for H, L, N temperature */
765         if (temp > hi_temp)
766                 return mt7601u_bbp_temp(dev, MT_TEMP_MODE_HIGH, "high");
767         else if (temp > lo_temp)
768                 return mt7601u_bbp_temp(dev, MT_TEMP_MODE_NORMAL, "normal");
769         else
770                 return mt7601u_bbp_temp(dev, MT_TEMP_MODE_LOW, "low");
771 }
772
773 /* Note: this is used only with TSSI, we can just use trgt_pwr from eeprom. */
774 static int mt7601u_current_tx_power(struct mt7601u_dev *dev)
775 {
776         return dev->ee->chan_pwr[dev->chandef.chan->hw_value - 1];
777 }
778
779 static bool mt7601u_use_hvga(struct mt7601u_dev *dev)
780 {
781         return !(mt7601u_current_tx_power(dev) > 20);
782 }
783
784 static s16
785 mt7601u_phy_rf_pa_mode_val(struct mt7601u_dev *dev, int phy_mode, int tx_rate)
786 {
787         static const s16 decode_tb[] = { 0, 8847, -5734, -5734 };
788         u32 reg;
789
790         switch (phy_mode) {
791         case MT_PHY_TYPE_OFDM:
792                 tx_rate += 4;
793                 fallthrough;
794         case MT_PHY_TYPE_CCK:
795                 reg = dev->rf_pa_mode[0];
796                 break;
797         default:
798                 reg = dev->rf_pa_mode[1];
799                 break;
800         }
801
802         return decode_tb[(reg >> (tx_rate * 2)) & 0x3];
803 }
804
805 static struct mt7601u_tssi_params
806 mt7601u_tssi_params_get(struct mt7601u_dev *dev)
807 {
808         static const u8 ofdm_pkt2rate[8] = { 6, 4, 2, 0, 7, 5, 3, 1 };
809         static const int static_power[4] = { 0, -49152, -98304, 49152 };
810         struct mt7601u_tssi_params p;
811         u8 bbp_r47, pkt_type, tx_rate;
812         struct power_per_rate *rate_table;
813
814         bbp_r47 = mt7601u_bbp_rr(dev, 47);
815
816         p.tssi0 = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TSSI);
817         dev->raw_temp = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TEMP);
818         pkt_type = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_PKT_T);
819
820         p.trgt_power = mt7601u_current_tx_power(dev);
821
822         switch (pkt_type & 0x03) {
823         case MT_PHY_TYPE_CCK:
824                 tx_rate = (pkt_type >> 4) & 0x03;
825                 rate_table = dev->ee->power_rate_table.cck;
826                 break;
827
828         case MT_PHY_TYPE_OFDM:
829                 tx_rate = ofdm_pkt2rate[(pkt_type >> 4) & 0x07];
830                 rate_table = dev->ee->power_rate_table.ofdm;
831                 break;
832
833         default:
834                 tx_rate = mt7601u_bbp_r47_get(dev, bbp_r47, BBP_R47_F_TX_RATE);
835                 tx_rate &= 0x7f;
836                 rate_table = dev->ee->power_rate_table.ht;
837                 break;
838         }
839
840         if (dev->bw == MT_BW_20)
841                 p.trgt_power += rate_table[tx_rate / 2].bw20;
842         else
843                 p.trgt_power += rate_table[tx_rate / 2].bw40;
844
845         p.trgt_power <<= 12;
846
847         dev_dbg(dev->dev, "tx_rate:%02hhx pwr:%08x\n", tx_rate, p.trgt_power);
848
849         p.trgt_power += mt7601u_phy_rf_pa_mode_val(dev, pkt_type & 0x03,
850                                                    tx_rate);
851
852         /* Channel 14, cck, bw20 */
853         if ((pkt_type & 0x03) == MT_PHY_TYPE_CCK) {
854                 if (mt7601u_bbp_rr(dev, 4) & 0x20)
855                         p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 18022 : 9830;
856                 else
857                         p.trgt_power += mt7601u_bbp_rr(dev, 178) ? 819 : 24576;
858         }
859
860         p.trgt_power += static_power[mt7601u_bbp_rr(dev, 1) & 0x03];
861
862         p.trgt_power += dev->ee->tssi_data.tx0_delta_offset;
863
864         dev_dbg(dev->dev,
865                 "tssi:%02hhx t_power:%08x temp:%02hhx pkt_type:%02hhx\n",
866                 p.tssi0, p.trgt_power, dev->raw_temp, pkt_type);
867
868         return p;
869 }
870
871 static bool mt7601u_tssi_read_ready(struct mt7601u_dev *dev)
872 {
873         return !(mt7601u_bbp_rr(dev, 47) & 0x10);
874 }
875
876 static int mt7601u_tssi_cal(struct mt7601u_dev *dev)
877 {
878         struct mt7601u_tssi_params params;
879         int curr_pwr, diff_pwr;
880         char tssi_offset;
881         s8 tssi_init;
882         s16 tssi_m_dc, tssi_db;
883         bool hvga;
884         u32 val;
885
886         if (!dev->ee->tssi_enabled)
887                 return 0;
888
889         hvga = mt7601u_use_hvga(dev);
890         if (!dev->tssi_read_trig)
891                 return mt7601u_mcu_tssi_read_kick(dev, hvga);
892
893         if (!mt7601u_tssi_read_ready(dev))
894                 return 0;
895
896         params = mt7601u_tssi_params_get(dev);
897
898         tssi_init = (hvga ? dev->tssi_init_hvga : dev->tssi_init);
899         tssi_m_dc = params.tssi0 - tssi_init;
900         tssi_db = lin2dBd(tssi_m_dc);
901         dev_dbg(dev->dev, "tssi dc:%04hx db:%04hx hvga:%d\n",
902                 tssi_m_dc, tssi_db, hvga);
903
904         if (dev->chandef.chan->hw_value < 5)
905                 tssi_offset = dev->ee->tssi_data.offset[0];
906         else if (dev->chandef.chan->hw_value < 9)
907                 tssi_offset = dev->ee->tssi_data.offset[1];
908         else
909                 tssi_offset = dev->ee->tssi_data.offset[2];
910
911         if (hvga)
912                 tssi_db -= dev->tssi_init_hvga_offset_db;
913
914         curr_pwr = tssi_db * dev->ee->tssi_data.slope + (tssi_offset << 9);
915         diff_pwr = params.trgt_power - curr_pwr;
916         dev_dbg(dev->dev, "Power curr:%08x diff:%08x\n", curr_pwr, diff_pwr);
917
918         if (params.tssi0 > 126 && diff_pwr > 0) {
919                 dev_err(dev->dev, "Error: TSSI upper saturation\n");
920                 diff_pwr = 0;
921         }
922         if (params.tssi0 - tssi_init < 1 && diff_pwr < 0) {
923                 dev_err(dev->dev, "Error: TSSI lower saturation\n");
924                 diff_pwr = 0;
925         }
926
927         if ((dev->prev_pwr_diff ^ diff_pwr) < 0 && abs(diff_pwr) < 4096 &&
928             (abs(diff_pwr) > abs(dev->prev_pwr_diff) ||
929              (diff_pwr > 0 && diff_pwr == -dev->prev_pwr_diff)))
930                 diff_pwr = 0;
931         else
932                 dev->prev_pwr_diff = diff_pwr;
933
934         diff_pwr += (diff_pwr > 0) ? 2048 : -2048;
935         diff_pwr /= 4096;
936
937         dev_dbg(dev->dev, "final diff: %08x\n", diff_pwr);
938
939         val = mt7601u_rr(dev, MT_TX_ALC_CFG_1);
940         curr_pwr = s6_to_int(FIELD_GET(MT_TX_ALC_CFG_1_TEMP_COMP, val));
941         diff_pwr += curr_pwr;
942         val = (val & ~MT_TX_ALC_CFG_1_TEMP_COMP) | int_to_s6(diff_pwr);
943         mt7601u_wr(dev, MT_TX_ALC_CFG_1, val);
944
945         return mt7601u_mcu_tssi_read_kick(dev, hvga);
946 }
947
948 static u8 mt7601u_agc_default(struct mt7601u_dev *dev)
949 {
950         return (dev->ee->lna_gain - 8) * 2 + 0x34;
951 }
952
953 static void mt7601u_agc_reset(struct mt7601u_dev *dev)
954 {
955         u8 agc = mt7601u_agc_default(dev);
956
957         mt7601u_bbp_wr(dev, 66, agc);
958 }
959
960 void mt7601u_agc_save(struct mt7601u_dev *dev)
961 {
962         dev->agc_save = mt7601u_bbp_rr(dev, 66);
963 }
964
965 void mt7601u_agc_restore(struct mt7601u_dev *dev)
966 {
967         mt7601u_bbp_wr(dev, 66, dev->agc_save);
968 }
969
970 static void mt7601u_agc_tune(struct mt7601u_dev *dev)
971 {
972         u8 val = mt7601u_agc_default(dev);
973         long avg_rssi;
974
975         if (test_bit(MT7601U_STATE_SCANNING, &dev->state))
976                 return;
977
978         /* Note: only in STA mode and not dozing; perhaps do this only if
979          *       there is enough rssi updates since last run?
980          *       Rssi updates are only on beacons and U2M so should work...
981          */
982         spin_lock_bh(&dev->con_mon_lock);
983         avg_rssi = ewma_rssi_read(&dev->avg_rssi);
984         spin_unlock_bh(&dev->con_mon_lock);
985         if (avg_rssi == 0)
986                 return;
987
988         avg_rssi = -avg_rssi;
989         if (avg_rssi <= -70)
990                 val -= 0x20;
991         else if (avg_rssi <= -60)
992                 val -= 0x10;
993
994         if (val != mt7601u_bbp_rr(dev, 66))
995                 mt7601u_bbp_wr(dev, 66, val);
996
997         /* TODO: also if lost a lot of beacons try resetting
998          *       (see RTMPSetAGCInitValue() call in mlme.c).
999          */
1000 }
1001
1002 static void mt7601u_phy_calibrate(struct work_struct *work)
1003 {
1004         struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev,
1005                                             cal_work.work);
1006
1007         mt7601u_agc_tune(dev);
1008         mt7601u_tssi_cal(dev);
1009         /* If TSSI calibration was run it already updated temperature. */
1010         if (!dev->ee->tssi_enabled)
1011                 dev->raw_temp = mt7601u_read_temp(dev);
1012         mt7601u_temp_comp(dev, true); /* TODO: find right value for @on */
1013
1014         ieee80211_queue_delayed_work(dev->hw, &dev->cal_work,
1015                                      MT_CALIBRATE_INTERVAL);
1016 }
1017
1018 static unsigned long
1019 __mt7601u_phy_freq_cal(struct mt7601u_dev *dev, s8 last_offset, u8 phy_mode)
1020 {
1021         u8 activate_threshold, deactivate_threshold;
1022
1023         trace_freq_cal_offset(dev, phy_mode, last_offset);
1024
1025         /* No beacons received - reschedule soon */
1026         if (last_offset == MT_FREQ_OFFSET_INVALID)
1027                 return MT_FREQ_CAL_ADJ_INTERVAL;
1028
1029         switch (phy_mode) {
1030         case MT_PHY_TYPE_CCK:
1031                 activate_threshold = 19;
1032                 deactivate_threshold = 5;
1033                 break;
1034         case MT_PHY_TYPE_OFDM:
1035                 activate_threshold = 102;
1036                 deactivate_threshold = 32;
1037                 break;
1038         case MT_PHY_TYPE_HT:
1039         case MT_PHY_TYPE_HT_GF:
1040                 activate_threshold = 82;
1041                 deactivate_threshold = 20;
1042                 break;
1043         default:
1044                 WARN_ON(1);
1045                 return MT_FREQ_CAL_CHECK_INTERVAL;
1046         }
1047
1048         if (abs(last_offset) >= activate_threshold)
1049                 dev->freq_cal.adjusting = true;
1050         else if (abs(last_offset) <= deactivate_threshold)
1051                 dev->freq_cal.adjusting = false;
1052
1053         if (!dev->freq_cal.adjusting)
1054                 return MT_FREQ_CAL_CHECK_INTERVAL;
1055
1056         if (last_offset > deactivate_threshold) {
1057                 if (dev->freq_cal.freq > 0)
1058                         dev->freq_cal.freq--;
1059                 else
1060                         dev->freq_cal.adjusting = false;
1061         } else if (last_offset < -deactivate_threshold) {
1062                 if (dev->freq_cal.freq < 0xbf)
1063                         dev->freq_cal.freq++;
1064                 else
1065                         dev->freq_cal.adjusting = false;
1066         }
1067
1068         trace_freq_cal_adjust(dev, dev->freq_cal.freq);
1069         mt7601u_rf_wr(dev, 0, 12, dev->freq_cal.freq);
1070         mt7601u_vco_cal(dev);
1071
1072         return dev->freq_cal.adjusting ? MT_FREQ_CAL_ADJ_INTERVAL :
1073                                          MT_FREQ_CAL_CHECK_INTERVAL;
1074 }
1075
1076 static void mt7601u_phy_freq_cal(struct work_struct *work)
1077 {
1078         struct mt7601u_dev *dev = container_of(work, struct mt7601u_dev,
1079                                                freq_cal.work.work);
1080         s8 last_offset;
1081         u8 phy_mode;
1082         unsigned long delay;
1083
1084         spin_lock_bh(&dev->con_mon_lock);
1085         last_offset = dev->bcn_freq_off;
1086         phy_mode = dev->bcn_phy_mode;
1087         spin_unlock_bh(&dev->con_mon_lock);
1088
1089         delay = __mt7601u_phy_freq_cal(dev, last_offset, phy_mode);
1090         ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work, delay);
1091
1092         spin_lock_bh(&dev->con_mon_lock);
1093         dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID;
1094         spin_unlock_bh(&dev->con_mon_lock);
1095 }
1096
1097 void mt7601u_phy_con_cal_onoff(struct mt7601u_dev *dev,
1098                                struct ieee80211_bss_conf *info)
1099 {
1100         struct ieee80211_vif *vif = container_of(info, struct ieee80211_vif,
1101                                                  bss_conf);
1102
1103         if (!vif->cfg.assoc)
1104                 cancel_delayed_work_sync(&dev->freq_cal.work);
1105
1106         /* Start/stop collecting beacon data */
1107         spin_lock_bh(&dev->con_mon_lock);
1108         ether_addr_copy(dev->ap_bssid, info->bssid);
1109         ewma_rssi_init(&dev->avg_rssi);
1110         dev->bcn_freq_off = MT_FREQ_OFFSET_INVALID;
1111         spin_unlock_bh(&dev->con_mon_lock);
1112
1113         dev->freq_cal.freq = dev->ee->rf_freq_off;
1114         dev->freq_cal.enabled = vif->cfg.assoc;
1115         dev->freq_cal.adjusting = false;
1116
1117         if (vif->cfg.assoc)
1118                 ieee80211_queue_delayed_work(dev->hw, &dev->freq_cal.work,
1119                                              MT_FREQ_CAL_INIT_DELAY);
1120 }
1121
1122 static int mt7601u_init_cal(struct mt7601u_dev *dev)
1123 {
1124         u32 mac_ctrl;
1125         int ret;
1126
1127         dev->raw_temp = mt7601u_read_bootup_temp(dev);
1128         dev->curr_temp = (dev->raw_temp - dev->ee->ref_temp) *
1129                 MT_EE_TEMPERATURE_SLOPE;
1130         dev->dpd_temp = dev->curr_temp;
1131
1132         mac_ctrl = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
1133
1134         ret = mt7601u_mcu_calibrate(dev, MCU_CAL_R, 0);
1135         if (ret)
1136                 return ret;
1137
1138         ret = mt7601u_rf_rr(dev, 0, 4);
1139         if (ret < 0)
1140                 return ret;
1141         ret |= 0x80;
1142         ret = mt7601u_rf_wr(dev, 0, 4, ret);
1143         if (ret)
1144                 return ret;
1145         msleep(2);
1146
1147         ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXDCOC, 0);
1148         if (ret)
1149                 return ret;
1150
1151         mt7601u_rxdc_cal(dev);
1152
1153         ret = mt7601u_set_bw_filter(dev, true);
1154         if (ret)
1155                 return ret;
1156         ret = mt7601u_mcu_calibrate(dev, MCU_CAL_LOFT, 0);
1157         if (ret)
1158                 return ret;
1159         ret = mt7601u_mcu_calibrate(dev, MCU_CAL_TXIQ, 0);
1160         if (ret)
1161                 return ret;
1162         ret = mt7601u_mcu_calibrate(dev, MCU_CAL_RXIQ, 0);
1163         if (ret)
1164                 return ret;
1165         ret = mt7601u_mcu_calibrate(dev, MCU_CAL_DPD, dev->dpd_temp);
1166         if (ret)
1167                 return ret;
1168
1169         mt7601u_rxdc_cal(dev);
1170
1171         mt7601u_tssi_dc_gain_cal(dev);
1172
1173         mt7601u_wr(dev, MT_MAC_SYS_CTRL, mac_ctrl);
1174
1175         mt7601u_temp_comp(dev, true);
1176
1177         return 0;
1178 }
1179
1180 int mt7601u_bbp_set_bw(struct mt7601u_dev *dev, int bw)
1181 {
1182         u32 val, old;
1183
1184         if (bw == dev->bw) {
1185                 /* Vendor driver does the rmc even when no change is needed. */
1186                 mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10);
1187
1188                 return 0;
1189         }
1190         dev->bw = bw;
1191
1192         /* Stop MAC for the time of bw change */
1193         old = mt7601u_rr(dev, MT_MAC_SYS_CTRL);
1194         val = old & ~(MT_MAC_SYS_CTRL_ENABLE_TX | MT_MAC_SYS_CTRL_ENABLE_RX);
1195         mt7601u_wr(dev, MT_MAC_SYS_CTRL, val);
1196         mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_TX | MT_MAC_STATUS_RX,
1197                   0, 500000);
1198
1199         mt7601u_bbp_rmc(dev, 4, 0x18, bw == MT_BW_20 ? 0 : 0x10);
1200
1201         mt7601u_wr(dev, MT_MAC_SYS_CTRL, old);
1202
1203         return mt7601u_load_bbp_temp_table_bw(dev);
1204 }
1205
1206 /**
1207  * mt7601u_set_rx_path - set rx path in BBP
1208  * @dev:        pointer to adapter structure
1209  * @path:       rx path to set values are 0-based
1210  */
1211 void mt7601u_set_rx_path(struct mt7601u_dev *dev, u8 path)
1212 {
1213         mt7601u_bbp_rmw(dev, 3, 0x18, path << 3);
1214 }
1215
1216 /**
1217  * mt7601u_set_tx_dac - set which tx DAC to use
1218  * @dev:        pointer to adapter structure
1219  * @dac:        DAC index, values are 0-based
1220  */
1221 void mt7601u_set_tx_dac(struct mt7601u_dev *dev, u8 dac)
1222 {
1223         mt7601u_bbp_rmc(dev, 1, 0x18, dac << 3);
1224 }
1225
1226 int mt7601u_phy_init(struct mt7601u_dev *dev)
1227 {
1228         int ret;
1229
1230         dev->rf_pa_mode[0] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG0);
1231         dev->rf_pa_mode[1] = mt7601u_rr(dev, MT_RF_PA_MODE_CFG1);
1232
1233         ret = mt7601u_rf_wr(dev, 0, 12, dev->ee->rf_freq_off);
1234         if (ret)
1235                 return ret;
1236         ret = mt7601u_write_reg_pairs(dev, 0, rf_central,
1237                                       ARRAY_SIZE(rf_central));
1238         if (ret)
1239                 return ret;
1240         ret = mt7601u_write_reg_pairs(dev, 0, rf_channel,
1241                                       ARRAY_SIZE(rf_channel));
1242         if (ret)
1243                 return ret;
1244         ret = mt7601u_write_reg_pairs(dev, 0, rf_vga, ARRAY_SIZE(rf_vga));
1245         if (ret)
1246                 return ret;
1247
1248         ret = mt7601u_init_cal(dev);
1249         if (ret)
1250                 return ret;
1251
1252         dev->prev_pwr_diff = 100;
1253
1254         INIT_DELAYED_WORK(&dev->cal_work, mt7601u_phy_calibrate);
1255         INIT_DELAYED_WORK(&dev->freq_cal.work, mt7601u_phy_freq_cal);
1256
1257         return 0;
1258 }
This page took 0.102716 seconds and 4 git commands to generate.