drivers/video/fbdev/pm3fb.c

   1 /*
   2  *  linux/drivers/video/pm3fb.c -- 3DLabs Permedia3 frame buffer device
   3  *
   4  *  Copyright (C) 2001 Romain Dolbeau <[email protected]>.
   5  *
   6  *  Ported to 2.6 kernel on 1 May 2007 by Krzysztof Helt <[email protected]>
   7  *      based on pm2fb.c
   8  *
   9  *  Based on code written by:
  10  *         Sven Luther, <[email protected]>
  11  *         Alan Hourihane, <[email protected]>
  12  *         Russell King, <[email protected]>
  13  *  Based on linux/drivers/video/skeletonfb.c:
  14  *      Copyright (C) 1997 Geert Uytterhoeven
  15  *  Based on linux/driver/video/pm2fb.c:
  16  *      Copyright (C) 1998-1999 Ilario Nardinocchi ([email protected])
  17  *      Copyright (C) 1999 Jakub Jelinek ([email protected])
  18  *
  19  *  This file is subject to the terms and conditions of the GNU General Public
  20  *  License. See the file COPYING in the main directory of this archive for
  21  *  more details.
  22  *
  23  */
  24
  25 #include <linux/module.h>
  26 #include <linux/kernel.h>
  27 #include <linux/errno.h>
  28 #include <linux/string.h>
  29 #include <linux/mm.h>
  30 #include <linux/slab.h>
  31 #include <linux/delay.h>
  32 #include <linux/fb.h>
  33 #include <linux/init.h>
  34 #include <linux/pci.h>
  35
  36 #include <video/pm3fb.h>
  37
  38 #if !defined(CONFIG_PCI)
  39 #error "Only generic PCI cards supported."
  40 #endif
  41
  42 #undef PM3FB_MASTER_DEBUG
  43 #ifdef PM3FB_MASTER_DEBUG
  44 #define DPRINTK(a, b...)        \
  45         printk(KERN_DEBUG "pm3fb: %s: " a, __func__ , ## b)
  46 #else
  47 #define DPRINTK(a, b...)        no_printk(a, ##b)
  48 #endif
  49
  50 #define PM3_PIXMAP_SIZE (2048 * 4)
  51
  52 /*
  53  * Driver data
  54  */
  55 static int hwcursor = 1;
  56 static char *mode_option;
  57 static bool noaccel;
  58 static bool nomtrr;
  59
  60 /*
  61  * This structure defines the hardware state of the graphics card. Normally
  62  * you place this in a header file in linux/include/video. This file usually
  63  * also includes register information. That allows other driver subsystems
  64  * and userland applications the ability to use the same header file to
  65  * avoid duplicate work and easy porting of software.
  66  */
  67 struct pm3_par {
  68         unsigned char   __iomem *v_regs;/* virtual address of p_regs */
  69         u32             video;          /* video flags before blanking */
  70         u32             base;           /* screen base in 128 bits unit */
  71         u32             palette[16];
  72         int             wc_cookie;
  73 };
  74
  75 /*
  76  * Here we define the default structs fb_fix_screeninfo and fb_var_screeninfo
  77  * if we don't use modedb. If we do use modedb see pm3fb_init how to use it
  78  * to get a fb_var_screeninfo. Otherwise define a default var as well.
  79  */
  80 static struct fb_fix_screeninfo pm3fb_fix = {
  81         .id =           "Permedia3",
  82         .type =         FB_TYPE_PACKED_PIXELS,
  83         .visual =       FB_VISUAL_PSEUDOCOLOR,
  84         .xpanstep =     1,
  85         .ypanstep =     1,
  86         .ywrapstep =    0,
  87         .accel =        FB_ACCEL_3DLABS_PERMEDIA3,
  88 };
  89
  90 /*
  91  * Utility functions
  92  */
  93
  94 static inline u32 PM3_READ_REG(struct pm3_par *par, s32 off)
  95 {
  96         return fb_readl(par->v_regs + off);
  97 }
  98
  99 static inline void PM3_WRITE_REG(struct pm3_par *par, s32 off, u32 v)
 100 {
 101         fb_writel(v, par->v_regs + off);
 102 }
 103
 104 static inline void PM3_WAIT(struct pm3_par *par, u32 n)
 105 {
 106         while (PM3_READ_REG(par, PM3InFIFOSpace) < n)
 107                 cpu_relax();
 108 }
 109
 110 static inline void PM3_WRITE_DAC_REG(struct pm3_par *par, unsigned r, u8 v)
 111 {
 112         PM3_WAIT(par, 3);
 113         PM3_WRITE_REG(par, PM3RD_IndexHigh, (r >> 8) & 0xff);
 114         PM3_WRITE_REG(par, PM3RD_IndexLow, r & 0xff);
 115         wmb();
 116         PM3_WRITE_REG(par, PM3RD_IndexedData, v);
 117         wmb();
 118 }
 119
 120 static inline void pm3fb_set_color(struct pm3_par *par, unsigned char regno,
 121                         unsigned char r, unsigned char g, unsigned char b)
 122 {
 123         PM3_WAIT(par, 4);
 124         PM3_WRITE_REG(par, PM3RD_PaletteWriteAddress, regno);
 125         wmb();
 126         PM3_WRITE_REG(par, PM3RD_PaletteData, r);
 127         wmb();
 128         PM3_WRITE_REG(par, PM3RD_PaletteData, g);
 129         wmb();
 130         PM3_WRITE_REG(par, PM3RD_PaletteData, b);
 131         wmb();
 132 }
 133
 134 static void pm3fb_clear_colormap(struct pm3_par *par,
 135                         unsigned char r, unsigned char g, unsigned char b)
 136 {
 137         int i;
 138
 139         for (i = 0; i < 256 ; i++)
 140                 pm3fb_set_color(par, i, r, g, b);
 141
 142 }
 143
 144 /* Calculating various clock parameters */
 145 static void pm3fb_calculate_clock(unsigned long reqclock,
 146                                 unsigned char *prescale,
 147                                 unsigned char *feedback,
 148                                 unsigned char *postscale)
 149 {
 150         int f, pre, post;
 151         unsigned long freq;
 152         long freqerr = 1000;
 153         long currerr;
 154
 155         for (f = 1; f < 256; f++) {
 156                 for (pre = 1; pre < 256; pre++) {
 157                         for (post = 0; post < 5; post++) {
 158                                 freq = ((2*PM3_REF_CLOCK * f) >> post) / pre;
 159                                 currerr = (reqclock > freq)
 160                                         ? reqclock - freq
 161                                         : freq - reqclock;
 162                                 if (currerr < freqerr) {
 163                                         freqerr = currerr;
 164                                         *feedback = f;
 165                                         *prescale = pre;
 166                                         *postscale = post;
 167                                 }
 168                         }
 169                 }
 170         }
 171 }
 172
 173 static inline int pm3fb_depth(const struct fb_var_screeninfo *var)
 174 {
 175         if (var->bits_per_pixel == 16)
 176                 return var->red.length + var->green.length
 177                         + var->blue.length;
 178
 179         return var->bits_per_pixel;
 180 }
 181
 182 static inline int pm3fb_shift_bpp(unsigned bpp, int v)
 183 {
 184         switch (bpp) {
 185         case 8:
 186                 return (v >> 4);
 187         case 16:
 188                 return (v >> 3);
 189         case 32:
 190                 return (v >> 2);
 191         }
 192         DPRINTK("Unsupported depth %u\n", bpp);
 193         return 0;
 194 }
 195
 196 /* acceleration */
 197 static int pm3fb_sync(struct fb_info *info)
 198 {
 199         struct pm3_par *par = info->par;
 200
 201         PM3_WAIT(par, 2);
 202         PM3_WRITE_REG(par, PM3FilterMode, PM3FilterModeSync);
 203         PM3_WRITE_REG(par, PM3Sync, 0);
 204         mb();
 205         do {
 206                 while ((PM3_READ_REG(par, PM3OutFIFOWords)) == 0)
 207                         cpu_relax();
 208         } while ((PM3_READ_REG(par, PM3OutputFifo)) != PM3Sync_Tag);
 209
 210         return 0;
 211 }
 212
 213 static void pm3fb_init_engine(struct fb_info *info)
 214 {
 215         struct pm3_par *par = info->par;
 216         const u32 width = (info->var.xres_virtual + 7) & ~7;
 217
 218         PM3_WAIT(par, 50);
 219         PM3_WRITE_REG(par, PM3FilterMode, PM3FilterModeSync);
 220         PM3_WRITE_REG(par, PM3StatisticMode, 0x0);
 221         PM3_WRITE_REG(par, PM3DeltaMode, 0x0);
 222         PM3_WRITE_REG(par, PM3RasterizerMode, 0x0);
 223         PM3_WRITE_REG(par, PM3ScissorMode, 0x0);
 224         PM3_WRITE_REG(par, PM3LineStippleMode, 0x0);
 225         PM3_WRITE_REG(par, PM3AreaStippleMode, 0x0);
 226         PM3_WRITE_REG(par, PM3GIDMode, 0x0);
 227         PM3_WRITE_REG(par, PM3DepthMode, 0x0);
 228         PM3_WRITE_REG(par, PM3StencilMode, 0x0);
 229         PM3_WRITE_REG(par, PM3StencilData, 0x0);
 230         PM3_WRITE_REG(par, PM3ColorDDAMode, 0x0);
 231         PM3_WRITE_REG(par, PM3TextureCoordMode, 0x0);
 232         PM3_WRITE_REG(par, PM3TextureIndexMode0, 0x0);
 233         PM3_WRITE_REG(par, PM3TextureIndexMode1, 0x0);
 234         PM3_WRITE_REG(par, PM3TextureReadMode, 0x0);
 235         PM3_WRITE_REG(par, PM3LUTMode, 0x0);
 236         PM3_WRITE_REG(par, PM3TextureFilterMode, 0x0);
 237         PM3_WRITE_REG(par, PM3TextureCompositeMode, 0x0);
 238         PM3_WRITE_REG(par, PM3TextureApplicationMode, 0x0);
 239         PM3_WRITE_REG(par, PM3TextureCompositeColorMode1, 0x0);
 240         PM3_WRITE_REG(par, PM3TextureCompositeAlphaMode1, 0x0);
 241         PM3_WRITE_REG(par, PM3TextureCompositeColorMode0, 0x0);
 242         PM3_WRITE_REG(par, PM3TextureCompositeAlphaMode0, 0x0);
 243         PM3_WRITE_REG(par, PM3FogMode, 0x0);
 244         PM3_WRITE_REG(par, PM3ChromaTestMode, 0x0);
 245         PM3_WRITE_REG(par, PM3AlphaTestMode, 0x0);
 246         PM3_WRITE_REG(par, PM3AntialiasMode, 0x0);
 247         PM3_WRITE_REG(par, PM3YUVMode, 0x0);
 248         PM3_WRITE_REG(par, PM3AlphaBlendColorMode, 0x0);
 249         PM3_WRITE_REG(par, PM3AlphaBlendAlphaMode, 0x0);
 250         PM3_WRITE_REG(par, PM3DitherMode, 0x0);
 251         PM3_WRITE_REG(par, PM3LogicalOpMode, 0x0);
 252         PM3_WRITE_REG(par, PM3RouterMode, 0x0);
 253         PM3_WRITE_REG(par, PM3Window, 0x0);
 254
 255         PM3_WRITE_REG(par, PM3Config2D, 0x0);
 256
 257         PM3_WRITE_REG(par, PM3SpanColorMask, 0xffffffff);
 258
 259         PM3_WRITE_REG(par, PM3XBias, 0x0);
 260         PM3_WRITE_REG(par, PM3YBias, 0x0);
 261         PM3_WRITE_REG(par, PM3DeltaControl, 0x0);
 262
 263         PM3_WRITE_REG(par, PM3BitMaskPattern, 0xffffffff);
 264
 265         PM3_WRITE_REG(par, PM3FBDestReadEnables,
 266                            PM3FBDestReadEnables_E(0xff) |
 267                            PM3FBDestReadEnables_R(0xff) |
 268                            PM3FBDestReadEnables_ReferenceAlpha(0xff));
 269         PM3_WRITE_REG(par, PM3FBDestReadBufferAddr0, 0x0);
 270         PM3_WRITE_REG(par, PM3FBDestReadBufferOffset0, 0x0);
 271         PM3_WRITE_REG(par, PM3FBDestReadBufferWidth0,
 272                            PM3FBDestReadBufferWidth_Width(width));
 273
 274         PM3_WRITE_REG(par, PM3FBDestReadMode,
 275                            PM3FBDestReadMode_ReadEnable |
 276                            PM3FBDestReadMode_Enable0);
 277         PM3_WRITE_REG(par, PM3FBSourceReadBufferAddr, 0x0);
 278         PM3_WRITE_REG(par, PM3FBSourceReadBufferOffset, 0x0);
 279         PM3_WRITE_REG(par, PM3FBSourceReadBufferWidth,
 280                            PM3FBSourceReadBufferWidth_Width(width));
 281         PM3_WRITE_REG(par, PM3FBSourceReadMode,
 282                            PM3FBSourceReadMode_Blocking |
 283                            PM3FBSourceReadMode_ReadEnable);
 284
 285         PM3_WAIT(par, 2);
 286         {
 287                 /* invert bits in bitmask */
 288                 unsigned long rm = 1 | (3 << 7);
 289                 switch (info->var.bits_per_pixel) {
 290                 case 8:
 291                         PM3_WRITE_REG(par, PM3PixelSize,
 292                                            PM3PixelSize_GLOBAL_8BIT);
 293 #ifdef __BIG_ENDIAN
 294                         rm |= 3 << 15;
 295 #endif
 296                         break;
 297                 case 16:
 298                         PM3_WRITE_REG(par, PM3PixelSize,
 299                                            PM3PixelSize_GLOBAL_16BIT);
 300 #ifdef __BIG_ENDIAN
 301                         rm |= 2 << 15;
 302 #endif
 303                         break;
 304                 case 32:
 305                         PM3_WRITE_REG(par, PM3PixelSize,
 306                                            PM3PixelSize_GLOBAL_32BIT);
 307                         break;
 308                 default:
 309                         DPRINTK("Unsupported depth %d\n",
 310                                 info->var.bits_per_pixel);
 311                         break;
 312                 }
 313                 PM3_WRITE_REG(par, PM3RasterizerMode, rm);
 314         }
 315
 316         PM3_WAIT(par, 20);
 317         PM3_WRITE_REG(par, PM3FBSoftwareWriteMask, 0xffffffff);
 318         PM3_WRITE_REG(par, PM3FBHardwareWriteMask, 0xffffffff);
 319         PM3_WRITE_REG(par, PM3FBWriteMode,
 320                            PM3FBWriteMode_WriteEnable |
 321                            PM3FBWriteMode_OpaqueSpan |
 322                            PM3FBWriteMode_Enable0);
 323         PM3_WRITE_REG(par, PM3FBWriteBufferAddr0, 0x0);
 324         PM3_WRITE_REG(par, PM3FBWriteBufferOffset0, 0x0);
 325         PM3_WRITE_REG(par, PM3FBWriteBufferWidth0,
 326                            PM3FBWriteBufferWidth_Width(width));
 327
 328         PM3_WRITE_REG(par, PM3SizeOfFramebuffer, 0x0);
 329         {
 330                 /* size in lines of FB */
 331                 unsigned long sofb = info->screen_size /
 332                         info->fix.line_length;
 333                 if (sofb > 4095)
 334                         PM3_WRITE_REG(par, PM3SizeOfFramebuffer, 4095);
 335                 else
 336                         PM3_WRITE_REG(par, PM3SizeOfFramebuffer, sofb);
 337
 338                 switch (info->var.bits_per_pixel) {
 339                 case 8:
 340                         PM3_WRITE_REG(par, PM3DitherMode,
 341                                            (1 << 10) | (2 << 3));
 342                         break;
 343                 case 16:
 344                         PM3_WRITE_REG(par, PM3DitherMode,
 345                                            (1 << 10) | (1 << 3));
 346                         break;
 347                 case 32:
 348                         PM3_WRITE_REG(par, PM3DitherMode,
 349                                            (1 << 10) | (0 << 3));
 350                         break;
 351                 default:
 352                         DPRINTK("Unsupported depth %d\n",
 353                                 info->var.bits_per_pixel);
 354                         break;
 355                 }
 356         }
 357
 358         PM3_WRITE_REG(par, PM3dXDom, 0x0);
 359         PM3_WRITE_REG(par, PM3dXSub, 0x0);
 360         PM3_WRITE_REG(par, PM3dY, 1 << 16);
 361         PM3_WRITE_REG(par, PM3StartXDom, 0x0);
 362         PM3_WRITE_REG(par, PM3StartXSub, 0x0);
 363         PM3_WRITE_REG(par, PM3StartY, 0x0);
 364         PM3_WRITE_REG(par, PM3Count, 0x0);
 365
 366 /* Disable LocalBuffer. better safe than sorry */
 367         PM3_WRITE_REG(par, PM3LBDestReadMode, 0x0);
 368         PM3_WRITE_REG(par, PM3LBDestReadEnables, 0x0);
 369         PM3_WRITE_REG(par, PM3LBSourceReadMode, 0x0);
 370         PM3_WRITE_REG(par, PM3LBWriteMode, 0x0);
 371
 372         pm3fb_sync(info);
 373 }
 374
 375 static void pm3fb_fillrect(struct fb_info *info,
 376                                 const struct fb_fillrect *region)
 377 {
 378         struct pm3_par *par = info->par;
 379         struct fb_fillrect modded;
 380         int vxres, vyres;
 381         int rop;
 382         u32 color = (info->fix.visual == FB_VISUAL_TRUECOLOR) ?
 383                 ((u32 *)info->pseudo_palette)[region->color] : region->color;
 384
 385         if (info->state != FBINFO_STATE_RUNNING)
 386                 return;
 387         if (info->flags & FBINFO_HWACCEL_DISABLED) {
 388                 cfb_fillrect(info, region);
 389                 return;
 390         }
 391         if (region->rop == ROP_COPY )
 392                 rop = PM3Config2D_ForegroundROP(0x3); /* GXcopy */
 393         else
 394                 rop = PM3Config2D_ForegroundROP(0x6) | /* GXxor */
 395                         PM3Config2D_FBDestReadEnable;
 396
 397         vxres = info->var.xres_virtual;
 398         vyres = info->var.yres_virtual;
 399
 400         memcpy(&modded, region, sizeof(struct fb_fillrect));
 401
 402         if (!modded.width || !modded.height ||
 403             modded.dx >= vxres || modded.dy >= vyres)
 404                 return;
 405
 406         if (modded.dx + modded.width  > vxres)
 407                 modded.width  = vxres - modded.dx;
 408         if (modded.dy + modded.height > vyres)
 409                 modded.height = vyres - modded.dy;
 410
 411         if (info->var.bits_per_pixel == 8)
 412                 color |= color << 8;
 413         if (info->var.bits_per_pixel <= 16)
 414                 color |= color << 16;
 415
 416         PM3_WAIT(par, 4);
 417         /* ROP Ox3 is GXcopy */
 418         PM3_WRITE_REG(par, PM3Config2D,
 419                         PM3Config2D_UseConstantSource |
 420                         PM3Config2D_ForegroundROPEnable |
 421                         rop |
 422                         PM3Config2D_FBWriteEnable);
 423
 424         PM3_WRITE_REG(par, PM3ForegroundColor, color);
 425
 426         PM3_WRITE_REG(par, PM3RectanglePosition,
 427                         PM3RectanglePosition_XOffset(modded.dx) |
 428                         PM3RectanglePosition_YOffset(modded.dy));
 429
 430         PM3_WRITE_REG(par, PM3Render2D,
 431                       PM3Render2D_XPositive |
 432                       PM3Render2D_YPositive |
 433                       PM3Render2D_Operation_Normal |
 434                       PM3Render2D_SpanOperation |
 435                       PM3Render2D_Width(modded.width) |
 436                       PM3Render2D_Height(modded.height));
 437 }
 438
 439 static void pm3fb_copyarea(struct fb_info *info,
 440                                 const struct fb_copyarea *area)
 441 {
 442         struct pm3_par *par = info->par;
 443         struct fb_copyarea modded;
 444         u32 vxres, vyres;
 445         int x_align, o_x, o_y;
 446
 447         if (info->state != FBINFO_STATE_RUNNING)
 448                 return;
 449         if (info->flags & FBINFO_HWACCEL_DISABLED) {
 450                 cfb_copyarea(info, area);
 451                 return;
 452         }
 453
 454         memcpy(&modded, area, sizeof(struct fb_copyarea));
 455
 456         vxres = info->var.xres_virtual;
 457         vyres = info->var.yres_virtual;
 458
 459         if (!modded.width || !modded.height ||
 460             modded.sx >= vxres || modded.sy >= vyres ||
 461             modded.dx >= vxres || modded.dy >= vyres)
 462                 return;
 463
 464         if (modded.sx + modded.width > vxres)
 465                 modded.width = vxres - modded.sx;
 466         if (modded.dx + modded.width > vxres)
 467                 modded.width = vxres - modded.dx;
 468         if (modded.sy + modded.height > vyres)
 469                 modded.height = vyres - modded.sy;
 470         if (modded.dy + modded.height > vyres)
 471                 modded.height = vyres - modded.dy;
 472
 473         o_x = modded.sx - modded.dx;    /*(sx > dx ) ? (sx - dx) : (dx - sx); */
 474         o_y = modded.sy - modded.dy;    /*(sy > dy ) ? (sy - dy) : (dy - sy); */
 475
 476         x_align = (modded.sx & 0x1f);
 477
 478         PM3_WAIT(par, 6);
 479
 480         PM3_WRITE_REG(par, PM3Config2D,
 481                         PM3Config2D_UserScissorEnable |
 482                         PM3Config2D_ForegroundROPEnable |
 483                         PM3Config2D_Blocking |
 484                         PM3Config2D_ForegroundROP(0x3) | /* Ox3 is GXcopy */
 485                         PM3Config2D_FBWriteEnable);
 486
 487         PM3_WRITE_REG(par, PM3ScissorMinXY,
 488                         ((modded.dy & 0x0fff) << 16) | (modded.dx & 0x0fff));
 489         PM3_WRITE_REG(par, PM3ScissorMaxXY,
 490                         (((modded.dy + modded.height) & 0x0fff) << 16) |
 491                         ((modded.dx + modded.width) & 0x0fff));
 492
 493         PM3_WRITE_REG(par, PM3FBSourceReadBufferOffset,
 494                         PM3FBSourceReadBufferOffset_XOffset(o_x) |
 495                         PM3FBSourceReadBufferOffset_YOffset(o_y));
 496
 497         PM3_WRITE_REG(par, PM3RectanglePosition,
 498                         PM3RectanglePosition_XOffset(modded.dx - x_align) |
 499                         PM3RectanglePosition_YOffset(modded.dy));
 500
 501         PM3_WRITE_REG(par, PM3Render2D,
 502                         ((modded.sx > modded.dx) ? PM3Render2D_XPositive : 0) |
 503                         ((modded.sy > modded.dy) ? PM3Render2D_YPositive : 0) |
 504                         PM3Render2D_Operation_Normal |
 505                         PM3Render2D_SpanOperation |
 506                         PM3Render2D_FBSourceReadEnable |
 507                         PM3Render2D_Width(modded.width + x_align) |
 508                         PM3Render2D_Height(modded.height));
 509 }
 510
 511 static void pm3fb_imageblit(struct fb_info *info, const struct fb_image *image)
 512 {
 513         struct pm3_par *par = info->par;
 514         u32 height = image->height;
 515         u32 fgx, bgx;
 516         const u32 *src = (const u32 *)image->data;
 517
 518         if (info->state != FBINFO_STATE_RUNNING)
 519                 return;
 520         if (info->flags & FBINFO_HWACCEL_DISABLED) {
 521                 cfb_imageblit(info, image);
 522                 return;
 523         }
 524         switch (info->fix.visual) {
 525         case FB_VISUAL_PSEUDOCOLOR:
 526                 fgx = image->fg_color;
 527                 bgx = image->bg_color;
 528                 break;
 529         case FB_VISUAL_TRUECOLOR:
 530         default:
 531                 fgx = par->palette[image->fg_color];
 532                 bgx = par->palette[image->bg_color];
 533                 break;
 534         }
 535         if (image->depth != 1) {
 536                 cfb_imageblit(info, image);
 537                 return;
 538         }
 539
 540         if (info->var.bits_per_pixel == 8) {
 541                 fgx |= fgx << 8;
 542                 bgx |= bgx << 8;
 543         }
 544         if (info->var.bits_per_pixel <= 16) {
 545                 fgx |= fgx << 16;
 546                 bgx |= bgx << 16;
 547         }
 548
 549         PM3_WAIT(par, 7);
 550
 551         PM3_WRITE_REG(par, PM3ForegroundColor, fgx);
 552         PM3_WRITE_REG(par, PM3BackgroundColor, bgx);
 553
 554         /* ROP Ox3 is GXcopy */
 555         PM3_WRITE_REG(par, PM3Config2D,
 556                         PM3Config2D_UserScissorEnable |
 557                         PM3Config2D_UseConstantSource |
 558                         PM3Config2D_ForegroundROPEnable |
 559                         PM3Config2D_ForegroundROP(0x3) |
 560                         PM3Config2D_OpaqueSpan |
 561                         PM3Config2D_FBWriteEnable);
 562         PM3_WRITE_REG(par, PM3ScissorMinXY,
 563                         ((image->dy & 0x0fff) << 16) | (image->dx & 0x0fff));
 564         PM3_WRITE_REG(par, PM3ScissorMaxXY,
 565                         (((image->dy + image->height) & 0x0fff) << 16) |
 566                         ((image->dx + image->width) & 0x0fff));
 567         PM3_WRITE_REG(par, PM3RectanglePosition,
 568                         PM3RectanglePosition_XOffset(image->dx) |
 569                         PM3RectanglePosition_YOffset(image->dy));
 570         PM3_WRITE_REG(par, PM3Render2D,
 571                         PM3Render2D_XPositive |
 572                         PM3Render2D_YPositive |
 573                         PM3Render2D_Operation_SyncOnBitMask |
 574                         PM3Render2D_SpanOperation |
 575                         PM3Render2D_Width(image->width) |
 576                         PM3Render2D_Height(image->height));
 577
 578
 579         while (height--) {
 580                 int width = ((image->width + 7) >> 3)
 581                                 + info->pixmap.scan_align - 1;
 582                 width >>= 2;
 583
 584                 while (width >= PM3_FIFO_SIZE) {
 585                         int i = PM3_FIFO_SIZE - 1;
 586
 587                         PM3_WAIT(par, PM3_FIFO_SIZE);
 588                         while (i--) {
 589                                 PM3_WRITE_REG(par, PM3BitMaskPattern, *src);
 590                                 src++;
 591                         }
 592                         width -= PM3_FIFO_SIZE - 1;
 593                 }
 594
 595                 PM3_WAIT(par, width + 1);
 596                 while (width--) {
 597                         PM3_WRITE_REG(par, PM3BitMaskPattern, *src);
 598                         src++;
 599                 }
 600         }
 601 }
 602 /* end of acceleration functions */
 603
 604 /*
 605  *      Hardware Cursor support.
 606  */
 607 static const u8 cursor_bits_lookup[16] = {
 608         0x00, 0x40, 0x10, 0x50, 0x04, 0x44, 0x14, 0x54,
 609         0x01, 0x41, 0x11, 0x51, 0x05, 0x45, 0x15, 0x55
 610 };
 611
 612 static int pm3fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 613 {
 614         struct pm3_par *par = info->par;
 615         u8 mode;
 616
 617         if (!hwcursor)
 618                 return -EINVAL; /* just to force soft_cursor() call */
 619
 620         /* Too large of a cursor or wrong bpp :-( */
 621         if (cursor->image.width > 64 ||
 622             cursor->image.height > 64 ||
 623             cursor->image.depth > 1)
 624                 return -EINVAL;
 625
 626         mode = PM3RD_CursorMode_TYPE_X;
 627         if (cursor->enable)
 628                  mode |= PM3RD_CursorMode_CURSOR_ENABLE;
 629
 630         PM3_WRITE_DAC_REG(par, PM3RD_CursorMode, mode);
 631
 632         /*
 633          * If the cursor is not be changed this means either we want the
 634          * current cursor state (if enable is set) or we want to query what
 635          * we can do with the cursor (if enable is not set)
 636          */
 637         if (!cursor->set)
 638                 return 0;
 639
 640         if (cursor->set & FB_CUR_SETPOS) {
 641                 int x = cursor->image.dx - info->var.xoffset;
 642                 int y = cursor->image.dy - info->var.yoffset;
 643
 644                 PM3_WRITE_DAC_REG(par, PM3RD_CursorXLow, x & 0xff);
 645                 PM3_WRITE_DAC_REG(par, PM3RD_CursorXHigh, (x >> 8) & 0xf);
 646                 PM3_WRITE_DAC_REG(par, PM3RD_CursorYLow, y & 0xff);
 647                 PM3_WRITE_DAC_REG(par, PM3RD_CursorYHigh, (y >> 8) & 0xf);
 648         }
 649
 650         if (cursor->set & FB_CUR_SETHOT) {
 651                 PM3_WRITE_DAC_REG(par, PM3RD_CursorHotSpotX,
 652                                   cursor->hot.x & 0x3f);
 653                 PM3_WRITE_DAC_REG(par, PM3RD_CursorHotSpotY,
 654                                   cursor->hot.y & 0x3f);
 655         }
 656
 657         if (cursor->set & FB_CUR_SETCMAP) {
 658                 u32 fg_idx = cursor->image.fg_color;
 659                 u32 bg_idx = cursor->image.bg_color;
 660                 struct fb_cmap cmap = info->cmap;
 661
 662                 /* the X11 driver says one should use these color registers */
 663                 PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(39),
 664                                   cmap.red[fg_idx] >> 8 );
 665                 PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(40),
 666                                   cmap.green[fg_idx] >> 8 );
 667                 PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(41),
 668                                   cmap.blue[fg_idx] >> 8 );
 669
 670                 PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(42),
 671                                   cmap.red[bg_idx] >> 8 );
 672                 PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(43),
 673                                   cmap.green[bg_idx] >> 8 );
 674                 PM3_WRITE_DAC_REG(par, PM3RD_CursorPalette(44),
 675                                   cmap.blue[bg_idx] >> 8 );
 676         }
 677
 678         if (cursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
 679                 u8 *bitmap = (u8 *)cursor->image.data;
 680                 u8 *mask = (u8 *)cursor->mask;
 681                 int i;
 682                 int pos = PM3RD_CursorPattern(0);
 683
 684                 for (i = 0; i < cursor->image.height; i++) {
 685                         int j = (cursor->image.width + 7) >> 3;
 686                         int k = 8 - j;
 687
 688                         for (; j > 0; j--) {
 689                                 u8 data = *bitmap ^ *mask;
 690
 691                                 if (cursor->rop == ROP_COPY)
 692                                         data = *mask & *bitmap;
 693                                 /* Upper 4 bits of bitmap data */
 694                                 PM3_WRITE_DAC_REG(par, pos++,
 695                                         cursor_bits_lookup[data >> 4] |
 696                                         (cursor_bits_lookup[*mask >> 4] << 1));
 697                                 /* Lower 4 bits of bitmap */
 698                                 PM3_WRITE_DAC_REG(par, pos++,
 699                                         cursor_bits_lookup[data & 0xf] |
 700                                         (cursor_bits_lookup[*mask & 0xf] << 1));
 701                                 bitmap++;
 702                                 mask++;
 703                         }
 704                         for (; k > 0; k--) {
 705                                 PM3_WRITE_DAC_REG(par, pos++, 0);
 706                                 PM3_WRITE_DAC_REG(par, pos++, 0);
 707                         }
 708                 }
 709                 while (pos < PM3RD_CursorPattern(1024))
 710                         PM3_WRITE_DAC_REG(par, pos++, 0);
 711         }
 712         return 0;
 713 }
 714
 715 /* write the mode to registers */
 716 static void pm3fb_write_mode(struct fb_info *info)
 717 {
 718         struct pm3_par *par = info->par;
 719         char tempsync = 0x00;
 720         char tempmisc = 0x00;
 721         const u32 hsstart = info->var.right_margin;
 722         const u32 hsend = hsstart + info->var.hsync_len;
 723         const u32 hbend = hsend + info->var.left_margin;
 724         const u32 xres = (info->var.xres + 31) & ~31;
 725         const u32 htotal = xres + hbend;
 726         const u32 vsstart = info->var.lower_margin;
 727         const u32 vsend = vsstart + info->var.vsync_len;
 728         const u32 vbend = vsend + info->var.upper_margin;
 729         const u32 vtotal = info->var.yres + vbend;
 730         const u32 width = (info->var.xres_virtual + 7) & ~7;
 731         const unsigned bpp = info->var.bits_per_pixel;
 732
 733         PM3_WAIT(par, 20);
 734         PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xffffffff);
 735         PM3_WRITE_REG(par, PM3Aperture0, 0x00000000);
 736         PM3_WRITE_REG(par, PM3Aperture1, 0x00000000);
 737         PM3_WRITE_REG(par, PM3FIFODis, 0x00000007);
 738
 739         PM3_WRITE_REG(par, PM3HTotal,
 740                            pm3fb_shift_bpp(bpp, htotal - 1));
 741         PM3_WRITE_REG(par, PM3HsEnd,
 742                            pm3fb_shift_bpp(bpp, hsend));
 743         PM3_WRITE_REG(par, PM3HsStart,
 744                            pm3fb_shift_bpp(bpp, hsstart));
 745         PM3_WRITE_REG(par, PM3HbEnd,
 746                            pm3fb_shift_bpp(bpp, hbend));
 747         PM3_WRITE_REG(par, PM3HgEnd,
 748                            pm3fb_shift_bpp(bpp, hbend));
 749         PM3_WRITE_REG(par, PM3ScreenStride,
 750                            pm3fb_shift_bpp(bpp, width));
 751         PM3_WRITE_REG(par, PM3VTotal, vtotal - 1);
 752         PM3_WRITE_REG(par, PM3VsEnd, vsend - 1);
 753         PM3_WRITE_REG(par, PM3VsStart, vsstart - 1);
 754         PM3_WRITE_REG(par, PM3VbEnd, vbend);
 755
 756         switch (bpp) {
 757         case 8:
 758                 PM3_WRITE_REG(par, PM3ByAperture1Mode,
 759                                    PM3ByApertureMode_PIXELSIZE_8BIT);
 760                 PM3_WRITE_REG(par, PM3ByAperture2Mode,
 761                                    PM3ByApertureMode_PIXELSIZE_8BIT);
 762                 break;
 763
 764         case 16:
 765 #ifndef __BIG_ENDIAN
 766                 PM3_WRITE_REG(par, PM3ByAperture1Mode,
 767                                    PM3ByApertureMode_PIXELSIZE_16BIT);
 768                 PM3_WRITE_REG(par, PM3ByAperture2Mode,
 769                                    PM3ByApertureMode_PIXELSIZE_16BIT);
 770 #else
 771                 PM3_WRITE_REG(par, PM3ByAperture1Mode,
 772                                    PM3ByApertureMode_PIXELSIZE_16BIT |
 773                                    PM3ByApertureMode_BYTESWAP_BADC);
 774                 PM3_WRITE_REG(par, PM3ByAperture2Mode,
 775                                    PM3ByApertureMode_PIXELSIZE_16BIT |
 776                                    PM3ByApertureMode_BYTESWAP_BADC);
 777 #endif /* ! __BIG_ENDIAN */
 778                 break;
 779
 780         case 32:
 781 #ifndef __BIG_ENDIAN
 782                 PM3_WRITE_REG(par, PM3ByAperture1Mode,
 783                                    PM3ByApertureMode_PIXELSIZE_32BIT);
 784                 PM3_WRITE_REG(par, PM3ByAperture2Mode,
 785                                    PM3ByApertureMode_PIXELSIZE_32BIT);
 786 #else
 787                 PM3_WRITE_REG(par, PM3ByAperture1Mode,
 788                                    PM3ByApertureMode_PIXELSIZE_32BIT |
 789                                    PM3ByApertureMode_BYTESWAP_DCBA);
 790                 PM3_WRITE_REG(par, PM3ByAperture2Mode,
 791                                    PM3ByApertureMode_PIXELSIZE_32BIT |
 792                                    PM3ByApertureMode_BYTESWAP_DCBA);
 793 #endif /* ! __BIG_ENDIAN */
 794                 break;
 795
 796         default:
 797                 DPRINTK("Unsupported depth %d\n", bpp);
 798                 break;
 799         }
 800
 801         /*
 802          * Oxygen VX1 - it appears that setting PM3VideoControl and
 803          * then PM3RD_SyncControl to the same SYNC settings undoes
 804          * any net change - they seem to xor together.  Only set the
 805          * sync options in PM3RD_SyncControl.  --rmk
 806          */
 807         {
 808                 unsigned int video = par->video;
 809
 810                 video &= ~(PM3VideoControl_HSYNC_MASK |
 811                            PM3VideoControl_VSYNC_MASK);
 812                 video |= PM3VideoControl_HSYNC_ACTIVE_HIGH |
 813                          PM3VideoControl_VSYNC_ACTIVE_HIGH;
 814                 PM3_WRITE_REG(par, PM3VideoControl, video);
 815         }
 816         PM3_WRITE_REG(par, PM3VClkCtl,
 817                            (PM3_READ_REG(par, PM3VClkCtl) & 0xFFFFFFFC));
 818         PM3_WRITE_REG(par, PM3ScreenBase, par->base);
 819         PM3_WRITE_REG(par, PM3ChipConfig,
 820                            (PM3_READ_REG(par, PM3ChipConfig) & 0xFFFFFFFD));
 821
 822         wmb();
 823         {
 824                 unsigned char m;        /* ClkPreScale */
 825                 unsigned char n;        /* ClkFeedBackScale */
 826                 unsigned char p;        /* ClkPostScale */
 827                 unsigned long pixclock = PICOS2KHZ(info->var.pixclock);
 828
 829                 (void)pm3fb_calculate_clock(pixclock, &m, &n, &p);
 830
 831                 DPRINTK("Pixclock: %ld, Pre: %d, Feedback: %d, Post: %d\n",
 832                         pixclock, (int) m, (int) n, (int) p);
 833
 834                 PM3_WRITE_DAC_REG(par, PM3RD_DClk0PreScale, m);
 835                 PM3_WRITE_DAC_REG(par, PM3RD_DClk0FeedbackScale, n);
 836                 PM3_WRITE_DAC_REG(par, PM3RD_DClk0PostScale, p);
 837         }
 838         /*
 839            PM3_WRITE_DAC_REG(par, PM3RD_IndexControl, 0x00);
 840          */
 841         /*
 842            PM3_SLOW_WRITE_REG(par, PM3RD_IndexControl, 0x00);
 843          */
 844         if ((par->video & PM3VideoControl_HSYNC_MASK) ==
 845             PM3VideoControl_HSYNC_ACTIVE_HIGH)
 846                 tempsync |= PM3RD_SyncControl_HSYNC_ACTIVE_HIGH;
 847         if ((par->video & PM3VideoControl_VSYNC_MASK) ==
 848             PM3VideoControl_VSYNC_ACTIVE_HIGH)
 849                 tempsync |= PM3RD_SyncControl_VSYNC_ACTIVE_HIGH;
 850
 851         PM3_WRITE_DAC_REG(par, PM3RD_SyncControl, tempsync);
 852         DPRINTK("PM3RD_SyncControl: %d\n", tempsync);
 853
 854         PM3_WRITE_DAC_REG(par, PM3RD_DACControl, 0x00);
 855
 856         switch (pm3fb_depth(&info->var)) {
 857         case 8:
 858                 PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
 859                                   PM3RD_PixelSize_8_BIT_PIXELS);
 860                 PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
 861                                   PM3RD_ColorFormat_CI8_COLOR |
 862                                   PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW);
 863                 tempmisc |= PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
 864                 break;
 865         case 12:
 866                 PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
 867                                   PM3RD_PixelSize_16_BIT_PIXELS);
 868                 PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
 869                                   PM3RD_ColorFormat_4444_COLOR |
 870                                   PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW |
 871                                   PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE);
 872                 tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
 873                         PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
 874                 break;
 875         case 15:
 876                 PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
 877                                   PM3RD_PixelSize_16_BIT_PIXELS);
 878                 PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
 879                                   PM3RD_ColorFormat_5551_FRONT_COLOR |
 880                                   PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW |
 881                                   PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE);
 882                 tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
 883                         PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
 884                 break;
 885         case 16:
 886                 PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
 887                                   PM3RD_PixelSize_16_BIT_PIXELS);
 888                 PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
 889                                   PM3RD_ColorFormat_565_FRONT_COLOR |
 890                                   PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW |
 891                                   PM3RD_ColorFormat_LINEAR_COLOR_EXT_ENABLE);
 892                 tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
 893                         PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
 894                 break;
 895         case 32:
 896                 PM3_WRITE_DAC_REG(par, PM3RD_PixelSize,
 897                                   PM3RD_PixelSize_32_BIT_PIXELS);
 898                 PM3_WRITE_DAC_REG(par, PM3RD_ColorFormat,
 899                                   PM3RD_ColorFormat_8888_COLOR |
 900                                   PM3RD_ColorFormat_COLOR_ORDER_BLUE_LOW);
 901                 tempmisc |= PM3RD_MiscControl_DIRECTCOLOR_ENABLE |
 902                         PM3RD_MiscControl_HIGHCOLOR_RES_ENABLE;
 903                 break;
 904         }
 905         PM3_WRITE_DAC_REG(par, PM3RD_MiscControl, tempmisc);
 906 }
 907
 908 /*
 909  * hardware independent functions
 910  */
 911 static int pm3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 912 {
 913         u32 lpitch;
 914         unsigned bpp = var->red.length + var->green.length
 915                         + var->blue.length + var->transp.length;
 916
 917         if (bpp != var->bits_per_pixel) {
 918                 /* set predefined mode for bits_per_pixel settings */
 919
 920                 switch (var->bits_per_pixel) {
 921                 case 8:
 922                         var->red.length = 8;
 923                         var->green.length = 8;
 924                         var->blue.length = 8;
 925                         var->red.offset = 0;
 926                         var->green.offset = 0;
 927                         var->blue.offset = 0;
 928                         var->transp.offset = 0;
 929                         var->transp.length = 0;
 930                         break;
 931                 case 16:
 932                         var->red.length = 5;
 933                         var->blue.length = 5;
 934                         var->green.length = 6;
 935                         var->transp.length = 0;
 936                         break;
 937                 case 32:
 938                         var->red.length = 8;
 939                         var->green.length = 8;
 940                         var->blue.length = 8;
 941                         var->transp.length = 8;
 942                         break;
 943                 default:
 944                         DPRINTK("depth not supported: %u\n",
 945                                 var->bits_per_pixel);
 946                         return -EINVAL;
 947                 }
 948         }
 949         /* it is assumed BGRA order */
 950         if (var->bits_per_pixel > 8 ) {
 951                 var->blue.offset = 0;
 952                 var->green.offset = var->blue.length;
 953                 var->red.offset = var->green.offset + var->green.length;
 954                 var->transp.offset = var->red.offset + var->red.length;
 955         }
 956         var->height = -1;
 957         var->width = -1;
 958
 959         if (var->xres != var->xres_virtual) {
 960                 DPRINTK("virtual x resolution != "
 961                         "physical x resolution not supported\n");
 962                 return -EINVAL;
 963         }
 964
 965         if (var->yres > var->yres_virtual) {
 966                 DPRINTK("virtual y resolution < "
 967                         "physical y resolution not possible\n");
 968                 return -EINVAL;
 969         }
 970
 971         if (var->xoffset) {
 972                 DPRINTK("xoffset not supported\n");
 973                 return -EINVAL;
 974         }
 975
 976         if ((var->vmode & FB_VMODE_MASK) == FB_VMODE_INTERLACED) {
 977                 DPRINTK("interlace not supported\n");
 978                 return -EINVAL;
 979         }
 980
 981         var->xres = (var->xres + 31) & ~31; /* could sometimes be 8 */
 982         lpitch = var->xres * ((var->bits_per_pixel + 7) >> 3);
 983
 984         if (var->xres < 200 || var->xres > 2048) {
 985                 DPRINTK("width not supported: %u\n", var->xres);
 986                 return -EINVAL;
 987         }
 988
 989         if (var->yres < 200 || var->yres > 4095) {
 990                 DPRINTK("height not supported: %u\n", var->yres);
 991                 return -EINVAL;
 992         }
 993
 994         if (lpitch * var->yres_virtual > info->fix.smem_len) {
 995                 DPRINTK("no memory for screen (%ux%ux%u)\n",
 996                         var->xres, var->yres_virtual, var->bits_per_pixel);
 997                 return -EINVAL;
 998         }
 999
1000         if (PICOS2KHZ(var->pixclock) > PM3_MAX_PIXCLOCK) {
1001                 DPRINTK("pixclock too high (%ldKHz)\n",
1002                         PICOS2KHZ(var->pixclock));
1003                 return -EINVAL;
1004         }
1005
1006         var->accel_flags = 0;   /* Can't mmap if this is on */
1007
1008         DPRINTK("Checking graphics mode at %dx%d depth %d\n",
1009                 var->xres, var->yres, var->bits_per_pixel);
1010         return 0;
1011 }
1012
1013 static int pm3fb_set_par(struct fb_info *info)
1014 {
1015         struct pm3_par *par = info->par;
1016         const u32 xres = (info->var.xres + 31) & ~31;
1017         const unsigned bpp = info->var.bits_per_pixel;
1018
1019         par->base = pm3fb_shift_bpp(bpp, (info->var.yoffset * xres)
1020                                         + info->var.xoffset);
1021         par->video = 0;
1022
1023         if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
1024                 par->video |= PM3VideoControl_HSYNC_ACTIVE_HIGH;
1025         else
1026                 par->video |= PM3VideoControl_HSYNC_ACTIVE_LOW;
1027
1028         if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
1029                 par->video |= PM3VideoControl_VSYNC_ACTIVE_HIGH;
1030         else
1031                 par->video |= PM3VideoControl_VSYNC_ACTIVE_LOW;
1032
1033         if ((info->var.vmode & FB_VMODE_MASK) == FB_VMODE_DOUBLE)
1034                 par->video |= PM3VideoControl_LINE_DOUBLE_ON;
1035
1036         if ((info->var.activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW)
1037                 par->video |= PM3VideoControl_ENABLE;
1038         else
1039                 DPRINTK("PM3Video disabled\n");
1040
1041         switch (bpp) {
1042         case 8:
1043                 par->video |= PM3VideoControl_PIXELSIZE_8BIT;
1044                 break;
1045         case 16:
1046                 par->video |= PM3VideoControl_PIXELSIZE_16BIT;
1047                 break;
1048         case 32:
1049                 par->video |= PM3VideoControl_PIXELSIZE_32BIT;
1050                 break;
1051         default:
1052                 DPRINTK("Unsupported depth\n");
1053                 break;
1054         }
1055
1056         info->fix.visual =
1057                 (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
1058         info->fix.line_length = ((info->var.xres_virtual + 7)  >> 3) * bpp;
1059
1060 /*      pm3fb_clear_memory(info, 0);*/
1061         pm3fb_clear_colormap(par, 0, 0, 0);
1062         PM3_WRITE_DAC_REG(par, PM3RD_CursorMode, 0);
1063         pm3fb_init_engine(info);
1064         pm3fb_write_mode(info);
1065         return 0;
1066 }
1067
1068 static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green,
1069                            unsigned blue, unsigned transp,
1070                            struct fb_info *info)
1071 {
1072         struct pm3_par *par = info->par;
1073
1074         if (regno >= 256)  /* no. of hw registers */
1075            return -EINVAL;
1076
1077         /* grayscale works only partially under directcolor */
1078         /* grayscale = 0.30*R + 0.59*G + 0.11*B */
1079         if (info->var.grayscale)
1080            red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
1081
1082         /* Directcolor:
1083          *   var->{color}.offset contains start of bitfield
1084          *   var->{color}.length contains length of bitfield
1085          *   {hardwarespecific} contains width of DAC
1086          *   pseudo_palette[X] is programmed to (X << red.offset) |
1087          *                                      (X << green.offset) |
1088          *                                      (X << blue.offset)
1089          *   RAMDAC[X] is programmed to (red, green, blue)
1090          *   color depth = SUM(var->{color}.length)
1091          *
1092          * Pseudocolor:
1093          *      var->{color}.offset is 0
1094          *      var->{color}.length contains width of DAC or the number
1095          *                      of unique colors available (color depth)
1096          *      pseudo_palette is not used
1097          *      RAMDAC[X] is programmed to (red, green, blue)
1098          *      color depth = var->{color}.length
1099          */
1100
1101         /*
1102          * This is the point where the color is converted to something that
1103          * is acceptable by the hardware.
1104          */
1105 #define CNVT_TOHW(val, width) ((((val) << (width)) + 0x7FFF - (val)) >> 16)
1106         red = CNVT_TOHW(red, info->var.red.length);
1107         green = CNVT_TOHW(green, info->var.green.length);
1108         blue = CNVT_TOHW(blue, info->var.blue.length);
1109         transp = CNVT_TOHW(transp, info->var.transp.length);
1110 #undef CNVT_TOHW
1111
1112         if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
1113         info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
1114                 u32 v;
1115
1116                 if (regno >= 16)
1117                         return -EINVAL;
1118
1119                 v = (red << info->var.red.offset) |
1120                         (green << info->var.green.offset) |
1121                         (blue << info->var.blue.offset) |
1122                         (transp << info->var.transp.offset);
1123
1124                 switch (info->var.bits_per_pixel) {
1125                 case 8:
1126                         break;
1127                 case 16:
1128                 case 32:
1129                         ((u32 *)(info->pseudo_palette))[regno] = v;
1130                         break;
1131                 }
1132                 return 0;
1133         } else if (info->fix.visual == FB_VISUAL_PSEUDOCOLOR)
1134                 pm3fb_set_color(par, regno, red, green, blue);
1135
1136         return 0;
1137 }
1138
1139 static int pm3fb_pan_display(struct fb_var_screeninfo *var,
1140                                  struct fb_info *info)
1141 {
1142         struct pm3_par *par = info->par;
1143         const u32 xres = (info->var.xres + 31) & ~31;
1144
1145         par->base = pm3fb_shift_bpp(info->var.bits_per_pixel,
1146                                         (var->yoffset * xres)
1147                                         + var->xoffset);
1148         PM3_WAIT(par, 1);
1149         PM3_WRITE_REG(par, PM3ScreenBase, par->base);
1150         return 0;
1151 }
1152
1153 static int pm3fb_blank(int blank_mode, struct fb_info *info)
1154 {
1155         struct pm3_par *par = info->par;
1156         u32 video = par->video;
1157
1158         /*
1159          * Oxygen VX1 - it appears that setting PM3VideoControl and
1160          * then PM3RD_SyncControl to the same SYNC settings undoes
1161          * any net change - they seem to xor together.  Only set the
1162          * sync options in PM3RD_SyncControl.  --rmk
1163          */
1164         video &= ~(PM3VideoControl_HSYNC_MASK |
1165                    PM3VideoControl_VSYNC_MASK);
1166         video |= PM3VideoControl_HSYNC_ACTIVE_HIGH |
1167                  PM3VideoControl_VSYNC_ACTIVE_HIGH;
1168
1169         switch (blank_mode) {
1170         case FB_BLANK_UNBLANK:
1171                 video |= PM3VideoControl_ENABLE;
1172                 break;
1173         case FB_BLANK_NORMAL:
1174                 video &= ~PM3VideoControl_ENABLE;
1175                 break;
1176         case FB_BLANK_HSYNC_SUSPEND:
1177                 video &= ~(PM3VideoControl_HSYNC_MASK |
1178                           PM3VideoControl_BLANK_ACTIVE_LOW);
1179                 break;
1180         case FB_BLANK_VSYNC_SUSPEND:
1181                 video &= ~(PM3VideoControl_VSYNC_MASK |
1182                           PM3VideoControl_BLANK_ACTIVE_LOW);
1183                 break;
1184         case FB_BLANK_POWERDOWN:
1185                 video &= ~(PM3VideoControl_HSYNC_MASK |
1186                           PM3VideoControl_VSYNC_MASK |
1187                           PM3VideoControl_BLANK_ACTIVE_LOW);
1188                 break;
1189         default:
1190                 DPRINTK("Unsupported blanking %d\n", blank_mode);
1191                 return 1;
1192         }
1193
1194         PM3_WAIT(par, 1);
1195         PM3_WRITE_REG(par, PM3VideoControl, video);
1196         return 0;
1197 }
1198
1199         /*
1200          *  Frame buffer operations
1201          */
1202
1203 static const struct fb_ops pm3fb_ops = {
1204         .owner          = THIS_MODULE,
1205         .fb_check_var   = pm3fb_check_var,
1206         .fb_set_par     = pm3fb_set_par,
1207         .fb_setcolreg   = pm3fb_setcolreg,
1208         .fb_pan_display = pm3fb_pan_display,
1209         .fb_fillrect    = pm3fb_fillrect,
1210         .fb_copyarea    = pm3fb_copyarea,
1211         .fb_imageblit   = pm3fb_imageblit,
1212         .fb_blank       = pm3fb_blank,
1213         .fb_sync        = pm3fb_sync,
1214         .fb_cursor      = pm3fb_cursor,
1215 };
1216
1217 /* ------------------------------------------------------------------------- */
1218
1219         /*
1220          *  Initialization
1221          */
1222
1223 /* mmio register are already mapped when this function is called */
1224 /* the pm3fb_fix.smem_start is also set */
1225 static unsigned long pm3fb_size_memory(struct pm3_par *par)
1226 {
1227         unsigned long   memsize = 0;
1228         unsigned long   tempBypass, i, temp1, temp2;
1229         unsigned char   __iomem *screen_mem;
1230
1231         pm3fb_fix.smem_len = 64 * 1024l * 1024; /* request full aperture size */
1232         /* Linear frame buffer - request region and map it. */
1233         if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len,
1234                                  "pm3fb smem")) {
1235                 printk(KERN_WARNING "pm3fb: Can't reserve smem.\n");
1236                 return 0;
1237         }
1238         screen_mem =
1239                 ioremap(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
1240         if (!screen_mem) {
1241                 printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n");
1242                 release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
1243                 return 0;
1244         }
1245
1246         /* TODO: card-specific stuff, *before* accessing *any* FB memory */
1247         /* For Appian Jeronimo 2000 board second head */
1248
1249         tempBypass = PM3_READ_REG(par, PM3MemBypassWriteMask);
1250
1251         DPRINTK("PM3MemBypassWriteMask was: 0x%08lx\n", tempBypass);
1252
1253         PM3_WAIT(par, 1);
1254         PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xFFFFFFFF);
1255
1256         /* pm3 split up memory, replicates, and do a lot of
1257          * nasty stuff IMHO ;-)
1258          */
1259         for (i = 0; i < 32; i++) {
1260                 fb_writel(i * 0x00345678,
1261                           (screen_mem + (i * 1048576)));
1262                 mb();
1263                 temp1 = fb_readl((screen_mem + (i * 1048576)));
1264
1265                 /* Let's check for wrapover, write will fail at 16MB boundary */
1266                 if (temp1 == (i * 0x00345678))
1267                         memsize = i;
1268                 else
1269                         break;
1270         }
1271
1272         DPRINTK("First detect pass already got %ld MB\n", memsize + 1);
1273
1274         if (memsize + 1 == i) {
1275                 for (i = 0; i < 32; i++) {
1276                         /* Clear first 32MB ; 0 is 0, no need to byteswap */
1277                         writel(0x0000000, (screen_mem + (i * 1048576)));
1278                 }
1279                 wmb();
1280
1281                 for (i = 32; i < 64; i++) {
1282                         fb_writel(i * 0x00345678,
1283                                   (screen_mem + (i * 1048576)));
1284                         mb();
1285                         temp1 =
1286                             fb_readl((screen_mem + (i * 1048576)));
1287                         temp2 =
1288                             fb_readl((screen_mem + ((i - 32) * 1048576)));
1289                         /* different value, different RAM... */
1290                         if ((temp1 == (i * 0x00345678)) && (temp2 == 0))
1291                                 memsize = i;
1292                         else
1293                                 break;
1294                 }
1295         }
1296         DPRINTK("Second detect pass got %ld MB\n", memsize + 1);
1297
1298         PM3_WAIT(par, 1);
1299         PM3_WRITE_REG(par, PM3MemBypassWriteMask, tempBypass);
1300
1301         iounmap(screen_mem);
1302         release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
1303         memsize = 1048576 * (memsize + 1);
1304
1305         DPRINTK("Returning 0x%08lx bytes\n", memsize);
1306
1307         return memsize;
1308 }
1309
1310 static int pm3fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
1311 {
1312         struct fb_info *info;
1313         struct pm3_par *par;
1314         struct device *device = &dev->dev; /* for pci drivers */
1315         int err;
1316         int retval = -ENXIO;
1317
1318         err = pci_enable_device(dev);
1319         if (err) {
1320                 printk(KERN_WARNING "pm3fb: Can't enable PCI dev: %d\n", err);
1321                 return err;
1322         }
1323         /*
1324          * Dynamically allocate info and par
1325          */
1326         info = framebuffer_alloc(sizeof(struct pm3_par), device);
1327
1328         if (!info)
1329                 return -ENOMEM;
1330         par = info->par;
1331
1332         /*
1333          * Here we set the screen_base to the virtual memory address
1334          * for the framebuffer.
1335          */
1336         pm3fb_fix.mmio_start = pci_resource_start(dev, 0);
1337         pm3fb_fix.mmio_len = PM3_REGS_SIZE;
1338 #if defined(__BIG_ENDIAN)
1339         pm3fb_fix.mmio_start += PM3_REGS_SIZE;
1340         DPRINTK("Adjusting register base for big-endian.\n");
1341 #endif
1342
1343         /* Registers - request region and map it. */
1344         if (!request_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len,
1345                                  "pm3fb regbase")) {
1346                 printk(KERN_WARNING "pm3fb: Can't reserve regbase.\n");
1347                 goto err_exit_neither;
1348         }
1349         par->v_regs =
1350                 ioremap(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len);
1351         if (!par->v_regs) {
1352                 printk(KERN_WARNING "pm3fb: Can't remap %s register area.\n",
1353                         pm3fb_fix.id);
1354                 release_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len);
1355                 goto err_exit_neither;
1356         }
1357
1358         /* Linear frame buffer - request region and map it. */
1359         pm3fb_fix.smem_start = pci_resource_start(dev, 1);
1360         pm3fb_fix.smem_len = pm3fb_size_memory(par);
1361         if (!pm3fb_fix.smem_len) {
1362                 printk(KERN_WARNING "pm3fb: Can't find memory on board.\n");
1363                 goto err_exit_mmio;
1364         }
1365         if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len,
1366                                  "pm3fb smem")) {
1367                 printk(KERN_WARNING "pm3fb: Can't reserve smem.\n");
1368                 goto err_exit_mmio;
1369         }
1370         info->screen_base = ioremap_wc(pm3fb_fix.smem_start,
1371                                        pm3fb_fix.smem_len);
1372         if (!info->screen_base) {
1373                 printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n");
1374                 release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
1375                 goto err_exit_mmio;
1376         }
1377         info->screen_size = pm3fb_fix.smem_len;
1378
1379         if (!nomtrr)
1380                 par->wc_cookie = arch_phys_wc_add(pm3fb_fix.smem_start,
1381                                                   pm3fb_fix.smem_len);
1382         info->fbops = &pm3fb_ops;
1383
1384         par->video = PM3_READ_REG(par, PM3VideoControl);
1385
1386         info->fix = pm3fb_fix;
1387         info->pseudo_palette = par->palette;
1388         info->flags = FBINFO_DEFAULT |
1389                         FBINFO_HWACCEL_XPAN |
1390                         FBINFO_HWACCEL_YPAN |
1391                         FBINFO_HWACCEL_COPYAREA |
1392                         FBINFO_HWACCEL_IMAGEBLIT |
1393                         FBINFO_HWACCEL_FILLRECT;
1394
1395         if (noaccel) {
1396                 printk(KERN_DEBUG "disabling acceleration\n");
1397                 info->flags |= FBINFO_HWACCEL_DISABLED;
1398         }
1399         info->pixmap.addr = kmalloc(PM3_PIXMAP_SIZE, GFP_KERNEL);
1400         if (!info->pixmap.addr) {
1401                 retval = -ENOMEM;
1402                 goto err_exit_pixmap;
1403         }
1404         info->pixmap.size = PM3_PIXMAP_SIZE;
1405         info->pixmap.buf_align = 4;
1406         info->pixmap.scan_align = 4;
1407         info->pixmap.access_align = 32;
1408         info->pixmap.flags = FB_PIXMAP_SYSTEM;
1409
1410         /*
1411          * This should give a reasonable default video mode. The following is
1412          * done when we can set a video mode.
1413          */
1414         if (!mode_option)
1415                 mode_option = "640x480@60";
1416
1417         retval = fb_find_mode(&info->var, info, mode_option, NULL, 0, NULL, 8);
1418
1419         if (!retval || retval == 4) {
1420                 retval = -EINVAL;
1421                 goto err_exit_both;
1422         }
1423
1424         if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
1425                 retval = -ENOMEM;
1426                 goto err_exit_both;
1427         }
1428
1429         /*
1430          * For drivers that can...
1431          */
1432         pm3fb_check_var(&info->var, info);
1433
1434         if (register_framebuffer(info) < 0) {
1435                 retval = -EINVAL;
1436                 goto err_exit_all;
1437         }
1438         fb_info(info, "%s frame buffer device\n", info->fix.id);
1439         pci_set_drvdata(dev, info);
1440         return 0;
1441
1442  err_exit_all:
1443         fb_dealloc_cmap(&info->cmap);
1444  err_exit_both:
1445         kfree(info->pixmap.addr);
1446  err_exit_pixmap:
1447         iounmap(info->screen_base);
1448         release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len);
1449  err_exit_mmio:
1450         iounmap(par->v_regs);
1451         release_mem_region(pm3fb_fix.mmio_start, pm3fb_fix.mmio_len);
1452  err_exit_neither:
1453         framebuffer_release(info);
1454         return retval;
1455 }
1456
1457         /*
1458          *  Cleanup
1459          */
1460 static void pm3fb_remove(struct pci_dev *dev)
1461 {
1462         struct fb_info *info = pci_get_drvdata(dev);
1463
1464         if (info) {
1465                 struct fb_fix_screeninfo *fix = &info->fix;
1466                 struct pm3_par *par = info->par;
1467
1468                 unregister_framebuffer(info);
1469                 fb_dealloc_cmap(&info->cmap);
1470
1471                 arch_phys_wc_del(par->wc_cookie);
1472                 iounmap(info->screen_base);
1473                 release_mem_region(fix->smem_start, fix->smem_len);
1474                 iounmap(par->v_regs);
1475                 release_mem_region(fix->mmio_start, fix->mmio_len);
1476
1477                 kfree(info->pixmap.addr);
1478                 framebuffer_release(info);
1479         }
1480 }
1481
1482 static const struct pci_device_id pm3fb_id_table[] = {
1483         { PCI_VENDOR_ID_3DLABS, 0x0a,
1484           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1485         { 0, }
1486 };
1487
1488 /* For PCI drivers */
1489 static struct pci_driver pm3fb_driver = {
1490         .name =         "pm3fb",
1491         .id_table =     pm3fb_id_table,
1492         .probe =        pm3fb_probe,
1493         .remove =       pm3fb_remove,
1494 };
1495
1496 MODULE_DEVICE_TABLE(pci, pm3fb_id_table);
1497
1498 #ifndef MODULE
1499         /*
1500          *  Setup
1501          */
1502
1503 /*
1504  * Only necessary if your driver takes special options,
1505  * otherwise we fall back on the generic fb_setup().
1506  */
1507 static int __init pm3fb_setup(char *options)
1508 {
1509         char *this_opt;
1510
1511         /* Parse user specified options (`video=pm3fb:') */
1512         if (!options || !*options)
1513                 return 0;
1514
1515         while ((this_opt = strsep(&options, ",")) != NULL) {
1516                 if (!*this_opt)
1517                         continue;
1518                 else if (!strncmp(this_opt, "noaccel", 7))
1519                         noaccel = 1;
1520                 else if (!strncmp(this_opt, "hwcursor=", 9))
1521                         hwcursor = simple_strtoul(this_opt + 9, NULL, 0);
1522                 else if (!strncmp(this_opt, "nomtrr", 6))
1523                         nomtrr = 1;
1524                 else
1525                         mode_option = this_opt;
1526         }
1527         return 0;
1528 }
1529 #endif /* MODULE */
1530
1531 static int __init pm3fb_init(void)
1532 {
1533         /*
1534          *  For kernel boot options (in 'video=pm3fb:<options>' format)
1535          */
1536 #ifndef MODULE
1537         char *option = NULL;
1538
1539         if (fb_get_options("pm3fb", &option))
1540                 return -ENODEV;
1541         pm3fb_setup(option);
1542 #endif
1543
1544         return pci_register_driver(&pm3fb_driver);
1545 }
1546
1547 #ifdef MODULE
1548 static void __exit pm3fb_exit(void)
1549 {
1550         pci_unregister_driver(&pm3fb_driver);
1551 }
1552
1553 module_exit(pm3fb_exit);
1554 #endif
1555 module_init(pm3fb_init);
1556
1557 module_param(mode_option, charp, 0);
1558 MODULE_PARM_DESC(mode_option, "Initial video mode e.g. '648x480-8@60'");
1559 module_param(noaccel, bool, 0);
1560 MODULE_PARM_DESC(noaccel, "Disable acceleration");
1561 module_param(hwcursor, int, 0644);
1562 MODULE_PARM_DESC(hwcursor, "Enable hardware cursor "
1563                         "(1=enable, 0=disable, default=1)");
1564 module_param(nomtrr, bool, 0);
1565 MODULE_PARM_DESC(nomtrr, "Disable MTRR support (0 or 1=disabled) (default=0)");
1566
1567 MODULE_DESCRIPTION("Permedia3 framebuffer device driver");
1568 MODULE_LICENSE("GPL");