arch/arm/mach-s3c/pl080.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 //
   3 // Samsung's S3C64XX generic DMA support using amba-pl08x driver.
   4 //
   5 // Copyright (c) 2013 Tomasz Figa <[email protected]>
   6
   7 #include <linux/kernel.h>
   8 #include <linux/amba/bus.h>
   9 #include <linux/amba/pl080.h>
  10 #include <linux/amba/pl08x.h>
  11 #include <linux/of.h>
  12
  13 #include "cpu.h"
  14 #include <mach/irqs.h>
  15 #include "map.h"
  16
  17 #include "regs-sys-s3c64xx.h"
  18
  19 static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
  20 {
  21         return cd->min_signal;
  22 }
  23
  24 static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch)
  25 {
  26 }
  27
  28 /*
  29  * DMA0
  30  */
  31
  32 static struct pl08x_channel_data s3c64xx_dma0_info[] = {
  33         {
  34                 .bus_id = "uart0_tx",
  35                 .min_signal = 0,
  36                 .max_signal = 0,
  37                 .periph_buses = PL08X_AHB2,
  38         }, {
  39                 .bus_id = "uart0_rx",
  40                 .min_signal = 1,
  41                 .max_signal = 1,
  42                 .periph_buses = PL08X_AHB2,
  43         }, {
  44                 .bus_id = "uart1_tx",
  45                 .min_signal = 2,
  46                 .max_signal = 2,
  47                 .periph_buses = PL08X_AHB2,
  48         }, {
  49                 .bus_id = "uart1_rx",
  50                 .min_signal = 3,
  51                 .max_signal = 3,
  52                 .periph_buses = PL08X_AHB2,
  53         }, {
  54                 .bus_id = "uart2_tx",
  55                 .min_signal = 4,
  56                 .max_signal = 4,
  57                 .periph_buses = PL08X_AHB2,
  58         }, {
  59                 .bus_id = "uart2_rx",
  60                 .min_signal = 5,
  61                 .max_signal = 5,
  62                 .periph_buses = PL08X_AHB2,
  63         }, {
  64                 .bus_id = "uart3_tx",
  65                 .min_signal = 6,
  66                 .max_signal = 6,
  67                 .periph_buses = PL08X_AHB2,
  68         }, {
  69                 .bus_id = "uart3_rx",
  70                 .min_signal = 7,
  71                 .max_signal = 7,
  72                 .periph_buses = PL08X_AHB2,
  73         }, {
  74                 .bus_id = "pcm0_tx",
  75                 .min_signal = 8,
  76                 .max_signal = 8,
  77                 .periph_buses = PL08X_AHB2,
  78         }, {
  79                 .bus_id = "pcm0_rx",
  80                 .min_signal = 9,
  81                 .max_signal = 9,
  82                 .periph_buses = PL08X_AHB2,
  83         }, {
  84                 .bus_id = "i2s0_tx",
  85                 .min_signal = 10,
  86                 .max_signal = 10,
  87                 .periph_buses = PL08X_AHB2,
  88         }, {
  89                 .bus_id = "i2s0_rx",
  90                 .min_signal = 11,
  91                 .max_signal = 11,
  92                 .periph_buses = PL08X_AHB2,
  93         }, {
  94                 .bus_id = "spi0_tx",
  95                 .min_signal = 12,
  96                 .max_signal = 12,
  97                 .periph_buses = PL08X_AHB2,
  98         }, {
  99                 .bus_id = "spi0_rx",
 100                 .min_signal = 13,
 101                 .max_signal = 13,
 102                 .periph_buses = PL08X_AHB2,
 103         }, {
 104                 .bus_id = "i2s2_tx",
 105                 .min_signal = 14,
 106                 .max_signal = 14,
 107                 .periph_buses = PL08X_AHB2,
 108         }, {
 109                 .bus_id = "i2s2_rx",
 110                 .min_signal = 15,
 111                 .max_signal = 15,
 112                 .periph_buses = PL08X_AHB2,
 113         }
 114 };
 115
 116 static const struct dma_slave_map s3c64xx_dma0_slave_map[] = {
 117         { "s3c6400-uart.0", "tx", &s3c64xx_dma0_info[0] },
 118         { "s3c6400-uart.0", "rx", &s3c64xx_dma0_info[1] },
 119         { "s3c6400-uart.1", "tx", &s3c64xx_dma0_info[2] },
 120         { "s3c6400-uart.1", "rx", &s3c64xx_dma0_info[3] },
 121         { "s3c6400-uart.2", "tx", &s3c64xx_dma0_info[4] },
 122         { "s3c6400-uart.2", "rx", &s3c64xx_dma0_info[5] },
 123         { "s3c6400-uart.3", "tx", &s3c64xx_dma0_info[6] },
 124         { "s3c6400-uart.3", "rx", &s3c64xx_dma0_info[7] },
 125         { "samsung-pcm.0", "tx", &s3c64xx_dma0_info[8] },
 126         { "samsung-pcm.0", "rx", &s3c64xx_dma0_info[9] },
 127         { "samsung-i2s.0", "tx", &s3c64xx_dma0_info[10] },
 128         { "samsung-i2s.0", "rx", &s3c64xx_dma0_info[11] },
 129         { "s3c6410-spi.0", "tx", &s3c64xx_dma0_info[12] },
 130         { "s3c6410-spi.0", "rx", &s3c64xx_dma0_info[13] },
 131         { "samsung-i2s.2", "tx", &s3c64xx_dma0_info[14] },
 132         { "samsung-i2s.2", "rx", &s3c64xx_dma0_info[15] },
 133 };
 134
 135 struct pl08x_platform_data s3c64xx_dma0_plat_data = {
 136         .memcpy_burst_size = PL08X_BURST_SZ_4,
 137         .memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
 138         .memcpy_prot_buff = true,
 139         .memcpy_prot_cache = true,
 140         .lli_buses = PL08X_AHB1,
 141         .mem_buses = PL08X_AHB1,
 142         .get_xfer_signal = pl08x_get_xfer_signal,
 143         .put_xfer_signal = pl08x_put_xfer_signal,
 144         .slave_channels = s3c64xx_dma0_info,
 145         .num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info),
 146         .slave_map = s3c64xx_dma0_slave_map,
 147         .slave_map_len = ARRAY_SIZE(s3c64xx_dma0_slave_map),
 148 };
 149
 150 static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0,
 151                         0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data);
 152
 153 /*
 154  * DMA1
 155  */
 156
 157 static struct pl08x_channel_data s3c64xx_dma1_info[] = {
 158         {
 159                 .bus_id = "pcm1_tx",
 160                 .min_signal = 0,
 161                 .max_signal = 0,
 162                 .periph_buses = PL08X_AHB2,
 163         }, {
 164                 .bus_id = "pcm1_rx",
 165                 .min_signal = 1,
 166                 .max_signal = 1,
 167                 .periph_buses = PL08X_AHB2,
 168         }, {
 169                 .bus_id = "i2s1_tx",
 170                 .min_signal = 2,
 171                 .max_signal = 2,
 172                 .periph_buses = PL08X_AHB2,
 173         }, {
 174                 .bus_id = "i2s1_rx",
 175                 .min_signal = 3,
 176                 .max_signal = 3,
 177                 .periph_buses = PL08X_AHB2,
 178         }, {
 179                 .bus_id = "spi1_tx",
 180                 .min_signal = 4,
 181                 .max_signal = 4,
 182                 .periph_buses = PL08X_AHB2,
 183         }, {
 184                 .bus_id = "spi1_rx",
 185                 .min_signal = 5,
 186                 .max_signal = 5,
 187                 .periph_buses = PL08X_AHB2,
 188         }, {
 189                 .bus_id = "ac97_out",
 190                 .min_signal = 6,
 191                 .max_signal = 6,
 192                 .periph_buses = PL08X_AHB2,
 193         }, {
 194                 .bus_id = "ac97_in",
 195                 .min_signal = 7,
 196                 .max_signal = 7,
 197                 .periph_buses = PL08X_AHB2,
 198         }, {
 199                 .bus_id = "ac97_mic",
 200                 .min_signal = 8,
 201                 .max_signal = 8,
 202                 .periph_buses = PL08X_AHB2,
 203         }, {
 204                 .bus_id = "pwm",
 205                 .min_signal = 9,
 206                 .max_signal = 9,
 207                 .periph_buses = PL08X_AHB2,
 208         }, {
 209                 .bus_id = "irda",
 210                 .min_signal = 10,
 211                 .max_signal = 10,
 212                 .periph_buses = PL08X_AHB2,
 213         }, {
 214                 .bus_id = "external",
 215                 .min_signal = 11,
 216                 .max_signal = 11,
 217                 .periph_buses = PL08X_AHB2,
 218         },
 219 };
 220
 221 static const struct dma_slave_map s3c64xx_dma1_slave_map[] = {
 222         { "samsung-pcm.1", "tx", &s3c64xx_dma1_info[0] },
 223         { "samsung-pcm.1", "rx", &s3c64xx_dma1_info[1] },
 224         { "samsung-i2s.1", "tx", &s3c64xx_dma1_info[2] },
 225         { "samsung-i2s.1", "rx", &s3c64xx_dma1_info[3] },
 226         { "s3c6410-spi.1", "tx", &s3c64xx_dma1_info[4] },
 227         { "s3c6410-spi.1", "rx", &s3c64xx_dma1_info[5] },
 228 };
 229
 230 struct pl08x_platform_data s3c64xx_dma1_plat_data = {
 231         .memcpy_burst_size = PL08X_BURST_SZ_4,
 232         .memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
 233         .memcpy_prot_buff = true,
 234         .memcpy_prot_cache = true,
 235         .lli_buses = PL08X_AHB1,
 236         .mem_buses = PL08X_AHB1,
 237         .get_xfer_signal = pl08x_get_xfer_signal,
 238         .put_xfer_signal = pl08x_put_xfer_signal,
 239         .slave_channels = s3c64xx_dma1_info,
 240         .num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info),
 241         .slave_map = s3c64xx_dma1_slave_map,
 242         .slave_map_len = ARRAY_SIZE(s3c64xx_dma1_slave_map),
 243 };
 244
 245 static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
 246                         0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data);
 247
 248 static int __init s3c64xx_pl080_init(void)
 249 {
 250         if (!soc_is_s3c64xx())
 251                 return 0;
 252
 253         /* Set all DMA configuration to be DMA, not SDMA */
 254         writel(0xffffff, S3C64XX_SDMA_SEL);
 255
 256         if (of_have_populated_dt())
 257                 return 0;
 258
 259         amba_device_register(&s3c64xx_dma0_device, &iomem_resource);
 260         amba_device_register(&s3c64xx_dma1_device, &iomem_resource);
 261
 262         return 0;
 263 }
 264 arch_initcall(s3c64xx_pl080_init);