1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Driver for Zarlink DVB-T MT352 demodulator
8 * AVerMedia AVerTV DVB-T 771 support by
11 * Support for Samsung TDTC9251DH01C(M) tuner
15 * DVICO FusionHDTV DVB-T1 and DVICO FusionHDTV DVB-T Lite support by
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/init.h>
22 #include <linux/delay.h>
23 #include <linux/string.h>
24 #include <linux/slab.h>
26 #include <media/dvb_frontend.h>
27 #include "mt352_priv.h"
31 struct i2c_adapter* i2c;
32 struct dvb_frontend frontend;
34 /* configuration settings */
35 struct mt352_config config;
39 #define dprintk(args...) \
41 if (debug) printk(KERN_DEBUG "mt352: " args); \
44 static int mt352_single_write(struct dvb_frontend *fe, u8 reg, u8 val)
46 struct mt352_state* state = fe->demodulator_priv;
47 u8 buf[2] = { reg, val };
48 struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0,
49 .buf = buf, .len = 2 };
50 int err = i2c_transfer(state->i2c, &msg, 1);
52 printk("mt352_write() to reg %x failed (err = %d)!\n", reg, err);
58 static int _mt352_write(struct dvb_frontend* fe, const u8 ibuf[], int ilen)
61 for (i=0; i < ilen-1; i++)
62 if ((err = mt352_single_write(fe,ibuf[0]+i,ibuf[i+1])))
68 static int mt352_read_register(struct mt352_state* state, u8 reg)
73 struct i2c_msg msg [] = { { .addr = state->config.demod_address,
75 .buf = b0, .len = 1 },
76 { .addr = state->config.demod_address,
78 .buf = b1, .len = 1 } };
80 ret = i2c_transfer(state->i2c, msg, 2);
83 printk("%s: readreg error (reg=%d, ret==%i)\n",
91 static int mt352_sleep(struct dvb_frontend* fe)
93 static u8 mt352_softdown[] = { CLOCK_CTL, 0x20, 0x08 };
95 _mt352_write(fe, mt352_softdown, sizeof(mt352_softdown));
99 static void mt352_calc_nominal_rate(struct mt352_state* state,
103 u32 adc_clock = 20480; /* 20.340 MHz */
118 if (state->config.adc_clock)
119 adc_clock = state->config.adc_clock;
121 value = 64 * bw * (1<<16) / (7 * 8);
122 value = value * 1000 / adc_clock;
123 dprintk("%s: bw %d, adc_clock %d => 0x%x\n",
124 __func__, bw, adc_clock, value);
129 static void mt352_calc_input_freq(struct mt352_state* state,
132 int adc_clock = 20480; /* 20.480000 MHz */
133 int if2 = 36167; /* 36.166667 MHz */
136 if (state->config.adc_clock)
137 adc_clock = state->config.adc_clock;
138 if (state->config.if2)
139 if2 = state->config.if2;
141 if (adc_clock >= if2 * 2)
144 ife = adc_clock - (if2 % adc_clock);
145 if (ife > adc_clock / 2)
146 ife = adc_clock - ife;
148 value = -16374 * ife / adc_clock;
149 dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n",
150 __func__, if2, ife, adc_clock, value, value & 0x3fff);
155 static int mt352_set_parameters(struct dvb_frontend *fe)
157 struct dtv_frontend_properties *op = &fe->dtv_property_cache;
158 struct mt352_state* state = fe->demodulator_priv;
159 unsigned char buf[13];
160 static unsigned char tuner_go[] = { 0x5d, 0x01 };
161 static unsigned char fsm_go[] = { 0x5e, 0x01 };
162 unsigned int tps = 0;
164 switch (op->code_rate_HP) {
184 switch (op->code_rate_LP) {
201 if (op->hierarchy == HIERARCHY_AUTO ||
202 op->hierarchy == HIERARCHY_NONE)
209 switch (op->modulation) {
223 switch (op->transmission_mode) {
224 case TRANSMISSION_MODE_2K:
225 case TRANSMISSION_MODE_AUTO:
227 case TRANSMISSION_MODE_8K:
234 switch (op->guard_interval) {
235 case GUARD_INTERVAL_1_32:
236 case GUARD_INTERVAL_AUTO:
238 case GUARD_INTERVAL_1_16:
241 case GUARD_INTERVAL_1_8:
244 case GUARD_INTERVAL_1_4:
251 switch (op->hierarchy) {
269 buf[0] = TPS_GIVEN_1; /* TPS_GIVEN_1 and following registers */
271 buf[1] = msb(tps); /* TPS_GIVEN_(1|0) */
274 buf[3] = 0x50; // old
275 // buf[3] = 0xf4; // pinnacle
277 mt352_calc_nominal_rate(state, op->bandwidth_hz, buf+4);
278 mt352_calc_input_freq(state, buf+6);
280 if (state->config.no_tuner) {
281 if (fe->ops.tuner_ops.set_params) {
282 fe->ops.tuner_ops.set_params(fe);
283 if (fe->ops.i2c_gate_ctrl)
284 fe->ops.i2c_gate_ctrl(fe, 0);
287 _mt352_write(fe, buf, 8);
288 _mt352_write(fe, fsm_go, 2);
290 if (fe->ops.tuner_ops.calc_regs) {
291 fe->ops.tuner_ops.calc_regs(fe, buf+8, 5);
293 _mt352_write(fe, buf, sizeof(buf));
294 _mt352_write(fe, tuner_go, 2);
301 static int mt352_get_parameters(struct dvb_frontend* fe,
302 struct dtv_frontend_properties *op)
304 struct mt352_state* state = fe->demodulator_priv;
308 static const u8 tps_fec_to_api[8] =
320 if ( (mt352_read_register(state,0x00) & 0xC0) != 0xC0 )
323 /* Use TPS_RECEIVED-registers, not the TPS_CURRENT-registers because
324 * the mt352 sometimes works with the wrong parameters
326 tps = (mt352_read_register(state, TPS_RECEIVED_1) << 8) | mt352_read_register(state, TPS_RECEIVED_0);
327 div = (mt352_read_register(state, CHAN_START_1) << 8) | mt352_read_register(state, CHAN_START_0);
328 trl = mt352_read_register(state, TRL_NOMINAL_RATE_1);
330 op->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7];
331 op->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7];
333 switch ( (tps >> 13) & 3)
336 op->modulation = QPSK;
339 op->modulation = QAM_16;
342 op->modulation = QAM_64;
345 op->modulation = QAM_AUTO;
349 op->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K : TRANSMISSION_MODE_2K;
351 switch ( (tps >> 2) & 3)
354 op->guard_interval = GUARD_INTERVAL_1_32;
357 op->guard_interval = GUARD_INTERVAL_1_16;
360 op->guard_interval = GUARD_INTERVAL_1_8;
363 op->guard_interval = GUARD_INTERVAL_1_4;
366 op->guard_interval = GUARD_INTERVAL_AUTO;
370 switch ( (tps >> 10) & 7)
373 op->hierarchy = HIERARCHY_NONE;
376 op->hierarchy = HIERARCHY_1;
379 op->hierarchy = HIERARCHY_2;
382 op->hierarchy = HIERARCHY_4;
385 op->hierarchy = HIERARCHY_AUTO;
389 op->frequency = (500 * (div - IF_FREQUENCYx6)) / 3 * 1000;
392 op->bandwidth_hz = 8000000;
393 else if (trl == 0x64)
394 op->bandwidth_hz = 7000000;
396 op->bandwidth_hz = 6000000;
399 if (mt352_read_register(state, STATUS_2) & 0x02)
400 op->inversion = INVERSION_OFF;
402 op->inversion = INVERSION_ON;
407 static int mt352_read_status(struct dvb_frontend *fe, enum fe_status *status)
409 struct mt352_state* state = fe->demodulator_priv;
414 * The MT352 design manual from Zarlink states (page 46-47):
416 * Notes about the TUNER_GO register:
418 * If the Read_Tuner_Byte (bit-1) is activated, then the tuner status
419 * byte is copied from the tuner to the STATUS_3 register and
420 * completion of the read operation is indicated by bit-5 of the
421 * INTERRUPT_3 register.
424 if ((s0 = mt352_read_register(state, STATUS_0)) < 0)
426 if ((s1 = mt352_read_register(state, STATUS_1)) < 0)
428 if ((s3 = mt352_read_register(state, STATUS_3)) < 0)
433 *status |= FE_HAS_CARRIER;
435 *status |= FE_HAS_VITERBI;
437 *status |= FE_HAS_LOCK;
439 *status |= FE_HAS_SYNC;
441 *status |= FE_HAS_SIGNAL;
443 if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
444 (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))
445 *status &= ~FE_HAS_LOCK;
450 static int mt352_read_ber(struct dvb_frontend* fe, u32* ber)
452 struct mt352_state* state = fe->demodulator_priv;
454 *ber = (mt352_read_register (state, RS_ERR_CNT_2) << 16) |
455 (mt352_read_register (state, RS_ERR_CNT_1) << 8) |
456 (mt352_read_register (state, RS_ERR_CNT_0));
461 static int mt352_read_signal_strength(struct dvb_frontend* fe, u16* strength)
463 struct mt352_state* state = fe->demodulator_priv;
465 /* align the 12 bit AGC gain with the most significant bits */
466 u16 signal = ((mt352_read_register(state, AGC_GAIN_1) & 0x0f) << 12) |
467 (mt352_read_register(state, AGC_GAIN_0) << 4);
469 /* inverse of gain is signal strength */
474 static int mt352_read_snr(struct dvb_frontend* fe, u16* snr)
476 struct mt352_state* state = fe->demodulator_priv;
478 u8 _snr = mt352_read_register (state, SNR);
479 *snr = (_snr << 8) | _snr;
484 static int mt352_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
486 struct mt352_state* state = fe->demodulator_priv;
488 *ucblocks = (mt352_read_register (state, RS_UBC_1) << 8) |
489 (mt352_read_register (state, RS_UBC_0));
494 static int mt352_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
496 fe_tune_settings->min_delay_ms = 800;
497 fe_tune_settings->step_size = 0;
498 fe_tune_settings->max_drift = 0;
503 static int mt352_init(struct dvb_frontend* fe)
505 struct mt352_state* state = fe->demodulator_priv;
507 static u8 mt352_reset_attach [] = { RESET, 0xC0 };
509 dprintk("%s: hello\n",__func__);
511 if ((mt352_read_register(state, CLOCK_CTL) & 0x10) == 0 ||
512 (mt352_read_register(state, CONFIG) & 0x20) == 0) {
514 /* Do a "hard" reset */
515 _mt352_write(fe, mt352_reset_attach, sizeof(mt352_reset_attach));
516 return state->config.demod_init(fe);
522 static void mt352_release(struct dvb_frontend* fe)
524 struct mt352_state* state = fe->demodulator_priv;
528 static const struct dvb_frontend_ops mt352_ops;
530 struct dvb_frontend* mt352_attach(const struct mt352_config* config,
531 struct i2c_adapter* i2c)
533 struct mt352_state* state = NULL;
535 /* allocate memory for the internal state */
536 state = kzalloc(sizeof(struct mt352_state), GFP_KERNEL);
537 if (state == NULL) goto error;
539 /* setup the state */
541 memcpy(&state->config,config,sizeof(struct mt352_config));
543 /* check if the demod is there */
544 if (mt352_read_register(state, CHIP_ID) != ID_MT352) goto error;
546 /* create dvb_frontend */
547 memcpy(&state->frontend.ops, &mt352_ops, sizeof(struct dvb_frontend_ops));
548 state->frontend.demodulator_priv = state;
549 return &state->frontend;
556 static const struct dvb_frontend_ops mt352_ops = {
557 .delsys = { SYS_DVBT },
559 .name = "Zarlink MT352 DVB-T",
560 .frequency_min_hz = 174 * MHz,
561 .frequency_max_hz = 862 * MHz,
562 .frequency_stepsize_hz = 166667,
563 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
564 FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
566 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
567 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
568 FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER |
572 .release = mt352_release,
575 .sleep = mt352_sleep,
576 .write = _mt352_write,
578 .set_frontend = mt352_set_parameters,
579 .get_frontend = mt352_get_parameters,
580 .get_tune_settings = mt352_get_tune_settings,
582 .read_status = mt352_read_status,
583 .read_ber = mt352_read_ber,
584 .read_signal_strength = mt352_read_signal_strength,
585 .read_snr = mt352_read_snr,
586 .read_ucblocks = mt352_read_ucblocks,
589 module_param(debug, int, 0644);
590 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
592 MODULE_DESCRIPTION("Zarlink MT352 DVB-T Demodulator driver");
593 MODULE_AUTHOR("Holger Waechtler, Daniel Mack, Antonio Mancuso");
594 MODULE_LICENSE("GPL");
596 EXPORT_SYMBOL_GPL(mt352_attach);