drivers/i2c/busses/i2c-aspeed.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  *  Aspeed 24XX/25XX I2C Controller.
   4  *
   5  *  Copyright (C) 2012-2017 ASPEED Technology Inc.
   6  *  Copyright 2017 IBM Corporation
   7  *  Copyright 2017 Google, Inc.
   8  */
   9
  10 #include <linux/clk.h>
  11 #include <linux/completion.h>
  12 #include <linux/err.h>
  13 #include <linux/errno.h>
  14 #include <linux/i2c.h>
  15 #include <linux/init.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/io.h>
  18 #include <linux/irq.h>
  19 #include <linux/irqchip/chained_irq.h>
  20 #include <linux/irqdomain.h>
  21 #include <linux/kernel.h>
  22 #include <linux/module.h>
  23 #include <linux/of_address.h>
  24 #include <linux/of_irq.h>
  25 #include <linux/of_platform.h>
  26 #include <linux/platform_device.h>
  27 #include <linux/reset.h>
  28 #include <linux/slab.h>
  29
  30 /* I2C Register */
  31 #define ASPEED_I2C_FUN_CTRL_REG                         0x00
  32 #define ASPEED_I2C_AC_TIMING_REG1                       0x04
  33 #define ASPEED_I2C_AC_TIMING_REG2                       0x08
  34 #define ASPEED_I2C_INTR_CTRL_REG                        0x0c
  35 #define ASPEED_I2C_INTR_STS_REG                         0x10
  36 #define ASPEED_I2C_CMD_REG                              0x14
  37 #define ASPEED_I2C_DEV_ADDR_REG                         0x18
  38 #define ASPEED_I2C_BYTE_BUF_REG                         0x20
  39
  40 /* Global Register Definition */
  41 /* 0x00 : I2C Interrupt Status Register  */
  42 /* 0x08 : I2C Interrupt Target Assignment  */
  43
  44 /* Device Register Definition */
  45 /* 0x00 : I2CD Function Control Register  */
  46 #define ASPEED_I2CD_MULTI_MASTER_DIS                    BIT(15)
  47 #define ASPEED_I2CD_SDA_DRIVE_1T_EN                     BIT(8)
  48 #define ASPEED_I2CD_M_SDA_DRIVE_1T_EN                   BIT(7)
  49 #define ASPEED_I2CD_M_HIGH_SPEED_EN                     BIT(6)
  50 #define ASPEED_I2CD_SLAVE_EN                            BIT(1)
  51 #define ASPEED_I2CD_MASTER_EN                           BIT(0)
  52
  53 /* 0x04 : I2CD Clock and AC Timing Control Register #1 */
  54 #define ASPEED_I2CD_TIME_TBUF_MASK                      GENMASK(31, 28)
  55 #define ASPEED_I2CD_TIME_THDSTA_MASK                    GENMASK(27, 24)
  56 #define ASPEED_I2CD_TIME_TACST_MASK                     GENMASK(23, 20)
  57 #define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT                 16
  58 #define ASPEED_I2CD_TIME_SCL_HIGH_MASK                  GENMASK(19, 16)
  59 #define ASPEED_I2CD_TIME_SCL_LOW_SHIFT                  12
  60 #define ASPEED_I2CD_TIME_SCL_LOW_MASK                   GENMASK(15, 12)
  61 #define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK              GENMASK(3, 0)
  62 #define ASPEED_I2CD_TIME_SCL_REG_MAX                    GENMASK(3, 0)
  63 /* 0x08 : I2CD Clock and AC Timing Control Register #2 */
  64 #define ASPEED_NO_TIMEOUT_CTRL                          0
  65
  66 /* 0x0c : I2CD Interrupt Control Register &
  67  * 0x10 : I2CD Interrupt Status Register
  68  *
  69  * These share bit definitions, so use the same values for the enable &
  70  * status bits.
  71  */
  72 #define ASPEED_I2CD_INTR_RECV_MASK                      0xf000ffff
  73 #define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT                 BIT(14)
  74 #define ASPEED_I2CD_INTR_BUS_RECOVER_DONE               BIT(13)
  75 #define ASPEED_I2CD_INTR_SLAVE_MATCH                    BIT(7)
  76 #define ASPEED_I2CD_INTR_SCL_TIMEOUT                    BIT(6)
  77 #define ASPEED_I2CD_INTR_ABNORMAL                       BIT(5)
  78 #define ASPEED_I2CD_INTR_NORMAL_STOP                    BIT(4)
  79 #define ASPEED_I2CD_INTR_ARBIT_LOSS                     BIT(3)
  80 #define ASPEED_I2CD_INTR_RX_DONE                        BIT(2)
  81 #define ASPEED_I2CD_INTR_TX_NAK                         BIT(1)
  82 #define ASPEED_I2CD_INTR_TX_ACK                         BIT(0)
  83 #define ASPEED_I2CD_INTR_MASTER_ERRORS                                         \
  84                 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |                             \
  85                  ASPEED_I2CD_INTR_SCL_TIMEOUT |                                \
  86                  ASPEED_I2CD_INTR_ABNORMAL |                                   \
  87                  ASPEED_I2CD_INTR_ARBIT_LOSS)
  88 #define ASPEED_I2CD_INTR_ALL                                                   \
  89                 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |                             \
  90                  ASPEED_I2CD_INTR_BUS_RECOVER_DONE |                           \
  91                  ASPEED_I2CD_INTR_SCL_TIMEOUT |                                \
  92                  ASPEED_I2CD_INTR_ABNORMAL |                                   \
  93                  ASPEED_I2CD_INTR_NORMAL_STOP |                                \
  94                  ASPEED_I2CD_INTR_ARBIT_LOSS |                                 \
  95                  ASPEED_I2CD_INTR_RX_DONE |                                    \
  96                  ASPEED_I2CD_INTR_TX_NAK |                                     \
  97                  ASPEED_I2CD_INTR_TX_ACK)
  98
  99 /* 0x14 : I2CD Command/Status Register   */
 100 #define ASPEED_I2CD_SCL_LINE_STS                        BIT(18)
 101 #define ASPEED_I2CD_SDA_LINE_STS                        BIT(17)
 102 #define ASPEED_I2CD_BUS_BUSY_STS                        BIT(16)
 103 #define ASPEED_I2CD_BUS_RECOVER_CMD                     BIT(11)
 104
 105 /* Command Bit */
 106 #define ASPEED_I2CD_M_STOP_CMD                          BIT(5)
 107 #define ASPEED_I2CD_M_S_RX_CMD_LAST                     BIT(4)
 108 #define ASPEED_I2CD_M_RX_CMD                            BIT(3)
 109 #define ASPEED_I2CD_S_TX_CMD                            BIT(2)
 110 #define ASPEED_I2CD_M_TX_CMD                            BIT(1)
 111 #define ASPEED_I2CD_M_START_CMD                         BIT(0)
 112 #define ASPEED_I2CD_MASTER_CMDS_MASK                                           \
 113                 (ASPEED_I2CD_M_STOP_CMD |                                      \
 114                  ASPEED_I2CD_M_S_RX_CMD_LAST |                                 \
 115                  ASPEED_I2CD_M_RX_CMD |                                        \
 116                  ASPEED_I2CD_M_TX_CMD |                                        \
 117                  ASPEED_I2CD_M_START_CMD)
 118
 119 /* 0x18 : I2CD Slave Device Address Register   */
 120 #define ASPEED_I2CD_DEV_ADDR_MASK                       GENMASK(6, 0)
 121
 122 enum aspeed_i2c_master_state {
 123         ASPEED_I2C_MASTER_INACTIVE,
 124         ASPEED_I2C_MASTER_PENDING,
 125         ASPEED_I2C_MASTER_START,
 126         ASPEED_I2C_MASTER_TX_FIRST,
 127         ASPEED_I2C_MASTER_TX,
 128         ASPEED_I2C_MASTER_RX_FIRST,
 129         ASPEED_I2C_MASTER_RX,
 130         ASPEED_I2C_MASTER_STOP,
 131 };
 132
 133 enum aspeed_i2c_slave_state {
 134         ASPEED_I2C_SLAVE_INACTIVE,
 135         ASPEED_I2C_SLAVE_START,
 136         ASPEED_I2C_SLAVE_READ_REQUESTED,
 137         ASPEED_I2C_SLAVE_READ_PROCESSED,
 138         ASPEED_I2C_SLAVE_WRITE_REQUESTED,
 139         ASPEED_I2C_SLAVE_WRITE_RECEIVED,
 140         ASPEED_I2C_SLAVE_STOP,
 141 };
 142
 143 struct aspeed_i2c_bus {
 144         struct i2c_adapter              adap;
 145         struct device                   *dev;
 146         void __iomem                    *base;
 147         struct reset_control            *rst;
 148         /* Synchronizes I/O mem access to base. */
 149         spinlock_t                      lock;
 150         struct completion               cmd_complete;
 151         u32                             (*get_clk_reg_val)(struct device *dev,
 152                                                            u32 divisor);
 153         unsigned long                   parent_clk_frequency;
 154         u32                             bus_frequency;
 155         /* Transaction state. */
 156         enum aspeed_i2c_master_state    master_state;
 157         struct i2c_msg                  *msgs;
 158         size_t                          buf_index;
 159         size_t                          msgs_index;
 160         size_t                          msgs_count;
 161         bool                            send_stop;
 162         int                             cmd_err;
 163         /* Protected only by i2c_lock_bus */
 164         int                             master_xfer_result;
 165         /* Multi-master */
 166         bool                            multi_master;
 167 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 168         struct i2c_client               *slave;
 169         enum aspeed_i2c_slave_state     slave_state;
 170 #endif /* CONFIG_I2C_SLAVE */
 171 };
 172
 173 static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus);
 174
 175 static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
 176 {
 177         unsigned long time_left, flags;
 178         int ret = 0;
 179         u32 command;
 180
 181         spin_lock_irqsave(&bus->lock, flags);
 182         command = readl(bus->base + ASPEED_I2C_CMD_REG);
 183
 184         if (command & ASPEED_I2CD_SDA_LINE_STS) {
 185                 /* Bus is idle: no recovery needed. */
 186                 if (command & ASPEED_I2CD_SCL_LINE_STS)
 187                         goto out;
 188                 dev_dbg(bus->dev, "SCL hung (state %x), attempting recovery\n",
 189                         command);
 190
 191                 reinit_completion(&bus->cmd_complete);
 192                 writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
 193                 spin_unlock_irqrestore(&bus->lock, flags);
 194
 195                 time_left = wait_for_completion_timeout(
 196                                 &bus->cmd_complete, bus->adap.timeout);
 197
 198                 spin_lock_irqsave(&bus->lock, flags);
 199                 if (time_left == 0)
 200                         goto reset_out;
 201                 else if (bus->cmd_err)
 202                         goto reset_out;
 203                 /* Recovery failed. */
 204                 else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
 205                            ASPEED_I2CD_SCL_LINE_STS))
 206                         goto reset_out;
 207         /* Bus error. */
 208         } else {
 209                 dev_dbg(bus->dev, "SDA hung (state %x), attempting recovery\n",
 210                         command);
 211
 212                 reinit_completion(&bus->cmd_complete);
 213                 /* Writes 1 to 8 SCL clock cycles until SDA is released. */
 214                 writel(ASPEED_I2CD_BUS_RECOVER_CMD,
 215                        bus->base + ASPEED_I2C_CMD_REG);
 216                 spin_unlock_irqrestore(&bus->lock, flags);
 217
 218                 time_left = wait_for_completion_timeout(
 219                                 &bus->cmd_complete, bus->adap.timeout);
 220
 221                 spin_lock_irqsave(&bus->lock, flags);
 222                 if (time_left == 0)
 223                         goto reset_out;
 224                 else if (bus->cmd_err)
 225                         goto reset_out;
 226                 /* Recovery failed. */
 227                 else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
 228                            ASPEED_I2CD_SDA_LINE_STS))
 229                         goto reset_out;
 230         }
 231
 232 out:
 233         spin_unlock_irqrestore(&bus->lock, flags);
 234
 235         return ret;
 236
 237 reset_out:
 238         spin_unlock_irqrestore(&bus->lock, flags);
 239
 240         return aspeed_i2c_reset(bus);
 241 }
 242
 243 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 244 static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 245 {
 246         u32 command, irq_handled = 0;
 247         struct i2c_client *slave = bus->slave;
 248         u8 value;
 249
 250         if (!slave)
 251                 return 0;
 252
 253         command = readl(bus->base + ASPEED_I2C_CMD_REG);
 254
 255         /* Slave was requested, restart state machine. */
 256         if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
 257                 irq_handled |= ASPEED_I2CD_INTR_SLAVE_MATCH;
 258                 bus->slave_state = ASPEED_I2C_SLAVE_START;
 259         }
 260
 261         /* Slave is not currently active, irq was for someone else. */
 262         if (bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE)
 263                 return irq_handled;
 264
 265         dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
 266                 irq_status, command);
 267
 268         /* Slave was sent something. */
 269         if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
 270                 value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
 271                 /* Handle address frame. */
 272                 if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
 273                         if (value & 0x1)
 274                                 bus->slave_state =
 275                                                 ASPEED_I2C_SLAVE_READ_REQUESTED;
 276                         else
 277                                 bus->slave_state =
 278                                                 ASPEED_I2C_SLAVE_WRITE_REQUESTED;
 279                 }
 280                 irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
 281         }
 282
 283         /* Slave was asked to stop. */
 284         if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
 285                 irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
 286                 bus->slave_state = ASPEED_I2C_SLAVE_STOP;
 287         }
 288         if (irq_status & ASPEED_I2CD_INTR_TX_NAK &&
 289             bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) {
 290                 irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
 291                 bus->slave_state = ASPEED_I2C_SLAVE_STOP;
 292         }
 293
 294         switch (bus->slave_state) {
 295         case ASPEED_I2C_SLAVE_READ_REQUESTED:
 296                 if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_ACK))
 297                         dev_err(bus->dev, "Unexpected ACK on read request.\n");
 298                 bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
 299                 i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
 300                 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
 301                 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
 302                 break;
 303         case ASPEED_I2C_SLAVE_READ_PROCESSED:
 304                 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
 305                         dev_err(bus->dev,
 306                                 "Expected ACK after processed read.\n");
 307                         break;
 308                 }
 309                 irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
 310                 i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
 311                 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
 312                 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
 313                 break;
 314         case ASPEED_I2C_SLAVE_WRITE_REQUESTED:
 315                 bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
 316                 i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
 317                 break;
 318         case ASPEED_I2C_SLAVE_WRITE_RECEIVED:
 319                 i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
 320                 break;
 321         case ASPEED_I2C_SLAVE_STOP:
 322                 i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
 323                 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
 324                 break;
 325         case ASPEED_I2C_SLAVE_START:
 326                 /* Slave was just started. Waiting for the next event. */;
 327                 break;
 328         default:
 329                 dev_err(bus->dev, "unknown slave_state: %d\n",
 330                         bus->slave_state);
 331                 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
 332                 break;
 333         }
 334
 335         return irq_handled;
 336 }
 337 #endif /* CONFIG_I2C_SLAVE */
 338
 339 /* precondition: bus.lock has been acquired. */
 340 static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
 341 {
 342         u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
 343         struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
 344         u8 slave_addr = i2c_8bit_addr_from_msg(msg);
 345
 346 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 347         /*
 348          * If it's requested in the middle of a slave session, set the master
 349          * state to 'pending' then H/W will continue handling this master
 350          * command when the bus comes back to the idle state.
 351          */
 352         if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) {
 353                 bus->master_state = ASPEED_I2C_MASTER_PENDING;
 354                 return;
 355         }
 356 #endif /* CONFIG_I2C_SLAVE */
 357
 358         bus->master_state = ASPEED_I2C_MASTER_START;
 359         bus->buf_index = 0;
 360
 361         if (msg->flags & I2C_M_RD) {
 362                 command |= ASPEED_I2CD_M_RX_CMD;
 363                 /* Need to let the hardware know to NACK after RX. */
 364                 if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
 365                         command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
 366         }
 367
 368         writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG);
 369         writel(command, bus->base + ASPEED_I2C_CMD_REG);
 370 }
 371
 372 /* precondition: bus.lock has been acquired. */
 373 static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus)
 374 {
 375         bus->master_state = ASPEED_I2C_MASTER_STOP;
 376         writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
 377 }
 378
 379 /* precondition: bus.lock has been acquired. */
 380 static void aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus)
 381 {
 382         if (bus->msgs_index + 1 < bus->msgs_count) {
 383                 bus->msgs_index++;
 384                 aspeed_i2c_do_start(bus);
 385         } else {
 386                 aspeed_i2c_do_stop(bus);
 387         }
 388 }
 389
 390 static int aspeed_i2c_is_irq_error(u32 irq_status)
 391 {
 392         if (irq_status & ASPEED_I2CD_INTR_ARBIT_LOSS)
 393                 return -EAGAIN;
 394         if (irq_status & (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
 395                           ASPEED_I2CD_INTR_SCL_TIMEOUT))
 396                 return -EBUSY;
 397         if (irq_status & (ASPEED_I2CD_INTR_ABNORMAL))
 398                 return -EPROTO;
 399
 400         return 0;
 401 }
 402
 403 static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 404 {
 405         u32 irq_handled = 0, command = 0;
 406         struct i2c_msg *msg;
 407         u8 recv_byte;
 408         int ret;
 409
 410         if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
 411                 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 412                 irq_handled |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
 413                 goto out_complete;
 414         }
 415
 416         /*
 417          * We encountered an interrupt that reports an error: the hardware
 418          * should clear the command queue effectively taking us back to the
 419          * INACTIVE state.
 420          */
 421         ret = aspeed_i2c_is_irq_error(irq_status);
 422         if (ret) {
 423                 dev_dbg(bus->dev, "received error interrupt: 0x%08x\n",
 424                         irq_status);
 425                 irq_handled |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS);
 426                 if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) {
 427                         bus->cmd_err = ret;
 428                         bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 429                         goto out_complete;
 430                 }
 431         }
 432
 433         /* Master is not currently active, irq was for someone else. */
 434         if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE ||
 435             bus->master_state == ASPEED_I2C_MASTER_PENDING)
 436                 goto out_no_complete;
 437
 438         /* We are in an invalid state; reset bus to a known state. */
 439         if (!bus->msgs) {
 440                 dev_err(bus->dev, "bus in unknown state. irq_status: 0x%x\n",
 441                         irq_status);
 442                 bus->cmd_err = -EIO;
 443                 if (bus->master_state != ASPEED_I2C_MASTER_STOP &&
 444                     bus->master_state != ASPEED_I2C_MASTER_INACTIVE)
 445                         aspeed_i2c_do_stop(bus);
 446                 goto out_no_complete;
 447         }
 448         msg = &bus->msgs[bus->msgs_index];
 449
 450         /*
 451          * START is a special case because we still have to handle a subsequent
 452          * TX or RX immediately after we handle it, so we handle it here and
 453          * then update the state and handle the new state below.
 454          */
 455         if (bus->master_state == ASPEED_I2C_MASTER_START) {
 456 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 457                 /*
 458                  * If a peer master starts a xfer immediately after it queues a
 459                  * master command, clear the queued master command and change
 460                  * its state to 'pending'. To simplify handling of pending
 461                  * cases, it uses S/W solution instead of H/W command queue
 462                  * handling.
 463                  */
 464                 if (unlikely(irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH)) {
 465                         writel(readl(bus->base + ASPEED_I2C_CMD_REG) &
 466                                 ~ASPEED_I2CD_MASTER_CMDS_MASK,
 467                                bus->base + ASPEED_I2C_CMD_REG);
 468                         bus->master_state = ASPEED_I2C_MASTER_PENDING;
 469                         dev_dbg(bus->dev,
 470                                 "master goes pending due to a slave start\n");
 471                         goto out_no_complete;
 472                 }
 473 #endif /* CONFIG_I2C_SLAVE */
 474                 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
 475                         if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_NAK))) {
 476                                 bus->cmd_err = -ENXIO;
 477                                 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 478                                 goto out_complete;
 479                         }
 480                         pr_devel("no slave present at %02x\n", msg->addr);
 481                         irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
 482                         bus->cmd_err = -ENXIO;
 483                         aspeed_i2c_do_stop(bus);
 484                         goto out_no_complete;
 485                 }
 486                 irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
 487                 if (msg->len == 0) { /* SMBUS_QUICK */
 488                         aspeed_i2c_do_stop(bus);
 489                         goto out_no_complete;
 490                 }
 491                 if (msg->flags & I2C_M_RD)
 492                         bus->master_state = ASPEED_I2C_MASTER_RX_FIRST;
 493                 else
 494                         bus->master_state = ASPEED_I2C_MASTER_TX_FIRST;
 495         }
 496
 497         switch (bus->master_state) {
 498         case ASPEED_I2C_MASTER_TX:
 499                 if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
 500                         dev_dbg(bus->dev, "slave NACKed TX\n");
 501                         irq_handled |= ASPEED_I2CD_INTR_TX_NAK;
 502                         goto error_and_stop;
 503                 } else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
 504                         dev_err(bus->dev, "slave failed to ACK TX\n");
 505                         goto error_and_stop;
 506                 }
 507                 irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
 508                 fallthrough;
 509         case ASPEED_I2C_MASTER_TX_FIRST:
 510                 if (bus->buf_index < msg->len) {
 511                         bus->master_state = ASPEED_I2C_MASTER_TX;
 512                         writel(msg->buf[bus->buf_index++],
 513                                bus->base + ASPEED_I2C_BYTE_BUF_REG);
 514                         writel(ASPEED_I2CD_M_TX_CMD,
 515                                bus->base + ASPEED_I2C_CMD_REG);
 516                 } else {
 517                         aspeed_i2c_next_msg_or_stop(bus);
 518                 }
 519                 goto out_no_complete;
 520         case ASPEED_I2C_MASTER_RX_FIRST:
 521                 /* RX may not have completed yet (only address cycle) */
 522                 if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE))
 523                         goto out_no_complete;
 524                 fallthrough;
 525         case ASPEED_I2C_MASTER_RX:
 526                 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
 527                         dev_err(bus->dev, "master failed to RX\n");
 528                         goto error_and_stop;
 529                 }
 530                 irq_handled |= ASPEED_I2CD_INTR_RX_DONE;
 531
 532                 recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
 533                 msg->buf[bus->buf_index++] = recv_byte;
 534
 535                 if (msg->flags & I2C_M_RECV_LEN) {
 536                         if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) {
 537                                 bus->cmd_err = -EPROTO;
 538                                 aspeed_i2c_do_stop(bus);
 539                                 goto out_no_complete;
 540                         }
 541                         msg->len = recv_byte +
 542                                         ((msg->flags & I2C_CLIENT_PEC) ? 2 : 1);
 543                         msg->flags &= ~I2C_M_RECV_LEN;
 544                 }
 545
 546                 if (bus->buf_index < msg->len) {
 547                         bus->master_state = ASPEED_I2C_MASTER_RX;
 548                         command = ASPEED_I2CD_M_RX_CMD;
 549                         if (bus->buf_index + 1 == msg->len)
 550                                 command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
 551                         writel(command, bus->base + ASPEED_I2C_CMD_REG);
 552                 } else {
 553                         aspeed_i2c_next_msg_or_stop(bus);
 554                 }
 555                 goto out_no_complete;
 556         case ASPEED_I2C_MASTER_STOP:
 557                 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
 558                         dev_err(bus->dev,
 559                                 "master failed to STOP. irq_status:0x%x\n",
 560                                 irq_status);
 561                         bus->cmd_err = -EIO;
 562                         /* Do not STOP as we have already tried. */
 563                 } else {
 564                         irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP;
 565                 }
 566
 567                 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 568                 goto out_complete;
 569         case ASPEED_I2C_MASTER_INACTIVE:
 570                 dev_err(bus->dev,
 571                         "master received interrupt 0x%08x, but is inactive\n",
 572                         irq_status);
 573                 bus->cmd_err = -EIO;
 574                 /* Do not STOP as we should be inactive. */
 575                 goto out_complete;
 576         default:
 577                 WARN(1, "unknown master state\n");
 578                 bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 579                 bus->cmd_err = -EINVAL;
 580                 goto out_complete;
 581         }
 582 error_and_stop:
 583         bus->cmd_err = -EIO;
 584         aspeed_i2c_do_stop(bus);
 585         goto out_no_complete;
 586 out_complete:
 587         bus->msgs = NULL;
 588         if (bus->cmd_err)
 589                 bus->master_xfer_result = bus->cmd_err;
 590         else
 591                 bus->master_xfer_result = bus->msgs_index + 1;
 592         complete(&bus->cmd_complete);
 593 out_no_complete:
 594         return irq_handled;
 595 }
 596
 597 static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
 598 {
 599         struct aspeed_i2c_bus *bus = dev_id;
 600         u32 irq_received, irq_remaining, irq_handled;
 601
 602         spin_lock(&bus->lock);
 603         irq_received = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
 604         /* Ack all interrupts except for Rx done */
 605         writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
 606                bus->base + ASPEED_I2C_INTR_STS_REG);
 607         readl(bus->base + ASPEED_I2C_INTR_STS_REG);
 608         irq_received &= ASPEED_I2CD_INTR_RECV_MASK;
 609         irq_remaining = irq_received;
 610
 611 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 612         /*
 613          * In most cases, interrupt bits will be set one by one, although
 614          * multiple interrupt bits could be set at the same time. It's also
 615          * possible that master interrupt bits could be set along with slave
 616          * interrupt bits. Each case needs to be handled using corresponding
 617          * handlers depending on the current state.
 618          */
 619         if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE &&
 620             bus->master_state != ASPEED_I2C_MASTER_PENDING) {
 621                 irq_handled = aspeed_i2c_master_irq(bus, irq_remaining);
 622                 irq_remaining &= ~irq_handled;
 623                 if (irq_remaining)
 624                         irq_handled |= aspeed_i2c_slave_irq(bus, irq_remaining);
 625         } else {
 626                 irq_handled = aspeed_i2c_slave_irq(bus, irq_remaining);
 627                 irq_remaining &= ~irq_handled;
 628                 if (irq_remaining)
 629                         irq_handled |= aspeed_i2c_master_irq(bus,
 630                                                              irq_remaining);
 631         }
 632
 633         /*
 634          * Start a pending master command at here if a slave operation is
 635          * completed.
 636          */
 637         if (bus->master_state == ASPEED_I2C_MASTER_PENDING &&
 638             bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE)
 639                 aspeed_i2c_do_start(bus);
 640 #else
 641         irq_handled = aspeed_i2c_master_irq(bus, irq_remaining);
 642 #endif /* CONFIG_I2C_SLAVE */
 643
 644         irq_remaining &= ~irq_handled;
 645         if (irq_remaining)
 646                 dev_err(bus->dev,
 647                         "irq handled != irq. expected 0x%08x, but was 0x%08x\n",
 648                         irq_received, irq_handled);
 649
 650         /* Ack Rx done */
 651         if (irq_received & ASPEED_I2CD_INTR_RX_DONE) {
 652                 writel(ASPEED_I2CD_INTR_RX_DONE,
 653                        bus->base + ASPEED_I2C_INTR_STS_REG);
 654                 readl(bus->base + ASPEED_I2C_INTR_STS_REG);
 655         }
 656         spin_unlock(&bus->lock);
 657         return irq_remaining ? IRQ_NONE : IRQ_HANDLED;
 658 }
 659
 660 static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
 661                                   struct i2c_msg *msgs, int num)
 662 {
 663         struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap);
 664         unsigned long time_left, flags;
 665
 666         spin_lock_irqsave(&bus->lock, flags);
 667         bus->cmd_err = 0;
 668
 669         /* If bus is busy in a single master environment, attempt recovery. */
 670         if (!bus->multi_master &&
 671             (readl(bus->base + ASPEED_I2C_CMD_REG) &
 672              ASPEED_I2CD_BUS_BUSY_STS)) {
 673                 int ret;
 674
 675                 spin_unlock_irqrestore(&bus->lock, flags);
 676                 ret = aspeed_i2c_recover_bus(bus);
 677                 if (ret)
 678                         return ret;
 679                 spin_lock_irqsave(&bus->lock, flags);
 680         }
 681
 682         bus->cmd_err = 0;
 683         bus->msgs = msgs;
 684         bus->msgs_index = 0;
 685         bus->msgs_count = num;
 686
 687         reinit_completion(&bus->cmd_complete);
 688         aspeed_i2c_do_start(bus);
 689         spin_unlock_irqrestore(&bus->lock, flags);
 690
 691         time_left = wait_for_completion_timeout(&bus->cmd_complete,
 692                                                 bus->adap.timeout);
 693
 694         if (time_left == 0) {
 695                 /*
 696                  * If timed out and bus is still busy in a multi master
 697                  * environment, attempt recovery at here.
 698                  */
 699                 if (bus->multi_master &&
 700                     (readl(bus->base + ASPEED_I2C_CMD_REG) &
 701                      ASPEED_I2CD_BUS_BUSY_STS))
 702                         aspeed_i2c_recover_bus(bus);
 703
 704                 /*
 705                  * If timed out and the state is still pending, drop the pending
 706                  * master command.
 707                  */
 708                 spin_lock_irqsave(&bus->lock, flags);
 709                 if (bus->master_state == ASPEED_I2C_MASTER_PENDING)
 710                         bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 711                 spin_unlock_irqrestore(&bus->lock, flags);
 712
 713                 return -ETIMEDOUT;
 714         }
 715
 716         return bus->master_xfer_result;
 717 }
 718
 719 static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
 720 {
 721         return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
 722 }
 723
 724 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 725 /* precondition: bus.lock has been acquired. */
 726 static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr)
 727 {
 728         u32 addr_reg_val, func_ctrl_reg_val;
 729
 730         /* Set slave addr. */
 731         addr_reg_val = readl(bus->base + ASPEED_I2C_DEV_ADDR_REG);
 732         addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
 733         addr_reg_val |= slave_addr & ASPEED_I2CD_DEV_ADDR_MASK;
 734         writel(addr_reg_val, bus->base + ASPEED_I2C_DEV_ADDR_REG);
 735
 736         /* Turn on slave mode. */
 737         func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
 738         func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
 739         writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
 740 }
 741
 742 static int aspeed_i2c_reg_slave(struct i2c_client *client)
 743 {
 744         struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
 745         unsigned long flags;
 746
 747         spin_lock_irqsave(&bus->lock, flags);
 748         if (bus->slave) {
 749                 spin_unlock_irqrestore(&bus->lock, flags);
 750                 return -EINVAL;
 751         }
 752
 753         __aspeed_i2c_reg_slave(bus, client->addr);
 754
 755         bus->slave = client;
 756         bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE;
 757         spin_unlock_irqrestore(&bus->lock, flags);
 758
 759         return 0;
 760 }
 761
 762 static int aspeed_i2c_unreg_slave(struct i2c_client *client)
 763 {
 764         struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
 765         u32 func_ctrl_reg_val;
 766         unsigned long flags;
 767
 768         spin_lock_irqsave(&bus->lock, flags);
 769         if (!bus->slave) {
 770                 spin_unlock_irqrestore(&bus->lock, flags);
 771                 return -EINVAL;
 772         }
 773
 774         /* Turn off slave mode. */
 775         func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
 776         func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
 777         writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
 778
 779         bus->slave = NULL;
 780         spin_unlock_irqrestore(&bus->lock, flags);
 781
 782         return 0;
 783 }
 784 #endif /* CONFIG_I2C_SLAVE */
 785
 786 static const struct i2c_algorithm aspeed_i2c_algo = {
 787         .master_xfer    = aspeed_i2c_master_xfer,
 788         .functionality  = aspeed_i2c_functionality,
 789 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 790         .reg_slave      = aspeed_i2c_reg_slave,
 791         .unreg_slave    = aspeed_i2c_unreg_slave,
 792 #endif /* CONFIG_I2C_SLAVE */
 793 };
 794
 795 static u32 aspeed_i2c_get_clk_reg_val(struct device *dev,
 796                                       u32 clk_high_low_mask,
 797                                       u32 divisor)
 798 {
 799         u32 base_clk_divisor, clk_high_low_max, clk_high, clk_low, tmp;
 800
 801         /*
 802          * SCL_high and SCL_low represent a value 1 greater than what is stored
 803          * since a zero divider is meaningless. Thus, the max value each can
 804          * store is every bit set + 1. Since SCL_high and SCL_low are added
 805          * together (see below), the max value of both is the max value of one
 806          * them times two.
 807          */
 808         clk_high_low_max = (clk_high_low_mask + 1) * 2;
 809
 810         /*
 811          * The actual clock frequency of SCL is:
 812          *      SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low))
 813          *               = APB_freq / divisor
 814          * where base_freq is a programmable clock divider; its value is
 815          *      base_freq = 1 << base_clk_divisor
 816          * SCL_high is the number of base_freq clock cycles that SCL stays high
 817          * and SCL_low is the number of base_freq clock cycles that SCL stays
 818          * low for a period of SCL.
 819          * The actual register has a minimum SCL_high and SCL_low minimum of 1;
 820          * thus, they start counting at zero. So
 821          *      SCL_high = clk_high + 1
 822          *      SCL_low  = clk_low + 1
 823          * Thus,
 824          *      SCL_freq = APB_freq /
 825          *              ((1 << base_clk_divisor) * (clk_high + 1 + clk_low + 1))
 826          * The documentation recommends clk_high >= clk_high_max / 2 and
 827          * clk_low >= clk_low_max / 2 - 1 when possible; this last constraint
 828          * gives us the following solution:
 829          */
 830         base_clk_divisor = divisor > clk_high_low_max ?
 831                         ilog2((divisor - 1) / clk_high_low_max) + 1 : 0;
 832
 833         if (base_clk_divisor > ASPEED_I2CD_TIME_BASE_DIVISOR_MASK) {
 834                 base_clk_divisor = ASPEED_I2CD_TIME_BASE_DIVISOR_MASK;
 835                 clk_low = clk_high_low_mask;
 836                 clk_high = clk_high_low_mask;
 837                 dev_err(dev,
 838                         "clamping clock divider: divider requested, %u, is greater than largest possible divider, %u.\n",
 839                         divisor, (1 << base_clk_divisor) * clk_high_low_max);
 840         } else {
 841                 tmp = (divisor + (1 << base_clk_divisor) - 1)
 842                                 >> base_clk_divisor;
 843                 clk_low = tmp / 2;
 844                 clk_high = tmp - clk_low;
 845
 846                 if (clk_high)
 847                         clk_high--;
 848
 849                 if (clk_low)
 850                         clk_low--;
 851         }
 852
 853
 854         return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT)
 855                 & ASPEED_I2CD_TIME_SCL_HIGH_MASK)
 856                         | ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT)
 857                            & ASPEED_I2CD_TIME_SCL_LOW_MASK)
 858                         | (base_clk_divisor
 859                            & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK);
 860 }
 861
 862 static u32 aspeed_i2c_24xx_get_clk_reg_val(struct device *dev, u32 divisor)
 863 {
 864         /*
 865          * clk_high and clk_low are each 3 bits wide, so each can hold a max
 866          * value of 8 giving a clk_high_low_max of 16.
 867          */
 868         return aspeed_i2c_get_clk_reg_val(dev, GENMASK(2, 0), divisor);
 869 }
 870
 871 static u32 aspeed_i2c_25xx_get_clk_reg_val(struct device *dev, u32 divisor)
 872 {
 873         /*
 874          * clk_high and clk_low are each 4 bits wide, so each can hold a max
 875          * value of 16 giving a clk_high_low_max of 32.
 876          */
 877         return aspeed_i2c_get_clk_reg_val(dev, GENMASK(3, 0), divisor);
 878 }
 879
 880 /* precondition: bus.lock has been acquired. */
 881 static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus)
 882 {
 883         u32 divisor, clk_reg_val;
 884
 885         divisor = DIV_ROUND_UP(bus->parent_clk_frequency, bus->bus_frequency);
 886         clk_reg_val = readl(bus->base + ASPEED_I2C_AC_TIMING_REG1);
 887         clk_reg_val &= (ASPEED_I2CD_TIME_TBUF_MASK |
 888                         ASPEED_I2CD_TIME_THDSTA_MASK |
 889                         ASPEED_I2CD_TIME_TACST_MASK);
 890         clk_reg_val |= bus->get_clk_reg_val(bus->dev, divisor);
 891         writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1);
 892         writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2);
 893
 894         return 0;
 895 }
 896
 897 /* precondition: bus.lock has been acquired. */
 898 static int aspeed_i2c_init(struct aspeed_i2c_bus *bus,
 899                              struct platform_device *pdev)
 900 {
 901         u32 fun_ctrl_reg = ASPEED_I2CD_MASTER_EN;
 902         int ret;
 903
 904         /* Disable everything. */
 905         writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
 906
 907         ret = aspeed_i2c_init_clk(bus);
 908         if (ret < 0)
 909                 return ret;
 910
 911         if (of_property_read_bool(pdev->dev.of_node, "multi-master"))
 912                 bus->multi_master = true;
 913         else
 914                 fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS;
 915
 916         /* Enable Master Mode */
 917         writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg,
 918                bus->base + ASPEED_I2C_FUN_CTRL_REG);
 919
 920 #if IS_ENABLED(CONFIG_I2C_SLAVE)
 921         /* If slave has already been registered, re-enable it. */
 922         if (bus->slave)
 923                 __aspeed_i2c_reg_slave(bus, bus->slave->addr);
 924 #endif /* CONFIG_I2C_SLAVE */
 925
 926         /* Set interrupt generation of I2C controller */
 927         writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG);
 928
 929         return 0;
 930 }
 931
 932 static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
 933 {
 934         struct platform_device *pdev = to_platform_device(bus->dev);
 935         unsigned long flags;
 936         int ret;
 937
 938         spin_lock_irqsave(&bus->lock, flags);
 939
 940         /* Disable and ack all interrupts. */
 941         writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
 942         writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
 943
 944         ret = aspeed_i2c_init(bus, pdev);
 945
 946         spin_unlock_irqrestore(&bus->lock, flags);
 947
 948         return ret;
 949 }
 950
 951 static const struct of_device_id aspeed_i2c_bus_of_table[] = {
 952         {
 953                 .compatible = "aspeed,ast2400-i2c-bus",
 954                 .data = aspeed_i2c_24xx_get_clk_reg_val,
 955         },
 956         {
 957                 .compatible = "aspeed,ast2500-i2c-bus",
 958                 .data = aspeed_i2c_25xx_get_clk_reg_val,
 959         },
 960         {
 961                 .compatible = "aspeed,ast2600-i2c-bus",
 962                 .data = aspeed_i2c_25xx_get_clk_reg_val,
 963         },
 964         { },
 965 };
 966 MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
 967
 968 static int aspeed_i2c_probe_bus(struct platform_device *pdev)
 969 {
 970         const struct of_device_id *match;
 971         struct aspeed_i2c_bus *bus;
 972         struct clk *parent_clk;
 973         struct resource *res;
 974         int irq, ret;
 975
 976         bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
 977         if (!bus)
 978                 return -ENOMEM;
 979
 980         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 981         bus->base = devm_ioremap_resource(&pdev->dev, res);
 982         if (IS_ERR(bus->base))
 983                 return PTR_ERR(bus->base);
 984
 985         parent_clk = devm_clk_get(&pdev->dev, NULL);
 986         if (IS_ERR(parent_clk))
 987                 return PTR_ERR(parent_clk);
 988         bus->parent_clk_frequency = clk_get_rate(parent_clk);
 989         /* We just need the clock rate, we don't actually use the clk object. */
 990         devm_clk_put(&pdev->dev, parent_clk);
 991
 992         bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL);
 993         if (IS_ERR(bus->rst)) {
 994                 dev_err(&pdev->dev,
 995                         "missing or invalid reset controller device tree entry\n");
 996                 return PTR_ERR(bus->rst);
 997         }
 998         reset_control_deassert(bus->rst);
 999
1000         ret = of_property_read_u32(pdev->dev.of_node,
1001                                    "bus-frequency", &bus->bus_frequency);
1002         if (ret < 0) {
1003                 dev_err(&pdev->dev,
1004                         "Could not read bus-frequency property\n");
1005                 bus->bus_frequency = I2C_MAX_STANDARD_MODE_FREQ;
1006         }
1007
1008         match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node);
1009         if (!match)
1010                 bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val;
1011         else
1012                 bus->get_clk_reg_val = (u32 (*)(struct device *, u32))
1013                                 match->data;
1014
1015         /* Initialize the I2C adapter */
1016         spin_lock_init(&bus->lock);
1017         init_completion(&bus->cmd_complete);
1018         bus->adap.owner = THIS_MODULE;
1019         bus->adap.retries = 0;
1020         bus->adap.algo = &aspeed_i2c_algo;
1021         bus->adap.dev.parent = &pdev->dev;
1022         bus->adap.dev.of_node = pdev->dev.of_node;
1023         strlcpy(bus->adap.name, pdev->name, sizeof(bus->adap.name));
1024         i2c_set_adapdata(&bus->adap, bus);
1025
1026         bus->dev = &pdev->dev;
1027
1028         /* Clean up any left over interrupt state. */
1029         writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
1030         writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
1031         /*
1032          * bus.lock does not need to be held because the interrupt handler has
1033          * not been enabled yet.
1034          */
1035         ret = aspeed_i2c_init(bus, pdev);
1036         if (ret < 0)
1037                 return ret;
1038
1039         irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
1040         ret = devm_request_irq(&pdev->dev, irq, aspeed_i2c_bus_irq,
1041                                0, dev_name(&pdev->dev), bus);
1042         if (ret < 0)
1043                 return ret;
1044
1045         ret = i2c_add_adapter(&bus->adap);
1046         if (ret < 0)
1047                 return ret;
1048
1049         platform_set_drvdata(pdev, bus);
1050
1051         dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
1052                  bus->adap.nr, irq);
1053
1054         return 0;
1055 }
1056
1057 static int aspeed_i2c_remove_bus(struct platform_device *pdev)
1058 {
1059         struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
1060         unsigned long flags;
1061
1062         spin_lock_irqsave(&bus->lock, flags);
1063
1064         /* Disable everything. */
1065         writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
1066         writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
1067
1068         spin_unlock_irqrestore(&bus->lock, flags);
1069
1070         reset_control_assert(bus->rst);
1071
1072         i2c_del_adapter(&bus->adap);
1073
1074         return 0;
1075 }
1076
1077 static struct platform_driver aspeed_i2c_bus_driver = {
1078         .probe          = aspeed_i2c_probe_bus,
1079         .remove         = aspeed_i2c_remove_bus,
1080         .driver         = {
1081                 .name           = "aspeed-i2c-bus",
1082                 .of_match_table = aspeed_i2c_bus_of_table,
1083         },
1084 };
1085 module_platform_driver(aspeed_i2c_bus_driver);
1086
1087 MODULE_AUTHOR("Brendan Higgins <[email protected]>");
1088 MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
1089 MODULE_LICENSE("GPL v2");