4 * Copyright 2001 VA Linux Systems, Inc., Sunnyvale, California.
9 * Permission is hereby granted, free of charge, to any person obtaining a
10 * copy of this software and associated documentation files (the "Software"),
11 * to deal in the Software without restriction, including without limitation
12 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
13 * and/or sell copies of the Software, and to permit persons to whom the
14 * Software is furnished to do so, subject to the following conditions:
16 * The above copyright notice and this permission notice (including the next
17 * paragraph) shall be included in all copies or substantial portions of the
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
21 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
22 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
23 * PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
24 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
25 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
26 * DEALINGS IN THE SOFTWARE.
29 #include <linux/debugfs.h>
31 #include <linux/module.h>
32 #include <linux/moduleparam.h>
33 #include <linux/mount.h>
34 #include <linux/slab.h>
35 #include <linux/srcu.h>
37 #include <drm/drm_client.h>
38 #include <drm/drm_drv.h>
41 #include "drm_crtc_internal.h"
42 #include "drm_legacy.h"
43 #include "drm_internal.h"
46 * drm_debug: Enable debug output.
47 * Bitmask of DRM_UT_x. See include/drm/drmP.h for details.
49 unsigned int drm_debug = 0;
50 EXPORT_SYMBOL(drm_debug);
52 MODULE_AUTHOR("Gareth Hughes, Leif Delgass, José Fonseca, Jon Smirl");
53 MODULE_DESCRIPTION("DRM shared core routines");
54 MODULE_LICENSE("GPL and additional rights");
55 MODULE_PARM_DESC(debug, "Enable debug output, where each bit enables a debug category.\n"
56 "\t\tBit 0 (0x01) will enable CORE messages (drm core code)\n"
57 "\t\tBit 1 (0x02) will enable DRIVER messages (drm controller code)\n"
58 "\t\tBit 2 (0x04) will enable KMS messages (modesetting code)\n"
59 "\t\tBit 3 (0x08) will enable PRIME messages (prime code)\n"
60 "\t\tBit 4 (0x10) will enable ATOMIC messages (atomic code)\n"
61 "\t\tBit 5 (0x20) will enable VBL messages (vblank code)\n"
62 "\t\tBit 7 (0x80) will enable LEASE messages (leasing code)\n"
63 "\t\tBit 8 (0x100) will enable DP messages (displayport code)");
64 module_param_named(debug, drm_debug, int, 0600);
66 static DEFINE_SPINLOCK(drm_minor_lock);
67 static struct idr drm_minors_idr;
70 * If the drm core fails to init for whatever reason,
71 * we should prevent any drivers from registering with it.
72 * It's best to check this at drm_dev_init(), as some drivers
73 * prefer to embed struct drm_device into their own device
74 * structure and call drm_dev_init() themselves.
76 static bool drm_core_init_complete = false;
78 static struct dentry *drm_debugfs_root;
80 DEFINE_STATIC_SRCU(drm_unplug_srcu);
84 * A DRM device can provide several char-dev interfaces on the DRM-Major. Each
85 * of them is represented by a drm_minor object. Depending on the capabilities
86 * of the device-driver, different interfaces are registered.
88 * Minors can be accessed via dev->$minor_name. This pointer is either
89 * NULL or a valid drm_minor pointer and stays valid as long as the device is
90 * valid. This means, DRM minors have the same life-time as the underlying
91 * device. However, this doesn't mean that the minor is active. Minors are
92 * registered and unregistered dynamically according to device-state.
95 static struct drm_minor **drm_minor_get_slot(struct drm_device *dev,
99 case DRM_MINOR_PRIMARY:
100 return &dev->primary;
101 case DRM_MINOR_RENDER:
108 static int drm_minor_alloc(struct drm_device *dev, unsigned int type)
110 struct drm_minor *minor;
114 minor = kzalloc(sizeof(*minor), GFP_KERNEL);
121 idr_preload(GFP_KERNEL);
122 spin_lock_irqsave(&drm_minor_lock, flags);
123 r = idr_alloc(&drm_minors_idr,
128 spin_unlock_irqrestore(&drm_minor_lock, flags);
136 minor->kdev = drm_sysfs_minor_alloc(minor);
137 if (IS_ERR(minor->kdev)) {
138 r = PTR_ERR(minor->kdev);
142 *drm_minor_get_slot(dev, type) = minor;
146 spin_lock_irqsave(&drm_minor_lock, flags);
147 idr_remove(&drm_minors_idr, minor->index);
148 spin_unlock_irqrestore(&drm_minor_lock, flags);
154 static void drm_minor_free(struct drm_device *dev, unsigned int type)
156 struct drm_minor **slot, *minor;
159 slot = drm_minor_get_slot(dev, type);
164 put_device(minor->kdev);
166 spin_lock_irqsave(&drm_minor_lock, flags);
167 idr_remove(&drm_minors_idr, minor->index);
168 spin_unlock_irqrestore(&drm_minor_lock, flags);
174 static int drm_minor_register(struct drm_device *dev, unsigned int type)
176 struct drm_minor *minor;
182 minor = *drm_minor_get_slot(dev, type);
186 ret = drm_debugfs_init(minor, minor->index, drm_debugfs_root);
188 DRM_ERROR("DRM: Failed to initialize /sys/kernel/debug/dri.\n");
192 ret = device_add(minor->kdev);
196 /* replace NULL with @minor so lookups will succeed from now on */
197 spin_lock_irqsave(&drm_minor_lock, flags);
198 idr_replace(&drm_minors_idr, minor, minor->index);
199 spin_unlock_irqrestore(&drm_minor_lock, flags);
201 DRM_DEBUG("new minor registered %d\n", minor->index);
205 drm_debugfs_cleanup(minor);
209 static void drm_minor_unregister(struct drm_device *dev, unsigned int type)
211 struct drm_minor *minor;
214 minor = *drm_minor_get_slot(dev, type);
215 if (!minor || !device_is_registered(minor->kdev))
218 /* replace @minor with NULL so lookups will fail from now on */
219 spin_lock_irqsave(&drm_minor_lock, flags);
220 idr_replace(&drm_minors_idr, NULL, minor->index);
221 spin_unlock_irqrestore(&drm_minor_lock, flags);
223 device_del(minor->kdev);
224 dev_set_drvdata(minor->kdev, NULL); /* safety belt */
225 drm_debugfs_cleanup(minor);
229 * Looks up the given minor-ID and returns the respective DRM-minor object. The
230 * refence-count of the underlying device is increased so you must release this
231 * object with drm_minor_release().
233 * As long as you hold this minor, it is guaranteed that the object and the
234 * minor->dev pointer will stay valid! However, the device may get unplugged and
235 * unregistered while you hold the minor.
237 struct drm_minor *drm_minor_acquire(unsigned int minor_id)
239 struct drm_minor *minor;
242 spin_lock_irqsave(&drm_minor_lock, flags);
243 minor = idr_find(&drm_minors_idr, minor_id);
245 drm_dev_get(minor->dev);
246 spin_unlock_irqrestore(&drm_minor_lock, flags);
249 return ERR_PTR(-ENODEV);
250 } else if (drm_dev_is_unplugged(minor->dev)) {
251 drm_dev_put(minor->dev);
252 return ERR_PTR(-ENODEV);
258 void drm_minor_release(struct drm_minor *minor)
260 drm_dev_put(minor->dev);
264 * DOC: driver instance overview
266 * A device instance for a drm driver is represented by &struct drm_device. This
267 * is initialized with drm_dev_init(), usually from bus-specific ->probe()
268 * callbacks implemented by the driver. The driver then needs to initialize all
269 * the various subsystems for the drm device like memory management, vblank
270 * handling, modesetting support and intial output configuration plus obviously
271 * initialize all the corresponding hardware bits. Finally when everything is up
272 * and running and ready for userspace the device instance can be published
273 * using drm_dev_register().
275 * There is also deprecated support for initalizing device instances using
276 * bus-specific helpers and the &drm_driver.load callback. But due to
277 * backwards-compatibility needs the device instance have to be published too
278 * early, which requires unpretty global locking to make safe and is therefore
279 * only support for existing drivers not yet converted to the new scheme.
281 * When cleaning up a device instance everything needs to be done in reverse:
282 * First unpublish the device instance with drm_dev_unregister(). Then clean up
283 * any other resources allocated at device initialization and drop the driver's
284 * reference to &drm_device using drm_dev_put().
286 * Note that the lifetime rules for &drm_device instance has still a lot of
287 * historical baggage. Hence use the reference counting provided by
288 * drm_dev_get() and drm_dev_put() only carefully.
290 * Display driver example
291 * ~~~~~~~~~~~~~~~~~~~~~~
293 * The following example shows a typical structure of a DRM display driver.
294 * The example focus on the probe() function and the other functions that is
295 * almost always present and serves as a demonstration of devm_drm_dev_init()
296 * usage with its accompanying drm_driver->release callback.
300 * struct driver_device {
301 * struct drm_device drm;
302 * void *userspace_facing;
306 * static void driver_drm_release(struct drm_device *drm)
308 * struct driver_device *priv = container_of(...);
310 * drm_mode_config_cleanup(drm);
312 * kfree(priv->userspace_facing);
316 * static struct drm_driver driver_drm_driver = {
318 * .release = driver_drm_release,
321 * static int driver_probe(struct platform_device *pdev)
323 * struct driver_device *priv;
324 * struct drm_device *drm;
328 * devm_kzalloc() can't be used here because the drm_device
329 * lifetime can exceed the device lifetime if driver unbind
330 * happens when userspace still has open file descriptors.
332 * priv = kzalloc(sizeof(*priv), GFP_KERNEL);
338 * ret = devm_drm_dev_init(&pdev->dev, drm, &driver_drm_driver);
344 * drm_mode_config_init(drm);
346 * priv->userspace_facing = kzalloc(..., GFP_KERNEL);
347 * if (!priv->userspace_facing)
350 * priv->pclk = devm_clk_get(dev, "PCLK");
351 * if (IS_ERR(priv->pclk))
352 * return PTR_ERR(priv->pclk);
354 * [ Further setup, display pipeline etc ]
356 * platform_set_drvdata(pdev, drm);
358 * drm_mode_config_reset(drm);
360 * ret = drm_dev_register(drm);
364 * drm_fbdev_generic_setup(drm, 32);
369 * [ This function is called before the devm_ resources are released ]
370 * static int driver_remove(struct platform_device *pdev)
372 * struct drm_device *drm = platform_get_drvdata(pdev);
374 * drm_dev_unregister(drm);
375 * drm_atomic_helper_shutdown(drm)
380 * [ This function is called on kernel restart and shutdown ]
381 * static void driver_shutdown(struct platform_device *pdev)
383 * drm_atomic_helper_shutdown(platform_get_drvdata(pdev));
386 * static int __maybe_unused driver_pm_suspend(struct device *dev)
388 * return drm_mode_config_helper_suspend(dev_get_drvdata(dev));
391 * static int __maybe_unused driver_pm_resume(struct device *dev)
393 * drm_mode_config_helper_resume(dev_get_drvdata(dev));
398 * static const struct dev_pm_ops driver_pm_ops = {
399 * SET_SYSTEM_SLEEP_PM_OPS(driver_pm_suspend, driver_pm_resume)
402 * static struct platform_driver driver_driver = {
405 * .pm = &driver_pm_ops,
407 * .probe = driver_probe,
408 * .remove = driver_remove,
409 * .shutdown = driver_shutdown,
411 * module_platform_driver(driver_driver);
413 * Drivers that want to support device unplugging (USB, DT overlay unload) should
414 * use drm_dev_unplug() instead of drm_dev_unregister(). The driver must protect
415 * regions that is accessing device resources to prevent use after they're
416 * released. This is done using drm_dev_enter() and drm_dev_exit(). There is one
417 * shortcoming however, drm_dev_unplug() marks the drm_device as unplugged before
418 * drm_atomic_helper_shutdown() is called. This means that if the disable code
419 * paths are protected, they will not run on regular driver module unload,
420 * possibily leaving the hardware enabled.
424 * drm_put_dev - Unregister and release a DRM device
427 * Called at module unload time or when a PCI device is unplugged.
429 * Cleans up all DRM device, calling drm_lastclose().
431 * Note: Use of this function is deprecated. It will eventually go away
432 * completely. Please use drm_dev_unregister() and drm_dev_put() explicitly
433 * instead to make sure that the device isn't userspace accessible any more
434 * while teardown is in progress, ensuring that userspace can't access an
435 * inconsistent state.
437 void drm_put_dev(struct drm_device *dev)
442 DRM_ERROR("cleanup called no dev\n");
446 drm_dev_unregister(dev);
449 EXPORT_SYMBOL(drm_put_dev);
452 * drm_dev_enter - Enter device critical section
454 * @idx: Pointer to index that will be passed to the matching drm_dev_exit()
456 * This function marks and protects the beginning of a section that should not
457 * be entered after the device has been unplugged. The section end is marked
458 * with drm_dev_exit(). Calls to this function can be nested.
461 * True if it is OK to enter the section, false otherwise.
463 bool drm_dev_enter(struct drm_device *dev, int *idx)
465 *idx = srcu_read_lock(&drm_unplug_srcu);
467 if (dev->unplugged) {
468 srcu_read_unlock(&drm_unplug_srcu, *idx);
474 EXPORT_SYMBOL(drm_dev_enter);
477 * drm_dev_exit - Exit device critical section
478 * @idx: index returned from drm_dev_enter()
480 * This function marks the end of a section that should not be entered after
481 * the device has been unplugged.
483 void drm_dev_exit(int idx)
485 srcu_read_unlock(&drm_unplug_srcu, idx);
487 EXPORT_SYMBOL(drm_dev_exit);
490 * drm_dev_unplug - unplug a DRM device
493 * This unplugs a hotpluggable DRM device, which makes it inaccessible to
494 * userspace operations. Entry-points can use drm_dev_enter() and
495 * drm_dev_exit() to protect device resources in a race free manner. This
496 * essentially unregisters the device like drm_dev_unregister(), but can be
497 * called while there are still open users of @dev.
499 void drm_dev_unplug(struct drm_device *dev)
502 * After synchronizing any critical read section is guaranteed to see
503 * the new value of ->unplugged, and any critical section which might
504 * still have seen the old value of ->unplugged is guaranteed to have
507 dev->unplugged = true;
508 synchronize_srcu(&drm_unplug_srcu);
510 drm_dev_unregister(dev);
512 EXPORT_SYMBOL(drm_dev_unplug);
516 * We want to be able to allocate our own "struct address_space" to control
517 * memory-mappings in VRAM (or stolen RAM, ...). However, core MM does not allow
518 * stand-alone address_space objects, so we need an underlying inode. As there
519 * is no way to allocate an independent inode easily, we need a fake internal
522 * The drm_fs_inode_new() function allocates a new inode, drm_fs_inode_free()
523 * frees it again. You are allowed to use iget() and iput() to get references to
524 * the inode. But each drm_fs_inode_new() call must be paired with exactly one
525 * drm_fs_inode_free() call (which does not have to be the last iput()).
526 * We use drm_fs_inode_*() to manage our internal VFS mount-point and share it
527 * between multiple inode-users. You could, technically, call
528 * iget() + drm_fs_inode_free() directly after alloc and sometime later do an
529 * iput(), but this way you'd end up with a new vfsmount for each inode.
532 static int drm_fs_cnt;
533 static struct vfsmount *drm_fs_mnt;
535 static const struct dentry_operations drm_fs_dops = {
536 .d_dname = simple_dname,
539 static const struct super_operations drm_fs_sops = {
540 .statfs = simple_statfs,
543 static struct dentry *drm_fs_mount(struct file_system_type *fs_type, int flags,
544 const char *dev_name, void *data)
546 return mount_pseudo(fs_type,
553 static struct file_system_type drm_fs_type = {
555 .owner = THIS_MODULE,
556 .mount = drm_fs_mount,
557 .kill_sb = kill_anon_super,
560 static struct inode *drm_fs_inode_new(void)
565 r = simple_pin_fs(&drm_fs_type, &drm_fs_mnt, &drm_fs_cnt);
567 DRM_ERROR("Cannot mount pseudo fs: %d\n", r);
571 inode = alloc_anon_inode(drm_fs_mnt->mnt_sb);
573 simple_release_fs(&drm_fs_mnt, &drm_fs_cnt);
578 static void drm_fs_inode_free(struct inode *inode)
582 simple_release_fs(&drm_fs_mnt, &drm_fs_cnt);
587 * DOC: component helper usage recommendations
589 * DRM drivers that drive hardware where a logical device consists of a pile of
590 * independent hardware blocks are recommended to use the :ref:`component helper
591 * library<component>`. For consistency and better options for code reuse the
592 * following guidelines apply:
594 * - The entire device initialization procedure should be run from the
595 * &component_master_ops.master_bind callback, starting with drm_dev_init(),
596 * then binding all components with component_bind_all() and finishing with
597 * drm_dev_register().
599 * - The opaque pointer passed to all components through component_bind_all()
600 * should point at &struct drm_device of the device instance, not some driver
601 * specific private structure.
603 * - The component helper fills the niche where further standardization of
604 * interfaces is not practical. When there already is, or will be, a
605 * standardized interface like &drm_bridge or &drm_panel, providing its own
606 * functions to find such components at driver load time, like
607 * drm_of_find_panel_or_bridge(), then the component helper should not be
612 * drm_dev_init - Initialise new DRM device
614 * @driver: DRM driver
615 * @parent: Parent device object
617 * Initialize a new DRM device. No device registration is done.
618 * Call drm_dev_register() to advertice the device to user space and register it
619 * with other core subsystems. This should be done last in the device
620 * initialization sequence to make sure userspace can't access an inconsistent
623 * The initial ref-count of the object is 1. Use drm_dev_get() and
624 * drm_dev_put() to take and drop further ref-counts.
626 * It is recommended that drivers embed &struct drm_device into their own device
629 * Drivers that do not want to allocate their own device struct
630 * embedding &struct drm_device can call drm_dev_alloc() instead. For drivers
631 * that do embed &struct drm_device it must be placed first in the overall
632 * structure, and the overall structure must be allocated using kmalloc(): The
633 * drm core's release function unconditionally calls kfree() on the @dev pointer
634 * when the final reference is released. To override this behaviour, and so
635 * allow embedding of the drm_device inside the driver's device struct at an
636 * arbitrary offset, you must supply a &drm_driver.release callback and control
637 * the finalization explicitly.
640 * 0 on success, or error code on failure.
642 int drm_dev_init(struct drm_device *dev,
643 struct drm_driver *driver,
644 struct device *parent)
648 if (!drm_core_init_complete) {
649 DRM_ERROR("DRM core is not initialized\n");
655 kref_init(&dev->ref);
656 dev->dev = get_device(parent);
657 dev->driver = driver;
659 /* no per-device feature limits by default */
660 dev->driver_features = ~0u;
662 drm_legacy_init_members(dev);
663 INIT_LIST_HEAD(&dev->filelist);
664 INIT_LIST_HEAD(&dev->filelist_internal);
665 INIT_LIST_HEAD(&dev->clientlist);
666 INIT_LIST_HEAD(&dev->vblank_event_list);
668 spin_lock_init(&dev->event_lock);
669 mutex_init(&dev->struct_mutex);
670 mutex_init(&dev->filelist_mutex);
671 mutex_init(&dev->clientlist_mutex);
672 mutex_init(&dev->master_mutex);
674 dev->anon_inode = drm_fs_inode_new();
675 if (IS_ERR(dev->anon_inode)) {
676 ret = PTR_ERR(dev->anon_inode);
677 DRM_ERROR("Cannot allocate anonymous inode: %d\n", ret);
681 if (drm_core_check_feature(dev, DRIVER_RENDER)) {
682 ret = drm_minor_alloc(dev, DRM_MINOR_RENDER);
687 ret = drm_minor_alloc(dev, DRM_MINOR_PRIMARY);
691 ret = drm_legacy_create_map_hash(dev);
695 drm_legacy_ctxbitmap_init(dev);
697 if (drm_core_check_feature(dev, DRIVER_GEM)) {
698 ret = drm_gem_init(dev);
700 DRM_ERROR("Cannot initialize graphics execution manager (GEM)\n");
705 ret = drm_dev_set_unique(dev, dev_name(parent));
712 if (drm_core_check_feature(dev, DRIVER_GEM))
713 drm_gem_destroy(dev);
715 drm_legacy_ctxbitmap_cleanup(dev);
716 drm_legacy_remove_map_hash(dev);
718 drm_minor_free(dev, DRM_MINOR_PRIMARY);
719 drm_minor_free(dev, DRM_MINOR_RENDER);
720 drm_fs_inode_free(dev->anon_inode);
722 put_device(dev->dev);
723 mutex_destroy(&dev->master_mutex);
724 mutex_destroy(&dev->clientlist_mutex);
725 mutex_destroy(&dev->filelist_mutex);
726 mutex_destroy(&dev->struct_mutex);
727 drm_legacy_destroy_members(dev);
730 EXPORT_SYMBOL(drm_dev_init);
732 static void devm_drm_dev_init_release(void *data)
738 * devm_drm_dev_init - Resource managed drm_dev_init()
739 * @parent: Parent device object
741 * @driver: DRM driver
743 * Managed drm_dev_init(). The DRM device initialized with this function is
744 * automatically put on driver detach using drm_dev_put(). You must supply a
745 * &drm_driver.release callback to control the finalization explicitly.
748 * 0 on success, or error code on failure.
750 int devm_drm_dev_init(struct device *parent,
751 struct drm_device *dev,
752 struct drm_driver *driver)
756 if (WARN_ON(!parent || !driver->release))
759 ret = drm_dev_init(dev, driver, parent);
763 ret = devm_add_action(parent, devm_drm_dev_init_release, dev);
765 devm_drm_dev_init_release(dev);
769 EXPORT_SYMBOL(devm_drm_dev_init);
772 * drm_dev_fini - Finalize a dead DRM device
775 * Finalize a dead DRM device. This is the converse to drm_dev_init() and
776 * frees up all data allocated by it. All driver private data should be
777 * finalized first. Note that this function does not free the @dev, that is
778 * left to the caller.
780 * The ref-count of @dev must be zero, and drm_dev_fini() should only be called
781 * from a &drm_driver.release callback.
783 void drm_dev_fini(struct drm_device *dev)
785 drm_vblank_cleanup(dev);
787 if (drm_core_check_feature(dev, DRIVER_GEM))
788 drm_gem_destroy(dev);
790 drm_legacy_ctxbitmap_cleanup(dev);
791 drm_legacy_remove_map_hash(dev);
792 drm_fs_inode_free(dev->anon_inode);
794 drm_minor_free(dev, DRM_MINOR_PRIMARY);
795 drm_minor_free(dev, DRM_MINOR_RENDER);
797 put_device(dev->dev);
799 mutex_destroy(&dev->master_mutex);
800 mutex_destroy(&dev->clientlist_mutex);
801 mutex_destroy(&dev->filelist_mutex);
802 mutex_destroy(&dev->struct_mutex);
803 drm_legacy_destroy_members(dev);
806 EXPORT_SYMBOL(drm_dev_fini);
809 * drm_dev_alloc - Allocate new DRM device
810 * @driver: DRM driver to allocate device for
811 * @parent: Parent device object
813 * Allocate and initialize a new DRM device. No device registration is done.
814 * Call drm_dev_register() to advertice the device to user space and register it
815 * with other core subsystems. This should be done last in the device
816 * initialization sequence to make sure userspace can't access an inconsistent
819 * The initial ref-count of the object is 1. Use drm_dev_get() and
820 * drm_dev_put() to take and drop further ref-counts.
822 * Note that for purely virtual devices @parent can be NULL.
824 * Drivers that wish to subclass or embed &struct drm_device into their
825 * own struct should look at using drm_dev_init() instead.
828 * Pointer to new DRM device, or ERR_PTR on failure.
830 struct drm_device *drm_dev_alloc(struct drm_driver *driver,
831 struct device *parent)
833 struct drm_device *dev;
836 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
838 return ERR_PTR(-ENOMEM);
840 ret = drm_dev_init(dev, driver, parent);
848 EXPORT_SYMBOL(drm_dev_alloc);
850 static void drm_dev_release(struct kref *ref)
852 struct drm_device *dev = container_of(ref, struct drm_device, ref);
854 if (dev->driver->release) {
855 dev->driver->release(dev);
863 * drm_dev_get - Take reference of a DRM device
864 * @dev: device to take reference of or NULL
866 * This increases the ref-count of @dev by one. You *must* already own a
867 * reference when calling this. Use drm_dev_put() to drop this reference
870 * This function never fails. However, this function does not provide *any*
871 * guarantee whether the device is alive or running. It only provides a
872 * reference to the object and the memory associated with it.
874 void drm_dev_get(struct drm_device *dev)
879 EXPORT_SYMBOL(drm_dev_get);
882 * drm_dev_put - Drop reference of a DRM device
883 * @dev: device to drop reference of or NULL
885 * This decreases the ref-count of @dev by one. The device is destroyed if the
886 * ref-count drops to zero.
888 void drm_dev_put(struct drm_device *dev)
891 kref_put(&dev->ref, drm_dev_release);
893 EXPORT_SYMBOL(drm_dev_put);
895 static int create_compat_control_link(struct drm_device *dev)
897 struct drm_minor *minor;
901 if (!drm_core_check_feature(dev, DRIVER_MODESET))
904 minor = *drm_minor_get_slot(dev, DRM_MINOR_PRIMARY);
909 * Some existing userspace out there uses the existing of the controlD*
910 * sysfs files to figure out whether it's a modeset driver. It only does
911 * readdir, hence a symlink is sufficient (and the least confusing
912 * option). Otherwise controlD* is entirely unused.
914 * Old controlD chardev have been allocated in the range
917 name = kasprintf(GFP_KERNEL, "controlD%d", minor->index + 64);
921 ret = sysfs_create_link(minor->kdev->kobj.parent,
930 static void remove_compat_control_link(struct drm_device *dev)
932 struct drm_minor *minor;
935 if (!drm_core_check_feature(dev, DRIVER_MODESET))
938 minor = *drm_minor_get_slot(dev, DRM_MINOR_PRIMARY);
942 name = kasprintf(GFP_KERNEL, "controlD%d", minor->index + 64);
946 sysfs_remove_link(minor->kdev->kobj.parent, name);
952 * drm_dev_register - Register DRM device
953 * @dev: Device to register
954 * @flags: Flags passed to the driver's .load() function
956 * Register the DRM device @dev with the system, advertise device to user-space
957 * and start normal device operation. @dev must be initialized via drm_dev_init()
960 * Never call this twice on any device!
962 * NOTE: To ensure backward compatibility with existing drivers method this
963 * function calls the &drm_driver.load method after registering the device
964 * nodes, creating race conditions. Usage of the &drm_driver.load methods is
965 * therefore deprecated, drivers must perform all initialization before calling
966 * drm_dev_register().
969 * 0 on success, negative error code on failure.
971 int drm_dev_register(struct drm_device *dev, unsigned long flags)
973 struct drm_driver *driver = dev->driver;
976 mutex_lock(&drm_global_mutex);
978 ret = drm_minor_register(dev, DRM_MINOR_RENDER);
982 ret = drm_minor_register(dev, DRM_MINOR_PRIMARY);
986 ret = create_compat_control_link(dev);
990 dev->registered = true;
992 if (dev->driver->load) {
993 ret = dev->driver->load(dev, flags);
998 if (drm_core_check_feature(dev, DRIVER_MODESET))
999 drm_modeset_register_all(dev);
1003 DRM_INFO("Initialized %s %d.%d.%d %s for %s on minor %d\n",
1004 driver->name, driver->major, driver->minor,
1005 driver->patchlevel, driver->date,
1006 dev->dev ? dev_name(dev->dev) : "virtual device",
1007 dev->primary->index);
1012 remove_compat_control_link(dev);
1013 drm_minor_unregister(dev, DRM_MINOR_PRIMARY);
1014 drm_minor_unregister(dev, DRM_MINOR_RENDER);
1016 mutex_unlock(&drm_global_mutex);
1019 EXPORT_SYMBOL(drm_dev_register);
1022 * drm_dev_unregister - Unregister DRM device
1023 * @dev: Device to unregister
1025 * Unregister the DRM device from the system. This does the reverse of
1026 * drm_dev_register() but does not deallocate the device. The caller must call
1027 * drm_dev_put() to drop their final reference.
1029 * A special form of unregistering for hotpluggable devices is drm_dev_unplug(),
1030 * which can be called while there are still open users of @dev.
1032 * This should be called first in the device teardown code to make sure
1033 * userspace can't access the device instance any more.
1035 void drm_dev_unregister(struct drm_device *dev)
1037 if (drm_core_check_feature(dev, DRIVER_LEGACY))
1040 dev->registered = false;
1042 drm_client_dev_unregister(dev);
1044 if (drm_core_check_feature(dev, DRIVER_MODESET))
1045 drm_modeset_unregister_all(dev);
1047 if (dev->driver->unload)
1048 dev->driver->unload(dev);
1051 drm_pci_agp_destroy(dev);
1053 drm_legacy_rmmaps(dev);
1055 remove_compat_control_link(dev);
1056 drm_minor_unregister(dev, DRM_MINOR_PRIMARY);
1057 drm_minor_unregister(dev, DRM_MINOR_RENDER);
1059 EXPORT_SYMBOL(drm_dev_unregister);
1062 * drm_dev_set_unique - Set the unique name of a DRM device
1063 * @dev: device of which to set the unique name
1064 * @name: unique name
1066 * Sets the unique name of a DRM device using the specified string. This is
1067 * already done by drm_dev_init(), drivers should only override the default
1068 * unique name for backwards compatibility reasons.
1070 * Return: 0 on success or a negative error code on failure.
1072 int drm_dev_set_unique(struct drm_device *dev, const char *name)
1075 dev->unique = kstrdup(name, GFP_KERNEL);
1077 return dev->unique ? 0 : -ENOMEM;
1079 EXPORT_SYMBOL(drm_dev_set_unique);
1083 * The DRM core module initializes all global DRM objects and makes them
1084 * available to drivers. Once setup, drivers can probe their respective
1086 * Currently, core management includes:
1087 * - The "DRM-Global" key/value database
1088 * - Global ID management for connectors
1089 * - DRM major number allocation
1090 * - DRM minor management
1092 * - DRM debugfs root
1094 * Furthermore, the DRM core provides dynamic char-dev lookups. For each
1095 * interface registered on a DRM device, you can request minor numbers from DRM
1096 * core. DRM core takes care of major-number management and char-dev
1097 * registration. A stub ->open() callback forwards any open() requests to the
1101 static int drm_stub_open(struct inode *inode, struct file *filp)
1103 const struct file_operations *new_fops;
1104 struct drm_minor *minor;
1109 mutex_lock(&drm_global_mutex);
1110 minor = drm_minor_acquire(iminor(inode));
1111 if (IS_ERR(minor)) {
1112 err = PTR_ERR(minor);
1116 new_fops = fops_get(minor->dev->driver->fops);
1122 replace_fops(filp, new_fops);
1123 if (filp->f_op->open)
1124 err = filp->f_op->open(inode, filp);
1129 drm_minor_release(minor);
1131 mutex_unlock(&drm_global_mutex);
1135 static const struct file_operations drm_stub_fops = {
1136 .owner = THIS_MODULE,
1137 .open = drm_stub_open,
1138 .llseek = noop_llseek,
1141 static void drm_core_exit(void)
1143 unregister_chrdev(DRM_MAJOR, "drm");
1144 debugfs_remove(drm_debugfs_root);
1145 drm_sysfs_destroy();
1146 idr_destroy(&drm_minors_idr);
1147 drm_connector_ida_destroy();
1150 static int __init drm_core_init(void)
1154 drm_connector_ida_init();
1155 idr_init(&drm_minors_idr);
1157 ret = drm_sysfs_init();
1159 DRM_ERROR("Cannot create DRM class: %d\n", ret);
1163 drm_debugfs_root = debugfs_create_dir("dri", NULL);
1164 if (!drm_debugfs_root) {
1166 DRM_ERROR("Cannot create debugfs-root: %d\n", ret);
1170 ret = register_chrdev(DRM_MAJOR, "drm", &drm_stub_fops);
1174 drm_core_init_complete = true;
1176 DRM_DEBUG("Initialized\n");
1184 module_init(drm_core_init);
1185 module_exit(drm_core_exit);