1 /* SPDX-License-Identifier: ISC */
3 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
4 * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
5 * Copyright (c) 2006-2012 Wilocity
9 * This file contains the definitions of the WMI protocol specified in the
10 * Wireless Module Interface (WMI) for the Qualcomm
11 * 60 GHz wireless solution.
12 * It includes definitions of all the commands and events.
13 * Commands are messages from the host to the WM.
14 * Events are messages from the WM to the host.
16 * This is an automatically generated file.
19 #ifndef __WILOCITY_WMI_H__
20 #define __WILOCITY_WMI_H__
22 #define WMI_DEFAULT_ASSOC_STA (1)
23 #define WMI_MAC_LEN (6)
24 #define WMI_PROX_RANGE_NUM (3)
25 #define WMI_MAX_LOSS_DMG_BEACONS (20)
26 #define MAX_NUM_OF_SECTORS (128)
27 #define WMI_INVALID_TEMPERATURE (0xFFFFFFFF)
28 #define WMI_SCHED_MAX_ALLOCS_PER_CMD (4)
29 #define WMI_RF_DTYPE_LENGTH (3)
30 #define WMI_RF_ETYPE_LENGTH (3)
31 #define WMI_RF_RX2TX_LENGTH (3)
32 #define WMI_RF_ETYPE_VAL_PER_RANGE (5)
33 /* DTYPE configuration array size
34 * must always be kept equal to (WMI_RF_DTYPE_LENGTH+1)
36 #define WMI_RF_DTYPE_CONF_LENGTH (4)
37 /* ETYPE configuration array size
38 * must always be kept equal to
39 * (WMI_RF_ETYPE_LENGTH+WMI_RF_ETYPE_VAL_PER_RANGE)
41 #define WMI_RF_ETYPE_CONF_LENGTH (8)
42 /* RX2TX configuration array size
43 * must always be kept equal to (WMI_RF_RX2TX_LENGTH+1)
45 #define WMI_RF_RX2TX_CONF_LENGTH (4)
46 /* Qos configuration */
47 #define WMI_QOS_NUM_OF_PRIORITY (4)
48 #define WMI_QOS_MIN_DEFAULT_WEIGHT (10)
49 #define WMI_QOS_VRING_SLOT_MIN_MS (2)
50 #define WMI_QOS_VRING_SLOT_MAX_MS (10)
51 /* (WMI_QOS_MIN_DEFAULT_WEIGHT * WMI_QOS_VRING_SLOT_MAX_MS /
52 * WMI_QOS_VRING_SLOT_MIN_MS)
54 #define WMI_QOS_MAX_WEIGHT 50
55 #define WMI_QOS_SET_VIF_PRIORITY (0xFF)
56 #define WMI_QOS_DEFAULT_PRIORITY (WMI_QOS_NUM_OF_PRIORITY)
57 #define WMI_MAX_XIF_PORTS_NUM (8)
60 * used for commands and events
64 FIRST_DBG_MID_ID = 0x10,
65 LAST_DBG_MID_ID = 0xFE,
70 * Each ID maps to a bit in a 32-bit bitmask value provided by the FW to
73 enum wmi_fw_capability {
74 WMI_FW_CAPABILITY_FTM = 0,
75 WMI_FW_CAPABILITY_PS_CONFIG = 1,
76 WMI_FW_CAPABILITY_RF_SECTORS = 2,
77 WMI_FW_CAPABILITY_MGMT_RETRY_LIMIT = 3,
78 WMI_FW_CAPABILITY_AP_SME_OFFLOAD_PARTIAL = 4,
79 WMI_FW_CAPABILITY_WMI_ONLY = 5,
80 WMI_FW_CAPABILITY_THERMAL_THROTTLING = 7,
81 WMI_FW_CAPABILITY_D3_SUSPEND = 8,
82 WMI_FW_CAPABILITY_LONG_RANGE = 9,
83 WMI_FW_CAPABILITY_FIXED_SCHEDULING = 10,
84 WMI_FW_CAPABILITY_MULTI_DIRECTED_OMNIS = 11,
85 WMI_FW_CAPABILITY_RSSI_REPORTING = 12,
86 WMI_FW_CAPABILITY_SET_SILENT_RSSI_TABLE = 13,
87 WMI_FW_CAPABILITY_LO_POWER_CALIB_FROM_OTP = 14,
88 WMI_FW_CAPABILITY_PNO = 15,
89 WMI_FW_CAPABILITY_CHANNEL_BONDING = 17,
90 WMI_FW_CAPABILITY_REF_CLOCK_CONTROL = 18,
91 WMI_FW_CAPABILITY_AP_SME_OFFLOAD_NONE = 19,
92 WMI_FW_CAPABILITY_MULTI_VIFS = 20,
93 WMI_FW_CAPABILITY_FT_ROAMING = 21,
94 WMI_FW_CAPABILITY_BACK_WIN_SIZE_64 = 22,
95 WMI_FW_CAPABILITY_AMSDU = 23,
96 WMI_FW_CAPABILITY_RAW_MODE = 24,
97 WMI_FW_CAPABILITY_TX_REQ_EXT = 25,
98 WMI_FW_CAPABILITY_CHANNEL_4 = 26,
99 WMI_FW_CAPABILITY_IPA = 27,
100 WMI_FW_CAPABILITY_TEMPERATURE_ALL_RF = 30,
101 WMI_FW_CAPABILITY_SPLIT_REKEY = 31,
102 WMI_FW_CAPABILITY_MAX,
113 /* List of Commands */
114 enum wmi_command_id {
115 WMI_CONNECT_CMDID = 0x01,
116 WMI_DISCONNECT_CMDID = 0x03,
117 WMI_DISCONNECT_STA_CMDID = 0x04,
118 WMI_START_SCHED_SCAN_CMDID = 0x05,
119 WMI_STOP_SCHED_SCAN_CMDID = 0x06,
120 WMI_START_SCAN_CMDID = 0x07,
121 WMI_SET_BSS_FILTER_CMDID = 0x09,
122 WMI_SET_PROBED_SSID_CMDID = 0x0A,
124 WMI_SET_LISTEN_INT_CMDID = 0x0B,
125 WMI_FT_AUTH_CMDID = 0x0C,
126 WMI_FT_REASSOC_CMDID = 0x0D,
127 WMI_UPDATE_FT_IES_CMDID = 0x0E,
128 WMI_BCON_CTRL_CMDID = 0x0F,
129 WMI_ADD_CIPHER_KEY_CMDID = 0x16,
130 WMI_DELETE_CIPHER_KEY_CMDID = 0x17,
131 WMI_PCP_CONF_CMDID = 0x18,
132 WMI_SET_APPIE_CMDID = 0x3F,
133 WMI_SET_WSC_STATUS_CMDID = 0x41,
134 WMI_PXMT_RANGE_CFG_CMDID = 0x42,
135 WMI_PXMT_SNR2_RANGE_CFG_CMDID = 0x43,
136 WMI_RADAR_GENERAL_CONFIG_CMDID = 0x100,
137 WMI_RADAR_CONFIG_SELECT_CMDID = 0x101,
138 WMI_RADAR_PARAMS_CONFIG_CMDID = 0x102,
139 WMI_RADAR_SET_MODE_CMDID = 0x103,
140 WMI_RADAR_CONTROL_CMDID = 0x104,
141 WMI_RADAR_PCI_CONTROL_CMDID = 0x105,
142 WMI_MEM_READ_CMDID = 0x800,
143 WMI_MEM_WR_CMDID = 0x801,
144 WMI_ECHO_CMDID = 0x803,
145 WMI_DEEP_ECHO_CMDID = 0x804,
146 WMI_CONFIG_MAC_CMDID = 0x805,
148 WMI_CONFIG_PHY_DEBUG_CMDID = 0x806,
149 WMI_ADD_DEBUG_TX_PCKT_CMDID = 0x808,
150 WMI_PHY_GET_STATISTICS_CMDID = 0x809,
152 WMI_FS_TUNE_CMDID = 0x80A,
154 WMI_CORR_MEASURE_CMDID = 0x80B,
155 WMI_READ_RSSI_CMDID = 0x80C,
156 WMI_TEMP_SENSE_CMDID = 0x80E,
157 WMI_DC_CALIB_CMDID = 0x80F,
159 WMI_SEND_TONE_CMDID = 0x810,
161 WMI_IQ_TX_CALIB_CMDID = 0x811,
163 WMI_IQ_RX_CALIB_CMDID = 0x812,
164 WMI_SET_WORK_MODE_CMDID = 0x815,
165 WMI_LO_LEAKAGE_CALIB_CMDID = 0x816,
166 WMI_LO_POWER_CALIB_FROM_OTP_CMDID = 0x817,
167 WMI_SILENT_RSSI_CALIB_CMDID = 0x81D,
169 WMI_RF_RX_TEST_CMDID = 0x81E,
170 WMI_CFG_RX_CHAIN_CMDID = 0x820,
171 WMI_VRING_CFG_CMDID = 0x821,
172 WMI_BCAST_VRING_CFG_CMDID = 0x822,
173 WMI_RING_BA_EN_CMDID = 0x823,
174 WMI_RING_BA_DIS_CMDID = 0x824,
175 WMI_RCP_ADDBA_RESP_CMDID = 0x825,
176 WMI_RCP_DELBA_CMDID = 0x826,
177 WMI_SET_SSID_CMDID = 0x827,
178 WMI_GET_SSID_CMDID = 0x828,
179 WMI_SET_PCP_CHANNEL_CMDID = 0x829,
180 WMI_GET_PCP_CHANNEL_CMDID = 0x82A,
181 WMI_SW_TX_REQ_CMDID = 0x82B,
182 /* Event is shared between WMI_SW_TX_REQ_CMDID and
183 * WMI_SW_TX_REQ_EXT_CMDID
185 WMI_SW_TX_REQ_EXT_CMDID = 0x82C,
186 WMI_MLME_PUSH_CMDID = 0x835,
187 WMI_BEAMFORMING_MGMT_CMDID = 0x836,
188 WMI_BF_TXSS_MGMT_CMDID = 0x837,
189 WMI_BF_SM_MGMT_CMDID = 0x838,
190 WMI_BF_RXSS_MGMT_CMDID = 0x839,
191 WMI_BF_TRIG_CMDID = 0x83A,
192 WMI_RCP_ADDBA_RESP_EDMA_CMDID = 0x83B,
193 WMI_LINK_MAINTAIN_CFG_WRITE_CMDID = 0x842,
194 WMI_LINK_MAINTAIN_CFG_READ_CMDID = 0x843,
195 WMI_SET_LINK_MONITOR_CMDID = 0x845,
196 WMI_SET_SECTORS_CMDID = 0x849,
197 WMI_MAINTAIN_PAUSE_CMDID = 0x850,
198 WMI_MAINTAIN_RESUME_CMDID = 0x851,
199 WMI_RS_MGMT_CMDID = 0x852,
200 WMI_RF_MGMT_CMDID = 0x853,
201 WMI_RF_XPM_READ_CMDID = 0x856,
202 WMI_RF_XPM_WRITE_CMDID = 0x857,
203 WMI_LED_CFG_CMDID = 0x858,
204 WMI_SET_CONNECT_SNR_THR_CMDID = 0x85B,
205 WMI_SET_ACTIVE_SILENT_RSSI_TABLE_CMDID = 0x85C,
206 WMI_RF_PWR_ON_DELAY_CMDID = 0x85D,
207 WMI_SET_HIGH_POWER_TABLE_PARAMS_CMDID = 0x85E,
208 WMI_FIXED_SCHEDULING_UL_CONFIG_CMDID = 0x85F,
209 /* Performance monitoring commands */
210 WMI_BF_CTRL_CMDID = 0x862,
211 WMI_NOTIFY_REQ_CMDID = 0x863,
212 WMI_GET_STATUS_CMDID = 0x864,
213 WMI_GET_RF_STATUS_CMDID = 0x866,
214 WMI_GET_BASEBAND_TYPE_CMDID = 0x867,
215 WMI_VRING_SWITCH_TIMING_CONFIG_CMDID = 0x868,
216 WMI_UNIT_TEST_CMDID = 0x900,
217 WMI_FLASH_READ_CMDID = 0x902,
218 WMI_FLASH_WRITE_CMDID = 0x903,
219 /* Power management */
220 WMI_TRAFFIC_SUSPEND_CMDID = 0x904,
221 WMI_TRAFFIC_RESUME_CMDID = 0x905,
223 WMI_P2P_CFG_CMDID = 0x910,
224 WMI_PORT_ALLOCATE_CMDID = 0x911,
225 WMI_PORT_DELETE_CMDID = 0x912,
226 WMI_POWER_MGMT_CFG_CMDID = 0x913,
227 WMI_START_LISTEN_CMDID = 0x914,
228 WMI_START_SEARCH_CMDID = 0x915,
229 WMI_DISCOVERY_START_CMDID = 0x916,
230 WMI_DISCOVERY_STOP_CMDID = 0x917,
231 WMI_PCP_START_CMDID = 0x918,
232 WMI_PCP_STOP_CMDID = 0x919,
233 WMI_GET_PCP_FACTOR_CMDID = 0x91B,
234 /* Power Save Configuration Commands */
235 WMI_PS_DEV_PROFILE_CFG_CMDID = 0x91C,
236 WMI_RS_ENABLE_CMDID = 0x91E,
237 WMI_RS_CFG_EX_CMDID = 0x91F,
238 WMI_GET_DETAILED_RS_RES_EX_CMDID = 0x920,
240 WMI_RS_CFG_CMDID = 0x921,
242 WMI_GET_DETAILED_RS_RES_CMDID = 0x922,
243 WMI_AOA_MEAS_CMDID = 0x923,
244 WMI_BRP_SET_ANT_LIMIT_CMDID = 0x924,
245 WMI_SET_MGMT_RETRY_LIMIT_CMDID = 0x930,
246 WMI_GET_MGMT_RETRY_LIMIT_CMDID = 0x931,
247 WMI_NEW_STA_CMDID = 0x935,
248 WMI_DEL_STA_CMDID = 0x936,
249 WMI_SET_THERMAL_THROTTLING_CFG_CMDID = 0x940,
250 WMI_GET_THERMAL_THROTTLING_CFG_CMDID = 0x941,
251 /* Read Power Save profile type */
252 WMI_PS_DEV_PROFILE_CFG_READ_CMDID = 0x942,
253 WMI_TSF_SYNC_CMDID = 0x973,
254 WMI_TOF_SESSION_START_CMDID = 0x991,
255 WMI_TOF_GET_CAPABILITIES_CMDID = 0x992,
256 WMI_TOF_SET_LCR_CMDID = 0x993,
257 WMI_TOF_SET_LCI_CMDID = 0x994,
258 WMI_TOF_CFG_RESPONDER_CMDID = 0x996,
259 WMI_TOF_SET_TX_RX_OFFSET_CMDID = 0x997,
260 WMI_TOF_GET_TX_RX_OFFSET_CMDID = 0x998,
261 WMI_TOF_CHANNEL_INFO_CMDID = 0x999,
262 WMI_GET_RF_SECTOR_PARAMS_CMDID = 0x9A0,
263 WMI_SET_RF_SECTOR_PARAMS_CMDID = 0x9A1,
264 WMI_GET_SELECTED_RF_SECTOR_INDEX_CMDID = 0x9A2,
265 WMI_SET_SELECTED_RF_SECTOR_INDEX_CMDID = 0x9A3,
266 WMI_SET_RF_SECTOR_ON_CMDID = 0x9A4,
267 WMI_PRIO_TX_SECTORS_ORDER_CMDID = 0x9A5,
268 WMI_PRIO_TX_SECTORS_NUMBER_CMDID = 0x9A6,
269 WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_CMDID = 0x9A7,
271 WMI_BF_CONTROL_CMDID = 0x9AA,
272 WMI_BF_CONTROL_EX_CMDID = 0x9AB,
273 WMI_TX_STATUS_RING_ADD_CMDID = 0x9C0,
274 WMI_RX_STATUS_RING_ADD_CMDID = 0x9C1,
275 WMI_TX_DESC_RING_ADD_CMDID = 0x9C2,
276 WMI_RX_DESC_RING_ADD_CMDID = 0x9C3,
277 WMI_BCAST_DESC_RING_ADD_CMDID = 0x9C4,
278 WMI_CFG_DEF_RX_OFFLOAD_CMDID = 0x9C5,
279 WMI_SCHEDULING_SCHEME_CMDID = 0xA01,
280 WMI_FIXED_SCHEDULING_CONFIG_CMDID = 0xA02,
281 WMI_ENABLE_FIXED_SCHEDULING_CMDID = 0xA03,
282 WMI_SET_MULTI_DIRECTED_OMNIS_CONFIG_CMDID = 0xA04,
283 WMI_SET_LONG_RANGE_CONFIG_CMDID = 0xA05,
284 WMI_GET_ASSOC_LIST_CMDID = 0xA06,
285 WMI_GET_CCA_INDICATIONS_CMDID = 0xA07,
286 WMI_SET_CCA_INDICATIONS_BI_AVG_NUM_CMDID = 0xA08,
287 WMI_INTERNAL_FW_IOCTL_CMDID = 0xA0B,
288 WMI_LINK_STATS_CMDID = 0xA0C,
289 WMI_SET_GRANT_MCS_CMDID = 0xA0E,
290 WMI_SET_AP_SLOT_SIZE_CMDID = 0xA0F,
291 WMI_SET_VRING_PRIORITY_WEIGHT_CMDID = 0xA10,
292 WMI_SET_VRING_PRIORITY_CMDID = 0xA11,
293 WMI_RBUFCAP_CFG_CMDID = 0xA12,
294 WMI_TEMP_SENSE_ALL_CMDID = 0xA13,
295 WMI_SET_MAC_ADDRESS_CMDID = 0xF003,
296 WMI_ABORT_SCAN_CMDID = 0xF007,
297 WMI_SET_PROMISCUOUS_MODE_CMDID = 0xF041,
299 WMI_GET_PMK_CMDID = 0xF048,
300 WMI_SET_PASSPHRASE_CMDID = 0xF049,
302 WMI_SEND_ASSOC_RES_CMDID = 0xF04A,
304 WMI_SET_ASSOC_REQ_RELAY_CMDID = 0xF04B,
305 WMI_MAC_ADDR_REQ_CMDID = 0xF04D,
306 WMI_FW_VER_CMDID = 0xF04E,
307 WMI_PMC_CMDID = 0xF04F,
310 /* WMI_CONNECT_CMDID */
311 enum wmi_network_type {
312 WMI_NETTYPE_INFRA = 0x01,
313 WMI_NETTYPE_ADHOC = 0x02,
314 WMI_NETTYPE_ADHOC_CREATOR = 0x04,
315 WMI_NETTYPE_AP = 0x10,
316 WMI_NETTYPE_P2P = 0x20,
318 WMI_NETTYPE_WBE = 0x40,
321 enum wmi_dot11_auth_mode {
322 WMI_AUTH11_OPEN = 0x01,
323 WMI_AUTH11_SHARED = 0x02,
324 WMI_AUTH11_LEAP = 0x04,
325 WMI_AUTH11_WSC = 0x08,
329 WMI_AUTH_NONE = 0x01,
331 WMI_AUTH_WPA2 = 0x04,
332 WMI_AUTH_WPA_PSK = 0x08,
333 WMI_AUTH_WPA2_PSK = 0x10,
334 WMI_AUTH_WPA_CCKM = 0x20,
335 WMI_AUTH_WPA2_CCKM = 0x40,
338 enum wmi_crypto_type {
339 WMI_CRYPT_NONE = 0x01,
340 WMI_CRYPT_AES_GCMP = 0x20,
343 enum wmi_connect_ctrl_flag_bits {
344 WMI_CONNECT_ASSOC_POLICY_USER = 0x01,
345 WMI_CONNECT_SEND_REASSOC = 0x02,
346 WMI_CONNECT_IGNORE_WPA_GROUP_CIPHER = 0x04,
347 WMI_CONNECT_PROFILE_MATCH_DONE = 0x08,
348 WMI_CONNECT_IGNORE_AAC_BEACON = 0x10,
349 WMI_CONNECT_CSA_FOLLOW_BSS = 0x20,
350 WMI_CONNECT_DO_WPA_OFFLOAD = 0x40,
351 WMI_CONNECT_DO_NOT_DEAUTH = 0x80,
354 #define WMI_MAX_SSID_LEN (32)
357 WMI_CHANNEL_1 = 0x00,
358 WMI_CHANNEL_2 = 0x01,
359 WMI_CHANNEL_3 = 0x02,
360 WMI_CHANNEL_4 = 0x03,
361 WMI_CHANNEL_5 = 0x04,
362 WMI_CHANNEL_6 = 0x05,
363 WMI_CHANNEL_9 = 0x06,
364 WMI_CHANNEL_10 = 0x07,
365 WMI_CHANNEL_11 = 0x08,
366 WMI_CHANNEL_12 = 0x09,
369 /* WMI_CONNECT_CMDID */
370 struct wmi_connect_cmd {
374 u8 pairwise_crypto_type;
375 u8 pairwise_crypto_len;
376 u8 group_crypto_type;
379 u8 ssid[WMI_MAX_SSID_LEN];
380 /* enum wmi_channel WMI_CHANNEL_1..WMI_CHANNEL_6; for EDMG this is
381 * the primary channel number
384 /* enum wmi_channel WMI_CHANNEL_9..WMI_CHANNEL_12 */
386 u8 bssid[WMI_MAC_LEN];
388 u8 dst_mac[WMI_MAC_LEN];
392 /* WMI_DISCONNECT_STA_CMDID */
393 struct wmi_disconnect_sta_cmd {
394 u8 dst_mac[WMI_MAC_LEN];
395 __le16 disconnect_reason;
398 #define WMI_MAX_KEY_INDEX (3)
399 #define WMI_MAX_KEY_LEN (32)
400 #define WMI_PASSPHRASE_LEN (64)
402 /* WMI_SET_PASSPHRASE_CMDID */
403 struct wmi_set_passphrase_cmd {
404 u8 ssid[WMI_MAX_SSID_LEN];
405 u8 passphrase[WMI_PASSPHRASE_LEN];
410 /* WMI_ADD_CIPHER_KEY_CMDID */
412 WMI_KEY_USE_PAIRWISE = 0x00,
413 WMI_KEY_USE_RX_GROUP = 0x01,
414 WMI_KEY_USE_TX_GROUP = 0x02,
415 WMI_KEY_USE_STORE_PTK = 0x03,
416 WMI_KEY_USE_APPLY_PTK = 0x04,
419 struct wmi_add_cipher_key_cmd {
422 /* enum wmi_key_usage */
425 /* key replay sequence counter */
427 u8 key[WMI_MAX_KEY_LEN];
428 /* Additional Key Control information */
433 /* WMI_DELETE_CIPHER_KEY_CMDID */
434 struct wmi_delete_cipher_key_cmd {
439 /* WMI_START_SCAN_CMDID
441 * Start L1 scan operation
444 * - WMI_RX_MGMT_PACKET_EVENTID - for every probe resp.
445 * - WMI_SCAN_COMPLETE_EVENTID
448 WMI_ACTIVE_SCAN = 0x00,
449 WMI_SHORT_SCAN = 0x01,
450 WMI_PASSIVE_SCAN = 0x02,
451 WMI_DIRECT_SCAN = 0x03,
452 WMI_LONG_SCAN = 0x04,
455 /* WMI_START_SCAN_CMDID */
456 struct wmi_start_scan_cmd {
457 u8 direct_scan_mac_addr[WMI_MAC_LEN];
458 /* run scan with discovery beacon. Relevant for ACTIVE scan only. */
461 /* Max duration in the home channel(ms) */
463 /* Time interval between scans (ms) */
464 __le32 force_scan_interval;
465 /* enum wmi_scan_type */
467 /* how many channels follow */
477 } channel_list[] __counted_by(num_channels);
480 #define WMI_MAX_PNO_SSID_NUM (16)
481 #define WMI_MAX_CHANNEL_NUM (6)
482 #define WMI_MAX_PLANS_NUM (2)
484 /* WMI_START_SCHED_SCAN_CMDID */
485 struct wmi_sched_scan_ssid_match {
487 u8 ssid[WMI_MAX_SSID_LEN];
490 u8 add_ssid_to_probe;
494 /* WMI_START_SCHED_SCAN_CMDID */
495 struct wmi_sched_scan_plan {
497 __le16 num_of_iterations;
500 /* WMI_START_SCHED_SCAN_CMDID */
501 struct wmi_start_sched_scan_cmd {
502 struct wmi_sched_scan_ssid_match ssid_for_match[WMI_MAX_PNO_SSID_NUM];
504 s8 min_rssi_threshold;
505 u8 channel_list[WMI_MAX_CHANNEL_NUM];
508 __le16 initial_delay_sec;
509 struct wmi_sched_scan_plan scan_plans[WMI_MAX_PLANS_NUM];
512 /* WMI_FT_AUTH_CMDID */
513 struct wmi_ft_auth_cmd {
514 u8 bssid[WMI_MAC_LEN];
515 /* enum wmi_channel */
517 /* enum wmi_channel */
522 /* WMI_FT_REASSOC_CMDID */
523 struct wmi_ft_reassoc_cmd {
524 u8 bssid[WMI_MAC_LEN];
528 /* WMI_UPDATE_FT_IES_CMDID */
529 struct wmi_update_ft_ies_cmd {
530 /* Length of the FT IEs */
536 /* WMI_SET_PROBED_SSID_CMDID */
537 #define MAX_PROBED_SSID_INDEX (3)
541 WMI_SSID_FLAG_DISABLE = 0x00,
542 /* probes specified ssid */
543 WMI_SSID_FLAG_SPECIFIC = 0x01,
544 /* probes for any ssid */
545 WMI_SSID_FLAG_ANY = 0x02,
548 struct wmi_probed_ssid_cmd {
549 /* 0 to MAX_PROBED_SSID_INDEX */
551 /* enum wmi_ssid_flag */
554 u8 ssid[WMI_MAX_SSID_LEN];
557 /* WMI_SET_APPIE_CMDID
558 * Add Application specified IE to a management frame
560 #define WMI_MAX_IE_LEN (1024)
563 enum wmi_mgmt_frame_type {
564 WMI_FRAME_BEACON = 0x00,
565 WMI_FRAME_PROBE_REQ = 0x01,
566 WMI_FRAME_PROBE_RESP = 0x02,
567 WMI_FRAME_ASSOC_REQ = 0x03,
568 WMI_FRAME_ASSOC_RESP = 0x04,
569 WMI_NUM_MGMT_FRAME = 0x05,
572 struct wmi_set_appie_cmd {
573 /* enum wmi_mgmt_frame_type */
576 /* Length of the IE to be added to MGMT frame */
581 /* WMI_PXMT_RANGE_CFG_CMDID */
582 struct wmi_pxmt_range_cfg_cmd {
583 u8 dst_mac[WMI_MAC_LEN];
587 /* WMI_PXMT_SNR2_RANGE_CFG_CMDID */
588 struct wmi_pxmt_snr2_range_cfg_cmd {
592 /* WMI_RADAR_GENERAL_CONFIG_CMDID */
593 struct wmi_radar_general_config_cmd {
594 /* Number of pulses (CIRs) in FW FIFO to initiate pulses transfer
597 __le32 fifo_watermark;
598 /* In unit of us, in the range [100, 1000000] */
600 /* Valid in the range [1, 32768], 0xFFFF means infinite */
602 /* In unit of 330Mhz clk, in the range [4, 2000]*330 */
604 /* In the range of [1,4096] */
606 /* Number of taps after cTap per CIR */
608 /* Offset from the main tap (0 = zero-distance). In the range of [0,
611 u8 first_sample_offset;
612 /* Number of Pulses to average, 1, 2, 4, 8 */
614 /* Number of adjacent taps to average, 1, 2, 4, 8 */
616 /* The index to config general params */
621 /* WMI_RADAR_CONFIG_SELECT_CMDID */
622 struct wmi_radar_config_select_cmd {
623 /* Select the general params index to use */
626 /* 0 means don't update burst_active_vector */
627 __le32 burst_active_vector;
628 /* 0 means don't update pulse_active_vector */
629 __le32 pulse_active_vector;
632 /* WMI_RADAR_PARAMS_CONFIG_CMDID */
633 struct wmi_radar_params_config_cmd {
634 /* The burst index selected to config */
636 /* 0-not active, 1-active */
638 /* The pulse index selected to config */
640 /* 0-not active, 1-active */
642 /* TX RF to use on current pulse */
645 /* Offset from calibrated value.(expected to be 0)(value is row in
649 /* expected to be 0 */
651 /* RX RF to use on current pulse */
654 /* Offset from calibrated value.(expected to be 0)(value is row in
658 /* Value in dB.(expected to be 0) */
660 /* Offset from calibrated value.(expected to be 0) */
665 /* WMI_RADAR_SET_MODE_CMDID */
666 struct wmi_radar_set_mode_cmd {
667 /* 0-disable/1-enable */
669 /* enum wmi_channel */
671 /* In the range of [0,7], 0xff means use default */
673 /* In the range of [0,7], 0xff means use default */
677 /* WMI_RADAR_CONTROL_CMDID */
678 struct wmi_radar_control_cmd {
684 /* WMI_RADAR_PCI_CONTROL_CMDID */
685 struct wmi_radar_pci_control_cmd {
686 /* pcie host buffer start address */
688 /* pcie host control block address */
689 __le64 control_block_addr;
690 /* pcie host buffer size */
695 /* WMI_RF_MGMT_CMDID */
696 enum wmi_rf_mgmt_type {
697 WMI_RF_MGMT_W_DISABLE = 0x00,
698 WMI_RF_MGMT_W_ENABLE = 0x01,
699 WMI_RF_MGMT_GET_STATUS = 0x02,
702 /* WMI_BF_CONTROL_CMDID */
703 enum wmi_bf_triggers {
704 WMI_BF_TRIGGER_RS_MCS1_TH_FAILURE = 0x01,
705 WMI_BF_TRIGGER_RS_MCS1_NO_BACK_FAILURE = 0x02,
706 WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_TXOP = 0x04,
707 WMI_BF_TRIGGER_MAX_BACK_FAILURE = 0x08,
708 WMI_BF_TRIGGER_FW = 0x10,
709 WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_KEEP_ALIVE = 0x20,
710 WMI_BF_TRIGGER_AOA = 0x40,
711 WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_UPM = 0x80,
714 /* WMI_RF_MGMT_CMDID */
715 struct wmi_rf_mgmt_cmd {
719 /* WMI_CORR_MEASURE_CMDID */
720 struct wmi_corr_measure_cmd {
722 __le32 length_samples;
726 /* WMI_SET_SSID_CMDID */
727 struct wmi_set_ssid_cmd {
729 u8 ssid[WMI_MAX_SSID_LEN];
732 /* WMI_SET_PCP_CHANNEL_CMDID */
733 struct wmi_set_pcp_channel_cmd {
738 /* WMI_BCON_CTRL_CMDID */
739 struct wmi_bcon_ctrl_cmd {
740 __le16 bcon_interval;
744 u8 pcp_max_assoc_sta;
745 u8 disable_sec_offload;
749 /* A-BFT length override if non-0 */
754 /* WMI_PORT_ALLOCATE_CMDID */
759 WMI_PORT_P2P_DEV = 0x03,
760 WMI_PORT_P2P_CLIENT = 0x04,
761 WMI_PORT_P2P_GO = 0x05,
764 /* WMI_PORT_ALLOCATE_CMDID */
765 struct wmi_port_allocate_cmd {
771 /* WMI_PORT_DELETE_CMDID */
772 struct wmi_port_delete_cmd {
777 /* WMI_TRAFFIC_SUSPEND_CMD wakeup trigger bit mask values */
778 enum wmi_wakeup_trigger {
779 WMI_WAKEUP_TRIGGER_UCAST = 0x01,
780 WMI_WAKEUP_TRIGGER_BCAST = 0x02,
783 /* WMI_TRAFFIC_SUSPEND_CMDID */
784 struct wmi_traffic_suspend_cmd {
785 /* Bit vector: bit[0] - wake on Unicast, bit[1] - wake on Broadcast */
789 /* WMI_P2P_CFG_CMDID */
790 enum wmi_discovery_mode {
791 WMI_DISCOVERY_MODE_NON_OFFLOAD = 0x00,
792 WMI_DISCOVERY_MODE_OFFLOAD = 0x01,
793 WMI_DISCOVERY_MODE_PEER2PEER = 0x02,
796 struct wmi_p2p_cfg_cmd {
797 /* enum wmi_discovery_mode */
800 /* base to listen/search duration calculation */
801 __le16 bcon_interval;
804 /* WMI_POWER_MGMT_CFG_CMDID */
805 enum wmi_power_source_type {
806 WMI_POWER_SOURCE_BATTERY = 0x00,
807 WMI_POWER_SOURCE_OTHER = 0x01,
810 struct wmi_power_mgmt_cfg_cmd {
811 /* enum wmi_power_source_type */
816 /* WMI_PCP_START_CMDID */
817 enum wmi_ap_sme_offload_mode {
818 /* Full AP SME in FW */
819 WMI_AP_SME_OFFLOAD_FULL = 0x00,
820 /* Probe AP SME in FW */
821 WMI_AP_SME_OFFLOAD_PARTIAL = 0x01,
823 WMI_AP_SME_OFFLOAD_NONE = 0x02,
826 /* WMI_PCP_START_CMDID */
827 struct wmi_pcp_start_cmd {
828 __le16 bcon_interval;
829 u8 pcp_max_assoc_sta;
832 /* enum wmi_channel WMI_CHANNEL_9..WMI_CHANNEL_12 */
836 /* A-BFT length override if non-0 */
838 /* enum wmi_ap_sme_offload_mode_e */
839 u8 ap_sme_offload_mode;
841 /* enum wmi_channel WMI_CHANNEL_1..WMI_CHANNEL_6; for EDMG this is
842 * the primary channel number
845 u8 disable_sec_offload;
849 /* WMI_SW_TX_REQ_CMDID */
850 struct wmi_sw_tx_req_cmd {
851 u8 dst_mac[WMI_MAC_LEN];
856 /* WMI_SW_TX_REQ_EXT_CMDID */
857 struct wmi_sw_tx_req_ext_cmd {
858 u8 dst_mac[WMI_MAC_LEN];
861 /* Channel to use, 0xFF for currently active channel */
867 /* WMI_VRING_SWITCH_TIMING_CONFIG_CMDID */
868 struct wmi_vring_switch_timing_config_cmd {
869 /* Set vring timing configuration:
871 * defined interval for vring switch
873 __le32 interval_usec;
874 /* vring inactivity threshold */
878 struct wmi_sw_ring_cfg {
879 __le64 ring_mem_base;
881 __le16 max_mpdu_size;
884 /* wmi_vring_cfg_schd */
885 struct wmi_vring_cfg_schd {
890 enum wmi_vring_cfg_encap_trans_type {
891 WMI_VRING_ENC_TYPE_802_3 = 0x00,
892 WMI_VRING_ENC_TYPE_NATIVE_WIFI = 0x01,
893 WMI_VRING_ENC_TYPE_NONE = 0x02,
896 enum wmi_vring_cfg_ds_cfg {
897 WMI_VRING_DS_PBSS = 0x00,
898 WMI_VRING_DS_STATION = 0x01,
899 WMI_VRING_DS_AP = 0x02,
900 WMI_VRING_DS_ADDR4 = 0x03,
903 enum wmi_vring_cfg_nwifi_ds_trans_type {
904 WMI_NWIFI_TX_TRANS_MODE_NO = 0x00,
905 WMI_NWIFI_TX_TRANS_MODE_AP2PBSS = 0x01,
906 WMI_NWIFI_TX_TRANS_MODE_STA2PBSS = 0x02,
909 enum wmi_vring_cfg_schd_params_priority {
910 WMI_SCH_PRIO_REGULAR = 0x00,
911 WMI_SCH_PRIO_HIGH = 0x01,
914 #define CIDXTID_EXTENDED_CID_TID (0xFF)
915 #define CIDXTID_CID_POS (0)
916 #define CIDXTID_CID_LEN (4)
917 #define CIDXTID_CID_MSK (0xF)
918 #define CIDXTID_TID_POS (4)
919 #define CIDXTID_TID_LEN (4)
920 #define CIDXTID_TID_MSK (0xF0)
921 #define VRING_CFG_MAC_CTRL_LIFETIME_EN_POS (0)
922 #define VRING_CFG_MAC_CTRL_LIFETIME_EN_LEN (1)
923 #define VRING_CFG_MAC_CTRL_LIFETIME_EN_MSK (0x1)
924 #define VRING_CFG_MAC_CTRL_AGGR_EN_POS (1)
925 #define VRING_CFG_MAC_CTRL_AGGR_EN_LEN (1)
926 #define VRING_CFG_MAC_CTRL_AGGR_EN_MSK (0x2)
927 #define VRING_CFG_TO_RESOLUTION_VALUE_POS (0)
928 #define VRING_CFG_TO_RESOLUTION_VALUE_LEN (6)
929 #define VRING_CFG_TO_RESOLUTION_VALUE_MSK (0x3F)
931 struct wmi_vring_cfg {
932 struct wmi_sw_ring_cfg tx_sw_ring;
935 /* Used for cid less than 8. For higher cid set
936 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
942 u8 nwifi_ds_trans_type;
946 struct wmi_vring_cfg_schd schd_params;
947 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
949 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
951 /* Update the vring's priority for Qos purpose. Set to
952 * WMI_QOS_DEFAULT_PRIORITY to use MID's QoS priority
958 enum wmi_vring_cfg_cmd_action {
959 WMI_VRING_CMD_ADD = 0x00,
960 WMI_VRING_CMD_MODIFY = 0x01,
961 WMI_VRING_CMD_DELETE = 0x02,
964 /* WMI_VRING_CFG_CMDID */
965 struct wmi_vring_cfg_cmd {
967 struct wmi_vring_cfg vring_cfg;
970 struct wmi_bcast_vring_cfg {
971 struct wmi_sw_ring_cfg tx_sw_ring;
977 u8 nwifi_ds_trans_type;
980 /* WMI_BCAST_VRING_CFG_CMDID */
981 struct wmi_bcast_vring_cfg_cmd {
983 struct wmi_bcast_vring_cfg vring_cfg;
986 struct wmi_edma_ring_cfg {
987 __le64 ring_mem_base;
988 /* size in number of items */
994 enum wmi_rx_msg_type {
995 WMI_RX_MSG_TYPE_COMPRESSED = 0x00,
996 WMI_RX_MSG_TYPE_EXTENDED = 0x01,
999 enum wmi_ring_add_irq_mode {
1000 /* Backwards compatibility
1001 * for DESC ring - interrupt disabled
1002 * for STATUS ring - interrupt enabled
1004 WMI_RING_ADD_IRQ_MODE_BWC = 0x00,
1005 WMI_RING_ADD_IRQ_MODE_DISABLE = 0x01,
1006 WMI_RING_ADD_IRQ_MODE_ENABLE = 0x02,
1009 struct wmi_tx_status_ring_add_cmd {
1010 struct wmi_edma_ring_cfg ring_cfg;
1012 /* wmi_ring_add_irq_mode */
1017 struct wmi_rx_status_ring_add_cmd {
1018 struct wmi_edma_ring_cfg ring_cfg;
1020 /* wmi_rx_msg_type */
1025 struct wmi_cfg_def_rx_offload_cmd {
1026 __le16 max_msdu_size;
1027 __le16 max_rx_pl_per_desc;
1028 u8 decap_trans_type;
1029 u8 l2_802_3_offload_ctrl;
1030 u8 l2_nwifi_offload_ctrl;
1032 u8 nwifi_ds_trans_type;
1037 struct wmi_tx_desc_ring_add_cmd {
1038 struct wmi_edma_ring_cfg ring_cfg;
1039 __le16 max_msdu_size;
1040 /* Correlated status ring (0-63) */
1044 u8 encap_trans_type;
1049 /* wmi_ring_add_irq_mode */
1052 struct wmi_vring_cfg_schd schd_params;
1055 struct wmi_rx_desc_ring_add_cmd {
1056 struct wmi_edma_ring_cfg ring_cfg;
1058 /* 0-63 status rings */
1061 __le64 sw_tail_host_addr;
1064 struct wmi_bcast_desc_ring_add_cmd {
1065 struct wmi_edma_ring_cfg ring_cfg;
1066 __le16 max_msdu_size;
1067 /* Correlated status ring (0-63) */
1069 u8 encap_trans_type;
1073 /* WMI_LO_POWER_CALIB_FROM_OTP_CMDID */
1074 struct wmi_lo_power_calib_from_otp_cmd {
1075 /* index to read from OTP. zero based */
1080 /* WMI_LO_POWER_CALIB_FROM_OTP_EVENTID */
1081 struct wmi_lo_power_calib_from_otp_event {
1087 /* WMI_RING_BA_EN_CMDID */
1088 struct wmi_ring_ba_en_cmd {
1096 /* WMI_RING_BA_DIS_CMDID */
1097 struct wmi_ring_ba_dis_cmd {
1103 /* WMI_NOTIFY_REQ_CMDID */
1104 struct wmi_notify_req_cmd {
1109 __le32 interval_usec;
1116 /* WMI_CFG_RX_CHAIN_CMDID */
1117 enum wmi_sniffer_cfg_mode {
1118 WMI_SNIFFER_OFF = 0x00,
1119 WMI_SNIFFER_ON = 0x01,
1122 /* WMI_SILENT_RSSI_TABLE */
1123 enum wmi_silent_rssi_table {
1124 RF_TEMPERATURE_CALIB_DEFAULT_DB = 0x00,
1125 RF_TEMPERATURE_CALIB_HIGH_POWER_DB = 0x01,
1128 /* WMI_SILENT_RSSI_STATUS */
1129 enum wmi_silent_rssi_status {
1130 SILENT_RSSI_SUCCESS = 0x00,
1131 SILENT_RSSI_FAILURE = 0x01,
1134 /* WMI_SET_ACTIVE_SILENT_RSSI_TABLE_CMDID */
1135 struct wmi_set_active_silent_rssi_table_cmd {
1136 /* enum wmi_silent_rssi_table */
1140 enum wmi_sniffer_cfg_phy_info_mode {
1141 WMI_SNIFFER_PHY_INFO_DISABLED = 0x00,
1142 WMI_SNIFFER_PHY_INFO_ENABLED = 0x01,
1145 enum wmi_sniffer_cfg_phy_support {
1146 WMI_SNIFFER_CP = 0x00,
1147 WMI_SNIFFER_DP = 0x01,
1148 WMI_SNIFFER_BOTH_PHYS = 0x02,
1151 /* wmi_sniffer_cfg */
1152 struct wmi_sniffer_cfg {
1153 /* enum wmi_sniffer_cfg_mode */
1155 /* enum wmi_sniffer_cfg_phy_info_mode */
1156 __le32 phy_info_mode;
1157 /* enum wmi_sniffer_cfg_phy_support */
1163 enum wmi_cfg_rx_chain_cmd_action {
1164 WMI_RX_CHAIN_ADD = 0x00,
1165 WMI_RX_CHAIN_DEL = 0x01,
1168 enum wmi_cfg_rx_chain_cmd_decap_trans_type {
1169 WMI_DECAP_TYPE_802_3 = 0x00,
1170 WMI_DECAP_TYPE_NATIVE_WIFI = 0x01,
1171 WMI_DECAP_TYPE_NONE = 0x02,
1174 enum wmi_cfg_rx_chain_cmd_nwifi_ds_trans_type {
1175 WMI_NWIFI_RX_TRANS_MODE_NO = 0x00,
1176 WMI_NWIFI_RX_TRANS_MODE_PBSS2AP = 0x01,
1177 WMI_NWIFI_RX_TRANS_MODE_PBSS2STA = 0x02,
1180 enum wmi_cfg_rx_chain_cmd_reorder_type {
1181 WMI_RX_HW_REORDER = 0x00,
1182 WMI_RX_SW_REORDER = 0x01,
1185 #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_POS (0)
1186 #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_LEN (1)
1187 #define L2_802_3_OFFLOAD_CTRL_VLAN_TAG_INSERTION_MSK (0x1)
1188 #define L2_802_3_OFFLOAD_CTRL_SNAP_KEEP_POS (1)
1189 #define L2_802_3_OFFLOAD_CTRL_SNAP_KEEP_LEN (1)
1190 #define L2_802_3_OFFLOAD_CTRL_SNAP_KEEP_MSK (0x2)
1191 #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_POS (0)
1192 #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_LEN (1)
1193 #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_QOS_MSK (0x1)
1194 #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_POS (1)
1195 #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_LEN (1)
1196 #define L2_NWIFI_OFFLOAD_CTRL_REMOVE_PN_MSK (0x2)
1197 #define L3_L4_CTRL_IPV4_CHECKSUM_EN_POS (0)
1198 #define L3_L4_CTRL_IPV4_CHECKSUM_EN_LEN (1)
1199 #define L3_L4_CTRL_IPV4_CHECKSUM_EN_MSK (0x1)
1200 #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_POS (1)
1201 #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_LEN (1)
1202 #define L3_L4_CTRL_TCPIP_CHECKSUM_EN_MSK (0x2)
1203 #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_POS (0)
1204 #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_LEN (1)
1205 #define RING_CTRL_OVERRIDE_PREFETCH_THRSH_MSK (0x1)
1206 #define RING_CTRL_OVERRIDE_WB_THRSH_POS (1)
1207 #define RING_CTRL_OVERRIDE_WB_THRSH_LEN (1)
1208 #define RING_CTRL_OVERRIDE_WB_THRSH_MSK (0x2)
1209 #define RING_CTRL_OVERRIDE_ITR_THRSH_POS (2)
1210 #define RING_CTRL_OVERRIDE_ITR_THRSH_LEN (1)
1211 #define RING_CTRL_OVERRIDE_ITR_THRSH_MSK (0x4)
1212 #define RING_CTRL_OVERRIDE_HOST_THRSH_POS (3)
1213 #define RING_CTRL_OVERRIDE_HOST_THRSH_LEN (1)
1214 #define RING_CTRL_OVERRIDE_HOST_THRSH_MSK (0x8)
1216 /* WMI_CFG_RX_CHAIN_CMDID */
1217 struct wmi_cfg_rx_chain_cmd {
1219 struct wmi_sw_ring_cfg rx_sw_ring;
1221 u8 decap_trans_type;
1222 u8 l2_802_3_offload_ctrl;
1223 u8 l2_nwifi_offload_ctrl;
1225 u8 nwifi_ds_trans_type;
1228 __le16 prefetch_thrsh;
1234 struct wmi_sniffer_cfg sniffer_cfg;
1235 __le16 max_rx_pl_per_desc;
1238 /* WMI_RCP_ADDBA_RESP_CMDID */
1239 struct wmi_rcp_addba_resp_cmd {
1240 /* Used for cid less than 8. For higher cid set
1241 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
1246 /* ieee80211_ba_parameterset field to send */
1247 __le16 ba_param_set;
1249 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
1251 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
1256 /* WMI_RCP_ADDBA_RESP_EDMA_CMDID */
1257 struct wmi_rcp_addba_resp_edma_cmd {
1263 /* ieee80211_ba_parameterset field to send */
1264 __le16 ba_param_set;
1267 /* wmi_cfg_rx_chain_cmd_reorder_type */
1271 /* WMI_RCP_DELBA_CMDID */
1272 struct wmi_rcp_delba_cmd {
1273 /* Used for cid less than 8. For higher cid set
1274 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
1279 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
1281 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
1286 /* WMI_RCP_ADDBA_REQ_CMDID */
1287 struct wmi_rcp_addba_req_cmd {
1288 /* Used for cid less than 8. For higher cid set
1289 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
1293 /* ieee80211_ba_parameterset field as it received */
1294 __le16 ba_param_set;
1296 /* ieee80211_ba_seqstrl field as it received */
1298 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
1300 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
1305 /* WMI_SET_MAC_ADDRESS_CMDID */
1306 struct wmi_set_mac_address_cmd {
1307 u8 mac[WMI_MAC_LEN];
1313 * Returned event: WMI_ECHO_RSP_EVENTID
1315 struct wmi_echo_cmd {
1319 /* WMI_DEEP_ECHO_CMDID
1320 * Check FW and uCode is alive
1321 * Returned event: WMI_DEEP_ECHO_RSP_EVENTID
1323 struct wmi_deep_echo_cmd {
1327 /* WMI_RF_PWR_ON_DELAY_CMDID
1328 * set FW time parameters used through RF resetting
1329 * RF reset consists of bringing its power down for a period of time, then
1330 * bringing the power up
1331 * Returned event: WMI_RF_PWR_ON_DELAY_RSP_EVENTID
1333 struct wmi_rf_pwr_on_delay_cmd {
1334 /* time in usec the FW waits after bringing the RF PWR down,
1337 __le16 down_delay_usec;
1338 /* time in usec the FW waits after bringing the RF PWR up,
1341 __le16 up_delay_usec;
1344 /* WMI_SET_HIGH_POWER_TABLE_PARAMS_CMDID
1345 * This API controls the Tx and Rx gain over temperature.
1346 * It controls the Tx D-type, Rx D-type and Rx E-type amplifiers.
1347 * It also controls the Tx gain index, by controlling the Rx to Tx gain index
1349 * The control is divided by 3 temperature values to 4 temperature ranges.
1350 * Each parameter uses its own temperature values.
1351 * Returned event: WMI_SET_HIGH_POWER_TABLE_PARAMS_EVENTID
1353 struct wmi_set_high_power_table_params_cmd {
1354 /* Temperature range for Tx D-type parameters */
1355 u8 tx_dtype_temp[WMI_RF_DTYPE_LENGTH];
1357 /* Tx D-type values to be used for each temperature range */
1358 __le32 tx_dtype_conf[WMI_RF_DTYPE_CONF_LENGTH];
1359 /* Temperature range for Tx E-type parameters */
1360 u8 tx_etype_temp[WMI_RF_ETYPE_LENGTH];
1362 /* Tx E-type values to be used for each temperature range.
1363 * The last 4 values of any range are the first 4 values of the next
1366 __le32 tx_etype_conf[WMI_RF_ETYPE_CONF_LENGTH];
1367 /* Temperature range for Rx D-type parameters */
1368 u8 rx_dtype_temp[WMI_RF_DTYPE_LENGTH];
1370 /* Rx D-type values to be used for each temperature range */
1371 __le32 rx_dtype_conf[WMI_RF_DTYPE_CONF_LENGTH];
1372 /* Temperature range for Rx E-type parameters */
1373 u8 rx_etype_temp[WMI_RF_ETYPE_LENGTH];
1375 /* Rx E-type values to be used for each temperature range.
1376 * The last 4 values of any range are the first 4 values of the next
1379 __le32 rx_etype_conf[WMI_RF_ETYPE_CONF_LENGTH];
1380 /* Temperature range for rx_2_tx_offs parameters */
1381 u8 rx_2_tx_temp[WMI_RF_RX2TX_LENGTH];
1383 /* Rx to Tx gain index offset */
1384 s8 rx_2_tx_offs[WMI_RF_RX2TX_CONF_LENGTH];
1387 /* WMI_FIXED_SCHEDULING_UL_CONFIG_CMDID
1388 * This API sets rd parameter per mcs.
1389 * Relevant only in Fixed Scheduling mode.
1390 * Returned event: WMI_FIXED_SCHEDULING_UL_CONFIG_EVENTID
1392 struct wmi_fixed_scheduling_ul_config_cmd {
1393 /* Use mcs -1 to set for every mcs */
1395 /* Number of frames with rd bit set in a single virtual slot */
1396 u8 rd_count_per_slot;
1400 /* CMD: WMI_RF_XPM_READ_CMDID */
1401 struct wmi_rf_xpm_read_cmd {
1404 /* XPM bit start address in range [0,8191]bits - rounded by FW to
1407 __le32 xpm_bit_address;
1411 /* CMD: WMI_RF_XPM_WRITE_CMDID */
1412 struct wmi_rf_xpm_write_cmd {
1415 /* XPM bit start address in range [0,8191]bits - rounded by FW to
1418 __le32 xpm_bit_address;
1420 /* boolean flag indicating whether FW should verify the write
1425 /* actual size=num_bytes */
1429 /* Possible modes for temperature measurement */
1430 enum wmi_temperature_measure_mode {
1431 TEMPERATURE_USE_OLD_VALUE = 0x01,
1432 TEMPERATURE_MEASURE_NOW = 0x02,
1435 /* WMI_TEMP_SENSE_CMDID */
1436 struct wmi_temp_sense_cmd {
1437 __le32 measure_baseband_en;
1438 __le32 measure_rf_en;
1439 __le32 measure_mode;
1443 WMI_PMC_ALLOCATE = 0x00,
1444 WMI_PMC_RELEASE = 0x01,
1448 struct wmi_pmc_cmd {
1449 /* enum wmi_pmc_cmd_op_type */
1456 enum wmi_aoa_meas_type {
1457 WMI_AOA_PHASE_MEAS = 0x00,
1458 WMI_AOA_PHASE_AMP_MEAS = 0x01,
1461 /* WMI_AOA_MEAS_CMDID */
1462 struct wmi_aoa_meas_cmd {
1463 u8 mac_addr[WMI_MAC_LEN];
1470 /* enum wmi_aoa_meas_type */
1472 __le32 meas_rf_mask;
1475 /* WMI_SET_MGMT_RETRY_LIMIT_CMDID */
1476 struct wmi_set_mgmt_retry_limit_cmd {
1477 /* MAC retransmit limit for mgmt frames */
1478 u8 mgmt_retry_limit;
1479 /* alignment to 32b */
1483 /* Zones: HIGH, MAX, CRITICAL */
1484 #define WMI_NUM_OF_TT_ZONES (3)
1486 struct wmi_tt_zone_limits {
1487 /* Above this temperature this zone is active */
1488 u8 temperature_high;
1489 /* Below this temperature the adjacent lower zone is active */
1494 /* Struct used for both configuration and status commands of thermal
1497 struct wmi_tt_data {
1498 /* Enable/Disable TT algorithm for baseband */
1501 /* Define zones for baseband */
1502 struct wmi_tt_zone_limits bb_zones[WMI_NUM_OF_TT_ZONES];
1503 /* Enable/Disable TT algorithm for radio */
1506 /* Define zones for all radio chips */
1507 struct wmi_tt_zone_limits rf_zones[WMI_NUM_OF_TT_ZONES];
1510 /* WMI_SET_THERMAL_THROTTLING_CFG_CMDID */
1511 struct wmi_set_thermal_throttling_cfg_cmd {
1513 struct wmi_tt_data tt_data;
1516 /* WMI_NEW_STA_CMDID */
1517 struct wmi_new_sta_cmd {
1518 u8 dst_mac[WMI_MAC_LEN];
1522 /* WMI_DEL_STA_CMDID */
1523 struct wmi_del_sta_cmd {
1524 u8 dst_mac[WMI_MAC_LEN];
1525 __le16 disconnect_reason;
1528 enum wmi_tof_burst_duration {
1529 WMI_TOF_BURST_DURATION_250_USEC = 2,
1530 WMI_TOF_BURST_DURATION_500_USEC = 3,
1531 WMI_TOF_BURST_DURATION_1_MSEC = 4,
1532 WMI_TOF_BURST_DURATION_2_MSEC = 5,
1533 WMI_TOF_BURST_DURATION_4_MSEC = 6,
1534 WMI_TOF_BURST_DURATION_8_MSEC = 7,
1535 WMI_TOF_BURST_DURATION_16_MSEC = 8,
1536 WMI_TOF_BURST_DURATION_32_MSEC = 9,
1537 WMI_TOF_BURST_DURATION_64_MSEC = 10,
1538 WMI_TOF_BURST_DURATION_128_MSEC = 11,
1539 WMI_TOF_BURST_DURATION_NO_PREFERENCES = 15,
1542 enum wmi_tof_session_start_flags {
1543 WMI_TOF_SESSION_START_FLAG_SECURED = 0x1,
1544 WMI_TOF_SESSION_START_FLAG_ASAP = 0x2,
1545 WMI_TOF_SESSION_START_FLAG_LCI_REQ = 0x4,
1546 WMI_TOF_SESSION_START_FLAG_LCR_REQ = 0x8,
1549 /* WMI_TOF_SESSION_START_CMDID */
1550 struct wmi_ftm_dest_info {
1552 /* wmi_tof_session_start_flags_e */
1555 u8 num_of_ftm_per_burst;
1556 u8 num_of_bursts_exp;
1557 /* wmi_tof_burst_duration_e */
1559 /* Burst Period indicate interval between two consecutive burst
1560 * instances, in units of 100 ms
1562 __le16 burst_period;
1563 u8 dst_mac[WMI_MAC_LEN];
1565 u8 num_burst_per_aoa_meas;
1568 /* WMI_TOF_SESSION_START_CMDID */
1569 struct wmi_tof_session_start_cmd {
1575 struct wmi_ftm_dest_info ftm_dest_info[];
1578 /* WMI_TOF_CFG_RESPONDER_CMDID */
1579 struct wmi_tof_cfg_responder_cmd {
1584 enum wmi_tof_channel_info_report_type {
1585 WMI_TOF_CHANNEL_INFO_TYPE_CIR = 0x1,
1586 WMI_TOF_CHANNEL_INFO_TYPE_RSSI = 0x2,
1587 WMI_TOF_CHANNEL_INFO_TYPE_SNR = 0x4,
1588 WMI_TOF_CHANNEL_INFO_TYPE_DEBUG_DATA = 0x8,
1589 WMI_TOF_CHANNEL_INFO_TYPE_VENDOR_SPECIFIC = 0x10,
1592 /* WMI_TOF_CHANNEL_INFO_CMDID */
1593 struct wmi_tof_channel_info_cmd {
1594 /* wmi_tof_channel_info_report_type_e */
1595 __le32 channel_info_report_request;
1598 /* WMI_TOF_SET_TX_RX_OFFSET_CMDID */
1599 struct wmi_tof_set_tx_rx_offset_cmd {
1600 /* TX delay offset */
1602 /* RX delay offset */
1604 /* Mask to define which RFs to configure. 0 means all RFs */
1606 /* Offset to strongest tap of CIR */
1610 /* WMI_TOF_GET_TX_RX_OFFSET_CMDID */
1611 struct wmi_tof_get_tx_rx_offset_cmd {
1612 /* rf index to read offsets from */
1617 /* WMI_FIXED_SCHEDULING_CONFIG_CMDID */
1618 struct wmi_map_mcs_to_schd_params {
1620 /* time in usec from start slot to start tx flow - default 15 */
1621 u8 time_in_usec_before_initiate_tx;
1622 /* RD enable - if yes consider RD according to STA mcs */
1625 /* time in usec from start slot to stop vring */
1626 __le16 time_in_usec_to_stop_vring;
1627 /* timeout to force flush from start of slot */
1628 __le16 flush_to_in_usec;
1629 /* per mcs the mac buffer limit size in bytes */
1630 __le32 mac_buff_size_in_bytes;
1633 /* WMI_FIXED_SCHEDULING_CONFIG_COMPLETE_EVENTID */
1634 struct wmi_fixed_scheduling_config_complete_event {
1640 /* This value exists for backwards compatibility only.
1641 * Do not use it in new commands.
1642 * Use dynamic arrays where possible.
1644 #define WMI_NUM_MCS (13)
1646 /* WMI_FIXED_SCHEDULING_CONFIG_CMDID */
1647 struct wmi_fixed_scheduling_config_cmd {
1648 /* defaults in the SAS table */
1649 struct wmi_map_mcs_to_schd_params mcs_to_schd_params_map[WMI_NUM_MCS];
1650 /* default 150 uSec */
1651 __le16 max_sta_rd_ppdu_duration_in_usec;
1652 /* default 300 uSec */
1653 __le16 max_sta_grant_ppdu_duration_in_usec;
1654 /* default 1000 uSec */
1655 __le16 assoc_slot_duration_in_usec;
1656 /* default 360 uSec */
1657 __le16 virtual_slot_duration_in_usec;
1658 /* each this field value slots start with grant frame to the station
1661 u8 number_of_ap_slots_for_initiate_grant;
1665 /* WMI_ENABLE_FIXED_SCHEDULING_CMDID */
1666 struct wmi_enable_fixed_scheduling_cmd {
1670 /* WMI_ENABLE_FIXED_SCHEDULING_COMPLETE_EVENTID */
1671 struct wmi_enable_fixed_scheduling_complete_event {
1677 /* WMI_SET_MULTI_DIRECTED_OMNIS_CONFIG_CMDID */
1678 struct wmi_set_multi_directed_omnis_config_cmd {
1679 /* number of directed omnis at destination AP */
1680 u8 dest_ap_num_directed_omnis;
1684 /* WMI_SET_MULTI_DIRECTED_OMNIS_CONFIG_EVENTID */
1685 struct wmi_set_multi_directed_omnis_config_event {
1691 /* WMI_RADAR_GENERAL_CONFIG_EVENTID */
1692 struct wmi_radar_general_config_event {
1698 /* WMI_RADAR_CONFIG_SELECT_EVENTID */
1699 struct wmi_radar_config_select_event {
1703 /* In unit of bytes */
1705 /* In unit of bytes */
1709 /* WMI_RADAR_PARAMS_CONFIG_EVENTID */
1710 struct wmi_radar_params_config_event {
1716 /* WMI_RADAR_SET_MODE_EVENTID */
1717 struct wmi_radar_set_mode_event {
1723 /* WMI_RADAR_CONTROL_EVENTID */
1724 struct wmi_radar_control_event {
1730 /* WMI_RADAR_PCI_CONTROL_EVENTID */
1731 struct wmi_radar_pci_control_event {
1737 /* WMI_SET_LONG_RANGE_CONFIG_CMDID */
1738 struct wmi_set_long_range_config_cmd {
1742 /* WMI_SET_LONG_RANGE_CONFIG_COMPLETE_EVENTID */
1743 struct wmi_set_long_range_config_complete_event {
1749 /* payload max size is 1024 bytes: max event buffer size (1044) - WMI headers
1750 * (16) - prev struct field size (4)
1752 #define WMI_MAX_IOCTL_PAYLOAD_SIZE (1024)
1753 #define WMI_MAX_IOCTL_REPLY_PAYLOAD_SIZE (1024)
1754 #define WMI_MAX_INTERNAL_EVENT_PAYLOAD_SIZE (1024)
1756 enum wmi_internal_fw_ioctl_code {
1757 WMI_INTERNAL_FW_CODE_NONE = 0x0,
1758 WMI_INTERNAL_FW_CODE_QCOM = 0x1,
1761 /* WMI_INTERNAL_FW_IOCTL_CMDID */
1762 struct wmi_internal_fw_ioctl_cmd {
1763 /* enum wmi_internal_fw_ioctl_code */
1766 /* payload max size is WMI_MAX_IOCTL_PAYLOAD_SIZE
1767 * Must be the last member of the struct
1772 /* WMI_INTERNAL_FW_IOCTL_EVENTID */
1773 struct wmi_internal_fw_ioctl_event {
1778 /* payload max size is WMI_MAX_IOCTL_REPLY_PAYLOAD_SIZE
1779 * Must be the last member of the struct
1784 /* WMI_INTERNAL_FW_EVENT_EVENTID */
1785 struct wmi_internal_fw_event_event {
1788 /* payload max size is WMI_MAX_INTERNAL_EVENT_PAYLOAD_SIZE
1789 * Must be the last member of the struct
1794 /* WMI_SET_VRING_PRIORITY_WEIGHT_CMDID */
1795 struct wmi_set_vring_priority_weight_cmd {
1796 /* Array of weights. Valid values are
1797 * WMI_QOS_MIN_DEFAULT_WEIGHT...WMI_QOS_MAX_WEIGHT. Weight #0 is
1798 * hard-coded WMI_QOS_MIN_WEIGHT. This array provide the weights
1805 /* WMI_SET_VRING_PRIORITY_CMDID */
1806 struct wmi_vring_priority {
1808 /* Weight index. Valid value is 0-3 */
1813 /* WMI_SET_VRING_PRIORITY_CMDID */
1814 struct wmi_set_vring_priority_cmd {
1815 /* number of entries in vring_priority. Set to
1816 * WMI_QOS_SET_VIF_PRIORITY to update the VIF's priority, and there
1817 * will be only one entry in vring_priority
1821 struct wmi_vring_priority vring_priority[];
1824 /* WMI_BF_CONTROL_CMDID - deprecated */
1825 struct wmi_bf_control_cmd {
1826 /* wmi_bf_triggers */
1829 /* DISABLED = 0, ENABLED = 1 , DRY_RUN = 2 */
1831 /* DISABLED = 0, ENABLED = 1, DRY_RUN = 2 */
1833 /* Max cts threshold (correspond to
1834 * WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_TXOP)
1836 u8 bf_trigger_max_cts_failure_thr;
1837 /* Max cts threshold in dense (correspond to
1838 * WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_TXOP)
1840 u8 bf_trigger_max_cts_failure_dense_thr;
1841 /* Max b-ack threshold (correspond to
1842 * WMI_BF_TRIGGER_MAX_BACK_FAILURE)
1844 u8 bf_trigger_max_back_failure_thr;
1845 /* Max b-ack threshold in dense (correspond to
1846 * WMI_BF_TRIGGER_MAX_BACK_FAILURE)
1848 u8 bf_trigger_max_back_failure_dense_thr;
1850 /* Wrong sectors threshold */
1851 __le32 wrong_sector_bis_thr;
1852 /* BOOL to enable/disable long term trigger */
1853 u8 long_term_enable;
1854 /* 1 = Update long term thresholds from the long_term_mbps_th_tbl and
1855 * long_term_trig_timeout_per_mcs arrays, 0 = Ignore
1857 u8 long_term_update_thr;
1858 /* Long term throughput threshold [Mbps] */
1859 u8 long_term_mbps_th_tbl[WMI_NUM_MCS];
1861 /* Long term timeout threshold table [msec] */
1862 __le16 long_term_trig_timeout_per_mcs[WMI_NUM_MCS];
1866 /* BF configuration for each MCS */
1867 struct wmi_bf_control_ex_mcs {
1868 /* Long term throughput threshold [Mbps] */
1869 u8 long_term_mbps_th_tbl;
1871 /* Long term timeout threshold table [msec] */
1872 __le16 long_term_trig_timeout_per_mcs;
1875 /* WMI_BF_CONTROL_EX_CMDID */
1876 struct wmi_bf_control_ex_cmd {
1877 /* wmi_bf_triggers */
1879 /* enum wmi_edmg_tx_mode */
1881 /* DISABLED = 0, ENABLED = 1 , DRY_RUN = 2 */
1883 /* DISABLED = 0, ENABLED = 1, DRY_RUN = 2 */
1885 /* Max cts threshold (correspond to
1886 * WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_TXOP)
1888 u8 bf_trigger_max_cts_failure_thr;
1889 /* Max cts threshold in dense (correspond to
1890 * WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_TXOP)
1892 u8 bf_trigger_max_cts_failure_dense_thr;
1893 /* Max b-ack threshold (correspond to
1894 * WMI_BF_TRIGGER_MAX_BACK_FAILURE)
1896 u8 bf_trigger_max_back_failure_thr;
1897 /* Max b-ack threshold in dense (correspond to
1898 * WMI_BF_TRIGGER_MAX_BACK_FAILURE)
1900 u8 bf_trigger_max_back_failure_dense_thr;
1902 /* Wrong sectors threshold */
1903 __le32 wrong_sector_bis_thr;
1904 /* BOOL to enable/disable long term trigger */
1905 u8 long_term_enable;
1906 /* 1 = Update long term thresholds from the long_term_mbps_th_tbl and
1907 * long_term_trig_timeout_per_mcs arrays, 0 = Ignore
1909 u8 long_term_update_thr;
1910 u8 each_mcs_cfg_size;
1912 /* Configuration for each MCS */
1913 struct wmi_bf_control_ex_mcs each_mcs_cfg[];
1916 /* WMI_LINK_STATS_CMD */
1917 enum wmi_link_stats_action {
1918 WMI_LINK_STATS_SNAPSHOT = 0x00,
1919 WMI_LINK_STATS_PERIODIC = 0x01,
1920 WMI_LINK_STATS_STOP_PERIODIC = 0x02,
1923 /* WMI_LINK_STATS_EVENT record identifiers */
1924 enum wmi_link_stats_record_type {
1925 WMI_LINK_STATS_TYPE_BASIC = 0x01,
1926 WMI_LINK_STATS_TYPE_GLOBAL = 0x02,
1929 /* WMI_LINK_STATS_CMDID */
1930 struct wmi_link_stats_cmd {
1931 /* bitmask of required record types
1932 * (wmi_link_stats_record_type_e)
1934 __le32 record_type_mask;
1935 /* 0xff for all cids */
1937 /* wmi_link_stats_action_e */
1940 /* range = 100 - 10000 */
1941 __le32 interval_msec;
1944 /* WMI_SET_GRANT_MCS_CMDID */
1945 struct wmi_set_grant_mcs_cmd {
1950 /* WMI_SET_AP_SLOT_SIZE_CMDID */
1951 struct wmi_set_ap_slot_size_cmd {
1955 /* WMI_TEMP_SENSE_ALL_CMDID */
1956 struct wmi_temp_sense_all_cmd {
1957 u8 measure_baseband_en;
1964 * List of Events (target to host)
1967 WMI_READY_EVENTID = 0x1001,
1968 WMI_CONNECT_EVENTID = 0x1002,
1969 WMI_DISCONNECT_EVENTID = 0x1003,
1970 WMI_START_SCHED_SCAN_EVENTID = 0x1005,
1971 WMI_STOP_SCHED_SCAN_EVENTID = 0x1006,
1972 WMI_SCHED_SCAN_RESULT_EVENTID = 0x1007,
1973 WMI_SCAN_COMPLETE_EVENTID = 0x100A,
1974 WMI_REPORT_STATISTICS_EVENTID = 0x100B,
1975 WMI_FT_AUTH_STATUS_EVENTID = 0x100C,
1976 WMI_FT_REASSOC_STATUS_EVENTID = 0x100D,
1977 WMI_LINK_MONITOR_EVENTID = 0x100E,
1978 WMI_RADAR_GENERAL_CONFIG_EVENTID = 0x1100,
1979 WMI_RADAR_CONFIG_SELECT_EVENTID = 0x1101,
1980 WMI_RADAR_PARAMS_CONFIG_EVENTID = 0x1102,
1981 WMI_RADAR_SET_MODE_EVENTID = 0x1103,
1982 WMI_RADAR_CONTROL_EVENTID = 0x1104,
1983 WMI_RADAR_PCI_CONTROL_EVENTID = 0x1105,
1984 WMI_RD_MEM_RSP_EVENTID = 0x1800,
1985 WMI_FW_READY_EVENTID = 0x1801,
1986 WMI_EXIT_FAST_MEM_ACC_MODE_EVENTID = 0x200,
1987 WMI_ECHO_RSP_EVENTID = 0x1803,
1988 WMI_DEEP_ECHO_RSP_EVENTID = 0x1804,
1990 WMI_FS_TUNE_DONE_EVENTID = 0x180A,
1992 WMI_CORR_MEASURE_EVENTID = 0x180B,
1993 WMI_READ_RSSI_EVENTID = 0x180C,
1994 WMI_TEMP_SENSE_DONE_EVENTID = 0x180E,
1995 WMI_DC_CALIB_DONE_EVENTID = 0x180F,
1997 WMI_IQ_TX_CALIB_DONE_EVENTID = 0x1811,
1999 WMI_IQ_RX_CALIB_DONE_EVENTID = 0x1812,
2000 WMI_SET_WORK_MODE_DONE_EVENTID = 0x1815,
2001 WMI_LO_LEAKAGE_CALIB_DONE_EVENTID = 0x1816,
2002 WMI_LO_POWER_CALIB_FROM_OTP_EVENTID = 0x1817,
2003 WMI_SILENT_RSSI_CALIB_DONE_EVENTID = 0x181D,
2005 WMI_RF_RX_TEST_DONE_EVENTID = 0x181E,
2006 WMI_CFG_RX_CHAIN_DONE_EVENTID = 0x1820,
2007 WMI_VRING_CFG_DONE_EVENTID = 0x1821,
2008 WMI_BA_STATUS_EVENTID = 0x1823,
2009 WMI_RCP_ADDBA_REQ_EVENTID = 0x1824,
2010 WMI_RCP_ADDBA_RESP_SENT_EVENTID = 0x1825,
2011 WMI_DELBA_EVENTID = 0x1826,
2012 WMI_GET_SSID_EVENTID = 0x1828,
2013 WMI_GET_PCP_CHANNEL_EVENTID = 0x182A,
2014 /* Event is shared between WMI_SW_TX_REQ_CMDID and
2015 * WMI_SW_TX_REQ_EXT_CMDID
2017 WMI_SW_TX_COMPLETE_EVENTID = 0x182B,
2018 WMI_BEAMFORMING_MGMT_DONE_EVENTID = 0x1836,
2019 WMI_BF_TXSS_MGMT_DONE_EVENTID = 0x1837,
2020 WMI_BF_RXSS_MGMT_DONE_EVENTID = 0x1839,
2021 WMI_BF_TRIG_EVENTID = 0x183A,
2022 WMI_RS_MGMT_DONE_EVENTID = 0x1852,
2023 WMI_RF_MGMT_STATUS_EVENTID = 0x1853,
2024 WMI_BF_SM_MGMT_DONE_EVENTID = 0x1838,
2025 WMI_RX_MGMT_PACKET_EVENTID = 0x1840,
2026 WMI_TX_MGMT_PACKET_EVENTID = 0x1841,
2027 WMI_LINK_MAINTAIN_CFG_WRITE_DONE_EVENTID = 0x1842,
2028 WMI_LINK_MAINTAIN_CFG_READ_DONE_EVENTID = 0x1843,
2029 WMI_SET_LINK_MONITOR_EVENTID = 0x1845,
2030 WMI_RF_XPM_READ_RESULT_EVENTID = 0x1856,
2031 WMI_RF_XPM_WRITE_RESULT_EVENTID = 0x1857,
2032 WMI_LED_CFG_DONE_EVENTID = 0x1858,
2033 WMI_SET_SILENT_RSSI_TABLE_DONE_EVENTID = 0x185C,
2034 WMI_RF_PWR_ON_DELAY_RSP_EVENTID = 0x185D,
2035 WMI_SET_HIGH_POWER_TABLE_PARAMS_EVENTID = 0x185E,
2036 WMI_FIXED_SCHEDULING_UL_CONFIG_EVENTID = 0x185F,
2037 /* Performance monitoring events */
2038 WMI_DATA_PORT_OPEN_EVENTID = 0x1860,
2039 WMI_WBE_LINK_DOWN_EVENTID = 0x1861,
2040 WMI_BF_CTRL_DONE_EVENTID = 0x1862,
2041 WMI_NOTIFY_REQ_DONE_EVENTID = 0x1863,
2042 WMI_GET_STATUS_DONE_EVENTID = 0x1864,
2043 WMI_RING_EN_EVENTID = 0x1865,
2044 WMI_GET_RF_STATUS_EVENTID = 0x1866,
2045 WMI_GET_BASEBAND_TYPE_EVENTID = 0x1867,
2046 WMI_VRING_SWITCH_TIMING_CONFIG_EVENTID = 0x1868,
2047 WMI_UNIT_TEST_EVENTID = 0x1900,
2048 WMI_FLASH_READ_DONE_EVENTID = 0x1902,
2049 WMI_FLASH_WRITE_DONE_EVENTID = 0x1903,
2050 /* Power management */
2051 WMI_TRAFFIC_SUSPEND_EVENTID = 0x1904,
2052 WMI_TRAFFIC_RESUME_EVENTID = 0x1905,
2054 WMI_P2P_CFG_DONE_EVENTID = 0x1910,
2055 WMI_PORT_ALLOCATED_EVENTID = 0x1911,
2056 WMI_PORT_DELETED_EVENTID = 0x1912,
2057 WMI_LISTEN_STARTED_EVENTID = 0x1914,
2058 WMI_SEARCH_STARTED_EVENTID = 0x1915,
2059 WMI_DISCOVERY_STARTED_EVENTID = 0x1916,
2060 WMI_DISCOVERY_STOPPED_EVENTID = 0x1917,
2061 WMI_PCP_STARTED_EVENTID = 0x1918,
2062 WMI_PCP_STOPPED_EVENTID = 0x1919,
2063 WMI_PCP_FACTOR_EVENTID = 0x191A,
2064 /* Power Save Configuration Events */
2065 WMI_PS_DEV_PROFILE_CFG_EVENTID = 0x191C,
2066 WMI_RS_ENABLE_EVENTID = 0x191E,
2067 WMI_RS_CFG_EX_EVENTID = 0x191F,
2068 WMI_GET_DETAILED_RS_RES_EX_EVENTID = 0x1920,
2070 WMI_RS_CFG_DONE_EVENTID = 0x1921,
2072 WMI_GET_DETAILED_RS_RES_EVENTID = 0x1922,
2073 WMI_AOA_MEAS_EVENTID = 0x1923,
2074 WMI_BRP_SET_ANT_LIMIT_EVENTID = 0x1924,
2075 WMI_SET_MGMT_RETRY_LIMIT_EVENTID = 0x1930,
2076 WMI_GET_MGMT_RETRY_LIMIT_EVENTID = 0x1931,
2077 WMI_SET_THERMAL_THROTTLING_CFG_EVENTID = 0x1940,
2078 WMI_GET_THERMAL_THROTTLING_CFG_EVENTID = 0x1941,
2079 /* return the Power Save profile */
2080 WMI_PS_DEV_PROFILE_CFG_READ_EVENTID = 0x1942,
2081 WMI_TSF_SYNC_STATUS_EVENTID = 0x1973,
2082 WMI_TOF_SESSION_END_EVENTID = 0x1991,
2083 WMI_TOF_GET_CAPABILITIES_EVENTID = 0x1992,
2084 WMI_TOF_SET_LCR_EVENTID = 0x1993,
2085 WMI_TOF_SET_LCI_EVENTID = 0x1994,
2086 WMI_TOF_FTM_PER_DEST_RES_EVENTID = 0x1995,
2087 WMI_TOF_CFG_RESPONDER_EVENTID = 0x1996,
2088 WMI_TOF_SET_TX_RX_OFFSET_EVENTID = 0x1997,
2089 WMI_TOF_GET_TX_RX_OFFSET_EVENTID = 0x1998,
2090 WMI_TOF_CHANNEL_INFO_EVENTID = 0x1999,
2091 WMI_GET_RF_SECTOR_PARAMS_DONE_EVENTID = 0x19A0,
2092 WMI_SET_RF_SECTOR_PARAMS_DONE_EVENTID = 0x19A1,
2093 WMI_GET_SELECTED_RF_SECTOR_INDEX_DONE_EVENTID = 0x19A2,
2094 WMI_SET_SELECTED_RF_SECTOR_INDEX_DONE_EVENTID = 0x19A3,
2095 WMI_SET_RF_SECTOR_ON_DONE_EVENTID = 0x19A4,
2096 WMI_PRIO_TX_SECTORS_ORDER_EVENTID = 0x19A5,
2097 WMI_PRIO_TX_SECTORS_NUMBER_EVENTID = 0x19A6,
2098 WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID = 0x19A7,
2100 WMI_BF_CONTROL_EVENTID = 0x19AA,
2101 WMI_BF_CONTROL_EX_EVENTID = 0x19AB,
2102 WMI_TX_STATUS_RING_CFG_DONE_EVENTID = 0x19C0,
2103 WMI_RX_STATUS_RING_CFG_DONE_EVENTID = 0x19C1,
2104 WMI_TX_DESC_RING_CFG_DONE_EVENTID = 0x19C2,
2105 WMI_RX_DESC_RING_CFG_DONE_EVENTID = 0x19C3,
2106 WMI_CFG_DEF_RX_OFFLOAD_DONE_EVENTID = 0x19C5,
2107 WMI_SCHEDULING_SCHEME_EVENTID = 0x1A01,
2108 WMI_FIXED_SCHEDULING_CONFIG_COMPLETE_EVENTID = 0x1A02,
2109 WMI_ENABLE_FIXED_SCHEDULING_COMPLETE_EVENTID = 0x1A03,
2110 WMI_SET_MULTI_DIRECTED_OMNIS_CONFIG_EVENTID = 0x1A04,
2111 WMI_SET_LONG_RANGE_CONFIG_COMPLETE_EVENTID = 0x1A05,
2112 WMI_GET_ASSOC_LIST_RES_EVENTID = 0x1A06,
2113 WMI_GET_CCA_INDICATIONS_EVENTID = 0x1A07,
2114 WMI_SET_CCA_INDICATIONS_BI_AVG_NUM_EVENTID = 0x1A08,
2115 WMI_INTERNAL_FW_EVENT_EVENTID = 0x1A0A,
2116 WMI_INTERNAL_FW_IOCTL_EVENTID = 0x1A0B,
2117 WMI_LINK_STATS_CONFIG_DONE_EVENTID = 0x1A0C,
2118 WMI_LINK_STATS_EVENTID = 0x1A0D,
2119 WMI_SET_GRANT_MCS_EVENTID = 0x1A0E,
2120 WMI_SET_AP_SLOT_SIZE_EVENTID = 0x1A0F,
2121 WMI_SET_VRING_PRIORITY_WEIGHT_EVENTID = 0x1A10,
2122 WMI_SET_VRING_PRIORITY_EVENTID = 0x1A11,
2123 WMI_RBUFCAP_CFG_EVENTID = 0x1A12,
2124 WMI_TEMP_SENSE_ALL_DONE_EVENTID = 0x1A13,
2125 WMI_SET_CHANNEL_EVENTID = 0x9000,
2126 WMI_ASSOC_REQ_EVENTID = 0x9001,
2127 WMI_EAPOL_RX_EVENTID = 0x9002,
2128 WMI_MAC_ADDR_RESP_EVENTID = 0x9003,
2129 WMI_FW_VER_EVENTID = 0x9004,
2130 WMI_ACS_PASSIVE_SCAN_COMPLETE_EVENTID = 0x9005,
2131 WMI_INTERNAL_FW_SET_CHANNEL = 0x9006,
2132 WMI_COMMAND_NOT_SUPPORTED_EVENTID = 0xFFFF,
2135 /* Events data structures */
2136 enum wmi_fw_status {
2137 WMI_FW_STATUS_SUCCESS = 0x00,
2138 WMI_FW_STATUS_FAILURE = 0x01,
2141 /* WMI_RF_MGMT_STATUS_EVENTID */
2142 enum wmi_rf_status {
2143 WMI_RF_ENABLED = 0x00,
2144 WMI_RF_DISABLED_HW = 0x01,
2145 WMI_RF_DISABLED_SW = 0x02,
2146 WMI_RF_DISABLED_HW_SW = 0x03,
2149 /* WMI_RF_MGMT_STATUS_EVENTID */
2150 struct wmi_rf_mgmt_status_event {
2154 /* WMI_GET_STATUS_DONE_EVENTID */
2155 struct wmi_get_status_done_event {
2156 __le32 is_associated;
2159 u8 bssid[WMI_MAC_LEN];
2165 u8 ssid[WMI_MAX_SSID_LEN];
2170 /* WMI_FW_VER_EVENTID */
2171 struct wmi_fw_ver_event {
2172 /* FW image version */
2177 /* FW image build time stamp */
2184 /* Boot Loader image version */
2189 /* The number of entries in the FW capabilities array */
2190 u8 fw_capabilities_len;
2192 /* FW capabilities info
2193 * Must be the last member of the struct
2195 __le32 fw_capabilities[];
2198 /* WMI_GET_RF_STATUS_EVENTID */
2207 /* WMI_GET_RF_STATUS_EVENTID */
2208 enum board_file_rf_type {
2209 BF_RF_MARLON = 0x00,
2210 BF_RF_SPARROW = 0x01,
2211 BF_RF_TALYNA1 = 0x02,
2212 BF_RF_TALYNA2 = 0x03,
2215 /* WMI_GET_RF_STATUS_EVENTID */
2219 RF_WRONG_BOARD_FILE = 0x02,
2222 /* WMI_GET_RF_STATUS_EVENTID */
2223 struct wmi_get_rf_status_event {
2226 /* attached RFs bit vector */
2227 __le32 attached_rf_vector;
2228 /* enabled RFs bit vector */
2229 __le32 enabled_rf_vector;
2230 /* enum rf_status, refers to enabled RFs */
2232 /* enum board file RF type */
2233 __le32 board_file_rf_type;
2234 /* board file platform type */
2235 __le32 board_file_platform_type;
2236 /* board file version */
2237 __le32 board_file_version;
2238 /* enabled XIFs bit vector */
2239 __le32 enabled_xif_vector;
2243 /* WMI_GET_BASEBAND_TYPE_EVENTID */
2244 enum baseband_type {
2245 BASEBAND_UNKNOWN = 0x00,
2246 BASEBAND_SPARROW_M_A0 = 0x03,
2247 BASEBAND_SPARROW_M_A1 = 0x04,
2248 BASEBAND_SPARROW_M_B0 = 0x05,
2249 BASEBAND_SPARROW_M_C0 = 0x06,
2250 BASEBAND_SPARROW_M_D0 = 0x07,
2251 BASEBAND_TALYN_M_A0 = 0x08,
2252 BASEBAND_TALYN_M_B0 = 0x09,
2255 /* WMI_GET_BASEBAND_TYPE_EVENTID */
2256 struct wmi_get_baseband_type_event {
2257 /* enum baseband_type */
2258 __le32 baseband_type;
2261 /* WMI_MAC_ADDR_RESP_EVENTID */
2262 struct wmi_mac_addr_resp_event {
2263 u8 mac[WMI_MAC_LEN];
2266 __le32 offload_mode;
2269 /* WMI_EAPOL_RX_EVENTID */
2270 struct wmi_eapol_rx_event {
2271 u8 src_mac[WMI_MAC_LEN];
2276 /* WMI_READY_EVENTID */
2277 enum wmi_phy_capability {
2278 WMI_11A_CAPABILITY = 0x01,
2279 WMI_11G_CAPABILITY = 0x02,
2280 WMI_11AG_CAPABILITY = 0x03,
2281 WMI_11NA_CAPABILITY = 0x04,
2282 WMI_11NG_CAPABILITY = 0x05,
2283 WMI_11NAG_CAPABILITY = 0x06,
2284 WMI_11AD_CAPABILITY = 0x07,
2285 WMI_11N_CAPABILITY_OFFSET = 0x03,
2288 struct wmi_ready_event {
2291 u8 mac[WMI_MAC_LEN];
2292 /* enum wmi_phy_capability */
2294 u8 numof_additional_mids;
2295 /* rfc read calibration result. 5..15 */
2296 u8 rfc_read_calib_result;
2297 /* Max associated STAs supported by FW in AP mode (default 0 means 8
2304 /* WMI_NOTIFY_REQ_DONE_EVENTID */
2305 struct wmi_notify_req_done_event {
2306 /* beamforming status, 0: fail; 1: OK; 2: retrying */
2310 /* enum wmi_edmg_tx_mode */
2317 __le16 my_rx_sector;
2318 __le16 my_tx_sector;
2319 __le16 other_rx_sector;
2320 __le16 other_tx_sector;
2326 /* WMI_CONNECT_EVENTID */
2327 struct wmi_connect_event {
2328 /* enum wmi_channel WMI_CHANNEL_1..WMI_CHANNEL_6; for EDMG this is
2329 * the primary channel number
2332 /* enum wmi_channel WMI_CHANNEL_9..WMI_CHANNEL_12 */
2334 u8 bssid[WMI_MAC_LEN];
2335 __le16 listen_interval;
2336 __le16 beacon_interval;
2349 /* disconnect_reason */
2350 enum wmi_disconnect_reason {
2351 WMI_DIS_REASON_NO_NETWORK_AVAIL = 0x01,
2353 WMI_DIS_REASON_LOST_LINK = 0x02,
2354 WMI_DIS_REASON_DISCONNECT_CMD = 0x03,
2355 WMI_DIS_REASON_BSS_DISCONNECTED = 0x04,
2356 WMI_DIS_REASON_AUTH_FAILED = 0x05,
2357 WMI_DIS_REASON_ASSOC_FAILED = 0x06,
2358 WMI_DIS_REASON_NO_RESOURCES_AVAIL = 0x07,
2359 WMI_DIS_REASON_CSERV_DISCONNECT = 0x08,
2360 WMI_DIS_REASON_INVALID_PROFILE = 0x0A,
2361 WMI_DIS_REASON_DOT11H_CHANNEL_SWITCH = 0x0B,
2362 WMI_DIS_REASON_PROFILE_MISMATCH = 0x0C,
2363 WMI_DIS_REASON_CONNECTION_EVICTED = 0x0D,
2364 WMI_DIS_REASON_IBSS_MERGE = 0x0E,
2365 WMI_DIS_REASON_HIGH_TEMPERATURE = 0x0F,
2368 /* WMI_DISCONNECT_EVENTID */
2369 struct wmi_disconnect_event {
2370 /* reason code, see 802.11 spec. */
2371 __le16 protocol_reason_status;
2373 u8 bssid[WMI_MAC_LEN];
2374 /* see enum wmi_disconnect_reason */
2375 u8 disconnect_reason;
2376 /* last assoc req may passed to host - not in used */
2378 /* last assoc req may passed to host - not in used */
2382 /* WMI_SCAN_COMPLETE_EVENTID */
2384 WMI_SCAN_SUCCESS = 0x00,
2385 WMI_SCAN_FAILED = 0x01,
2386 WMI_SCAN_ABORTED = 0x02,
2387 WMI_SCAN_REJECTED = 0x03,
2388 WMI_SCAN_ABORT_REJECTED = 0x04,
2391 struct wmi_scan_complete_event {
2392 /* enum scan_status */
2396 /* WMI_FT_AUTH_STATUS_EVENTID */
2397 struct wmi_ft_auth_status_event {
2398 /* enum wmi_fw_status */
2401 u8 mac_addr[WMI_MAC_LEN];
2406 /* WMI_FT_REASSOC_STATUS_EVENTID */
2407 struct wmi_ft_reassoc_status_event {
2408 /* enum wmi_fw_status */
2410 /* association id received from new AP */
2412 /* enum wmi_channel */
2414 /* enum wmi_channel */
2416 u8 mac_addr[WMI_MAC_LEN];
2417 __le16 beacon_ie_len;
2418 __le16 reassoc_req_ie_len;
2419 __le16 reassoc_resp_ie_len;
2424 /* wmi_rx_mgmt_info */
2425 struct wmi_rx_mgmt_info {
2433 /* Not resolved when == 0xFFFFFFFF == > Broadcast to all MIDS */
2435 /* Not resolved when == 0xFFFFFFFF == > Broadcast to all MIDS */
2438 /* From Radio MNGR */
2442 /* WMI_START_SCHED_SCAN_EVENTID */
2443 enum wmi_pno_result {
2444 WMI_PNO_SUCCESS = 0x00,
2445 WMI_PNO_REJECT = 0x01,
2446 WMI_PNO_INVALID_PARAMETERS = 0x02,
2447 WMI_PNO_NOT_ENABLED = 0x03,
2450 struct wmi_start_sched_scan_event {
2451 /* wmi_pno_result */
2456 struct wmi_stop_sched_scan_event {
2457 /* wmi_pno_result */
2462 struct wmi_sched_scan_result_event {
2463 struct wmi_rx_mgmt_info info;
2467 /* WMI_ACS_PASSIVE_SCAN_COMPLETE_EVENT */
2468 enum wmi_acs_info_bitmask {
2469 WMI_ACS_INFO_BITMASK_BEACON_FOUND = 0x01,
2470 WMI_ACS_INFO_BITMASK_BUSY_TIME = 0x02,
2471 WMI_ACS_INFO_BITMASK_TX_TIME = 0x04,
2472 WMI_ACS_INFO_BITMASK_RX_TIME = 0x08,
2473 WMI_ACS_INFO_BITMASK_NOISE = 0x10,
2476 struct scan_acs_info {
2487 struct wmi_acs_passive_scan_complete_event {
2489 /* valid fields within channel info according to
2490 * their appearance in struct order
2493 u8 num_scanned_channels;
2495 struct scan_acs_info scan_info_list[];
2498 /* WMI_BA_STATUS_EVENTID */
2499 enum wmi_vring_ba_status {
2500 WMI_BA_AGREED = 0x00,
2501 WMI_BA_NON_AGREED = 0x01,
2502 /* BA_EN in middle of teardown flow */
2503 WMI_BA_TD_WIP = 0x02,
2504 /* BA_DIS or BA_EN in middle of BA SETUP flow */
2505 WMI_BA_SETUP_WIP = 0x03,
2506 /* BA_EN when the BA session is already active */
2507 WMI_BA_SESSION_ACTIVE = 0x04,
2508 /* BA_DIS when the BA session is not active */
2509 WMI_BA_SESSION_NOT_ACTIVE = 0x05,
2512 struct wmi_ba_status_event {
2513 /* enum wmi_vring_ba_status */
2522 /* WMI_DELBA_EVENTID */
2523 struct wmi_delba_event {
2524 /* Used for cid less than 8. For higher cid set
2525 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
2530 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
2532 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
2537 /* WMI_VRING_CFG_DONE_EVENTID */
2538 struct wmi_vring_cfg_done_event {
2542 __le32 tx_vring_tail_ptr;
2545 /* WMI_RCP_ADDBA_RESP_SENT_EVENTID */
2546 struct wmi_rcp_addba_resp_sent_event {
2547 /* Used for cid less than 8. For higher cid set
2548 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
2553 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
2555 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
2560 /* WMI_TX_STATUS_RING_CFG_DONE_EVENTID */
2561 struct wmi_tx_status_ring_cfg_done_event {
2566 __le32 ring_tail_ptr;
2569 /* WMI_RX_STATUS_RING_CFG_DONE_EVENTID */
2570 struct wmi_rx_status_ring_cfg_done_event {
2575 __le32 ring_tail_ptr;
2578 /* WMI_CFG_DEF_RX_OFFLOAD_DONE_EVENTID */
2579 struct wmi_cfg_def_rx_offload_done_event {
2585 /* WMI_TX_DESC_RING_CFG_DONE_EVENTID */
2586 struct wmi_tx_desc_ring_cfg_done_event {
2591 __le32 ring_tail_ptr;
2594 /* WMI_RX_DESC_RING_CFG_DONE_EVENTID */
2595 struct wmi_rx_desc_ring_cfg_done_event {
2600 __le32 ring_tail_ptr;
2603 /* WMI_RCP_ADDBA_REQ_EVENTID */
2604 struct wmi_rcp_addba_req_event {
2605 /* Used for cid less than 8. For higher cid set
2606 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
2610 /* ieee80211_ba_parameterset as it received */
2611 __le16 ba_param_set;
2613 /* ieee80211_ba_seqstrl field as it received */
2615 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
2617 /* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
2622 /* WMI_CFG_RX_CHAIN_DONE_EVENTID */
2623 enum wmi_cfg_rx_chain_done_event_status {
2624 WMI_CFG_RX_CHAIN_SUCCESS = 0x01,
2627 struct wmi_cfg_rx_chain_done_event {
2628 /* V-Ring Tail pointer */
2629 __le32 rx_ring_tail_ptr;
2633 /* WMI_WBE_LINK_DOWN_EVENTID */
2634 enum wmi_wbe_link_down_event_reason {
2635 WMI_WBE_REASON_USER_REQUEST = 0x00,
2636 WMI_WBE_REASON_RX_DISASSOC = 0x01,
2637 WMI_WBE_REASON_BAD_PHY_LINK = 0x02,
2640 /* WMI_WBE_LINK_DOWN_EVENTID */
2641 struct wmi_wbe_link_down_event {
2647 /* WMI_DATA_PORT_OPEN_EVENTID */
2648 struct wmi_data_port_open_event {
2653 /* WMI_RING_EN_EVENTID */
2654 struct wmi_ring_en_event {
2659 /* WMI_GET_PCP_CHANNEL_EVENTID */
2660 struct wmi_get_pcp_channel_event {
2665 /* WMI_P2P_CFG_DONE_EVENTID */
2666 struct wmi_p2p_cfg_done_event {
2672 /* WMI_PORT_ALLOCATED_EVENTID */
2673 struct wmi_port_allocated_event {
2679 /* WMI_PORT_DELETED_EVENTID */
2680 struct wmi_port_deleted_event {
2686 /* WMI_LISTEN_STARTED_EVENTID */
2687 struct wmi_listen_started_event {
2693 /* WMI_SEARCH_STARTED_EVENTID */
2694 struct wmi_search_started_event {
2700 /* WMI_PCP_STARTED_EVENTID */
2701 struct wmi_pcp_started_event {
2707 /* WMI_PCP_FACTOR_EVENTID */
2708 struct wmi_pcp_factor_event {
2712 enum wmi_sw_tx_status {
2713 WMI_TX_SW_STATUS_SUCCESS = 0x00,
2714 WMI_TX_SW_STATUS_FAILED_NO_RESOURCES = 0x01,
2715 WMI_TX_SW_STATUS_FAILED_TX = 0x02,
2718 /* WMI_SW_TX_COMPLETE_EVENTID */
2719 struct wmi_sw_tx_complete_event {
2720 /* enum wmi_sw_tx_status */
2725 /* WMI_CORR_MEASURE_EVENTID - deprecated */
2726 struct wmi_corr_measure_event {
2737 /* WMI_READ_RSSI_EVENTID */
2738 struct wmi_read_rssi_event {
2739 __le32 ina_rssi_adc_dbm;
2742 /* WMI_GET_SSID_EVENTID */
2743 struct wmi_get_ssid_event {
2745 u8 ssid[WMI_MAX_SSID_LEN];
2748 /* EVENT: WMI_RF_XPM_READ_RESULT_EVENTID */
2749 struct wmi_rf_xpm_read_result_event {
2750 /* enum wmi_fw_status_e - success=0 or fail=1 */
2753 /* requested num_bytes of data */
2757 /* EVENT: WMI_RF_XPM_WRITE_RESULT_EVENTID */
2758 struct wmi_rf_xpm_write_result_event {
2759 /* enum wmi_fw_status_e - success=0 or fail=1 */
2764 /* WMI_TX_MGMT_PACKET_EVENTID */
2765 struct wmi_tx_mgmt_packet_event {
2766 DECLARE_FLEX_ARRAY(u8, payload);
2769 /* WMI_RX_MGMT_PACKET_EVENTID */
2770 struct wmi_rx_mgmt_packet_event {
2771 struct wmi_rx_mgmt_info info;
2775 /* WMI_ECHO_RSP_EVENTID */
2776 struct wmi_echo_rsp_event {
2777 __le32 echoed_value;
2780 /* WMI_DEEP_ECHO_RSP_EVENTID */
2781 struct wmi_deep_echo_rsp_event {
2782 __le32 echoed_value;
2785 /* WMI_RF_PWR_ON_DELAY_RSP_EVENTID */
2786 struct wmi_rf_pwr_on_delay_rsp_event {
2792 /* WMI_SET_HIGH_POWER_TABLE_PARAMS_EVENTID */
2793 struct wmi_set_high_power_table_params_event {
2799 /* WMI_FIXED_SCHEDULING_UL_CONFIG_EVENTID */
2800 struct wmi_fixed_scheduling_ul_config_event {
2806 /* WMI_TEMP_SENSE_DONE_EVENTID
2808 * Measure MAC and radio temperatures
2810 struct wmi_temp_sense_done_event {
2811 /* Temperature times 1000 (actual temperature will be achieved by
2812 * dividing the value by 1000). When temperature cannot be read from
2813 * device return WMI_INVALID_TEMPERATURE
2815 __le32 baseband_t1000;
2816 /* Temperature times 1000 (actual temperature will be achieved by
2817 * dividing the value by 1000). When temperature cannot be read from
2818 * device return WMI_INVALID_TEMPERATURE
2823 #define WMI_SCAN_DWELL_TIME_MS (100)
2824 #define WMI_SURVEY_TIMEOUT_MS (10000)
2826 enum wmi_hidden_ssid {
2827 WMI_HIDDEN_SSID_DISABLED = 0x00,
2828 WMI_HIDDEN_SSID_SEND_EMPTY = 0x10,
2829 WMI_HIDDEN_SSID_CLEAR = 0xFE,
2832 /* WMI_LED_CFG_CMDID
2834 * Configure LED On\Off\Blinking operation
2837 * - WMI_LED_CFG_DONE_EVENTID
2844 /* The names of the led as
2845 * described on HW schemes.
2848 WMI_LED_WLAN = 0x00,
2849 WMI_LED_WPAN = 0x01,
2850 WMI_LED_WWAN = 0x02,
2853 /* Led polarity mode. */
2854 enum wmi_led_polarity {
2855 LED_POLARITY_HIGH_ACTIVE = 0x00,
2856 LED_POLARITY_LOW_ACTIVE = 0x01,
2859 /* Combination of on and off
2860 * creates the blinking period
2862 struct wmi_led_blink_mode {
2867 /* WMI_LED_CFG_CMDID */
2868 struct wmi_led_cfg_cmd {
2869 /* enum led_mode_e */
2871 /* enum wmi_led_id_e */
2873 /* slow speed blinking combination */
2874 struct wmi_led_blink_mode slow_blink_cfg;
2875 /* medium speed blinking combination */
2876 struct wmi_led_blink_mode medium_blink_cfg;
2877 /* high speed blinking combination */
2878 struct wmi_led_blink_mode fast_blink_cfg;
2879 /* polarity of the led */
2885 /* \WMI_SET_CONNECT_SNR_THR_CMDID */
2886 struct wmi_set_connect_snr_thr_cmd {
2890 __le16 omni_snr_thr;
2892 __le16 direct_snr_thr;
2895 /* WMI_LED_CFG_DONE_EVENTID */
2896 struct wmi_led_cfg_done_event {
2897 /* led config status */
2901 /* Rate search parameters configuration per connection */
2903 /* The maximal allowed PER for each MCS
2904 * MCS will be considered as failed if PER during RS is higher
2906 u8 per_threshold[WMI_NUM_MCS];
2907 /* Number of MPDUs for each MCS
2908 * this is the minimal statistic required to make an educated
2911 u8 min_frame_cnt[WMI_NUM_MCS];
2912 /* stop threshold [0-100] */
2914 /* MCS1 stop threshold [0-100] */
2916 u8 max_back_failure_th;
2917 /* Debug feature for disabling internal RS trigger (which is
2918 * currently triggered by BF Done)
2920 u8 dbg_disable_internal_trigger;
2921 __le32 back_failure_mask;
2925 enum wmi_edmg_tx_mode {
2926 WMI_TX_MODE_DMG = 0x0,
2927 WMI_TX_MODE_EDMG_CB1 = 0x1,
2928 WMI_TX_MODE_EDMG_CB2 = 0x2,
2929 WMI_TX_MODE_EDMG_CB1_LONG_LDPC = 0x3,
2930 WMI_TX_MODE_EDMG_CB2_LONG_LDPC = 0x4,
2934 /* Rate search parameters common configuration */
2935 struct wmi_rs_cfg_ex_common {
2936 /* enum wmi_edmg_tx_mode */
2938 /* stop threshold [0-100] */
2940 /* MCS1 stop threshold [0-100] */
2942 u8 max_back_failure_th;
2943 /* Debug feature for disabling internal RS trigger (which is
2944 * currently triggered by BF Done)
2946 u8 dbg_disable_internal_trigger;
2948 __le32 back_failure_mask;
2951 /* Rate search parameters configuration per MCS */
2952 struct wmi_rs_cfg_ex_mcs {
2953 /* The maximal allowed PER for each MCS
2954 * MCS will be considered as failed if PER during RS is higher
2957 /* Number of MPDUs for each MCS
2958 * this is the minimal statistic required to make an educated
2965 /* WMI_RS_CFG_EX_CMDID */
2966 struct wmi_rs_cfg_ex_cmd {
2967 /* Configuration for all MCSs */
2968 struct wmi_rs_cfg_ex_common common_cfg;
2969 u8 each_mcs_cfg_size;
2971 /* Configuration for each MCS */
2972 struct wmi_rs_cfg_ex_mcs each_mcs_cfg[];
2975 /* WMI_RS_CFG_EX_EVENTID */
2976 struct wmi_rs_cfg_ex_event {
2977 /* enum wmi_edmg_tx_mode */
2979 /* enum wmi_fw_status */
2984 /* WMI_RS_ENABLE_CMDID */
2985 struct wmi_rs_enable_cmd {
2987 /* enable or disable rate search */
2993 /* WMI_RS_ENABLE_EVENTID */
2994 struct wmi_rs_enable_event {
2995 /* enum wmi_fw_status */
3001 enum wmi_sched_scheme_slot_type {
3002 WMI_SCHED_SLOT_SP = 0x0,
3003 WMI_SCHED_SLOT_CBAP = 0x1,
3004 WMI_SCHED_SLOT_IDLE = 0x2,
3005 WMI_SCHED_SLOT_ANNOUNCE_NO_ACK = 0x3,
3006 WMI_SCHED_SLOT_DISCOVERY = 0x4,
3009 enum wmi_sched_scheme_slot_flags {
3010 WMI_SCHED_SCHEME_SLOT_PERIODIC = 0x1,
3013 struct wmi_sched_scheme_slot {
3014 /* in microsecond */
3016 /* wmi_sched_scheme_slot_flags */
3018 /* wmi_sched_scheme_slot_type */
3020 /* in microsecond */
3022 /* frame_exchange_sequence_duration */
3024 /* time in microseconds between two consecutive slots
3025 * relevant only if flag WMI_SCHED_SCHEME_SLOT_PERIODIC set
3028 /* relevant only if flag WMI_SCHED_SCHEME_SLOT_PERIODIC set
3029 * number of times to repeat allocation
3032 /* relevant only if flag WMI_SCHED_SCHEME_SLOT_PERIODIC set
3033 * every idle_period allocation will be idle
3041 enum wmi_sched_scheme_flags {
3042 /* should not be set when clearing scheduling scheme */
3043 WMI_SCHED_SCHEME_ENABLE = 0x01,
3044 WMI_SCHED_PROTECTED_SP = 0x02,
3045 /* should be set only on first WMI fragment of scheme */
3046 WMI_SCHED_FIRST = 0x04,
3047 /* should be set only on last WMI fragment of scheme */
3048 WMI_SCHED_LAST = 0x08,
3049 WMI_SCHED_IMMEDIATE_START = 0x10,
3052 enum wmi_sched_scheme_advertisment {
3053 /* ESE is not advertised at all, STA has to be configured with WMI
3056 WMI_ADVERTISE_ESE_DISABLED = 0x0,
3057 WMI_ADVERTISE_ESE_IN_BEACON = 0x1,
3058 WMI_ADVERTISE_ESE_IN_ANNOUNCE_FRAME = 0x2,
3061 /* WMI_SCHEDULING_SCHEME_CMD */
3062 struct wmi_scheduling_scheme_cmd {
3064 /* wmi_sched_scheme_advertisment */
3065 u8 ese_advertisment;
3066 /* wmi_sched_scheme_flags */
3071 /* allocations list */
3072 struct wmi_sched_scheme_slot allocs[WMI_SCHED_MAX_ALLOCS_PER_CMD];
3075 enum wmi_sched_scheme_failure_type {
3076 WMI_SCHED_SCHEME_FAILURE_NO_ERROR = 0x00,
3077 WMI_SCHED_SCHEME_FAILURE_OLD_START_TSF_ERR = 0x01,
3080 /* WMI_SCHEDULING_SCHEME_EVENTID */
3081 struct wmi_scheduling_scheme_event {
3082 /* wmi_fw_status_e */
3084 /* serial number given in command */
3086 /* wmi_sched_scheme_failure_type */
3088 /* alignment to 32b */
3092 /* WMI_RS_CFG_CMDID - deprecated */
3093 struct wmi_rs_cfg_cmd {
3096 /* enable or disable rate search */
3098 /* rate search configuration */
3099 struct wmi_rs_cfg rs_cfg;
3102 /* WMI_RS_CFG_DONE_EVENTID - deprecated */
3103 struct wmi_rs_cfg_done_event {
3105 /* enum wmi_fw_status */
3110 /* WMI_GET_DETAILED_RS_RES_CMDID - deprecated */
3111 struct wmi_get_detailed_rs_res_cmd {
3117 /* RS results status */
3118 enum wmi_rs_results_status {
3119 WMI_RS_RES_VALID = 0x00,
3120 WMI_RS_RES_INVALID = 0x01,
3123 /* Rate search results */
3124 struct wmi_rs_results {
3125 /* number of sent MPDUs */
3126 u8 num_of_tx_pkt[WMI_NUM_MCS];
3127 /* number of non-acked MPDUs */
3128 u8 num_of_non_acked_pkt[WMI_NUM_MCS];
3131 /* RS selected MCS */
3135 /* WMI_GET_DETAILED_RS_RES_EVENTID - deprecated */
3136 struct wmi_get_detailed_rs_res_event {
3138 /* enum wmi_rs_results_status */
3140 /* detailed rs results */
3141 struct wmi_rs_results rs_results;
3145 /* WMI_GET_DETAILED_RS_RES_EX_CMDID */
3146 struct wmi_get_detailed_rs_res_ex_cmd {
3151 /* Rate search results */
3152 struct wmi_rs_results_ex_common {
3155 /* RS selected MCS */
3157 /* enum wmi_edmg_tx_mode */
3162 /* Rate search results */
3163 struct wmi_rs_results_ex_mcs {
3164 /* number of sent MPDUs */
3166 /* number of non-acked MPDUs */
3167 u8 num_of_non_acked_pkt;
3171 /* WMI_GET_DETAILED_RS_RES_EX_EVENTID */
3172 struct wmi_get_detailed_rs_res_ex_event {
3174 /* enum wmi_rs_results_status */
3177 struct wmi_rs_results_ex_common common_rs_results;
3178 u8 each_mcs_results_size;
3180 /* Results for each MCS */
3181 struct wmi_rs_results_ex_mcs each_mcs_results[];
3184 /* BRP antenna limit mode */
3185 enum wmi_brp_ant_limit_mode {
3186 /* Disable BRP force antenna limit */
3187 WMI_BRP_ANT_LIMIT_MODE_DISABLE = 0x00,
3188 /* Define maximal antennas limit. Only effective antennas will be
3191 WMI_BRP_ANT_LIMIT_MODE_EFFECTIVE = 0x01,
3192 /* Force a specific number of antennas */
3193 WMI_BRP_ANT_LIMIT_MODE_FORCE = 0x02,
3194 /* number of BRP antenna limit modes */
3195 WMI_BRP_ANT_LIMIT_MODES_NUM = 0x03,
3198 /* WMI_BRP_SET_ANT_LIMIT_CMDID */
3199 struct wmi_brp_set_ant_limit_cmd {
3202 /* enum wmi_brp_ant_limit_mode */
3204 /* antenna limit count, 1-27
3205 * disable_mode - ignored
3206 * effective_mode - upper limit to number of antennas to be used
3207 * force_mode - exact number of antennas to be used
3213 /* WMI_BRP_SET_ANT_LIMIT_EVENTID */
3214 struct wmi_brp_set_ant_limit_event {
3221 WMI_BF_TYPE_SLS = 0x00,
3222 WMI_BF_TYPE_BRP_RX = 0x01,
3225 /* WMI_BF_TRIG_CMDID */
3226 struct wmi_bf_trig_cmd {
3227 /* enum wmi_bf_type - type of requested beamforming */
3229 /* used only for WMI_BF_TYPE_BRP_RX */
3231 /* used only for WMI_BF_TYPE_SLS */
3232 u8 dst_mac[WMI_MAC_LEN];
3236 /* WMI_BF_TRIG_EVENTID */
3237 struct wmi_bf_trig_event {
3238 /* enum wmi_fw_status */
3244 /* broadcast connection ID */
3245 #define WMI_LINK_MAINTAIN_CFG_CID_BROADCAST (0xFFFFFFFF)
3247 /* Types wmi_link_maintain_cfg presets for WMI_LINK_MAINTAIN_CFG_WRITE_CMD */
3248 enum wmi_link_maintain_cfg_type {
3249 /* AP/PCP default normal (non-FST) configuration settings */
3250 WMI_LINK_MAINTAIN_CFG_TYPE_DEFAULT_NORMAL_AP = 0x00,
3251 /* AP/PCP default FST configuration settings */
3252 WMI_LINK_MAINTAIN_CFG_TYPE_DEFAULT_FST_AP = 0x01,
3253 /* STA default normal (non-FST) configuration settings */
3254 WMI_LINK_MAINTAIN_CFG_TYPE_DEFAULT_NORMAL_STA = 0x02,
3255 /* STA default FST configuration settings */
3256 WMI_LINK_MAINTAIN_CFG_TYPE_DEFAULT_FST_STA = 0x03,
3257 /* custom configuration settings */
3258 WMI_LINK_MAINTAIN_CFG_TYPE_CUSTOM = 0x04,
3259 /* number of defined configuration types */
3260 WMI_LINK_MAINTAIN_CFG_TYPES_NUM = 0x05,
3263 /* Response status codes for WMI_LINK_MAINTAIN_CFG_WRITE/READ commands */
3264 enum wmi_link_maintain_cfg_response_status {
3265 /* WMI_LINK_MAINTAIN_CFG_WRITE/READ command successfully accomplished
3267 WMI_LINK_MAINTAIN_CFG_RESPONSE_STATUS_OK = 0x00,
3268 /* ERROR due to bad argument in WMI_LINK_MAINTAIN_CFG_WRITE/READ
3271 WMI_LINK_MAINTAIN_CFG_RESPONSE_STATUS_BAD_ARGUMENT = 0x01,
3274 /* Link Loss and Keep Alive configuration */
3275 struct wmi_link_maintain_cfg {
3276 /* link_loss_enable_detectors_vec */
3277 __le32 link_loss_enable_detectors_vec;
3278 /* detectors check period usec */
3279 __le32 check_link_loss_period_usec;
3280 /* max allowed tx ageing */
3281 __le32 tx_ageing_threshold_usec;
3282 /* keep alive period for high SNR */
3283 __le32 keep_alive_period_usec_high_snr;
3284 /* keep alive period for low SNR */
3285 __le32 keep_alive_period_usec_low_snr;
3286 /* lower snr limit for keep alive period update */
3287 __le32 keep_alive_snr_threshold_low_db;
3288 /* upper snr limit for keep alive period update */
3289 __le32 keep_alive_snr_threshold_high_db;
3290 /* num of successive bad bcons causing link-loss */
3291 __le32 bad_beacons_num_threshold;
3292 /* SNR limit for bad_beacons_detector */
3293 __le32 bad_beacons_snr_threshold_db;
3294 /* timeout for disassoc response frame in uSec */
3295 __le32 disconnect_timeout;
3298 /* WMI_LINK_MAINTAIN_CFG_WRITE_CMDID */
3299 struct wmi_link_maintain_cfg_write_cmd {
3300 /* enum wmi_link_maintain_cfg_type_e - type of requested default
3301 * configuration to be applied
3304 /* requested connection ID or WMI_LINK_MAINTAIN_CFG_CID_BROADCAST */
3306 /* custom configuration settings to be applied (relevant only if
3307 * cfg_type==WMI_LINK_MAINTAIN_CFG_TYPE_CUSTOM)
3309 struct wmi_link_maintain_cfg lm_cfg;
3312 /* WMI_LINK_MAINTAIN_CFG_READ_CMDID */
3313 struct wmi_link_maintain_cfg_read_cmd {
3314 /* connection ID which configuration settings are requested */
3318 /* WMI_SET_LINK_MONITOR_CMDID */
3319 struct wmi_set_link_monitor_cmd {
3322 u8 rssi_thresholds_list_size;
3323 s8 rssi_thresholds_list[] __counted_by(rssi_thresholds_list_size);
3326 /* wmi_link_monitor_event_type */
3327 enum wmi_link_monitor_event_type {
3328 WMI_LINK_MONITOR_NOTIF_RSSI_THRESHOLD_EVT = 0x00,
3329 WMI_LINK_MONITOR_NOTIF_TX_ERR_EVT = 0x01,
3330 WMI_LINK_MONITOR_NOTIF_THERMAL_EVT = 0x02,
3333 /* WMI_SET_LINK_MONITOR_EVENTID */
3334 struct wmi_set_link_monitor_event {
3340 /* WMI_LINK_MONITOR_EVENTID */
3341 struct wmi_link_monitor_event {
3342 /* link_monitor_event_type */
3348 /* WMI_LINK_MAINTAIN_CFG_WRITE_DONE_EVENTID */
3349 struct wmi_link_maintain_cfg_write_done_event {
3350 /* requested connection ID */
3352 /* wmi_link_maintain_cfg_response_status_e - write status */
3356 /* \WMI_LINK_MAINTAIN_CFG_READ_DONE_EVENT */
3357 struct wmi_link_maintain_cfg_read_done_event {
3358 /* requested connection ID */
3360 /* wmi_link_maintain_cfg_response_status_e - read status */
3362 /* Retrieved configuration settings */
3363 struct wmi_link_maintain_cfg lm_cfg;
3366 enum wmi_traffic_suspend_status {
3367 WMI_TRAFFIC_SUSPEND_APPROVED = 0x0,
3368 WMI_TRAFFIC_SUSPEND_REJECTED_LINK_NOT_IDLE = 0x1,
3369 WMI_TRAFFIC_SUSPEND_REJECTED_DISCONNECT = 0x2,
3370 WMI_TRAFFIC_SUSPEND_REJECTED_OTHER = 0x3,
3373 /* WMI_TRAFFIC_SUSPEND_EVENTID */
3374 struct wmi_traffic_suspend_event {
3375 /* enum wmi_traffic_suspend_status_e */
3379 enum wmi_traffic_resume_status {
3380 WMI_TRAFFIC_RESUME_SUCCESS = 0x0,
3381 WMI_TRAFFIC_RESUME_FAILED = 0x1,
3384 enum wmi_resume_trigger {
3385 WMI_RESUME_TRIGGER_UNKNOWN = 0x0,
3386 WMI_RESUME_TRIGGER_HOST = 0x1,
3387 WMI_RESUME_TRIGGER_UCAST_RX = 0x2,
3388 WMI_RESUME_TRIGGER_BCAST_RX = 0x4,
3389 WMI_RESUME_TRIGGER_WMI_EVT = 0x8,
3390 WMI_RESUME_TRIGGER_DISCONNECT = 0x10,
3393 /* WMI_TRAFFIC_RESUME_EVENTID */
3394 struct wmi_traffic_resume_event {
3395 /* enum wmi_traffic_resume_status */
3398 /* enum wmi_resume_trigger bitmap */
3399 __le32 resume_triggers;
3402 /* Power Save command completion status codes */
3403 enum wmi_ps_cfg_cmd_status {
3404 WMI_PS_CFG_CMD_STATUS_SUCCESS = 0x00,
3405 WMI_PS_CFG_CMD_STATUS_BAD_PARAM = 0x01,
3407 WMI_PS_CFG_CMD_STATUS_ERROR = 0x02,
3410 /* Device Power Save Profiles */
3411 enum wmi_ps_profile_type {
3412 WMI_PS_PROFILE_TYPE_DEFAULT = 0x00,
3413 WMI_PS_PROFILE_TYPE_PS_DISABLED = 0x01,
3414 WMI_PS_PROFILE_TYPE_MAX_PS = 0x02,
3415 WMI_PS_PROFILE_TYPE_LOW_LATENCY_PS = 0x03,
3418 /* WMI_PS_DEV_PROFILE_CFG_READ_CMDID */
3419 struct wmi_ps_dev_profile_cfg_read_cmd {
3424 /* WMI_PS_DEV_PROFILE_CFG_READ_EVENTID */
3425 struct wmi_ps_dev_profile_cfg_read_event {
3426 /* wmi_ps_profile_type_e */
3431 /* WMI_PS_DEV_PROFILE_CFG_CMDID
3433 * Power save profile to be used by the device
3436 * - WMI_PS_DEV_PROFILE_CFG_EVENTID
3438 struct wmi_ps_dev_profile_cfg_cmd {
3439 /* wmi_ps_profile_type_e */
3444 /* WMI_PS_DEV_PROFILE_CFG_EVENTID */
3445 struct wmi_ps_dev_profile_cfg_event {
3446 /* wmi_ps_cfg_cmd_status_e */
3451 WMI_PS_LEVEL_DEEP_SLEEP = 0x00,
3452 WMI_PS_LEVEL_SHALLOW_SLEEP = 0x01,
3453 /* awake = all PS mechanisms are disabled */
3454 WMI_PS_LEVEL_AWAKE = 0x02,
3457 enum wmi_ps_deep_sleep_clk_level {
3459 WMI_PS_DEEP_SLEEP_CLK_LEVEL_RTC = 0x00,
3461 WMI_PS_DEEP_SLEEP_CLK_LEVEL_OSC = 0x01,
3462 /* @RTC Low latency */
3463 WMI_PS_DEEP_SLEEP_CLK_LEVEL_RTC_LT = 0x02,
3464 WMI_PS_DEEP_SLEEP_CLK_LEVEL_XTAL = 0x03,
3465 WMI_PS_DEEP_SLEEP_CLK_LEVEL_SYSCLK = 0x04,
3466 /* Not Applicable */
3467 WMI_PS_DEEP_SLEEP_CLK_LEVEL_N_A = 0xFF,
3470 /* Response by the FW to a D3 entry request */
3471 enum wmi_ps_d3_resp_policy {
3472 WMI_PS_D3_RESP_POLICY_DEFAULT = 0x00,
3473 /* debug -D3 req is always denied */
3474 WMI_PS_D3_RESP_POLICY_DENIED = 0x01,
3475 /* debug -D3 req is always approved */
3476 WMI_PS_D3_RESP_POLICY_APPROVED = 0x02,
3479 #define WMI_AOA_MAX_DATA_SIZE (128)
3481 enum wmi_aoa_meas_status {
3482 WMI_AOA_MEAS_SUCCESS = 0x00,
3483 WMI_AOA_MEAS_PEER_INCAPABLE = 0x01,
3484 WMI_AOA_MEAS_FAILURE = 0x02,
3487 /* WMI_AOA_MEAS_EVENTID */
3488 struct wmi_aoa_meas_event {
3489 u8 mac_addr[WMI_MAC_LEN];
3496 /* enum wmi_aoa_meas_type */
3498 /* Measurments are from RFs, defined by the mask */
3499 __le32 meas_rf_mask;
3500 /* enum wmi_aoa_meas_status */
3503 /* Length of meas_data in bytes */
3505 u8 meas_data[WMI_AOA_MAX_DATA_SIZE];
3508 /* WMI_SET_MGMT_RETRY_LIMIT_EVENTID */
3509 struct wmi_set_mgmt_retry_limit_event {
3510 /* enum wmi_fw_status */
3512 /* alignment to 32b */
3516 /* WMI_GET_MGMT_RETRY_LIMIT_EVENTID */
3517 struct wmi_get_mgmt_retry_limit_event {
3518 /* MAC retransmit limit for mgmt frames */
3519 u8 mgmt_retry_limit;
3520 /* alignment to 32b */
3524 /* WMI_TOF_GET_CAPABILITIES_EVENTID */
3525 struct wmi_tof_get_capabilities_event {
3527 /* maximum supported number of destination to start TOF */
3529 /* maximum supported number of measurements per burst */
3530 u8 max_num_of_meas_per_burst;
3532 /* maximum supported multi bursts */
3533 __le16 max_multi_bursts_sessions;
3534 /* maximum supported FTM burst duration , wmi_tof_burst_duration_e */
3535 __le16 max_ftm_burst_duration;
3536 /* AOA supported types */
3537 __le32 aoa_supported_types;
3540 /* WMI_SET_THERMAL_THROTTLING_CFG_EVENTID */
3541 struct wmi_set_thermal_throttling_cfg_event {
3547 /* WMI_GET_THERMAL_THROTTLING_CFG_EVENTID */
3548 struct wmi_get_thermal_throttling_cfg_event {
3550 struct wmi_tt_data tt_data;
3553 enum wmi_tof_session_end_status {
3554 WMI_TOF_SESSION_END_NO_ERROR = 0x00,
3555 WMI_TOF_SESSION_END_FAIL = 0x01,
3556 WMI_TOF_SESSION_END_PARAMS_ERROR = 0x02,
3557 WMI_TOF_SESSION_END_ABORTED = 0x03,
3558 WMI_TOF_SESSION_END_BUSY = 0x04,
3561 /* WMI_TOF_SESSION_END_EVENTID */
3562 struct wmi_tof_session_end_event {
3563 /* FTM session ID */
3565 /* wmi_tof_session_end_status_e */
3570 /* WMI_TOF_SET_LCI_EVENTID */
3571 struct wmi_tof_set_lci_event {
3572 /* enum wmi_fw_status */
3577 /* WMI_TOF_SET_LCR_EVENTID */
3578 struct wmi_tof_set_lcr_event {
3579 /* enum wmi_fw_status */
3584 /* Responder FTM Results */
3585 struct wmi_responder_ftm_res {
3592 __le16 tod_err_initiator;
3593 __le16 toa_err_initiator;
3596 enum wmi_tof_ftm_per_dest_res_status {
3597 WMI_PER_DEST_RES_NO_ERROR = 0x00,
3598 WMI_PER_DEST_RES_TX_RX_FAIL = 0x01,
3599 WMI_PER_DEST_RES_PARAM_DONT_MATCH = 0x02,
3602 enum wmi_tof_ftm_per_dest_res_flags {
3603 WMI_PER_DEST_RES_REQ_START = 0x01,
3604 WMI_PER_DEST_RES_BURST_REPORT_END = 0x02,
3605 WMI_PER_DEST_RES_REQ_END = 0x04,
3606 WMI_PER_DEST_RES_PARAM_UPDATE = 0x08,
3609 /* WMI_TOF_FTM_PER_DEST_RES_EVENTID */
3610 struct wmi_tof_ftm_per_dest_res_event {
3611 /* FTM session ID */
3613 /* destination MAC address */
3614 u8 dst_mac[WMI_MAC_LEN];
3615 /* wmi_tof_ftm_per_dest_res_flags_e */
3617 /* wmi_tof_ftm_per_dest_res_status_e */
3619 /* responder ASAP */
3621 /* responder number of FTM per burst */
3622 u8 responder_num_ftm_per_burst;
3623 /* responder number of FTM burst exponent */
3624 u8 responder_num_ftm_bursts_exp;
3625 /* responder burst duration ,wmi_tof_burst_duration_e */
3626 u8 responder_burst_duration;
3627 /* responder burst period, indicate interval between two consecutive
3628 * burst instances, in units of 100 ms
3630 __le16 responder_burst_period;
3631 /* receive burst counter */
3633 /* tsf of responder start burst */
3635 /* actual received ftm per burst */
3636 u8 actual_ftm_per_burst;
3637 /* Measurments are from RFs, defined by the mask */
3638 __le32 meas_rf_mask;
3640 struct wmi_responder_ftm_res responder_ftm_res[];
3643 /* WMI_TOF_CFG_RESPONDER_EVENTID */
3644 struct wmi_tof_cfg_responder_event {
3645 /* enum wmi_fw_status */
3650 enum wmi_tof_channel_info_type {
3651 WMI_TOF_CHANNEL_INFO_AOA = 0x00,
3652 WMI_TOF_CHANNEL_INFO_LCI = 0x01,
3653 WMI_TOF_CHANNEL_INFO_LCR = 0x02,
3654 WMI_TOF_CHANNEL_INFO_VENDOR_SPECIFIC = 0x03,
3655 WMI_TOF_CHANNEL_INFO_CIR = 0x04,
3656 WMI_TOF_CHANNEL_INFO_RSSI = 0x05,
3657 WMI_TOF_CHANNEL_INFO_SNR = 0x06,
3658 WMI_TOF_CHANNEL_INFO_DEBUG = 0x07,
3661 /* WMI_TOF_CHANNEL_INFO_EVENTID */
3662 struct wmi_tof_channel_info_event {
3663 /* FTM session ID */
3665 /* destination MAC address */
3666 u8 dst_mac[WMI_MAC_LEN];
3667 /* wmi_tof_channel_info_type_e */
3669 /* data report length */
3671 /* data report payload */
3675 /* WMI_TOF_SET_TX_RX_OFFSET_EVENTID */
3676 struct wmi_tof_set_tx_rx_offset_event {
3677 /* enum wmi_fw_status */
3682 /* WMI_TOF_GET_TX_RX_OFFSET_EVENTID */
3683 struct wmi_tof_get_tx_rx_offset_event {
3684 /* enum wmi_fw_status */
3686 /* RF index used to read the offsets */
3689 /* TX delay offset */
3691 /* RX delay offset */
3693 /* Offset to strongest tap of CIR */
3697 /* Result status codes for WMI commands */
3698 enum wmi_rf_sector_status {
3699 WMI_RF_SECTOR_STATUS_SUCCESS = 0x00,
3700 WMI_RF_SECTOR_STATUS_BAD_PARAMETERS_ERROR = 0x01,
3701 WMI_RF_SECTOR_STATUS_BUSY_ERROR = 0x02,
3702 WMI_RF_SECTOR_STATUS_NOT_SUPPORTED_ERROR = 0x03,
3705 /* Types of the RF sector (TX,RX) */
3706 enum wmi_rf_sector_type {
3707 WMI_RF_SECTOR_TYPE_RX = 0x00,
3708 WMI_RF_SECTOR_TYPE_TX = 0x01,
3711 /* Content of RF Sector (six 32-bits registers) */
3712 struct wmi_rf_sector_info {
3713 /* Phase values for RF Chains[15-0] (2bits per RF chain) */
3715 /* Phase values for RF Chains[31-16] (2bits per RF chain) */
3717 /* ETYPE Bit0 for all RF chains[31-0] - bit0 of Edge amplifier gain
3721 /* ETYPE Bit1 for all RF chains[31-0] - bit1 of Edge amplifier gain
3725 /* ETYPE Bit2 for all RF chains[31-0] - bit2 of Edge amplifier gain
3729 /* D-Type values (3bits each) for 8 Distribution amplifiers + X16
3732 __le32 dtype_swch_off;
3735 #define WMI_INVALID_RF_SECTOR_INDEX (0xFFFF)
3736 #define WMI_MAX_RF_MODULES_NUM (8)
3738 /* WMI_GET_RF_SECTOR_PARAMS_CMD */
3739 struct wmi_get_rf_sector_params_cmd {
3740 /* Sector number to be retrieved */
3742 /* enum wmi_rf_sector_type - type of requested RF sector */
3744 /* bitmask vector specifying destination RF modules */
3748 /* \WMI_GET_RF_SECTOR_PARAMS_DONE_EVENT */
3749 struct wmi_get_rf_sector_params_done_event {
3750 /* result status of WMI_GET_RF_SECTOR_PARAMS_CMD (enum
3751 * wmi_rf_sector_status)
3754 /* align next field to U64 boundary */
3756 /* TSF timestamp when RF sectors where retrieved */
3758 /* Content of RF sector retrieved from each RF module */
3759 struct wmi_rf_sector_info sectors_info[WMI_MAX_RF_MODULES_NUM];
3762 /* WMI_SET_RF_SECTOR_PARAMS_CMD */
3763 struct wmi_set_rf_sector_params_cmd {
3764 /* Sector number to be retrieved */
3766 /* enum wmi_rf_sector_type - type of requested RF sector */
3768 /* bitmask vector specifying destination RF modules */
3770 /* Content of RF sector to be written to each RF module */
3771 struct wmi_rf_sector_info sectors_info[WMI_MAX_RF_MODULES_NUM];
3774 /* \WMI_SET_RF_SECTOR_PARAMS_DONE_EVENT */
3775 struct wmi_set_rf_sector_params_done_event {
3776 /* result status of WMI_SET_RF_SECTOR_PARAMS_CMD (enum
3777 * wmi_rf_sector_status)
3782 /* WMI_GET_SELECTED_RF_SECTOR_INDEX_CMD - Get RF sector index selected by
3783 * TXSS/BRP for communication with specified CID
3785 struct wmi_get_selected_rf_sector_index_cmd {
3786 /* Connection/Station ID in [0:7] range */
3788 /* type of requested RF sector (enum wmi_rf_sector_type) */
3790 /* align to U32 boundary */
3794 /* \WMI_GET_SELECTED_RF_SECTOR_INDEX_DONE_EVENT - Returns retrieved RF sector
3795 * index selected by TXSS/BRP for communication with specified CID
3797 struct wmi_get_selected_rf_sector_index_done_event {
3798 /* Retrieved sector index selected in TXSS (for TX sector request) or
3799 * BRP (for RX sector request)
3802 /* result status of WMI_GET_SELECTED_RF_SECTOR_INDEX_CMD (enum
3803 * wmi_rf_sector_status)
3806 /* align next field to U64 boundary */
3808 /* TSF timestamp when result was retrieved */
3812 /* WMI_SET_SELECTED_RF_SECTOR_INDEX_CMD - Force RF sector index for
3813 * communication with specified CID. Assumes that TXSS/BRP is disabled by
3816 struct wmi_set_selected_rf_sector_index_cmd {
3817 /* Connection/Station ID in [0:7] range */
3819 /* type of requested RF sector (enum wmi_rf_sector_type) */
3821 /* Forced sector index */
3825 /* \WMI_SET_SELECTED_RF_SECTOR_INDEX_DONE_EVENT - Success/Fail status for
3826 * WMI_SET_SELECTED_RF_SECTOR_INDEX_CMD
3828 struct wmi_set_selected_rf_sector_index_done_event {
3829 /* result status of WMI_SET_SELECTED_RF_SECTOR_INDEX_CMD (enum
3830 * wmi_rf_sector_status)
3833 /* align to U32 boundary */
3837 /* WMI_SET_RF_SECTOR_ON_CMD - Activates specified sector for specified rf
3840 struct wmi_set_rf_sector_on_cmd {
3841 /* Sector index to be activated */
3843 /* type of requested RF sector (enum wmi_rf_sector_type) */
3845 /* bitmask vector specifying destination RF modules */
3849 /* \WMI_SET_RF_SECTOR_ON_DONE_EVENT - Success/Fail status for
3850 * WMI_SET_RF_SECTOR_ON_CMD
3852 struct wmi_set_rf_sector_on_done_event {
3853 /* result status of WMI_SET_RF_SECTOR_ON_CMD (enum
3854 * wmi_rf_sector_status)
3857 /* align to U32 boundary */
3861 enum wmi_sector_sweep_type {
3862 WMI_SECTOR_SWEEP_TYPE_TXSS = 0x00,
3863 WMI_SECTOR_SWEEP_TYPE_BCON = 0x01,
3864 WMI_SECTOR_SWEEP_TYPE_TXSS_AND_BCON = 0x02,
3865 WMI_SECTOR_SWEEP_TYPE_NUM = 0x03,
3868 /* WMI_PRIO_TX_SECTORS_ORDER_CMDID
3870 * Set the order of TX sectors in TXSS and/or Beacon(AP).
3873 * - WMI_PRIO_TX_SECTORS_ORDER_EVENTID
3875 struct wmi_prio_tx_sectors_order_cmd {
3876 /* tx sectors order to be applied, 0xFF for end of array */
3877 u8 tx_sectors_priority_array[MAX_NUM_OF_SECTORS];
3878 /* enum wmi_sector_sweep_type, TXSS and/or Beacon */
3879 u8 sector_sweep_type;
3880 /* needed only for TXSS configuration */
3882 /* alignment to 32b */
3886 /* completion status codes */
3887 enum wmi_prio_tx_sectors_cmd_status {
3888 WMI_PRIO_TX_SECT_CMD_STATUS_SUCCESS = 0x00,
3889 WMI_PRIO_TX_SECT_CMD_STATUS_BAD_PARAM = 0x01,
3891 WMI_PRIO_TX_SECT_CMD_STATUS_ERROR = 0x02,
3894 /* WMI_PRIO_TX_SECTORS_ORDER_EVENTID */
3895 struct wmi_prio_tx_sectors_order_event {
3896 /* enum wmi_prio_tx_sectors_cmd_status */
3898 /* alignment to 32b */
3902 struct wmi_prio_tx_sectors_num_cmd {
3903 /* [0-128], 0 = No changes */
3904 u8 beacon_number_of_sectors;
3905 /* [0-128], 0 = No changes */
3906 u8 txss_number_of_sectors;
3907 /* [0-8] needed only for TXSS configuration */
3911 /* WMI_PRIO_TX_SECTORS_NUMBER_CMDID
3913 * Set the number of active sectors in TXSS and/or Beacon.
3916 * - WMI_PRIO_TX_SECTORS_NUMBER_EVENTID
3918 struct wmi_prio_tx_sectors_number_cmd {
3919 struct wmi_prio_tx_sectors_num_cmd active_sectors_num;
3920 /* alignment to 32b */
3924 /* WMI_PRIO_TX_SECTORS_NUMBER_EVENTID */
3925 struct wmi_prio_tx_sectors_number_event {
3926 /* enum wmi_prio_tx_sectors_cmd_status */
3928 /* alignment to 32b */
3932 /* WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_CMDID
3934 * Set default sectors order and number (hard coded in board file)
3935 * in TXSS and/or Beacon.
3938 * - WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID
3940 struct wmi_prio_tx_sectors_set_default_cfg_cmd {
3941 /* enum wmi_sector_sweep_type, TXSS and/or Beacon */
3942 u8 sector_sweep_type;
3943 /* needed only for TXSS configuration */
3945 /* alignment to 32b */
3949 /* WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID */
3950 struct wmi_prio_tx_sectors_set_default_cfg_event {
3951 /* enum wmi_prio_tx_sectors_cmd_status */
3953 /* alignment to 32b */
3957 /* WMI_SET_SILENT_RSSI_TABLE_DONE_EVENTID */
3958 struct wmi_set_silent_rssi_table_done_event {
3959 /* enum wmi_silent_rssi_status */
3961 /* enum wmi_silent_rssi_table */
3965 /* WMI_VRING_SWITCH_TIMING_CONFIG_EVENTID */
3966 struct wmi_vring_switch_timing_config_event {
3967 /* enum wmi_fw_status */
3972 /* WMI_GET_ASSOC_LIST_RES_EVENTID */
3973 struct wmi_assoc_sta_info {
3974 u8 mac[WMI_MAC_LEN];
3975 u8 omni_index_address;
3979 #define WMI_GET_ASSOC_LIST_SIZE (8)
3981 /* WMI_GET_ASSOC_LIST_RES_EVENTID
3982 * Returns up to MAX_ASSOC_STA_LIST_SIZE associated STAs
3984 struct wmi_get_assoc_list_res_event {
3985 struct wmi_assoc_sta_info assoc_sta_list[WMI_GET_ASSOC_LIST_SIZE];
3991 /* WMI_BF_CONTROL_EVENTID - deprecated */
3992 struct wmi_bf_control_event {
3998 /* WMI_BF_CONTROL_EX_EVENTID */
3999 struct wmi_bf_control_ex_event {
4005 /* WMI_COMMAND_NOT_SUPPORTED_EVENTID */
4006 struct wmi_command_not_supported_event {
4011 /* for UT command only, otherwise reserved */
4012 __le16 command_subtype;
4016 /* WMI_TSF_SYNC_CMDID */
4017 struct wmi_tsf_sync_cmd {
4018 /* The time interval to send announce frame in one BI */
4020 /* The mcs to send announce frame */
4025 /* WMI_TSF_SYNC_STATUS_EVENTID */
4026 enum wmi_tsf_sync_status {
4027 WMI_TSF_SYNC_SUCCESS = 0x00,
4028 WMI_TSF_SYNC_FAILED = 0x01,
4029 WMI_TSF_SYNC_REJECTED = 0x02,
4032 /* WMI_TSF_SYNC_STATUS_EVENTID */
4033 struct wmi_tsf_sync_status_event {
4034 /* enum wmi_tsf_sync_status */
4039 /* WMI_GET_CCA_INDICATIONS_EVENTID */
4040 struct wmi_get_cca_indications_event {
4043 /* CCA-Energy Detect in percentage over last BI (0..100) */
4045 /* Averaged CCA-Energy Detect in percent over number of BIs (0..100) */
4046 u8 cca_ed_avg_percent;
4047 /* NAV percent over last BI (0..100) */
4049 /* Averaged NAV percent over number of BIs (0..100) */
4054 /* WMI_SET_CCA_INDICATIONS_BI_AVG_NUM_CMDID */
4055 struct wmi_set_cca_indications_bi_avg_num_cmd {
4056 /* set the number of bis to average cca_ed (0..255) */
4061 /* WMI_SET_CCA_INDICATIONS_BI_AVG_NUM_EVENTID */
4062 struct wmi_set_cca_indications_bi_avg_num_event {
4068 /* WMI_INTERNAL_FW_SET_CHANNEL */
4069 struct wmi_internal_fw_set_channel_event {
4074 /* WMI_LINK_STATS_CONFIG_DONE_EVENTID */
4075 struct wmi_link_stats_config_done_event {
4076 /* wmi_fw_status_e */
4081 /* WMI_LINK_STATS_EVENTID */
4082 struct wmi_link_stats_event {
4084 __le16 payload_size;
4087 /* a stream of wmi_link_stats_record_s */
4091 /* WMI_LINK_STATS_EVENT */
4092 struct wmi_link_stats_record {
4093 /* wmi_link_stats_record_type_e */
4100 /* WMI_LINK_STATS_TYPE_BASIC */
4101 struct wmi_link_stats_basic {
4108 u8 rx_effective_ant_num;
4120 __le32 rx_bcast_frames;
4123 /* WMI_LINK_STATS_TYPE_GLOBAL */
4124 struct wmi_link_stats_global {
4125 /* all ack-able frames */
4127 /* all ack-able frames */
4129 __le32 rx_ba_frames;
4130 __le32 tx_ba_frames;
4132 __le32 rx_mic_errors;
4133 __le32 rx_crc_errors;
4134 __le32 tx_fail_no_ack;
4138 /* WMI_SET_GRANT_MCS_EVENTID */
4139 struct wmi_set_grant_mcs_event {
4145 /* WMI_SET_AP_SLOT_SIZE_EVENTID */
4146 struct wmi_set_ap_slot_size_event {
4152 /* WMI_SET_VRING_PRIORITY_WEIGHT_EVENTID */
4153 struct wmi_set_vring_priority_weight_event {
4159 /* WMI_SET_VRING_PRIORITY_EVENTID */
4160 struct wmi_set_vring_priority_event {
4166 /* WMI_RADAR_PCI_CTRL_BLOCK struct */
4167 struct wmi_radar_pci_ctrl_block {
4168 /* last fw tail address index */
4169 __le32 fw_tail_index;
4170 /* last SW head address index known to FW */
4171 __le32 sw_head_index;
4172 __le32 last_wr_pulse_tsf_low;
4173 __le32 last_wr_pulse_count;
4174 __le32 last_wr_in_bytes;
4175 __le32 last_wr_pulse_id;
4176 __le32 last_wr_burst_id;
4177 /* When pre overflow detected, advance sw head in unit of pulses */
4182 /* WMI_RBUFCAP_CFG_CMD */
4183 struct wmi_rbufcap_cfg_cmd {
4186 /* RBUFCAP indicates rx space unavailable when number of rx
4187 * descriptors drops below this threshold. Set 0 to use system
4190 __le16 rx_desc_threshold;
4193 /* WMI_RBUFCAP_CFG_EVENTID */
4194 struct wmi_rbufcap_cfg_event {
4195 /* enum wmi_fw_status */
4200 /* WMI_TEMP_SENSE_ALL_DONE_EVENTID
4201 * Measure MAC and all radio temperatures
4203 struct wmi_temp_sense_all_done_event {
4204 /* enum wmi_fw_status */
4206 /* Bitmap of connected RFs */
4209 /* Temperature times 1000 (actual temperature will be achieved by
4210 * dividing the value by 1000). When temperature cannot be read from
4211 * device return WMI_INVALID_TEMPERATURE
4213 __le32 rf_t1000[WMI_MAX_XIF_PORTS_NUM];
4214 /* Temperature times 1000 (actual temperature will be achieved by
4215 * dividing the value by 1000). When temperature cannot be read from
4216 * device return WMI_INVALID_TEMPERATURE
4218 __le32 baseband_t1000;
4221 #endif /* __WILOCITY_WMI_H__ */