Documentation/ABI/testing/sysfs-class-power

   1 **General Properties**
   2
   3 What:           /sys/class/power_supply/<supply_name>/manufacturer
   4 Date:           May 2007
   5 Contact:        [email protected]
   6 Description:
   7                 Reports the name of the device manufacturer.
   8
   9                 Access: Read
  10                 Valid values: Represented as string
  11
  12 What:           /sys/class/power_supply/<supply_name>/model_name
  13 Date:           May 2007
  14 Contact:        [email protected]
  15 Description:
  16                 Reports the name of the device model.
  17
  18                 Access: Read
  19                 Valid values: Represented as string
  20
  21 What:           /sys/class/power_supply/<supply_name>/serial_number
  22 Date:           January 2008
  23 Contact:        [email protected]
  24 Description:
  25                 Reports the serial number of the device.
  26
  27                 Access: Read
  28                 Valid values: Represented as string
  29
  30 What:           /sys/class/power_supply/<supply_name>/type
  31 Date:           May 2010
  32 Contact:        [email protected]
  33 Description:
  34                 Describes the main type of the supply.
  35
  36                 Access: Read
  37                 Valid values: "Battery", "UPS", "Mains", "USB", "Wireless"
  38
  39 **Battery and USB properties**
  40
  41 What:           /sys/class/power_supply/<supply_name>/current_avg
  42 Date:           May 2007
  43 Contact:        [email protected]
  44 Description:
  45                 Battery:
  46
  47                   Reports an average IBAT current reading for the battery, over
  48                   a fixed period. Normally devices will provide a fixed interval
  49                   in which they average readings to smooth out the reported
  50                   value.
  51
  52                 USB:
  53
  54                   Reports an average IBUS current reading over a fixed period.
  55                   Normally devices will provide a fixed interval in which they
  56                   average readings to smooth out the reported value.
  57
  58                 Access: Read
  59
  60                 Valid values: Represented in microamps. Negative values are
  61                 used for discharging batteries, positive values for charging
  62                 batteries and for USB IBUS current.
  63
  64 What:           /sys/class/power_supply/<supply_name>/current_max
  65 Date:           October 2010
  66 Contact:        [email protected]
  67 Description:
  68                 Battery:
  69
  70                   Reports the maximum IBAT current allowed into the battery.
  71
  72                 USB:
  73
  74                   Reports the maximum IBUS current the supply can support.
  75
  76                 Access: Read
  77                 Valid values: Represented in microamps
  78
  79 What:           /sys/class/power_supply/<supply_name>/current_now
  80 Date:           May 2007
  81 Contact:        [email protected]
  82 Description:
  83
  84                 Battery:
  85
  86                   Reports an instant, single IBAT current reading for the
  87                   battery. This value is not averaged/smoothed.
  88
  89                   Access: Read
  90
  91                 USB:
  92
  93                   Reports the IBUS current supplied now. This value is generally
  94                   read-only reporting, unless the 'online' state of the supply
  95                   is set to be programmable, in which case this value can be set
  96                   within the reported min/max range.
  97
  98                   Access: Read, Write
  99
 100                 Valid values: Represented in microamps. Negative values are
 101                 used for discharging batteries, positive values for charging
 102                 batteries and for USB IBUS current.
 103
 104 What:           /sys/class/power_supply/<supply_name>/temp
 105 Date:           May 2007
 106 Contact:        [email protected]
 107 Description:
 108                 Battery:
 109
 110                   Reports the current TBAT battery temperature reading.
 111
 112                 USB:
 113
 114                   Reports the current supply temperature reading. This would
 115                   normally be the internal temperature of the device itself
 116                   (e.g TJUNC temperature of an IC)
 117
 118                 Access: Read
 119
 120                 Valid values: Represented in 1/10 Degrees Celsius
 121
 122 What:           /sys/class/power_supply/<supply_name>/temp_alert_max
 123 Date:           July 2012
 124 Contact:        [email protected]
 125 Description:
 126                 Battery:
 127
 128                   Maximum TBAT temperature trip-wire value where the supply will
 129                   notify user-space of the event.
 130
 131                 USB:
 132
 133                   Maximum supply temperature trip-wire value where the supply
 134                   will notify user-space of the event.
 135
 136                 This is normally used for the charging scenario where
 137                 user-space needs to know if the temperature has crossed an
 138                 upper threshold so it can take appropriate action (e.g. warning
 139                 user that the temperature is critically high, and charging has
 140                 stopped).
 141
 142                 Access: Read
 143
 144                 Valid values: Represented in 1/10 Degrees Celsius
 145
 146 What:           /sys/class/power_supply/<supply_name>/temp_alert_min
 147 Date:           July 2012
 148 Contact:        [email protected]
 149 Description:
 150
 151                 Battery:
 152
 153                   Minimum TBAT temperature trip-wire value where the supply will
 154                   notify user-space of the event.
 155
 156                 USB:
 157
 158                   Minimum supply temperature trip-wire value where the supply
 159                   will notify user-space of the event.
 160
 161                 This is normally used for the charging scenario where user-space
 162                 needs to know if the temperature has crossed a lower threshold
 163                 so it can take appropriate action (e.g. warning user that
 164                 temperature level is high, and charging current has been
 165                 reduced accordingly to remedy the situation).
 166
 167                 Access: Read
 168
 169                 Valid values: Represented in 1/10 Degrees Celsius
 170
 171 What:           /sys/class/power_supply/<supply_name>/temp_max
 172 Date:           July 2014
 173 Contact:        [email protected]
 174 Description:
 175                 Battery:
 176
 177                   Reports the maximum allowed TBAT battery temperature for
 178                   charging.
 179
 180                 USB:
 181
 182                   Reports the maximum allowed supply temperature for operation.
 183
 184                 Access: Read
 185
 186                 Valid values: Represented in 1/10 Degrees Celsius
 187
 188 What:           /sys/class/power_supply/<supply_name>/temp_min
 189 Date:           July 2014
 190 Contact:        [email protected]
 191 Description:
 192                 Battery:
 193
 194                   Reports the minimum allowed TBAT battery temperature for
 195                   charging.
 196
 197                 USB:
 198
 199                   Reports the minimum allowed supply temperature for operation.
 200
 201                 Access: Read
 202
 203                 Valid values: Represented in 1/10 Degrees Celsius
 204
 205 What:           /sys/class/power_supply/<supply_name>/voltage_max,
 206 Date:           January 2008
 207 Contact:        [email protected]
 208 Description:
 209                 Battery:
 210
 211                   Reports the maximum safe VBAT voltage permitted for the
 212                   battery, during charging.
 213
 214                 USB:
 215
 216                   Reports the maximum VBUS voltage the supply can support.
 217
 218                 Access: Read
 219
 220                 Valid values: Represented in microvolts
 221
 222 What:           /sys/class/power_supply/<supply_name>/voltage_min,
 223 Date:           January 2008
 224 Contact:        [email protected]
 225 Description:
 226                 Battery:
 227
 228                   Reports the minimum safe VBAT voltage permitted for the
 229                   battery, during discharging.
 230
 231                 USB:
 232
 233                   Reports the minimum VBUS voltage the supply can support.
 234
 235                 Access: Read
 236
 237                 Valid values: Represented in microvolts
 238
 239 What:           /sys/class/power_supply/<supply_name>/voltage_now,
 240 Date:           May 2007
 241 Contact:        [email protected]
 242 Description:
 243                 Battery:
 244
 245                   Reports an instant, single VBAT voltage reading for the
 246                   battery. This value is not averaged/smoothed.
 247
 248                   Access: Read
 249
 250                 USB:
 251
 252                   Reports the VBUS voltage supplied now. This value is generally
 253                   read-only reporting, unless the 'online' state of the supply
 254                   is set to be programmable, in which case this value can be set
 255                   within the reported min/max range.
 256
 257                   Access: Read, Write
 258
 259                 Valid values: Represented in microvolts
 260
 261 **Battery Properties**
 262
 263 What:           /sys/class/power_supply/<supply_name>/capacity
 264 Date:           May 2007
 265 Contact:        [email protected]
 266 Description:
 267                 Fine grain representation of battery capacity.
 268
 269                 Access: Read
 270
 271                 Valid values: 0 - 100 (percent)
 272
 273 What:           /sys/class/power_supply/<supply_name>/capacity_alert_max
 274 Date:           July 2012
 275 Contact:        [email protected]
 276 Description:
 277                 Maximum battery capacity trip-wire value where the supply will
 278                 notify user-space of the event. This is normally used for the
 279                 battery discharging scenario where user-space needs to know the
 280                 battery has dropped to an upper level so it can take
 281                 appropriate action (e.g. warning user that battery level is
 282                 low).
 283
 284                 Access: Read, Write
 285
 286                 Valid values: 0 - 100 (percent)
 287
 288 What:           /sys/class/power_supply/<supply_name>/capacity_alert_min
 289 Date:           July 2012
 290 Contact:        [email protected]
 291 Description:
 292                 Minimum battery capacity trip-wire value where the supply will
 293                 notify user-space of the event. This is normally used for the
 294                 battery discharging scenario where user-space needs to know the
 295                 battery has dropped to a lower level so it can take
 296                 appropriate action (e.g. warning user that battery level is
 297                 critically low).
 298
 299                 Access: Read, Write
 300
 301                 Valid values: 0 - 100 (percent)
 302
 303 What:           /sys/class/power_supply/<supply_name>/capacity_error_margin
 304 Date:           April 2019
 305 Contact:        [email protected]
 306 Description:
 307                 Battery capacity measurement becomes unreliable without
 308                 recalibration. This values provides the maximum error
 309                 margin expected to exist by the fuel gauge in percent.
 310                 Values close to 0% will be returned after (re-)calibration
 311                 has happened. Over time the error margin will increase.
 312                 100% means, that the capacity related values are basically
 313                 completely useless.
 314
 315                 Access: Read
 316
 317                 Valid values: 0 - 100 (percent)
 318
 319 What:           /sys/class/power_supply/<supply_name>/capacity_level
 320 Date:           June 2009
 321 Contact:        [email protected]
 322 Description:
 323                 Coarse representation of battery capacity.
 324
 325                 Access: Read
 326
 327                 Valid values:
 328                               "Unknown", "Critical", "Low", "Normal", "High",
 329                               "Full"
 330
 331 What:           /sys/class/power_supply/<supply_name>/charge_control_limit
 332 Date:           Oct 2012
 333 Contact:        [email protected]
 334 Description:
 335                 Maximum allowable charging current. Used for charge rate
 336                 throttling for thermal cooling or improving battery health.
 337
 338                 Access: Read, Write
 339
 340                 Valid values: Represented in microamps
 341
 342 What:           /sys/class/power_supply/<supply_name>/charge_control_limit_max
 343 Date:           Oct 2012
 344 Contact:        [email protected]
 345 Description:
 346                 Maximum legal value for the charge_control_limit property.
 347
 348                 Access: Read
 349
 350                 Valid values: Represented in microamps
 351
 352 What:           /sys/class/power_supply/<supply_name>/charge_control_start_threshold
 353 Date:           April 2019
 354 Contact:        [email protected]
 355 Description:
 356                 Represents a battery percentage level, below which charging will
 357                 begin.
 358
 359                 Access: Read, Write
 360                 Valid values: 0 - 100 (percent)
 361
 362 What:           /sys/class/power_supply/<supply_name>/charge_control_end_threshold
 363 Date:           April 2019
 364 Contact:        [email protected]
 365 Description:
 366                 Represents a battery percentage level, above which charging will
 367                 stop. Not all hardware is capable of setting this to an arbitrary
 368                 percentage. Drivers will round written values to the nearest
 369                 supported value. Reading back the value will show the actual
 370                 threshold set by the driver.
 371
 372                 Access: Read, Write
 373
 374                 Valid values: 0 - 100 (percent)
 375
 376 What:           /sys/class/power_supply/<supply_name>/charge_type
 377 Date:           July 2009
 378 Contact:        [email protected]
 379 Description:
 380                 Select the charging algorithm to use for a battery.
 381
 382                 Standard:
 383                         Fully charge the battery at a moderate rate.
 384                 Fast:
 385                         Quickly charge the battery using fast-charge
 386                         technology. This is typically harder on the battery
 387                         than standard charging and may lower its lifespan.
 388                 Trickle:
 389                         Users who primarily operate the system while
 390                         plugged into an external power source can extend
 391                         battery life with this mode. Vendor tooling may
 392                         call this "Primarily AC Use".
 393                 Adaptive:
 394                         Automatically optimize battery charge rate based
 395                         on typical usage pattern.
 396                 Custom:
 397                         Use the charge_control_* properties to determine
 398                         when to start and stop charging. Advanced users
 399                         can use this to drastically extend battery life.
 400                 Long Life:
 401                         The charger reduces its charging rate in order to
 402                         prolong the battery health.
 403                 Bypass:
 404                         The charger bypasses the charging path around the
 405                         integrated converter allowing for a "smart" wall
 406                         adaptor to perform the power conversion externally.
 407
 408                 Access: Read, Write
 409
 410                 Reading this returns the current active value, e.g. 'Standard'.
 411                 Check charge_types to get the values supported by the battery.
 412
 413                 Valid values:
 414                               "Unknown", "N/A", "Trickle", "Fast", "Standard",
 415                               "Adaptive", "Custom", "Long Life", "Bypass"
 416
 417 What:           /sys/class/power_supply/<supply_name>/charge_types
 418 Date:           December 2024
 419 Contact:        [email protected]
 420 Description:
 421                 Identical to charge_type but reading returns a list of supported
 422                 charge-types with the currently active type surrounded by square
 423                 brackets, e.g.: "Fast [Standard] Long_Life".
 424
 425                 power_supply class devices may support both charge_type and
 426                 charge_types for backward compatibility. In this case both will
 427                 always have the same active value and the active value can be
 428                 changed by writing either property.
 429
 430                 Note charge-types which contain a space such as "Long Life" will
 431                 have the space replaced by a '_' resulting in e.g. "Long_Life".
 432                 When writing charge-types both variants are accepted.
 433
 434 What:           /sys/class/power_supply/<supply_name>/charge_term_current
 435 Date:           July 2014
 436 Contact:        [email protected]
 437 Description:
 438                 Reports the charging current value which is used to determine
 439                 when the battery is considered full and charging should end.
 440
 441                 Access: Read
 442
 443                 Valid values: Represented in microamps
 444
 445 What:           /sys/class/power_supply/<supply_name>/health
 446 Date:           May 2007
 447 Contact:        [email protected]
 448 Description:
 449                 Reports the health of the battery or battery side of charger
 450                 functionality.
 451
 452                 Access: Read
 453
 454                 Valid values:
 455                               "Unknown", "Good", "Overheat", "Dead",
 456                               "Over voltage", "Under voltage", "Unspecified failure", "Cold",
 457                               "Watchdog timer expire", "Safety timer expire",
 458                               "Over current", "Calibration required", "Warm",
 459                               "Cool", "Hot", "No battery"
 460
 461 What:           /sys/class/power_supply/<supply_name>/precharge_current
 462 Date:           June 2017
 463 Contact:        [email protected]
 464 Description:
 465                 Reports the charging current applied during pre-charging phase
 466                 for a battery charge cycle.
 467
 468                 Access: Read
 469
 470                 Valid values: Represented in microamps
 471
 472 What:           /sys/class/power_supply/<supply_name>/present
 473 Date:           May 2007
 474 Contact:        [email protected]
 475 Description:
 476                 Reports whether a battery is present or not in the system. If the
 477                 property does not exist, the battery is considered to be present.
 478
 479                 Access: Read
 480
 481                 Valid values:
 482
 483                         == =======
 484                         0: Absent
 485                         1: Present
 486                         == =======
 487
 488 What:           /sys/class/power_supply/<supply_name>/status
 489 Date:           May 2007
 490 Contact:        [email protected]
 491 Description:
 492                 Represents the charging status of the battery. Normally this
 493                 is read-only reporting although for some supplies this can be
 494                 used to enable/disable charging to the battery.
 495
 496                 Access: Read, Write
 497
 498                 Valid values:
 499                               "Unknown", "Charging", "Discharging",
 500                               "Not charging", "Full"
 501
 502 What:           /sys/class/power_supply/<supply_name>/charge_behaviour
 503 Date:           November 2021
 504 Contact:        [email protected]
 505 Description:
 506                 Represents the charging behaviour.
 507
 508                 Access: Read, Write
 509
 510                 Valid values:
 511                         ================ ====================================
 512                         auto:            Charge normally, respect thresholds
 513                         inhibit-charge:  Do not charge while AC is attached
 514                         force-discharge: Force discharge while AC is attached
 515                         ================ ====================================
 516
 517 What:           /sys/class/power_supply/<supply_name>/technology
 518 Date:           May 2007
 519 Contact:        [email protected]
 520 Description:
 521                 Describes the battery technology supported by the supply.
 522
 523                 Access: Read
 524
 525                 Valid values:
 526                               "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe",
 527                               "NiCd", "LiMn"
 528
 529
 530 What:           /sys/class/power_supply/<supply_name>/voltage_avg,
 531 Date:           May 2007
 532 Contact:        [email protected]
 533 Description:
 534                 Reports an average VBAT voltage reading for the battery, over a
 535                 fixed period. Normally devices will provide a fixed interval in
 536                 which they average readings to smooth out the reported value.
 537
 538                 Access: Read
 539
 540                 Valid values: Represented in microvolts
 541
 542 What:           /sys/class/power_supply/<supply_name>/cycle_count
 543 Date:           January 2010
 544 Contact:        [email protected]
 545 Description:
 546                 Reports the number of full charge + discharge cycles the
 547                 battery has undergone.
 548
 549                 Access: Read
 550
 551                 Valid values:
 552                         Integer > 0: representing full cycles
 553                         Integer = 0: cycle_count info is not available
 554
 555 **USB Properties**
 556
 557 What:           /sys/class/power_supply/<supply_name>/input_current_limit
 558 Date:           July 2014
 559 Contact:        [email protected]
 560 Description:
 561                 Details the incoming IBUS current limit currently set in the
 562                 supply. Normally this is configured based on the type of
 563                 connection made (e.g. A configured SDP should output a maximum
 564                 of 500mA so the input current limit is set to the same value).
 565                 Use preferably input_power_limit, and for problems that can be
 566                 solved using power limit use input_current_limit.
 567
 568                 Access: Read, Write
 569
 570                 Valid values: Represented in microamps
 571
 572 What:           /sys/class/power_supply/<supply_name>/input_voltage_limit
 573 Date:           May 2019
 574 Contact:        [email protected]
 575 Description:
 576                 This entry configures the incoming VBUS voltage limit currently
 577                 set in the supply. Normally this is configured based on
 578                 system-level knowledge or user input (e.g. This is part of the
 579                 Pixel C's thermal management strategy to effectively limit the
 580                 input power to 5V when the screen is on to meet Google's skin
 581                 temperature targets). Note that this feature should not be
 582                 used for safety critical things.
 583                 Use preferably input_power_limit, and for problems that can be
 584                 solved using power limit use input_voltage_limit.
 585
 586                 Access: Read, Write
 587
 588                 Valid values: Represented in microvolts
 589
 590 What:           /sys/class/power_supply/<supply_name>/input_power_limit
 591 Date:           May 2019
 592 Contact:        [email protected]
 593 Description:
 594                 This entry configures the incoming power limit currently set
 595                 in the supply. Normally this is configured based on
 596                 system-level knowledge or user input. Use preferably this
 597                 feature to limit the incoming power and use current/voltage
 598                 limit only for problems that can be solved using power limit.
 599
 600                 Access: Read, Write
 601
 602                 Valid values: Represented in microwatts
 603
 604 What:           /sys/class/power_supply/<supply_name>/online,
 605 Date:           May 2007
 606 Contact:        [email protected]
 607 Description:
 608                 Indicates if VBUS is present for the supply. When the supply is
 609                 online, and the supply allows it, then it's possible to switch
 610                 between online states (e.g. Fixed -> Programmable for a PD_PPS
 611                 USB supply so voltage and current can be controlled).
 612
 613                 Access: Read, Write
 614
 615                 Valid values:
 616
 617                         == ==================================================
 618                         0: Offline
 619                         1: Online Fixed - Fixed Voltage Supply
 620                         2: Online Programmable - Programmable Voltage Supply
 621                         == ==================================================
 622
 623 What:           /sys/class/power_supply/<supply_name>/usb_type
 624 Date:           March 2018
 625 Contact:        [email protected]
 626 Description:
 627                 Reports what type of USB connection is currently active for
 628                 the supply, for example it can show if USB-PD capable source
 629                 is attached.
 630
 631                 Access: For power-supplies which consume USB power such
 632                 as battery charger chips, this indicates the type of
 633                 the connected USB power source and is Read-Only.
 634
 635                 For power-supplies which act as a USB power-source such as
 636                 e.g. the UCS1002 USB Port Power Controller this is writable.
 637
 638                 Valid values:
 639                               "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD",
 640                               "PD_DRP", "PD_PPS", "BrickID"
 641
 642 **Device Specific Properties**
 643
 644 What:           /sys/class/power/ds2760-battery.*/charge_now
 645 Date:           May 2010
 646 KernelVersion:  2.6.35
 647 Contact:        Daniel Mack <[email protected]>
 648 Description:
 649                 This file is writeable and can be used to set the current
 650                 coloumb counter value inside the battery monitor chip. This
 651                 is needed for unavoidable corrections of aging batteries.
 652                 A userspace daemon can monitor the battery charging logic
 653                 and once the counter drops out of considerable bounds, take
 654                 appropriate action.
 655
 656 What:           /sys/class/power/ds2760-battery.*/charge_full
 657 Date:           May 2010
 658 KernelVersion:  2.6.35
 659 Contact:        Daniel Mack <[email protected]>
 660 Description:
 661                 This file is writeable and can be used to set the assumed
 662                 battery 'full level'. As batteries age, this value has to be
 663                 amended over time.
 664
 665 What:           /sys/class/power_supply/max14577-charger/device/fast_charge_timer
 666 Date:           October 2014
 667 KernelVersion:  3.18.0
 668 Contact:        Krzysztof Kozlowski <[email protected]>
 669 Description:
 670                 This entry shows and sets the maximum time the max14577
 671                 charger operates in fast-charge mode. When the timer expires
 672                 the device will terminate fast-charge mode (charging current
 673                 will drop to 0 A) and will trigger interrupt.
 674
 675                 Valid values:
 676
 677                 - 5, 6 or 7 (hours),
 678                 - 0: disabled.
 679
 680 What:           /sys/class/power_supply/max77693-charger/device/fast_charge_timer
 681 Date:           January 2015
 682 KernelVersion:  3.19.0
 683 Contact:        Krzysztof Kozlowski <[email protected]>
 684 Description:
 685                 This entry shows and sets the maximum time the max77693
 686                 charger operates in fast-charge mode. When the timer expires
 687                 the device will terminate fast-charge mode (charging current
 688                 will drop to 0 A) and will trigger interrupt.
 689
 690                 Valid values:
 691
 692                 - 4 - 16 (hours), step by 2 (rounded down)
 693                 - 0: disabled.
 694
 695 What:           /sys/class/power_supply/max77693-charger/device/top_off_threshold_current
 696 Date:           January 2015
 697 KernelVersion:  3.19.0
 698 Contact:        Krzysztof Kozlowski <[email protected]>
 699 Description:
 700                 This entry shows and sets the charging current threshold for
 701                 entering top-off charging mode. When charging current in fast
 702                 charge mode drops below this value, the charger will trigger
 703                 interrupt and start top-off charging mode.
 704
 705                 Valid values:
 706
 707                 - 100000 - 200000 (microamps), step by 25000 (rounded down)
 708                 - 200000 - 350000 (microamps), step by 50000 (rounded down)
 709                 - 0: disabled.
 710
 711 What:           /sys/class/power_supply/max77693-charger/device/top_off_timer
 712 Date:           January 2015
 713 KernelVersion:  3.19.0
 714 Contact:        Krzysztof Kozlowski <[email protected]>
 715 Description:
 716                 This entry shows and sets the maximum time the max77693
 717                 charger operates in top-off charge mode. When the timer expires
 718                 the device will terminate top-off charge mode (charging current
 719                 will drop to 0 A) and will trigger interrupt.
 720
 721                 Valid values:
 722
 723                 - 0 - 70 (minutes), step by 10 (rounded down)
 724
 725 What:           /sys/class/power_supply/bq24257-charger/ovp_voltage
 726 Date:           October 2015
 727 KernelVersion:  4.4.0
 728 Contact:        Andreas Dannenberg <[email protected]>
 729 Description:
 730                 This entry configures the overvoltage protection feature of bq24257-
 731                 type charger devices. This feature protects the device and other
 732                 components against damage from overvoltage on the input supply. See
 733                 device datasheet for details.
 734
 735                 Valid values:
 736
 737                 - 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000,
 738                   10500000 (all uV)
 739
 740 What:           /sys/class/power_supply/bq24257-charger/in_dpm_voltage
 741 Date:           October 2015
 742 KernelVersion:  4.4.0
 743 Contact:        Andreas Dannenberg <[email protected]>
 744 Description:
 745                 This entry configures the input dynamic power path management voltage of
 746                 bq24257-type charger devices. Once the supply drops to the configured
 747                 voltage, the input current limit is reduced down to prevent the further
 748                 drop of the supply. When the IC enters this mode, the charge current is
 749                 lower than the set value. See device datasheet for details.
 750
 751                 Valid values:
 752
 753                 - 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
 754                   4760000 (all uV)
 755
 756 What:           /sys/class/power_supply/bq24257-charger/high_impedance_enable
 757 Date:           October 2015
 758 KernelVersion:  4.4.0
 759 Contact:        Andreas Dannenberg <[email protected]>
 760 Description:
 761                 This entry allows enabling the high-impedance mode of bq24257-type
 762                 charger devices. If enabled, it places the charger IC into low power
 763                 standby mode with the switch mode controller disabled. When disabled,
 764                 the charger operates normally. See device datasheet for details.
 765
 766                 Valid values:
 767
 768                 - 1: enabled
 769                 - 0: disabled
 770
 771 What:           /sys/class/power_supply/bq24257-charger/sysoff_enable
 772 Date:           October 2015
 773 KernelVersion:  4.4.0
 774 Contact:        Andreas Dannenberg <[email protected]>
 775 Description:
 776                 This entry allows enabling the sysoff mode of bq24257-type charger
 777                 devices. If enabled and the input is removed, the internal battery FET
 778                 is turned off in order to reduce the leakage from the BAT pin to less
 779                 than 1uA. Note that on some devices/systems this disconnects the battery
 780                 from the system. See device datasheet for details.
 781
 782                 Valid values:
 783
 784                 - 1: enabled
 785                 - 0: disabled
 786
 787 What:           /sys/class/power_supply/<supply_name>/manufacture_year
 788 Date:           January 2020
 789 Contact:        [email protected]
 790 Description:
 791                 Reports the year (following Gregorian calendar) when the device has been
 792                 manufactured.
 793
 794                 Access: Read
 795
 796                 Valid values: Reported as integer
 797
 798 What:           /sys/class/power_supply/<supply_name>/manufacture_month
 799 Date:           January 2020
 800 Contact:        [email protected]
 801 Description:
 802                 Reports the month when the device has been manufactured.
 803
 804                 Access: Read
 805
 806                 Valid values: 1-12
 807
 808 What:           /sys/class/power_supply/<supply_name>/manufacture_day
 809 Date:           January 2020
 810 Contact:        [email protected]
 811 Description:
 812                 Reports the day of month when the device has been manufactured.
 813
 814                 Access: Read
 815                 Valid values: 1-31
 816
 817 What:           /sys/class/power_supply/<supply_name>/extensions/<extension_name>
 818 Date:           March 2025
 819 Contact:        [email protected]
 820 Description:
 821                 Reports the extensions registered to the power supply.
 822                 Each entry is a link to the device which registered the extension.
 823
 824                 Access: Read