]> Git Repo - linux.git/blob - drivers/gpu/drm/xlnx/zynqmp_dpsub.c
Linux 6.14-rc3
[linux.git] / drivers / gpu / drm / xlnx / zynqmp_dpsub.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * ZynqMP DisplayPort Subsystem Driver
4  *
5  * Copyright (C) 2017 - 2020 Xilinx, Inc.
6  *
7  * Authors:
8  * - Hyun Woo Kwon <[email protected]>
9  * - Laurent Pinchart <[email protected]>
10  */
11
12 #include <linux/clk.h>
13 #include <linux/dma-mapping.h>
14 #include <linux/module.h>
15 #include <linux/of_graph.h>
16 #include <linux/of_reserved_mem.h>
17 #include <linux/platform_device.h>
18 #include <linux/pm_runtime.h>
19 #include <linux/slab.h>
20
21 #include <drm/drm_atomic_helper.h>
22 #include <drm/drm_bridge.h>
23 #include <drm/drm_modeset_helper.h>
24 #include <drm/drm_module.h>
25
26 #include "zynqmp_disp.h"
27 #include "zynqmp_dp.h"
28 #include "zynqmp_dpsub.h"
29 #include "zynqmp_kms.h"
30
31 /* -----------------------------------------------------------------------------
32  * Power Management
33  */
34
35 static int __maybe_unused zynqmp_dpsub_suspend(struct device *dev)
36 {
37         struct zynqmp_dpsub *dpsub = dev_get_drvdata(dev);
38
39         if (!dpsub->drm)
40                 return 0;
41
42         return drm_mode_config_helper_suspend(&dpsub->drm->dev);
43 }
44
45 static int __maybe_unused zynqmp_dpsub_resume(struct device *dev)
46 {
47         struct zynqmp_dpsub *dpsub = dev_get_drvdata(dev);
48
49         if (!dpsub->drm)
50                 return 0;
51
52         return drm_mode_config_helper_resume(&dpsub->drm->dev);
53 }
54
55 static const struct dev_pm_ops zynqmp_dpsub_pm_ops = {
56         SET_SYSTEM_SLEEP_PM_OPS(zynqmp_dpsub_suspend, zynqmp_dpsub_resume)
57 };
58
59 /* -----------------------------------------------------------------------------
60  * Probe & Remove
61  */
62
63 static int zynqmp_dpsub_init_clocks(struct zynqmp_dpsub *dpsub)
64 {
65         int ret;
66
67         dpsub->apb_clk = devm_clk_get(dpsub->dev, "dp_apb_clk");
68         if (IS_ERR(dpsub->apb_clk))
69                 return PTR_ERR(dpsub->apb_clk);
70
71         ret = clk_prepare_enable(dpsub->apb_clk);
72         if (ret) {
73                 dev_err(dpsub->dev, "failed to enable the APB clock\n");
74                 return ret;
75         }
76
77         /*
78          * Try the live PL video clock, and fall back to the PS clock if the
79          * live PL video clock isn't valid.
80          */
81         dpsub->vid_clk = devm_clk_get(dpsub->dev, "dp_live_video_in_clk");
82         if (!IS_ERR(dpsub->vid_clk))
83                 dpsub->vid_clk_from_ps = false;
84         else if (PTR_ERR(dpsub->vid_clk) == -EPROBE_DEFER)
85                 return PTR_ERR(dpsub->vid_clk);
86
87         if (IS_ERR_OR_NULL(dpsub->vid_clk)) {
88                 dpsub->vid_clk = devm_clk_get(dpsub->dev, "dp_vtc_pixel_clk_in");
89                 if (IS_ERR(dpsub->vid_clk)) {
90                         dev_err(dpsub->dev, "failed to init any video clock\n");
91                         return PTR_ERR(dpsub->vid_clk);
92                 }
93                 dpsub->vid_clk_from_ps = true;
94         }
95
96         /*
97          * Try the live PL audio clock, and fall back to the PS clock if the
98          * live PL audio clock isn't valid. Missing audio clock disables audio
99          * but isn't an error.
100          */
101         dpsub->aud_clk = devm_clk_get(dpsub->dev, "dp_live_audio_aclk");
102         if (!IS_ERR(dpsub->aud_clk)) {
103                 dpsub->aud_clk_from_ps = false;
104                 return 0;
105         }
106
107         dpsub->aud_clk = devm_clk_get(dpsub->dev, "dp_aud_clk");
108         if (!IS_ERR(dpsub->aud_clk)) {
109                 dpsub->aud_clk_from_ps = true;
110                 return 0;
111         }
112
113         dev_info(dpsub->dev, "audio disabled due to missing clock\n");
114         return 0;
115 }
116
117 static int zynqmp_dpsub_parse_dt(struct zynqmp_dpsub *dpsub)
118 {
119         struct device_node *np;
120         unsigned int i;
121
122         /*
123          * For backward compatibility with old device trees that don't contain
124          * ports, consider that only the DP output port is connected if no
125          * ports child no exists.
126          */
127         np = of_get_child_by_name(dpsub->dev->of_node, "ports");
128         of_node_put(np);
129         if (!np) {
130                 dev_warn(dpsub->dev, "missing ports, update DT bindings\n");
131                 dpsub->connected_ports = BIT(ZYNQMP_DPSUB_PORT_OUT_DP);
132                 dpsub->dma_enabled = true;
133                 return 0;
134         }
135
136         /* Check which ports are connected. */
137         for (i = 0; i < ZYNQMP_DPSUB_NUM_PORTS; ++i) {
138                 struct device_node *np;
139
140                 np = of_graph_get_remote_node(dpsub->dev->of_node, i, -1);
141                 if (np) {
142                         dpsub->connected_ports |= BIT(i);
143                         of_node_put(np);
144                 }
145         }
146
147         /* Sanity checks. */
148         if ((dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_LIVE_VIDEO)) &&
149             (dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_LIVE_GFX))) {
150                 dev_err(dpsub->dev, "only one live video input is supported\n");
151                 return -EINVAL;
152         }
153
154         if ((dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_LIVE_VIDEO)) ||
155             (dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_LIVE_GFX))) {
156                 if (dpsub->vid_clk_from_ps) {
157                         dev_err(dpsub->dev,
158                                 "live video input requires PL clock\n");
159                         return -EINVAL;
160                 }
161         } else {
162                 dpsub->dma_enabled = true;
163         }
164
165         if (dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_LIVE_AUDIO))
166                 dev_warn(dpsub->dev, "live audio unsupported, ignoring\n");
167
168         if ((dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_OUT_VIDEO)) ||
169             (dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_OUT_AUDIO)))
170                 dev_warn(dpsub->dev, "output to PL unsupported, ignoring\n");
171
172         if (!(dpsub->connected_ports & BIT(ZYNQMP_DPSUB_PORT_OUT_DP))) {
173                 dev_err(dpsub->dev, "DP output port not connected\n");
174                 return -EINVAL;
175         }
176
177         return 0;
178 }
179
180 void zynqmp_dpsub_release(struct zynqmp_dpsub *dpsub)
181 {
182         kfree(dpsub->disp);
183         kfree(dpsub->dp);
184         kfree(dpsub);
185 }
186
187 static int zynqmp_dpsub_probe(struct platform_device *pdev)
188 {
189         struct zynqmp_dpsub *dpsub;
190         int ret;
191
192         /* Allocate private data. */
193         dpsub = kzalloc(sizeof(*dpsub), GFP_KERNEL);
194         if (!dpsub)
195                 return -ENOMEM;
196
197         dpsub->dev = &pdev->dev;
198         platform_set_drvdata(pdev, dpsub);
199
200         ret = dma_set_mask(dpsub->dev, DMA_BIT_MASK(ZYNQMP_DISP_MAX_DMA_BIT));
201         if (ret)
202                 return ret;
203
204         /* Try the reserved memory. Proceed if there's none. */
205         of_reserved_mem_device_init(&pdev->dev);
206
207         ret = zynqmp_dpsub_init_clocks(dpsub);
208         if (ret < 0)
209                 goto err_mem;
210
211         ret = zynqmp_dpsub_parse_dt(dpsub);
212         if (ret < 0)
213                 goto err_mem;
214
215         pm_runtime_enable(&pdev->dev);
216
217         /*
218          * DP should be probed first so that the zynqmp_disp can set the output
219          * format accordingly.
220          */
221         ret = zynqmp_dp_probe(dpsub);
222         if (ret)
223                 goto err_pm;
224
225         ret = zynqmp_disp_probe(dpsub);
226         if (ret)
227                 goto err_dp;
228
229         drm_bridge_add(dpsub->bridge);
230
231         if (dpsub->dma_enabled) {
232                 ret = zynqmp_dpsub_drm_init(dpsub);
233                 if (ret)
234                         goto err_disp;
235         }
236
237         ret = zynqmp_audio_init(dpsub);
238         if (ret)
239                 goto err_drm_cleanup;
240
241         dev_info(&pdev->dev, "ZynqMP DisplayPort Subsystem driver probed");
242
243         return 0;
244
245 err_drm_cleanup:
246         if (dpsub->drm)
247                 zynqmp_dpsub_drm_cleanup(dpsub);
248 err_disp:
249         drm_bridge_remove(dpsub->bridge);
250         zynqmp_disp_remove(dpsub);
251 err_dp:
252         zynqmp_dp_remove(dpsub);
253 err_pm:
254         pm_runtime_disable(&pdev->dev);
255         clk_disable_unprepare(dpsub->apb_clk);
256 err_mem:
257         of_reserved_mem_device_release(&pdev->dev);
258         if (!dpsub->drm)
259                 zynqmp_dpsub_release(dpsub);
260         return ret;
261 }
262
263 static void zynqmp_dpsub_remove(struct platform_device *pdev)
264 {
265         struct zynqmp_dpsub *dpsub = platform_get_drvdata(pdev);
266
267         zynqmp_audio_uninit(dpsub);
268
269         if (dpsub->drm)
270                 zynqmp_dpsub_drm_cleanup(dpsub);
271
272         drm_bridge_remove(dpsub->bridge);
273         zynqmp_disp_remove(dpsub);
274         zynqmp_dp_remove(dpsub);
275
276         pm_runtime_disable(&pdev->dev);
277         clk_disable_unprepare(dpsub->apb_clk);
278         of_reserved_mem_device_release(&pdev->dev);
279
280         if (!dpsub->drm)
281                 zynqmp_dpsub_release(dpsub);
282 }
283
284 static void zynqmp_dpsub_shutdown(struct platform_device *pdev)
285 {
286         struct zynqmp_dpsub *dpsub = platform_get_drvdata(pdev);
287
288         if (!dpsub->drm)
289                 return;
290
291         drm_atomic_helper_shutdown(&dpsub->drm->dev);
292 }
293
294 static const struct of_device_id zynqmp_dpsub_of_match[] = {
295         { .compatible = "xlnx,zynqmp-dpsub-1.7", },
296         { /* end of table */ },
297 };
298 MODULE_DEVICE_TABLE(of, zynqmp_dpsub_of_match);
299
300 static struct platform_driver zynqmp_dpsub_driver = {
301         .probe                  = zynqmp_dpsub_probe,
302         .remove                 = zynqmp_dpsub_remove,
303         .shutdown               = zynqmp_dpsub_shutdown,
304         .driver                 = {
305                 .name           = "zynqmp-dpsub",
306                 .pm             = &zynqmp_dpsub_pm_ops,
307                 .of_match_table = zynqmp_dpsub_of_match,
308         },
309 };
310
311 drm_module_platform_driver(zynqmp_dpsub_driver);
312
313 MODULE_AUTHOR("Xilinx, Inc.");
314 MODULE_DESCRIPTION("ZynqMP DP Subsystem Driver");
315 MODULE_LICENSE("GPL v2");
This page took 0.047689 seconds and 4 git commands to generate.